*** alsabat: clean structure and tinyalsa support ***
cover *** alsabat: clean structure and tinyalsa support ***
From: "Lu, Han" <[email protected]>
1. Clean structure, use general function to replace local processes.
2. Add tinyalsa support, configure will read environment and decide to link to ALSA lib or tinyalsa lib.
Lu, Han (6):
alsabat: clean file process on capture thread loop
alsabat: use common wav process function in playback loop
alsabat: clean return value of playback and capture loops
alsabat: use common data generator function
alsabat: move alsa process to alsa.c
alsabat: add tinyalsa support
bat/Makefile.am | 12 +- bat/alsa.c | 217 +++++++++++--------------- bat/alsabat.1 | 3 + bat/bat.c | 58 +++---- bat/common.c | 68 +++++++++ bat/common.h | 17 ++- bat/signal.c | 13 +- bat/tinyalsa.c | 460 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ bat/tinyalsa.h | 20 +++ configure.ac | 4 + 10 files changed, 698 insertions(+), 174 deletions(-) create mode 100644 bat/tinyalsa.c create mode 100644 bat/tinyalsa.h
Signature · 1 line
2.5.0
PATCH 1/6 alsabat: clean file process on capture thread loop
From: "Lu, Han" <[email protected]>
Move file operations to sub function, and add common function to handle wav file header updating.
bat/alsa.c +31 -38
@@ -465,12 +465,29 @@ static int read_from_pcm(struct pcm_container *sndpcm,return 0 ; } -static int read_from_pcm_loop (FILE *fp,int count, -struct pcm_container *sndpcm,struct bat *bat) +static int read_from_pcm_loop (struct pcm_container *sndpcm,struct bat *bat) {int err =0 ; +FILE *fp =NULL ;int size, frames; -int remain = count; +int bytes_read =0 ; +int bytes_count = bat->frames * bat->frame_size; +int remain = bytes_count; + +remove (bat->capture.file); + fp =fopen (bat->capture.file,"wb" ); + err = -errno; +if (fp ==NULL ) { +fprintf (bat->err,_ ("Cannot open file: %s %d\n" ), + bat->capture.file, err); +return err; + } +/* leave space for file header */ +if (fseek (fp,sizeof (struct wav_container ),SEEK_SET ) !=0 ) { + err = -errno; +fclose (fp); +return err; + }while (remain >0 ) { size = (remain <= sndpcm->period_bytes) ?
@@ -489,6 +506,8 @@ static int read_from_pcm_loop(FILE *fp, int count, snd_strerror(err), err);return -EIO ; } + + bytes_read += size; remain -= size; bat->periods_played++;
@@ -497,6 +516,9 @@ static int read_from_pcm_loop(FILE *fp, int count,break ; } +update_wav_header (bat, fp, bytes_read); + +fclose (fp);return 0 ; }
@@ -505,21 +527,13 @@ static void pcm_cleanup(void *p)snd_pcm_close (p); } -static void file_cleanup (void *p) -{ -fclose (p); -} -/** * Record */ void *record_alsa (struct bat *bat) {int err =0 ; -FILE *fp =NULL ;struct pcm_container sndpcm; -struct wav_container wav; -int count;pthread_setcancelstate (PTHREAD_CANCEL_DISABLE ,NULL );
@@ -543,48 +557,27 @@ void *record_alsa(struct bat *bat) goto exit2; } -remove (bat->capture.file); - fp =fopen (bat->capture.file,"wb" ); - err = -errno; -if (fp ==NULL ) { -fprintf (bat->err,_ ("Cannot open file: %s %d\n" ), - bat->capture.file, err); - retval_record = err; - goto exit3; - } - -prepare_wav_info (&wav, bat); -pthread_setcancelstate (PTHREAD_CANCEL_ENABLE ,NULL );pthread_setcanceltype (PTHREAD_CANCEL_DEFERRED ,NULL );pthread_cleanup_push (pcm_cleanup, sndpcm.handle);pthread_cleanup_push (free, sndpcm.buffer); -pthread_cleanup_push (file_cleanup, fp); - err =write_wav_header (fp, &wav, bat); -if (err !