don't break long lines on strings

index a25373a9bd84..844c7836c2a6 100644
@@ -136,8 +136,7 @@ int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
 
 	if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
 		if (extended != 0) {
-			err("TODO: extended (EUI64) MAC addresses aren't "
-				"completely supported yet");
+			err("TODO: extended (EUI64) MAC addresses aren't completely supported yet");
 			ret = -EINVAL;
 		} else
 			memcpy(fc->dvb_adapter.proposed_mac,buf,6);

index e41cd23f8e45..58d39a59fc09 100644
@@ -33,8 +33,8 @@ static int flexcop_i2c_operation(struct flexcop_device *fc,
 			return -EREMOTEIO;
 		}
 	}
-	deb_i2c("tried %d times i2c operation, "
-			"never finished or too many ack errors.\n", i);
+	deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",
+		i);
 	return -EREMOTEIO;
 }
 

index b8eff235367d..bb0d95fe64f9 100644
@@ -23,18 +23,15 @@ void flexcop_determine_revision(struct flexcop_device *fc)
 		fc->rev = FLEXCOP_III;
 		break;
 	default:
-		err("unknown FlexCop Revision: %x. Please report this to "
-				"[email protected].",
+		err("unknown FlexCop Revision: %x. Please report this to [email protected].",
 				v.misc_204.Rev_N_sig_revision_hi);
 		break;
 	}
 
 	if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps))
-		deb_info("this FlexCop has "
-				"the additional 32 hardware pid filter.\n");
+		deb_info("this FlexCop has the additional 32 hardware pid filter.\n");
 	else
-		deb_info("this FlexCop has "
-				"the 6 basic main hardware pid filter.\n");
+		deb_info("this FlexCop has the 6 basic main hardware pid filter.\n");
 	/* bus parts have to decide if hw pid filtering is used or not. */
 }
 

index 0f5114d406f8..4338ab0043b4 100644
@@ -46,8 +46,7 @@ int b2c2_flexcop_debug;
 EXPORT_SYMBOL_GPL(b2c2_flexcop_debug);
 module_param_named(debug, b2c2_flexcop_debug,  int, 0644);
 MODULE_PARM_DESC(debug,
-		"set debug level (1=info,2=tuner,4=i2c,8=ts,"
-		"16=sram,32=reg (|-able))."
+		"set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))."
 		DEBSTATUS);
 #undef DEBSTATUS
 

index 142ae28803bb..0dcf450052ac 100644
@@ -873,10 +873,7 @@ void cx25840_std_setup(struct i2c_client *client)
 					"Chroma sub-carrier freq = %d.%06d MHz\n",
 					fsc / 1000000, fsc % 1000000);
 
-			v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, "
-				"vblank %i, vactive %i, vblank656 %i, src_dec %i, "
-				"burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, "
-				"sc 0x%06x\n",
+			v4l_dbg(1, cx25840_debug, client, "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n",
 				hblank, hactive, vblank, vactive, vblank656,
 				src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
 		}

@@ -5169,11 +5166,9 @@ static int cx25840_probe(struct i2c_client *client,
 		id = CX2310X_AV;
 	} else if ((device_id & 0xff) == (device_id >> 8)) {
 		v4l_err(client,
-			"likely a confused/unresponsive cx2388[578] A/V decoder"
-			" found @ 0x%x (%s)\n",
+			"likely a confused/unresponsive cx2388[578] A/V decoder found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
-		v4l_err(client, "A method to reset it from the cx25840 driver"
-			" software is not known at this time\n");
+		v4l_err(client, "A method to reset it from the cx25840 driver software is not known at this time\n");
 		return -ENODEV;
 	} else {
 		v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n");

index 4b782012cadc..15fbd9607cee 100644
@@ -1113,8 +1113,8 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd)
 			j = 0;
 			break;
 		}
-		v4l2_info(sd, "\tNext carrier edge window:          16 clocks "
-			  "-%1d/+%1d, %u to %u Hz\n", i, j,
+		v4l2_info(sd, "\tNext carrier edge window:	    16 clocks -%1d/+%1d, %u to %u Hz\n",
+			  i, j,
 			  clock_divider_to_freq(rxclk, 16 + j),
 			  clock_divider_to_freq(rxclk, 16 - i));
 	}

@@ -1124,8 +1124,7 @@ int cx25840_ir_log_status(struct v4l2_subdev *sd)
 	v4l2_info(sd, "\tLow pass filter:                   %s\n",
 		  filtr ? "enabled" : "disabled");
 	if (filtr)
-		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, "
-			  "%u ns\n",
+		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, %u ns\n",
 			  lpf_count_to_us(filtr),
 			  lpf_count_to_ns(filtr));
 	v4l2_info(sd, "\tPulse width timer timed-out:       %s\n",

index 1e501c06d18c..d6779e35d36f 100644
@@ -268,8 +268,8 @@ int smiapp_write_no_quirk(struct smiapp_sensor *sensor, u32 reg, u32 val)
 		if (r == 1) {
 			if (retries)
 				dev_err(&client->dev,
-					"sensor i2c stall encountered. "
-					"retries: %d\n", retries);
+					"sensor i2c stall encountered. retries: %d\n",
+					retries);
 			return 0;
 		}
 

index 7e68762b3a4b..985a3672b243 100644
@@ -1064,8 +1064,7 @@ static int ov772x_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&adapter->dev,
-			"I2C-Adapter doesn't support "
-			"I2C_FUNC_SMBUS_BYTE_DATA\n");
+			"I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
 		return -EIO;
 	}
 

index 0da632d7d33a..f11f76cdacad 100644
@@ -881,8 +881,7 @@ static int ov9740_video_probe(struct i2c_client *client)
 		goto done;
 	}
 
-	dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, "
-		 "Manufacturer 0x%02x, SMIA Version 0x%02x\n",
+	dev_info(&client->dev, "ov9740 Model ID 0x%04x, Revision 0x%02x, Manufacturer 0x%02x, SMIA Version 0x%02x\n",
 		 priv->model, priv->revision, priv->manid, priv->smiaver);
 
 	ret = v4l2_ctrl_handler_setup(&priv->hdl);

index 4002c07f3857..c9c49ed707b8 100644
@@ -947,8 +947,7 @@ static int tw9910_probe(struct i2c_client *client,
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 		dev_err(&client->dev,
-			"I2C-Adapter doesn't support "
-			"I2C_FUNC_SMBUS_BYTE_DATA\n");
+			"I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n");
 		return -EIO;
 	}
 

index 2881e0d956ad..913dc97f8b49 100644
@@ -57,8 +57,7 @@ int flexcop_dma_config(struct flexcop_device *fc,
 		fc->write_ibi_reg(fc,dma2_014,v0x4);
 		fc->write_ibi_reg(fc,dma2_01c,v0xc);
 	} else {
-		err("either DMA1 or DMA2 can be configured within one "
-			"flexcop_dma_config call.");
+		err("either DMA1 or DMA2 can be configured within one flexcop_dma_config call.");
 		return -EINVAL;
 	}
 

@@ -82,8 +81,7 @@ int flexcop_dma_xfer_control(struct flexcop_device *fc,
 		r0x0 = dma2_010;
 		r0xc = dma2_01c;
 	} else {
-		err("either transfer DMA1 or DMA2 can be started within one "
-			"flexcop_dma_xfer_control call.");
+		err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call.");
 		return -EINVAL;
 	}
 

index 4cac1fc233f2..99ce28442a75 100644
@@ -185,8 +185,7 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 			fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2;
 		u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0;
 
-		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, "
-			"last_cur_pos: %08x ",
+		deb_irq("%u irq: %08x cur_addr: %llx: cur_pos: %08x, last_cur_pos: %08x ",
 				jiffies_to_usecs(jiffies - fc_pci->last_irq),
 				v.raw, (unsigned long long)cur_addr, cur_pos,
 				fc_pci->last_dma1_cur_pos);

@@ -220,8 +219,8 @@ static irqreturn_t flexcop_pci_isr(int irq, void *dev_id)
 		fc_pci->last_dma1_cur_pos = cur_pos;
 		fc_pci->count++;
 	} else {
-		deb_irq("isr for flexcop called, "
-			"apparently without reason (%08x)\n", v.raw);
+		deb_irq("isr for flexcop called, apparently without reason (%08x)\n",
+			v.raw);
 		ret = IRQ_NONE;
 	}
 

index 8a17cc0bfa07..4ad50f978e0e 100644
@@ -125,10 +125,8 @@ module_param_array(remote,   int, NULL, 0444);
 module_param_array(audiodev, int, NULL, 0444);
 module_param_array(audiomux, int, NULL, 0444);
 
-MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
-		 "[enable bug compatibility for triton1 + others]");
-MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
-		 "[yet another chipset flaw workaround]");
+MODULE_PARM_DESC(triton1,"set ETBF pci config bit [enable bug compatibility for triton1 + others]");
+MODULE_PARM_DESC(vsfx,"set VSFX pci config bit [yet another chipset flaw workaround]");
 MODULE_PARM_DESC(latency,"pci latency timer");
 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");

@@ -141,8 +139,7 @@ MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 		"\t\t 2 = tda7432\n"
 		"\t\t 3 = tvaudio");
 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
-MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
-		" [some VIA/SIS chipsets are known to have problem with overlay]");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 
 /* ----------------------------------------------------------------------- */
 /* list of card IDs for bt878+ cards                                       */

index 97b91a9f9fa9..fb4aefbcc8f8 100644
@@ -148,8 +148,7 @@ MODULE_PARM_DESC(irq_debug, "irq handler debug messages, default is 0 (no)");
 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
 MODULE_PARM_DESC(gbuffers, "number of capture buffers. range 2-32, default 8");
 MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 0x208000");
-MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default "
-		 "is 1 (yes) for compatibility with older applications");
+MODULE_PARM_DESC(reset_crop, "reset cropping parameters at open(), default is 1 (yes) for compatibility with older applications");
 MODULE_PARM_DESC(automute, "mute audio on bad/missing video signal, default is 1 (yes)");
 MODULE_PARM_DESC(chroma_agc, "enables the AGC of chroma signal, default is 0 (no)");
 MODULE_PARM_DESC(agc_crush, "enables the luminance AGC crush, default is 1 (yes)");

@@ -3506,8 +3505,7 @@ static void bttv_irq_debug_low_latency(struct bttv *btv, u32 rc)
 		(unsigned long)rc);
 
 	if (0 == (btread(BT848_DSTATUS) & BT848_DSTATUS_HLOC)) {
-		pr_notice("%d: Oh, there (temporarily?) is no input signal. "
-			  "Ok, then this is harmless, don't worry ;)\n",
+		pr_notice("%d: Oh, there (temporarily?) is no input signal. Ok, then this is harmless, don't worry ;)\n",
 			  btv->c.nr);
 		return;
 	}

index d43911deb617..830437471038 100644
@@ -44,15 +44,13 @@ static int i2c_scan;
 module_param(i2c_debug, int, 0644);
 MODULE_PARM_DESC(i2c_debug, "configure i2c debug level");
 module_param(i2c_hw,    int, 0444);
-MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, "
-			"instead of software bitbang");
+MODULE_PARM_DESC(i2c_hw,"force use of hardware i2c support, instead of software bitbang");
 module_param(i2c_scan,  int, 0444);
 MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
 
 static unsigned int i2c_udelay = 5;
 module_param(i2c_udelay, int, 0444);
-MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs "
-		"(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay,"soft i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
 
 /* ----------------------------------------------------------------------- */
 /* I2C functions - bitbanging adapter (software i2c)                       */

index a75c53da224a..4da720e4867e 100644
@@ -185,8 +185,8 @@ static u32 bttv_rc5_decode(unsigned int code)
 			return 0;
 		}
 	}
-	dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
-		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+	dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, instr=%x\n",
+		rc5, org_code, RC5_START(rc5),
 		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
 	return rc5;
 }

index 0b0e8015ad34..a2f80ed8684f 100644
@@ -217,8 +217,8 @@ static int cx18_alsa_load(struct cx18 *cx)
 
 	s = &cx->streams[CX18_ENC_STREAM_TYPE_PCM];
 	if (s->video_dev.v4l2_dev == NULL) {
-		CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - "
-				     "skipping\n", __func__);
+		CX18_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n",
+				     __func__);
 		return 0;
 	}
 

@@ -232,8 +232,8 @@ static int cx18_alsa_load(struct cx18 *cx)
 		CX18_ALSA_ERR("%s: failed to create struct snd_cx18_card\n",
 			      __func__);
 	} else {
-		CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance "
-				     "\n", __func__);
+		CX18_DEBUG_ALSA_INFO("%s: created cx18 ALSA interface instance \n",
+				     __func__);
 	}
 	return 0;
 }

index 30bbe8d1ea55..7f7306fd9a7f 100644
@@ -468,21 +468,19 @@ void cx18_av_std_setup(struct cx18 *cx)
 		CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n",
 				    pll / 8000000, (pll / 8) % 1000000);
 
-		CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio "
-				    "= %d.%03d\n", src_decimation / 256,
+		CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio = %d.%03d\n",
+				    src_decimation / 256,
 				    ((src_decimation % 256) * 1000) / 256);
 
 		tmp = 28636360 * (u64) sc;
 		do_div(tmp, src_decimation);
 		fsc = tmp >> 13;
 		CX18_DEBUG_INFO_DEV(sd,
-				    "Chroma sub-carrier initial freq = %d.%06d "
-				    "MHz\n", fsc / 1000000, fsc % 1000000);
+				    "Chroma sub-carrier initial freq = %d.%06d MHz\n",
+				    fsc / 1000000, fsc % 1000000);
 
-		CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, "
-				    "vactive %i, vblank656 %i, src_dec %i, "
-				    "burst 0x%02x, luma_lpf %i, uv_lpf %i, "
-				    "comb 0x%02x, sc 0x%06x\n",
+		CX18_DEBUG_INFO_DEV(sd,
+				    "hblank %i, hactive %i, vblank %i, vactive %i, vblank656 %i, src_dec %i, burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x, sc 0x%06x\n",
 				    hblank, hactive, vblank, vactive, vblank656,
 				    src_decimation, burst, luma_lpf, uv_lpf,
 				    comb, sc);

