Skip to contentSkip to conversation

update mlx5 release note and guide

PATCH In review Nelio Laranjeiro 4 participants 10 messages Nov 2, 2016 – Nov 7, 2016

lore
Share & tools
lore
#0 lore raw

cover update mlx5 release note and guide

Nelio Laranjeiro (2):
doc: update mlx5 dependencies
doc: add mlx5 release notes

 doc/guides/nics/mlx5.rst               |   8 +-
 doc/guides/rel_notes/release_16_11.rst | 136 ++++++++++++++++++++++++++-------
 2 files changed, 114 insertions(+), 30 deletions(-)
Signature · 1 line
2.1.4
#1 lore raw

PATCH 1/2 doc: update mlx5 dependencies

---
 doc/guides/nics/mlx5.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
doc/guides/nics/mlx5.rst +4 -4
index 0d1fabb..98d1341 100644
@@ -241,12 +241,12 @@ DPDK and must be installed separately:
 
 Currently supported by DPDK:
 
-- Mellanox OFED **3.3-1.0.0.0** and **3.3-2.0.0.0**.
+- Mellanox OFED **3.4-1.0.0.0**.
 
-- Minimum firmware version:
+- firmware version:
 
-  - ConnectX-4: **12.16.1006**
-  - ConnectX-4 Lx: **14.16.1006**
+  - ConnectX-4: **12.17.1010**
+  - ConnectX-4 Lx: **14.17.1010**
 
 Getting Mellanox OFED
 ~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
2.1.4
#3 lore raw

PATCH 2/2 doc: add mlx5 release notes

In reply to Nelio Laranjeiro

Add list of tested and validated NICs too.

---
 doc/guides/rel_notes/release_16_11.rst | 136 ++++++++++++++++++++++++++-------
 1 file changed, 110 insertions(+), 26 deletions(-)
doc/guides/rel_notes/release_16_11.rst +110 -26
index aa0c09a..7447195 100644
@@ -131,6 +131,13 @@ New Features
   The GCC 4.9 ``-march`` option supports the Intel processor code names.
   The config option ``RTE_MACHINE`` can be used to pass code names to the compiler as ``-march`` flag.
 
+* **Updated the mlx5 driver.**
+
+  The following changes were made to mlx5:
+
+  * Add support for RSS hash result
+  * Several performance improvements
+  * Several bug fixes
 
 Resolved Issues
 ---------------
@@ -265,47 +272,124 @@ The libraries prepended with a plus sign were incremented in this version.
 Tested Platforms
 ----------------
 
-.. This section should contain a list of platforms that were tested with this release.
+#. Intel(R) Server board S2600WTT
 
-   The format is:
+   - Processor: Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz
 
-   #. Platform name.
+#. Intel(R) Server
 
-      * Platform details.
-      * Platform details.
+   - Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
 
-   This section is a comment. Make sure to start the actual text at the margin.
+#. Intel(R) Server
+
+   - Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
 
+#. IBM(R) Power8(R)
+
+   - Machine type-model: 8247-22L
+   - Firmware FW810.21 (SV810_108)
+   - Processor: POWER8E (raw), AltiVec supported
 
 Tested NICs
 -----------
 
-.. This section should contain a list of NICs that were tested with this release.
+#. Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
 
-   The format is:
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
 
-   #. NIC name.
+#. Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
 
-      * NIC details.
-      * NIC details.
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
 
-   This section is a comment. Make sure to start the actual text at the margin.
+#. Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
 
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
 
-Tested OSes
------------
+#. Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
 
-.. This section should contain a list of OSes that were tested with this release.
-   The format is as follows, in alphabetical order:
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
 
-   * CentOS 7.0
-   * Fedora 23
-   * Fedora 24
-   * FreeBSD 10.3
-   * Red Hat Enterprise Linux 7.2
-   * SUSE Enterprise Linux 12
-   * Ubuntu 15.10
-   * Ubuntu 16.04 LTS
-   * Wind River Linux 8
+#. Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
 
-   This section is a comment. Make sure to start the actual text at the margin.
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1015
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 14.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1015
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 14.17.1010
+
+Tested OSes
+-----------
+
+   * Red Hat Enterprise Linux Server release 6.7 (Santiago)
+   * Red Hat Enterprise Linux Server release 7.0 (Maipo)
+   * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+   * Wind River Linux 6.0.0.26
+   * Ubuntu 14.04
+   * Ubuntu 15.04
Signature · 1 line
2.1.4
Acked-by on the v1 series
#8 lore raw
In reply to Nelio Laranjeiro
Quoted 10 lines · Nelio Laranjeiro

