systemd-boot: Completely replaces gummiboot with systemd-boot

index bd2613c..1d5d0c3 100644
@@ -13,7 +13,7 @@ def get_rootfs_uuid(d):
     bb.fatal('Could not determine filesystem UUID of %s' % rootfs)
 
 # Replace the special <<uuid-of-rootfs>> inside a string (like the
-# root= APPEND string in a syslinux.cfg or gummiboot entry) with the
+# root= APPEND string in a syslinux.cfg or systemd-boot entry) with the
 # actual UUID of the rootfs. Does nothing if the special string
 # is not used.
 def replace_rootfs_uuid(d, string):

index 05244c7..3398218 100644
@@ -4,9 +4,7 @@
 
 # systemd-boot.bbclass - The "systemd-boot" is essentially the gummiboot merged into systemd.
 #                        The original standalone gummiboot project is dead without any more
-#                        maintenance. As a start point, we replace all gummitboot occurrences
-#                        with systemd-boot in gummiboot.bbclass to have a base version of this
-#                        systemd-boot.bbclass.
+#                        maintenance.
 #
 # Set EFI_PROVIDER = "systemd-boot" to use systemd-boot on your live images instead of grub-efi
 # (images built by image-live.bbclass or image-vm.bbclass)

index 10efb09..9c82854 100644
@@ -135,7 +135,7 @@ DISTRO_PN_ALIAS_pn-gtk-doc = "Fedora=gtk-doc Ubuntu=gtk-doc"
 DISTRO_PN_ALIAS_pn-gtk-engines = "Fedora=gtk2-engines OpenSuSE=gtk2-engines Ubuntu=gtk2-engines Mandriva=gtk-engines2 Debian=gtk2-engines"
 DISTRO_PN_ALIAS_pn-gtk-sato-engine = "OpenedHand"
 DISTRO_PN_ALIAS_pn-gtk-icon-utils-native = "OSPDT"
-DISTRO_PN_ALIAS_pn-gummiboot = "Debian=gummiboot Fedora=gummiboot"
+DISTRO_PN_ALIAS_pn-systemd-boot = "Ubuntu=systemd-boot Fedora=systemd-boot"
 DISTRO_PN_ALIAS_pn-hello-mod = "OE-Core"
 DISTRO_PN_ALIAS_pn-hostap-conf = "OE-Core"
 DISTRO_PN_ALIAS_pn-hwlatdetect = "OSPDT"

index 9ce3bf8..7fcbb6d 100644
@@ -159,10 +159,10 @@ class MasterImageHardwareTarget(oeqa.targetcontrol.BaseTarget, metaclass=ABCMeta
         self.power_cycle(self.connection)
 
 
-class GummibootTarget(MasterImageHardwareTarget):
+class SystemdbootTarget(MasterImageHardwareTarget):
 
     def __init__(self, d):
-        super(GummibootTarget, self).__init__(d)
+        super(SystemdbootTarget, self).__init__(d)
         # this the value we need to set in the LoaderEntryOneShot EFI variable
         # so the system boots the 'test' bootloader label and not the default
         # The first four bytes are EFI bits, and the rest is an utf-16le string

index faac11e..61081cc 100644
@@ -243,9 +243,9 @@ class Wic(oeSelfTest):
         self.assertEqual(1, len(glob(self.resultdir + "%s-*direct" % image)))
 
     @testcase(1349)
-    def test_mkgummidisk(self):
-        """Test creation of mkgummidisk image"""
-        image = "mkgummidisk"
+    def test_systemd-bootdisk(self):
+        """Test creation of systemd-bootdisk image"""
+        image = "systemd-bootdisk"
         self.assertEqual(0, runCmd("wic create %s -e core-image-minimal" \
                                    % image).status)
         self.assertEqual(1, len(glob(self.resultdir + "%s-*direct" % image)))

index 7036664..602052c 100644
@@ -15,7 +15,7 @@ EXTRA_OECONF = " --enable-gnuefi \
                  --disable-manpages \
                "
 