@@ -1069,8 +1067,7 @@ static void log_video_status(struct cx18 *cx)
 		CX18_INFO_DEV(sd, "Specified video input:     Composite %d\n",
 			      vid_input - CX18_AV_COMPOSITE1 + 1);
 	} else {
-		CX18_INFO_DEV(sd, "Specified video input:     "
-			      "S-Video (Luma In%d, Chroma In%d)\n",
+		CX18_INFO_DEV(sd, "Specified video input:     S-Video (Luma In%d, Chroma In%d)\n",
 			      (vid_input & 0xf0) >> 4,
 			      (vid_input & 0xf00) >> 8);
 	}

index a34fd082b76e..160e2e53383f 100644
@@ -61,8 +61,7 @@ static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw)
 		dl_control &= 0xffff3fff; /* ignore top 2 bits of address */
 		expected = 0x0f000000 | ((u32)data[addr] << 16) | addr;
 		if (expected != dl_control) {
-			CX18_ERR_DEV(sd, "verification of %s firmware load "
-				     "failed: expected %#010x got %#010x\n",
+			CX18_ERR_DEV(sd, "verification of %s firmware load failed: expected %#010x got %#010x\n",
 				     FWFILE, expected, dl_control);
 			ret = -EIO;
 			break;

index adb5a8c72c06..812a2507945a 100644
@@ -44,8 +44,7 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
 	      type == V4L2_MPEG_STREAM_TYPE_MPEG2_SVCD)) {
 		/* Only IVTV fmt VBI insertion & only MPEG-2 PS type streams */
 		cx->vbi.insert_mpeg = V4L2_MPEG_STREAM_VBI_FMT_NONE;
-		CX18_DEBUG_INFO("disabled insertion of sliced VBI data into "
-				"the MPEG stream\n");
+		CX18_DEBUG_INFO("disabled insertion of sliced VBI data into the MPEG stream\n");
 		return 0;
 	}
 

@@ -63,16 +62,14 @@ static int cx18_s_stream_vbi_fmt(struct cx2341x_handler *cxhdl, u32 fmt)
 				}
 				cx->vbi.insert_mpeg =
 						  V4L2_MPEG_STREAM_VBI_FMT_NONE;
-				CX18_WARN("Unable to allocate buffers for "
-					  "sliced VBI data insertion\n");
+				CX18_WARN("Unable to allocate buffers for sliced VBI data insertion\n");
 				return -ENOMEM;
 			}
 		}
 	}
 
 	cx->vbi.insert_mpeg = fmt;
-	CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,"
-			"when sliced VBI is enabled\n");
+	CX18_DEBUG_INFO("enabled insertion of sliced VBI data into the MPEG PS,when sliced VBI is enabled\n");
 
 	/*
 	 * If our current settings have no lines set for capture, store a valid,

index 2f23b26b16c0..b8eedbe51c8f 100644
@@ -405,8 +405,8 @@ static void cx18_process_eeprom(struct cx18 *cx)
 		CX18_ERR("Invalid EEPROM\n");
 		return;
 	default:
-		CX18_ERR("Unknown model %d, defaulting to original HVR-1600 "
-			 "(cardtype=1)\n", tv.model);
+		CX18_ERR("Unknown model %d, defaulting to original HVR-1600 (cardtype=1)\n",
+			 tv.model);
 		cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
 		break;
 	}

@@ -635,8 +635,8 @@ static void cx18_process_options(struct cx18 *cx)
 			/* convert from kB to bytes */
 			cx->stream_buf_size[i] *= 1024;
 		}
-		CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, "
-				"%d bytes\n", i, cx->options.megabytes[i],
+		CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, %d bytes\n",
+				i, cx->options.megabytes[i],
 				cx->stream_buffers[i], cx->stream_buf_size[i]);
 	}
 

@@ -838,14 +838,13 @@ static int cx18_setup_pci(struct cx18 *cx, struct pci_dev *pci_dev,
 	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency);
 
 	if (pci_latency < 64 && cx18_pci_latency) {
-		CX18_INFO("Unreasonably low latency timer, "
-			       "setting to 64 (was %d)\n", pci_latency);
+		CX18_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n",
+			  pci_latency);
 		pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, 64);
 		pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &pci_latency);
 	}
 
-	CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, "
-		   "irq: %d, latency: %d, memory: 0x%llx\n",
+	CX18_DEBUG_INFO("cx%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
 		   cx->pci_dev->device, cx->card_rev, pci_dev->bus->number,
 		   PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn),
 		   cx->pci_dev->irq, pci_latency, (u64)cx->base_addr);

@@ -910,8 +909,8 @@ static int cx18_probe(struct pci_dev *pci_dev,
 	/* FIXME - module parameter arrays constrain max instances */
 	i = atomic_inc_return(&cx18_instance) - 1;
 	if (i >= CX18_MAX_CARDS) {
-		printk(KERN_ERR "cx18: cannot manage card %d, driver has a "
-		       "limit of 0 - %d\n", i, CX18_MAX_CARDS - 1);
+		printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n",
+		       i, CX18_MAX_CARDS - 1);
 		return -ENOMEM;
 	}
 

@@ -926,8 +925,8 @@ static int cx18_probe(struct pci_dev *pci_dev,
 
 	retval = v4l2_device_register(&pci_dev->dev, &cx->v4l2_dev);
 	if (retval) {
-		printk(KERN_ERR "cx18: v4l2_device_register of card %d failed"
-		       "\n", cx->instance);
+		printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n",
+		       cx->instance);
 		kfree(cx);
 		return retval;
 	}

@@ -958,13 +957,10 @@ static int cx18_probe(struct pci_dev *pci_dev,
 	cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
 				       CX18_MEM_SIZE);
 	if (!cx->enc_mem) {
-		CX18_ERR("ioremap failed. Can't get a window into CX23418 "
-			 "memory and register space\n");
-		CX18_ERR("Each capture card with a CX23418 needs 64 MB of "
-			 "vmalloc address space for the window\n");
+		CX18_ERR("ioremap failed. Can't get a window into CX23418 memory and register space\n");
+		CX18_ERR("Each capture card with a CX23418 needs 64 MB of vmalloc address space for the window\n");
 		CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
-		CX18_ERR("Use the vmalloc= kernel command line option to set "
-			 "VmallocTotal to a larger value\n");
+		CX18_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_mem;
 	}

@@ -1000,8 +996,7 @@ static int cx18_probe(struct pci_dev *pci_dev,
 	/* Initialize GPIO Reset Controller to do chip resets during i2c init */
 	if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
 		if (cx18_gpio_register(cx, CX18_HW_GPIO_RESET_CTRL) != 0)
-			CX18_WARN("Could not register GPIO reset controller"
-				  "subdevice; proceeding anyway.\n");
+			CX18_WARN("Could not register GPIO reset controllersubdevice; proceeding anyway.\n");
 		else
 			cx->hw_flags |= CX18_HW_GPIO_RESET_CTRL;
 	}

index 3eac59c51231..03d0478170a7 100644
@@ -155,10 +155,8 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
 	}
 
 	if (ret) {
-		CX18_ERR("The MPC718 board variant with the MT352 DVB-T"
-			  "demodualtor will not work without it\n");
-		CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware "
-			  "mpc718' if you need the firmware\n");
+		CX18_ERR("The MPC718 board variant with the MT352 DVB-Tdemodualtor will not work without it\n");
+		CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n");
 	}
 	return ret;
 }

index df837408efd5..78b399b8613e 100644
@@ -49,8 +49,7 @@ int cx18_claim_stream(struct cx18_open_id *id, int type)
 
 	/* Nothing should ever try to directly claim the IDX stream */
 	if (type == CX18_ENC_STREAM_TYPE_IDX) {
-		CX18_WARN("MPEG Index stream cannot be claimed "
-			  "directly, but something tried.\n");
+		CX18_WARN("MPEG Index stream cannot be claimed directly, but something tried.\n");
 		return -EINVAL;
 	}
 

@@ -728,8 +727,7 @@ void cx18_stop_capture(struct cx18_open_id *id, int gop_end)
 			/* Stop internal use associated VBI and IDX streams */
 			if (test_bit(CX18_F_S_STREAMING, &s_vbi->s_flags) &&
 			    !test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
-				CX18_DEBUG_INFO("close stopping embedded VBI "
-						"capture\n");
+				CX18_DEBUG_INFO("close stopping embedded VBI capture\n");
 				cx18_stop_v4l2_encode_stream(s_vbi, 0);
 			}
 			if (test_bit(CX18_F_S_STREAMING, &s_idx->s_flags)) {

index fecca2a63891..0faeb979ceb9 100644
@@ -951,8 +951,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh,
 			return 0;
 		h = cx18_find_handle(cx);
 		if (h == CX18_INVALID_TASK_HANDLE) {
-			CX18_ERR("Can't find valid task handle for "
-				 "V4L2_ENC_CMD_PAUSE\n");
+			CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_PAUSE\n");
 			return -EBADFD;
 		}
 		cx18_mute(cx);

@@ -968,8 +967,7 @@ static int cx18_encoder_cmd(struct file *file, void *fh,
 			return 0;
 		h = cx18_find_handle(cx);
 		if (h == CX18_INVALID_TASK_HANDLE) {
-			CX18_ERR("Can't find valid task handle for "
-				 "V4L2_ENC_CMD_RESUME\n");
+			CX18_ERR("Can't find valid task handle for V4L2_ENC_CMD_RESUME\n");
 			return -EBADFD;
 		}
 		cx18_vapi(cx, CX18_CPU_CAPTURE_RESUME, 1, h);

index 80edfe93a3d8..361426485e98 100644
@@ -59,8 +59,8 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
 		cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2);
 
 	if (sw1 || sw2 || hw2)
-		CX18_DEBUG_HI_IRQ("received interrupts "
-				  "SW1: %x  SW2: %x  HW2: %x\n", sw1, sw2, hw2);
+		CX18_DEBUG_HI_IRQ("received interrupts SW1: %x	SW2: %x  HW2: %x\n",
+				  sw1, sw2, hw2);
 
 	/*
 	 * SW1 responses have to happen first.  The sending XPU times out the

index 1f8aa9a749a1..271b05ce2de7 100644
@@ -123,8 +123,8 @@ static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name)
 	if (!(cx18_debug & CX18_DBGFLG_API))
 		return;
 
-	CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s"
-		       "\n", name, mb->request, mb->ack, mb->cmd, mb->error,
+	CX18_DEBUG_API("%s: req %#010x ack %#010x cmd %#010x err %#010x args%s\n",
+		       name, mb->request, mb->ack, mb->cmd, mb->error,
 		       u32arr2hex(mb->args, MAX_MB_ARGUMENTS, argstr));
 }
 

@@ -255,8 +255,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
 	s = cx18_handle_to_stream(cx, handle);
 
 	if (s == NULL) {
-		CX18_WARN("Got DMA done notification for unknown/inactive"
-			  " handle %d, %s mailbox seq no %d\n", handle,
+		CX18_WARN("Got DMA done notification for unknown/inactive handle %d, %s mailbox seq no %d\n",
+			  handle,
 			  (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ?
 			  "stale" : "good", mb->request);
 		return;

@@ -290,9 +290,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
 		if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
 		    !(id >= s->mdl_base_idx &&
 		      id < (s->mdl_base_idx + s->buffers))) {
-			CX18_WARN("Fell behind! Ignoring stale mailbox with "
-				  " inconsistent data. Lost MDL for mailbox "
-				  "seq no %d\n", mb->request);
+			CX18_WARN("Fell behind! Ignoring stale mailbox with  inconsistent data. Lost MDL for mailbox seq no %d\n",
+				  mb->request);
 			break;
 		}
 		mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used);

@@ -418,9 +417,7 @@ static void mb_ack_irq(struct cx18 *cx, struct cx18_in_work_order *order)
 	/* Don't ack if the RPU has gotten impatient and timed us out */
 	if (req != cx18_readl(cx, &ack_mb->request) ||
 	    req == cx18_readl(cx, &ack_mb->ack)) {
-		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
-				"incoming %s to EPU mailbox (sequence no. %u) "
-				"while processing\n",
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u) while processing\n",
 				rpu_str[order->rpu], rpu_str[order->rpu], req);
 		order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC;
 		return;

@@ -555,8 +552,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
 
 	order = alloc_in_work_order_irq(cx);
 	if (order == NULL) {
-		CX18_WARN("Unable to find blank work order form to schedule "
-			  "incoming mailbox command processing\n");
+		CX18_WARN("Unable to find blank work order form to schedule incoming mailbox command processing\n");
 		return;
 	}
 

@@ -573,9 +569,7 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
 		(&order_mb->request)[i] = cx18_readl(cx, &mb->request + i);
 
 	if (order_mb->request == order_mb->ack) {
-		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
-				"incoming %s to EPU mailbox (sequence no. %u)"
-				"\n",
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our incoming %s to EPU mailbox (sequence no. %u)\n",
 				rpu_str[rpu], rpu_str[rpu], order_mb->request);
 		if (cx18_debug & CX18_DBGFLG_WARN)
 			dump_mb(cx, order_mb, "incoming");

@@ -663,8 +657,8 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 	if (req != ack) {
 		/* waited long enough, make the mbox "not busy" from our end */
 		cx18_writel(cx, req, &mb->ack);
-		CX18_ERR("mbox was found stuck busy when setting up for %s; "
-			 "clearing busy and trying to proceed\n", info->name);
+		CX18_ERR("mbox was found stuck busy when setting up for %s; clearing busy and trying to proceed\n",
+			 info->name);
 	} else if (ret != timeout)
 		CX18_DEBUG_API("waited %u msecs for busy mbox to be acked\n",
 			       jiffies_to_msecs(timeout-ret));