Nelio Laranjeiro (2):
doc: update mlx5 dependencies
doc: add mlx5 release notes

 doc/guides/nics/mlx5.rst               |   8 +-
 doc/guides/rel_notes/release_16_11.rst | 136 ++++++++++++++++++++++++++-------
 2 files changed, 114 insertions(+), 30 deletions(-)
Signature · 1 line
2.1.4
Signature · 2 lines
Adrien Mazarguil
6WIND
#4 lore raw

Re: [PATCH 2/2] doc: add mlx5 release notes

In reply to Nelio Laranjeiro

Review

Quoted 10 lines

-----Original Message-----
From: dev [mailto:[email protected]] On Behalf Of Nelio Laranjeiro
Sent: Wednesday, November 2, 2016 1:47 PM
To: [email protected]
Subject: [dpdk-dev] [PATCH 2/2] doc: add mlx5 release notes

...

(quoted diff) +1 -1
-   This section is a comment. Make sure to start the actual text at the margin.
+#. Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)

Release note patches shouldn't remove or overwrite the comments sections.

#5 lore raw

Re: [PATCH 2/2] doc: add mlx5 release notes

Quoted 6 lines · John
Quoted 6 lines

-----Original Message-----
From: dev [mailto:[email protected]] On Behalf Of Nelio Laranjeiro
Sent: Wednesday, November 2, 2016 1:47 PM
To: [email protected]
Subject: [dpdk-dev] [PATCH 2/2] doc: add mlx5 release notes

Quoted 6 lines

Review

Quoted 4 lines

...

(quoted diff) +1 -1
-   This section is a comment. Make sure to start the actual text at the margin.
+#. Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)

Release note patches shouldn't remove or overwrite the comments sections.

Ok, I will re-send a v2.

Thanks.

Signature · 2 lines
Nélio Laranjeiro
6WIND
#6 lore raw

PATCH v2 1/1 doc: add mlx5 release notes

In reply to Nelio Laranjeiro

Add list of tested and validated NICs too.

---
 doc/guides/rel_notes/release_16_11.rst | 122 +++++++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)
doc/guides/rel_notes/release_16_11.rst +122 -0
index aa0c09a..e33d454 100644
@@ -131,6 +131,13 @@ New Features
   The GCC 4.9 ``-march`` option supports the Intel processor code names.
   The config option ``RTE_MACHINE`` can be used to pass code names to the compiler as ``-march`` flag.
 
+* **Updated the mlx5 driver.**
+
+  The following changes were made to mlx5:
+
+  * Add support for RSS hash result
+  * Several performance improvements
+  * Several bug fixes
 
 Resolved Issues
 ---------------
@@ -277,6 +284,24 @@ Tested Platforms
    This section is a comment. Make sure to start the actual text at the margin.
 
 
+#. Intel(R) Server board S2600WTT
+
+   - Processor: Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz
+
+#. Intel(R) Server
+
+   - Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+
+#. Intel(R) Server
+
+   - Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
+
+#. IBM(R) Power8(R)
+
+   - Machine type-model: 8247-22L
+   - Firmware FW810.21 (SV810_108)
+   - Processor: POWER8E (raw), AltiVec supported
+
 Tested NICs
 -----------
 
@@ -291,6 +316,96 @@ Tested NICs
 
    This section is a comment. Make sure to start the actual text at the margin.
 
+#. Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+   * Host interface: PCI Express 3.0 x16
+   * Device ID: 15b3:1013
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 12.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1015
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 14.17.1010
+
+#. Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+   * Host interface: PCI Express 3.0 x8
+   * Device ID: 15b3:1015
+   * MLNX_OFED: 3.4-1.0.0.0
+   * Firmware version: 14.17.1010
 
 Tested OSes
 -----------
@@ -309,3 +424,10 @@ Tested OSes
    * Wind River Linux 8
 
    This section is a comment. Make sure to start the actual text at the margin.
+
+* Red Hat Enterprise Linux Server release 6.7 (Santiago)
+* Red Hat Enterprise Linux Server release 7.0 (Maipo)
+* Red Hat Enterprise Linux Server release 7.2 (Maipo)
+* Wind River Linux 6.0.0.26
+* Ubuntu 14.04
+* Ubuntu 15.04
Signature · 1 line
2.1.4
Acked-by on v2 1/1
#7 lore raw

Re: [PATCH v2] doc: add mlx5 release notes

Quoted 11 lines

-----Original Message-----
From: Nelio Laranjeiro [mailto:[email protected]]
Sent: Thursday, November 3, 2016 1:46 PM
To: [email protected]
Cc: Mcnamara, John <[email protected]>; Adrien Mazarguil <[email protected]>
Subject: [PATCH v2] doc: add mlx5 release notes

Add list of tested and validated NICs too.

Hi Nelio,

Nice to see such an extensive list of tested platforms and NICs.

I don't know if it is generally okay to update only part of a patchset but apart from that: