Documentation: iio: Fix KernelVersion lines in counter sysfs ABI documentation
cover Documentation: iio: Fix KernelVersion lines in counter sysfs ABI documentation
The IIO counter driver support did not appear in the 4.9 version of the Linux kernel. The sysfs ABI documentation merged had incorrectly anticipated a version 4.9 release. However, the relevant patches ended up in the 4.10 merge instead. This patchset fixes the KernelVersion lines of the relevant IIO counter and 104-QUAD-8 IIO driver sysfs ABI documentation.
William Breathitt Gray (2):
Documentation: iio: Fix KernelVersion in counter sysfs ABI
documentation
Documentation: iio: 104-quad-8: Fix KernelVersion in sysfs ABI
documentation
Documentation/ABI/testing/sysfs-bus-iio | 4 ++-- .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 18 +++++++++--------- 2 files changed, 11 insertions(+), 11 deletions(-)
Signature · 1 line
2.11.1
PATCH 1/2 Documentation: iio: Fix KernelVersion in counter sysfs ABI documentation
The IIO counter driver support did not appear in the 4.9 version of the Linux kernel. This patch fixes the KernelVersion lines of the relevant IIO counter sysfs ABI documentation.
--- Documentation/ABI/testing/sysfs-bus-iio | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/ABI/testing/sysfs-bus-iio +2 -2
@@ -1593,7 +1593,7 @@ Description: can be processed to siemens per meter. What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Raw counter device counts from channel Y. For quadrature
@@ -1601,7 +1601,7 @@ Description: the counts of a single quadrature signal phase from channel Y. What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Raw counter device index value from channel Y. This attribute
Signature · 1 line
2.11.1
PATCH 2/2 Documentation: iio: 104-quad-8: Fix KernelVersion in sysfs ABI documentation
In reply to William Breathitt GrayThe ACCES 104-QUAD-8 IIO driver did not appear in the 4.9 version of the Linux kernel. This patch fixes the KernelVersion lines of the 104-QUAD-8 sysfs ABI documentation.
--- .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 +9 -9
@@ -4,21 +4,21 @@ What: /sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available What: /sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Discrete set of available values for the respective counter configuration are listed in this file. What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Read-only attribute that indicates whether the counter for channel Y is counting up or down. What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Count mode for channel Y. Four count modes are available:
@@ -52,7 +52,7 @@ Description: continuously throughout. What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Read-only attribute that indicates whether excessive noise is
@@ -60,14 +60,14 @@ Description: irrelevant in non-quadrature clock mode. What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: If the counter device supports preset registers, the preset count for channel Y is provided by this attribute. What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Configure channel Y counter for non-quadrature or quadrature
@@ -88,7 +88,7 @@ Description: decoded for UP/DN clock. What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Whether to set channel Y counter with channel Y preset value
@@ -96,14 +96,14 @@ Description: Valid attribute values are boolean. What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Active level of channel Y index input; irrelevant in non-synchronous load mode. What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode -KernelVersion: 4.9 +KernelVersion: 4.10 Contact: [email protected] Description: Configure channel Y counter for non-synchronous or synchronous
Signature · 1 line
2.11.1
Jonathan Cameron
maintainerQuoted 13 lines · William Breathitt Gray
The IIO counter driver support did not appear in the 4.9 version of the Linux kernel. The sysfs ABI documentation merged had incorrectly anticipated a version 4.9 release. However, the relevant patches ended up in the 4.10 merge instead. This patchset fixes the KernelVersion lines of the relevant IIO counter and 104-QUAD-8 IIO driver sysfs ABI documentation.
William Breathitt Gray (2):
Documentation: iio: Fix KernelVersion in counter sysfs ABI
documentation
Documentation: iio: 104-quad-8: Fix KernelVersion in sysfs ABI
documentation
Quoted 4 lines
Documentation/ABI/testing/sysfs-bus-iio | 4 ++-- .../ABI/testing/sysfs-bus-iio-counter-104-quad-8 | 18 +++++++++--------- 2 files changed, 11 insertions(+), 11 deletions(-)
Not in the super important category, but why not have it correct I guess ;)
Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to completely ignore.
Jonathan