@@ -707,14 +701,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 		mutex_unlock(mb_lock);
 		if (ret >= timeout) {
 			/* Timed out */
-			CX18_DEBUG_WARN("sending %s timed out waiting %d msecs "
-					"for RPU acknowledgement\n",
+			CX18_DEBUG_WARN("sending %s timed out waiting %d msecs for RPU acknowledgement\n",
 					info->name, jiffies_to_msecs(ret));
 		} else {
-			CX18_DEBUG_WARN("woken up before mailbox ack was ready "
-					"after submitting %s to RPU.  only "
-					"waited %d msecs on req %u but awakened"
-					" with unmatched ack %u\n",
+			CX18_DEBUG_WARN("woken up before mailbox ack was ready after submitting %s to RPU.  only waited %d msecs on req %u but awakened with unmatched ack %u\n",
 					info->name,
 					jiffies_to_msecs(ret),
 					req, ack);

@@ -723,8 +713,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
 	}
 
 	if (ret >= timeout)
-		CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment "
-				"sending %s; timed out waiting %d msecs\n",
+		CX18_DEBUG_WARN("failed to be awakened upon RPU acknowledgment sending %s; timed out waiting %d msecs\n",
 				info->name, jiffies_to_msecs(ret));
 	else
 		CX18_DEBUG_HI_API("waited %u msecs for %s to be acked\n",

index 2a247d264b87..13e96d6055eb 100644
@@ -164,9 +164,8 @@ struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id,
 			mdl->skipped++;
 			if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) {
 				/* mdl must have fallen out of rotation */
-				CX18_WARN("Skipped %s, MDL %d, %d "
-					  "times - it must have dropped out of "
-					  "rotation\n", s->name, mdl->id,
+				CX18_WARN("Skipped %s, MDL %d, %d times - it must have dropped out of rotation\n",
+					  s->name, mdl->id,
 					  mdl->skipped);
 				/* Sweep it up to put it back into rotation */
 				list_move_tail(&mdl->list, &sweep_up);

@@ -352,8 +351,7 @@ int cx18_stream_alloc(struct cx18_stream *s)
 	if (s->buffers == 0)
 		return 0;
 
-	CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers "
-			"(%d.%02d kB total)\n",
+	CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%d.%02d kB total)\n",
 		s->name, s->buffers, s->buf_size,
 		s->buffers * s->buf_size / 1024,
 		(s->buffers * s->buf_size * 100 / 1024) % 100);

index f3802ec1b383..7f699f0ee76c 100644
@@ -353,8 +353,8 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
 		if (cx->card->hw_all & CX18_HW_DVB) {
 			s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
 			if (s->dvb == NULL) {
-				CX18_ERR("Couldn't allocate cx18_dvb structure"
-					 " for %s\n", s->name);
+				CX18_ERR("Couldn't allocate cx18_dvb structure for %s\n",
+					 s->name);
 				return -ENOMEM;
 			}
 		} else {

@@ -462,8 +462,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
 
 	case VFL_TYPE_VBI:
 		if (cx->stream_buffers[type])
-			CX18_INFO("Registered device %s for %s "
-				  "(%d x %d bytes)\n",
+			CX18_INFO("Registered device %s for %s (%d x %d bytes)\n",
 				  name, s->name, cx->stream_buffers[type],
 				  cx->stream_buf_size[type]);
 		else

index 631e4f24aea6..43febef2f649 100644
@@ -365,9 +365,8 @@ static void netup_read_ci_status(struct work_struct *work)
 		if (ret != 0)
 			return;
 
-		ci_dbg_print("%s: Slot Status Addr=[0x%04x], "
-				"Reg=[0x%02x], data=%02x, "
-				"TS config = %02x\n", __func__,
+		ci_dbg_print("%s: Slot Status Addr=[0x%04x], Reg=[0x%02x], data=%02x, TS config = %02x\n",
+			     __func__,
 				state->ci_i2c_addr, 0, buf[0],
 				buf[0]);
 

index da892f3e3c29..0444db081b5c 100644
@@ -770,8 +770,8 @@ static int cx23885_mbox_func(void *priv,
 	mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value);
 	if (value != 0x12345678) {
 		printk(KERN_ERR
-			"Firmware and/or mailbox pointer not initialized "
-			"or corrupted, signature = 0x%x, cmd = %s\n", value,
+			"Firmware and/or mailbox pointer not initialized or corrupted, signature = 0x%x, cmd = %s\n",
+value,
 			cmd_to_str(command));
 		return -1;
 	}

@@ -781,8 +781,8 @@ static int cx23885_mbox_func(void *priv,
 	 */
 	mc417_memory_read(dev, dev->cx23417_mailbox, &flag);
 	if (flag) {
-		printk(KERN_ERR "ERROR: Mailbox appears to be in use "
-			"(%x), cmd = %s\n", flag, cmd_to_str(command));
+		printk(KERN_ERR "ERROR: Mailbox appears to be in use (%x), cmd = %s\n",
+		       flag, cmd_to_str(command));
 		return -1;
 	}
 

@@ -935,14 +935,12 @@ static int cx23885_load_firmware(struct cx23885_dev *dev)
 		printk(KERN_ERR
 			"ERROR: Hotplug firmware request failed (%s).\n",
 			CX23885_FIRM_IMAGE_NAME);
-		printk(KERN_ERR "Please fix your hotplug setup, the board will "
-			"not work without firmware loaded!\n");
+		printk(KERN_ERR "Please fix your hotplug setup, the board will not work without firmware loaded!\n");
 		return -1;
 	}
 
 	if (firmware->size != CX23885_FIRM_IMAGE_SIZE) {
-		printk(KERN_ERR "ERROR: Firmware size mismatch "
-			"(have %zu, expected %d)\n",
+		printk(KERN_ERR "ERROR: Firmware size mismatch (have %zu, expected %d)\n",
 			firmware->size, CX23885_FIRM_IMAGE_SIZE);
 		release_firmware(firmware);
 		return -1;

@@ -1077,8 +1075,7 @@ static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder)
 		retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
 			&version);
 		if (retval < 0) {
-			printk(KERN_ERR "ERROR: cx23417 firmware get encoder :"
-				"version failed!\n");
+			printk(KERN_ERR "ERROR: cx23417 firmware get encoder :version failed!\n");
 			return -1;
 		}
 		dprintk(1, "cx23417 firmware version is 0x%08x\n", version);

index 6115d4e148ba..9d2a4e2dc54f 100644
@@ -186,8 +186,8 @@ static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip)
 	cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
 	atomic_set(&chip->count, 0);
 
-	dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
-		"byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
+	dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n",
+		buf->bpl, cx_read(audio_ch->cmds_start+12)>>1,
 		chip->num_periods, buf->bpl * chip->num_periods);
 
 	/* Enables corresponding bits at AUD_INT_STAT */

@@ -327,8 +327,7 @@ static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream)
 	int err;
 
 	if (!chip) {
-		printk(KERN_ERR "BUG: cx23885 can't find device struct."
-				" Can't proceed with open\n");
+		printk(KERN_ERR "BUG: cx23885 can't find device struct. Can't proceed with open\n");
 		return -ENODEV;
 	}
 

@@ -555,8 +554,8 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
 		return NULL;
 
 	if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) {
-		printk(KERN_WARNING "%s(): Missing SRAM channel configuration "
-			"for analog TV Audio\n", __func__);
+		printk(KERN_WARNING "%s(): Missing SRAM channel configuration for analog TV Audio\n",
+		       __func__);
 		return NULL;
 	}
 

@@ -590,8 +589,8 @@ struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev)
 
 error:
 	snd_card_free(card);
-	printk(KERN_ERR "%s(): Failed to register analog "
-			"audio adapter\n", __func__);
+	printk(KERN_ERR "%s(): Failed to register analog audio adapter\n",
+	       __func__);
 
 	return NULL;
 }

index 99ba8d6328f0..e2c4edbfbdb7 100644
@@ -1304,8 +1304,7 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
 		 */
 		break;
 	default:
-		printk(KERN_WARNING "%s: warning: "
-			"unknown hauppauge model #%d\n",
+		printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
 			dev->name, tv.model);
 		break;
 	}

@@ -2342,9 +2341,8 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 
 		ret = request_firmware(&fw, filename, &dev->pci->dev);
 		if (ret != 0)
-			printk(KERN_ERR "did not find the firmware file. (%s) "
-			"Please see linux/Documentation/dvb/ for more details "
-			"on firmware-problems.", filename);
+			printk(KERN_ERR "did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+			       filename);
 		else
 			altera_init(&netup_config, fw);
 

index c86b1093ab99..5020a60a4f1f 100644
@@ -915,8 +915,7 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 		cx23885_init_tsport(dev, &dev->ts2, 2);
 
 	if (get_resources(dev) < 0) {
-		printk(KERN_ERR "CORE %s No more PCIe resources for "
-		       "subsystem: %04x:%04x\n",
+		printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
 		       dev->name, dev->pci->subsystem_vendor,
 		       dev->pci->subsystem_device);
 

@@ -980,8 +979,8 @@ static int cx23885_dev_setup(struct cx23885_dev *dev)
 
 	if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) {
 		if (cx23885_video_register(dev) < 0) {
-			printk(KERN_ERR "%s() Failed to register analog "
-				"video adapters on VID_A\n", __func__);
+			printk(KERN_ERR "%s() Failed to register analog video adapters on VID_A\n",
+			       __func__);
 		}
 	}
 

@@ -1579,8 +1578,8 @@ int cx23885_irq_417(struct cx23885_dev *dev, u32 status)
 		(status & VID_B_MSK_VBI_SYNC)    ||
 		(status & VID_B_MSK_OF)          ||
 		(status & VID_B_MSK_VBI_OF)) {
-		printk(KERN_ERR "%s: V4L mpeg risc op code error, status "
-			"= 0x%x\n", dev->name, status);
+		printk(KERN_ERR "%s: V4L mpeg risc op code error, status = 0x%x\n",
+		       dev->name, status);
 		if (status & VID_B_MSK_BAD_PKT)
 			dprintk(1, "        VID_B_MSK_BAD_PKT\n");
 		if (status & VID_B_MSK_OPC_ERR)

@@ -1995,8 +1994,8 @@ static int cx23885_initdev(struct pci_dev *pci_dev,
 	/* print pci info */
 	dev->pci_rev = pci_dev->revision;
 	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
-	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
-	       "latency: %d, mmio: 0x%llx\n", dev->name,
+	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+	       dev->name,
 	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
 	       dev->pci_lat,
 		(unsigned long long)pci_resource_start(pci_dev, 0));

index 818f3c2fc98d..42413fa423b4 100644
@@ -2482,8 +2482,7 @@ static int dvb_register(struct cx23885_tsport *port)
 		break;
 
 	default:
-		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
-		       " isn't supported yet\n",
+		printk(KERN_INFO "%s: The frontend of your DVB/ATSC card  isn't supported yet\n",
 		       dev->name);
 		break;
 	}

index 33d168ef278d..92ff452e5886 100644
@@ -1065,8 +1065,7 @@ int cx23885_video_irq(struct cx23885_dev *dev, u32 status)
 		}
 
 		if (status & VID_BC_MSK_SYNC)
-			dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) "
-				"video lines miss-match\n",
+			dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) video lines miss-match\n",
 				VID_BC_MSK_SYNC);
 
 		if (status & VID_BC_MSK_OF)

index c1aa888af705..3115cfddab95 100644
@@ -1015,8 +1015,8 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
 			j = 0;
 			break;
 		}
-		v4l2_info(sd, "\tNext carrier edge window:          16 clocks "
-			  "-%1d/+%1d, %u to %u Hz\n", i, j,
+		v4l2_info(sd, "\tNext carrier edge window:	    16 clocks -%1d/+%1d, %u to %u Hz\n",
+			  i, j,
 			  clock_divider_to_freq(rxclk, 16 + j),
 			  clock_divider_to_freq(rxclk, 16 - i));
 	}

@@ -1026,8 +1026,7 @@ static int cx23888_ir_log_status(struct v4l2_subdev *sd)
 	v4l2_info(sd, "\tLow pass filter:                   %s\n",
 		  filtr ? "enabled" : "disabled");
 	if (filtr)
-		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, "
-			  "%u ns\n",
+		v4l2_info(sd, "\tMin acceptable pulse width (LPF):  %u us, %u ns\n",
 			  lpf_count_to_us(filtr),
 			  lpf_count_to_ns(filtr));
 	v4l2_info(sd, "\tPulse width timer timed-out:       %s\n",

index 723f06462104..c2efd14293bf 100644
@@ -120,9 +120,7 @@ MODULE_AUTHOR("Mauro Carvalho Chehab <[email protected]>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(CX88_VERSION);
 
-MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
-			"{{Conexant,23882},"
-			"{{Conexant,23883}");
+MODULE_SUPPORTED_DEVICE("{{Conexant,23881},{{Conexant,23882},{{Conexant,23883}");
 static unsigned int debug;
 module_param(debug,int,0644);
 MODULE_PARM_DESC(debug,"enable debug messages");

@@ -154,8 +152,8 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
 	cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
 	atomic_set(&chip->count, 0);
 
-	dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
-		"byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
+	dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n",
+		buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
 		chip->num_periods, buf->bpl * chip->num_periods);
 
 	/* Enables corresponding bits at AUD_INT_STAT */

@@ -425,8 +423,7 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
 	int err;
 
 	if (!chip) {
-		printk(KERN_ERR "BUG: cx88 can't find device struct."
-				" Can't proceed with open\n");
+		printk(KERN_ERR "BUG: cx88 can't find device struct. Can't proceed with open\n");
 		return -ENODEV;
 	}
 

@@ -914,8 +911,8 @@ static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci,
 	/* print pci info */
 	pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat);
 
-	dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, "
-	       "latency: %d, mmio: 0x%llx\n", core->name, devno,
+	dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+		core->name, devno,
 	       pci_name(pci), pci->revision, pci->irq,
 	       pci_lat, (unsigned long long)pci_resource_start(pci,0));
 

index 8f2556ec3971..31295b36dafc 100644
@@ -2847,8 +2847,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
 		break;
 	}
 
