Skip to contentSkip to conversation

ARM64: Uprobe support added

PATCH Applied Pratyush Anand 2 participants 13 messages Nov 2, 2016 – Nov 7, 2016 1 message not in the archive

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v3 cover ARM64: Uprobe support added

Changes since v2:
* arm64 specific is_trap_insn() removed. Using default implementation.
* arch_uprobe_analyze_insn() returns -ENOTSUPP for 32bit task probe.

V2 was here: https://lkml.org/lkml/2016/9/27/58
Patches have been rebased on v4.9-rc3. They have been tested with mustang and seattle platform for following test cases.

1. Step-able instructions, like sub, ldr, add etc.
2. Simulation-able like ret, cbnz, cbz etc.
3. uretprobe
4. Reject-able instructions like sev, wfe etc.
5. trapped and abort xol path
6. probe at unaligned user address.
7. longjump test cases

aarch32 task probing is not yet supported.

Pratyush Anand (6):
arm64: kprobe: protect/rename few definitions to be reused by uprobe
arm64: kgdb_step_brk_fn: ignore other's exception
arm64: Handle TRAP_TRACE for user mode as well
arm64: Handle TRAP_BRKPT for user mode as well
arm64: introduce mm context flag to keep 32 bit task information
arm64: Add uprobe support

 arch/arm64/Kconfig                      |   3 +
 arch/arm64/include/asm/cacheflush.h     |   1 +
 arch/arm64/include/asm/debug-monitors.h |   3 +
 arch/arm64/include/asm/elf.h            |  12 +-
 arch/arm64/include/asm/mmu.h            |   1 +
 arch/arm64/include/asm/probes.h         |  19 +--
 arch/arm64/include/asm/ptrace.h         |   8 ++
 arch/arm64/include/asm/thread_info.h    |   5 +-
 arch/arm64/include/asm/uprobes.h        |  36 ++++++
 arch/arm64/kernel/debug-monitors.c      |  40 +++---
 arch/arm64/kernel/kgdb.c                |   3 +
 arch/arm64/kernel/probes/Makefile       |   2 +
 arch/arm64/kernel/probes/decode-insn.c  |  32 ++---
 arch/arm64/kernel/probes/decode-insn.h  |   8 +-
 arch/arm64/kernel/probes/kprobes.c      |  36 +++---
 arch/arm64/kernel/probes/uprobes.c      | 216 ++++++++++++++++++++++++++++++++
 arch/arm64/kernel/signal.c              |   3 +
 arch/arm64/mm/flush.c                   |   2 +-
 18 files changed, 366 insertions(+), 64 deletions(-)
 create mode 100644 arch/arm64/include/asm/uprobes.h
 create mode 100644 arch/arm64/kernel/probes/uprobes.c
Signature · 1 line
2.7.4
#1 lore raw

PATCH v3 1/6 arm64: kprobe: protect/rename few definitions to be reused by uprobe

decode-insn code has to be reused by arm64 uprobe implementation as well. Therefore, this patch protects some portion of kprobe code and renames few other, so that decode-insn functionality can be reused by uprobe even when CONFIG_KPROBES is not defined.

kprobe_opcode_t and struct arch_specific_insn are also defined by linux/kprobes.h, when CONFIG_KPROBES is not defined. So, protect these definitions in asm/probes.h.

linux/kprobes.h already includes asm/kprobes.h. Therefore, remove inclusion of asm/kprobes.h from decode-insn.c.

There are some definitions like kprobe_insn and kprobes_handler_t etc can be re-used by uprobe. So, it would be better to remove 'k' from their names.

struct arch_specific_insn is specific to kprobe. Therefore, introduce a new struct arch_probe_insn which will be common for both kprobe and uprobe, so that decode-insn code can be shared. Modify kprobe code accordingly.

Function arm_probe_decode_insn() will be needed by uprobe as well. So make it global.

---
 arch/arm64/include/asm/probes.h        | 19 ++++++++++--------
 arch/arm64/kernel/probes/decode-insn.c | 32 ++++++++++++++++--------------
 arch/arm64/kernel/probes/decode-insn.h |  8 ++++++--
 arch/arm64/kernel/probes/kprobes.c     | 36 +++++++++++++++++-----------------
 4 files changed, 52 insertions(+), 43 deletions(-)
arch/arm64/include/asm/probes.h +11 -8
index 5af574d632fa..e175a825b187 100644
@@ -17,19 +17,22 @@
 
 #include <asm/opcodes.h>
 
-struct kprobe;
-struct arch_specific_insn;
-
-typedef u32 kprobe_opcode_t;
-typedef void (kprobes_handler_t) (u32 opcode, long addr, struct pt_regs *);
+typedef u32 probe_opcode_t;
+typedef void (probes_handler_t) (u32 opcode, long addr, struct pt_regs *);
 