=0 ) { - retval_record = err; - goto exit4; - } - - count = wav.chunk.length;fprintf (bat->log,_ ("Recording ...\n" )); - err =read_from_pcm_loop (fp, count, &sndpcm, bat); + err =read_from_pcm_loop (&sndpcm, bat);if (err !=0 ) { retval_record = err; - goto exit4; + goto exit3; } -/* Normally we will never reach this part of code (before fail_exit) as -this thread will be cancelled by end of play thread. */ -pthread_cleanup_pop (0 ); +/* Normally we will never reach this part of code (unless error in +* previous call) (before exit3) as this thread will be cancelled +* by end of play thread. Except in single line mode. */ pthread_cleanup_pop (0 );pthread_cleanup_pop (0 );snd_pcm_drain (sndpcm.handle); +pthread_exit (&retval_record); -exit4: -fclose (fp); exit3:free (sndpcm.buffer); exit2:
bat/common.c +16 -0
@@ -195,3 +195,19 @@ int write_wav_header(FILE *fp, struct wav_container *wav, struct bat *bat)return 0 ; } + +/* update wav header when data size changed */ +int update_wav_header (struct bat *bat,FILE *fp,int bytes) +{ +int err =0 ; +struct wav_container wav; + +prepare_wav_info (&wav, bat); + wav.chunk.length = bytes; + wav.header.length = (wav.chunk.length) +sizeof (wav.chunk) + +sizeof (wav.format) +sizeof (wav.header) -8 ; +rewind (fp); + err =write_wav_header (fp, &wav, bat); + +return err; +}
bat/common.h +1 -0
@@ -183,3 +183,4 @@ struct analyze {void prepare_wav_info (struct wav_container *,struct bat *);int read_wav_header (struct bat *,char *,FILE *,bool );int write_wav_header (FILE *,struct wav_container *,struct bat *); +int update_wav_header (struct bat *,FILE *,int );
Signature · 1 line
2.5.0
PATCH 2/6 alsabat: use common wav process function in playback loop
In reply to [email protected]From: "Lu, Han" <[email protected]>
Use common function to handle wav file process in playback loop.
bat/alsa.c +3 -16
@@ -292,11 +292,10 @@ static int write_to_pcm(const struct pcm_container *sndpcm,static int write_to_pcm_loop (struct pcm_container *sndpcm,struct bat *bat) { -int err; +int err =0 ;int bytes = sndpcm->period_bytes;/* playback buffer size */ int frames = bytes *8 / sndpcm->frame_bits;/* frame count */ FILE *fp =NULL ; -struct wav_container wav;int bytes_total =0 ;if (bat->debugplay) {
@@ -308,7 +307,7 @@ static int write_to_pcm_loop(struct pcm_container *sndpcm, struct bat *bat)return err; }/* leave space for wav header */ -if (fseek (fp,sizeof (wav),SEEK_SET ) !=0 ) { +if (fseek (fp,sizeof (struct wav_container ),SEEK_SET ) !=0 ) { err = -errno;fclose (fp);return err;
@@ -344,19 +343,7 @@ static int write_to_pcm_loop(struct pcm_container *sndpcm, struct bat *bat) }if (bat->debugplay) { -/* update wav header */ -prepare_wav_info (&wav, bat); - wav.chunk.length = bytes_total; - wav.header.length = (wav.chunk.length) +sizeof (wav.chunk) - +sizeof (wav.format) +sizeof (wav.header) -8 ; - -rewind (fp); - err =write_wav_header (fp, &wav, bat); -if (err !=0 ) { -fprintf (bat->err,_ ("Write file error: %s %s(%d)\n" ), - bat->debugplay,snd_strerror (err), err); -return err; - } +update_wav_header (bat, fp, bytes_total);fclose (fp); }
Signature · 1 line
2.5.0
PATCH 3/6 alsabat: clean return value of playback and capture loops
In reply to [email protected]From: "Lu, Han" <[email protected]>
Remove unneccessary prints, and return error code instead of 0.
