dts: sun8i-h3: add uart1/uart2/uart3 pins definitions
PATCH v3 1/3 dts: sun8i-h3: add uart1/uart2/uart3 pins definitions
In reply to a message not in the archivedts: sun8i-h3: add uart1/uart2/uart3 pins definitions
Signed-off-by Martin Ayotte <[email protected]>
--- arch/arm/boot/dts/sun8i-h3.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm/boot/dts/sun8i-h3.dtsi +21 -0
@@ -508,6 +508,27 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + uart1_pins_a: uart1@0 { + allwinner,pins = "PG6", "PG7"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart2_pins_a: uart2@0 { + allwinner,pins = "PA0", "PA1"; + allwinner,function = "uart2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PA13", "PA14"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
Signature · 1 line
2.7.4
PATCH v3 2/3 dts: sun8i-h3: add i2c0/i2c1/i2c2 pins definitions
In reply to a message not in the archivedts: sun8i-h3: add i2c0/i2c1/i2c2 pins definitions
Signed-off-by Martin Ayotte <[email protected]>
--- arch/arm/boot/dts/sun8i-h3.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
arch/arm/boot/dts/sun8i-h3.dtsi +21 -0
@@ -529,6 +529,27 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PA11", "PA12"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PA18", "PA19"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
Signature · 1 line
2.7.4
PATCH v3 3/3 dts: sun8i-h3: add i2c0/i2c1/i2c2 soc peripherals
In reply to a message not in the archivedts sun8i-h3: add i2c0/i2c1/i2c2 soc peripherals
Signed-off-by Martin Ayotte <[email protected]>
--- arch/arm/boot/dts/sun8i-h3.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)
arch/arm/boot/dts/sun8i-h3.dtsi +33 -0
@@ -668,6 +668,39 @@ status = "disabled"; }; + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 96>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 97>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bus_gates 98>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>,
Signature · 1 line
2.7.4