 /* architecture specific copy of original instruction */
-struct arch_specific_insn {
-	kprobe_opcode_t *insn;
+struct arch_probe_insn {
+	probe_opcode_t *insn;
 	pstate_check_t *pstate_cc;
-	kprobes_handler_t *handler;
+	probes_handler_t *handler;
 	/* restore address after step xol */
 	unsigned long restore;
 };
+#ifdef CONFIG_KPROBES
+typedef u32 kprobe_opcode_t;
+struct arch_specific_insn {
+	struct arch_probe_insn api;
+};
+#endif
 
 #endif
arch/arm64/kernel/probes/decode-insn.c +17 -15
index d1731bf977ef..8a29d2982eec 100644
@@ -78,8 +78,8 @@ static bool __kprobes aarch64_insn_is_steppable(u32 insn)
  *   INSN_GOOD         If instruction is supported and uses instruction slot,
  *   INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
  */
-static enum kprobe_insn __kprobes
-arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+enum probe_insn __kprobes
+arm_probe_decode_insn(probe_opcode_t insn, struct arch_probe_insn *api)
 {
 	/*
 	 * Instructions reading or modifying the PC won't work from the XOL
@@ -89,26 +89,26 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 		return INSN_GOOD;
 
 	if (aarch64_insn_is_bcond(insn)) {
-		asi->handler = simulate_b_cond;
+		api->handler = simulate_b_cond;
 	} else if (aarch64_insn_is_cbz(insn) ||
 	    aarch64_insn_is_cbnz(insn)) {
-		asi->handler = simulate_cbz_cbnz;
+		api->handler = simulate_cbz_cbnz;
 	} else if (aarch64_insn_is_tbz(insn) ||
 	    aarch64_insn_is_tbnz(insn)) {
-		asi->handler = simulate_tbz_tbnz;
+		api->handler = simulate_tbz_tbnz;
 	} else if (aarch64_insn_is_adr_adrp(insn)) {
-		asi->handler = simulate_adr_adrp;
+		api->handler = simulate_adr_adrp;
 	} else if (aarch64_insn_is_b(insn) ||
 	    aarch64_insn_is_bl(insn)) {
-		asi->handler = simulate_b_bl;
+		api->handler = simulate_b_bl;
 	} else if (aarch64_insn_is_br(insn) ||
 	    aarch64_insn_is_blr(insn) ||
 	    aarch64_insn_is_ret(insn)) {
-		asi->handler = simulate_br_blr_ret;
+		api->handler = simulate_br_blr_ret;
 	} else if (aarch64_insn_is_ldr_lit(insn)) {
-		asi->handler = simulate_ldr_literal;
+		api->handler = simulate_ldr_literal;
 	} else if (aarch64_insn_is_ldrsw_lit(insn)) {
-		asi->handler = simulate_ldrsw_literal;
+		api->handler = simulate_ldrsw_literal;
 	} else {
 		/*
 		 * Instruction cannot be stepped out-of-line and we don't
@@ -120,6 +120,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
 	return INSN_GOOD_NO_SLOT;
 }
 
+#ifdef CONFIG_KPROBES
 static bool __kprobes
 is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
 {
@@ -138,12 +139,12 @@ is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end)
 	return false;
 }
 
-enum kprobe_insn __kprobes
+enum probe_insn __kprobes
 arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
 {
-	enum kprobe_insn decoded;
-	kprobe_opcode_t insn = le32_to_cpu(*addr);
-	kprobe_opcode_t *scan_end = NULL;
+	enum probe_insn decoded;
+	probe_opcode_t insn = le32_to_cpu(*addr);
+	probe_opcode_t *scan_end = NULL;
 	unsigned long size = 0, offset = 0;
 
 	/*
@@ -162,7 +163,7 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
 		else
 			scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE;
 	}
-	decoded = arm_probe_decode_insn(insn, asi);
+	decoded = arm_probe_decode_insn(insn, &asi->api);
 
 	if (decoded != INSN_REJECTED && scan_end)
 		if (is_probed_address_atomic(addr - 1, scan_end))
@@ -170,3 +171,4 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi)
 
 	return decoded;
 }
+#endif
arch/arm64/kernel/probes/decode-insn.h +6 -2
index d438289646a6..76d3f315407f 100644
@@ -23,13 +23,17 @@
  */
 #define MAX_ATOMIC_CONTEXT_SIZE	(128 / sizeof(kprobe_opcode_t))
 