bat/alsa.c +12 -19
@@ -316,18 +316,13 @@ static int write_to_pcm_loop(struct pcm_container *sndpcm, struct bat *bat)while (1 ) { err =generate_input_data (sndpcm, bytes, bat); -if (err <0 ) -return err; -else if (err >0 ) +if (err !=0 )break ;if (bat->debugplay) { - err =fwrite (sndpcm->buffer,1 , bytes, fp); -if (err != bytes) { -fprintf (bat->err,_ ("Write file error: " )); -fprintf (bat->err,_ ("%s(%d)\n" ), -snd_strerror (err), err); -return -EIO ; +if (fwrite (sndpcm->buffer,1 , bytes, fp) != bytes) { + err = -EIO ; +break ; } bytes_total += bytes; }
@@ -339,7 +334,7 @@ static int write_to_pcm_loop(struct pcm_container *sndpcm, struct bat *bat) err =write_to_pcm (sndpcm, frames, bat);if (err !=0 ) -return err; +break ; }if (bat->debugplay) {
@@ -349,7 +344,7 @@ static int write_to_pcm_loop(struct pcm_container *sndpcm, struct bat *bat)snd_pcm_drain (sndpcm->handle); -return 0 ; +return err; }/**
@@ -405,7 +400,7 @@ void *playback_alsa(struct bat *bat) } err =write_to_pcm_loop (&sndpcm, bat); -if (err !=0 ) { +if (err <0 ) { retval_play = err; goto exit4; }
@@ -484,14 +479,12 @@ static int read_from_pcm_loop(struct pcm_container *sndpcm, struct bat *bat)/* read a chunk from pcm device */ err =read_from_pcm (sndpcm, frames, bat);if (err !=0 ) -return err; +break ;/* write the chunk to file */ - err =fwrite (sndpcm->buffer,1 , size, fp); -if (err != size) { -fprintf (bat->err,_ ("Write file error: %s(%d)\n" ), -snd_strerror (err), err); -return -EIO ; +if (fwrite (sndpcm->buffer,1 , size, fp) != size) { + err = -EIO ; +break ; } bytes_read += size;
@@ -506,7 +499,7 @@ static int read_from_pcm_loop(struct pcm_container *sndpcm, struct bat *bat)update_wav_header (bat, fp, bytes_read);fclose (fp); -return 0 ; +return err; }static void pcm_cleanup (void *p)
Signature · 1 line
2.5.0
PATCH 4/6 alsabat: use common data generator function
In reply to [email protected]From: "Lu, Han" <[email protected]>
Use common data generator to replace local function.
bat/alsa.c +1 -56
@@ -16,7 +16,6 @@#include <stdio.h> #include <string.h> #include <stdbool.h> -#include <math.h> #include <stdint.h> #include <pthread.h> #include <errno.h>
@@ -28,7 +27,6 @@#include "common.h" #include "alsa.h" -#include "bat-signal.h" struct pcm_container {snd_pcm_t *handle;
@@ -206,59 +204,6 @@ static int set_snd_pcm_params(struct bat *bat, struct pcm_container *sndpcm)return 0 ; } -/* -* Generate buffer to be played either from input file or from generated data -* Return value -* <0 error -* 0 ok -* >0 break -*/ -static int generate_input_data (struct pcm_container *sndpcm,int bytes, -struct bat *bat) -{ -int err; -static int load; -int frames = bytes *8 / sndpcm->frame_bits; - -if (bat->playback.file !=NULL ) { -/* From input file */ - load =0 ; - -while (1 ) { - err =fread (sndpcm->buffer + load,1 , - bytes - load, bat->fp); -if (0 == err) { -if (feof (bat->fp)) { -fprintf (bat->log, -_ ("End of playing.\n" )); -return 1 ; - } - }else if (err < bytes - load) { -if (ferror (bat->fp)) { -fprintf (bat->err,_ ("Read file error" )); -fprintf (bat->err,_ (": %d\n" ), err); -return -EIO ; - } - load += err; - }else { -break ; - } - } - }else { -/* Generate sine wave */ -if ((bat->sinus_duration) && (load > bat->sinus_duration)) -return 1 ; - - err =generate_sine_wave (bat, frames, (void *)sndpcm->buffer); -if (err !=0 ) -return err; - - load += frames; - } - -return 0 ; -} -static int write_to_pcm (const struct pcm_container *sndpcm,int frames,struct bat *bat) {
@@ -315,7 +260,7 @@ static int write_to_pcm_loop(struct pcm_container *sndpcm, struct bat *bat) }while (1 ) { - err =generate_input_data (sndpcm, bytes, bat); + err =generate_input_data (bat, sndpcm->buffer, bytes, frames);if (err !=0 )break ;
bat/common.c +51 -0
60 lines not on this page · raw message
bat/common.h +1 -0
@@ -184,3 +184,4 @@ void prepare_wav_info(struct wav_container *, struct bat *);int read_wav_header (struct bat *,char *,FILE *,bool );int write_wav_header (FILE *,struct wav_container *,struct bat *);int update_wav_header (struct bat *,FILE *,int ); +int generate_input_data (struct bat *,void *,int ,int );
Signature · 1 line
2.5.0
PATCH 5/6 alsabat: move alsa process to alsa.c
In reply to [email protected]From: "Lu, Han" <[email protected]>
Move all alsa callings to alsa.c and only keep common processes in main frame.