-	info_printk(core, "Leadtek Winfast 2000XP Expert config: "
-		    "tuner=%d, eeprom[0]=0x%02x\n",
+	info_printk(core, "Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
 		    core->board.tuner_type, eeprom_data[0]);
 }
 

@@ -3107,8 +3106,8 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
 		msg.len = (i != 12 ? 5 : 2);
 		err = i2c_transfer(&core->i2c_adap, &msg, 1);
 		if (err != 1) {
-			warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d "
-					  "failed (err = %d)!\n", i, err);
+			warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",
+				    i, err);
 			return;
 		}
 	}

@@ -3284,8 +3283,7 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
 		       "%s: version might help as well.\n",
 		       core->name,core->name,core->name,core->name);
 	}
-	err_printk(core, "Here is a list of valid choices for the card=<n> "
-		   "insmod option:\n");
+	err_printk(core, "Here is a list of valid choices for the card=<n> insmod option:\n");
 	for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
 		printk(KERN_ERR "%s:    card=%d -> %s\n",
 		       core->name, i, cx88_boards[i].name);

@@ -3510,8 +3508,8 @@ static void cx88_card_setup(struct cx88_core *core)
 			for (i = 0; i < ARRAY_SIZE(buffer); i++)
 				if (2 != i2c_master_send(&core->i2c_client,
 							buffer[i],2))
-					warn_printk(core, "Unable to enable "
-						    "tuner(%i).\n", i);
+					warn_printk(core, "Unable to enable tuner(%i).\n",
+						    i);
 		}
 		break;
 	case CX88_BOARD_MSI_TVANYWHERE_MASTER:

index a9907265ff66..7fafd132ccaf 100644
@@ -186,8 +186,8 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
 	dual    = freq_magnitude(x, N, dual_freq);
 	noise   = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
 
-	dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, "
-		   "noise=%d\n", carrier, stereo, dual, noise);
+	dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, noise=%d\n",
+		carrier, stereo, dual, noise);
 
 	if (stereo > dual)
 		ret = V4L2_TUNER_SUB_STEREO;

@@ -222,8 +222,8 @@ static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
 	s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
 	s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
 	s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
-	dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d"
-		   "\n", dual_ref, dual, sap_ref, sap);
+	dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d\n",
+		dual_ref, dual, sap_ref, sap);
 	/* FIXME: Currently not supported */
 	return UNSET;
 }

@@ -241,8 +241,8 @@ static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
 	u32 current_address = cx_read(srch->ptr1_reg);
 	u32 offset = (current_address - srch->fifo_start + bpl);
 
-	dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), "
-		"sample_count=%d, aud_intstat=%08x\n", current_address,
+	dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), sample_count=%d, aud_intstat=%08x\n",
+		current_address,
 		current_address - srch->fifo_start, sample_count,
 		cx_read(MO_AUD_INTSTAT));
 

index ac2392d8887a..fe5fd2a4650b 100644
@@ -625,8 +625,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 		return -EINVAL;
 
 	if (!fe0->dvb.frontend) {
-		printk(KERN_ERR "%s/2: dvb frontend not attached. "
-				"Can't attach xc3028\n",
+		printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc3028\n",
 		       dev->core->name);
 		return -EINVAL;
 	}

@@ -665,8 +664,7 @@ static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
 		return -EINVAL;
 
 	if (!fe0->dvb.frontend) {
-		printk(KERN_ERR "%s/2: dvb frontend not attached. "
-				"Can't attach xc4000\n",
+		printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc4000\n",
 		       dev->core->name);
 		return -EINVAL;
 	}

index cf2d69615838..8ee9b9802683 100644
@@ -45,8 +45,7 @@ MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
 
 static unsigned int i2c_udelay = 5;
 module_param(i2c_udelay, int, 0644);
-MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs "
-		"(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
 
 #define dprintk(level,fmt, arg...)	if (i2c_debug >= level) \
 	printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)

index 245357adbc25..86b46b62d985 100644
@@ -401,8 +401,8 @@ static int cx8802_init_common(struct cx8802_dev *dev)
 
 	dev->pci_rev = dev->pci->revision;
 	pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER,  &dev->pci_lat);
-	printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, "
-	       "latency: %d, mmio: 0x%llx\n", dev->core->name,
+	printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+	       dev->core->name,
 	       pci_name(dev->pci), dev->pci_rev, dev->pci->irq,
 	       dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0));
 

@@ -690,8 +690,8 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
 				list_del(&d->drvlist);
 				kfree(d);
 			} else
-				printk(KERN_ERR "%s/2: cx8802 driver remove "
-				       "failed (%d)\n", dev->core->name, err);
+				printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
+				       dev->core->name, err);
 		}
 
 		mutex_unlock(&dev->core->lock);

@@ -768,8 +768,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
 		struct cx8802_driver *drv, *tmp;
 		int err;
 
-		printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver "
-		       "while cx8802 sub-drivers still loaded?!\n",
+		printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n",
 		       dev->core->name);
 
 		list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) {

@@ -777,8 +776,8 @@ static void cx8802_remove(struct pci_dev *pci_dev)
 			if (err == 0) {
 				list_del(&drv->drvlist);
 			} else
-				printk(KERN_ERR "%s/2: cx8802 driver remove "
-				       "failed (%d)\n", dev->core->name, err);
+				printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
+				       dev->core->name, err);
 			kfree(drv);
 		}
 	}

index 6bbce6ad6295..dd8e6f324204 100644
@@ -62,8 +62,7 @@ MODULE_PARM_DESC(always_analog,"force analog audio out");
 
 static unsigned int radio_deemphasis;
 module_param(radio_deemphasis,int,0644);
-MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
-		 "0=None, 1=50us (elsewhere), 2=75us (USA)");
+MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)");
 
 #define dprintk(fmt, arg...)	if (audio_debug) \
 	printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)

@@ -976,8 +975,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 	}
 
 	if (UNSET != ctl) {
-		dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
-			"[status=0x%x,ctl=0x%x,vol=0x%x]\n",
+		dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x [status=0x%x,ctl=0x%x,vol=0x%x]\n",
 			mask, ctl, cx_read(AUD_STATUS),
 			cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
 		cx_andor(AUD_CTL, mask, ctl);

index d83eb3b10f54..418e2db40b39 100644
@@ -1307,8 +1307,8 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 	/* print pci info */
 	dev->pci_rev = pci_dev->revision;
 	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
-	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
-	       "latency: %d, mmio: 0x%llx\n", core->name,
+	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+	       core->name,
 	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
 	       dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
 

index 18e3a4deee64..a6c9fe235974 100644
@@ -824,8 +824,7 @@ static int dvb_input_attach(struct ddb_input *input)
 				   &input->port->dev->pdev->dev,
 				   adapter_nr);
 	if (ret < 0) {
-		printk(KERN_ERR "ddbridge: Could not register adapter."
-		       "Check if you enabled enough adapters in dvb-core!\n");
+		printk(KERN_ERR "ddbridge: Could not register adapter.Check if you enabled enough adapters in dvb-core!\n");
 		return ret;
 	}
 	input->attached = 1;

@@ -1730,8 +1729,7 @@ static __init int module_init_ddbridge(void)
 {
 	int ret;
 
-	printk(KERN_INFO "Digital Devices PCIE bridge driver, "
-	       "Copyright (C) 2010-11 Digital Devices GmbH\n");
+	printk(KERN_INFO "Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH\n");
 
 	ret = ddb_class_create();
 	if (ret < 0)

index 5dd504741b12..a589aa78d1d9 100644
@@ -315,8 +315,7 @@ static void dm1105_card_list(struct pci_dev *pci)
 			"dm1105: Updating to the latest version might help\n"
 			"dm1105: as well.\n");
 	}
-	printk(KERN_ERR "Here is a list of valid choices for the card=<n> "
-		   "insmod option:\n");
+	printk(KERN_ERR "Here is a list of valid choices for the card=<n> insmod option:\n");
 	for (i = 0; i < ARRAY_SIZE(dm1105_boards); i++)
 		printk(KERN_ERR "dm1105:    card=%d -> %s\n",
 				i, dm1105_boards[i].name);

index 8a86b61a896d..374f45f81ab3 100644
@@ -177,8 +177,8 @@ static int snd_ivtv_init(struct v4l2_device *v4l2_dev)
 #if 0
 	ret = snd_ivtv_mixer_create(itvsc);
 	if (ret) {
-		IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d:"
-			       " proceeding anyway\n", __func__, ret);
+		IVTV_ALSA_WARN("%s: snd_ivtv_mixer_create() failed with err %d: proceeding anyway\n",
+			       __func__, ret);
 	}
 #endif
 

@@ -235,8 +235,8 @@ static int ivtv_alsa_load(struct ivtv *itv)
 
 	s = &itv->streams[IVTV_ENC_STREAM_TYPE_PCM];
 	if (s->vdev.v4l2_dev == NULL) {
-		IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - "
-				     "skipping\n", __func__);
+		IVTV_DEBUG_ALSA_INFO("%s: PCM stream for card is disabled - skipping\n",
+				     __func__);
 		return 0;
 	}
 

@@ -250,8 +250,8 @@ static int ivtv_alsa_load(struct ivtv *itv)
 		IVTV_ALSA_ERR("%s: failed to create struct snd_ivtv_card\n",
 			      __func__);
 	} else {
-		IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance "
-				     "\n", __func__);
+		IVTV_DEBUG_ALSA_INFO("%s: created ivtv ALSA interface instance \n",
+				     __func__);
 	}
 	return 0;
 }

index 374033a5bdaf..15ac3af3c488 100644
@@ -885,8 +885,8 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev,
 	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
 
 	if (pci_latency < 64 && ivtv_pci_latency) {
-		IVTV_INFO("Unreasonably low latency timer, "
-			       "setting to 64 (was %d)\n", pci_latency);
+		IVTV_INFO("Unreasonably low latency timer, setting to 64 (was %d)\n",
+			  pci_latency);
 		pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
 		pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
 	}

@@ -896,8 +896,7 @@ static int ivtv_setup_pci(struct ivtv *itv, struct pci_dev *pdev,
 	   these problems. */
 	pci_write_config_dword(pdev, 0x40, 0xffff);
 
-	IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
-		   "irq: %d, latency: %d, memory: 0x%llx\n",
+	IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, irq: %d, latency: %d, memory: 0x%llx\n",
 		   pdev->device, pdev->revision, pdev->bus->number,
 		   PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
 		   pdev->irq, pci_latency, (u64)itv->base_addr);

@@ -1047,13 +1046,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
 				       IVTV_ENCODER_SIZE);
 	if (!itv->enc_mem) {
-		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
-			 "encoder memory\n");
-		IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
-			 "vmalloc address space for this window\n");
+		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 encoder memory\n");
+		IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of vmalloc address space for this window\n");
 		IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
-		IVTV_ERR("Use the vmalloc= kernel command line option to set "
-			 "VmallocTotal to a larger value\n");
+		IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_mem;
 	}

@@ -1064,14 +1060,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 		itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
 				IVTV_DECODER_SIZE);
 		if (!itv->dec_mem) {
-			IVTV_ERR("ioremap failed. Can't get a window into "
-				 "CX23415 decoder memory\n");
-			IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
-				 "of vmalloc address space for this window\n");
-			IVTV_ERR("Check the output of 'grep Vmalloc "
-				 "/proc/meminfo'\n");
-			IVTV_ERR("Use the vmalloc= kernel command line option "
-				 "to set VmallocTotal to a larger value\n");
+			IVTV_ERR("ioremap failed. Can't get a window into CX23415 decoder memory\n");
+			IVTV_ERR("Each capture card with a CX23415 needs 8 MB of vmalloc address space for this window\n");
+			IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+			IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
 			retval = -ENOMEM;
 			goto free_mem;
 		}

@@ -1086,13 +1078,10 @@ static int ivtv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	itv->reg_mem =
 	    ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
 	if (!itv->reg_mem) {
-		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
-			 "register space\n");
-		IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
-			 "vmalloc address space for this window\n");
+		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 register space\n");
+		IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of vmalloc address space for this window\n");
 		IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
-		IVTV_ERR("Use the vmalloc= kernel command line option to set "
-			 "VmallocTotal to a larger value\n");
+		IVTV_ERR("Use the vmalloc= kernel command line option to set VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_io;
 	}

index 5b3095f65dce..ba279fdb3df8 100644
@@ -376,8 +376,8 @@ int ivtv_firmware_check(struct ivtv *itv, char *where)
 	/* If something failed & currently idle, try to reload */
 	if (res && !atomic_read(&itv->capturing) &&
 						!atomic_read(&itv->decoding)) {
-		IVTV_INFO("Detected in %s that firmware had failed - "
-			  "Reloading\n", where);
+		IVTV_INFO("Detected in %s that firmware had failed - Reloading\n",
+			  where);
 		res = ivtv_firmware_restart(itv);
 		/*
 		 * Even if restarted ok, still signal a problem had occurred.

index b094054cda6e..a61f63234e1f 100644
@@ -88,8 +88,8 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
 
 		if (y_pages == y_dma.page_count) {
 			IVTV_DEBUG_WARN
-				("failed to map uv user pages, returned %d "
-				 "expecting %d\n", uv_pages, uv_dma.page_count);
+				("failed to map uv user pages, returned %d expecting %d\n",
+				 uv_pages, uv_dma.page_count);
 
 			if (uv_pages >= 0) {
 				for (i = 0; i < uv_pages; i++)

