Teach lirc how to send and receive scancodes
Subsystems (9)
Sean Young
maintainerv3 cover Teach lirc how to send and receive scancodes
This patch series has some general cleanup work, then the lirc scancode interface (v3) and lirc documentation fixes. The cleanups are needed for the new scancode interface.
lirc already supports LIRC_MODE_LIRCCODE, but that mode is entirely driver dependant and makes no provision for protocol information.
Receiving LIRC_MODE_SCANCODE
----------------------------
If a lirc device has the LIRC_CAN_REC_SCANCODE feature, LIRC_MODE_SCANCODE can be set set using LIRC_SET_REC_MODE ioctl. Now when you read from the device you receive struct lirc_scancode. In this structure you have the scancode, rc_type, and flags. RC_TYPE_* is now in uapi, so now you can see exactly which protocol variant was used. flags might contain LIRC_SCANCODE_FLAGS_TOGGLE (rc5, rc6) or LIRC_SCANCODE_FLAGS_REPEAT (nec).
Using this interface, you can see what IR protocol a remote is using. This was not easy to do before.
Sending LIRC_MODE_SCANCODE
--------------------------
If a lirc device has the LIRC_CAN_SEND_SCANCODE features, LIRC_MODE_SCANCODE can be set using the LIRC_SET_SEND_MODE ioctl. Now you can write struct lirc_scancode. flags should be 0, rc_type to the RC_TYPE_* and the scancode must be set. You can only tranmsit one lirc_scancode at a time.
This interface uses the in-kernel IR encoders to work. Using this interface it will be possible to port lirc_zilog to rc-core. This device cannot send raw IR, so it will not use the IR encoders but provide the same userspace interface.
Other user-visible changes
--------------------------
Now all RC devices will have a lirc char device, including devices which do not produce raw IR. They will be fixed in mode LIRC_MODE_SCANCODE.
Changes v2 -> v3:
- add timestamp to lirc_scancode struct to record when scancode was decoded in ktime (CLOCK_MONOTONIC)
- Rather than add more members to rc_dev and ir_raw_event_ctrl, now we have all the lirc settings for rc-core in lirc_node
- Various small fixes.
Changes v1 -> v2:
- changed the scancode to 64 bit. There are many IR protocols which encode more than 32 bits; we don't support any at the moment but might as well future-proof it
http://www.hifi-remote.com/wiki/index.php?title=DecodeIR
- Various small fixes.
- Added documentation
Sean Young (19):
[media] lirc: document lirc modes better
[media] lirc: return ENOTTY when ioctl is not supported [media] lirc: return ENOTTY when device does support ioctl [media] winbond: allow timeout to be set
[media] gpio-ir: do not allow a timeout of 0
[media] rc: lirc keymap no longer makes any sense [media] lirc: advertise LIRC_CAN_GET_REC_RESOLUTION and improve [media] mce_kbd: add encoder
[media] serial_ir: iommap is a memory address, not bool [media] lirc: use refcounting for lirc devices [media] lirc: lirc interface should not be a raw decoder [media] lirc: exorcise struct irctl
[media] lirc: use plain kfifo rather than lirc_buffer [media] lirc: implement scancode sending
[media] rc: use the correct carrier for scancode transmit [media] rc: auto load encoder if necessary
[media] lirc: implement reading scancode
[media] lirc: scancode rc devices should have a lirc device too [media] lirc: document LIRC_MODE_SCANCODE
Documentation/media/lirc.h.rst.exceptions | 50 ++- Documentation/media/uapi/rc/lirc-dev-intro.rst | 78 +++- Documentation/media/uapi/rc/lirc-get-features.rst | 28 +- Documentation/media/uapi/rc/lirc-get-length.rst | 3 +- Documentation/media/uapi/rc/lirc-get-rec-mode.rst | 8 +- Documentation/media/uapi/rc/lirc-get-send-mode.rst | 8 +- Documentation/media/uapi/rc/lirc-read.rst | 22 +- .../media/uapi/rc/lirc-set-rec-carrier-range.rst | 2 +- .../media/uapi/rc/lirc-set-rec-timeout-reports.rst | 2 + Documentation/media/uapi/rc/lirc-write.rst | 25 +- drivers/media/rc/Kconfig | 15 +- drivers/media/rc/Makefile | 6 +- drivers/media/rc/gpio-ir-recv.c | 2 +- drivers/media/rc/igorplugusb.c | 2 +- drivers/media/rc/ir-jvc-decoder.c | 1 + drivers/media/rc/ir-lirc-codec.c | 367 ++++++++++++------ drivers/media/rc/ir-mce_kbd-decoder.c | 56 ++- drivers/media/rc/ir-nec-decoder.c | 1 + drivers/media/rc/ir-rc5-decoder.c | 1 + drivers/media/rc/ir-rc6-decoder.c | 1 + drivers/media/rc/ir-sanyo-decoder.c | 1 + drivers/media/rc/ir-sharp-decoder.c | 1 + drivers/media/rc/ir-sony-decoder.c | 1 + drivers/media/rc/keymaps/Makefile | 1 - drivers/media/rc/keymaps/rc-lirc.c | 42 -- drivers/media/rc/lirc_dev.c | 431 +++++++++------------ drivers/media/rc/rc-core-priv.h | 61 ++- drivers/media/rc/rc-ir-raw.c | 55 ++- drivers/media/rc/rc-main.c | 73 ++-- drivers/media/rc/serial_ir.c | 4 +- drivers/media/rc/st_rc.c | 2 +- drivers/media/rc/winbond-cir.c | 4 +- drivers/staging/media/lirc/lirc_sasem.c | 3 +- drivers/staging/media/lirc/lirc_zilog.c | 167 ++++---- include/media/lirc_dev.h | 33 +- include/media/rc-core.h | 3 + include/media/rc-map.h | 109 ++---- include/uapi/linux/lirc.h | 76 ++++ 38 files changed, 1069 insertions(+), 676 deletions(-) delete mode 100644 drivers/media/rc/keymaps/rc-lirc.c
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 1/19 lirc: document lirc modes better
LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE were not covered at all.
--- Documentation/media/lirc.h.rst.exceptions | 1 - Documentation/media/uapi/rc/lirc-dev-intro.rst | 53 +++++++++++++++++++--- Documentation/media/uapi/rc/lirc-get-features.rst | 13 ++++-- Documentation/media/uapi/rc/lirc-get-length.rst | 3 +- Documentation/media/uapi/rc/lirc-get-rec-mode.rst | 4 +- Documentation/media/uapi/rc/lirc-get-send-mode.rst | 7 ++- Documentation/media/uapi/rc/lirc-read.rst | 18 ++++---- .../media/uapi/rc/lirc-set-rec-carrier-range.rst | 2 +- .../media/uapi/rc/lirc-set-rec-timeout-reports.rst | 2 + Documentation/media/uapi/rc/lirc-write.rst | 19 +++++--- 10 files changed, 86 insertions(+), 36 deletions(-)
Documentation/media/lirc.h.rst.exceptions +0 -1
@@ -35,7 +35,6 @@ ignore define PULSE_MASK ignore define LIRC_MODE2_SPACE ignore define LIRC_MODE2_PULSE -ignore define LIRC_MODE2_TIMEOUT ignore define LIRC_VALUE_MASK ignore define LIRC_MODE2_MASK
Documentation/media/uapi/rc/lirc-dev-intro.rst +46 -7
77 lines not on this page · raw message
Documentation/media/uapi/rc/lirc-get-features.rst +8 -5
@@ -48,8 +48,8 @@ LIRC features ``LIRC_CAN_REC_PULSE`` - The driver is capable of receiving using - :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`. + Unused. Kept just to avoid breaking uAPI. + :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` can only be used for transmitting. .. _LIRC-CAN-REC-MODE2:
@@ -156,19 +156,22 @@ LIRC features ``LIRC_CAN_SEND_PULSE`` - The driver supports sending using :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`. + The driver supports sending (also called as IR blasting or IR TX) using + :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`. .. _LIRC-CAN-SEND-MODE2: ``LIRC_CAN_SEND_MODE2`` - The driver supports sending using :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`. + Unused. Kept just to avoid breaking uAPI. + :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` can only be used for receiving. .. _LIRC-CAN-SEND-LIRCCODE: ``LIRC_CAN_SEND_LIRCCODE`` - The driver supports sending codes (also called as IR blasting or IR TX). + The driver supports sending (also called as IR blasting or IR TX) using + :ref:`LIRC_MODE_LIRCCODE <lirc-mode-LIRCCODE>`. Return Value
Documentation/media/uapi/rc/lirc-get-length.rst +2 -1
@@ -30,7 +30,8 @@ Arguments Description =========== -Retrieves the code length in bits (only for ``LIRC-MODE-LIRCCODE``). +Retrieves the code length in bits (only for +:ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>`). Reads on the device must be done in blocks matching the bit count. The bit could should be rounded up so that it matches full bytes.
Documentation/media/uapi/rc/lirc-get-rec-mode.rst +2 -2
@@ -35,8 +35,8 @@ Description Get/set supported receive modes. Only :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` and :ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` are supported for IR -receive. - +receive. Use :ref:`lirc_get_features` to find out which modes the driver +supports. Return Value ============
Documentation/media/uapi/rc/lirc-get-send-mode.rst +5 -2
@@ -34,9 +34,12 @@ Arguments Description =========== -Get/set supported transmit mode. +Get/set current transmit mode. -Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` is supported by for IR send. +Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and +:ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` is supported by for IR send, +depending on the driver. Use :ref:`lirc_get_features` to find out which +modes the driver supports. Return Value ============
Documentation/media/uapi/rc/lirc-read.rst +8 -10
@@ -44,17 +44,15 @@ descriptor ``fd`` into the buffer starting at ``buf``. If ``count`` is zero, :ref:`read() <lirc-read>` returns zero and has no other results. If ``count`` is greater than ``SSIZE_MAX``, the result is unspecified. -The lircd userspace daemon reads raw IR data from the LIRC chardev. The -exact format of the data depends on what modes a driver supports, and -what mode has been selected. lircd obtains supported modes and sets the -active mode via the ioctl interface, detailed at :ref:`lirc_func`. -The generally preferred mode for receive is -:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`, in which packets containing an -int value describing an IR signal are read from the chardev. +The exact format of the data depends on what :ref:`lirc_modes` a driver +supports, and which mode has been selected. Use :ref:`lirc_get_features` to +get a list of supported modes, and :ref:`lirc_get_rec_mode` to get or set the +recording mode if multiple modes are available. -See also -`http://www.lirc.org/html/technical.html <http://www.lirc.org/html/technical.html>`__ -for more info. +The generally preferred mode for receive is +:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`, +in which packets containing an int value describing an IR signal are +read from the chardev. Return Value ============
Documentation/media/uapi/rc/lirc-set-rec-carrier-range.rst +1 -1
@@ -9,7 +9,7 @@ ioctl LIRC_SET_REC_CARRIER_RANGE Name ==== -LIRC_SET_REC_CARRIER_RANGE - Set lower bond of the carrier used to modulate +LIRC_SET_REC_CARRIER_RANGE - Set lower bound of the carrier used to modulate IR receive. Synopsis
Documentation/media/uapi/rc/lirc-set-rec-timeout-reports.rst +2 -0
@@ -31,6 +31,8 @@ Arguments Description =========== +.. _lirc-mode2-timeout: + Enable or disable timeout reports for IR receive. By default, timeout reports should be turned off.
Documentation/media/uapi/rc/lirc-write.rst +12 -7
@@ -42,13 +42,18 @@ Description referenced by the file descriptor ``fd`` from the buffer starting at ``buf``. -The data written to the chardev is a pulse/space sequence of integer -values. Pulses and spaces are only marked implicitly by their position. -The data must start and end with a pulse, therefore, the data must -always include an uneven number of samples. The write function must -block until the data has been transmitted by the hardware. If more data -is provided than the hardware can send, the driver returns ``EINVAL``. - +The exact format of the data depends on what modes a driver supports, +and what mode has been selected. Use :ref:`lirc_get_features` to get a +list of supported modes, and :ref:`lirc_get_send_mode` to get or set +the sending mode if multiple modes are available. + +When in :ref:`LIRC_MODE_PULSE <lirc-mode-PULSE>` mode, the data written to +the chardev is a pulse/space sequence of integer values. Pulses and spaces +are only marked implicitly by their position. The data must start and end +with a pulse, therefore, the data must always include an uneven number of +samples. The write function must block until the data has been transmitted +by the hardware. If more data is provided than the hardware can send, the +driver returns ``EINVAL``. Return Value ============
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 2/19 lirc: return ENOTTY when ioctl is not supported
In reply to Sean YoungWe shouldn't be using ENOSYS when a feature is not available. I've tested lirc; nothing is broken as far as I can make out.