bat/alsa.c +37 -4
@@ -40,15 +40,49 @@ struct pcm_container {char *buffer; }; +struct format_map_table { +enum _bat_pcm_format format_bat; +snd_pcm_format_t format_alsa; +}; + +static struct format_map_table map_tables[] = { + {BAT_PCM_FORMAT_UNKNOWN ,SND_PCM_FORMAT_UNKNOWN }, + {BAT_PCM_FORMAT_U8 ,SND_PCM_FORMAT_U8 }, + {BAT_PCM_FORMAT_S16_LE ,SND_PCM_FORMAT_S16_LE }, + {BAT_PCM_FORMAT_S24_3LE ,SND_PCM_FORMAT_S24_3LE }, + {BAT_PCM_FORMAT_S32_LE ,SND_PCM_FORMAT_S32_LE }, + {BAT_PCM_FORMAT_MAX , }, +}; + +static int format_convert (struct bat *bat,snd_pcm_format_t *fmt) +{ +struct format_map_table *t = map_tables; + +for (; t->format_bat !=BAT_PCM_FORMAT_MAX ; t++) { +if (t->format_bat == bat->format) { + *fmt = t->format_alsa; +return 0 ; + } + } +fprintf (bat->err,_ ("Invalid format!\n" )); +return -EINVAL ; +} +static int set_snd_pcm_params (struct bat *bat,struct pcm_container *sndpcm) {snd_pcm_hw_params_t *params; +snd_pcm_format_t format;unsigned int buffer_time =0 ;unsigned int period_time =0 ;unsigned int rate;int err;const char *device_name =snd_pcm_name (sndpcm->handle); +/* Convert common format to ALSA format */ + err =format_convert (bat, &format); +if (err !=0 ) +return err; +/* Allocate a hardware parameters object. */ snd_pcm_hw_params_alloca (¶ms);
@@ -72,11 +106,10 @@ static int set_snd_pcm_params(struct bat *bat, struct pcm_container *sndpcm) }/* Set format */ - err =snd_pcm_hw_params_set_format (sndpcm->handle, params, bat->format); + err =snd_pcm_hw_params_set_format (sndpcm->handle, params, format);if (err <0 ) {fprintf (bat->err,_ ("Set parameter to device error: " )); -fprintf (bat->err,_ ("PCM format: %d %s: %s(%d)\n" ), - bat->format, +fprintf (bat->err,_ ("PCM format: %d %s: %s(%d)\n" ), format, device_name,snd_strerror (err), err);return err; }
@@ -181,7 +214,7 @@ static int set_snd_pcm_params(struct bat *bat, struct pcm_container *sndpcm)return -EINVAL ; } - err =snd_pcm_format_physical_width (bat->format); + err =snd_pcm_format_physical_width (format);if (err <0 ) {fprintf (bat->err,_ ("Invalid parameters: " )); fprintf(bat->err, _("snd_pcm_format_physical_width: %d\n"),
bat/bat.c +18 -28
73 lines not on this page · raw message