-enum kprobe_insn {
+enum probe_insn {
 	INSN_REJECTED,
 	INSN_GOOD_NO_SLOT,
 	INSN_GOOD,
 };
 
-enum kprobe_insn __kprobes
+#ifdef CONFIG_KPROBES
+enum probe_insn __kprobes
 arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi);
+#endif
+enum probe_insn __kprobes
+arm_probe_decode_insn(probe_opcode_t insn, struct arch_probe_insn *asi);
 
 #endif /* _ARM_KERNEL_KPROBES_ARM64_H */
arch/arm64/kernel/probes/kprobes.c +18 -18
index f5077ea7af6d..1decd2b2c730 100644
@@ -44,31 +44,31 @@ post_kprobe_handler(struct kprobe_ctlblk *, struct pt_regs *);
 static void __kprobes arch_prepare_ss_slot(struct kprobe *p)
 {
 	/* prepare insn slot */
-	p->ainsn.insn[0] = cpu_to_le32(p->opcode);
+	p->ainsn.api.insn[0] = cpu_to_le32(p->opcode);
 
-	flush_icache_range((uintptr_t) (p->ainsn.insn),
-			   (uintptr_t) (p->ainsn.insn) +
+	flush_icache_range((uintptr_t) (p->ainsn.api.insn),
+			   (uintptr_t) (p->ainsn.api.insn) +
 			   MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 
 	/*
 	 * Needs restoring of return address after stepping xol.
 	 */
-	p->ainsn.restore = (unsigned long) p->addr +
+	p->ainsn.api.restore = (unsigned long) p->addr +
 	  sizeof(kprobe_opcode_t);
 }
 
 static void __kprobes arch_prepare_simulate(struct kprobe *p)
 {
 	/* This instructions is not executed xol. No need to adjust the PC */
-	p->ainsn.restore = 0;
+	p->ainsn.api.restore = 0;
 }
 
 static void __kprobes arch_simulate_insn(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
-	if (p->ainsn.handler)
-		p->ainsn.handler((u32)p->opcode, (long)p->addr, regs);
+	if (p->ainsn.api.handler)
+		p->ainsn.api.handler((u32)p->opcode, (long)p->addr, regs);
 
 	/* single step simulated, now go for post processing */
 	post_kprobe_handler(kcb, regs);
@@ -98,18 +98,18 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 		return -EINVAL;
 
 	case INSN_GOOD_NO_SLOT:	/* insn need simulation */
-		p->ainsn.insn = NULL;
+		p->ainsn.api.insn = NULL;
 		break;
 
 	case INSN_GOOD:	/* instruction uses slot */
-		p->ainsn.insn = get_insn_slot();
-		if (!p->ainsn.insn)
+		p->ainsn.api.insn = get_insn_slot();
+		if (!p->ainsn.api.insn)
 			return -ENOMEM;
 		break;
 	};
 
 	/* prepare the instruction */
-	if (p->ainsn.insn)
+	if (p->ainsn.api.insn)
 		arch_prepare_ss_slot(p);
 	else
 		arch_prepare_simulate(p);
@@ -142,9 +142,9 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	if (p->ainsn.insn) {
-		free_insn_slot(p->ainsn.insn, 0);
-		p->ainsn.insn = NULL;
+	if (p->ainsn.api.insn) {
+		free_insn_slot(p->ainsn.api.insn, 0);
+		p->ainsn.api.insn = NULL;
 	}
 }
 
@@ -244,9 +244,9 @@ static void __kprobes setup_singlestep(struct kprobe *p,
 	}
 
 
-	if (p->ainsn.insn) {
+	if (p->ainsn.api.insn) {
 		/* prepare for single stepping */
-		slot = (unsigned long)p->ainsn.insn;
+		slot = (unsigned long)p->ainsn.api.insn;
 
 		set_ss_context(kcb, slot);	/* mark pending ss */
 
@@ -295,8 +295,8 @@ post_kprobe_handler(struct kprobe_ctlblk *kcb, struct pt_regs *regs)
 		return;
 
 	/* return addr restore if non-branching insn */
-	if (cur->ainsn.restore != 0)
-		instruction_pointer_set(regs, cur->ainsn.restore);
+	if (cur->ainsn.api.restore != 0)
+		instruction_pointer_set(regs, cur->ainsn.api.restore);
 
 	/* restore back original saved kprobe variables and continue */
 	if (kcb->kprobe_status == KPROBE_REENTER) {
Signature · 1 line
2.7.4
#2 lore raw

PATCH v3 2/6 arm64: kgdb_step_brk_fn: ignore other's exception

In reply to Pratyush Anand

ARM64 step exception does not have any syndrome information. So, it is responsibility of exception handler to take care that they handle it only if exception was raised for them.