-# Imported from gummiboot recipe
+# Imported from the old gummiboot recipe
 TUNE_CCARGS_remove = "-mfpmath=sse"
 COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
 

index b562109..9c4b263 100644
@@ -171,19 +171,19 @@ if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
 fi
 
 if [ -d /run/media/$1/loader ]; then
-    GUMMIBOOT_CFGS="/ssd/loader/entries/*.conf"
-    # copy config files for gummiboot
+    SYSTEMDBOOT_CFGS="/ssd/loader/entries/*.conf"
+    # copy config files for systemd-boot
     cp -dr /run/media/$1/loader /ssd
     # delete the install entry
     rm -f /ssd/loader/entries/install.conf
     # delete the initrd lines
-    sed -i "/initrd /d" $GUMMIBOOT_CFGS
+    sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
     # delete any LABEL= strings
-    sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
+    sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
     # delete any root= strings
-    sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
+    sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
     # add the root= and other standard boot options
-    sed -i "s@options *@options root=$rootfs rw $rootwait quiet @" $GUMMIBOOT_CFGS
+    sed -i "s@options *@options root=$rootfs rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
     # Add the test label
     echo -ne "title test\nlinux /test-kernel\noptions root=$testfs rw $rootwait quiet\n" > /ssd/loader/entries/test.conf
 fi

index ffb709c..5ad3a60 100644
@@ -245,19 +245,19 @@ fi
 
 if [ -d /run/media/$1/loader ]; then
     rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
-    GUMMIBOOT_CFGS="/boot/loader/entries/*.conf"
-    # copy config files for gummiboot
+    SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
+    # copy config files for systemd-boot
     cp -dr /run/media/$1/loader /boot
     # delete the install entry
     rm -f /boot/loader/entries/install.conf
     # delete the initrd lines
-    sed -i "/initrd /d" $GUMMIBOOT_CFGS
+    sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
     # delete any LABEL= strings
-    sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
+    sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
     # delete any root= strings
-    sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
+    sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
     # add the root= and other standard boot options
-    sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $GUMMIBOOT_CFGS
+    sed -i "s@options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
 fi
 
 umount /tgt_root

index a175895..800733f 100755
@@ -384,7 +384,7 @@ EFIDIR="$BOOTFS_MNT/EFI/BOOT"
 cp $HDDIMG_MNT/vmlinuz $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy vmlinuz"
 # Copy the efi loader and configs (booti*.efi and grub.cfg if it exists)
 cp -r $HDDIMG_MNT/EFI $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy EFI dir"
-# Silently ignore a missing gummiboot loader dir (we might just be a GRUB image)
+# Silently ignore a missing systemd-boot loader dir (we might just be a GRUB image)
 cp -r $HDDIMG_MNT/loader $BOOTFS_MNT >$OUT 2>&1
 
 # Update the boot loaders configurations for an installed image

@@ -410,25 +410,25 @@ if [ -e "$GRUB_CFG" ]; then
 	sed -i "s@vmlinuz @vmlinuz root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GRUB_CFG
 fi
 
-# Look for a gummiboot installation
-GUMMI_ENTRIES="$BOOTFS_MNT/loader/entries"
-GUMMI_CFG="$GUMMI_ENTRIES/boot.conf"
-if [ -d "$GUMMI_ENTRIES" ]; then
-	info "Configuring Gummiboot"
+# Look for a systemd-boot installation
+SYSTEMD_BOOT_ENTRIES="$BOOTFS_MNT/loader/entries"
+SYSTEMD_BOOT_CFG="$SYSTEMD_BOOT_ENTRIES/boot.conf"
+if [ -d "$SYSTEMD_BOOT_ENTRIES" ]; then
+	info "Configuring SystemD-boot"
 	# remove the install target if it exists
-	rm $GUMMI_ENTRIES/install.conf >$OUT 2>&1
+	rm $SYSTEMD_BOOT_ENTRIES/install.conf >$OUT 2>&1
 
-	if [ ! -e "$GUMMI_CFG" ]; then
-		echo "ERROR: $GUMMI_CFG not found"
+	if [ ! -e "$SYSTEMD_BOOT_CFG" ]; then
+		echo "ERROR: $SYSTEMD_BOOT_CFG not found"
 	fi
 