bat/common.c +1 -0
@@ -17,6 +17,7 @@#include <stddef.h> #include <stdlib.h> #include <stdbool.h> +#include <errno.h> #include "aconfig.h" #include "gettext.h"
bat/common.h +10 -3
@@ -13,8 +13,6 @@* */ -#include <alsa/asoundlib.h> -#define TEMP_RECORD_FILE_NAME "/tmp/bat.wav.XXXXXX"#define DEFAULT_DEV_NAME "default"
@@ -110,6 +108,15 @@ struct wav_container {struct bat ; +enum _bat_pcm_format { +BAT_PCM_FORMAT_UNKNOWN =-1 , +BAT_PCM_FORMAT_S16_LE =0 , +BAT_PCM_FORMAT_S32_LE , +BAT_PCM_FORMAT_U8 , +BAT_PCM_FORMAT_S24_3LE , +BAT_PCM_FORMAT_MAX +}; +enum _bat_op_mode {MODE_UNKNOWN =-1 ,MODE_SINGLE =0 ,
@@ -142,7 +149,7 @@ struct bat {int frames;/* nb of frames */ int frame_size;/* size of frame */ int sample_size;/* size of sample */ -snd_pcm_format_t format;/* PCM format */ +enum _bat_pcm_format format;/* PCM format */ float sigma_k;/* threshold for peak detection */ float target_freq[MAX_CHANNELS ];
bat/signal.c +7 -6
@@ -23,9 +23,11 @@#include <stdio.h> #include <stddef.h> #include <stdlib.h> +#include <string.h> #include <math.h> #include <stdint.h> #include <stdbool.h> +#include <errno.h> #include "gettext.h" #include "common.h"
@@ -113,22 +115,21 @@ static int adjust_waveform(struct bat *bat, float *val, int frames)float factor, offset =0.0 ;switch (bat->format) { -case SND_PCM_FORMAT_U8 : +case BAT_PCM_FORMAT_U8 : max =INT8_MAX ; offset = max;/* shift for unsigned format */ break ; -case SND_PCM_FORMAT_S16_LE : +case BAT_PCM_FORMAT_S16_LE : max =INT16_MAX ;break ; -case SND_PCM_FORMAT_S24_3LE : +case BAT_PCM_FORMAT_S24_3LE : max = (1 <<23 ) -1 ;break ; -case SND_PCM_FORMAT_S32_LE : +case BAT_PCM_FORMAT_S32_LE : max =INT32_MAX ;break ;default : -fprintf (bat->err,_ ("Invalid PCM format: %s\n" ), -snd_pcm_format_name (bat->format)); +fprintf (bat->err,_ ("Invalid PCM format: %d\n" ), bat->format);return -EINVAL ; }
Signature · 1 line
2.5.0
PATCH 6/6 alsabat: add tinyalsa support
In reply to [email protected]From: "Lu, Han" <[email protected]>
Alsabat will use tinyalsa instead of ALSA, if tinyalsa is installed in system. So alsabat can run on tinyalsa platforms such as IoT/Android devices.
The patch is tested on Ubuntu with libasound.so be replaced by libtinyalsa.so.
