Skip to contentSkip to conversation

dts: sun8i-h3: add missing UARTs pins and I2C entries for AllWinner H3

PATCH New Martin Ayotte 1 participant 4 messages May 5, 2016 1 message not in the archive

Subsystems (3)
lore
Share & tools
lore
#2 lore raw

PATCH v4 1/3 dts: sun8i-h3: add uart1/uart2/uart3 pins definitions

In reply to a message not in the archive

dts: sun8i-h3: add uart1/uart2/uart3 pins definitions

---
 arch/arm/boot/dts/sun8i-h3.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm/boot/dts/sun8i-h3.dtsi +21 -0
index 4a4926b..292ed59 100644
@@ -508,6 +508,27 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PG6", "PG7";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PA0", "PA1";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PA13", "PA14";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
 						 "PF4", "PF5";
Signature · 1 line
2.7.4
#3 lore raw

PATCH v4 2/3 dts: sun8i-h3: add i2c0/i2c1/i2c2 pins definitions

In reply to a message not in the archive

dts: sun8i-h3: add i2c0/i2c1/i2c2 pins definitions

---
 arch/arm/boot/dts/sun8i-h3.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
arch/arm/boot/dts/sun8i-h3.dtsi +21 -0
index 292ed59..79a3af6 100644
@@ -529,6 +529,27 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PA11", "PA12";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PA18", "PA19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
 						 "PF4", "PF5";
Signature · 1 line
2.7.4
#4 lore raw

PATCH v4 3/3 dts: sun8i-h3: add i2c0/i2c1/i2c2 soc peripherals

In reply to a message not in the archive

dts: sun8i-h3: add i2c0/i2c1/i2c2 soc peripherals

---
 arch/arm/boot/dts/sun8i-h3.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
arch/arm/boot/dts/sun8i-h3.dtsi +33 -0
index 79a3af6..c947360d 100644
@@ -668,6 +668,39 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bus_gates 96>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bus_gates 97>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bus_gates 98>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
Signature · 1 line
2.7.4
#0 lore raw

v4 cover dts: sun8i-h3: add missing UARTs pins and I2C entries for AllWinner H3

Hi everyone,

This patch is submit to provide endusers access to additional UARTs on AllWinner H3 SoC along with I2C ports.

Regards,
Martin.

(Note: please ignore yesterday's v3, since the cover-letter had a wrong Message-Id, and the [1/3] patch wwas missing)

Martin Ayotte (3):
add uart1/uart2/uart3 pins definitions
add i2c0/i2c1/i2c2 pins definitions
add i2c0/i2c1/i2c2 soc peripherals

 arch/arm/boot/dts/sun8i-h3.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)
Signature · 1 line
2.7.4