-	sed -i "/initrd /d" $GUMMI_CFG
-	sed -i "s@ root=[^ ]*@ @" $GUMMI_CFG
-	sed -i "s@options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GUMMI_CFG
+	sed -i "/initrd /d" $SYSTEMD_BOOT_CFG
+	sed -i "s@ root=[^ ]*@ @" $SYSTEMD_BOOT_CFG
+	sed -i "s@options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $SYSTEMD_BOOT_CFG
 fi
 
 # Ensure we have at least one EFI bootloader configured
-if [ ! -e $GRUB_CFG ] && [ ! -e $GUMMI_CFG ]; then
+if [ ! -e $GRUB_CFG ] && [ ! -e $SYSTEMD_BOOT_CFG ]; then
 	die "No EFI bootloader configuration found"
 fi
 

index 4adb80b..305e910 100644
@@ -36,7 +36,7 @@ from wic.utils.oe.misc import exec_cmd, exec_native_cmd, get_bitbake_var, \
 class BootimgEFIPlugin(SourcePlugin):
     """
     Create EFI boot partition.
-    This plugin supports GRUB 2 and gummiboot bootloaders.
+    This plugin supports GRUB 2 and systemd-boot bootloaders.
     """
 
     name = 'bootimg-efi'

@@ -82,7 +82,7 @@ class BootimgEFIPlugin(SourcePlugin):
         cfg.close()
 
     @classmethod
-    def do_configure_gummiboot(cls, hdddir, creator, cr_workdir):
+    def do_configure_systemdboot(cls, hdddir, creator, cr_workdir):
         """
         Create loader-specific systemd-boot/gummiboot config
         """

@@ -98,7 +98,7 @@ class BootimgEFIPlugin(SourcePlugin):
         loader_conf += "default boot\n"
         loader_conf += "timeout %d\n" % bootloader.timeout
 
-        msger.debug("Writing gummiboot config %s/hdd/boot/loader/loader.conf" \
+        msger.debug("Writing systemd-boot config %s/hdd/boot/loader/loader.conf" \
                         % cr_workdir)
         cfg = open("%s/hdd/boot/loader/loader.conf" % cr_workdir, "w")
         cfg.write(loader_conf)

@@ -109,16 +109,16 @@ class BootimgEFIPlugin(SourcePlugin):
         if configfile:
             custom_cfg = get_custom_config(configfile)
             if custom_cfg:
-                # Use a custom configuration for gummiboot
+                # Use a custom configuration for systemd-boot
                 boot_conf = custom_cfg
                 msger.debug("Using custom configuration file "
-                        "%s for gummiboots's boot.conf" % configfile)
+                        "%s for systemd-boots's boot.conf" % configfile)
             else:
                 msger.error("configfile is specified but failed to "
                         "get it from %s." % configfile)
 
         if not custom_cfg:
-            # Create gummiboot configuration using parameters from wks file
+            # Create systemd-boot configuration using parameters from wks file
             kernel = "/bzImage"
 
             boot_conf = ""

@@ -127,7 +127,7 @@ class BootimgEFIPlugin(SourcePlugin):
             boot_conf += "options LABEL=Boot root=%s %s\n" % \
                              (creator.rootdev, bootloader.append)
 
-        msger.debug("Writing gummiboot config %s/hdd/boot/loader/entries/boot.conf" \
+        msger.debug("Writing systemd-boot config %s/hdd/boot/loader/entries/boot.conf" \
                         % cr_workdir)
         cfg = open("%s/hdd/boot/loader/entries/boot.conf" % cr_workdir, "w")
         cfg.write(boot_conf)

@@ -149,9 +149,8 @@ class BootimgEFIPlugin(SourcePlugin):
         try:
             if source_params['loader'] == 'grub-efi':
                 cls.do_configure_grubefi(hdddir, creator, cr_workdir)
-            elif source_params['loader'] == 'gummiboot' \
-                 or source_params['loader'] == 'systemd-boot':
-                cls.do_configure_gummiboot(hdddir, creator, cr_workdir)
+            elif source_params['loader'] == 'systemd-boot':
+                cls.do_configure_systemdboot(hdddir, creator, cr_workdir)
             else:
                 msger.error("unrecognized bootimg-efi loader: %s" % source_params['loader'])
         except KeyError:

@@ -190,8 +189,7 @@ class BootimgEFIPlugin(SourcePlugin):
                 exec_cmd(cp_cmd, True)
                 shutil.move("%s/grub.cfg" % cr_workdir,
                             "%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
-            elif source_params['loader'] == 'gummiboot' \
-                 or source_params['loader'] == 'systemd-boot':
+            elif source_params['loader'] == 'systemd-boot':
                 cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
                 exec_cmd(cp_cmd, True)
             else:

deleted file mode 100644
index 4f2dea6..0000000
@@ -1,121 +0,0 @@
-# Copyright (C) 2014 Intel Corporation
-#
-# Released under the MIT license (see COPYING.MIT)
-
-# gummiboot.bbclass - equivalent of grub-efi.bbclass
-# Set EFI_PROVIDER = "gummiboot" to use gummiboot on your live images instead of grub-efi
-# (images built by image-live.bbclass or image-vm.bbclass)
-
-do_bootimg[depends] += "${MLPREFIX}gummiboot:do_deploy"
-do_bootdirectdisk[depends] += "${MLPREFIX}gummiboot:do_deploy"
-
-EFIDIR = "/EFI/BOOT"
-
-GUMMIBOOT_CFG ?= "${S}/loader.conf"
-GUMMIBOOT_ENTRIES ?= ""
-GUMMIBOOT_TIMEOUT ?= "10"
-
-# Need UUID utility code.
-inherit fs-uuid
-
-efi_populate() {
-        DEST=$1
-
-        EFI_IMAGE="gummibootia32.efi"
-        DEST_EFI_IMAGE="bootia32.efi"
-        if [ "${TARGET_ARCH}" = "x86_64" ]; then
-            EFI_IMAGE="gummibootx64.efi"
-            DEST_EFI_IMAGE="bootx64.efi"
-        fi
-
-        install -d ${DEST}${EFIDIR}
-        # gummiboot requires these paths for configuration files
-        # they are not customizable so no point in new vars
-        install -d ${DEST}/loader
-        install -d ${DEST}/loader/entries
-        install -m 0644 ${DEPLOY_DIR_IMAGE}/${EFI_IMAGE} ${DEST}${EFIDIR}/${DEST_EFI_IMAGE}
-        EFIPATH=$(echo "${EFIDIR}" | sed 's/\//\\/g')
-        printf 'fs0:%s\%s\n' "$EFIPATH" "$DEST_EFI_IMAGE" >${DEST}/startup.nsh
-        install -m 0644 ${GUMMIBOOT_CFG} ${DEST}/loader/loader.conf
-        for i in ${GUMMIBOOT_ENTRIES}; do
-            install -m 0644 ${i} ${DEST}/loader/entries
-        done
-}
-
-efi_iso_populate() {
-        iso_dir=$1
-        efi_populate $iso_dir
-        mkdir -p ${EFIIMGDIR}/${EFIDIR}
-        cp $iso_dir/${EFIDIR}/* ${EFIIMGDIR}${EFIDIR}
-        cp $iso_dir/vmlinuz ${EFIIMGDIR}
-        EFIPATH=$(echo "${EFIDIR}" | sed 's/\//\\/g')
-        echo "fs0:${EFIPATH}\\${DEST_EFI_IMAGE}" > ${EFIIMGDIR}/startup.nsh
-        if [ -f "$iso_dir/initrd" ] ; then
-            cp $iso_dir/initrd ${EFIIMGDIR}
-        fi
-}
-
-efi_hddimg_populate() {
-        efi_populate $1
-}
-
-python build_efi_cfg() {
-    s = d.getVar("S", True)
-    labels = d.getVar('LABELS', True)
-    if not labels:
-        bb.debug(1, "LABELS not defined, nothing to do")
-        return
-
-    if labels == []:
-        bb.debug(1, "No labels, nothing to do")
-        return
-
-    cfile = d.getVar('GUMMIBOOT_CFG', True)
-    try:
-         cfgfile = open(cfile, 'w')
-    except OSError:
-        bb.fatal('Unable to open %s' % cfile)
-
-    cfgfile.write('# Automatically created by OE\n')
-    cfgfile.write('default %s\n' % (labels.split()[0]))
-    timeout = d.getVar('GUMMIBOOT_TIMEOUT', True)
-    if timeout:
-        cfgfile.write('timeout %s\n' % timeout)
-    else:
-        cfgfile.write('timeout 10\n')
-    cfgfile.close()
-
-    for label in labels.split():
-        localdata = d.createCopy()
-
-        overrides = localdata.getVar('OVERRIDES', True)
-        if not overrides:
-            bb.fatal('OVERRIDES not defined')
-
-        entryfile = "%s/%s.conf" % (s, label)
-        d.appendVar("GUMMIBOOT_ENTRIES", " " + entryfile)
-        try:
-            entrycfg = open(entryfile, "w")
-        except OSError:
-            bb.fatal('Unable to open %s' % entryfile)
-        localdata.setVar('OVERRIDES', label + ':' + overrides)
-        bb.data.update_data(localdata)
-
-        entrycfg.write('title %s\n' % label)
-        entrycfg.write('linux /vmlinuz\n')
-
-        append = localdata.getVar('APPEND', True)
-        initrd = localdata.getVar('INITRD', True)
-
-        if initrd:
-            entrycfg.write('initrd /initrd\n')
-        lb = label
-        if label == "install":
-            lb = "install-efi"
-        entrycfg.write('options LABEL=%s ' % lb)
-        if append:
-            append = replace_rootfs_uuid(d, append)
-            entrycfg.write('%s' % append)
-        entrycfg.write('\n')
-        entrycfg.close()
-}