bat/Makefile.am +9 -3
@@ -7,13 +7,11 @@ alsabat_SOURCES = \ bat.c \ common.c \ signal.c \ - convert.c \ - alsa.c + convert.c noinst_HEADERS = \ common.h \ bat-signal.h \ - alsa.h \ convert.h if HAVE_LIBFFTW3
@@ -21,6 +19,14 @@ alsabat_SOURCES += analyze.c noinst_HEADERS += analyze.h endif +if HAVE_LIBTINYALSA +alsabat_SOURCES += tinyalsa.c +noinst_HEADERS += tinyalsa.h +else +alsabat_SOURCES += alsa.c +noinst_HEADERS += alsa.h +endif + AM_CPPFLAGS = \ -Wall -I$(top_srcdir)/include
bat/alsabat.1 +3 -0
@@ -33,6 +33,9 @@ analog loopback :- https://source.android.com/devices/audio/loopback.html +If tinyalsa lib is installed in system, ALSABAT will use tinyalsa lib instead +of ALSA lib. + .SH OPTIONS .TP \fI\-h, \-\-help\fP
bat/bat.c +11 -1
@@ -31,7 +31,11 @@#include "common.h" +#ifdef HAVE_LIBTINYALSA +#include "tinyalsa.h" +#else #include "alsa.h" +#endif #include "convert.h" #ifdef HAVE_LIBFFTW3 #include "analyze.h"
@@ -301,7 +305,6 @@ static void set_defaults(struct bat *bat)/* Set default values */ bat->rate =44100 ; - bat->channels =1 ; bat->frame_size =2 ; bat->sample_size =2 ; bat->format =BAT_PCM_FORMAT_S16_LE ;
@@ -315,8 +318,15 @@ static void set_defaults(struct bat *bat) bat->capture.device =NULL ; bat->buf =NULL ; bat->local = false; +#ifdef HAVE_LIBTINYALSA + bat->channels =2 ; + bat->playback.fct = &playback_tinyalsa; + bat->capture.fct = &record_tinyalsa; +#else + bat->channels =1 ; bat->playback.fct = &playback_alsa; bat->capture.fct = &record_alsa; +#endif bat->playback.mode =MODE_LOOPBACK ; bat->capture.mode =MODE_LOOPBACK ; bat->period_is_limited = false;
bat/common.h +2 -0
@@ -125,6 +125,8 @@ enum _bat_op_mode { };struct pcm { +unsigned int card_tiny; +unsigned int device_tiny;char *device;char *file;enum _bat_op_mode mode;
bat/tinyalsa.c new file +460 -0
460 lines not on this page · raw message
bat/tinyalsa.h new file +20 -0
@@ -0,0 +1,20 @@ +/* +* Copyright (C) 2013-2015 Intel Corporation +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +extern int retval_play; +extern int retval_record; + +void *playback_tinyalsa (struct bat *); +void *record_tinyalsa (struct bat *);
configure.ac +4 -0
@@ -82,6 +82,9 @@ if test x$bat = xtrue; then dnl Check for libfftw3 have_libfftw3="yes" AC_CHECK_LIB([fftw3], [fftw_malloc], , [have_libfftw3="no"]) + dnl Check for libtinyalsa + have_libtinyalsa="yes" + AC_CHECK_LIB([tinyalsa], [pcm_open], , [have_libtinyalsa="no"]) AC_CHECK_LIB([m], [sqrtf], , [AC_MSG_ERROR([Error: Need sqrtf])]) AC_CHECK_LIB([pthread], [pthread_create], , [AC_MSG_ERROR([Error: need PTHREAD library])]) FFTW_CFLAGS="$CFLAGS"
@@ -95,6 +98,7 @@ if test x$bat = xtrue; then fi AM_CONDITIONAL(HAVE_LIBFFTW3, test "$have_libfftw3" = "yes") +AM_CONDITIONAL(HAVE_LIBTINYALSA, test "$have_libtinyalsa" = "yes") dnl Check for librt LIBRT=""
Signature · 1 line
2.5.0
Quoted 4 lines · On Tue, 22 Mar 2016 06:10:23 +0100, [email protected] wrote:
From: "Lu, Han" <[email protected]>
1. Clean structure, use general function to replace local processes.
Your patches have no description "why" at all, so I don't know why I need to merge them, either. It's one of most important information. Please explain why you need the change in each patch description to convince readers.
Quoted 2 lines
2. Add tinyalsa support, configure will read environment and decide to link to ALSA lib or tinyalsa lib.
It's not good to choose tinyalsa forcibly whenever it's found. Then there is no way to build alsabat with alsa-lib on a system that have both libraries installed.
Better to add configure option to choose the backend, not only detecting it.