@@ -100,8 +100,8 @@ static int ivtv_yuv_prep_user_dma(struct ivtv *itv, struct ivtv_user_dma *dma,
 			}
 		} else {
 			IVTV_DEBUG_WARN
-				("failed to map y user pages, returned %d "
-				 "expecting %d\n", y_pages, y_dma.page_count);
+				("failed to map y user pages, returned %d expecting %d\n",
+				 y_pages, y_dma.page_count);
 		}
 		if (y_pages >= 0) {
 			for (i = 0; i < y_pages; i++)

index 8b95eefb610b..612a8402cf4d 100644
@@ -293,8 +293,7 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
 	/* Map User DMA */
 	if (ivtv_udma_setup(itv, ivtv_dest_addr, userbuf, size_in_bytes) <= 0) {
 		mutex_unlock(&itv->udma.lock);
-		IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, "
-			       "Error with get_user_pages: %d bytes, %d pages returned\n",
+		IVTVFB_WARN("ivtvfb_prep_dec_dma_to_device, Error with get_user_pages: %d bytes, %d pages returned\n",
 			       size_in_bytes, itv->udma.page_count);
 
 		/* get_user_pages must have failed completely */

index ba887e8e1b17..11d81389ab1e 100644
@@ -60,8 +60,7 @@ MODULE_PARM_DESC(gbuffers, "number of capture buffers, default is 2 (32 max)");
 /* size of a grab buffer */
 static unsigned int gbufsize = MEYE_MAX_BUFSIZE;
 module_param(gbufsize, int, 0444);
-MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400"
-		 " (will be rounded up to a page multiple)");
+MODULE_PARM_DESC(gbufsize, "size of the capture buffers, default is 614400 (will be rounded up to a page multiple)");
 
 /* /dev/videoX registration number */
 static int video_nr = -1;

@@ -1261,8 +1260,7 @@ static int vidioc_reqbufs(struct file *file, void *fh,
 	meye.grab_fbuffer = rvmalloc(gbuffers * gbufsize);
 
 	if (!meye.grab_fbuffer) {
-		printk(KERN_ERR "meye: v4l framebuffer allocation"
-				" failed\n");
+		printk(KERN_ERR "meye: v4l framebuffer allocation failed\n");
 		mutex_unlock(&meye.lock);
 		return -ENOMEM;
 	}

@@ -1659,8 +1657,7 @@ static int meye_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
 	ret = -EIO;
 	if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
 		v4l2_err(v4l2_dev, "meye: unable to power on the camera\n");
-		v4l2_err(v4l2_dev, "meye: did you enable the camera in "
-				"sonypi using the module options ?\n");
+		v4l2_err(v4l2_dev, "meye: did you enable the camera in sonypi using the module options ?\n");
 		goto outsonypienable;
 	}
 

@@ -1834,8 +1831,7 @@ static int __init meye_init(void)
 	if (gbufsize > MEYE_MAX_BUFSIZE)
 		gbufsize = MEYE_MAX_BUFSIZE;
 	gbufsize = PAGE_ALIGN(gbufsize);
-	printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) "
-			 "for capture\n",
+	printk(KERN_INFO "meye: using %d buffers with %dk (%dk total) for capture\n",
 			 gbuffers,
 			 gbufsize / 1024, gbuffers * gbufsize / 1024);
 	return pci_register_driver(&meye_driver);

index e7e4428109c3..d5ee82aee9e8 100644
@@ -282,13 +282,12 @@ static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page)
 			continue;
 
 		if (upacket >> 24 & 1)
-			printk_ratelimited(KERN_INFO "earth-pt1: device "
-				"buffer overflowing. table[%d] buf[%d]\n",
+			printk_ratelimited(KERN_INFO "earth-pt1: device buffer overflowing. table[%d] buf[%d]\n",
 				pt1->table_index, pt1->buf_index);
 		sc = upacket >> 26 & 0x7;
 		if (adap->st_count != -1 && sc != ((adap->st_count + 1) & 0x7))
-			printk_ratelimited(KERN_INFO "earth-pt1: data loss"
-				" in streamID(adapter)[%d]\n", index);
+			printk_ratelimited(KERN_INFO "earth-pt1: data loss in streamID(adapter)[%d]\n",
+					   index);
 		adap->st_count = sc;
 
 		buf = adap->buf;

index dc0e2fc5f68b..8a35ecfb75e3 100644
@@ -813,8 +813,7 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream)
 	int amux, err;
 
 	if (!saa7134) {
-		pr_err("BUG: saa7134 can't find device struct."
-				" Can't proceed with open\n");
+		pr_err("BUG: saa7134 can't find device struct. Can't proceed with open\n");
 		return -ENODEV;
 	}
 	dev = saa7134->dev;

index c480a7e87593..2b60af493de4 100644
@@ -7341,8 +7341,8 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
 	case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
 		break;
 	default:
-		pr_warn("%s: warning: "
-		       "unknown hauppauge model #%d\n", dev->name, tv.model);
+		pr_warn("%s: warning: unknown hauppauge model #%d\n",
+			dev->name, tv.model);
 		break;
 	}
 

@@ -7920,8 +7920,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		msg.addr = 0x0b;
 		msg.len = 1;
 		if (1 != i2c_transfer(&dev->i2c_adap, &msg, 1)) {
-			pr_warn("%s: send wake up byte to pic16C505"
-					"(IR chip) failed\n", dev->name);
+			pr_warn("%s: send wake up byte to pic16C505(IR chip) failed\n",
+				dev->name);
 		} else {
 			msg.flags = I2C_M_RD;
 			rc = i2c_transfer(&dev->i2c_adap, &msg, 1);

index ffb66a9ae23e..133389ea218d 100644
@@ -66,8 +66,7 @@ MODULE_PARM_DESC(latency,"pci latency timer");
 
 int saa7134_no_overlay=-1;
 module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
-MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
-		" [some VIA/SIS chipsets are known to have problem with overlay]");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 
 bool saa7134_userptr;
 module_param(saa7134_userptr, bool, 0644);

@@ -619,25 +618,25 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
 		print_irqstatus(dev,loop,report,status);
 		if (report & SAA7134_IRQ_REPORT_PE) {
 			/* disable all parity error */
-			pr_warn("%s/irq: looping -- "
-			       "clearing PE (parity error!) enable bit\n",dev->name);
+			pr_warn("%s/irq: looping -- clearing PE (parity error!) enable bit\n",
+				dev->name);
 			saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
 		} else if (report & SAA7134_IRQ_REPORT_GPIO16) {
 			/* disable gpio16 IRQ */
-			pr_warn("%s/irq: looping -- "
-			       "clearing GPIO16 enable bit\n",dev->name);
+			pr_warn("%s/irq: looping -- clearing GPIO16 enable bit\n",
+				dev->name);
 			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
 			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
 		} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
 			/* disable gpio18 IRQs */
-			pr_warn("%s/irq: looping -- "
-			       "clearing GPIO18 enable bit\n",dev->name);
+			pr_warn("%s/irq: looping -- clearing GPIO18 enable bit\n",
+				dev->name);
 			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
 			saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
 		} else {
 			/* disable all irqs */
-			pr_warn("%s/irq: looping -- "
-			       "clearing all enable bits\n",dev->name);
+			pr_warn("%s/irq: looping -- clearing all enable bits\n",
+				dev->name);
 			saa_writel(SAA7134_IRQ1,0);
 			saa_writel(SAA7134_IRQ2,0);
 		}

@@ -1081,18 +1080,14 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
 		}
 #endif
 		if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
-			pr_info("%s: quirk: this driver and your "
-					"chipset may not work together"
-					" in overlay mode.\n",dev->name);
+			pr_info("%s: quirk: this driver and your chipset may not work together in overlay mode.\n",
+				dev->name);
 			if (!saa7134_no_overlay) {
-				pr_info("%s: quirk: overlay "
-						"mode will be disabled.\n",
+				pr_info("%s: quirk: overlay mode will be disabled.\n",
 						dev->name);
 				saa7134_no_overlay = 1;
 			} else {
-				pr_info("%s: quirk: overlay "
-						"mode will be forced. Use this"
-						" option at your own risk.\n",
+				pr_info("%s: quirk: overlay mode will be forced. Use this option at your own risk.\n",
 						dev->name);
 			}
 		}

@@ -1106,10 +1101,10 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
 	/* print pci info */
 	dev->pci_rev = pci_dev->revision;
 	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
-	pr_info("%s: found at %s, rev: %d, irq: %d, "
-	       "latency: %d, mmio: 0x%llx\n", dev->name,
-	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
-	       dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
+	pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+		dev->name,
+	        pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+	        dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
 	pci_set_master(pci_dev);
 	err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
 	if (err) {

index 59a4b5f7724e..598b8bbfe726 100644
@@ -1449,8 +1449,8 @@ static int dvb_init(struct saa7134_dev *dev)
 
 				if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
 						0x60, &dev->i2c_adap, 0) == NULL) {
-					pr_warn("%s: Medion Quadro, no tda826x "
-						"found !\n", __func__);
+					pr_warn("%s: Medion Quadro, no tda826x found !\n",
+						__func__);
 					goto detach_frontend;
 				}
 				if (dev_id != 0x08) {

@@ -1458,8 +1458,8 @@ static int dvb_init(struct saa7134_dev *dev)
 					fe->ops.i2c_gate_ctrl(fe, 1);
 					if (dvb_attach(isl6405_attach, fe,
 							&dev->i2c_adap, 0x08, 0, 0) == NULL) {
-						pr_warn("%s: Medion Quadro, no ISL6405 "
-							"found !\n", __func__);
+						pr_warn("%s: Medion Quadro, no ISL6405 found !\n",
+							__func__);
 						goto detach_frontend;
 					}
 					if (dev_id == 0x07) {

@@ -1629,8 +1629,8 @@ static int dvb_init(struct saa7134_dev *dev)
 			struct dvb_frontend *fe;
 			if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
 				  &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
-				pr_warn("%s: MD7134 DVB-S, no SD1878 "
-					"found !\n", __func__);
+				pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n",
+					__func__);
 				goto detach_frontend;
 			}
 			/* we need to open the i2c gate (we know it exists) */

@@ -1638,8 +1638,8 @@ static int dvb_init(struct saa7134_dev *dev)
 			fe->ops.i2c_gate_ctrl(fe, 1);
 			if (dvb_attach(isl6405_attach, fe,
 					&dev->i2c_adap, 0x08, 0, 0) == NULL) {
-				pr_warn("%s: MD7134 DVB-S, no ISL6405 "
-					"found !\n", __func__);
+				pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n",
+					__func__);
 				goto detach_frontend;
 			}
 			fe->ops.i2c_gate_ctrl(fe, 0);

@@ -1670,14 +1670,14 @@ static int dvb_init(struct saa7134_dev *dev)
 				if (dvb_attach(tda826x_attach,
 						fe0->dvb.frontend, 0x60,
 						&dev->i2c_adap, 0) == NULL) {
-					pr_warn("%s: Asus Tiger 3in1, no "
-						"tda826x found!\n", __func__);
+					pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n",
+						__func__);
 					goto detach_frontend;
 				}
 				if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
 						&dev->i2c_adap, 0, 0) == NULL) {
-					pr_warn("%s: Asus Tiger 3in1, no lnbp21"
-						" found!\n", __func__);
+					pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n",
+						__func__);
 					goto detach_frontend;
 			       }
 		       }

@@ -1695,14 +1695,14 @@ static int dvb_init(struct saa7134_dev *dev)
 				if (dvb_attach(tda826x_attach,
 					       fe0->dvb.frontend, 0x60,
 					       &dev->i2c_adap, 0) == NULL) {
-					pr_warn("%s: Asus My Cinema PS3-100, no "
-						"tda826x found!\n", __func__);
+					pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n",
+						__func__);
 					goto detach_frontend;
 				}
 				if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
 					       &dev->i2c_adap, 0, 0) == NULL) {
-					pr_warn("%s: Asus My Cinema PS3-100, no lnbp21"
-						" found!\n", __func__);
+					pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n",
+						__func__);
 					goto detach_frontend;
 				}
 			}

index eff52bbbfd66..823b75ed47e1 100644
@@ -123,8 +123,7 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol,
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 
 	if (dev == NULL) {
-		ir_dbg(ir, "get_key_flydvb_trio: "
-			   "ir->c->adapter->algo_data is NULL!\n");
+		ir_dbg(ir, "get_key_flydvb_trio: ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 

@@ -150,8 +149,8 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol,
 			msleep(10);
 			continue;
 		}
-		ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)"
-			   "failed %dx\n", attempt);
+		ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)failed %dx\n",
+		       attempt);
 		return -EIO;
 	}
 	if (1 != i2c_master_recv(ir->c, &b, 1)) {

@@ -174,8 +173,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, enum rc_type *protocol
 	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 	if (dev == NULL) {
-		ir_dbg(ir, "get_key_msi_tvanywhere_plus: "
-			   "ir->c->adapter->algo_data is NULL!\n");
+		ir_dbg(ir, "get_key_msi_tvanywhere_plus: ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 

@@ -223,8 +221,7 @@ static int get_key_kworld_pc150u(struct IR_i2c *ir, enum rc_type *protocol,
 	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
 	struct saa7134_dev *dev = ir->c->adapter->algo_data;
 	if (dev == NULL) {
-		ir_dbg(ir, "get_key_kworld_pc150u: "
-			   "ir->c->adapter->algo_data is NULL!\n");
+		ir_dbg(ir, "get_key_kworld_pc150u: ir->c->adapter->algo_data is NULL!\n");
 		return -EIO;
 	}
 

index f30758e24f5d..62c34504199d 100644
@@ -218,8 +218,7 @@ int saa7164_buffer_activate(struct saa7164_buffer *buf, int i)
 	saa7164_writel(port->bufptr32h + ((sizeof(u32) * 2) * i), buf->pt_dma);
 	saa7164_writel(port->bufptr32l + ((sizeof(u32) * 2) * i), 0);
 