--- drivers/media/rc/ir-lirc-codec.c | 20 ++++++++++---------- drivers/media/rc/lirc_dev.c | 2 +- 2 files changed, 11 insertions(+), 11 deletions(-)
drivers/media/rc/ir-lirc-codec.c +10 -10
@@ -139,7 +139,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, }if (!dev->tx_ir) { - ret = -ENOSYS ; + ret = -EINVAL ; goto out; }
@@ -221,19 +221,19 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,/* TX settings */ case LIRC_SET_TRANSMITTER_MASK :if (!dev->s_tx_mask) -return -ENOSYS ; +return -ENOTTY ;return dev->s_tx_mask (dev, val);case LIRC_SET_SEND_CARRIER :if (!dev->s_tx_carrier) -return -ENOSYS ; +return -ENOTTY ;return dev->s_tx_carrier (dev, val);case LIRC_SET_SEND_DUTY_CYCLE :if (!dev->s_tx_duty_cycle) -return -ENOSYS ; +return -ENOTTY ;if (val <=0 || val >=100 )return -EINVAL ;
@@ -243,7 +243,7 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,/* RX settings */ case LIRC_SET_REC_CARRIER :if (!dev->s_rx_carrier_range) -return -ENOSYS ; +return -ENOTTY ;if (val <=0 )return -EINVAL ;
@@ -265,32 +265,32 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,case LIRC_SET_WIDEBAND_RECEIVER :if (!dev->s_learning_mode) -return -ENOSYS ; +return -ENOTTY ;return dev->s_learning_mode (dev, !!val);case LIRC_SET_MEASURE_CARRIER_MODE :if (!dev->s_carrier_report) -return -ENOSYS ; +return -ENOTTY ;return dev->s_carrier_report (dev, !!val);/* Generic timeout support */ case LIRC_GET_MIN_TIMEOUT :if (!dev->max_timeout) -return -ENOSYS ; +return -ENOTTY ; val =DIV_ROUND_UP (dev->min_timeout,1000 );break ;case LIRC_GET_MAX_TIMEOUT :if (!dev->max_timeout) -return -ENOSYS ; +return -ENOTTY ; val = dev->max_timeout /1000 ;break ;case LIRC_SET_REC_TIMEOUT :if (!dev->max_timeout) -return -ENOSYS ; +return -ENOTTY ; tmp = val *1000 ;
drivers/media/rc/lirc_dev.c +1 -1
@@ -623,7 +623,7 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) result =put_user (ir->d.max_timeout, (__u32 __user *)arg);break ;default : - result = -EINVAL ; + result = -ENOTTY ; }mutex_unlock (&ir->irctl_lock);
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 3/19 lirc: return ENOTTY when device does support ioctl
In reply to Sean YoungIf timeouts or carrier range is not supported, return proper error.
--- drivers/media/rc/ir-lirc-codec.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/media/rc/ir-lirc-codec.c +6 -0
@@ -253,6 +253,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, val);case LIRC_SET_REC_CARRIER_RANGE : +if (!dev->s_rx_carrier_range) +return -ENOTTY ; +if (val <=0 )return -EINVAL ;
@@ -305,6 +308,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,break ;case LIRC_SET_REC_TIMEOUT_REPORTS : +if (!dev->timeout) +return -ENOTTY ; + lirc->send_timeout_reports = !!val;break ;
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 4/19 winbond: allow timeout to be set
In reply to Sean YoungThe drivers sets the hardware to idle when a timeout occurs. This can be any reasonable value.
--- drivers/media/rc/winbond-cir.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/media/rc/winbond-cir.c +3 -1
@@ -1082,7 +1082,9 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) data->dev->tx_ir = wbcir_tx; data->dev->priv = data; data->dev->dev.parent = &device->dev; - data->dev->timeout =MS_TO_NS (100 ); + data->dev->min_timeout =1 ; + data->dev->timeout =IR_DEFAULT_TIMEOUT ; + data->dev->max_timeout =10 *IR_DEFAULT_TIMEOUT ; data->dev->rx_resolution =US_TO_NS (2 ); data->dev->allowed_protocols =RC_BIT_ALL_IR_DECODER ; data->dev->allowed_wakeup_protocols = RC_BIT_NEC | RC_BIT_NECX |
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 5/19 gpio-ir: do not allow a timeout of 0
In reply to Sean YoungAccording to the documentation, a timeout of 0 turns off timeouts, which is not the case.
--- drivers/media/rc/gpio-ir-recv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/rc/gpio-ir-recv.c +1 -1
@@ -158,7 +158,7 @@ static int gpio_ir_recv_probe(struct platform_device *pdev) rcdev->input_id.version =0x0100 ; rcdev->dev.parent = &pdev->dev; rcdev->driver_name =GPIO_IR_DRIVER_NAME ; - rcdev->min_timeout =0 ; + rcdev->min_timeout =1 ; rcdev->timeout =IR_DEFAULT_TIMEOUT ; rcdev->max_timeout =10 *IR_DEFAULT_TIMEOUT ;if (pdata->allowed_protos)
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 6/19 rc: lirc keymap no longer makes any sense
In reply to Sean YoungThe lirc keymap existed once upon a time to select the lirc protocol. Since '275ddb4 [media] rc-core: remove the LIRC "protocol"', IR is always passed to the lirc decoder so this keymap is no longer needed.
--- drivers/media/rc/keymaps/Makefile | 1 - drivers/media/rc/keymaps/rc-lirc.c | 42 -------------------------------------- drivers/media/rc/st_rc.c | 2 +- include/media/rc-map.h | 1 - 4 files changed, 1 insertion(+), 45 deletions(-) delete mode 100644 drivers/media/rc/keymaps/rc-lirc.c
drivers/media/rc/keymaps/Makefile +0 -1
@@ -57,7 +57,6 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \ rc-kworld-pc150u.o \ rc-kworld-plus-tv-analog.o \ rc-leadtek-y04g0051.o \ - rc-lirc.o \ rc-lme2510.o \ rc-manli.o \ rc-medion-x10.o \
drivers/media/rc/keymaps/rc-lirc.c deleted +0 -42
42 lines not on this page · raw message
drivers/media/rc/st_rc.c +1 -1
@@ -298,7 +298,7 @@ static int st_rc_probe(struct platform_device *pdev) rdev->open = st_rc_open; rdev->close = st_rc_close; rdev->driver_name =IR_ST_NAME ; - rdev->map_name =RC_MAP_LIRC ; + rdev->map_name =RC_MAP_EMPTY ; rdev->input_name ="ST Remote Control Receiver" ; ret =rc_register_device (rdev);
include/media/rc-map.h +0 -1
@@ -255,7 +255,6 @@ struct rc_map *rc_map_get(const char *name);#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u"#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog"#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" -#define RC_MAP_LIRC "rc-lirc"#define RC_MAP_LME2510 "rc-lme2510"#define RC_MAP_MANLI "rc-manli"#define RC_MAP_MEDION_X10 "rc-medion-x10"
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 7/19 lirc: advertise LIRC_CAN_GET_REC_RESOLUTION and improve
In reply to Sean YoungThis feature was never set. The ioctl should fail if no resolution is set.
--- drivers/media/rc/ir-lirc-codec.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/media/rc/ir-lirc-codec.c +7 -1
@@ -263,6 +263,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,return 0 ;case LIRC_GET_REC_RESOLUTION : +if (!dev->rx_resolution) +return -ENOTTY ; + val = dev->rx_resolution;break ;
@@ -367,8 +370,11 @@ static int ir_lirc_register(struct rc_dev *dev)if (rc) goto rbuf_init_failed; -if (dev->driver_type !=RC_DRIVER_IR_RAW_TX ) +if (dev->driver_type !=RC_DRIVER_IR_RAW_TX ) { features |=LIRC_CAN_REC_MODE2 ; +if (dev->rx_resolution) + features |=LIRC_CAN_GET_REC_RESOLUTION ; + }if (dev->tx_ir) { features |=LIRC_CAN_SEND_PULSE ;if (dev->s_tx_mask)
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 8/19 mce_kbd: add encoder
In reply to Sean YoungSplit the protocol into two variants, one for keyboard and one for mouse data.
Note that the mce_kbd protocol cannot be used on the igorplugusb, since the IR is too long.
--- drivers/media/rc/igorplugusb.c | 2 +- drivers/media/rc/ir-mce_kbd-decoder.c | 49 +++++++++++++++++++++- drivers/media/rc/rc-core-priv.h | 2 +- drivers/media/rc/rc-ir-raw.c | 6 +-- drivers/media/rc/rc-main.c | 8 +++- include/media/rc-map.h | 78 ++++++++++++++++++----------------- 6 files changed, 99 insertions(+), 46 deletions(-)
drivers/media/rc/igorplugusb.c +1 -1
@@ -205,7 +205,7 @@ static int igorplugusb_probe(struct usb_interface *intf, rc->allowed_protocols =RC_BIT_ALL_IR_DECODER & ~(RC_BIT_NEC |RC_BIT_NECX |RC_BIT_NEC32 |RC_BIT_RC6_6A_20 |RC_BIT_RC6_6A_24 |RC_BIT_RC6_6A_32 |RC_BIT_RC6_MCE | -RC_BIT_SONY20 |RC_BIT_MCE_KBD |RC_BIT_SANYO ); +RC_BIT_SONY20 |RC_BIT_SANYO ); rc->priv = ir; rc->driver_name =DRIVER_NAME ;
drivers/media/rc/ir-mce_kbd-decoder.c +47 -2
69 lines not on this page · raw message
drivers/media/rc/rc-core-priv.h +1 -1
@@ -185,7 +185,7 @@ struct ir_raw_timings_manchester {int ir_raw_gen_manchester (struct ir_raw_event **ev,unsigned int max,const struct ir_raw_timings_manchester *timings, -unsigned int n,unsigned int data); +unsigned int n,u64 data);/** * ir_raw_gen_pulse_space() - generate pulse and space raw events.
drivers/media/rc/rc-ir-raw.c +3 -3
@@ -258,13 +258,13 @@ static void ir_raw_disable_protocols(struct rc_dev *dev, u64 protocols)*/ int ir_raw_gen_manchester (struct ir_raw_event **ev,unsigned int max,const struct ir_raw_timings_manchester *timings, -unsigned int n,unsigned int data) +unsigned int n,u64 data) {bool need_pulse; -unsigned int i; +u64 i;int ret = -ENOBUFS ; - i =1 << (n -1 ); + i =BIT_ULL (n -1 );if (timings->leader) {if (!max--)
drivers/media/rc/rc-main.c +6 -2
@@ -746,6 +746,8 @@ static int rc_validate_filter(struct rc_dev *dev, [RC_TYPE_NECX] = 0xffffff, [RC_TYPE_NEC32] = 0xffffffff, [RC_TYPE_SANYO] = 0x1fffff, + [RC_TYPE_MCIR2_KBD] = 0xffff, + [RC_TYPE_MCIR2_MSE] = 0x1fffff, [RC_TYPE_RC6_0] = 0xffff, [RC_TYPE_RC6_6A_20] = 0xfffff, [RC_TYPE_RC6_6A_24] = 0xffffff,
@@ -878,7 +880,8 @@ static const struct { { RC_BIT_RC5_SZ, "rc-5-sz", "ir-rc5-decoder" }, { RC_BIT_SANYO, "sanyo", "ir-sanyo-decoder" }, { RC_BIT_SHARP, "sharp", "ir-sharp-decoder" }, - { RC_BIT_MCE_KBD, "mce_kbd", "ir-mce_kbd-decoder" }, + { RC_BIT_MCIR2_KBD | + RC_BIT_MCIR2_MSE, "mce_kbd", "ir-mce_kbd-decoder" }, { RC_BIT_XMP, "xmp", "ir-xmp-decoder" }, { RC_BIT_CEC, "cec", NULL }, };
@@ -1346,7 +1349,8 @@ static const char * const proto_variant_names[] = { [RC_TYPE_NECX] = "nec-x", [RC_TYPE_NEC32] = "nec-32", [RC_TYPE_SANYO] = "sanyo", - [RC_TYPE_MCE_KBD] = "mce_kbd", + [RC_TYPE_MCIR2_KBD] = "mcir2-kbd", + [RC_TYPE_MCIR2_MSE] = "mcir2-mse", [RC_TYPE_RC6_0] = "rc-6-0", [RC_TYPE_RC6_6A_20] = "rc-6-6a-20", [RC_TYPE_RC6_6A_24] = "rc-6-6a-24",
include/media/rc-map.h +41 -37
111 lines not on this page · raw message
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 9/19 serial_ir: iommap is a memory address, not bool
In reply to Sean YoungThis has been broken for a long time, so presumably it is not used. I have no hardware to test this on.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=61401
--- drivers/media/rc/serial_ir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/rc/serial_ir.c +2 -2
@@ -56,7 +56,7 @@ struct serial_ir_hw {static int type;static int io;static int irq; -static bool iommap; +static ulong iommap;static int ioshift;static bool softcarrier = true;static bool share_irq;
@@ -836,7 +836,7 @@ module_param(io, int, 0444);MODULE_PARM_DESC (io,"I/O address base (0x3f8 or 0x2f8)" );/* some architectures (e.g. intel xscale) have memory mapped registers */ -module_param (iommap, bool,0444 ); +module_param (iommap, ulong,0444 );MODULE_PARM_DESC (iommap,"physical base for memory mapped I/O (0 = no memory mapped io)" );/*
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 10/19 lirc: use refcounting for lirc devices
In reply to Sean YoungIf a lirc device is unplugged, the struct rc_dev is freed even though userspace can still have a file descriptor open on the lirc chardev. The rc_dev structure can be used in a subsequent, or even currently executing ioctl, read or write.
--- drivers/media/rc/lirc_dev.c | 120 +++++++++++++++++++------------------------- 1 file changed, 51 insertions(+), 69 deletions(-)
drivers/media/rc/lirc_dev.c +51 -69
@@ -54,7 +54,8 @@ struct irctl {struct lirc_buffer *buf;unsigned int chunk_size; -struct cdev *cdev; +struct device dev; +struct cdev cdev;struct task_struct *task;long jiffies_to_wait;
@@ -76,15 +77,21 @@ static void lirc_irctl_init(struct irctl *ir) ir->d.minor =NOPLUG ; } -static void lirc_irctl_cleanup (struct irctl *ir) +static void lirc_release (struct device *ld) { -device_destroy (lirc_class,MKDEV (MAJOR (lirc_base_dev), ir->d.minor)); + struct irctl *ir = container_of(ld, struct irctl, dev); + +put_device (ir->dev.parent);if (ir->buf != ir->d.rbuf) {lirc_buffer_free (ir->buf);kfree (ir->buf); } - ir->buf =NULL ; + +mutex_lock (&lirc_dev_lock); + irctls[ir->d.minor] =NULL ; +mutex_unlock (&lirc_dev_lock); +kfree (ir); }/* helper function
@@ -157,32 +164,21 @@ static int lirc_cdev_add(struct irctl *ir)struct cdev *cdev;int retval; - cdev =cdev_alloc (); -if (!cdev) -return -ENOMEM ; + cdev = &ir->cdev;if (d->fops) { - cdev->ops = d->fops; +cdev_init (cdev, d->fops); cdev->owner = d->owner; }else { - cdev->ops = &lirc_dev_fops; +cdev_init (cdev, &lirc_dev_fops); cdev->owner =THIS_MODULE ; } retval =kobject_set_name (&cdev->kobj,"lirc%d" , d->minor);if (retval) - goto err_out; - - retval =cdev_add (cdev,MKDEV (MAJOR (lirc_base_dev), d->minor),1 ); -if (retval) - goto err_out; - - ir->cdev = cdev; - -return 0 ; +return retval; -err_out: -cdev_del (cdev); -return retval; + cdev->kobj.parent = &ir->dev.kobj; +return cdev_add (cdev, ir->dev.devt,1 ); }static int lirc_allocate_buffer (struct irctl *ir)
@@ -304,9 +300,12 @@ static int lirc_allocate_driver(struct lirc_driver *d) ir->d = *d; -device_create (lirc_class, ir->d.dev, -MKDEV (MAJOR (lirc_base_dev), ir->d.minor),NULL , -"lirc%u" , ir->d.minor); + ir->dev.devt =MKDEV (MAJOR (lirc_base_dev), ir->d.minor); + ir->dev.class = lirc_class; + ir->dev.parent = d->dev; + ir->dev.release = lirc_release; +dev_set_name (&ir->dev,"lirc%d" , ir->d.minor); +device_initialize (&ir->dev);if (d->sample_rate) { ir->jiffies_to_wait =HZ / d->sample_rate;
@@ -329,14 +328,22 @@ static int lirc_allocate_driver(struct lirc_driver *d) goto out_sysfs; ir->attached =1 ; + + err =device_add (&ir->dev); +if (err) + goto out_cdev; +mutex_unlock (&lirc_dev_lock); +get_device (ir->dev.parent); +dev_info (ir->d.dev,"lirc_dev: driver %s registered at minor = %d\n" , ir->d.name, ir->d.minor);return minor; - +out_cdev: +cdev_del (&ir->cdev); out_sysfs: -device_destroy (lirc_class,MKDEV (MAJOR (lirc_base_dev), ir->d.minor)); +put_device (&ir->dev); out_lock:mutex_unlock (&lirc_dev_lock);
@@ -364,7 +371,6 @@ EXPORT_SYMBOL(lirc_register_driver);int lirc_unregister_driver (int minor) {struct irctl *ir; -struct cdev *cdev;if (minor <0 || minor >=MAX_IRCTL_DEVICES ) { pr_err("minor (%d) must be between 0 and %d!\n",
@@ -378,8 +384,6 @@ int lirc_unregister_driver(int minor)return -ENOENT ; } - cdev = ir->cdev; -mutex_lock (&lirc_dev_lock);if (ir->d.minor != minor) {
@@ -401,22 +405,20 @@ int lirc_unregister_driver(int minor)dev_dbg (ir->d.dev,LOGHEAD "releasing opened driver\n" , ir->d.name, ir->d.minor);wake_up_interruptible (&ir->buf->wait_poll); -mutex_lock (&ir->irctl_lock); + } -if (ir->d.set_use_dec) - ir->d.set_use_dec (ir->d.data); +mutex_lock (&ir->irctl_lock); -module_put (cdev->owner); -mutex_unlock (&ir->irctl_lock); - }else { -lirc_irctl_cleanup (ir); -cdev_del (cdev); -kfree (ir); - irctls[minor] =NULL ; - } +if (ir->d.set_use_dec) + ir->d.set_use_dec (ir->d.data); +mutex_unlock (&ir->irctl_lock);mutex_unlock (&lirc_dev_lock); +device_del (&ir->dev); +cdev_del (&ir->cdev); +put_device (&ir->dev); +return 0 ; }EXPORT_SYMBOL (lirc_unregister_driver);
@@ -424,7 +426,6 @@ EXPORT_SYMBOL(lirc_unregister_driver);int lirc_dev_fop_open (struct inode *inode,struct file *file) {struct irctl *ir; -struct cdev *cdev;int retval =0 ;if (iminor (inode) >=MAX_IRCTL_DEVICES ) {
@@ -459,18 +460,14 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file) goto error; } - cdev = ir->cdev; -if (try_module_get (cdev->owner)) { - ir->open++; -if (ir->d.set_use_inc) - retval = ir->d.set_use_inc (ir->d.data); - -if (retval) { -module_put (cdev->owner); - ir->open--; - }else if (ir->buf) { + ir->open++; +if (ir->d.set_use_inc) + retval = ir->d.set_use_inc (ir->d.data); +if (retval) { + ir->open--; + }else { +if (ir->buf)lirc_buffer_clear (ir->buf); - }if (ir->task)wake_up_process (ir->task); }
@@ -487,7 +484,6 @@ EXPORT_SYMBOL(lirc_dev_fop_open);int lirc_dev_fop_close (struct inode *inode,struct file *file) {struct irctl *ir = irctls[iminor (inode)]; -struct cdev *cdev;int ret;if (!ir) {
@@ -495,25 +491,14 @@ int lirc_dev_fop_close(struct inode *inode, struct file *file)return -EINVAL ; } - cdev = ir->cdev; - ret =mutex_lock_killable (&lirc_dev_lock);WARN_ON (ret);rc_close (ir->d.rdev); ir->open--; -if (ir->attached) { -if (ir->d.set_use_dec) - ir->d.set_use_dec (ir->d.data); -module_put (cdev->owner); - }else { -lirc_irctl_cleanup (ir); -cdev_del (cdev); - irctls[ir->d.minor] =NULL ; -kfree (ir); - } - +if (ir->d.set_use_dec) + ir->d.set_use_dec (ir->d.data);if (!ret)mutex_unlock (&lirc_dev_lock);
@@ -780,15 +765,12 @@ static int __init lirc_dev_init(void)return retval; } -pr_info ("IR Remote Control driver registered, major %d\n" ,MAJOR (lirc_base_dev));return 0 ; } - - static void __exit lirc_dev_exit(void) {class_destroy (lirc_class);
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 11/19 lirc: lirc interface should not be a raw decoder
In reply to Sean YoungThe lirc bridge exists as a raw decoder. We would like to make the bridge to also work for scancode drivers in further commits, so it cannot be a raw decoder.
Note that rc-code, lirc_dev, ir-lirc-codec are now calling functions of each other, so they've been merged into one module rc-core to avoid circular dependencies.
Since ir-lirc-codec no longer exists as separate codec module, there is no need for RC_DRIVER_IR_RAW_TX type drivers to call ir_raw_event_register().
--- drivers/media/rc/Kconfig | 15 ++++++------ drivers/media/rc/Makefile | 6 ++--- drivers/media/rc/ir-lirc-codec.c | 41 ++++----------------------------- drivers/media/rc/lirc_dev.c | 19 +++------------- drivers/media/rc/rc-core-priv.h | 24 +++++++++++++++++++- drivers/media/rc/rc-ir-raw.c | 17 +++++--------- drivers/media/rc/rc-main.c | 49 ++++++++++++++++++++-------------------- 7 files changed, 71 insertions(+), 100 deletions(-)
drivers/media/rc/Kconfig +7 -8
@@ -6,14 +6,8 @@ config RC_CORE source "drivers/media/rc/keymaps/Kconfig" -menuconfig RC_DECODERS - bool "Remote controller decoders" - depends on RC_CORE - default y - -if RC_DECODERS config LIRC - tristate "LIRC interface driver" + bool "LIRC interface driver" depends on RC_CORE ---help---
@@ -24,7 +18,7 @@ config LIRC encoding for IR transmitting (aka "blasting"). config IR_LIRC_CODEC - tristate "Enable IR to LIRC bridge" + bool "Enable IR to LIRC bridge" depends on RC_CORE depends on LIRC default y
@@ -33,7 +27,12 @@ config IR_LIRC_CODEC Enable this option to pass raw IR to and from userspace via the LIRC interface. +menuconfig RC_DECODERS + bool "Remote controller decoders" + depends on RC_CORE + default y +if RC_DECODERS config IR_NEC_DECODER tristate "Enable IR raw decoder for the NEC protocol" depends on RC_CORE
drivers/media/rc/Makefile +3 -3
@@ -1,9 +1,10 @@ -rc-core-objs := rc-main.o rc-ir-raw.o obj-y += keymaps/ obj-$(CONFIG_RC_CORE) += rc-core.o -obj-$(CONFIG_LIRC) += lirc_dev.o +rc-core-y := rc-main.o rc-ir-raw.o +rc-core-$(CONFIG_LIRC) += lirc_dev.o +rc-core-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
@@ -12,7 +13,6 @@ obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o obj-$(CONFIG_IR_SANYO_DECODER) += ir-sanyo-decoder.o obj-$(CONFIG_IR_SHARP_DECODER) += ir-sharp-decoder.o obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o -obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o obj-$(CONFIG_IR_XMP_DECODER) += ir-xmp-decoder.o # stand-alone IR receivers/transmitters
drivers/media/rc/ir-lirc-codec.c +5 -36
74 lines not on this page · raw message
drivers/media/rc/lirc_dev.c +3 -16
@@ -33,12 +33,10 @@#include <linux/device.h> #include <linux/cdev.h> -#include <media/rc-core.h> +#include "rc-core-priv.h" #include <media/lirc.h> #include <media/lirc_dev.h> -static bool debug; -#define IRCTL_DEV_NAME "BaseRemoteCtl"#define NOPLUG -1#define LOGHEAD "lirc_dev (%s[%d]): "
@@ -747,7 +745,7 @@ ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,EXPORT_SYMBOL (lirc_dev_fop_write); -static int __init lirc_dev_init (void ) +int __init lirc_dev_init (void ) {int retval;
@@ -771,19 +769,8 @@ static int __init lirc_dev_init(void)return 0 ; } -static void __exit lirc_dev_exit(void) +void __exit lirc_dev_exit(void) {class_destroy (lirc_class);unregister_chrdev_region (lirc_base_dev,MAX_IRCTL_DEVICES ); -pr_info ("module unloaded\n" ); } - -module_init (lirc_dev_init); -module_exit (lirc_dev_exit); - -MODULE_DESCRIPTION ("LIRC base driver module" ); -MODULE_AUTHOR ("Artur Lipowski" ); -MODULE_LICENSE ("GPL" ); - -module_param (debug, bool,S_IRUGO |S_IWUSR ); -MODULE_PARM_DESC (debug,"Enable debugging messages" );
drivers/media/rc/rc-core-priv.h +23 -1
@@ -30,7 +30,7 @@ struct ir_raw_handler {int (*encode)(enum rc_type protocol,u32 scancode,struct ir_raw_event *events,unsigned int max); -/* These two should only be used by the lirc decoder */ +/* These two should only be used by the mce kbd decoder */ int (*raw_register)(struct rc_dev *dev);int (*raw_unregister)(struct rc_dev *dev); };
@@ -270,6 +270,28 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);void ir_raw_init (void );/* +* lirc interface bridge +*/ +#ifdef CONFIG_IR_LIRC_CODEC +int ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev); +int ir_lirc_register (struct rc_dev *dev); +void ir_lirc_unregister (struct rc_dev *dev); +#else +static inline int ir_lirc_raw_event (struct rc_dev *dev, +struct ir_raw_event ev) {return 0 ; } +static inline int ir_lirc_register (struct rc_dev *dev) {return 0 ; } +static inline void ir_lirc_unregister (struct rc_dev *dev) { } +#endif + +#ifdef CONFIG_LIRC +int lirc_dev_init (void ); +void lirc_dev_exit (void ); +#else +static inline int lirc_dev_init (void ) {return 0 ; } +static inline void lirc_dev_exit (void ) {} +#endif + +/* * Decoder initialization code * * Those load logic are called during ir-core init, and automatically
drivers/media/rc/rc-ir-raw.c +6 -11
@@ -40,6 +40,7 @@ static int ir_raw_event_thread(void *data)if (raw->dev->enabled_protocols & handler->protocols || !handler->protocols) handler->decode (raw->dev, ev); +ir_lirc_raw_event (raw->dev, ev); raw->prev_ev = ev; }mutex_unlock (&ir_raw_handler_lock);
@@ -502,18 +503,12 @@ int ir_raw_event_register(struct rc_dev *dev) dev->change_protocol = change_protocol;INIT_KFIFO (dev->raw->kfifo); -/* -* raw transmitters do not need any event registration -* because the event is coming from userspace -*/ -if (dev->driver_type !=RC_DRIVER_IR_RAW_TX ) { - dev->raw->thread =kthread_run (ir_raw_event_thread, dev->raw, -"rc%u" , dev->minor); + dev->raw->thread =kthread_run (ir_raw_event_thread, dev->raw, +"rc%u" , dev->minor); -if (IS_ERR (dev->raw->thread)) { - rc =PTR_ERR (dev->raw->thread); - goto out; - } +if (IS_ERR (dev->raw->thread)) { + rc =PTR_ERR (dev->raw->thread); + goto out; }mutex_lock (&ir_raw_handler_lock);
drivers/media/rc/rc-main.c +24 -25
103 lines not on this page · raw message
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 12/19 lirc: exorcise struct irctl
In reply to Sean Younglirc_register_driver() takes a struct lirc_driver argument, it then allocates a new struct irctl which contains another struct lirc_driver and then copies it over.
By moving the members of struct irctl to struct lirc_driver, we avoid the extra allocation and we can remove struct irctl completely. We also remove the duplicate chunk_size member.
In addition, the members of irctl are now visible elsewhere.
Tested send, receive and rmmod with lirc_zilog and various rc-core devices.
--- drivers/media/rc/ir-lirc-codec.c | 3 +- drivers/media/rc/lirc_dev.c | 353 +++++++++++++++----------------- drivers/staging/media/lirc/lirc_sasem.c | 3 +- drivers/staging/media/lirc/lirc_zilog.c | 167 ++++++++------- include/media/lirc_dev.h | 33 ++- 5 files changed, 288 insertions(+), 271 deletions(-)
drivers/media/rc/ir-lirc-codec.c +1 -2
@@ -407,7 +407,7 @@ int ir_lirc_register(struct rc_dev *dev) drv->set_use_dec = &ir_lirc_close; drv->code_length =sizeof (struct ir_raw_event ) *8 ; drv->fops = &lirc_fops; - drv->dev = &dev->dev; + drv->dev.parent = &dev->dev; drv->rdev = dev; drv->owner =THIS_MODULE ;
@@ -437,5 +437,4 @@ void ir_lirc_unregister(struct rc_dev *dev)lirc_unregister_driver (lirc->drv->minor);lirc_buffer_free (lirc->drv->rbuf);kfree (lirc->drv->rbuf); -kfree (lirc->drv); }
drivers/media/rc/lirc_dev.c +163 -190
767 lines not on this page · raw message
drivers/staging/media/lirc/lirc_sasem.c +1 -2
@@ -167,7 +167,6 @@ static void delete_context(struct sasem_context *context)usb_free_urb (context->rx_urb);/* IR */ lirc_buffer_free (context->driver->rbuf);kfree (context->driver->rbuf); -kfree (context->driver);kfree (context); }
@@ -771,7 +770,7 @@ static int sasem_probe(struct usb_interface *interface, driver->rbuf = rbuf; driver->set_use_inc = ir_open; driver->set_use_dec = ir_close; - driver->dev = &interface->dev; + driver->dev.parent = &interface->dev; driver->owner =THIS_MODULE ;mutex_lock (&context->ctx_lock);
drivers/staging/media/lirc/lirc_zilog.c +92 -75
505 lines not on this page · raw message
include/media/lirc_dev.h +31 -2
@@ -15,6 +15,8 @@#define mod (n, div) ((n) % (div))#include <linux/slab.h> +#include <linux/cdev.h> +#include <linux/device.h> #include <linux/fs.h> #include <linux/ioctl.h> #include <linux/poll.h>
@@ -182,6 +184,20 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,* device. * * @owner: the module owning this struct +* +* @attached: 1 if the device is still attached, 0 otherwise +* +* @open: 1 if the lirc char device has been opened +* +* @irctl_lock: mutex for the structure +* +* @buf: read buffer used if rbuf is not set +* +* @cdev: the char device structure +* +* @task: thread performing read polling, if present +* +* @jiffies_to_wait: jiffies to sleep in read polling thread */ struct lirc_driver {char name[40 ];
@@ -202,15 +218,28 @@ struct lirc_driver {void (*set_use_dec)(void *data);struct rc_dev *rdev;const struct file_operations *fops; -struct device *dev; +struct device dev;struct module *owner; + +int attached; +int open; + +struct mutex irctl_lock;/* locks this driver */ +struct lirc_buffer *buf; + +struct cdev cdev; + +struct task_struct *task; +long jiffies_to_wait; };/* following functions can be called ONLY from user context * * returns negative value on error or minor number * of the registered device if success -* contents of the structure pointed by p is copied +* contents of the structure pointed by will be freed once +* lirc_unregister_driver is called and all open file descriptors +* are closed. */ extern int lirc_register_driver (struct lirc_driver *d);
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 13/19 lirc: use plain kfifo rather than lirc_buffer
In reply to Sean YoungSince a lirc char device can only be opened once, there can only be one reader. By using a plain kfifo we don't need a spinlock and we can use kfifo_to_user. The code is much simplified.
Unfortunately we cannot eliminate lirc_buffer from the tree yet, as there are still some staging lirc drivers which use it.
--- drivers/media/rc/ir-lirc-codec.c | 136 ++++++++++++++++++++++++--------------- drivers/media/rc/lirc_dev.c | 5 +- drivers/media/rc/rc-core-priv.h | 33 ++++++---- include/media/rc-core.h | 2 + 4 files changed, 107 insertions(+), 69 deletions(-)
drivers/media/rc/ir-lirc-codec.c +83 -53
@@ -19,23 +19,16 @@#include <media/rc-core.h> #include "rc-core-priv.h" -#define LIRCBUF_SIZE 256 -/** * ir_lirc_raw_event() - Send raw IR data to lirc to be relayed to userspace * * @input_dev: the struct rc_dev descriptor of the device * @duration: the struct ir_raw_event descriptor of the pulse/space -* -* This function returns -EINVAL if the lirc interfaces aren't wired up. */ -int ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev) +void ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev) { -struct lirc_codec *lirc = &dev->raw->lirc; -int sample; - -if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf) -return -EINVAL ; +struct lirc_node *lirc = dev->lirc; +unsigned int sample;/* Packet start */ if (ev.reset) {
@@ -54,26 +47,22 @@ int ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)/* Packet end */ }else if (ev.timeout) { -if (lirc->gap) -return 0 ; +return ; lirc->gap_start =ktime_get (); lirc->gap = true; lirc->gap_duration = ev.duration;if (!lirc->send_timeout_reports) -return 0 ; +return ; sample =LIRC_TIMEOUT (ev.duration /1000 );IR_dprintk (2 ,"timeout report (duration: %d)\n" , sample);/* Normal sample */ }else { -if (lirc->gap) { -int gap_sample; - lirc->gap_duration +=ktime_to_ns (ktime_sub (ktime_get (), lirc->gap_start));
@@ -82,9 +71,7 @@ int ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev) lirc->gap_duration =min (lirc->gap_duration, (u64 )LIRC_VALUE_MASK ); - gap_sample =LIRC_SPACE (lirc->gap_duration); -lirc_buffer_write (dev->raw->lirc.drv->rbuf, - (unsigned char *) &gap_sample); +kfifo_put (&lirc->rawir,LIRC_SPACE (lirc->gap_duration)); lirc->gap = false; }
@@ -94,17 +81,14 @@ int ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev) TO_US(ev.duration), TO_STR(ev.pulse)); } -lirc_buffer_write (dev->raw->lirc.drv->rbuf, - (unsigned char *) &sample); -wake_up (&dev->raw->lirc.drv->rbuf->wait_poll); - -return 0 ; +kfifo_put (&lirc->rawir, sample); +wake_up_poll (&lirc->wait_poll,POLLIN |POLLRDNORM ); }static ssize_t ir_lirc_transmit_ir (struct file *file,const char __user *buf,size_t n,loff_t *ppos) { -struct lirc_codec *lirc; +struct lirc_node *lirc;struct rc_dev *dev;unsigned int *txbuf;/* buffer with values to transmit */ ssize_t ret = -EINVAL ;
@@ -179,7 +163,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,static long ir_lirc_ioctl (struct file *filep,unsigned int cmd,unsigned long arg) { -struct lirc_codec *lirc; +struct lirc_node *lirc;struct rc_dev *dev;u32 __user *argp = (u32 __user *)(arg);int ret =0 ;
@@ -248,7 +232,7 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,return -EINVAL ;return dev->s_rx_carrier_range (dev, - dev->raw->lirc.carrier_low, + dev->lirc->carrier_low, val);case LIRC_SET_REC_CARRIER_RANGE :
@@ -258,7 +242,7 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,if (val <=0 )return -EINVAL ; - dev->raw->lirc.carrier_low = val; + dev->lirc->carrier_low = val;return 0 ;case LIRC_GET_REC_RESOLUTION :
@@ -326,8 +310,64 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,return ret; } +static unsigned int ir_lirc_poll (struct file *filep, +struct poll_table_struct *wait) +{ +struct lirc_node *lirc =lirc_get_pdata (filep); +unsigned int events =0 ; + +poll_wait (filep, &lirc->wait_poll, wait); + +if (!lirc->drv.attached) + events =POLLHUP ; +else if (!kfifo_is_empty (&lirc->rawir)) + events =POLLIN |POLLRDNORM ; + +return events; +} + +static ssize_t ir_lirc_read (struct file *filep,char __user *buffer, +size_t length,loff_t *ppos) +{ +struct lirc_node *lirc =lirc_get_pdata (filep); +unsigned int copied; +int ret; + +if (length %sizeof (unsigned int )) +return -EINVAL ; + +if (!lirc->drv.attached) +return -ENODEV ; + +do { +if (kfifo_is_empty (&lirc->rawir)) { +if (filep->f_flags &O_NONBLOCK ) +return -EAGAIN ; + + ret =wait_event_interruptible (lirc->wait_poll, + !kfifo_is_empty (&lirc->rawir) || + !lirc->drv.attached); +if (ret) +return ret; + } + +if (!lirc->drv.attached) +return -ENODEV ; + + ret =kfifo_to_user (&lirc->rawir, buffer, length, &copied); +if (ret) +return ret; + }while (copied ==0 ); + +return copied; +} +static int ir_lirc_open (void *data) { +struct lirc_node *lirc = data; + +kfifo_reset_out (&lirc->rawir); +return 0 ; }
@@ -343,8 +383,8 @@ static const struct file_operations lirc_fops = { #ifdef CONFIG_COMPAT .compat_ioctl = ir_lirc_ioctl, #endif - .read = lirc_dev_fop_read, - .poll = lirc_dev_fop_poll, + .read = ir_lirc_read, + .poll = ir_lirc_poll, .open = lirc_dev_fop_open, .release = lirc_dev_fop_close, .llseek = no_llseek,
@@ -353,22 +393,14 @@ static const struct file_operations lirc_fops = {int ir_lirc_register (struct rc_dev *dev) {struct lirc_driver *drv; -struct lirc_buffer *rbuf; +struct lirc_node *node;int rc = -ENOMEM ;unsigned long features =0 ; - drv =kzalloc (sizeof (struct lirc_driver ),GFP_KERNEL ); -if (!drv) + node =kzalloc (sizeof (*node),GFP_KERNEL ); +if (!node)return rc; - rbuf =kzalloc (sizeof (struct lirc_buffer ),GFP_KERNEL ); -if (!rbuf) - goto rbuf_alloc_failed; - - rc =lirc_buffer_init (rbuf,sizeof (int ),LIRCBUF_SIZE ); -if (rc) - goto rbuf_init_failed; -if (dev->driver_type !=RC_DRIVER_IR_RAW_TX ) { features |=LIRC_CAN_REC_MODE2 ;if (dev->rx_resolution)
@@ -397,12 +429,12 @@ int ir_lirc_register(struct rc_dev *dev)if (dev->max_timeout) features |=LIRC_CAN_SET_REC_TIMEOUT ; + drv = &node->drv;snprintf (drv->name,sizeof (drv->name),"ir-lirc-codec (%s)" , dev->driver_name); drv->minor =-1 ; drv->features = features; - drv->data = &dev->raw->lirc; - drv->rbuf = rbuf; + drv->data = node; drv->set_use_inc = &ir_lirc_open; drv->set_use_dec = &ir_lirc_close; drv->code_length =sizeof (struct ir_raw_event ) *8 ;
@@ -411,30 +443,28 @@ int ir_lirc_register(struct rc_dev *dev) drv->rdev = dev; drv->owner =THIS_MODULE ; +INIT_KFIFO (node->rawir); +init_waitqueue_head (&node->wait_poll); + drv->minor =lirc_register_driver (drv);if (drv->minor <0 ) { rc = -ENODEV ; goto lirc_register_failed; } - dev->raw->lirc.drv = drv; - dev->raw->lirc.dev = dev; + node->dev = dev; + dev->lirc = node;return 0 ; lirc_register_failed: -rbuf_init_failed: -kfree (rbuf); -rbuf_alloc_failed:kfree (drv); -return rc; }void ir_lirc_unregister (struct rc_dev *dev) { -struct lirc_codec *lirc = &dev->raw->lirc; +struct lirc_node *lirc = dev->lirc; -lirc_unregister_driver (lirc->drv->minor); -lirc_buffer_free (lirc->drv->rbuf); -kfree (lirc->drv->rbuf); +wake_up_poll (&lirc->wait_poll,POLLHUP ); +lirc_unregister_driver (lirc->drv.minor); }
drivers/media/rc/lirc_dev.c +3 -2
@@ -328,7 +328,7 @@ int lirc_register_driver(struct lirc_driver *d)if (minor <0 )return minor; -if (LIRC_CAN_REC (d->features)) { +if (!d->rdev) { err =lirc_allocate_buffer (irctls[minor]);if (err)lirc_unregister_driver (minor);
@@ -374,7 +374,8 @@ int lirc_unregister_driver(int minor)if (d->open) {dev_dbg (d->dev.parent,LOGHEAD "releasing opened driver\n" , d->name, d->minor); -wake_up_interruptible (&d->buf->wait_poll); +if (d->buf) +wake_up_interruptible (&d->buf->wait_poll); }mutex_lock (&d->irctl_lock);
drivers/media/rc/rc-core-priv.h +19 -14
@@ -19,7 +19,11 @@/* Define the max number of pulse/space transitions to buffer */ #define MAX_IR_EVENT_SIZE 512 +/* Define the number of samples lirc can buffer or transmit */ +#define LIRCBUF_SIZE 256 +#include <linux/slab.h> +#include <media/lirc_dev.h> #include <media/rc-core.h> struct ir_raw_handler {
@@ -35,6 +39,18 @@ struct ir_raw_handler {int (*raw_unregister)(struct rc_dev *dev); }; +struct lirc_node { +struct lirc_driver drv; +struct rc_dev *dev; +int carrier_low; + DECLARE_KFIFO(rawir, unsigned int, LIRCBUF_SIZE); +wait_queue_head_t wait_poll; +ktime_t gap_start; +u64 gap_duration; +bool gap; +bool send_timeout_reports; +}; +struct ir_raw_event_ctrl {struct list_head list;/* to keep track of raw clients */ struct task_struct *thread;
@@ -103,17 +119,6 @@ struct ir_raw_event_ctrl {unsigned count;unsigned wanted_bits; } mce_kbd; -struct lirc_codec { -struct rc_dev *dev; -struct lirc_driver *drv; -int carrier_low; - -ktime_t gap_start; -u64 gap_duration; -bool gap; -bool send_timeout_reports; - - } lirc;struct xmp_dec {int state;unsigned count;
@@ -273,12 +278,12 @@ void ir_raw_init(void);* lirc interface bridge */ #ifdef CONFIG_IR_LIRC_CODEC -int ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev); +void ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev);int ir_lirc_register (struct rc_dev *dev);void ir_lirc_unregister (struct rc_dev *dev);#else -static inline int ir_lirc_raw_event (struct rc_dev *dev, -struct ir_raw_event ev) {return 0 ; } +static inline void ir_lirc_raw_event (struct rc_dev *dev, +struct ir_raw_event ev) { }static inline int ir_lirc_register (struct rc_dev *dev) {return 0 ; }static inline void ir_lirc_unregister (struct rc_dev *dev) { }#endif
include/media/rc-core.h +2 -0
@@ -115,6 +115,7 @@ enum rc_filter_type {* @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler +* @lirc: lirc chardev node * @change_protocol: allow changing the protocol used on hardware decoders * @open: callback to allow drivers to enable polling/irq when IR input device * is opened.
@@ -175,6 +176,7 @@ struct rc_dev {u32 max_timeout;u32 rx_resolution;u32 tx_resolution; +struct lirc_node *lirc;int (*change_protocol)(struct rc_dev *dev,u64 *rc_type);int (*open)(struct rc_dev *dev);void (*close)(struct rc_dev *dev);
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 14/19 lirc: implement scancode sending
In reply to Sean YoungThis introduces a new lirc mode: scancode. Any device which can send raw IR can also send scancodes.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_SEND_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode = {
.scancode = 0x1e3d,
.rc_type = RC_TYPE_RC5,
.flags = 0,
.timestamp = 0
};
write(fd, &scancode, sizeof(scancode));
close(fd);
}Note that toggle (rc5, rc6) and repeats (nec) are not implemented. Nor is there a method for holding down a key for a period.
--- drivers/media/rc/ir-lirc-codec.c | 64 ++++++++++++++++++++++++++------- drivers/media/rc/rc-core-priv.h | 1 + include/media/rc-map.h | 54 +--------------------------- include/uapi/linux/lirc.h | 76 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 130 insertions(+), 65 deletions(-)
drivers/media/rc/ir-lirc-codec.c +52 -12
@@ -91,6 +91,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,struct lirc_node *lirc;struct rc_dev *dev;unsigned int *txbuf;/* buffer with values to transmit */ +struct ir_raw_event *raw =NULL ;ssize_t ret = -EINVAL ;size_t count;ktime_t start;
@@ -104,16 +105,49 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,if (!lirc)return -EFAULT ; -if (n <sizeof (unsigned ) || n %sizeof (unsigned )) -return -EINVAL ; +if (lirc->send_mode ==LIRC_MODE_SCANCODE ) { +struct lirc_scancode scan; - count = n /sizeof (unsigned ); -if (count >LIRCBUF_SIZE || count %2 ==0 ) -return -EINVAL ; +if (n !=sizeof (scan)) +return -EINVAL ; + +if (copy_from_user (&scan, buf,sizeof (scan))) +return -EFAULT ; + +if (scan.flags || scan.timestamp) +return -EINVAL ; + + raw =kmalloc_array (LIRCBUF_SIZE ,sizeof (*raw),GFP_KERNEL ); +if (!raw) +return -ENOMEM ; + + ret =ir_raw_encode_scancode (scan.rc_type, scan.scancode, + raw,LIRCBUF_SIZE ); +if (ret <0 ) + goto out; + + count = ret; - txbuf =memdup_user (buf, n); -if (IS_ERR (txbuf)) -return PTR_ERR (txbuf); + txbuf =kmalloc_array (count,sizeof (unsigned int ),GFP_KERNEL ); +if (!txbuf) { + ret = -ENOMEM ; + goto out; + } + +for (i =0 ; i < count; i++) + txbuf[i] =DIV_ROUND_UP (raw[i].duration,1000 ); + }else { +if (n <sizeof (unsigned int ) || n %sizeof (unsigned int )) +return -EINVAL ; + + count = n /sizeof (unsigned int ); +if (count >LIRCBUF_SIZE || count %2 ==0 ) +return -EINVAL ; + + txbuf =memdup_user (buf, n); +if (IS_ERR (txbuf)) +return PTR_ERR (txbuf); + } dev = lirc->dev;if (!dev) {
@@ -142,7 +176,10 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,for (duration = i =0 ; i < ret; i++) duration += txbuf[i]; - ret *=sizeof (unsigned int ); +if (lirc->send_mode ==LIRC_MODE_SCANCODE ) + ret = n; +else + ret *=sizeof (unsigned int );/* * The lircd gap calculation expects the write function to
@@ -157,6 +194,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, out:kfree (txbuf); +kfree (raw);return ret; }
@@ -190,15 +228,17 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,if (!dev->tx_ir)return -ENOTTY ; - val =LIRC_MODE_PULSE ; + val = lirc->send_mode;break ;case LIRC_SET_SEND_MODE :if (!dev->tx_ir)return -ENOTTY ; -if (val !=LIRC_MODE_PULSE ) +if (!(val ==LIRC_MODE_PULSE || val ==LIRC_MODE_SCANCODE ))return -EINVAL ; + + lirc->send_mode = val;return 0 ;/* TX settings */
@@ -407,7 +447,7 @@ int ir_lirc_register(struct rc_dev *dev) features |=LIRC_CAN_GET_REC_RESOLUTION ; }if (dev->tx_ir) { - features |=LIRC_CAN_SEND_PULSE ; + features |=LIRC_CAN_SEND_PULSE |LIRC_CAN_SEND_SCANCODE ;if (dev->s_tx_mask) features |=LIRC_CAN_SET_TRANSMITTER_MASK ;if (dev->s_tx_carrier)
drivers/media/rc/rc-core-priv.h +1 -0
@@ -49,6 +49,7 @@ struct lirc_node {u64 gap_duration;bool gap;bool send_timeout_reports; +int send_mode; };struct ir_raw_event_ctrl {
include/media/rc-map.h +1 -53
60 lines not on this page · raw message
include/uapi/linux/lirc.h +76 -0
98 lines not on this page · raw message
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 15/19 rc: use the correct carrier for scancode transmit
In reply to Sean YoungIf the lirc device supports it, set the carrier for the protocol.
--- drivers/media/rc/ir-jvc-decoder.c | 1 + drivers/media/rc/ir-lirc-codec.c | 28 ++++++++++++++++------------ drivers/media/rc/ir-mce_kbd-decoder.c | 1 + drivers/media/rc/ir-nec-decoder.c | 1 + drivers/media/rc/ir-rc5-decoder.c | 1 + drivers/media/rc/ir-rc6-decoder.c | 1 + drivers/media/rc/ir-sanyo-decoder.c | 1 + drivers/media/rc/ir-sharp-decoder.c | 1 + drivers/media/rc/ir-sony-decoder.c | 1 + drivers/media/rc/rc-core-priv.h | 1 + drivers/media/rc/rc-ir-raw.c | 30 ++++++++++++++++++++++++++++++ include/media/rc-core.h | 1 + 12 files changed, 56 insertions(+), 12 deletions(-)
drivers/media/rc/ir-jvc-decoder.c +1 -0
@@ -212,6 +212,7 @@ static struct ir_raw_handler jvc_handler = { .protocols = RC_BIT_JVC, .decode = ir_jvc_decode, .encode = ir_jvc_encode, + .carrier = 38000, };static int __init ir_jvc_decode_init (void )
drivers/media/rc/ir-lirc-codec.c +16 -12
@@ -90,7 +90,7 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, {struct lirc_node *lirc;struct rc_dev *dev; -unsigned int *txbuf;/* buffer with values to transmit */ +unsigned int *txbuf =NULL ;/* buffer with values to transmit */ struct ir_raw_event *raw =NULL ;ssize_t ret = -EINVAL ;size_t count;
@@ -105,6 +105,13 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,if (!lirc)return -EFAULT ; + dev = lirc->dev; +if (!dev) +return -EFAULT ; + +if (!dev->tx_ir) +return -EINVAL ; +if (lirc->send_mode ==LIRC_MODE_SCANCODE ) {struct lirc_scancode scan;
@@ -135,7 +142,15 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf, }for (i =0 ; i < count; i++) +/* Convert from NS to US */ txbuf[i] =DIV_ROUND_UP (raw[i].duration,1000 ); + +if (dev->s_tx_carrier) { +int carrier =ir_raw_encode_carrier (scan.rc_type); + +if (carrier >0 ) + dev->s_tx_carrier (dev, carrier); + } }else {if (n <sizeof (unsigned int ) || n %sizeof (unsigned int ))return -EINVAL ;
@@ -149,17 +164,6 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,return PTR_ERR (txbuf); } - dev = lirc->dev; -if (!dev) { - ret = -EFAULT ; - goto out; - } - -if (!dev->tx_ir) { - ret = -EINVAL ; - goto out; - } -for (i =0 ; i < count; i++) {if (txbuf[i] >IR_MAX_DURATION /1000 - duration || !txbuf[i]) { ret = -EINVAL ;
drivers/media/rc/ir-mce_kbd-decoder.c +1 -0
@@ -468,6 +468,7 @@ static struct ir_raw_handler mce_kbd_handler = { .encode = ir_mce_kbd_encode, .raw_register = ir_mce_kbd_register, .raw_unregister = ir_mce_kbd_unregister, + .carrier = 36000, };static int __init ir_mce_kbd_decode_init (void )
drivers/media/rc/ir-nec-decoder.c +1 -0
@@ -288,6 +288,7 @@ static struct ir_raw_handler nec_handler = { .protocols = RC_BIT_NEC | RC_BIT_NECX | RC_BIT_NEC32, .decode = ir_nec_decode, .encode = ir_nec_encode, + .carrier = 38000, };static int __init ir_nec_decode_init (void )
drivers/media/rc/ir-rc5-decoder.c +1 -0
@@ -281,6 +281,7 @@ static struct ir_raw_handler rc5_handler = { .protocols = RC_BIT_RC5 | RC_BIT_RC5X_20 | RC_BIT_RC5_SZ, .decode = ir_rc5_decode, .encode = ir_rc5_encode, + .carrier = 36000, };static int __init ir_rc5_decode_init (void )
drivers/media/rc/ir-rc6-decoder.c +1 -0
@@ -408,6 +408,7 @@ static struct ir_raw_handler rc6_handler = { RC_BIT_RC6_MCE, .decode = ir_rc6_decode, .encode = ir_rc6_encode, + .carrier = 36000, };static int __init ir_rc6_decode_init (void )
drivers/media/rc/ir-sanyo-decoder.c +1 -0
@@ -222,6 +222,7 @@ static struct ir_raw_handler sanyo_handler = { .protocols = RC_BIT_SANYO, .decode = ir_sanyo_decode, .encode = ir_sanyo_encode, + .carrier = 38000, };static int __init ir_sanyo_decode_init (void )
drivers/media/rc/ir-sharp-decoder.c +1 -0
@@ -226,6 +226,7 @@ static struct ir_raw_handler sharp_handler = { .protocols = RC_BIT_SHARP, .decode = ir_sharp_decode, .encode = ir_sharp_encode, + .carrier = 38000, };static int __init ir_sharp_decode_init (void )
drivers/media/rc/ir-sony-decoder.c +1 -0
@@ -220,6 +220,7 @@ static struct ir_raw_handler sony_handler = { .protocols = RC_BIT_SONY12 | RC_BIT_SONY15 | RC_BIT_SONY20, .decode = ir_sony_decode, .encode = ir_sony_encode, + .carrier = 40000, };static int __init ir_sony_decode_init (void )
drivers/media/rc/rc-core-priv.h +1 -0
@@ -33,6 +33,7 @@ struct ir_raw_handler {int (*decode)(struct rc_dev *dev,struct ir_raw_event event);int (*encode)(enum rc_type protocol,u32 scancode,struct ir_raw_event *events,unsigned int max); +u32 carrier;/* These two should only be used by the mce kbd decoder */ int (*raw_register)(struct rc_dev *dev);
drivers/media/rc/rc-ir-raw.c +30 -0
@@ -484,6 +484,36 @@ int ir_raw_encode_scancode(enum rc_type protocol, u32 scancode, }EXPORT_SYMBOL (ir_raw_encode_scancode); +/** +* ir_raw_encode_carrier() - Get carrier used for protocol +* +* @protocol: protocol +* +* Attempts to find the carrier for the specified protocol +* +* Returns: The carrier in Hz +* -EINVAL if the protocol is invalid, or if no +* compatible encoder was found. +*/ +int ir_raw_encode_carrier (enum rc_type protocol) +{ +struct ir_raw_handler *handler; +int ret = -EINVAL ; +u64 mask =1ULL << protocol; + +mutex_lock (&ir_raw_handler_lock); +list_for_each_entry (handler, &ir_raw_handler_list, list) { +if (handler->protocols & mask && handler->encode) { + ret = handler->carrier; +break ; + } + } +mutex_unlock (&ir_raw_handler_lock); + +return ret; +} +EXPORT_SYMBOL (ir_raw_encode_carrier); +/* * Used to (un)register raw event clients */
include/media/rc-core.h +1 -0
@@ -318,6 +318,7 @@ int ir_raw_event_store_with_filter(struct rc_dev *dev,void ir_raw_event_set_idle (struct rc_dev *dev,bool idle);int ir_raw_encode_scancode (enum rc_type protocol,u32 scancode,struct ir_raw_event *events,unsigned int max); +int ir_raw_encode_carrier (enum rc_type protocol);static inline void ir_raw_event_reset (struct rc_dev *dev) {
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 16/19 rc: auto load encoder if necessary
In reply to Sean YoungWhen sending scancodes, load the encoder if we need it.
--- drivers/media/rc/rc-core-priv.h | 1 + drivers/media/rc/rc-ir-raw.c | 2 ++ drivers/media/rc/rc-main.c | 2 +- 3 files changed, 4 insertions(+), 1 deletion(-)
drivers/media/rc/rc-core-priv.h +1 -0
@@ -274,6 +274,7 @@ int ir_raw_event_register(struct rc_dev *dev);void ir_raw_event_unregister (struct rc_dev *dev);int ir_raw_handler_register (struct ir_raw_handler *ir_raw_handler);void ir_raw_handler_unregister (struct ir_raw_handler *ir_raw_handler); +void ir_raw_load_modules (u64 *protocols);void ir_raw_init (void );/*
drivers/media/rc/rc-ir-raw.c +2 -0
@@ -470,6 +470,8 @@ int ir_raw_encode_scancode(enum rc_type protocol, u32 scancode,int ret = -EINVAL ;u64 mask =1ULL << protocol; +ir_raw_load_modules (&mask); +mutex_lock (&ir_raw_handler_lock);list_for_each_entry (handler, &ir_raw_handler_list, list) {if (handler->protocols & mask && handler->encode) {
drivers/media/rc/rc-main.c +1 -1
@@ -1039,7 +1039,7 @@ static int parse_protocol_change(u64 *protocols, const char *buf)return count; } -static void ir_raw_load_modules (u64 *protocols) +void ir_raw_load_modules (u64 *protocols) {u64 available;int i, ret;
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 17/19 lirc: implement reading scancode
In reply to Sean YoungThis implements LIRC_MODE_SCANCODE reading from the lirc device. The scancode can be read from the input device too, but with this interface you get the rc protocol, toggle and repeat status in addition too just the scancode.
int main()
{
int fd, mode, rc;
fd = open("/dev/lirc0", O_RDWR);
mode = LIRC_MODE_SCANCODE;
if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
// kernel too old or lirc does not support transmit
}
struct lirc_scancode scancode;
while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
scancode.rc_type, scancode.scancode,
!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
}
close(fd);
}Note that the translated KEY_* is not included, that information is published to the input device.
--- drivers/media/rc/ir-lirc-codec.c | 115 +++++++++++++++++++++++++++------- drivers/media/rc/ir-mce_kbd-decoder.c | 6 ++ drivers/media/rc/rc-core-priv.h | 5 ++ drivers/media/rc/rc-main.c | 14 +++++ 4 files changed, 118 insertions(+), 22 deletions(-)
drivers/media/rc/ir-lirc-codec.c +93 -22
@@ -85,6 +85,15 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)wake_up_poll (&lirc->wait_poll,POLLIN |POLLRDNORM ); } +void ir_lirc_scancode_event (struct rc_dev *dev,struct lirc_scancode *lsc) +{ + lsc->timestamp =ktime_get_ns (); + +if (kfifo_put (&dev->lirc->scancodes, *lsc)) +wake_up_poll (&dev->lirc->wait_poll,POLLIN |POLLRDNORM ); +} +EXPORT_SYMBOL_GPL (ir_lirc_scancode_event); +static ssize_t ir_lirc_transmit_ir (struct file *file,const char __user *buf,size_t n,loff_t *ppos) {
@@ -226,8 +235,31 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, }switch (cmd) { +case LIRC_GET_REC_MODE : +if (dev->driver_type ==RC_DRIVER_IR_RAW_TX ) +return -ENOTTY ; + + val = lirc->rec_mode; +break ; + +case LIRC_SET_REC_MODE : +switch (dev->driver_type) { +case RC_DRIVER_SCANCODE : +if (val !=LIRC_MODE_SCANCODE ) +return -EINVAL ; +break ; +case RC_DRIVER_IR_RAW : +if (!(val ==LIRC_MODE_SCANCODE || + val ==LIRC_MODE_MODE2 )) +return -EINVAL ; +break ; +default : +return -ENOTTY ; + } + + lirc->rec_mode = val; +return 0 ; -/* legacy support */ case LIRC_GET_SEND_MODE :if (!dev->tx_ir)return -ENOTTY ;
@@ -362,10 +394,15 @@ static unsigned int ir_lirc_poll(struct file *filep,poll_wait (filep, &lirc->wait_poll, wait); -if (!lirc->drv.attached) +if (!lirc->drv.attached) { events =POLLHUP ; -else if (!kfifo_is_empty (&lirc->rawir)) - events =POLLIN |POLLRDNORM ; + }else if (lirc->rec_mode ==LIRC_MODE_SCANCODE ) { +if (!kfifo_is_empty (&lirc->rawir)) + events =POLLIN |POLLRDNORM ; + }else if (lirc->rec_mode ==LIRC_MODE_MODE2 ) { +if (!kfifo_is_empty (&lirc->scancodes)) + events =POLLIN |POLLRDNORM ; + }return events; }
@@ -377,31 +414,58 @@ static ssize_t ir_lirc_read(struct file *filep, char __user *buffer,unsigned int copied;int ret; -if (length %sizeof (unsigned int )) -return -EINVAL ; -if (!lirc->drv.attached)return -ENODEV ; -do { -if (kfifo_is_empty (&lirc->rawir)) { -if (filep->f_flags &O_NONBLOCK ) -return -EAGAIN ; +if (lirc->rec_mode ==LIRC_MODE_SCANCODE ) { +if (length %sizeof (struct lirc_scancode )) +return -EINVAL ; + +do { +if (kfifo_is_empty (&lirc->scancodes)) { +if (filep->f_flags &O_NONBLOCK ) +return -EAGAIN ; - ret =wait_event_interruptible (lirc->wait_poll, - !kfifo_is_empty (&lirc->rawir) || + ret =wait_event_interruptible (lirc->wait_poll, + !kfifo_is_empty (&lirc->scancodes) || !lirc->drv.attached); +if (ret) +return ret; + } + +if (!lirc->drv.attached) +return -ENODEV ; + + ret =kfifo_to_user (&lirc->scancodes, buffer, length, + &copied);if (ret)return ret; - } + }while (copied ==0 ); + }else { +if (length %sizeof (unsigned int )) +return -EINVAL ; -if (!lirc->drv.attached) -return -ENODEV ; +do { +if (kfifo_is_empty (&lirc->rawir)) { +if (filep->f_flags &O_NONBLOCK ) +return -EAGAIN ; - ret =kfifo_to_user (&lirc->rawir, buffer, length, &copied); -if (ret) -return ret; - }while (copied ==0 ); + ret =wait_event_interruptible (lirc->wait_poll, + !kfifo_is_empty (&lirc->rawir) || + !lirc->drv.attached); +if (ret) +return ret; + } + +if (!lirc->drv.attached) +return -ENODEV ; + + ret =kfifo_to_user (&lirc->rawir, buffer, length, + &copied); +if (ret) +return ret; + }while (copied ==0 ); + }return copied; }
@@ -411,6 +475,7 @@ static int ir_lirc_open(void *data)struct lirc_node *lirc = data;kfifo_reset_out (&lirc->rawir); +kfifo_reset_out (&lirc->scancodes);return 0 ; }
@@ -445,12 +510,17 @@ int ir_lirc_register(struct rc_dev *dev)if (!node)return rc; -if (dev->driver_type !=RC_DRIVER_IR_RAW_TX ) { - features |=LIRC_CAN_REC_MODE2 ; +if (dev->driver_type ==RC_DRIVER_SCANCODE ) { + features |=LIRC_CAN_REC_SCANCODE ; + node->rec_mode =LIRC_MODE_SCANCODE ; + }else if (dev->driver_type ==RC_DRIVER_IR_RAW ) { + features |=LIRC_CAN_REC_MODE2 |LIRC_CAN_REC_SCANCODE ;if (dev->rx_resolution) features |=LIRC_CAN_GET_REC_RESOLUTION ; + node->rec_mode =LIRC_MODE_MODE2 ; }if (dev->tx_ir) { + node->send_mode =LIRC_MODE_PULSE ; features |=LIRC_CAN_SEND_PULSE |LIRC_CAN_SEND_SCANCODE ;if (dev->s_tx_mask) features |=LIRC_CAN_SET_TRANSMITTER_MASK ;
@@ -488,6 +558,7 @@ int ir_lirc_register(struct rc_dev *dev) drv->owner =THIS_MODULE ;INIT_KFIFO (node->rawir); +INIT_KFIFO (node->scancodes);init_waitqueue_head (&node->wait_poll); drv->minor =lirc_register_driver (drv);
drivers/media/rc/ir-mce_kbd-decoder.c +6 -0
@@ -215,6 +215,7 @@ static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)struct mce_kbd_dec *data = &dev->raw->mce_kbd;u32 scancode;unsigned long delay; +struct lirc_scancode lsc;if (!is_timing_event (ev)) {if (ev.reset)
@@ -326,18 +327,23 @@ static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)mod_timer (&data->rx_timeout, jiffies + delay);/* Pass data to keyboard buffer parser */ ir_mce_kbd_process_keyboard_data (data->idev, scancode); + lsc.rc_type =RC_TYPE_MCIR2_KBD ;break ;case MCIR2_MOUSE_NBITS : scancode = data->body &0x1fffff ;IR_dprintk (1 ,"mouse data 0x%06x\n" , scancode);/* Pass data to mouse buffer parser */ ir_mce_kbd_process_mouse_data (data->idev, scancode); + lsc.rc_type =RC_TYPE_MCIR2_MSE ;break ;default :IR_dprintk (1 ,"not keyboard or mouse data\n" ); goto out; } + lsc.scancode = scancode; + lsc.flags =0 ; +ir_lirc_scancode_event (dev, &lsc); data->state =STATE_INACTIVE ;input_event (data->idev,EV_MSC ,MSC_SCAN , scancode);input_sync (data->idev);
drivers/media/rc/rc-core-priv.h +5 -0
@@ -45,12 +45,14 @@ struct lirc_node {struct rc_dev *dev;int carrier_low; DECLARE_KFIFO(rawir, unsigned int, LIRCBUF_SIZE); + DECLARE_KFIFO(scancodes, struct lirc_scancode, 32);wait_queue_head_t wait_poll;ktime_t gap_start;u64 gap_duration;bool gap;bool send_timeout_reports;int send_mode; +int rec_mode; };struct ir_raw_event_ctrl {
@@ -282,11 +284,14 @@ void ir_raw_init(void);*/ #ifdef CONFIG_IR_LIRC_CODEC void ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev); +void ir_lirc_scancode_event (struct rc_dev *dev,struct lirc_scancode *lsc);int ir_lirc_register (struct rc_dev *dev);void ir_lirc_unregister (struct rc_dev *dev);#else static inline void ir_lirc_raw_event (struct rc_dev *dev,struct ir_raw_event ev) { } +static inline void ir_lirc_scancode_event (struct rc_dev *dev, +struct lirc_scancode *lsc) { }static inline int ir_lirc_register (struct rc_dev *dev) {return 0 ; }static inline void ir_lirc_unregister (struct rc_dev *dev) { }#endif
drivers/media/rc/rc-main.c +14 -0
@@ -614,6 +614,14 @@ static void ir_timer_keyup(unsigned long cookie)void rc_repeat (struct rc_dev *dev) {unsigned long flags; +struct lirc_scancode sc = { + .scancode = dev->last_scancode, + .rc_type = dev->last_protocol, + .flags =LIRC_SCANCODE_FLAG_REPEAT | + (dev->last_toggle ?LIRC_SCANCODE_FLAG_TOGGLE :0 ), + }; + +ir_lirc_scancode_event (dev, &sc);spin_lock_irqsave (&dev->keylock, flags);
@@ -649,6 +657,12 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol, dev->last_protocol != protocol || dev->last_scancode != scancode || dev->last_toggle != toggle); +struct lirc_scancode sc = { + .scancode = scancode, .rc_type = protocol, + .flags = toggle ?LIRC_SCANCODE_FLAG_TOGGLE :0 + }; + +ir_lirc_scancode_event (dev, &sc);if (new_event && dev->keypressed)ir_do_keyup (dev, false);
Signature · 1 line
2.9.3
A message that is not in the archive (sent off-list or not yet received): b9722d41efc7dd75ddbab78a62f654aa56d9a0a3.1488023302.git.sean-hENCXIMQXOg@public.gmane.org
Re: [PATCH v3 17/19] [media] lirc: implement reading scancode
Quoted 9 lines · Sean Young
drivers/media/rc/ir-lirc-codec.c +1
-3@@ -362,10 +394,15 @@ static unsigned int ir_lirc_poll(struct file *filep,poll_wait (filep, &lirc->wait_poll, wait); -if (!lirc->drv.attached) +if (!lirc->drv.attached) { events =POLLHUP ; -else if (!kfifo_is_empty (&lirc->rawir)) - events =POLLIN |POLLRDNORM ;
drivers/media/rc/ir-lirc-codec.c static unsigned int ir_lirc_poll(struct file *filep, · line 408
Quoted 10 lines
drivers/media/rc/ir-lirc-codec.c +7
-0+ }else if (lirc->rec_mode ==LIRC_MODE_SCANCODE ) { +if (!kfifo_is_empty (&lirc->rawir)) + events =POLLIN |POLLRDNORM ; + }else if (lirc->rec_mode ==LIRC_MODE_MODE2 ) { +if (!kfifo_is_empty (&lirc->scancodes)) + events =POLLIN |POLLRDNORM ; + }return events; }
So one issue with with this API change is if you want to poll for both raw IR and decoded scancodes. If poll were to return ready on raw IR and scancodes, existing code would not read the scancodes and end up in an infinite loop.
So poll only returns ready for the current mode (either raw IR or scancodes).
If you want to read for both scancodes and raw IR, either:
1) Poll in scancode mode for 200ms, Poll in rawir for 200ms. Repeat.
2) Allow multiple fds to be opened on /dev/lircN device and open two file descriptors, one in each mode (I want to add this to rc-core anyway).
3) Add an ioctl in which you can set the "poll" mask, e.g.:
unsigned mask = LIRC_MODE_MODE2 | LIRC_MODE_SCANCODE; ioctl(fd, LIRC_SET_POLL_MASK, &mask);
Sean
Sean Young
maintainerPATCH 1/1 lirc: introduce LIRC_SET_POLL_MODE
If you want to poll for both decoded scancodes and raw IR, then this ioctl will help you.
int fd = open("/dev/lirc0", O_RDONLY | O_NONBLOCK);
for (;;) {
unsigned mode = LIRC_MODE_SCANCODE | LIRC_MODE_MODE2;
ioctl(fd, LIRC_SET_POLL_MODE, &mode);
poll(&((struct pollfd){ .fd = fd, .events = POLLIN }), 1, -1);
mode = LIRC_MODE_SCANCODE;
ioctl(fd, LIRC_SET_REC_MODE, &mode);
struct lirc_scancode sc;
if (read(fd, &sc, sizeof(sc)) == sizeof(sc)) {
printf("scancode protocol:%d scancode:%llx\n",
sc.rc_type, sc.scancode);
}
mode = LIRC_MODE_MODE2;
ioctl(fd, LIRC_SET_REC_MODE, &mode);
unsigned sample;
if (read(fd, &sample, sizeof(sample)) == sizeof(sample)) {
if (LIRC_IS_SPACE(sample))
printf("space %u\n", LIRC_VAL(sample)));
if (LIRC_IS_PULSE(sample))
printf("pulse %u\n", LIRC_VAL(sample)));
}
}Note that LIRC_SET_REC_MODE will also affect the poll mode, so you must set it again before calling poll.
--- Documentation/media/uapi/rc/lirc-func.rst | 1 + Documentation/media/uapi/rc/lirc-set-poll-mode.rst | 44 ++++++++++++++++++++++ drivers/media/rc/ir-lirc-codec.c | 29 ++++++++++++-- drivers/media/rc/rc-core-priv.h | 1 + include/uapi/linux/lirc.h | 9 +++++ 5 files changed, 80 insertions(+), 4 deletions(-) create mode 100644 Documentation/media/uapi/rc/lirc-set-poll-mode.rst
Documentation/media/uapi/rc/lirc-func.rst +1 -0
@@ -26,3 +26,4 @@ LIRC Function Reference lirc-set-rec-timeout-reports lirc-set-measure-carrier-mode lirc-set-wideband-receiver + lirc-set-poll-mode
Documentation/media/uapi/rc/lirc-set-poll-mode.rst new file +44 -0
44 lines not on this page · raw message
drivers/media/rc/ir-lirc-codec.c +25 -4
@@ -258,6 +258,24 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd, } lirc->rec_mode = val; + lirc->poll_mode = val; +return 0 ; + +case LIRC_SET_POLL_MODE : +switch (dev->driver_type) { +case RC_DRIVER_SCANCODE : +if (val !=LIRC_MODE_SCANCODE ) +return -EINVAL ; +break ; +case RC_DRIVER_IR_RAW : +if (val & ~(LIRC_MODE_SCANCODE |LIRC_MODE_MODE2 )) +return -EINVAL ; +break ; +default : +return -ENOTTY ; + } + + lirc->poll_mode = val;return 0 ;case LIRC_GET_SEND_MODE :
@@ -396,11 +414,12 @@ static unsigned int ir_lirc_poll(struct file *filep,if (!lirc->drv.attached) { events =POLLHUP ; - }else if (lirc->rec_mode ==LIRC_MODE_SCANCODE ) { -if (!kfifo_is_empty (&lirc->scancodes)) + }else { +if ((lirc->poll_mode &LIRC_MODE_SCANCODE ) && + !kfifo_is_empty (&lirc->scancodes)) events =POLLIN |POLLRDNORM ; - }else if (lirc->rec_mode ==LIRC_MODE_MODE2 ) { -if (!kfifo_is_empty (&lirc->rawir)) +if ((lirc->poll_mode &LIRC_MODE_MODE2 ) && + !kfifo_is_empty (&lirc->rawir)) events =POLLIN |POLLRDNORM ; }
@@ -512,11 +531,13 @@ int ir_lirc_register(struct rc_dev *dev)if (dev->driver_type ==RC_DRIVER_SCANCODE ) { features |=LIRC_CAN_REC_SCANCODE ; + node->poll_mode =LIRC_MODE_SCANCODE ; node->rec_mode =LIRC_MODE_SCANCODE ; }else if (dev->driver_type ==RC_DRIVER_IR_RAW ) { features |=LIRC_CAN_REC_MODE2 |LIRC_CAN_REC_SCANCODE ;if (dev->rx_resolution) features |=LIRC_CAN_GET_REC_RESOLUTION ; + node->poll_mode =LIRC_MODE_MODE2 ; node->rec_mode =LIRC_MODE_MODE2 ; }if (dev->tx_ir) {
drivers/media/rc/rc-core-priv.h +1 -0
@@ -51,6 +51,7 @@ struct lirc_node {u64 gap_duration;bool gap;bool send_timeout_reports; +int poll_mode;int send_mode;int rec_mode; };
include/uapi/linux/lirc.h +9 -0
@@ -134,6 +134,15 @@#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)/* +* For raw IR devices, both raw IR (LIRC_MODE_MODE2) and decodes scancodes +* (LIRC_MODE_SCANCODE) can be read. By default, poll will show read +* ready for the last mode set by LIRC_SET_REC_MODE. Use LIRC_SET_POLL_MODE +* LIRC_MODE_SCANCODE | LIRC_MODE_MODE2 to show read ready for both +* modes. +*/ +#define LIRC_SET_POLL_MODE _IOW('i', 0x00000024, __u32) + +/* * struct lirc_scancode - decoded scancodes with protocol * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR * was decoded.
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 18/19 lirc: scancode rc devices should have a lirc device too
In reply to Sean YoungNow that the lirc interface supports scancodes, RC scancode devices can also have a lirc device, except for cec devices which have their own /dev/cecN interface.
--- drivers/media/rc/rc-main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/media/rc/rc-main.c +2 -2
@@ -1791,7 +1791,7 @@ int rc_register_device(struct rc_dev *dev) goto out_rx; } -if (dev->driver_type !=RC_DRIVER_SCANCODE ) { +if (dev->allowed_protocols !=RC_BIT_CEC ) { rc =ir_lirc_register (dev);if (rc <0 ) goto out_raw;
@@ -1856,7 +1856,7 @@ void rc_unregister_device(struct rc_dev *dev)if (dev->driver_type ==RC_DRIVER_IR_RAW )ir_raw_event_unregister (dev); -if (dev->driver_type !=RC_DRIVER_SCANCODE ) +if (dev->allowed_protocols !=RC_BIT_CEC )ir_lirc_unregister (dev);rc_free_rx_device (dev);
Signature · 1 line
2.9.3
Sean Young
maintainerPATCH v3 19/19 lirc: document LIRC_MODE_SCANCODE
In reply to Sean YoungLirc supports a new mode which requires documentation.
--- Documentation/media/lirc.h.rst.exceptions | 49 ++++++++++++++++++++++ Documentation/media/uapi/rc/lirc-dev-intro.rst | 25 +++++++++++ Documentation/media/uapi/rc/lirc-get-features.rst | 15 +++++++ Documentation/media/uapi/rc/lirc-get-rec-mode.rst | 8 ++-- Documentation/media/uapi/rc/lirc-get-send-mode.rst | 5 ++- Documentation/media/uapi/rc/lirc-read.rst | 6 +++ Documentation/media/uapi/rc/lirc-write.rst | 8 ++++ 7 files changed, 110 insertions(+), 6 deletions(-)
Documentation/media/lirc.h.rst.exceptions +49 -0
@@ -28,6 +28,55 @@ ignore define LIRC_CAN_SEND_MASK ignore define LIRC_CAN_REC_MASK ignore define LIRC_CAN_SET_REC_DUTY_CYCLE +# rc protocols + +ignore symbol RC_TYPE_UNKNOWN +ignore symbol RC_TYPE_OTHER +ignore symbol RC_TYPE_RC5 +ignore symbol RC_TYPE_RC5X_20 +ignore symbol RC_TYPE_RC5_SZ +ignore symbol RC_TYPE_JVC +ignore symbol RC_TYPE_SONY12 +ignore symbol RC_TYPE_SONY15 +ignore symbol RC_TYPE_SONY20 +ignore symbol RC_TYPE_NEC +ignore symbol RC_TYPE_NECX +ignore symbol RC_TYPE_NEC32 +ignore symbol RC_TYPE_SANYO +ignore symbol RC_TYPE_MCIR2_KBD +ignore symbol RC_TYPE_MCIR2_MSE +ignore symbol RC_TYPE_RC6_0 +ignore symbol RC_TYPE_RC6_6A_20 +ignore symbol RC_TYPE_RC6_6A_24 +ignore symbol RC_TYPE_RC6_6A_32 +ignore symbol RC_TYPE_RC6_MCE +ignore symbol RC_TYPE_SHARP +ignore symbol RC_TYPE_XMP +ignore symbol RC_TYPE_CEC +ignore symbol RC_TYPE_UNKNOWN +ignore symbol RC_TYPE_OTHER +ignore symbol RC_TYPE_RC5 +ignore symbol RC_TYPE_RC5X_20 +ignore symbol RC_TYPE_RC5_SZ +ignore symbol RC_TYPE_JVC +ignore symbol RC_TYPE_SONY12 +ignore symbol RC_TYPE_SONY15 +ignore symbol RC_TYPE_SONY20 +ignore symbol RC_TYPE_NEC +ignore symbol RC_TYPE_NECX +ignore symbol RC_TYPE_NEC32 +ignore symbol RC_TYPE_SANYO +ignore symbol RC_TYPE_MCIR2_KBD +ignore symbol RC_TYPE_MCIR2_MSE +ignore symbol RC_TYPE_RC6_0 +ignore symbol RC_TYPE_RC6_6A_20 +ignore symbol RC_TYPE_RC6_6A_24 +ignore symbol RC_TYPE_RC6_6A_32 +ignore symbol RC_TYPE_RC6_MCE +ignore symbol RC_TYPE_SHARP +ignore symbol RC_TYPE_XMP +ignore symbol RC_TYPE_CEC + # Undocumented macros ignore define PULSE_BIT
Documentation/media/uapi/rc/lirc-dev-intro.rst +25 -0
@@ -36,6 +36,31 @@ LIRC modes LIRC supports some modes of receiving and sending IR codes, as shown on the following table. +.. _lirc-mode-scancode: +.. _lirc-scancode-flag-toggle: +.. _lirc-scancode-flag-repeat: + +``LIRC_MODE_SCANCODE`` + + This mode is for both sending and receiving IR. + + For transmitting (aka sending), create a ``struct lirc_scancode`` with + the desired scancode set in the ``scancode`` member, ``rc_type`` set + the IR protocol, and ``flags`` set to 0. Write this to the lirc device. + + For receiving, you read ``struct lirc_scancode`` from the lirc device, + with ``scancode`` set to the received scancode in the IR protocol + ``rc_type``. The ``flags`` can have ``LIRC_SCANCODE_FLAG_TOGGLE`` set + if the toggle bit is set in protocols that support it (e.g. rc-5 and rc-6), + or ``LIRC_SCANCODE_FLAG_REPEAT`` for when a repeat is received for protocols + that support it (e.g. nec). + + The ``timestamp`` field is filled with the time nanoseconds + (in ``CLOCK_MONOTONIC``) when the scancode was decoded. + + An ``enum rc_type`` in the :ref:`lirc_header` lists all the supported + IR protocols. + .. _lirc-mode-mode2: ``LIRC_MODE_MODE2``
Documentation/media/uapi/rc/lirc-get-features.rst +15 -0
@@ -65,6 +65,14 @@ LIRC features The driver is capable of receiving using :ref:`LIRC_MODE_LIRCCODE <lirc-mode-LIRCCODE>`. +.. _LIRC-CAN-REC-SCANCODE: + +``LIRC_CAN_REC_SCANCODE`` + + The driver is capable of receiving using + :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>`. + + .. _LIRC-CAN-SET-SEND-CARRIER: ``LIRC_CAN_SET_SEND_CARRIER``
@@ -173,6 +181,13 @@ LIRC features The driver supports sending (also called as IR blasting or IR TX) using :ref:`LIRC_MODE_LIRCCODE <lirc-mode-LIRCCODE>`. +.. _LIRC-CAN-SEND-SCANCODE: + +``LIRC_CAN_SEND_SCANCODE`` + + The driver supports sending (also called as IR blasting or IR TX) using + :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>`. + Return Value ============
Documentation/media/uapi/rc/lirc-get-rec-mode.rst +4 -4
@@ -33,10 +33,10 @@ Arguments Description =========== -Get/set supported receive modes. Only :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` -and :ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` are supported for IR -receive. Use :ref:`lirc_get_features` to find out which modes the driver -supports. +Get/set supported receive modes. Only :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`, +:ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` and +:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported for IR +Use :ref:`lirc_get_features` to find out which modes the driver supports. Return Value ============
Documentation/media/uapi/rc/lirc-get-send-mode.rst +3 -2
@@ -36,8 +36,9 @@ Description Get/set current transmit mode. -Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and -:ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` is supported by for IR send, +Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`, +:ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` and +:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` is supported by for IR send, depending on the driver. Use :ref:`lirc_get_features` to find out which modes the driver supports.
Documentation/media/uapi/rc/lirc-read.rst +6 -0
@@ -54,6 +54,12 @@ The generally preferred mode for receive is in which packets containing an int value describing an IR signal are read from the chardev. +Alternatively, :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` might be available. +Some hardware only produces scancodes so this might be the only available mode. +In this mode, full decoded scancodes read from the chardev with their protocol +information. + + Return Value ============
Documentation/media/uapi/rc/lirc-write.rst +8 -0
@@ -55,6 +55,14 @@ samples. The write function must block until the data has been transmitted by the hardware. If more data is provided than the hardware can send, the driver returns ``EINVAL``. +When in :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` mode, one +``struct lirc_scancode`` must be written to the chardev. The ``flags`` +and ``timestamp`` members must be 0, and ``rc_type`` must be set to a +valid protocol. Set the desired scancode in the ``scancode`` member. If +there is no protocol encoder for the protocol or the scancode is not +valid for the specified protocol, ``EINVAL`` is returned. + + Return Value ============
Signature · 1 line
2.9.3