thanks,
Takashi
Quoted 26 lines
Lu, Han (6):
alsabat: clean file process on capture thread loop
alsabat: use common wav process function in playback loop
alsabat: clean return value of playback and capture loops
alsabat: use common data generator function
alsabat: move alsa process toalsa.c
alsabat: add tinyalsa supportbat/Makefile.am | 12 +- bat/alsa.c | 217 +++++++++++--------------- bat/alsabat.1 | 3 + bat/bat.c | 58 +++---- bat/common.c | 68 +++++++++ bat/common.h | 17 ++- bat/signal.c | 13 +- bat/tinyalsa.c | 460 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ bat/tinyalsa.h | 20 +++ configure.ac | 4 + 10 files changed, 698 insertions(+), 174 deletions(-) create mode 100644 bat/tinyalsa.c create mode 100644 bat/tinyalsa.hSignature · 1 line
2.5.0
Quoted 11 lines
-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Tuesday, March 22, 2016 3:31 PM
To: Lu, Han <[email protected]>
Cc: [email protected]; [email protected]
Subject: Re: [PATCH 0/6] *** alsabat: clean structure and tinyalsa support
***Quoted 1 line · On Tue, 22 Mar 2016 06:10:23 +0100, [email protected] wrote:
Quoted 8 lines
Quoted 3 lines
From: "Lu, Han" <[email protected]>
1. Clean structure, use general function to replace local processes.
Your patches have no description "why" at all, so I don't know why I need to merge them, either. It's one of most important information. Please explain why you need the change in each patch description to convince readers.
Sorry! I have rewrite all descriptions and cover info. Thanks for comment.
Quoted 10 lines
Quoted 3 lines
2. Add tinyalsa support, configure will read environment and decide to link to ALSA lib or tinyalsa lib.
It's not good to choose tinyalsa forcibly whenever it's found. Then there is no way to build alsabat with alsa-lib on a system that have both libraries installed.
Better to add configure option to choose the backend, not only detecting it.
OK. I added configure option "--enable-tinyalsa", and by default tinyalsa is disabled.
I submitted patch v2 and please help to review.
BR,
Han
Quoted 31 lines
thanks,
Takashi
Quoted 26 lines
Lu, Han (6):
alsabat: clean file process on capture thread loop
alsabat: use common wav process function in playback loop
alsabat: clean return value of playback and capture loops
alsabat: use common data generator function
alsabat: move alsa process toalsa.c
alsabat: add tinyalsa supportbat/Makefile.am | 12 +- bat/alsa.c | 217 +++++++++++--------------- bat/alsabat.1 | 3 + bat/bat.c | 58 +++---- bat/common.c | 68 +++++++++ bat/common.h | 17 ++- bat/signal.c | 13 +- bat/tinyalsa.c | 460 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ bat/tinyalsa.h | 20 +++ configure.ac | 4 + 10 files changed, 698 insertions(+), 174 deletions(-) create mode100644
bat/tinyalsa.ccreate mode 100644bat/tinyalsa.h--
2.5.0
Quoted 8 lines · Han
Quoted 8 lines
Quoted 3 lines
2. Add tinyalsa support, configure will read environment and decide to link to ALSA lib or tinyalsa lib.
It's not good to choose tinyalsa forcibly whenever it's found. Then there is no way to build alsabat with alsa-lib on a system that have both libraries installed.
Quoted 6 lines
Quoted 2 lines
Better to add configure option to choose the backend, not only detecting it.
OK. I added configure option "--enable-tinyalsa", and by default tinyalsa is disabled.
I submitted patch v2 and please help to review.
IMO, something like --with-backend=$TYPE is better. It's not intuitive that --enable-xxx is mutual exclusive with another option.
thanks,
Takashi
Quoted 14 lines · Takashi Iwai
Quoted 11 lines · Han
Quoted 10 lines
Quoted 3 lines
2. Add tinyalsa support, configure will read environment and decide to link to ALSA lib or tinyalsa lib.
It's not good to choose tinyalsa forcibly whenever it's found. Then there is no way to build alsabat with alsa-lib on a system that have both libraries installed.
Better to add configure option to choose the backend, not only detecting it.
Quoted 6 lines
Quoted 3 lines
OK. I added configure option "--enable-tinyalsa", and by default tinyalsa is disabled.
I submitted patch v2 and please help to review.IMO, something like --with-backend=$TYPE is better. It's not intuitive that --enable-xxx is mutual exclusive with another option.
On the second thought, --with-backend sounds too ambiguous for the
configure script that governs the whole alsa-utils programs. If any,
it should be like --with-alsabat-backend=xxx.
Or, maybe it's not too bad to use --enable, but then again the option name should be more specific to alsabat.
It's a bike shed story, so I don't mind so much about it. If you have a strong preference, let me know.
Takashi