Since kgdb_step_brk_fn() always returns 0, therefore we might have problem when we will have other step handler registered as well.

This patch fixes kgdb_step_brk_fn() to return error in case of step handler was not meant for kgdb.

---
 arch/arm64/kernel/kgdb.c | 3 +++
 1 file changed, 3 insertions(+)
arch/arm64/kernel/kgdb.c +3 -0
index e017a9493b92..d217c9e95b06 100644
@@ -247,6 +247,9 @@ NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);
 
 static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
 {
+	if (!kgdb_single_step)
+		return DBG_HOOK_ERROR;
+
 	kgdb_handle_exception(1, SIGTRAP, 0, regs);
 	return 0;
 }
Signature · 1 line
2.7.4

A message that is not in the archive (sent off-list or not yet received): CAMNZz5Bjr1f-uzgCx-svFXV_u8xfKudChURVULAqFzu158cxfg@mail.gmail.com

#4 lore raw

Re: [PATCH V3 2/6] arm64: kgdb_step_brk_fn: ignore other's exception

Quoted 29 lines · Sandeepa Prabhu

On Wed, Nov 2, 2016 at 2:40 PM, Pratyush Anand <[email protected] <mailto:[email protected]>> wrote:

ARM64 step exception does not have any syndrome information. So, it is responsibility of exception handler to take care that they handle it only if exception was raised for them.

Since kgdb_step_brk_fn() always returns 0, therefore we might have problem
when we will have other step handler registered as well.

This patch fixes kgdb_step_brk_fn() to return error in case of step handler
was not meant for kgdb.

<mailto:[email protected]>>
---
arch/arm64/kernel/kgdb.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c index e017a9493b92..d217c9e95b06 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -247,6 +247,9 @@ NOKPROBE_SYMBOL(kgdb_compiled_brk_fn);

Quoted 8 lines

static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr) {
+ if (!kgdb_single_step)
+ return DBG_HOOK_ERROR;
+

?This is needed. So, single stepping in kprobes working all these days because kprobes handler was registered earlier to kgdb handler!?

Actually kprobe_single_step_handler() is not called through call_step_hook(), so it is always safe.

We had discussed here (https://lkml.org/lkml/2016/9/7/6) that why we can not register kprobe_single_step_handler() via register_set_hook() and only invoke call_step_hook().

~Pratyush

#5 lore raw

PATCH v3 3/6 arm64: Handle TRAP_TRACE for user mode as well

In reply to Pratyush Anand

uprobe registers a handler at step_hook. So, single_step_handler now checks for user mode as well if there is a valid hook.

---
 arch/arm64/kernel/debug-monitors.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
arch/arm64/kernel/debug-monitors.c +12 -10
index 73ae90ef434c..a8f8de012250 100644
@@ -226,6 +226,8 @@ static void send_user_sigtrap(int si_code)
 static int single_step_handler(unsigned long addr, unsigned int esr,
 			       struct pt_regs *regs)
 {
+	bool handler_found = false;
+
 	/*
 	 * If we are stepping a pending breakpoint, call the hw_breakpoint
 	 * handler first.
@@ -233,7 +235,14 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
 	if (!reinstall_suspended_bps(regs))
 		return 0;
 
-	if (user_mode(regs)) {
+#ifdef	CONFIG_KPROBES
+	if (kprobe_single_step_handler(regs, esr) == DBG_HOOK_HANDLED)
+		handler_found = true;
+#endif
+	if (!handler_found && call_step_hook(regs, esr) == DBG_HOOK_HANDLED)
+		handler_found = true;
+
+	if (!handler_found && user_mode(regs)) {
 		send_user_sigtrap(TRAP_TRACE);
 
 		/*
@@ -243,15 +252,8 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
 		 * to the active-not-pending state).
 		 */
 		user_rewind_single_step(current);
-	} else {
-#ifdef	CONFIG_KPROBES
-		if (kprobe_single_step_handler(regs, esr) == DBG_HOOK_HANDLED)
-			return 0;
-#endif
-		if (call_step_hook(regs, esr) == DBG_HOOK_HANDLED)
-			return 0;
-
-		pr_warning("Unexpected kernel single-step exception at EL1\n");
+	} else if (!handler_found) {
+		pr_warn("Unexpected kernel single-step exception at EL1\n");
 		/*
 		 * Re-enable stepping since we know that we will be
 		 * returning to regs.
Signature · 1 line
2.7.4
#6 lore raw

PATCH v3 4/6 arm64: Handle TRAP_BRKPT for user mode as well

In reply to Pratyush Anand

uprobe is registered at break_hook with a unique ESR code. So, when a TRAP_BRKPT occurs, call_break_hook checks if it was for uprobe. If not, then send a SIGTRAP to user.