-	dprintk(DBGLVL_BUF, "   buf[%d] offset 0x%llx (0x%x) "
-		"buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
+	dprintk(DBGLVL_BUF, "	buf[%d] offset 0x%llx (0x%x) buf 0x%llx/%llx (0x%x/%x) nr=%d\n",
 		buf->idx,
 		(u64)port->bufoffset + (i * sizeof(u32)),
 		saa7164_readl(port->bufoffset + (sizeof(u32) * i)),

index a18fe5d47238..e305c02f9dc9 100644
@@ -427,8 +427,8 @@ int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
 		write_distance = curr_gwp + bus->m_dwSizeGetRing - curr_grp;
 
 	if (bytes_to_read > write_distance) {
-		printk(KERN_ERR "%s() Invalid bus state, missing msg "
-			"or mangled ring, faulty H/W / bad code?\n", __func__);
+		printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n",
+		       __func__);
 		ret = SAA_ERR_INVALID_COMMAND;
 		goto out;
 	}

index c2b738227f58..15a98c638c55 100644
@@ -726,8 +726,8 @@ void saa7164_card_list(struct saa7164_dev *dev)
 			dev->name, dev->name, dev->name, dev->name);
 	}
 
-	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod "
-		"option:\n", dev->name);
+	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n",
+	       dev->name);
 
 	for (i = 0; i < saa7164_bcount; i++)
 		printk(KERN_ERR "%s:    card=%d -> %s\n",

index 3285c37b4583..45951b3cc251 100644
@@ -301,8 +301,8 @@ static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 			else
 				saa7164_cmd_timeout_seqno(dev, seqno);
 
-			dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d "
-				"(signalled=%d)\n", __func__, seqno, r,
+			dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d (signalled=%d)\n",
+				__func__, seqno, r,
 				dev->cmds[seqno].signalled);
 		} else
 			ret = SAA_OK;

@@ -353,8 +353,8 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
 	int ret;
 	int safety = 0;
 
-	dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, "
-		"sel = 0x%x)\n", __func__, saa7164_unitid_name(dev, id), id,
+	dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, sel = 0x%x)\n",
+		__func__, saa7164_unitid_name(dev, id), id,
 		command, controlselector);
 
 	if ((size == 0) || (buf == NULL)) {

@@ -452,9 +452,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
 		if (presponse_t->seqno != pcommand_t->seqno) {
 
 			dprintk(DBGLVL_CMD,
-				"wrong event: seqno = %d, "
-				"expected seqno = %d, "
-				"will dequeue regardless\n",
+				"wrong event: seqno = %d, expected seqno = %d, will dequeue regardless\n",
 				presponse_t->seqno, pcommand_t->seqno);
 
 			ret = saa7164_cmd_dequeue(dev);

166 lines not on this page · raw message

index e9a783b71b45..cd3eeda5250b 100644
@@ -244,8 +244,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
 		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
-			printk(KERN_ERR "%s() acquire/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 		ret = -EIO;
 		goto out;

@@ -261,8 +261,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
 		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
-			printk(KERN_ERR "%s() pause/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 
 		ret = -EIO;

@@ -279,8 +279,8 @@ static int saa7164_dvb_start_port(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
 		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
-			printk(KERN_ERR "%s() run/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 
 		ret = -EIO;

@@ -357,8 +357,7 @@ static int dvb_register(struct saa7164_port *port)
 	/* Sanity check that the PCI configuration space is active */
 	if (port->hwcfg.BARLocation == 0) {
 		result = -ENOMEM;
-		printk(KERN_ERR "%s: dvb_register_adapter failed "
-		       "(errno = %d), NO PCI configuration\n",
+		printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n",
 			DRIVER_NAME, result);
 		goto fail_adapter;
 	}

@@ -386,8 +385,7 @@ static int dvb_register(struct saa7164_port *port)
 
 		if (!buf) {
 			result = -ENOMEM;
-			printk(KERN_ERR "%s: dvb_register_adapter failed "
-			       "(errno = %d), unable to allocate buffers\n",
+			printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n",
 				DRIVER_NAME, result);
 			goto fail_adapter;
 		}

@@ -401,8 +399,8 @@ static int dvb_register(struct saa7164_port *port)
 	result = dvb_register_adapter(&dvb->adapter, DRIVER_NAME, THIS_MODULE,
 			&dev->pci->dev, adapter_nr);
 	if (result < 0) {
-		printk(KERN_ERR "%s: dvb_register_adapter failed "
-		       "(errno = %d)\n", DRIVER_NAME, result);
+		printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n",
+		       DRIVER_NAME, result);
 		goto fail_adapter;
 	}
 	dvb->adapter.priv = port;

@@ -410,8 +408,8 @@ static int dvb_register(struct saa7164_port *port)
 	/* register frontend */
 	result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
 	if (result < 0) {
-		printk(KERN_ERR "%s: dvb_register_frontend failed "
-		       "(errno = %d)\n", DRIVER_NAME, result);
+		printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n",
+		       DRIVER_NAME, result);
 		goto fail_frontend;
 	}
 

@@ -444,16 +442,16 @@ static int dvb_register(struct saa7164_port *port)
 	dvb->fe_hw.source = DMX_FRONTEND_0;
 	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
 	if (result < 0) {
-		printk(KERN_ERR "%s: add_frontend failed "
-		       "(DMX_FRONTEND_0, errno = %d)\n", DRIVER_NAME, result);
+		printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
+		       DRIVER_NAME, result);
 		goto fail_fe_hw;
 	}
 
 	dvb->fe_mem.source = DMX_MEMORY_FE;
 	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
 	if (result < 0) {
-		printk(KERN_ERR "%s: add_frontend failed "
-		       "(DMX_MEMORY_FE, errno = %d)\n", DRIVER_NAME, result);
+		printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
+		       DRIVER_NAME, result);
 		goto fail_fe_mem;
 	}
 

index 32a353d162e7..68124ce7ebc3 100644
@@ -157,8 +157,7 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
 			params->pitch);
 
 		if (!buf) {
-			printk(KERN_ERR "%s() failed "
-			       "(errno = %d), unable to allocate buffer\n",
+			printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
 				__func__, result);
 			result = -ENOMEM;
 			goto failed;

@@ -681,8 +680,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
 		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
-			printk(KERN_ERR "%s() acquire/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 		ret = -EIO;
 		goto out;

@@ -698,8 +697,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
 		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
-			printk(KERN_ERR "%s() pause/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 
 		ret = -EIO;

@@ -716,8 +715,8 @@ static int saa7164_encoder_start_streaming(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_api_transition_port(port, SAA_DMASTATE_STOP);
 		if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) {
-			printk(KERN_ERR "%s() run/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 
 		ret = -EIO;

@@ -1026,8 +1025,7 @@ int saa7164_encoder_register(struct saa7164_port *port)
 
 	/* Sanity check that the PCI configuration space is active */
 	if (port->hwcfg.BARLocation == 0) {
-		printk(KERN_ERR "%s() failed "
-		       "(errno = %d), NO PCI configuration\n",
+		printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
 			__func__, result);
 		result = -ENOMEM;
 		goto failed;

index 269e0782c7b6..8568adfd7ece 100644
@@ -421,8 +421,8 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 
 		ret = request_firmware(&fw, fwname, &dev->pci->dev);
 		if (ret) {
-			printk(KERN_ERR "%s() Upload failed. "
-				"(file not found?)\n", __func__);
+			printk(KERN_ERR "%s() Upload failed. (file not found?)\n",
+			       __func__);
 			return -ENOMEM;
 		}
 

@@ -478,15 +478,13 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 				0x03) && (saa7164_readl(SAA_DATAREADY_FLAG_ACK)
 				== 0x00) && (version == 0x00)) {
 
-				dprintk(DBGLVL_FW, "BootLoader version in  "
-					"rom %d.%d.%d.%d\n",
+				dprintk(DBGLVL_FW, "BootLoader version in  rom %d.%d.%d.%d\n",
 					(bootloaderversion & 0x0000fc00) >> 10,
 					(bootloaderversion & 0x000003e0) >> 5,
 					(bootloaderversion & 0x0000001f),
 					(bootloaderversion & 0xffff0000) >> 16
 					);
-				dprintk(DBGLVL_FW, "BootLoader version "
-					"in file %d.%d.%d.%d\n",
+				dprintk(DBGLVL_FW, "BootLoader version in file %d.%d.%d.%d\n",
 					(boothdr->version & 0x0000fc00) >> 10,
 					(boothdr->version & 0x000003e0) >> 5,
 					(boothdr->version & 0x0000001f),

index ee54491459a6..e5dcb81029d3 100644
@@ -110,8 +110,7 @@ static int saa7164_vbi_buffers_alloc(struct saa7164_port *port)
 			params->pitch);
 
 		if (!buf) {
-			printk(KERN_ERR "%s() failed "
-			       "(errno = %d), unable to allocate buffer\n",
+			printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
 				__func__, result);
 			result = -ENOMEM;
 			goto failed;

@@ -384,8 +383,8 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
 		/* Stop the hardware, regardless */
 		result = saa7164_vbi_stop_port(port);
 		if (result != SAA_OK) {
-			printk(KERN_ERR "%s() pause/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 
 		ret = -EIO;

@@ -403,8 +402,8 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
 		result = saa7164_vbi_acquire_port(port);
 		result = saa7164_vbi_stop_port(port);
 		if (result != SAA_OK) {
-			printk(KERN_ERR "%s() run/forced stop transition "
-				"failed, res = 0x%x\n", __func__, result);
+			printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
+			       __func__, result);
 		}
 
 		ret = -EIO;

@@ -728,8 +727,7 @@ int saa7164_vbi_register(struct saa7164_port *port)
 
 	/* Sanity check that the PCI configuration space is active */
 	if (port->hwcfg.BARLocation == 0) {
-		printk(KERN_ERR "%s() failed "
-		       "(errno = %d), NO PCI configuration\n",
+		printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
 			__func__, result);
 		result = -ENOMEM;
 		goto failed;

index b4be47969b6b..896bec6627aa 100644
@@ -702,8 +702,8 @@ int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr)
 	snprintf(solo_dev->vfd->name, sizeof(solo_dev->vfd->name), "%s (%i)",
 		 SOLO6X10_NAME, solo_dev->vfd->num);
 
-	dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with "
-		 "%d inputs (%d extended)\n", solo_dev->vfd->num,
+	dev_info(&solo_dev->pdev->dev, "Display as /dev/video%d with %d inputs (%d extended)\n",
+		 solo_dev->vfd->num,
 		 solo_dev->nr_chans, solo_dev->nr_ext);
 
 	return 0;

index 382caf200ba1..de84aa1b41f1 100644
@@ -100,8 +100,7 @@ MODULE_PARM_DESC(adac,"audio DAC type: 0 TI, 1 CRYSTAL, 2 MSP (use if autodetect
 module_param(hw_sections, int, 0444);
 MODULE_PARM_DESC(hw_sections, "0 use software section filter, 1 use hardware");
 module_param(rgb_on, int, 0444);
-MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control"
-		" signal on SCART pin 16 to switch SCART video mode from CVBS to RGB");
+MODULE_PARM_DESC(rgb_on, "For Siemens DVB-C cards only: Enable RGB control signal on SCART pin 16 to switch SCART video mode from CVBS to RGB");
 module_param(volume, int, 0444);
 MODULE_PARM_DESC(volume, "initial volume: default 255 (range 0-255)");
 module_param(budgetpatch, int, 0444);

@@ -833,8 +832,7 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter)
 
 	ret = av7110_fw_request(av7110, buf, 20, &handle, 1);
 	if (ret != 0 || handle >= 32) {
-		printk("dvb-ttpci: %s error  buf %04x %04x %04x %04x  "
-				"ret %d  handle %04x\n",
+		printk("dvb-ttpci: %s error  buf %04x %04x %04x %04x  ret %d  handle %04x\n",
 				__func__, buf[0], buf[1], buf[2], buf[3],
 				ret, handle);
 		dvbdmxfilter->hw_handle = 0xffff;

@@ -876,8 +874,7 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter)
 	buf[2] = handle;
 	ret = av7110_fw_request(av7110, buf, 3, answ, 2);
 	if (ret != 0 || answ[1] != handle) {
-		printk("dvb-ttpci: %s error  cmd %04x %04x %04x  ret %x  "
-				"resp %04x %04x  pid %d\n",
+		printk("dvb-ttpci: %s error  cmd %04x %04x %04x  ret %x  resp %04x %04x  pid %d\n",
 				__func__, buf[0], buf[1], buf[2], ret,
 				answ[0], answ[1], dvbdmxfilter->feed->pid);
 		if (!ret)

@@ -1532,15 +1529,12 @@ static int get_firmware(struct av7110* av7110)
 	ret = request_firmware(&fw, "dvb-ttpci-01.fw", &av7110->dev->pci->dev);
 	if (ret) {
 		if (ret == -ENOENT) {
-			printk(KERN_ERR "dvb-ttpci: could not load firmware,"
-			       " file not found: dvb-ttpci-01.fw\n");
-			printk(KERN_ERR "dvb-ttpci: usually this should be in "
-			       "/usr/lib/hotplug/firmware or /lib/firmware\n");
-			printk(KERN_ERR "dvb-ttpci: and can be downloaded from"
-			       " https://linuxtv.org/download/dvb/firmware/\n");
+			printk(KERN_ERR "dvb-ttpci: could not load firmware, file not found: dvb-ttpci-01.fw\n");
+			printk(KERN_ERR "dvb-ttpci: usually this should be in /usr/lib/hotplug/firmware or /lib/firmware\n");
+			printk(KERN_ERR "dvb-ttpci: and can be downloaded from https://linuxtv.org/download/dvb/firmware/\n");
 		} else
-			printk(KERN_ERR "dvb-ttpci: cannot request firmware"
-			       " (error %i)\n", ret);
+			printk(KERN_ERR "dvb-ttpci: cannot request firmware (error %i)\n",
+			       ret);
 		return -EINVAL;
 	}
 

@@ -2700,8 +2694,8 @@ static int av7110_attach(struct saa7146_dev* dev,
 		goto err_stop_arm_9;
 
 	if (FW_VERSION(av7110->arm_app)<0x2501)
-		printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. "
-			"System might be unstable!\n", FW_VERSION(av7110->arm_app));
+		printk ("dvb-ttpci: Warning, firmware version 0x%04x is too old. System might be unstable!\n",
+			FW_VERSION(av7110->arm_app));
 
 	thread = kthread_run(arm_thread, (void *) av7110, "arm_mon");
 	if (IS_ERR(thread)) {

@@ -2944,7 +2938,6 @@ static void __exit av7110_exit(void)
 module_init(av7110_init);
 module_exit(av7110_exit);
 
-MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by "
-		   "Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("driver for the SAA7146 based AV110 PCI DVB cards by Siemens, Technotrend, Hauppauge");
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others");
 MODULE_LICENSE("GPL");

index 0583d56ef5ef..520414cbe087 100644
@@ -235,8 +235,7 @@ int av7110_bootarm(struct av7110 *av7110)
 	iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
 
 	if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
-		printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
-		       "%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
+		printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: %08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
 		       ret, 0x10325476);
 		return -1;
 	}

@@ -262,8 +261,7 @@ int av7110_bootarm(struct av7110 *av7110)
 	iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
 
 	if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
-		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
-		       "saa7146_wait_for_debi_done() timed out\n");
+		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out\n");
 		return -ETIMEDOUT;
 	}
 	saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI);

@@ -271,8 +269,7 @@ int av7110_bootarm(struct av7110 *av7110)
 
 	dprintk(1, "load dram code\n");
 	if (load_dram(av7110, (u32 *)av7110->bin_root, av7110->size_root) < 0) {
-		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
-		       "load_dram() failed\n");
+		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): load_dram() failed\n");
 		return -1;
 	}
 

@@ -283,8 +280,7 @@ int av7110_bootarm(struct av7110 *av7110)
 	mwdebi(av7110, DEBISWAB, DPRAM_BASE, av7110->bin_dpram, av7110->size_dpram);
 
 	if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
-		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
-		       "saa7146_wait_for_debi_done() timed out after loading DRAM\n");
+		printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): saa7146_wait_for_debi_done() timed out after loading DRAM\n");
 		return -ETIMEDOUT;
 	}
 	saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI);

index 6f0d0161970e..896c66d4b3ae 100644
@@ -1636,5 +1636,4 @@ module_exit(budget_av_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)");

index 7b27af4d9658..20ad93bf0f54 100644
@@ -1586,6 +1586,4 @@ module_exit(budget_ci_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB cards w/ CI-module produced by "
-		   "Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards w/ CI-module produced by Siemens, Technotrend, Hauppauge");

index 591dbdfa2a13..f152eda0123a 100644
@@ -679,5 +679,4 @@ module_exit(budget_patch_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Emard, Roberto Deza, Holger Waechtler, Michael Hunold, others");
-MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 "
-		   "based so-called Budget Patch cards");
+MODULE_DESCRIPTION("Driver for full TS modified DVB-S SAA7146+AV7110 based so-called Budget Patch cards");

index fb8ede5a1531..3091b480ce22 100644
@@ -897,5 +897,4 @@ module_exit(budget_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
-MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
-		   "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge");

index 079ee098b7e3..9534f29c1ffd 100644
@@ -171,5 +171,4 @@ EXPORT_SYMBOL(ttpci_eeprom_parse_mac);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, others");
-MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards "
-		"made by Siemens, Technotrend, Hauppauge");
+MODULE_DESCRIPTION("Decode dvb_net MAC address from EEPROM of PCI DVB cards made by Siemens, Technotrend, Hauppauge");

index a45e02367321..58c4dd75bfa1 100644
@@ -279,9 +279,8 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
 		height /= 2;		/* we must set for 1-frame */
 
 	pr_debug("%s: width=%d, height=%d, both=%d\n"
-		 "  tvnorm h_delay=%d, h_start=%d, h_stop=%d, "
-		 "v_delay=%d, v_start=%d, v_stop=%d\n" , __func__,
-		width, height, V4L2_FIELD_HAS_BOTH(field),
+		 "  tvnorm h_delay=%d, h_start=%d, h_stop=%d, v_delay=%d, v_start=%d, v_stop=%d\n",
+		__func__, width, height, V4L2_FIELD_HAS_BOTH(field),
 		norm->h_delay, norm->h_start, norm->h_stop,
 		norm->v_delay, norm->video_v_start,
 		norm->video_v_stop);

@@ -309,16 +308,15 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
 		V4L2_FIELD_HAS_TOP(field)    ? "T" : "",
 		V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
 		v4l2_norm_to_name(dev->tvnorm->id));
-	pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; "
-		"vactive=%d, vdelay=%d, vscale=%d\n", __func__,
+	pr_debug("%s: hactive=%d, hdelay=%d, hscale=%d; vactive=%d, vdelay=%d, vscale=%d\n",
+		 __func__,
 		hactive, hdelay, hscale, vactive, vdelay, vscale);
 
 	comb =	((vdelay & 0x300)  >> 2) |
 		((vactive & 0x300) >> 4) |
 		((hdelay & 0x300)  >> 6) |
 		((hactive & 0x300) >> 8);
-	pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, "
-		"VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n",
+	pr_debug("%s: setting CROP_HI=%02x, VDELAY_LO=%02x, VACTIVE_LO=%02x, HDELAY_LO=%02x, HACTIVE_LO=%02x\n",
 		__func__, comb, vdelay, vactive, hdelay, hactive);
 	tw_writeb(TW68_CROP_HI, comb);
 	tw_writeb(TW68_VDELAY_LO, vdelay & 0xff);

@@ -327,8 +325,8 @@ static int tw68_set_scale(struct tw68_dev *dev, unsigned int width,
 	tw_writeb(TW68_HACTIVE_LO, hactive & 0xff);
 
 	comb = ((vscale & 0xf00) >> 4) | ((hscale & 0xf00) >> 8);
-	pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, "
-		"HSCALE_LO=%02x\n", __func__, comb, vscale, hscale);
+	pr_debug("%s: setting SCALE_HI=%02x, VSCALE_LO=%02x, HSCALE_LO=%02x\n",
+		 __func__, comb, vscale, hscale);
 	tw_writeb(TW68_SCALE_HI, comb);
 	tw_writeb(TW68_VSCALE_LO, vscale);
 	tw_writeb(TW68_HSCALE_LO, hscale);

index c90b9a4f0c24..65c2973167c6 100644
@@ -334,8 +334,8 @@ static int ccdc_set_params(void __user *params)
 
 	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
 	if (x) {
-		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc"
-			"params, %d\n", x);
+		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdcparams, %d\n",
+			x);
 		return -EFAULT;
 	}
 

index 6fba32bec974..c7523a7e0594 100644
@@ -354,8 +354,8 @@ static int ccdc_set_params(void __user *params)
 
 	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
 	if (x) {
-		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying"
-			   "ccdc params, %d\n", x);
+		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copyingccdc params, %d\n",
+			x);
 		return -EFAULT;
 	}
 

index 9a6c2cc38acb..7d2670732805 100644
@@ -705,15 +705,13 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
 					  "v4l2 sub device %s registered\n",
 					  enc_info->module_name);
 			else {
-				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
-					 " failed to register",
+				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s failed to register",
 					 enc_info->module_name);
 				ret = -ENODEV;
 				goto fail_kfree_encoders;
 			}
 		} else
-			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
-				 " currently not supported");
+			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders currently not supported");
 	}
 	/* Add amplifier subdevice for dm365 */
 	if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&

@@ -735,8 +733,7 @@ static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
 					  amp_info->module_name);
 		} else {
 			    vpbe_dev->amp = NULL;
-			    v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers"
-			    " currently not supported");
+			    v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers currently not supported");
 		}
 	} else {
 	    vpbe_dev->amp = NULL;

@@ -835,15 +832,13 @@ static int vpbe_probe(struct platform_device *pdev)
 	if (!cfg->module_name[0] ||
 	    !cfg->osd.module_name[0] ||
 	    !cfg->venc.module_name[0]) {
-		v4l2_err(pdev->dev.driver, "vpbe display module names not"
-			 " defined\n");
+		v4l2_err(pdev->dev.driver, "vpbe display module names not defined\n");
 		return ret;
 	}
 
 	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
 	if (vpbe_dev == NULL) {
-		v4l2_err(pdev->dev.driver, "Unable to allocate memory"
-			 " for vpbe_device\n");
+		v4l2_err(pdev->dev.driver, "Unable to allocate memory for vpbe_device\n");
 		return -ENOMEM;
 	}
 	vpbe_dev->cfg = cfg;

index 6efb2f1631c4..ca22c3493f55 100644
@@ -919,8 +919,7 @@ static const struct vpfe_pixel_format *
 	else
 		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
 
-	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
-		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
+	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height = %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
 		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
 		 pixfmt->bytesperline, pixfmt->sizeimage);
 	return vpfe_pix_fmt;

@@ -1088,8 +1087,7 @@ static int vpfe_enum_input(struct file *file, void *priv,
 					&subdev,
 					&index,
 					inp->index) < 0) {
-		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
-			 " for the subdev\n");
+		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found for the subdev\n");
 		return -EINVAL;
 	}
 	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];

index 5104cc0ee40e..c6a3a904afc8 100644
@@ -1152,11 +1152,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
 				timings->bt.vfrontporch &&
 				(timings->bt.vbackporch ||
 				 timings->bt.vsync))) {
-		vpif_dbg(2, debug, "Timings for width, height, "
-				"horizontal back porch, horizontal sync, "
-				"horizontal front porch, vertical back porch, "
-				"vertical sync and vertical back porch "
-				"must be defined\n");
+		vpif_dbg(2, debug, "Timings for width, height, horizontal back porch, horizontal sync, horizontal front porch, vertical back porch, vertical sync and vertical back porch must be defined\n");
 		return -EINVAL;
 	}
 

@@ -1181,8 +1177,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
 			std_info->l11 = std_info->vsize -
 				(bt->il_vfrontporch - 1);
 		} else {
-			vpif_dbg(2, debug, "Required timing values for "
-					"interlaced BT format missing\n");
+			vpif_dbg(2, debug, "Required timing values for interlaced BT format missing\n");
 			return -EINVAL;
 		}
 	} else {

index 75b27233ec2f..6b3ea1e8e97f 100644
@@ -954,11 +954,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
 				timings->bt.vfrontporch &&
 				(timings->bt.vbackporch ||
 				 timings->bt.vsync))) {
-		vpif_dbg(2, debug, "Timings for width, height, "
-				"horizontal back porch, horizontal sync, "
-				"horizontal front porch, vertical back porch, "
-				"vertical sync and vertical back porch "
-				"must be defined\n");
+		vpif_dbg(2, debug, "Timings for width, height, horizontal back porch, horizontal sync, horizontal front porch, vertical back porch, vertical sync and vertical back porch must be defined\n");
 		return -EINVAL;
 	}
 

@@ -983,8 +979,7 @@ static int vpif_s_dv_timings(struct file *file, void *priv,
 			std_info->l11 = std_info->vsize -
 				(bt->il_vfrontporch - 1);
 		} else {
-			vpif_dbg(2, debug, "Required timing values for "
-					"interlaced BT format missing\n");
+			vpif_dbg(2, debug, "Required timing values for interlaced BT format missing\n");
 			return -EINVAL;
 		}
 	} else {

index fce86f17dffc..373b796132f2 100644
@@ -261,8 +261,8 @@ static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en)
 		shift = 6;
 		break;
 	default:
-		printk(KERN_ERR "dm355_enable_clock:"
-				" Invalid selector: %d\n", clock_sel);
+		printk(KERN_ERR "dm355_enable_clock: Invalid selector: %d\n",
+		       clock_sel);
 		return -EINVAL;
 	}
 

@@ -421,8 +421,7 @@ static int vpss_probe(struct platform_device *pdev)
 	else if (!strcmp(platform_name, "dm644x_vpss"))
 		oper_cfg.platform = DM644X;
 	else {
-		dev_err(&pdev->dev, "vpss driver not supported on"
-			" this platform\n");
+		dev_err(&pdev->dev, "vpss driver not supported on this platform\n");
 		return -ENODEV;
 	}
 

index 1a1154a9dfa4..e3a8709138fa 100644
@@ -938,8 +938,7 @@ static int fimc_md_create_links(struct fimc_md *fmd)
 
 			csis = fmd->csis[pdata->mux_id].sd;
 			if (WARN(csis == NULL,
-				 "MIPI-CSI interface specified "
-				 "but s5p-csis module is not loaded!\n"))
+				 "MIPI-CSI interface specified but s5p-csis module is not loaded!\n"))
 				return -EINVAL;
 
 			pad = sensor->entity.num_pads - 1;

index af59bf4dca2d..a8bda6679422 100644
@@ -49,24 +49,17 @@
 static bool alloc_bufs_at_read;
 module_param(alloc_bufs_at_read, bool, 0444);
 MODULE_PARM_DESC(alloc_bufs_at_read,
-		"Non-zero value causes DMA buffers to be allocated when the "
-		"video capture device is read, rather than at module load "
-		"time.  This saves memory, but decreases the chances of "
-		"successfully getting those buffers.  This parameter is "
-		"only used in the vmalloc buffer mode");
+		"Non-zero value causes DMA buffers to be allocated when the video capture device is read, rather than at module load time.  This saves memory, but decreases the chances of successfully getting those buffers.  This parameter is only used in the vmalloc buffer mode");
 
 static int n_dma_bufs = 3;
 module_param(n_dma_bufs, uint, 0644);
 MODULE_PARM_DESC(n_dma_bufs,
-		"The number of DMA buffers to allocate.  Can be either two "
-		"(saves memory, makes timing tighter) or three.");
+		"The number of DMA buffers to allocate.  Can be either two (saves memory, makes timing tighter) or three.");
 
 static int dma_buf_size = VGA_WIDTH * VGA_HEIGHT * 2;  /* Worst case */
 module_param(dma_buf_size, uint, 0444);
 MODULE_PARM_DESC(dma_buf_size,
-		"The size of the allocated DMA buffers.  If actual operating "
-		"parameters require larger buffers, an attempt to reallocate "
-		"will be made.");
+		"The size of the allocated DMA buffers.  If actual operating parameters require larger buffers, an attempt to reallocate will be made.");
 #else /* MCAM_MODE_VMALLOC */
 static const bool alloc_bufs_at_read;
 static const int n_dma_bufs = 3;  /* Used by S/G_PARM */

@@ -75,15 +68,12 @@ static const int n_dma_bufs = 3;  /* Used by S/G_PARM */
 static bool flip;
 module_param(flip, bool, 0444);
 MODULE_PARM_DESC(flip,
-		"If set, the sensor will be instructed to flip the image "
-		"vertically.");
+		"If set, the sensor will be instructed to flip the image vertically.");
 
 static int buffer_mode = -1;
 module_param(buffer_mode, int, 0444);
 MODULE_PARM_DESC(buffer_mode,
-		"Set the buffer mode to be used; default is to go with what "
-		"the platform driver asks for.  Set to 0 for vmalloc, 1 for "
-		"DMA contiguous.");
+		"Set the buffer mode to be used; default is to go with what the platform driver asks for.  Set to 0 for vmalloc, 1 for DMA contiguous.");
 
 /*
  * Status flags.  Always manipulated with bit operations.

@@ -1759,8 +1749,7 @@ int mccic_register(struct mcam_camera *cam)
 		cam->buffer_mode = buffer_mode;
 	if (cam->buffer_mode == B_DMA_sg &&
 			cam->chip_id == MCAM_CAFE) {
-		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, "
-			"attempting vmalloc mode instead\n");
+		printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n");
 		cam->buffer_mode = B_vmalloc;
 	}
 	if (!mcam_buffer_mode_supported(cam->buffer_mode)) {

@@ -1828,8 +1817,7 @@ int mccic_register(struct mcam_camera *cam)
 	 */
 	if (cam->buffer_mode == B_vmalloc && !alloc_bufs_at_read) {
 		if (mcam_alloc_dma_bufs(cam, 1))
-			cam_warn(cam, "Unable to alloc DMA buffers at load"
-					" will try again later.");
+			cam_warn(cam, "Unable to alloc DMA buffers at load will try again later.");
 	}
 
 	mutex_unlock(&cam->s_mutex);

index e668dde6d857..c39b5463e0b3 100644
@@ -408,8 +408,8 @@ static int omapvid_setup_overlay(struct omap_vout_device *vout,
 	v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev,
 		"%s enable=%d addr=%pad width=%d\n height=%d color_mode=%d\n"
 		"rotation=%d mirror=%d posx=%d posy=%d out_width = %d \n"
-		"out_height=%d rotation_type=%d screen_width=%d\n",
-		__func__, ovl->is_enabled(ovl), &info.paddr, info.width, info.height,
+		"out_height=%d rotation_type=%d screen_width=%d\n", __func__,
+		ovl->is_enabled(ovl), &info.paddr, info.width, info.height,
 		info.color_mode, info.rotation, info.mirror, info.pos_x,
 		info.pos_y, info.out_width, info.out_height, info.rotation_type,
 		info.screen_width);

@@ -791,7 +791,8 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 		dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr,
 				size, DMA_TO_DEVICE);
 		if (dma_mapping_error(vout->vid_dev->v4l2_dev.dev, dma_addr))
-			v4l2_err(&vout->vid_dev->v4l2_dev, "dma_map_single failed\n");
+			v4l2_err(&vout->vid_dev->v4l2_dev,
+				 "dma_map_single failed\n");
 
 		vout->queued_buf_addr[vb->i] = (u8 *)vout->buf_phy_addr[vb->i];
 	}

@@ -1657,8 +1658,8 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 	/* Turn of the pipeline */
 	ret = omapvid_apply_changes(vout);
 	if (ret)
-		v4l2_err(&vout->vid_dev->v4l2_dev, "failed to change mode in"
-				" streamoff\n");
+		v4l2_err(&vout->vid_dev->v4l2_dev,
+			 "failed to change mode in streamoff\n");
 
 	INIT_LIST_HEAD(&vout->dma_queue);
 	ret = videobuf_streamoff(&vout->vbq);

@@ -1858,8 +1859,8 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
 	vfd = vout->vfd = video_device_alloc();
 
 	if (!vfd) {
-		printk(KERN_ERR VOUT_NAME ": could not allocate"
-				" video device struct\n");
+		printk(KERN_ERR VOUT_NAME
+		       ": could not allocate video device struct\n");
 		v4l2_ctrl_handler_free(hdl);
 		return -ENOMEM;
 	}

@@ -1984,16 +1985,17 @@ static int __init omap_vout_create_video_devices(struct platform_device *pdev)
 		 */
 		vfd = vout->vfd;
 		if (video_register_device(vfd, VFL_TYPE_GRABBER, -1) < 0) {
-			dev_err(&pdev->dev, ": Could not register "
-					"Video for Linux device\n");
+			dev_err(&pdev->dev,
+				": Could not register Video for Linux device\n");
 			vfd->minor = -1;
 			ret = -ENODEV;
 			goto error2;
 		}
 		video_set_drvdata(vfd, vout);
 
-		dev_info(&pdev->dev, ": registered and initialized"
-				" video device %d\n", vfd->minor);
+		dev_info(&pdev->dev,
+			 ": registered and initialized video device %d\n",
+			 vfd->minor);
 		if (k == (pdev->num_resources - 1))
 			return 0;
 

index b8638e4e1627..92c4e1826356 100644
@@ -139,8 +139,9 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num,
 			(void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch);
 	if (ret < 0) {
 		vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED;
-		dev_info(&pdev->dev, ": failed to allocate DMA Channel for"
-				" video%d\n", vfd->minor);
+		dev_info(&pdev->dev,
+			 ": failed to allocate DMA Channel for video%d\n",
+			 vfd->minor);
 	}
 	init_waitqueue_head(&vout->vrfb_dma_tx.wait);
 

index 0321d84addc7..2e1b17ef82a3 100644
@@ -480,8 +480,8 @@ void omap3isp_hist_dma_done(struct isp_device *isp)
 	    omap3isp_stat_pcr_busy(&isp->isp_hist)) {
 		/* Histogram cannot be enabled in this frame anymore */
 		atomic_set(&isp->isp_hist.buf_err, 1);
-		dev_dbg(isp->dev, "hist: Out of synchronization with "
-				  "CCDC. Ignoring next buffer.\n");
+		dev_dbg(isp->dev,
+			"hist: Out of synchronization with CCDC. Ignoring next buffer.\n");
 	}
 }
 

index 882310eb45cc..7207558d722c 100644
@@ -151,8 +151,8 @@ static int ccdc_lsc_validate_config(struct isp_ccdc_device *ccdc,
 	}
 
 	if (lsc_cfg->offset & 3) {
-		dev_dbg(isp->dev, "CCDC: LSC: Offset must be a multiple of "
-			"4\n");
+		dev_dbg(isp->dev,
+			"CCDC: LSC: Offset must be a multiple of 4\n");
 		return -EINVAL;
 	}
 

@@ -416,8 +416,9 @@ static int ccdc_lsc_config(struct isp_ccdc_device *ccdc,
 		return 0;
 
 	if (update != (OMAP3ISP_CCDC_CONFIG_LSC | OMAP3ISP_CCDC_TBL_LSC)) {
-		dev_dbg(to_device(ccdc), "%s: Both LSC configuration and table "
-			"need to be supplied\n", __func__);
+		dev_dbg(to_device(ccdc),
+			"%s: Both LSC configuration and table need to be supplied\n",
+			__func__);
 		return -EINVAL;
 	}
 

index f75a1be29d84..7dae2fe0d42d 100644
@@ -753,8 +753,8 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
 						 ISPCSI2_PHY_IRQSTATUS);
 		isp_reg_writel(isp, cpxio1_irqstatus,
 			       csi2->regs1, ISPCSI2_PHY_IRQSTATUS);
-		dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ "
-			"%x\n", cpxio1_irqstatus);
+		dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ %x\n",
+			cpxio1_irqstatus);
 		pipe->error = true;
 	}
 

@@ -763,13 +763,8 @@ void omap3isp_csi2_isr(struct isp_csi2_device *csi2)
 			      ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ |
 			      ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ |
 			      ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) {
-		dev_dbg(isp->dev, "CSI2 Err:"
-			" OCP:%d,"
-			" Short_pack:%d,"
-			" ECC:%d,"
-			" CPXIO2:%d,"
-			" FIFO_OVF:%d,"
-			"\n",
+		dev_dbg(isp->dev,
+			"CSI2 Err: OCP:%d, Short_pack:%d, ECC:%d, CPXIO2:%d, FIFO_OVF:%d,\n",
 			(csi2_irqstatus &
 			 ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0,
 			(csi2_irqstatus &

index 495447d66cfd..871d4fe09c7f 100644
@@ -267,8 +267,8 @@ int omap3isp_csiphy_acquire(struct isp_csiphy *phy)
 	int rval;
 
 	if (phy->vdd == NULL) {
-		dev_err(phy->isp->dev, "Power regulator for CSI PHY not "
-			"available\n");
+		dev_err(phy->isp->dev,
+			"Power regulator for CSI PHY not available\n");
 		return -ENODEV;
 	}
 

index ccaf92f39236..d44626f20ac6 100644
@@ -304,8 +304,8 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp)
 	aewb_recover_cfg = devm_kzalloc(isp->dev, sizeof(*aewb_recover_cfg),
 					GFP_KERNEL);
 	if (!aewb_recover_cfg) {
-		dev_err(aewb->isp->dev, "AEWB: cannot allocate memory for "
-					"recover configuration.\n");
+		dev_err(aewb->isp->dev,
+			"AEWB: cannot allocate memory for recover configuration.\n");
 		return -ENOMEM;
 	}
 

@@ -321,8 +321,8 @@ int omap3isp_h3a_aewb_init(struct isp_device *isp)
 	aewb_recover_cfg->subsample_hor_inc = OMAP3ISP_AEWB_MIN_SUB_INC;
 
 	if (h3a_aewb_validate_params(aewb, aewb_recover_cfg)) {
-		dev_err(aewb->isp->dev, "AEWB: recover configuration is "
-					"invalid.\n");
+		dev_err(aewb->isp->dev,
+			"AEWB: recover configuration is invalid.\n");
 		return -EINVAL;
 	}
 

index 92937f7eecef..99bd6cc21d86 100644
@@ -367,8 +367,8 @@ int omap3isp_h3a_af_init(struct isp_device *isp)
 	af_recover_cfg = devm_kzalloc(isp->dev, sizeof(*af_recover_cfg),
 				      GFP_KERNEL);
 	if (!af_recover_cfg) {
-		dev_err(af->isp->dev, "AF: cannot allocate memory for recover "
-				      "configuration.\n");
+		dev_err(af->isp->dev,
+			"AF: cannot allocate memory for recover configuration.\n");
 		return -ENOMEM;
 	}
 

@@ -379,8 +379,8 @@ int omap3isp_h3a_af_init(struct isp_device *isp)
 	af_recover_cfg->paxel.v_cnt = OMAP3ISP_AF_PAXEL_VERTICAL_COUNT_MIN;
 	af_recover_cfg->paxel.line_inc = OMAP3ISP_AF_PAXEL_INCREMENT_MIN;
 	if (h3a_af_validate_params(af, af_recover_cfg)) {
-		dev_err(af->isp->dev, "AF: recover configuration is "
-				      "invalid.\n");
+		dev_err(af->isp->dev,
+			"AF: recover configuration is invalid.\n");
 		return -EINVAL;
 	}
 

126 lines not on this page · raw message

index 52081ddc9bf2..cf787eae11b7 100644
@@ -793,18 +793,17 @@ static int vidioc_g_crop(struct file *file, void *priv,
 		cr->c.top = top;
 		cr->c.width = ctx->img_width - left - right;
 		cr->c.height = ctx->img_height - top - bottom;
-		mfc_debug(2, "Cropping info [h264]: l=%d t=%d "
-			"w=%d h=%d (r=%d b=%d fw=%d fh=%d\n", left, top,
-			cr->c.width, cr->c.height, right, bottom,
-			ctx->buf_width, ctx->buf_height);
+		mfc_debug(2, "Cropping info [h264]: l=%d t=%d w=%d h=%d (r=%d b=%d fw=%d fh=%d\n",
+			  left, top, cr->c.width, cr->c.height, right, bottom,
+			  ctx->buf_width, ctx->buf_height);
 	} else {
 		cr->c.left = 0;
 		cr->c.top = 0;
 		cr->c.width = ctx->img_width;
 		cr->c.height = ctx->img_height;
-		mfc_debug(2, "Cropping info: w=%d h=%d fw=%d "
-			"fh=%d\n", cr->c.width,	cr->c.height, ctx->buf_width,
-							ctx->buf_height);
+		mfc_debug(2, "Cropping info: w=%d h=%d fw=%d fh=%d\n",
+			  cr->c.width,	cr->c.height, ctx->buf_width,
+			  ctx->buf_height);
 	}
 	return 0;
 }

index 81e1e4ce6c24..f4301d5bbd32 100644
@@ -1293,14 +1293,11 @@ static int s5p_mfc_run_init_dec_buffers(struct s5p_mfc_ctx *ctx)
 	 * First set the output frame buffers
 	 */
 	if (ctx->capture_state != QUEUE_BUFS_MMAPED) {
-		mfc_err("It seems that not all destionation buffers were "
-			"mmaped\nMFC requires that all destination are mmaped "
-			"before starting processing\n");
+		mfc_err("It seems that not all destionation buffers were mmaped\nMFC requires that all destination are mmaped before starting processing\n");
 		return -EAGAIN;
 	}
 	if (list_empty(&ctx->src_queue)) {
-		mfc_err("Header has been deallocated in the middle of"
-			" initialization\n");
+		mfc_err("Header has been deallocated in the middle of initialization\n");
 		return -EIO;
 	}
 	temp_vb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, list);