74 lines not on this page · raw message

45 lines not on this page · raw message

deleted file mode 100644
index c684b83..0000000
@@ -1,39 +0,0 @@
-SUMMARY = "Gummiboot is a simple UEFI boot manager which executes configured EFI images."
-HOMEPAGE = "http://freedesktop.org/wiki/Software/gummiboot"
-
-LICENSE = "LGPLv2.1"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=4fbd65380cdd255951079008b364516c"
-
-DEPENDS = "gnu-efi util-linux"
-
-inherit autotools pkgconfig manpages
-inherit deploy
-
-PV = "48+git${SRCPV}"
-SRCREV = "2bcd919c681c952eb867ef1bdb458f1bc49c2d55"
-SRC_URI = "git://anongit.freedesktop.org/gummiboot \
-           file://fix-objcopy.patch \
-           file://0001-console-Fix-C-syntax-errors-for-function-declaration.patch \
-          "
-
-PACKAGECONFIG[manpages] = "--enable-manpages, --disable-manpages, libxslt-native xmlto-native"
-
-# Note: Add COMPATIBLE_HOST here is only because it depends on gnu-efi
-# which has set the COMPATIBLE_HOST, the gummiboot itself may work on
-# more hosts.
-COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
-
-S = "${WORKDIR}/git"
-
-EXTRA_OECONF = "--with-efi-includedir=${STAGING_INCDIR} \
-                --with-efi-ldsdir=${STAGING_LIBDIR} \
-                --with-efi-libdir=${STAGING_LIBDIR}"
-
-EXTRA_OEMAKE += "gummibootlibdir=${libdir}/gummiboot"
-
-TUNE_CCARGS_remove = "-mfpmath=sse"
-
-do_deploy () {
-        install ${B}/gummiboot*.efi ${DEPLOYDIR}
-}
-addtask deploy before do_build after do_compile

deleted file mode 100644
index f3ae090..0000000
@@ -1,11 +0,0 @@
-# short-description: Create an EFI disk image
-# long-description: Creates a partitioned EFI disk image that the user
-# can directly dd to boot media.
-
-part /boot --source bootimg-efi --sourceparams="loader=gummiboot" --ondisk sda --label msdos --active --align 1024
-
-part / --source rootfs --ondisk sda --fstype=ext4 --label platform --align 1024
-
-part swap --ondisk sda --size 44 --label swap1 --fstype=swap
-
-bootloader --ptable gpt --timeout=5  --append="rootwait rootfstype=ext4 console=ttyS0,115200 console=tty0"