---
 arch/arm64/kernel/debug-monitors.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
arch/arm64/kernel/debug-monitors.c +11 -7
index a8f8de012250..605df76f0a06 100644
@@ -306,16 +306,20 @@ NOKPROBE_SYMBOL(call_break_hook);
 static int brk_handler(unsigned long addr, unsigned int esr,
 		       struct pt_regs *regs)
 {
-	if (user_mode(regs)) {
-		send_user_sigtrap(TRAP_BRKPT);
-	}
+	bool handler_found = false;
+
 #ifdef	CONFIG_KPROBES
-	else if ((esr & BRK64_ESR_MASK) == BRK64_ESR_KPROBES) {
-		if (kprobe_breakpoint_handler(regs, esr) != DBG_HOOK_HANDLED)
-			return -EFAULT;
+	if ((esr & BRK64_ESR_MASK) == BRK64_ESR_KPROBES) {
+		if (kprobe_breakpoint_handler(regs, esr) == DBG_HOOK_HANDLED)
+			handler_found = true;
 	}
 #endif
-	else if (call_break_hook(regs, esr) != DBG_HOOK_HANDLED) {
+	if (!handler_found && call_break_hook(regs, esr) == DBG_HOOK_HANDLED)
+		handler_found = true;
+
+	if (!handler_found && user_mode(regs)) {
+		send_user_sigtrap(TRAP_BRKPT);
+	} else if (!handler_found) {
 		pr_warn("Unexpected kernel BRK exception at EL1\n");
 		return -EFAULT;
 	}
Signature · 1 line
2.7.4
#7 lore raw

PATCH v3 5/6 arm64: introduce mm context flag to keep 32 bit task information

In reply to Pratyush Anand

We need to decide in some cases like uprobe instruction analysis that whether the current mm context belongs to a 32 bit task or 64 bit.

This patch has introduced an unsigned flag variable in mm_context_t. Currently, we set and clear TIF_32BIT depending on the condition that whether an elf binary load sets personality for 32 bit or 64 bit respectively.

---
 arch/arm64/include/asm/elf.h | 12 ++++++++++--
 arch/arm64/include/asm/mmu.h |  1 +
 2 files changed, 11 insertions(+), 2 deletions(-)
arch/arm64/include/asm/elf.h +10 -2
index a55384f4a5d7..5d1700425efe 100644
@@ -138,7 +138,11 @@ typedef struct user_fpsimd_state elf_fpregset_t;
  */
 #define ELF_PLAT_INIT(_r, load_addr)	(_r)->regs[0] = 0
 
-#define SET_PERSONALITY(ex)		clear_thread_flag(TIF_32BIT);
+#define SET_PERSONALITY(ex)						\
+({									\
+	clear_bit(TIF_32BIT, &current->mm->context.flags);		\
+	clear_thread_flag(TIF_32BIT);					\
+})
 
 /* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
 #define ARCH_DLINFO							\
@@ -183,7 +187,11 @@ typedef compat_elf_greg_t		compat_elf_gregset_t[COMPAT_ELF_NGREG];
 					 ((x)->e_flags & EF_ARM_EABI_MASK))
 
 #define compat_start_thread		compat_start_thread
-#define COMPAT_SET_PERSONALITY(ex)	set_thread_flag(TIF_32BIT);
+#define COMPAT_SET_PERSONALITY(ex)					\
+({									\
+	set_bit(TIF_32BIT, &current->mm->context.flags);		\
+	set_thread_flag(TIF_32BIT);					\
+ })
 #define COMPAT_ARCH_DLINFO
 extern int aarch32_setup_vectors_page(struct linux_binprm *bprm,
 				      int uses_interp);
arch/arm64/include/asm/mmu.h +1 -0
index 8d9fce037b2f..d4fa21543771 100644
@@ -19,6 +19,7 @@
 typedef struct {
 	atomic64_t	id;
 	void		*vdso;
+	unsigned long	flags;
 } mm_context_t;
 
 /*
Signature · 1 line
2.7.4
#8 lore raw

PATCH v3 6/6 arm64: Add uprobe support

In reply to Pratyush Anand

This patch adds support for uprobe on ARM64 architecture.

Unit tests for following have been done so far and they have been found working
1. Step-able instructions, like sub, ldr, add etc.
2. Simulation-able like ret, cbnz, cbz etc.
3. uretprobe
4. Reject-able instructions like sev, wfe etc.
5. trapped and abort xol path
6. probe at unaligned user address.
7. longjump test cases

Currently it does not support aarch32 instruction probing.

---
 arch/arm64/Kconfig                      |   3 +
 arch/arm64/include/asm/cacheflush.h     |   1 +
 arch/arm64/include/asm/debug-monitors.h |   3 +
 arch/arm64/include/asm/ptrace.h         |   8 ++
 arch/arm64/include/asm/thread_info.h    |   5 +-
 arch/arm64/include/asm/uprobes.h        |  36 ++++++
 arch/arm64/kernel/probes/Makefile       |   2 +
 arch/arm64/kernel/probes/uprobes.c      | 216 ++++++++++++++++++++++++++++++++
 arch/arm64/kernel/signal.c              |   3 +
 arch/arm64/mm/flush.c                   |   2 +-
 10 files changed, 277 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/include/asm/uprobes.h
 create mode 100644 arch/arm64/kernel/probes/uprobes.c
arch/arm64/Kconfig +3 -0
index 969ef880d234..77a807a844ac 100644
@@ -238,6 +238,9 @@ config PGTABLE_LEVELS
 	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
 	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
 
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
arch/arm64/include/asm/cacheflush.h +1 -0
index 2e5fb976a572..e9f64ecb75ce 100644
@@ -71,6 +71,7 @@ extern void __flush_dcache_area(void *addr, size_t len);
 extern void __clean_dcache_area_poc(void *addr, size_t len);
 extern void __clean_dcache_area_pou(void *addr, size_t len);
 extern long __flush_cache_user_range(unsigned long start, unsigned long end);
+extern void sync_icache_aliases(void *kaddr, unsigned long len);
 
 static inline void flush_cache_mm(struct mm_struct *mm)
 {
arch/arm64/include/asm/debug-monitors.h +3 -0
index b71420a12f26..a44cf5225429 100644
@@ -68,6 +68,9 @@
 #define BRK64_ESR_MASK		0xFFFF
 #define BRK64_ESR_KPROBES	0x0004
 #define BRK64_OPCODE_KPROBES	(AARCH64_BREAK_MON | (BRK64_ESR_KPROBES << 5))
+/* uprobes BRK opcodes with ESR encoding  */
+#define BRK64_ESR_UPROBES	0x0005
+#define BRK64_OPCODE_UPROBES	(AARCH64_BREAK_MON | (BRK64_ESR_UPROBES << 5))
 
 /* AArch32 */
 #define DBG_ESR_EVT_BKPT	0x4
arch/arm64/include/asm/ptrace.h +8 -0
index ada08b5b036d..513daf050e84 100644
@@ -217,6 +217,14 @@ int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task);
 
 #include <asm-generic/ptrace.h>
 
+#define procedure_link_pointer(regs)	((regs)->regs[30])
+
+static inline void procedure_link_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	procedure_link_pointer(regs) = val;
+}
+
 #undef profile_pc
 extern unsigned long profile_pc(struct pt_regs *regs);
 
arch/arm64/include/asm/thread_info.h +4 -1
index e9ea5a6bd449..f6859831462e 100644
@@ -112,6 +112,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_NEED_RESCHED	1
 #define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_FOREIGN_FPSTATE	3	/* CPU's FP state is not current's */
+#define TIF_UPROBE		4	/* uprobe breakpoint or singlestep */
 #define TIF_NOHZ		7
 #define TIF_SYSCALL_TRACE	8
 #define TIF_SYSCALL_AUDIT	9
@@ -132,10 +133,12 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
-				 _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE)
+				 _TIF_NOTIFY_RESUME | _TIF_FOREIGN_FPSTATE | \
+				 _TIF_UPROBE)
 
 #define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
 				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP | \
arch/arm64/include/asm/uprobes.h new file +36 -0
new file mode 100644
index 000000000000..8d004073d0e8
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2014-2016 Pratyush Anand <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_UPROBES_H
+#define _ASM_UPROBES_H
+
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/probes.h>
+
+#define MAX_UINSN_BYTES		AARCH64_INSN_SIZE
+
+#define UPROBE_SWBP_INSN	BRK64_OPCODE_UPROBES
+#define UPROBE_SWBP_INSN_SIZE	AARCH64_INSN_SIZE
+#define UPROBE_XOL_SLOT_BYTES	MAX_UINSN_BYTES
+
+typedef u32 uprobe_opcode_t;
+
+struct arch_uprobe_task {
+};
+
+struct arch_uprobe {
+	union {
+		u8 insn[MAX_UINSN_BYTES];
+		u8 ixol[MAX_UINSN_BYTES];
+	};
+	struct arch_probe_insn api;
+	bool simulate;
+};
+
+#endif
arch/arm64/kernel/probes/Makefile +2 -0
index ce06312e3d34..89b6df613dde 100644
@@ -1,3 +1,5 @@
 obj-$(CONFIG_KPROBES)		+= kprobes.o decode-insn.o	\
 				   kprobes_trampoline.o		\
 				   simulate-insn.o
+obj-$(CONFIG_UPROBES)		+= uprobes.o decode-insn.o	\
+				   simulate-insn.o
arch/arm64/kernel/probes/uprobes.c new file +216 -0

216 lines not on this page · raw message

arch/arm64/kernel/signal.c +3 -0
index 404dd67080b9..c7b6de62f9d3 100644
@@ -414,6 +414,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs,
 		} else {
 			local_irq_enable();
 
+			if (thread_flags & _TIF_UPROBE)
+				uprobe_notify_resume(regs);
+
 			if (thread_flags & _TIF_SIGPENDING)
 				do_signal(regs);
 
arch/arm64/mm/flush.c +1 -1
index 8377329d8c97..2d78d5a9b89f 100644
@@ -32,7 +32,7 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 		__flush_icache_all();
 }
 
-static void sync_icache_aliases(void *kaddr, unsigned long len)
+void sync_icache_aliases(void *kaddr, unsigned long len)
 {
 	unsigned long addr = (unsigned long)kaddr;
 
Signature · 1 line
2.7.4
maintainer Applied
#9 lore raw
In reply to Pratyush Anand
Quoted 7 lines · Pratyush Anand

Pratyush Anand (6):
arm64: kprobe: protect/rename few definitions to be reused by uprobe
arm64: kgdb_step_brk_fn: ignore other's exception
arm64: Handle TRAP_TRACE for user mode as well
arm64: Handle TRAP_BRKPT for user mode as well
arm64: introduce mm context flag to keep 32 bit task information
arm64: Add uprobe support

I queued the patches for 4.10. I will push them into -next sometime next week once I do some testing (I'm currently at the LPC).

Thanks.

Signature · 1 line
Catalin
maintainer
#10 lore raw
Quoted 11 lines · Catalin Marinas
Quoted 7 lines · Pratyush Anand

Pratyush Anand (6):
arm64: kprobe: protect/rename few definitions to be reused by uprobe
arm64: kgdb_step_brk_fn: ignore other's exception
arm64: Handle TRAP_TRACE for user mode as well
arm64: Handle TRAP_BRKPT for user mode as well
arm64: introduce mm context flag to keep 32 bit task information
arm64: Add uprobe support

I queued the patches for 4.10. I will push them into -next sometime next week once I do some testing (I'm currently at the LPC).

I spoke too soon. With these patches on top of 4.9-rc3, defconfig together with FTRACE and UPROBE_EVENT enabled I get:

In file included from /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/probes/decode-insn.c:20:0:
/work/Linux/linux-2.6-aarch64/arch/arm64/include/asm/kprobes.h:52:5: error: conflicting types for 'kprobe_fault_handler'

 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
     ^~~~~~~~~~~~~~~~~~~~
In file included from /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/probes/decode-insn.c:17:0:
/work/Linux/linux-2.6-aarch64/include/linux/kprobes.h:398:90: note: previous definition of 'kprobe_fault_handler' was here
 static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
                                                                                          ^                   

/work/Linux/linux-2.6-aarch64/scripts/Makefile.build:290: recipe for target 'arch/arm64/kernel/probes/decode-insn.o' failed

Signature · 1 line
Catalin
#11 lore raw
Quoted 18 lines · Catalin Marinas
Quoted 11 lines · Catalin Marinas
Quoted 7 lines · Pratyush Anand

Pratyush Anand (6):
arm64: kprobe: protect/rename few definitions to be reused by uprobe
arm64: kgdb_step_brk_fn: ignore other's exception
arm64: Handle TRAP_TRACE for user mode as well
arm64: Handle TRAP_BRKPT for user mode as well
arm64: introduce mm context flag to keep 32 bit task information
arm64: Add uprobe support

I queued the patches for 4.10. I will push them into -next sometime next week once I do some testing (I'm currently at the LPC).

I spoke too soon. With these patches on top of 4.9-rc3, defconfig together with FTRACE and UPROBE_EVENT enabled I get:

In file included from /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/probes/decode-insn.c:20:0:
/work/Linux/linux-2.6-aarch64/arch/arm64/include/asm/kprobes.h:52:5: error: conflicting types for 'kprobe_fault_handler'

Quoted 8 lines
 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
     ^~~~~~~~~~~~~~~~~~~~
In file included from /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/probes/decode-insn.c:17:0:
/work/Linux/linux-2.6-aarch64/include/linux/kprobes.h:398:90: note: previous definition of 'kprobe_fault_handler' was here
 static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
                                                                                          ^

/work/Linux/linux-2.6-aarch64/scripts/Makefile.build:290: recipe for target 'arch/arm64/kernel/probes/decode-insn.o' failed

Hummmm...CONFIG_KPROBE was defined in my setup and did not notice it :( . We need to remove #include <asm/kprobes.h> from /arch/arm64/kernel/probes/decode-insn.c.
<asm/kprobes.h> is already included from <linux/kprobes.h> under #ifdef CONFIG_KPROBE.

(quoted diff) +0 -0

b/arch/arm64/kernel/probes/decode-insn.c
index 8a29d29..6bf6657 100644

arch/arm64/kernel/probes/decode-insn.c +0 -1
@@ -17,7 +17,6 @@
  #include <linux/kprobes.h>
  #include <linux/module.h>
  #include <linux/kallsyms.h>
-#include <asm/kprobes.h>
  #include <asm/insn.h>
  #include <asm/sections.h>
 

So, do you want me to send V4 or a separate topup fixup patch. Please let me know, will do accordingly.

~Pratyush

maintainer
#12 lore raw
Quoted 46 lines · Pratyush Anand
Quoted 18 lines · Catalin Marinas
Quoted 11 lines · Catalin Marinas
Quoted 7 lines · Pratyush Anand

Pratyush Anand (6):
arm64: kprobe: protect/rename few definitions to be reused by uprobe
arm64: kgdb_step_brk_fn: ignore other's exception
arm64: Handle TRAP_TRACE for user mode as well
arm64: Handle TRAP_BRKPT for user mode as well
arm64: introduce mm context flag to keep 32 bit task information
arm64: Add uprobe support

I queued the patches for 4.10. I will push them into -next sometime next week once I do some testing (I'm currently at the LPC).

I spoke too soon. With these patches on top of 4.9-rc3, defconfig together with FTRACE and UPROBE_EVENT enabled I get:

In file included from /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/probes/decode-insn.c:20:0:
/work/Linux/linux-2.6-aarch64/arch/arm64/include/asm/kprobes.h:52:5: error: conflicting types for 'kprobe_fault_handler'

Quoted 7 lines
 int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
     ^~~~~~~~~~~~~~~~~~~~
In file included from /work/Linux/linux-2.6-aarch64/arch/arm64/kernel/probes/decode-insn.c:17:0:
/work/Linux/linux-2.6-aarch64/include/linux/kprobes.h:398:90: note: previous definition of 'kprobe_fault_handler' was here
 static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
                                                                                          ^

/work/Linux/linux-2.6-aarch64/scripts/Makefile.build:290: recipe for target 'arch/arm64/kernel/probes/decode-insn.o' failed

Hummmm...CONFIG_KPROBE was defined in my setup and did not notice it :( . We need to remove #include <asm/kprobes.h> from /arch/arm64/kernel/probes/decode-insn.c.
<asm/kprobes.h> is already included from <linux/kprobes.h> under #ifdef CONFIG_KPROBE.

arch/arm64/kernel/probes/decode-insn.c +0 -1
index 8a29d29..6bf6657 100644
@@ -17,7 +17,6 @@
 #include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
-#include <asm/kprobes.h>
 #include <asm/insn.h>
 #include <asm/sections.h>
 
Quoted 2 lines

So, do you want me to send V4 or a separate topup fixup patch. Please let me know, will do accordingly.

Just a separate patch on top of your series would do. Also please test your series with CONFIG_KPROBE disabled and I assume this wasn't done (just in case there is an interaction we were not aware of).

Thanks.

Signature · 1 line
Catalin
#13 lore raw
Quoted 13 lines · Catalin Marinas
Quoted 13 lines
(quoted diff) +0 -0
Quoted 12 lines

b/arch/arm64/kernel/probes/decode-insn.c
index 8a29d29..6bf6657 100644

arch/arm64/kernel/probes/decode-insn.c +0 -1
@@ -17,7 +17,6 @@
 #include <linux/kprobes.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
-#include <asm/kprobes.h>
 #include <asm/insn.h>
 #include <asm/sections.h>
 
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines

So, do you want me to send V4 or a separate topup fixup patch. Please let me know, will do accordingly.

Just a separate patch on top of your series would do. Also please test your series with CONFIG_KPROBE disabled and I assume this wasn't done (just in case there is an interaction we were not aware of).

OK, I tested by disabling CONFIG_KPROBE, and uprobe tests worked fine.

~Pratyush