Skip to contentSkip to conversation

lirc scancode interface, and more

PATCH In review Sean Young 5 participants 39 messages Oct 10, 2017 – Dec 8, 2017

Subsystems (5)
lore
Share & tools
lore

Sean Young

author maintainer
#0 lore raw

v3 cover lirc scancode interface, and more

Introduce lirc scancode mode, use that to port lirc_zilog to rc-core using that interface, and then remove the lirc kernel api.

In summary:
- This removes the lirc staging directory.
- lirc IR TX can use in-kernel encoders for scancode encoding
- lirc_zilog uses the same interface
- lirc kapi (not uapi!) is gone
- The reading lirc scancode gives more information (e.g. protocol, toggle, repeat). So you can determine what protocol variant a remotes uses
- Line count is actually down and code cleaner (imo)

v2:
- Add MAINTAINERS entries
- Fixes for nec repeat
- Validate scancode for tx
- Minor bugfixes

v3:
- Review comments from Hans Verkuil
- Documented and fixed rc_validate_scancode()
- Fix a bug in kfifo on arm 32-bit
- this inferface won't be used for cec remote control passthrough

Sean Young (26):
media: lirc: implement scancode sending
media: lirc: use the correct carrier for scancode transmit
media: rc: auto load encoder if necessary
media: lirc_zilog: remove receiver
media: lirc_zilog: fix variable types and other ugliness
media: lirc_zilog: port to rc-core using scancode tx interface
media: promote lirc_zilog out of staging
media: lirc: remove LIRCCODE and LIRC_GET_LENGTH
media: lirc: lirc interface should not be a raw decoder
media: lirc: validate scancode for transmit
media: rc: document and fix rc_validate_scancode()
media: lirc: merge lirc_dev_fop_ioctl and ir_lirc_ioctl
media: lirc: use kfifo rather than lirc_buffer for raw IR
media: lirc: move lirc_dev->attached to rc_dev->registered
media: lirc: do not call rc_close() on unregistered devices
media: lirc: create rc-core open and close lirc functions
media: lirc: remove name from lirc_dev
media: lirc: remove last remnants of lirc kapi
media: lirc: implement reading scancode
media: rc: ensure lirc device receives nec repeats
media: lirc: document LIRC_MODE_SCANCODE
media: lirc: introduce LIRC_SET_POLL_MODES
media: lirc: scancode rc devices should have a lirc device too
media: MAINTAINERS: remove lirc staging area
media: MAINTAINERS: add entry for zilog_ir
kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit

 Documentation/media/kapi/rc-core.rst               |    5 -
 Documentation/media/lirc.h.rst.exceptions          |   31 +
 Documentation/media/uapi/rc/lirc-dev-intro.rst     |   68 +-
 Documentation/media/uapi/rc/lirc-func.rst          |    2 +-
 Documentation/media/uapi/rc/lirc-get-features.rst  |   17 +-
 Documentation/media/uapi/rc/lirc-get-length.rst    |   44 -
 Documentation/media/uapi/rc/lirc-get-rec-mode.rst  |    5 +-
 Documentation/media/uapi/rc/lirc-get-send-mode.rst |    2 +-
 Documentation/media/uapi/rc/lirc-read.rst          |   15 +-
 .../media/uapi/rc/lirc-set-poll-modes.rst          |   52 +
 Documentation/media/uapi/rc/lirc-write.rst         |   19 +-
 MAINTAINERS                                        |   12 +-
 drivers/media/rc/Kconfig                           |   41 +-
 drivers/media/rc/Makefile                          |    6 +-
 drivers/media/rc/ir-jvc-decoder.c                  |    1 +
 drivers/media/rc/ir-lirc-codec.c                   |  566 ++++---
 drivers/media/rc/ir-mce_kbd-decoder.c              |   12 +-
 drivers/media/rc/ir-nec-decoder.c                  |    1 +
 drivers/media/rc/ir-rc5-decoder.c                  |    1 +
 drivers/media/rc/ir-rc6-decoder.c                  |    1 +
 drivers/media/rc/ir-sanyo-decoder.c                |    1 +
 drivers/media/rc/ir-sharp-decoder.c                |    1 +
 drivers/media/rc/ir-sony-decoder.c                 |    1 +
 drivers/media/rc/lirc_dev.c                        |  489 +-----
 drivers/media/rc/rc-core-priv.h                    |   54 +-
 drivers/media/rc/rc-ir-raw.c                       |   56 +-
 drivers/media/rc/rc-main.c                         |  166 +-
 drivers/media/rc/zilog_ir.c                        |  742 +++++++++
 drivers/staging/media/Kconfig                      |    3 -
 drivers/staging/media/Makefile                     |    1 -
 drivers/staging/media/lirc/Kconfig                 |   21 -
 drivers/staging/media/lirc/Makefile                |    6 -
 drivers/staging/media/lirc/TODO                    |   36 -
 drivers/staging/media/lirc/lirc_zilog.c            | 1653 --------------------
 include/linux/kfifo.h                              |    3 +-
 include/media/lirc_dev.h                           |  192 ---
 include/media/rc-core.h                            |   55 +-
 include/media/rc-map.h                             |   54 +-
 include/uapi/linux/lirc.h                          |   91 ++
 39 files changed, 1734 insertions(+), 2792 deletions(-)
 delete mode 100644 Documentation/media/uapi/rc/lirc-get-length.rst
 create mode 100644 Documentation/media/uapi/rc/lirc-set-poll-modes.rst
 create mode 100644 drivers/media/rc/zilog_ir.c
 delete mode 100644 drivers/staging/media/lirc/Kconfig
 delete mode 100644 drivers/staging/media/lirc/Makefile
 delete mode 100644 drivers/staging/media/lirc/TODO
 delete mode 100644 drivers/staging/media/lirc/lirc_zilog.c
 delete mode 100644 include/media/lirc_dev.h
Signature · 1 line
2.13.6
author maintainer
#1 lore raw

PATCH v3 1/26 media: lirc: implement scancode sending

This introduces a new lirc mode: scancode. Any device which can send raw IR can now also send scancodes.

int main()

{
	int mode, fd = open("/dev/lirc0", O_RDWR);

        mode = LIRC_MODE_SCANCODE;
	if (ioctl(fd, LIRC_SET_SEND_MODE, &mode)) {
		// kernel too old or lirc does not support transmit
	}
	struct lirc_scancode scancode = {
		.scancode = 0x1e3d,
		.rc_proto = RC_PROTO_RC5,
	};
	write(fd, &scancode, sizeof(scancode));
	close(fd);
}

The other fields of lirc_scancode must be set to 0.

Note that toggle (rc5, rc6) and repeats (nec) are not implemented. Nor is there a method for holding down a key for a period.

---
 drivers/media/rc/ir-lirc-codec.c | 99 +++++++++++++++++++++++++++++-----------
 drivers/media/rc/rc-core-priv.h  |  2 +-
 include/media/rc-map.h           | 54 +---------------------
 include/uapi/linux/lirc.h        | 82 +++++++++++++++++++++++++++++++++
 4 files changed, 156 insertions(+), 81 deletions(-)
drivers/media/rc/ir-lirc-codec.c +72 -27
index 8f2f37412fc5..2c89b4474e31 100644
@@ -107,7 +107,8 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 {
 	struct lirc_codec *lirc;
 	struct rc_dev *dev;
-	unsigned int *txbuf; /* buffer with values to transmit */
+	unsigned int *txbuf = NULL;
+	struct ir_raw_event *raw = NULL;
 	ssize_t ret = -EINVAL;
 	size_t count;
 	ktime_t start;
@@ -121,16 +122,50 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 	if (!lirc)
 		return -EFAULT;
 
-	if (n < sizeof(unsigned) || n % sizeof(unsigned))
-		return -EINVAL;
+	if (lirc->send_mode == LIRC_MODE_SCANCODE) {
+		struct lirc_scancode scan;
 
-	count = n / sizeof(unsigned);
-	if (count > LIRCBUF_SIZE || count % 2 == 0)
-		return -EINVAL;
+		if (n != sizeof(scan))
+			return -EINVAL;
 
-	txbuf = memdup_user(buf, n);
-	if (IS_ERR(txbuf))
-		return PTR_ERR(txbuf);
+		if (copy_from_user(&scan, buf, sizeof(scan)))
+			return -EFAULT;
+
+		if (scan.flags || scan.keycode || scan.timestamp)
+			return -EINVAL;
+
+		raw = kmalloc_array(LIRCBUF_SIZE, sizeof(*raw), GFP_KERNEL);
+		if (!raw)
+			return -ENOMEM;
+
+		ret = ir_raw_encode_scancode(scan.rc_proto, scan.scancode,
+					     raw, LIRCBUF_SIZE);
+		if (ret < 0)
+			goto out;
+
+		count = ret;
+
+		txbuf = kmalloc_array(count, sizeof(unsigned int), GFP_KERNEL);
+		if (!txbuf) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		for (i = 0; i < count; i++)
+			/* Convert from NS to US */
+			txbuf[i] = DIV_ROUND_UP(raw[i].duration, 1000);
+	} else {
+		if (n < sizeof(unsigned int) || n % sizeof(unsigned int))
+			return -EINVAL;
+
+		count = n / sizeof(unsigned int);
+		if (count > LIRCBUF_SIZE || count % 2 == 0)
+			return -EINVAL;
+
+		txbuf = memdup_user(buf, n);
+		if (IS_ERR(txbuf))
+			return PTR_ERR(txbuf);
+	}
 
 	dev = lirc->dev;
 	if (!dev) {
@@ -156,24 +191,30 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 	if (ret < 0)
 		goto out;
 
-	for (duration = i = 0; i < ret; i++)
-		duration += txbuf[i];
-
-	ret *= sizeof(unsigned int);
-
-	/*
-	 * The lircd gap calculation expects the write function to
-	 * wait for the actual IR signal to be transmitted before
-	 * returning.
-	 */
-	towait = ktime_us_delta(ktime_add_us(start, duration), ktime_get());
-	if (towait > 0) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(usecs_to_jiffies(towait));
+	if (lirc->send_mode == LIRC_MODE_SCANCODE) {
+		ret = n;
+	} else {
+		for (duration = i = 0; i < ret; i++)
+			duration += txbuf[i];
+
+		ret *= sizeof(unsigned int);
+
+		/*
+		 * The lircd gap calculation expects the write function to
+		 * wait for the actual IR signal to be transmitted before
+		 * returning.
+		 */
+		towait = ktime_us_delta(ktime_add_us(start, duration),
+					ktime_get());
+		if (towait > 0) {
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(usecs_to_jiffies(towait));
+		}
 	}
 
 out:
 	kfree(txbuf);
+	kfree(raw);
 	return ret;
 }
 
@@ -202,20 +243,22 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 
 	switch (cmd) {
 
-	/* legacy support */
+	/* mode support */
 	case LIRC_GET_SEND_MODE:
 		if (!dev->tx_ir)
 			return -ENOTTY;
 
-		val = LIRC_MODE_PULSE;
+		val = lirc->send_mode;
 		break;
 
 	case LIRC_SET_SEND_MODE:
 		if (!dev->tx_ir)
 			return -ENOTTY;
 
-		if (val != LIRC_MODE_PULSE)
+		if (!(val == LIRC_MODE_PULSE || val == LIRC_MODE_SCANCODE))
 			return -EINVAL;
+
+		lirc->send_mode = val;
 		return 0;
 
 	/* TX settings */
@@ -361,7 +404,7 @@ static int ir_lirc_register(struct rc_dev *dev)
 	}
 
 	if (dev->tx_ir) {
-		features |= LIRC_CAN_SEND_PULSE;
+		features |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE;
 		if (dev->s_tx_mask)
 			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
 		if (dev->s_tx_carrier)
@@ -400,6 +443,8 @@ static int ir_lirc_register(struct rc_dev *dev)
 	if (rc < 0)
 		goto out;
 
+	dev->raw->lirc.send_mode = LIRC_MODE_PULSE;
+
 	dev->raw->lirc.ldev = ldev;
 	dev->raw->lirc.dev = dev;
 	return 0;
drivers/media/rc/rc-core-priv.h +1 -1
index ae4dd0c27731..43eabea9f152 100644
@@ -113,7 +113,7 @@ struct ir_raw_event_ctrl {
 		u64 gap_duration;
 		bool gap;
 		bool send_timeout_reports;
-
+		u8 send_mode;
 	} lirc;
 	struct xmp_dec {
 		int state;
include/media/rc-map.h +1 -53

60 lines not on this page · raw message

include/uapi/linux/lirc.h +82 -0

104 lines not on this page · raw message

Signature · 1 line
2.13.6
author maintainer
#2 lore raw

PATCH v3 2/26 media: lirc: use the correct carrier for scancode transmit

In reply to Sean Young

If the lirc device supports it, set the carrier for the protocol.

---
 drivers/media/rc/ir-jvc-decoder.c     |  1 +
 drivers/media/rc/ir-lirc-codec.c      |  7 +++++++
 drivers/media/rc/ir-mce_kbd-decoder.c |  1 +
 drivers/media/rc/ir-nec-decoder.c     |  1 +
 drivers/media/rc/ir-rc5-decoder.c     |  1 +
 drivers/media/rc/ir-rc6-decoder.c     |  1 +
 drivers/media/rc/ir-sanyo-decoder.c   |  1 +
 drivers/media/rc/ir-sharp-decoder.c   |  1 +
 drivers/media/rc/ir-sony-decoder.c    |  1 +
 drivers/media/rc/rc-core-priv.h       |  1 +
 drivers/media/rc/rc-ir-raw.c          | 30 ++++++++++++++++++++++++++++++
 include/media/rc-core.h               |  1 +
 12 files changed, 47 insertions(+)
drivers/media/rc/ir-jvc-decoder.c +1 -0
index e2bd68c42edf..2ae20dfc0e61 100644
@@ -212,6 +212,7 @@ static struct ir_raw_handler jvc_handler = {
 	.protocols	= RC_PROTO_BIT_JVC,
 	.decode		= ir_jvc_decode,
 	.encode		= ir_jvc_encode,
+	.carrier	= 38000,
 };
 
 static int __init ir_jvc_decode_init(void)
drivers/media/rc/ir-lirc-codec.c +7 -0
index 2c89b4474e31..a5369978e56f 100644
@@ -154,6 +154,13 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 		for (i = 0; i < count; i++)
 			/* Convert from NS to US */
 			txbuf[i] = DIV_ROUND_UP(raw[i].duration, 1000);
+
+		if (dev->s_tx_carrier) {
+			int carrier = ir_raw_encode_carrier(scan.rc_proto);
+
+			if (carrier > 0)
+				dev->s_tx_carrier(dev, carrier);
+		}
 	} else {
 		if (n < sizeof(unsigned int) || n % sizeof(unsigned int))
 			return -EINVAL;
drivers/media/rc/ir-mce_kbd-decoder.c +1 -0
index 7c572a643656..efa3b735dcc4 100644
@@ -474,6 +474,7 @@ static struct ir_raw_handler mce_kbd_handler = {
 	.encode		= ir_mce_kbd_encode,
 	.raw_register	= ir_mce_kbd_register,
 	.raw_unregister	= ir_mce_kbd_unregister,
+	.carrier	= 36000,
 };
 
 static int __init ir_mce_kbd_decode_init(void)
drivers/media/rc/ir-nec-decoder.c +1 -0
index a95d09acc22a..4ace5648866d 100644
@@ -264,6 +264,7 @@ static struct ir_raw_handler nec_handler = {
 							RC_PROTO_BIT_NEC32,
 	.decode		= ir_nec_decode,
 	.encode		= ir_nec_encode,
+	.carrier	= 38000,
 };
 
 static int __init ir_nec_decode_init(void)
drivers/media/rc/ir-rc5-decoder.c +1 -0
index 1292f534de43..cd1c4ee5fcd4 100644
@@ -282,6 +282,7 @@ static struct ir_raw_handler rc5_handler = {
 							RC_PROTO_BIT_RC5_SZ,
 	.decode		= ir_rc5_decode,
 	.encode		= ir_rc5_encode,
+	.carrier	= 36000,
 };
 
 static int __init ir_rc5_decode_init(void)
drivers/media/rc/ir-rc6-decoder.c +1 -0
index 5d0d2fe3b7a7..665025303c28 100644
@@ -408,6 +408,7 @@ static struct ir_raw_handler rc6_handler = {
 			  RC_PROTO_BIT_RC6_MCE,
 	.decode		= ir_rc6_decode,
 	.encode		= ir_rc6_encode,
+	.carrier	= 36000,
 };
 
 static int __init ir_rc6_decode_init(void)
drivers/media/rc/ir-sanyo-decoder.c +1 -0
index 758c60956850..723e7d75a593 100644
@@ -218,6 +218,7 @@ static struct ir_raw_handler sanyo_handler = {
 	.protocols	= RC_PROTO_BIT_SANYO,
 	.decode		= ir_sanyo_decode,
 	.encode		= ir_sanyo_encode,
+	.carrier	= 38000,
 };
 
 static int __init ir_sanyo_decode_init(void)
drivers/media/rc/ir-sharp-decoder.c +1 -0
index ed43a4212479..73174081e843 100644
@@ -226,6 +226,7 @@ static struct ir_raw_handler sharp_handler = {
 	.protocols	= RC_PROTO_BIT_SHARP,
 	.decode		= ir_sharp_decode,
 	.encode		= ir_sharp_encode,
+	.carrier	= 38000,
 };
 
 static int __init ir_sharp_decode_init(void)
drivers/media/rc/ir-sony-decoder.c +1 -0
index a47ced763031..e4bcff21c025 100644
@@ -221,6 +221,7 @@ static struct ir_raw_handler sony_handler = {
 							RC_PROTO_BIT_SONY20,
 	.decode		= ir_sony_decode,
 	.encode		= ir_sony_encode,
+	.carrier	= 40000,
 };
 
 static int __init ir_sony_decode_init(void)
drivers/media/rc/rc-core-priv.h +1 -0
index 43eabea9f152..3cf09408df6c 100644
@@ -29,6 +29,7 @@ struct ir_raw_handler {
 	int (*decode)(struct rc_dev *dev, struct ir_raw_event event);
 	int (*encode)(enum rc_proto protocol, u32 scancode,
 		      struct ir_raw_event *events, unsigned int max);
+	u32 carrier;
 
 	/* These two should only be used by the lirc decoder */
 	int (*raw_register)(struct rc_dev *dev);
drivers/media/rc/rc-ir-raw.c +30 -0
index 503bc425a187..0814e08a280b 100644
@@ -492,6 +492,36 @@ static void edge_handle(unsigned long arg)
 	ir_raw_event_handle(dev);
 }
 
+/**
+ * ir_raw_encode_carrier() - Get carrier used for protocol
+ *
+ * @protocol:		protocol
+ *
+ * Attempts to find the carrier for the specified protocol
+ *
+ * Returns:	The carrier in Hz
+ *		-EINVAL if the protocol is invalid, or if no
+ *		compatible encoder was found.
+ */
+int ir_raw_encode_carrier(enum rc_proto protocol)
+{
+	struct ir_raw_handler *handler;
+	int ret = -EINVAL;
+	u64 mask = BIT_ULL(protocol);
+
+	mutex_lock(&ir_raw_handler_lock);
+	list_for_each_entry(handler, &ir_raw_handler_list, list) {
+		if (handler->protocols & mask && handler->encode) {
+			ret = handler->carrier;
+			break;
+		}
+	}
+	mutex_unlock(&ir_raw_handler_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(ir_raw_encode_carrier);
+
 /*
  * Used to (un)register raw event clients
  */
include/media/rc-core.h +1 -0
index 314a1edb6189..ca48632ec8e2 100644
@@ -309,6 +309,7 @@ int ir_raw_event_store_with_filter(struct rc_dev *dev,
 void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
 int ir_raw_encode_scancode(enum rc_proto protocol, u32 scancode,
 			   struct ir_raw_event *events, unsigned int max);
+int ir_raw_encode_carrier(enum rc_proto protocol);
 
 static inline void ir_raw_event_reset(struct rc_dev *dev)
 {
Signature · 1 line
2.13.6
author maintainer
#3 lore raw

PATCH v3 3/26 media: rc: auto load encoder if necessary

In reply to Sean Young

When sending scancodes, load the encoder if we need it.

---
 drivers/media/rc/rc-core-priv.h | 1 +
 drivers/media/rc/rc-ir-raw.c    | 2 ++
 drivers/media/rc/rc-main.c      | 2 +-
 3 files changed, 4 insertions(+), 1 deletion(-)
drivers/media/rc/rc-core-priv.h +1 -0
index 3cf09408df6c..d29b1b1ef4b7 100644
@@ -271,6 +271,7 @@ void ir_raw_event_free(struct rc_dev *dev);
 void ir_raw_event_unregister(struct rc_dev *dev);
 int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
+void ir_raw_load_modules(u64 *protocols);
 void ir_raw_init(void);
 
 /*
drivers/media/rc/rc-ir-raw.c +2 -0
index 0814e08a280b..b84201cb012a 100644
@@ -457,6 +457,8 @@ int ir_raw_encode_scancode(enum rc_proto protocol, u32 scancode,
 	int ret = -EINVAL;
 	u64 mask = 1ULL << protocol;
 
+	ir_raw_load_modules(&mask);
+
 	mutex_lock(&ir_raw_handler_lock);
 	list_for_each_entry(handler, &ir_raw_handler_list, list) {
 		if (handler->protocols & mask && handler->encode) {
drivers/media/rc/rc-main.c +1 -1
index cb78e5702bef..62102b3ef5aa 100644
@@ -1081,7 +1081,7 @@ static int parse_protocol_change(u64 *protocols, const char *buf)
 	return count;
 }
 
-static void ir_raw_load_modules(u64 *protocols)
+void ir_raw_load_modules(u64 *protocols)
 {
 	u64 available;
 	int i, ret;
Signature · 1 line
2.13.6
author maintainer
#4 lore raw

PATCH v3 4/26 media: lirc_zilog: remove receiver

In reply to Sean Young

The ir-kbd-i2c module already handles this very well.

---
 drivers/staging/media/lirc/lirc_zilog.c | 901 +++-----------------------------
 1 file changed, 76 insertions(+), 825 deletions(-)
drivers/staging/media/lirc/lirc_zilog.c +76 -825
index 6bd0717bf76e..757b3fc247ac 100644
@@ -64,28 +64,7 @@
 /* Max transfer size done by I2C transfer functions */
 #define MAX_XFER_SIZE  64
 
-struct IR;
-
-struct IR_rx {
-	struct kref ref;
-	struct IR *ir;
-
-	/* RX device */
-	struct mutex client_lock;
-	struct i2c_client *c;
-
-	/* RX polling thread data */
-	struct task_struct *task;
-
-	/* RX read data */
-	unsigned char b[3];
-	bool hdpvr_data_fmt;
-};
-
 struct IR_tx {
-	struct kref ref;
-	struct IR *ir;
-
 	/* TX device */
 	struct mutex client_lock;
 	struct i2c_client *c;
@@ -93,39 +72,9 @@ struct IR_tx {
 	/* TX additional actions needed */
 	int need_boot;
 	bool post_tx_ready_poll;
-};
-
-struct IR {
-	struct kref ref;
-	struct list_head list;
-
-	/* FIXME spinlock access to l->features */
 	struct lirc_dev *l;
-	struct lirc_buffer rbuf;
-
-	struct mutex ir_lock;
-	atomic_t open_count;
-
-	struct device *dev;
-	struct i2c_adapter *adapter;
-
-	spinlock_t rx_ref_lock; /* struct IR_rx kref get()/put() */
-	struct IR_rx *rx;
-
-	spinlock_t tx_ref_lock; /* struct IR_tx kref get()/put() */
-	struct IR_tx *tx;
 };
 
-/* IR transceiver instance object list */
-/*
- * This lock is used for the following:
- * a. ir_devices_list access, insertions, deletions
- * b. struct IR kref get()s and put()s
- * c. serialization of ir_probe() for the two i2c_clients for a Z8
- */
-static DEFINE_MUTEX(ir_devices_lock);
-static LIST_HEAD(ir_devices_list);
-
 /* Block size for IR transmitter */
 #define TX_BLOCK_SIZE	99
 
@@ -153,348 +102,8 @@ struct tx_data_struct {
 static struct tx_data_struct *tx_data;
 static struct mutex tx_data_lock;
 
-
 /* module parameters */
 static bool debug;	/* debug output */
-static bool tx_only;	/* only handle the IR Tx function */
-
-
-/* struct IR reference counting */
-static struct IR *get_ir_device(struct IR *ir, bool ir_devices_lock_held)
-{
-	if (ir_devices_lock_held) {
-		kref_get(&ir->ref);
-	} else {
-		mutex_lock(&ir_devices_lock);
-		kref_get(&ir->ref);
-		mutex_unlock(&ir_devices_lock);
-	}
-	return ir;
-}
-
-static void release_ir_device(struct kref *ref)
-{
-	struct IR *ir = container_of(ref, struct IR, ref);
-
-	/*
-	 * Things should be in this state by now:
-	 * ir->rx set to NULL and deallocated - happens before ir->rx->ir put()
-	 * ir->rx->task kthread stopped - happens before ir->rx->ir put()
-	 * ir->tx set to NULL and deallocated - happens before ir->tx->ir put()
-	 * ir->open_count ==  0 - happens on final close()
-	 * ir_lock, tx_ref_lock, rx_ref_lock, all released
-	 */
-	if (ir->l)
-		lirc_unregister_device(ir->l);
-
-	if (kfifo_initialized(&ir->rbuf.fifo))
-		lirc_buffer_free(&ir->rbuf);
-	list_del(&ir->list);
-	kfree(ir);
-}
-
-static int put_ir_device(struct IR *ir, bool ir_devices_lock_held)
-{
-	int released;
-
-	if (ir_devices_lock_held)
-		return kref_put(&ir->ref, release_ir_device);
-
-	mutex_lock(&ir_devices_lock);
-	released = kref_put(&ir->ref, release_ir_device);
-	mutex_unlock(&ir_devices_lock);
-
-	return released;
-}
-
-/* struct IR_rx reference counting */
-static struct IR_rx *get_ir_rx(struct IR *ir)
-{
-	struct IR_rx *rx;
-
-	spin_lock(&ir->rx_ref_lock);
-	rx = ir->rx;
-	if (rx)
-		kref_get(&rx->ref);
-	spin_unlock(&ir->rx_ref_lock);
-	return rx;
-}
-
-static void destroy_rx_kthread(struct IR_rx *rx, bool ir_devices_lock_held)
-{
-	/* end up polling thread */
-	if (!IS_ERR_OR_NULL(rx->task)) {
-		kthread_stop(rx->task);
-		rx->task = NULL;
-		/* Put the ir ptr that ir_probe() gave to the rx poll thread */
-		put_ir_device(rx->ir, ir_devices_lock_held);
-	}
-}
-
-static void release_ir_rx(struct kref *ref)
-{
-	struct IR_rx *rx = container_of(ref, struct IR_rx, ref);
-	struct IR *ir = rx->ir;
-
-	/*
-	 * This release function can't do all the work, as we want
-	 * to keep the rx_ref_lock a spinlock, and killing the poll thread
-	 * and releasing the ir reference can cause a sleep.  That work is
-	 * performed by put_ir_rx()
-	 */
-	ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-	/* Don't put_ir_device(rx->ir) here; lock can't be freed yet */
-	ir->rx = NULL;
-	/* Don't do the kfree(rx) here; we still need to kill the poll thread */
-}
-
-static int put_ir_rx(struct IR_rx *rx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = rx->ir;
-
-	spin_lock(&ir->rx_ref_lock);
-	released = kref_put(&rx->ref, release_ir_rx);
-	spin_unlock(&ir->rx_ref_lock);
-	/* Destroy the rx kthread while not holding the spinlock */
-	if (released) {
-		destroy_rx_kthread(rx, ir_devices_lock_held);
-		kfree(rx);
-		/* Make sure we're not still in a poll_table somewhere */
-		wake_up_interruptible(&ir->rbuf.wait_poll);
-	}
-	/* Do a reference put() for the rx->ir reference, if we released rx */
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-/* struct IR_tx reference counting */
-static struct IR_tx *get_ir_tx(struct IR *ir)
-{
-	struct IR_tx *tx;
-
-	spin_lock(&ir->tx_ref_lock);
-	tx = ir->tx;
-	if (tx)
-		kref_get(&tx->ref);
-	spin_unlock(&ir->tx_ref_lock);
-	return tx;
-}
-
-static void release_ir_tx(struct kref *ref)
-{
-	struct IR_tx *tx = container_of(ref, struct IR_tx, ref);
-	struct IR *ir = tx->ir;
-
-	ir->l->features &= ~LIRC_CAN_SEND_LIRCCODE;
-	/* Don't put_ir_device(tx->ir) here, so our lock doesn't get freed */
-	ir->tx = NULL;
-	kfree(tx);
-}
-
-static int put_ir_tx(struct IR_tx *tx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = tx->ir;
-
-	spin_lock(&ir->tx_ref_lock);
-	released = kref_put(&tx->ref, release_ir_tx);
-	spin_unlock(&ir->tx_ref_lock);
-	/* Do a reference put() for the tx->ir reference, if we released tx */
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-static int add_to_buf(struct IR *ir)
-{
-	__u16 code;
-	unsigned char codes[2];
-	unsigned char keybuf[6];
-	int got_data = 0;
-	int ret;
-	int failures = 0;
-	unsigned char sendbuf[1] = { 0 };
-	struct lirc_buffer *rbuf = ir->l->buf;
-	struct IR_rx *rx;
-	struct IR_tx *tx;
-
-	if (lirc_buffer_full(rbuf)) {
-		dev_dbg(ir->dev, "buffer overflow\n");
-		return -EOVERFLOW;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/* Ensure our rx->c i2c_client remains valid for the duration */
-	mutex_lock(&rx->client_lock);
-	if (!rx->c) {
-		mutex_unlock(&rx->client_lock);
-		put_ir_rx(rx, false);
-		return -ENXIO;
-	}
-
-	tx = get_ir_tx(ir);
-
-	/*
-	 * service the device as long as it is returning
-	 * data and we have space
-	 */
-	do {
-		if (kthread_should_stop()) {
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Lock i2c bus for the duration.  RX/TX chips interfere so
-		 * this is worth it
-		 */
-		mutex_lock(&ir->ir_lock);
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Send random "poll command" (?)  Windows driver does this
-		 * and it is a good point to detect chip failure.
-		 */
-		ret = i2c_master_send(rx->c, sendbuf, 1);
-		if (ret != 1) {
-			dev_err(ir->dev, "i2c_master_send failed with %d\n",
-				ret);
-			if (failures >= 3) {
-				mutex_unlock(&ir->ir_lock);
-				dev_err(ir->dev,
-					"unable to read from the IR chip after 3 resets, giving up\n");
-				break;
-			}
-
-			/* Looks like the chip crashed, reset it */
-			dev_err(ir->dev,
-				"polling the IR receiver chip failed, trying reset\n");
-
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			if (kthread_should_stop()) {
-				mutex_unlock(&ir->ir_lock);
-				ret = -ENODATA;
-				break;
-			}
-			schedule_timeout((100 * HZ + 999) / 1000);
-			if (tx)
-				tx->need_boot = 1;
-
-			++failures;
-			mutex_unlock(&ir->ir_lock);
-			ret = 0;
-			continue;
-		}
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-		ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf));
-		mutex_unlock(&ir->ir_lock);
-		if (ret != sizeof(keybuf)) {
-			dev_err(ir->dev,
-				"i2c_master_recv failed with %d -- keeping last read buffer\n",
-				ret);
-		} else {
-			rx->b[0] = keybuf[3];
-			rx->b[1] = keybuf[4];
-			rx->b[2] = keybuf[5];
-			dev_dbg(ir->dev,
-				"key (0x%02x/0x%02x)\n",
-				rx->b[0], rx->b[1]);
-		}
-
-		/* key pressed ? */
-		if (rx->hdpvr_data_fmt) {
-			if (got_data && (keybuf[0] == 0x80)) {
-				ret = 0;
-				break;
-			} else if (got_data && (keybuf[0] == 0x00)) {
-				ret = -ENODATA;
-				break;
-			}
-		} else if ((rx->b[0] & 0x80) == 0) {
-			ret = got_data ? 0 : -ENODATA;
-			break;
-		}
-
-		/* look what we have */
-		code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1] >> 2);
-
-		codes[0] = (code >> 8) & 0xff;
-		codes[1] = code & 0xff;
-
-		/* return it */
-		lirc_buffer_write(rbuf, codes);
-		++got_data;
-		ret = 0;
-	} while (!lirc_buffer_full(rbuf));
-
-	mutex_unlock(&rx->client_lock);
-	if (tx)
-		put_ir_tx(tx, false);
-	put_ir_rx(rx, false);
-	return ret;
-}
-
-/*
- * Main function of the polling thread -- from lirc_dev.
- * We don't fit the LIRC model at all anymore.  This is horrible, but
- * basically we have a single RX/TX device with a nasty failure mode
- * that needs to be accounted for across the pair.  lirc lets us provide
- * fops, but prevents us from using the internal polling, etc. if we do
- * so.  Hence the replication.  Might be neater to extend the LIRC model
- * to account for this but I'd think it's a very special case of seriously
- * messed up hardware.
- */
-static int lirc_thread(void *arg)
-{
-	struct IR *ir = arg;
-	struct lirc_buffer *rbuf = ir->l->buf;
-
-	dev_dbg(ir->dev, "poll thread started\n");
-
-	while (!kthread_should_stop()) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		/* if device not opened, we can sleep half a second */
-		if (atomic_read(&ir->open_count) == 0) {
-			schedule_timeout(HZ / 2);
-			continue;
-		}
-
-		/*
-		 * This is ~113*2 + 24 + jitter (2*repeat gap + code length).
-		 * We use this interval as the chip resets every time you poll
-		 * it (bad!).  This is therefore just sufficient to catch all
-		 * of the button presses.  It makes the remote much more
-		 * responsive.  You can see the difference by running irw and
-		 * holding down a button.  With 100ms, the old polling
-		 * interval, you'll notice breaks in the repeat sequence
-		 * corresponding to lost keypresses.
-		 */
-		schedule_timeout((260 * HZ) / 1000);
-		if (kthread_should_stop())
-			break;
-		if (!add_to_buf(ir))
-			wake_up_interruptible(&rbuf->wait_poll);
-	}
-
-	dev_dbg(ir->dev, "poll thread ended\n");
-	return 0;
-}
 
 /* safe read of a uint32 (always network byte order) */
 static int read_uint32(unsigned char **data,
@@ -645,10 +254,10 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
 		buf[0] = (unsigned char)(i + 1);
 		for (j = 0; j < tosend; ++j)
 			buf[1 + j] = data_block[i + j];
-		dev_dbg(tx->ir->dev, "%*ph", 5, buf);
+		dev_dbg(&tx->l->dev, "%*ph", 5, buf);
 		ret = i2c_master_send(tx->c, buf, tosend + 1);
 		if (ret != tosend + 1) {
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"i2c_master_send failed with %d\n", ret);
 			return ret < 0 ? ret : -EFAULT;
 		}
@@ -673,7 +282,7 @@ static int send_boot_data(struct IR_tx *tx)
 	buf[1] = 0x20;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
@@ -690,22 +299,22 @@ static int send_boot_data(struct IR_tx *tx)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Here comes the firmware version... (hopefully) */
 	ret = i2c_master_recv(tx->c, buf, 4);
 	if (ret != 4) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with %d\n", ret);
 		return 0;
 	}
 	if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
-		dev_err(tx->ir->dev, "unexpected IR TX init response: %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX init response: %02x\n",
 			buf[0]);
 		return 0;
 	}
-	dev_notice(tx->ir->dev,
+	dev_notice(&tx->l->dev,
 		   "Zilog/Hauppauge IR blaster firmware version %d.%d.%d loaded\n",
 		   buf[1], buf[2], buf[3]);
 
@@ -750,15 +359,15 @@ static int fw_load(struct IR_tx *tx)
 	}
 
 	/* Request codeset data file */
-	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", tx->ir->dev);
+	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->l->dev);
 	if (ret != 0) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"firmware haup-ir-blaster.bin not available (%d)\n",
 			ret);
 		ret = ret < 0 ? ret : -EFAULT;
 		goto out;
 	}
-	dev_dbg(tx->ir->dev, "firmware of size %zu loaded\n", fw_entry->size);
+	dev_dbg(&tx->l->dev, "firmware of size %zu loaded\n", fw_entry->size);
 
 	/* Parse the file */
 	tx_data = vmalloc(sizeof(*tx_data));
@@ -786,7 +395,7 @@ static int fw_load(struct IR_tx *tx)
 	if (!read_uint8(&data, tx_data->endp, &version))
 		goto corrupt;
 	if (version != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"unsupported code set file version (%u, expected 1) -- please upgrade to a newer driver\n",
 			version);
 		fw_unload_locked();
@@ -803,7 +412,7 @@ static int fw_load(struct IR_tx *tx)
 			 &tx_data->num_code_sets))
 		goto corrupt;
 
-	dev_dbg(tx->ir->dev, "%u IR blaster codesets loaded\n",
+	dev_dbg(&tx->l->dev, "%u IR blaster codesets loaded\n",
 		tx_data->num_code_sets);
 
 	tx_data->code_sets = vmalloc(
@@ -868,7 +477,7 @@ static int fw_load(struct IR_tx *tx)
 	goto out;
 
 corrupt:
-	dev_err(tx->ir->dev, "firmware is corrupt\n");
+	dev_err(&tx->l->dev, "firmware is corrupt\n");
 	fw_unload_locked();
 	ret = -EFAULT;
 
@@ -877,94 +486,6 @@ static int fw_load(struct IR_tx *tx)
 	return ret;
 }
 
-/* copied from lirc_dev */
-static ssize_t read(struct file *filep, char __user *outbuf, size_t n,
-		    loff_t *ppos)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	int ret = 0, written = 0, retries = 0;
-	unsigned int m;
-	DECLARE_WAITQUEUE(wait, current);
-
-	dev_dbg(ir->dev, "read called\n");
-	if (n % rbuf->chunk_size) {
-		dev_dbg(ir->dev, "read result = -EINVAL\n");
-		return -EINVAL;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/*
-	 * we add ourselves to the task queue before buffer check
-	 * to avoid losing scan code (in case when queue is awaken somewhere
-	 * between while condition checking and scheduling)
-	 */
-	add_wait_queue(&rbuf->wait_poll, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	/*
-	 * while we didn't provide 'length' bytes, device is opened in blocking
-	 * mode and 'copy_to_user' is happy, wait for data.
-	 */
-	while (written < n && ret == 0) {
-		if (lirc_buffer_empty(rbuf)) {
-			/*
-			 * According to the read(2) man page, 'written' can be
-			 * returned as less than 'n', instead of blocking
-			 * again, returning -EWOULDBLOCK, or returning
-			 * -ERESTARTSYS
-			 */
-			if (written)
-				break;
-			if (filep->f_flags & O_NONBLOCK) {
-				ret = -EWOULDBLOCK;
-				break;
-			}
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-		} else {
-			unsigned char buf[MAX_XFER_SIZE];
-
-			if (rbuf->chunk_size > sizeof(buf)) {
-				dev_err(ir->dev,
-					"chunk_size is too big (%d)!\n",
-					rbuf->chunk_size);
-				ret = -EINVAL;
-				break;
-			}
-			m = lirc_buffer_read(rbuf, buf);
-			if (m == rbuf->chunk_size) {
-				ret = copy_to_user(outbuf + written, buf,
-						   rbuf->chunk_size);
-				written += rbuf->chunk_size;
-			} else {
-				retries++;
-			}
-			if (retries >= 5) {
-				dev_err(ir->dev, "Buffer read failed!\n");
-				ret = -EIO;
-			}
-		}
-	}
-
-	remove_wait_queue(&rbuf->wait_poll, &wait);
-	put_ir_rx(rx, false);
-	set_current_state(TASK_RUNNING);
-
-	dev_dbg(ir->dev, "read result = %d (%s)\n", ret,
-		ret ? "Error" : "OK");
-
-	return ret ? ret : written;
-}
-
 /* send a keypress to the IR TX device */
 static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 {
@@ -976,7 +497,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 	ret = get_key_data(data_block, code, key);
 
 	if (ret == -EPROTO) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"failed to get data for code %u, key %u -- check lircd.conf entries\n",
 			code, key);
 		return ret;
@@ -994,7 +515,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 	buf[1] = 0x40;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
@@ -1007,18 +528,18 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Send finished download? */
 	ret = i2c_master_recv(tx->c, buf, 1);
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 	if (buf[0] != 0xA0) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #1: %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX response #1: %02x\n",
 			buf[0]);
 		return -EFAULT;
 	}
@@ -1028,7 +549,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 	buf[1] = 0x80;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
@@ -1038,7 +559,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 	 * going to skip this whole mess and say we're done on the HD PVR
 	 */
 	if (!tx->post_tx_ready_poll) {
-		dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code, key);
+		dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code, key);
 		return 0;
 	}
 
@@ -1054,12 +575,12 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 		ret = i2c_master_send(tx->c, buf, 1);
 		if (ret == 1)
 			break;
-		dev_dbg(tx->ir->dev,
+		dev_dbg(&tx->l->dev,
 			"NAK expected: i2c_master_send failed with %d (try %d)\n",
 			ret, i + 1);
 	}
 	if (ret != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"IR TX chip never got ready: last i2c_master_send failed with %d\n",
 			ret);
 		return ret < 0 ? ret : -EFAULT;
@@ -1068,17 +589,17 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 	/* Seems to be an 'ok' response */
 	i = i2c_master_recv(tx->c, buf, 1);
 	if (i != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with %d\n", ret);
 		return -EFAULT;
 	}
 	if (buf[0] != 0x80) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #2: %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX response #2: %02x\n",
 			buf[0]);
 		return -EFAULT;
 	}
 
 	/* Oh good, it worked */
-	dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code, key);
+	dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code, key);
 	return 0;
 }
 
@@ -1091,8 +612,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 		     loff_t *ppos)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_tx *tx;
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	size_t i;
 	int failures = 0;
 
@@ -1100,31 +620,20 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 	if (n % sizeof(int))
 		return -EINVAL;
 
-	/* Get a struct IR_tx reference */
-	tx = get_ir_tx(ir);
-	if (!tx)
-		return -ENXIO;
-
 	/* Ensure our tx->c i2c_client remains valid for the duration */
 	mutex_lock(&tx->client_lock);
 	if (!tx->c) {
 		mutex_unlock(&tx->client_lock);
-		put_ir_tx(tx, false);
 		return -ENXIO;
 	}
 
-	/* Lock i2c bus for the duration */
-	mutex_lock(&ir->ir_lock);
-
 	/* Send each keypress */
 	for (i = 0; i < n;) {
 		int ret = 0;
 		int command;
 
 		if (copy_from_user(&command, buf + i, sizeof(command))) {
-			mutex_unlock(&ir->ir_lock);
 			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
 			return -EFAULT;
 		}
 
@@ -1133,9 +642,7 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 			/* Make sure we have the 'firmware' loaded, first */
 			ret = fw_load(tx);
 			if (ret != 0) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
 				if (ret != -ENOMEM)
 					ret = -EIO;
 				return ret;
@@ -1151,9 +658,7 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 			ret = send_code(tx, (unsigned int)command >> 16,
 					    (unsigned int)command & 0xFFFF);
 			if (ret == -EPROTO) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
 				return ret;
 			}
 		}
@@ -1164,15 +669,13 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 		 */
 		if (ret != 0) {
 			/* Looks like the chip crashed, reset it */
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"sending to the IR transmitter chip failed, trying reset\n");
 
 			if (failures >= 3) {
-				dev_err(tx->ir->dev,
+				dev_err(&tx->l->dev,
 					"unable to send to the IR chip after 3 resets, giving up\n");
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
 				return ret;
 			}
 			set_current_state(TASK_UNINTERRUPTIBLE);
@@ -1184,60 +687,21 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 		}
 	}
 
-	/* Release i2c bus */
-	mutex_unlock(&ir->ir_lock);
-
 	mutex_unlock(&tx->client_lock);
 
-	/* Give back our struct IR_tx reference */
-	put_ir_tx(tx, false);
-
 	/* All looks good */
 	return n;
 }
 
-/* copied from lirc_dev */
-static unsigned int poll(struct file *filep, poll_table *wait)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	unsigned int ret;
-
-	dev_dbg(ir->dev, "%s called\n", __func__);
-
-	rx = get_ir_rx(ir);
-	if (!rx) {
-		/*
-		 * Revisit this, if our poll function ever reports writeable
-		 * status for Tx
-		 */
-		dev_dbg(ir->dev, "%s result = POLLERR\n", __func__);
-		return POLLERR;
-	}
-
-	/*
-	 * Add our lirc_buffer's wait_queue to the poll_table. A wake up on
-	 * that buffer's wait queue indicates we may have a new poll status.
-	 */
-	poll_wait(filep, &rbuf->wait_poll, wait);
-
-	/* Indicate what ops could happen immediately without blocking */
-	ret = lirc_buffer_empty(rbuf) ? 0 : (POLLIN | POLLRDNORM);
-
-	dev_dbg(ir->dev, "%s result = %s\n", __func__,
-		ret ? "POLLIN|POLLRDNORM" : "none");
-	return ret;
-}
 
 static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 {
-	struct IR *ir = lirc_get_pdata(filep);
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	unsigned long __user *uptr = (unsigned long __user *)arg;
 	int result;
 	unsigned long mode, features;
 
-	features = ir->l->features;
+	features = tx->l->features;
 
 	switch (cmd) {
 	case LIRC_GET_LENGTH:
@@ -1287,13 +751,7 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
  */
 static int open(struct inode *node, struct file *filep)
 {
-	struct IR *ir;
-
 	lirc_init_pdata(node, filep);
-	ir = lirc_get_pdata(filep);
-
-	atomic_inc(&ir->open_count);
-
 	nonseekable_open(node, filep);
 	return 0;
 }
@@ -1301,25 +759,16 @@ static int open(struct inode *node, struct file *filep)
 /* Close the IR device */
 static int close(struct inode *node, struct file *filep)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-
-	atomic_dec(&ir->open_count);
-
-	put_ir_device(ir, false);
 	return 0;
 }
 
-static int ir_remove(struct i2c_client *client);
 static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
 
-#define ID_FLAG_TX	0x01
-#define ID_FLAG_HDPVR	0x02
+#define ID_FLAG_HDPVR	0x01
 
 static const struct i2c_device_id ir_transceiver_id[] = {
-	{ "ir_tx_z8f0811_haup",  ID_FLAG_TX                 },
-	{ "ir_rx_z8f0811_haup",  0                          },
-	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR | ID_FLAG_TX },
-	{ "ir_rx_z8f0811_hdpvr", ID_FLAG_HDPVR              },
+	{ "ir_tx_z8f0811_haup",  0 },
+	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ir_transceiver_id);
@@ -1329,16 +778,13 @@ static struct i2c_driver driver = {
 		.name	= "Zilog/Hauppauge i2c IR",
 	},
 	.probe		= ir_probe,
-	.remove		= ir_remove,
 	.id_table	= ir_transceiver_id,
 };
 
 static const struct file_operations lirc_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.read		= read,
 	.write		= write,
-	.poll		= poll,
 	.unlocked_ioctl	= ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ioctl,
@@ -1347,55 +793,11 @@ static const struct file_operations lirc_fops = {
 	.release	= close
 };
 
-static int ir_remove(struct i2c_client *client)
-{
-	if (strncmp("ir_tx_z8", client->name, 8) == 0) {
-		struct IR_tx *tx = i2c_get_clientdata(client);
-
-		if (tx) {
-			mutex_lock(&tx->client_lock);
-			tx->c = NULL;
-			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
-		}
-	} else if (strncmp("ir_rx_z8", client->name, 8) == 0) {
-		struct IR_rx *rx = i2c_get_clientdata(client);
-
-		if (rx) {
-			mutex_lock(&rx->client_lock);
-			rx->c = NULL;
-			mutex_unlock(&rx->client_lock);
-			put_ir_rx(rx, false);
-		}
-	}
-	return 0;
-}
-
-/* ir_devices_lock must be held */
-static struct IR *get_ir_device_by_adapter(struct i2c_adapter *adapter)
-{
-	struct IR *ir;
-
-	if (list_empty(&ir_devices_list))
-		return NULL;
-
-	list_for_each_entry(ir, &ir_devices_list, list)
-		if (ir->adapter == adapter) {
-			get_ir_device(ir, true);
-			return ir;
-		}
-
-	return NULL;
-}
-
 static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
-	struct IR *ir;
 	struct IR_tx *tx;
-	struct IR_rx *rx;
 	struct i2c_adapter *adap = client->adapter;
 	int ret;
-	bool tx_probe = false;
 
 	dev_dbg(&client->dev, "%s: %s on i2c-%d (%s), client addr=0x%02x\n",
 		__func__, id->name, adap->nr, adap->name, client->addr);
@@ -1405,209 +807,61 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * The IR transmitter is at i2c address 0x70.
 	 */
 
-	if (id->driver_data & ID_FLAG_TX)
-		tx_probe = true;
-	else if (tx_only) /* module option */
-		return -ENXIO;
-
-	pr_info("probing IR %s on %s (i2c-%d)\n",
-		tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-
-	mutex_lock(&ir_devices_lock);
-
-	/* Use a single struct IR instance for both the Rx and Tx functions */
-	ir = get_ir_device_by_adapter(adap);
-	if (!ir) {
-		ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-		if (!ir) {
-			ret = -ENOMEM;
-			goto out_no_ir;
-		}
-		kref_init(&ir->ref);
-
-		/* store for use in ir_probe() again, and open() later on */
-		INIT_LIST_HEAD(&ir->list);
-		list_add_tail(&ir->list, &ir_devices_list);
-
-		ir->adapter = adap;
-		ir->dev = &adap->dev;
-		mutex_init(&ir->ir_lock);
-		atomic_set(&ir->open_count, 0);
-		spin_lock_init(&ir->tx_ref_lock);
-		spin_lock_init(&ir->rx_ref_lock);
-
-		/* set lirc_dev stuff */
-		ir->l = lirc_allocate_device();
-		if (!ir->l) {
-			ret = -ENOMEM;
-			goto out_put_ir;
-		}
-
-		snprintf(ir->l->name, sizeof(ir->l->name), "lirc_zilog");
-		ir->l->code_length = 13;
-		ir->l->fops = &lirc_fops;
-		ir->l->owner = THIS_MODULE;
-		ir->l->dev.parent = &adap->dev;
-
-		/*
-		 * FIXME this is a pointer reference to us, but no refcount.
-		 *
-		 * This OK for now, since lirc_dev currently won't touch this
-		 * buffer as we provide our own lirc_fops.
-		 *
-		 * Currently our own lirc_fops rely on this ir->l->buf pointer
-		 */
-		ir->l->buf = &ir->rbuf;
-		/* This will be returned by lirc_get_pdata() */
-		ir->l->data = ir;
-		ret = lirc_buffer_init(ir->l->buf, 2, BUFLEN / 2);
-		if (ret) {
-			lirc_free_device(ir->l);
-			ir->l = NULL;
-			goto out_put_ir;
-		}
-	}
+	pr_info("probing IR Tx on %s (i2c-%d)\n", adap->name, adap->nr);
 
-	if (tx_probe) {
-		/* Get the IR_rx instance for later, if already allocated */
-		rx = get_ir_rx(ir);
-
-		/* Set up a struct IR_tx instance */
-		tx = kzalloc(sizeof(*tx), GFP_KERNEL);
-		if (!tx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&tx->ref);
-		ir->tx = tx;
-
-		ir->l->features |= LIRC_CAN_SEND_LIRCCODE;
-		mutex_init(&tx->client_lock);
-		tx->c = client;
-		tx->need_boot = 1;
-		tx->post_tx_ready_poll =
-			       (id->driver_data & ID_FLAG_HDPVR) ? false : true;
-
-		/* An ir ref goes to the struct IR_tx instance */
-		tx->ir = get_ir_device(ir, true);
-
-		/* A tx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_tx(ir));
-
-		/*
-		 * Load the 'firmware'.  We do this before registering with
-		 * lirc_dev, so the first firmware load attempt does not happen
-		 * after a open() or write() call on the device.
-		 *
-		 * Failure here is not deemed catastrophic, so the receiver will
-		 * still be usable.  Firmware load will be retried in write(),
-		 * if it is needed.
-		 */
-		fw_load(tx);
-
-		/* Proceed only if the Rx client is also ready or not needed */
-		if (!rx && !tx_only) {
-			dev_info(tx->ir->dev,
-				 "probe of IR Tx on %s (i2c-%d) done. Waiting on IR Rx.\n",
-				 adap->name, adap->nr);
-			goto out_ok;
-		}
-	} else {
-		/* Get the IR_tx instance for later, if already allocated */
-		tx = get_ir_tx(ir);
-
-		/* Set up a struct IR_rx instance */
-		rx = kzalloc(sizeof(*rx), GFP_KERNEL);
-		if (!rx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&rx->ref);
-		ir->rx = rx;
-
-		ir->l->features |= LIRC_CAN_REC_LIRCCODE;
-		mutex_init(&rx->client_lock);
-		rx->c = client;
-		rx->hdpvr_data_fmt =
-			       (id->driver_data & ID_FLAG_HDPVR) ? true : false;
-
-		/* An ir ref goes to the struct IR_rx instance */
-		rx->ir = get_ir_device(ir, true);
+	/* Set up a struct IR_tx instance */
+	tx = devm_kzalloc(&client->dev, sizeof(*tx), GFP_KERNEL);
+	if (!tx)
+		return -ENOMEM;
 
-		/* An rx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_rx(ir));
+	mutex_init(&tx->client_lock);
+	tx->c = client;
+	tx->need_boot = 1;
+	tx->post_tx_ready_poll = !(id->driver_data & ID_FLAG_HDPVR);
 
-		/*
-		 * Start the polling thread.
-		 * It will only perform an empty loop around schedule_timeout()
-		 * until we register with lirc_dev and the first user open()
-		 */
-		/* An ir ref goes to the new rx polling kthread */
-		rx->task = kthread_run(lirc_thread, get_ir_device(ir, true),
-				       "zilog-rx-i2c-%d", adap->nr);
-		if (IS_ERR(rx->task)) {
-			ret = PTR_ERR(rx->task);
-			dev_err(tx->ir->dev,
-				"%s: could not start IR Rx polling thread\n",
-				__func__);
-			/* Failed kthread, so put back the ir ref */
-			put_ir_device(ir, true);
-			/* Failure exit, so put back rx ref from i2c_client */
-			i2c_set_clientdata(client, NULL);
-			put_ir_rx(rx, true);
-			ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-			goto out_put_tx;
-		}
+	/* set lirc_dev stuff */
+	tx->l = lirc_allocate_device();
+	if (!tx->l)
+		return -ENOMEM;
 
-		/* Proceed only if the Tx client is also ready */
-		if (!tx) {
-			pr_info("probe of IR Rx on %s (i2c-%d) done. Waiting on IR Tx.\n",
-				adap->name, adap->nr);
-			goto out_ok;
-		}
-	}
+	snprintf(tx->l->name, sizeof(tx->l->name), "lirc_zilog");
+	tx->l->features |= LIRC_CAN_SEND_LIRCCODE;
+	tx->l->code_length = 13;
+	tx->l->fops = &lirc_fops;
+	tx->l->owner = THIS_MODULE;
+	tx->l->dev.parent = &client->dev;
 
 	/* register with lirc */
-	ret = lirc_register_device(ir->l);
+	ret = lirc_register_device(tx->l);
 	if (ret < 0) {
-		dev_err(tx->ir->dev,
-			"%s: lirc_register_device() failed: %i\n",
+		dev_err(&tx->l->dev, "%s: lirc_register_device() failed: %i\n",
 			__func__, ret);
-		lirc_free_device(ir->l);
-		ir->l = NULL;
-		goto out_put_xx;
+		lirc_free_device(tx->l);
+		tx->l = NULL;
+		return ret;
 	}
 
-	dev_info(ir->dev,
+	/*
+	 * Load the 'firmware'.  We do this before registering with
+	 * lirc_dev, so the first firmware load attempt does not happen
+	 * after a open() or write() call on the device.
+	 */
+	ret = fw_load(tx);
+	if (ret < 0) {
+		lirc_unregister_device(tx->l);
+		return ret;
+	}
+
+	/* A tx ref goes to the i2c_client */
+	i2c_set_clientdata(client, tx);
+
+	dev_info(&tx->l->dev,
 		 "IR unit on %s (i2c-%d) registered as lirc%d and ready\n",
-		 adap->name, adap->nr, ir->l->minor);
-
-out_ok:
-	if (rx)
-		put_ir_rx(rx, true);
-	if (tx)
-		put_ir_tx(tx, true);
-	put_ir_device(ir, true);
-	dev_info(ir->dev,
-		 "probe of IR %s on %s (i2c-%d) done\n",
-		 tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-	mutex_unlock(&ir_devices_lock);
-	return 0;
+		 adap->name, adap->nr, tx->l->minor);
 
-out_put_xx:
-	if (rx)
-		put_ir_rx(rx, true);
-out_put_tx:
-	if (tx)
-		put_ir_tx(tx, true);
-out_put_ir:
-	put_ir_device(ir, true);
-out_no_ir:
-	dev_err(&client->dev,
-		"%s: probing IR %s on %s (i2c-%d) failed with %d\n",
-		__func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr, ret);
-	mutex_unlock(&ir_devices_lock);
-	return ret;
+	dev_info(&tx->l->dev,
+		 "probe of IR Tx on %s (i2c-%d) done\n", adap->name, adap->nr);
+	return 0;
 }
 
 static int __init zilog_init(void)
@@ -1648,6 +902,3 @@ MODULE_ALIAS("lirc_pvr150");
 
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Enable debugging messages");
-
-module_param(tx_only, bool, 0644);
-MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function");
Signature · 1 line
2.13.6
author maintainer
#13 lore raw

PATCH v3 5/26 media: lirc_zilog: fix variable types and other ugliness

In reply to Sean Young

Cleans up code and makes checkpatch happy.

---
 drivers/staging/media/lirc/lirc_zilog.c | 162 +++++++++++---------------------
 1 file changed, 55 insertions(+), 107 deletions(-)
drivers/staging/media/lirc/lirc_zilog.c +55 -107
index 757b3fc247ac..902fade98d57 100644
@@ -32,32 +32,15 @@
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
+#include <asm/unaligned.h>
 #include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/kernel.h>
-#include <linux/sched/signal.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/string.h>
-#include <linux/timer.h>
 #include <linux/delay.h>
-#include <linux/completion.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/firmware.h>
 #include <linux/vmalloc.h>
 
-#include <linux/mutex.h>
-#include <linux/kthread.h>
-
 #include <media/lirc_dev.h>
 #include <media/lirc.h>
 
@@ -70,7 +53,7 @@ struct IR_tx {
 	struct i2c_client *c;
 
 	/* TX additional actions needed */
-	int need_boot;
+	bool need_boot;
 	bool post_tx_ready_poll;
 	struct lirc_dev *l;
 };
@@ -81,45 +64,39 @@ struct IR_tx {
 /* Hauppauge IR transmitter data */
 struct tx_data_struct {
 	/* Boot block */
-	unsigned char *boot_data;
+	u8 *boot_data;
 
 	/* Start of binary data block */
-	unsigned char *datap;
+	u8 *datap;
 
 	/* End of binary data block */
-	unsigned char *endp;
+	u8 *endp;
 
 	/* Number of installed codesets */
-	unsigned int num_code_sets;
+	u32 num_code_sets;
 
 	/* Pointers to codesets */
-	unsigned char **code_sets;
+	u8 **code_sets;
 
 	/* Global fixed data template */
 	int fixed[TX_BLOCK_SIZE];
 };
 
 static struct tx_data_struct *tx_data;
-static struct mutex tx_data_lock;
-
-/* module parameters */
-static bool debug;	/* debug output */
+static DEFINE_MUTEX(tx_data_lock);
 
 /* safe read of a uint32 (always network byte order) */
-static int read_uint32(unsigned char **data,
-		       unsigned char *endp, unsigned int *val)
+static int read_u32(u8 **data, u8 *endp, u32 *val)
 {
 	if (*data + 4 > endp)
 		return 0;
-	*val = ((*data)[0] << 24) | ((*data)[1] << 16) |
-	       ((*data)[2] << 8) | (*data)[3];
+	*val = get_unaligned_be32(*data);
 	*data += 4;
 	return 1;
 }
 
 /* safe read of a uint8 */
-static int read_uint8(unsigned char **data,
-		      unsigned char *endp, unsigned char *val)
+static int read_u8(u8 **data, u8 *endp, u8 *val)
 {
 	if (*data + 1 > endp)
 		return 0;
@@ -128,8 +105,8 @@ static int read_uint8(unsigned char **data,
 }
 
 /* safe skipping of N bytes */
-static int skip(unsigned char **data,
-		unsigned char *endp, unsigned int distance)
+static int skip(u8 **data,
+		u8 *endp, unsigned int distance)
 {
 	if (*data + distance > endp)
 		return 0;
@@ -138,11 +115,11 @@ static int skip(unsigned char **data,
 }
 
 /* decompress key data into the given buffer */
-static int get_key_data(unsigned char *buf,
+static int get_key_data(u8 *buf,
 			unsigned int codeset, unsigned int key)
 {
-	unsigned char *data, *endp, *diffs, *key_block;
-	unsigned char keys, ndiffs, id;
+	u8 *data, *endp, *diffs, *key_block;
+	u8 keys, ndiffs, id;
 	unsigned int base, lim, pos, i;
 
 	/* Binary search for the codeset */
@@ -150,7 +127,7 @@ static int get_key_data(unsigned char *buf,
 		pos = base + (lim >> 1);
 		data = tx_data->code_sets[pos];
 
-		if (!read_uint32(&data, tx_data->endp, &i))
+		if (!read_u32(&data, tx_data->endp, &i))
 			goto corrupt;
 
 		if (i == codeset) {
@@ -169,8 +146,8 @@ static int get_key_data(unsigned char *buf,
 		tx_data->code_sets[pos + 1] : tx_data->endp;
 
 	/* Read the block header */
-	if (!read_uint8(&data, endp, &keys) ||
-	    !read_uint8(&data, endp, &ndiffs) ||
+	if (!read_u8(&data, endp, &keys) ||
+	    !read_u8(&data, endp, &ndiffs) ||
 	    ndiffs > TX_BLOCK_SIZE || keys == 0)
 		goto corrupt;
 
@@ -180,16 +157,16 @@ static int get_key_data(unsigned char *buf,
 		goto corrupt;
 
 	/* Read the id of the first key */
-	if (!read_uint8(&data, endp, &id))
+	if (!read_u8(&data, endp, &id))
 		goto corrupt;
 
 	/* Unpack the first key's data */
 	for (i = 0; i < TX_BLOCK_SIZE; ++i) {
 		if (tx_data->fixed[i] == -1) {
-			if (!read_uint8(&data, endp, &buf[i]))
+			if (!read_u8(&data, endp, &buf[i]))
 				goto corrupt;
 		} else {
-			buf[i] = (unsigned char)tx_data->fixed[i];
+			buf[i] = tx_data->fixed[i];
 		}
 	}
 
@@ -207,7 +184,7 @@ static int get_key_data(unsigned char *buf,
 	/* Binary search for the key */
 	for (base = 0, lim = keys - 1; lim; lim >>= 1) {
 		/* Seek to block */
-		unsigned char *key_data;
+		u8 *key_data;
 
 		pos = base + (lim >> 1);
 		key_data = key_block + (ndiffs + 1) * pos;
@@ -218,9 +195,9 @@ static int get_key_data(unsigned char *buf,
 
 			/* found, so unpack the diffs */
 			for (i = 0; i < ndiffs; ++i) {
-				unsigned char val;
+				u8 val;
 
-				if (!read_uint8(&key_data, endp, &val) ||
+				if (!read_u8(&key_data, endp, &val) ||
 				    diffs[i] >= TX_BLOCK_SIZE)
 					goto corrupt;
 				buf[diffs[i]] = val;
@@ -241,17 +218,17 @@ static int get_key_data(unsigned char *buf,
 }
 
 /* send a block of data to the IR TX device */
-static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
+static int send_data_block(struct IR_tx *tx, u8 *data_block)
 {
 	int i, j, ret;
-	unsigned char buf[5];
+	u8 buf[5];
 
 	for (i = 0; i < TX_BLOCK_SIZE;) {
 		int tosend = TX_BLOCK_SIZE - i;
 
 		if (tosend > 4)
 			tosend = 4;
-		buf[0] = (unsigned char)(i + 1);
+		buf[0] = i + 1;
 		for (j = 0; j < tosend; ++j)
 			buf[1 + j] = data_block[i + j];
 		dev_dbg(&tx->l->dev, "%*ph", 5, buf);
@@ -270,7 +247,7 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block)
 static int send_boot_data(struct IR_tx *tx)
 {
 	int ret, i;
-	unsigned char buf[4];
+	u8 buf[4];
 
 	/* send the boot block */
 	ret = send_data_block(tx, tx_data->boot_data);
@@ -295,7 +272,7 @@ static int send_boot_data(struct IR_tx *tx)
 		ret = i2c_master_send(tx->c, buf, 1);
 		if (ret == 1)
 			break;
-		udelay(100);
+		usleep_range(100, 110);
 	}
 
 	if (ret != 1) {
@@ -348,7 +325,7 @@ static int fw_load(struct IR_tx *tx)
 {
 	int ret;
 	unsigned int i;
-	unsigned char *data, version, num_global_fixed;
+	u8 *data, version, num_global_fixed;
 	const struct firmware *fw_entry;
 
 	/* Already loaded? */
@@ -392,7 +369,7 @@ static int fw_load(struct IR_tx *tx)
 
 	/* Check version */
 	data = tx_data->datap;
-	if (!read_uint8(&data, tx_data->endp, &version))
+	if (!read_u8(&data, tx_data->endp, &version))
 		goto corrupt;
 	if (version != 1) {
 		dev_err(&tx->l->dev,
@@ -408,8 +385,8 @@ static int fw_load(struct IR_tx *tx)
 	if (!skip(&data, tx_data->endp, TX_BLOCK_SIZE))
 		goto corrupt;
 
-	if (!read_uint32(&data, tx_data->endp,
-			 &tx_data->num_code_sets))
+	if (!read_u32(&data, tx_data->endp,
+		      &tx_data->num_code_sets))
 		goto corrupt;
 
 	dev_dbg(&tx->l->dev, "%u IR blaster codesets loaded\n",
@@ -427,14 +404,14 @@ static int fw_load(struct IR_tx *tx)
 		tx_data->fixed[i] = -1;
 
 	/* Read global fixed data template */
-	if (!read_uint8(&data, tx_data->endp, &num_global_fixed) ||
+	if (!read_u8(&data, tx_data->endp, &num_global_fixed) ||
 	    num_global_fixed > TX_BLOCK_SIZE)
 		goto corrupt;
 	for (i = 0; i < num_global_fixed; ++i) {
-		unsigned char pos, val;
+		u8 pos, val;
 
-		if (!read_uint8(&data, tx_data->endp, &pos) ||
-		    !read_uint8(&data, tx_data->endp, &val) ||
+		if (!read_u8(&data, tx_data->endp, &pos) ||
+		    !read_u8(&data, tx_data->endp, &val) ||
 		    pos >= TX_BLOCK_SIZE)
 			goto corrupt;
 		tx_data->fixed[pos] = (int)val;
@@ -442,17 +419,17 @@ static int fw_load(struct IR_tx *tx)
 
 	/* Filch out the position of each code set */
 	for (i = 0; i < tx_data->num_code_sets; ++i) {
-		unsigned int id;
-		unsigned char keys;
-		unsigned char ndiffs;
+		u32 id;
+		u8 keys;
+		u8 ndiffs;
 
 		/* Save the codeset position */
 		tx_data->code_sets[i] = data;
 
 		/* Read header */
-		if (!read_uint32(&data, tx_data->endp, &id) ||
-		    !read_uint8(&data, tx_data->endp, &keys) ||
-		    !read_uint8(&data, tx_data->endp, &ndiffs) ||
+		if (!read_u32(&data, tx_data->endp, &id) ||
+		    !read_u8(&data, tx_data->endp, &keys) ||
+		    !read_u8(&data, tx_data->endp, &ndiffs) ||
 		    ndiffs > TX_BLOCK_SIZE || keys == 0)
 			goto corrupt;
 
@@ -489,8 +466,8 @@ static int fw_load(struct IR_tx *tx)
 /* send a keypress to the IR TX device */
 static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 {
-	unsigned char data_block[TX_BLOCK_SIZE];
-	unsigned char buf[2];
+	u8 data_block[TX_BLOCK_SIZE];
+	u8 buf[2];
 	int i, ret;
 
 	/* Get data for the codeset/key */
@@ -524,7 +501,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key)
 		ret = i2c_master_send(tx->c, buf, 1);
 		if (ret == 1)
 			break;
-		udelay(100);
+		usleep_range(100, 110);
 	}
 
 	if (ret != 1) {
@@ -638,7 +615,7 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 		}
 
 		/* Send boot data first if required */
-		if (tx->need_boot == 1) {
+		if (tx->need_boot) {
 			/* Make sure we have the 'firmware' loaded, first */
 			ret = fw_load(tx);
 			if (ret != 0) {
@@ -650,13 +627,13 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 			/* Prep the chip for transmitting codes */
 			ret = send_boot_data(tx);
 			if (ret == 0)
-				tx->need_boot = 0;
+				tx->need_boot = false;
 		}
 
 		/* Send the code */
 		if (ret == 0) {
 			ret = send_code(tx, (unsigned int)command >> 16,
-					    (unsigned int)command & 0xFFFF);
+					(unsigned int)command & 0xFFFF);
 			if (ret == -EPROTO) {
 				mutex_unlock(&tx->client_lock);
 				return ret;
@@ -680,7 +657,7 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 			}
 			set_current_state(TASK_UNINTERRUPTIBLE);
 			schedule_timeout((100 * HZ + 999) / 1000);
-			tx->need_boot = 1;
+			tx->need_boot = true;
 			++failures;
 		} else {
 			i += sizeof(int);
@@ -693,7 +670,6 @@ static ssize_t write(struct file *filep, const char __user *buf, size_t n,
 	return n;
 }
 
-
 static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 {
 	struct IR_tx *tx = lirc_get_pdata(filep);
@@ -773,7 +749,7 @@ static const struct i2c_device_id ir_transceiver_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ir_transceiver_id);
 
-static struct i2c_driver driver = {
+static struct i2c_driver zilog_driver = {
 	.driver = {
 		.name	= "Zilog/Hauppauge i2c IR",
 	},
@@ -806,17 +782,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	 * The IR receiver    is at i2c address 0x71.
 	 * The IR transmitter is at i2c address 0x70.
 	 */
-
-	pr_info("probing IR Tx on %s (i2c-%d)\n", adap->name, adap->nr);
-
-	/* Set up a struct IR_tx instance */
 	tx = devm_kzalloc(&client->dev, sizeof(*tx), GFP_KERNEL);
 	if (!tx)
 		return -ENOMEM;
 
 	mutex_init(&tx->client_lock);
 	tx->c = client;
-	tx->need_boot = 1;
+	tx->need_boot = true;
 	tx->post_tx_ready_poll = !(id->driver_data & ID_FLAG_HDPVR);
 
 	/* set lirc_dev stuff */
@@ -855,40 +827,21 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	/* A tx ref goes to the i2c_client */
 	i2c_set_clientdata(client, tx);
 
-	dev_info(&tx->l->dev,
-		 "IR unit on %s (i2c-%d) registered as lirc%d and ready\n",
-		 adap->name, adap->nr, tx->l->minor);
-
-	dev_info(&tx->l->dev,
-		 "probe of IR Tx on %s (i2c-%d) done\n", adap->name, adap->nr);
 	return 0;
 }
 
 static int __init zilog_init(void)
 {
-	int ret;
-
-	pr_notice("Zilog/Hauppauge IR driver initializing\n");
-
-	mutex_init(&tx_data_lock);
-
 	request_module("firmware_class");
 
-	ret = i2c_add_driver(&driver);
-	if (ret)
-		pr_err("initialization failed\n");
-	else
-		pr_notice("initialization complete\n");
-
-	return ret;
+	return i2c_add_driver(&zilog_driver);
 }
 
 static void __exit zilog_exit(void)
 {
-	i2c_del_driver(&driver);
+	i2c_del_driver(&zilog_driver);
 	/* if loaded */
 	fw_unload();
-	pr_notice("Zilog/Hauppauge IR driver unloaded\n");
 }
 
 module_init(zilog_init);
@@ -897,8 +850,3 @@ module_exit(zilog_exit);
 MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)");
 MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, Andy Walls");
 MODULE_LICENSE("GPL");
-/* for compat with old name, which isn't all that accurate anymore */
-MODULE_ALIAS("lirc_pvr150");
-
-module_param(debug, bool, 0644);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
Signature · 1 line
2.13.6
author maintainer
#14 lore raw

PATCH v3 6/26 media: lirc_zilog: port to rc-core using scancode tx interface

In reply to Sean Young

Now that rc-core can send a scancode by rc protocol and scancode, port the lirc_zilog to this interface. The firmware file needs updating to contain the protocol and scancode, so we have haup-ir-blaster-v2.bin for this.

The LIRC_MODE_LIRCCODE is no longer supported, and transmit can only be done using the new LIRC_MODE_SCANCODE interface.

---
 drivers/media/rc/ir-lirc-codec.c        |  30 ++-
 drivers/staging/media/lirc/lirc_zilog.c | 446 ++++++++++++--------------------
 include/media/rc-core.h                 |   2 +
 3 files changed, 191 insertions(+), 287 deletions(-)
drivers/media/rc/ir-lirc-codec.c +21 -9
index a5369978e56f..41259b1ce3c2 100644
@@ -122,6 +122,10 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 	if (!lirc)
 		return -EFAULT;
 
+	dev = lirc->dev;
+	if (!dev)
+		return -EFAULT;
+
 	if (lirc->send_mode == LIRC_MODE_SCANCODE) {
 		struct lirc_scancode scan;
 
@@ -134,6 +138,11 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 		if (scan.flags || scan.keycode || scan.timestamp)
 			return -EINVAL;
 
+		if (dev->tx_scancode) {
+			ret = dev->tx_scancode(dev, &scan);
+			return ret < 0 ? ret : n;
+		}
+
 		raw = kmalloc_array(LIRCBUF_SIZE, sizeof(*raw), GFP_KERNEL);
 		if (!raw)
 			return -ENOMEM;
@@ -174,12 +183,6 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 			return PTR_ERR(txbuf);
 	}
 
-	dev = lirc->dev;
-	if (!dev) {
-		ret = -EFAULT;
-		goto out;
-	}
-
 	if (!dev->tx_ir) {
 		ret = -EINVAL;
 		goto out;
@@ -252,16 +255,19 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 
 	/* mode support */
 	case LIRC_GET_SEND_MODE:
-		if (!dev->tx_ir)
+		if (!dev->tx_ir && !dev->tx_scancode)
 			return -ENOTTY;
 
 		val = lirc->send_mode;
 		break;
 
 	case LIRC_SET_SEND_MODE:
-		if (!dev->tx_ir)
+		if (!dev->tx_ir && !dev->tx_scancode)
 			return -ENOTTY;
 
+		if (!dev->tx_ir && val == LIRC_MODE_PULSE)
+			return -EINVAL;
+
 		if (!(val == LIRC_MODE_PULSE || val == LIRC_MODE_SCANCODE))
 			return -EINVAL;
 
@@ -410,6 +416,9 @@ static int ir_lirc_register(struct rc_dev *dev)
 			features |= LIRC_CAN_GET_REC_RESOLUTION;
 	}
 
+	if (dev->tx_scancode)
+		features |= LIRC_CAN_SEND_SCANCODE;
+
 	if (dev->tx_ir) {
 		features |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE;
 		if (dev->s_tx_mask)
@@ -450,7 +459,10 @@ static int ir_lirc_register(struct rc_dev *dev)
 	if (rc < 0)
 		goto out;
 
-	dev->raw->lirc.send_mode = LIRC_MODE_PULSE;
+	if (dev->tx_scancode)
+		dev->raw->lirc.send_mode = LIRC_MODE_SCANCODE;
+	else
+		dev->raw->lirc.send_mode = LIRC_MODE_PULSE;
 
 	dev->raw->lirc.ldev = ldev;
 	dev->raw->lirc.dev = dev;
drivers/staging/media/lirc/lirc_zilog.c +168 -278

708 lines not on this page · raw message

include/media/rc-core.h +2 -0
index ca48632ec8e2..b74b3165dc78 100644
@@ -125,6 +125,7 @@ enum rc_filter_type {
  * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
  * @s_rx_carrier_range: inform driver about carrier it is expected to handle
  * @tx_ir: transmit IR
+ * @tx_scancode: transmit scancode
  * @s_idle: enable/disable hardware idle mode, upon which,
  *	device doesn't interrupt host until it sees IR pulses
  * @s_learning_mode: enable wide band receiver used for learning
@@ -182,6 +183,7 @@ struct rc_dev {
 	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
 	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
 	int				(*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n);
+	int				(*tx_scancode)(struct rc_dev *dev, struct lirc_scancode *scancode);
 	void				(*s_idle)(struct rc_dev *dev, bool enable);
 	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
 	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
Signature · 1 line
2.13.6
author maintainer
#15 lore raw

PATCH v3 7/26 media: promote lirc_zilog out of staging

In reply to Sean Young

Rename to zilog_ir in the process.

---
 drivers/media/rc/Kconfig                           | 12 ++++++++
 drivers/media/rc/Makefile                          |  1 +
 .../lirc/lirc_zilog.c => media/rc/zilog_ir.c}      |  0
 drivers/staging/media/Kconfig                      |  3 --
 drivers/staging/media/Makefile                     |  1 -
 drivers/staging/media/lirc/Kconfig                 | 21 -------------
 drivers/staging/media/lirc/Makefile                |  6 ----
 drivers/staging/media/lirc/TODO                    | 36 ----------------------
 8 files changed, 13 insertions(+), 67 deletions(-)
 rename drivers/{staging/media/lirc/lirc_zilog.c => media/rc/zilog_ir.c} (100%)
 delete mode 100644 drivers/staging/media/lirc/Kconfig
 delete mode 100644 drivers/staging/media/lirc/Makefile
 delete mode 100644 drivers/staging/media/lirc/TODO
drivers/media/rc/Kconfig +12 -0
index afb3456d4e20..2a47139e5811 100644
@@ -483,6 +483,18 @@ config IR_TANGO
 	   The HW decoder supports NEC, RC-5, RC-6 IR protocols.
 	   When compiled as a module, look for tango-ir.
 
+config IR_ZILOG
+	tristate "Zilog/Hauppauge IR Transmitter"
+	depends on RC_CORE
+	depends on LIRC
+	depends on I2C
+	---help---
+	   Driver for the Zilog/Hauppauge IR Transmitter, found on
+	   PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called zilog_ir.
+
 config IR_ZX
 	tristate "ZTE ZX IR remote control"
 	depends on RC_CORE
drivers/media/rc/Makefile +1 -0
index 643797dc971b..a6bf6827b1ed 100644
@@ -43,5 +43,6 @@ obj-$(CONFIG_IR_IMG) += img-ir/
 obj-$(CONFIG_IR_SERIAL) += serial_ir.o
 obj-$(CONFIG_IR_SIR) += sir_ir.o
 obj-$(CONFIG_IR_MTK) += mtk-cir.o
+obj-$(CONFIG_IR_ZILOG) += zilog_ir.o
 obj-$(CONFIG_IR_ZX) += zx-irdec.o
 obj-$(CONFIG_IR_TANGO) += tango-ir.o
drivers/media/rc/zilog_ir.c renamed from drivers/staging/media/lirc/lirc_zilog.c +0 -0
similarity index 100%
rename from drivers/staging/media/lirc/lirc_zilog.c
rename to drivers/media/rc/zilog_ir.c
drivers/staging/media/Kconfig +0 -3
index f8c25ee082ef..3a09140700e6 100644
@@ -31,7 +31,4 @@ source "drivers/staging/media/imx/Kconfig"
 
 source "drivers/staging/media/omap4iss/Kconfig"
 
-# Keep LIRC at the end, as it has sub-menus
-source "drivers/staging/media/lirc/Kconfig"
-
 endif
drivers/staging/media/Makefile +0 -1
index ac090c5fce30..9c057126d61f 100644
@@ -1,7 +1,6 @@
 obj-$(CONFIG_I2C_BCM2048)	+= bcm2048/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
 obj-$(CONFIG_VIDEO_IMX_MEDIA)	+= imx/
-obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_VIDEO_DM365_VPFE)	+= davinci_vpfe/
 obj-$(CONFIG_VIDEO_OMAP4)	+= omap4iss/
 obj-$(CONFIG_INTEL_ATOMISP)     += atomisp/
drivers/staging/media/lirc/Kconfig deleted +0 -21
deleted file mode 100644
index 3e350a9922de..000000000000
@@ -1,21 +0,0 @@
-#
-# LIRC driver(s) configuration
-#
-menuconfig LIRC_STAGING
-	bool "Linux Infrared Remote Control IR receiver/transmitter drivers"
-	depends on LIRC
-	help
-	  Say Y here, and all supported Linux Infrared Remote Control IR and
-	  RF receiver and transmitter drivers will be displayed. When paired
-	  with a remote control and the lirc daemon, the receiver drivers
-	  allow control of your Linux system via remote control.
-
-if LIRC_STAGING
-
-config LIRC_ZILOG
-	tristate "Zilog/Hauppauge IR Transmitter"
-	depends on LIRC && I2C
-	help
-	  Driver for the Zilog/Hauppauge IR Transmitter, found on
-	  PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
-endif
drivers/staging/media/lirc/Makefile deleted +0 -6
deleted file mode 100644
index 665562436e30..000000000000
@@ -1,6 +0,0 @@
-# Makefile for the lirc drivers.
-#
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_LIRC_ZILOG)	+= lirc_zilog.o
drivers/staging/media/lirc/TODO deleted +0 -36
deleted file mode 100644
index a97800a8e127..000000000000
@@ -1,36 +0,0 @@
-1. Both ir-kbd-i2c and lirc_zilog provide support for RX events for
-the chips supported by lirc_zilog.  Before moving lirc_zilog out of staging:
-
-a. ir-kbd-i2c needs a module parameter added to allow the user to tell
-   ir-kbd-i2c to ignore Z8 IR units.
-
-b. lirc_zilog should provide Rx key presses to the rc core like ir-kbd-i2c
-   does.
-
-
-2. lirc_zilog module ref-counting need examination.  It has not been
-verified that cdev and lirc_dev will take the proper module references on
-lirc_zilog to prevent removal of lirc_zilog when the /dev/lircN device node
-is open.
-
-(The good news is ref-counting of lirc_zilog internal structures appears to be
-complete.  Testing has shown the cx18 module can be unloaded out from under
-irw + lircd + lirc_dev, with the /dev/lirc0 device node open, with no adverse
-effects.  The cx18 module could then be reloaded and irw properly began
-receiving button presses again and ir_send worked without error.)
-
-
-3. Bridge drivers, if able, should provide a chip reset() callback
-to lirc_zilog via struct IR_i2c_init_data.  cx18 and ivtv already have routines
-to perform Z8 chip resets via GPIO manipulations.  This would allow lirc_zilog
-to bring the chip back to normal when it hangs, in the same places the
-original lirc_pvr150 driver code does.  This is not strictly needed, so it
-is not required to move lirc_zilog out of staging.
-
-Note: Both lirc_zilog and ir-kbd-i2c support the Zilog Z8 for IR, as programmed
-and installed on Hauppauge products.  When working on either module, developers
-must consider at least the following bridge drivers which mention an IR Rx unit
-at address 0x71 (indicative of a Z8):
-
-	ivtv cx18 hdpvr pvrusb2 bt8xx cx88 saa7134
-
Signature · 1 line
2.13.6
author maintainer
#16 lore raw

PATCH v3 8/26 media: lirc: remove LIRCCODE and LIRC_GET_LENGTH

In reply to Sean Young

LIRCCODE is a lirc mode where a driver produces driver-dependent codes for receive and transmit. No driver uses this any more. The LIRC_GET_LENGTH ioctl was used for this mode only.

---
 Documentation/media/lirc.h.rst.exceptions          |  5 +++
 Documentation/media/uapi/rc/lirc-dev-intro.rst     | 15 --------
 Documentation/media/uapi/rc/lirc-func.rst          |  1 -
 Documentation/media/uapi/rc/lirc-get-features.rst  |  7 +---
 Documentation/media/uapi/rc/lirc-get-length.rst    | 44 ----------------------
 Documentation/media/uapi/rc/lirc-get-rec-mode.rst  |  4 +-
 Documentation/media/uapi/rc/lirc-get-send-mode.rst |  3 +-
 drivers/media/rc/ir-lirc-codec.c                   |  1 -
 drivers/media/rc/lirc_dev.c                        | 12 ------
 include/media/lirc_dev.h                           |  4 --
 10 files changed, 9 insertions(+), 87 deletions(-)
 delete mode 100644 Documentation/media/uapi/rc/lirc-get-length.rst
Documentation/media/lirc.h.rst.exceptions +5 -0
index c130617a9986..63ba1d341905 100644
@@ -28,6 +28,10 @@ ignore define LIRC_CAN_SEND_MASK
 ignore define LIRC_CAN_REC_MASK
 ignore define LIRC_CAN_SET_REC_DUTY_CYCLE
 
+# Obsolete ioctls
+
+ignore ioctl LIRC_GET_LENGTH
+
 # Undocumented macros
 
 ignore define PULSE_BIT
@@ -40,3 +44,4 @@ ignore define LIRC_VALUE_MASK
 ignore define LIRC_MODE2_MASK
 
 ignore define LIRC_MODE_RAW
+ignore define LIRC_MODE_LIRCCODE
Documentation/media/uapi/rc/lirc-dev-intro.rst +0 -15
index d1936eeb9ce0..3cacf9aeac40 100644
@@ -72,21 +72,6 @@ on the following table.
         this packet will be sent, with the number of microseconds with
         no IR.
 
-.. _lirc-mode-lirccode:
-
-``LIRC_MODE_LIRCCODE``
-
-    This mode can be used for IR receive and send.
-
-    The IR signal is decoded internally by the receiver, or encoded by the
-    transmitter. The LIRC interface represents the scancode as byte string,
-    which might not be a u32, it can be any length. The value is entirely
-    driver dependent. This mode is used by some older lirc drivers.
-
-    The length of each code depends on the driver, which can be retrieved
-    with :ref:`lirc_get_length`. This length is used both
-    for transmitting and receiving IR.
-
 .. _lirc-mode-pulse:
 
 ``LIRC_MODE_PULSE``
Documentation/media/uapi/rc/lirc-func.rst +0 -1
index 9b5a772ec96c..ddb4620de294 100644
@@ -18,7 +18,6 @@ LIRC Function Reference
     lirc-set-send-duty-cycle
     lirc-get-timeout
     lirc-set-rec-timeout
-    lirc-get-length
     lirc-set-rec-carrier
     lirc-set-rec-carrier-range
     lirc-set-send-carrier
Documentation/media/uapi/rc/lirc-get-features.rst +2 -5
index 64f89a4f9d9c..50c2c26d8e89 100644
@@ -62,8 +62,7 @@ LIRC features
 
 ``LIRC_CAN_REC_LIRCCODE``
 
-    The driver is capable of receiving using
-    :ref:`LIRC_MODE_LIRCCODE <lirc-mode-LIRCCODE>`.
+    Unused. Kept just to avoid breaking uAPI.
 
 .. _LIRC-CAN-SET-SEND-CARRIER:
 
@@ -170,9 +169,7 @@ LIRC features
 
 ``LIRC_CAN_SEND_LIRCCODE``
 
-    The driver supports sending (also called as IR blasting or IR TX) using
-    :ref:`LIRC_MODE_LIRCCODE <lirc-mode-LIRCCODE>`.
-
+    Unused. Kept just to avoid breaking uAPI.
 
 Return Value
 ============
Documentation/media/uapi/rc/lirc-get-length.rst deleted +0 -44

44 lines not on this page · raw message

Documentation/media/uapi/rc/lirc-get-rec-mode.rst +1 -3
index a4eb6c0a26e9..b89de9add921 100644
@@ -34,9 +34,7 @@ Description
 ===========
 
 Get/set supported receive modes. Only :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`
-and :ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` are supported for IR
-receive. Use :ref:`lirc_get_features` to find out which modes the driver
-supports.
+is supported for IR receive.
 
 Return Value
 ============
Documentation/media/uapi/rc/lirc-get-send-mode.rst +1 -2
index a169b234290e..e686b21689a0 100644
@@ -36,8 +36,7 @@ Description
 
 Get/set current transmit mode.
 
-Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and
-:ref:`LIRC_MODE_LIRCCODE <lirc-mode-lirccode>` is supported by for IR send,
+Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` is supported by for IR send,
 depending on the driver. Use :ref:`lirc_get_features` to find out which
 modes the driver supports.
 
drivers/media/rc/ir-lirc-codec.c +0 -1
index 41259b1ce3c2..4355fbc10158 100644
@@ -447,7 +447,6 @@ static int ir_lirc_register(struct rc_dev *dev)
 	ldev->features = features;
 	ldev->data = &dev->raw->lirc;
 	ldev->buf = NULL;
-	ldev->code_length = sizeof(struct ir_raw_event) * 8;
 	ldev->chunk_size = sizeof(int);
 	ldev->buffer_size = LIRCBUF_SIZE;
 	ldev->fops = &lirc_fops;
drivers/media/rc/lirc_dev.c +0 -12
index e16d1138ca48..ef7e915dc9a2 100644
@@ -137,12 +137,6 @@ int lirc_register_device(struct lirc_dev *d)
 		return -EINVAL;
 	}
 
-	if (d->code_length < 1 || d->code_length > (BUFLEN * 8)) {
-		dev_err(&d->dev, "code length must be less than %d bits\n",
-			BUFLEN * 8);
-		return -EBADRQC;
-	}
-
 	if (!d->buf && !(d->fops && d->fops->read &&
 			 d->fops->poll && d->fops->unlocked_ioctl)) {
 		dev_err(&d->dev, "undefined read, poll, ioctl\n");
@@ -152,9 +146,6 @@ int lirc_register_device(struct lirc_dev *d)
 	/* some safety check 8-) */
 	d->name[sizeof(d->name) - 1] = '\0';
 
-	if (d->features == 0)
-		d->features = LIRC_CAN_REC_LIRCCODE;
-
 	if (LIRC_CAN_REC(d->features)) {
 		err = lirc_allocate_buffer(d);
 		if (err)
@@ -343,9 +334,6 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		 * for now, lirc_serial doesn't support mode changing either
 		 */
 		break;
-	case LIRC_GET_LENGTH:
-		result = put_user(d->code_length, (__u32 __user *)arg);
-		break;
 	default:
 		result = -ENOTTY;
 	}
include/media/lirc_dev.h +0 -4
index 857da67bd931..0a03dd9e5a68 100644
@@ -9,8 +9,6 @@
 #ifndef _LINUX_LIRC_DEV_H
 #define _LINUX_LIRC_DEV_H
 
-#define BUFLEN            16
-
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/ioctl.h>
@@ -117,7 +115,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
  *
  * @name:		used for logging
  * @minor:		the minor device (/dev/lircX) number for the device
- * @code_length:	length of a remote control key code expressed in bits
  * @features:		lirc compatible hardware features, like LIRC_MODE_RAW,
  *			LIRC_CAN\_\*, as defined at include/media/lirc.h.
  * @buffer_size:	Number of FIFO buffers with @chunk_size size.
@@ -142,7 +139,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
 struct lirc_dev {
 	char name[40];
 	unsigned int minor;
-	__u32 code_length;
 	__u32 features;
 
 	unsigned int buffer_size; /* in chunks holding one code each */
Signature · 1 line
2.13.6
author maintainer
#17 lore raw

PATCH v3 9/26 media: lirc: lirc interface should not be a raw decoder

In reply to Sean Young

The lirc user interface exists as a raw decoder, which does not make much sense for transmit-only devices.

In addition, we want to have lirc char devices for devices which do not use raw IR, i.e. scancode only devices.

Note that rc-code, lirc_dev, ir-lirc-codec are now calling functions of each other, so they've been merged into one module rc-core to avoid circular dependencies.

Since ir-lirc-codec no longer exists as separate codec module, there is no need for RC_DRIVER_IR_RAW_TX type drivers to call ir_raw_event_register().

---
 drivers/media/rc/Kconfig              |  29 ++------
 drivers/media/rc/Makefile             |   5 +-
 drivers/media/rc/ir-lirc-codec.c      | 136 ++++++++++------------------------
 drivers/media/rc/ir-mce_kbd-decoder.c |   6 --
 drivers/media/rc/lirc_dev.c           |  47 ++++--------
 drivers/media/rc/rc-core-priv.h       |  45 ++++++++---
 drivers/media/rc/rc-ir-raw.c          |  24 ++----
 drivers/media/rc/rc-main.c            |  52 ++++++-------
 include/media/lirc_dev.h              |  10 ---
 include/media/rc-core.h               |  33 +++++----
 10 files changed, 145 insertions(+), 242 deletions(-)
drivers/media/rc/Kconfig +8 -21
index 2a47139e5811..d84c0d3f7494 100644
@@ -16,34 +16,21 @@ menuconfig RC_CORE
 if RC_CORE
 source "drivers/media/rc/keymaps/Kconfig"
 
-menuconfig RC_DECODERS
-        bool "Remote controller decoders"
-	depends on RC_CORE
-	default y
-
-if RC_DECODERS
 config LIRC
-	tristate "LIRC interface driver"
+	bool "LIRC user interface"
 	depends on RC_CORE
-
 	---help---
-	   Enable this option to build the Linux Infrared Remote
-	   Control (LIRC) core device interface driver. The LIRC
-	   interface passes raw IR to and from userspace, where the
-	   LIRC daemon handles protocol decoding for IR reception and
-	   encoding for IR transmitting (aka "blasting").
+	   Enable this option to enable the Linux Infrared Remote
+	   Control user interface (e.g. /dev/lirc*). This interface
+	   passes raw IR to and from userspace, which is needed for
+	   IR transmitting (aka "blasting") and for the lirc daemon.
 
-config IR_LIRC_CODEC
-	tristate "Enable IR to LIRC bridge"
+menuconfig RC_DECODERS
+        bool "Remote controller decoders"
 	depends on RC_CORE
-	depends on LIRC
 	default y
 
-	---help---
-	   Enable this option to pass raw IR to and from userspace via
-	   the LIRC interface.
-
-
+if RC_DECODERS
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
 	depends on RC_CORE
drivers/media/rc/Makefile +2 -3
index a6bf6827b1ed..d2c7ea328c10 100644
@@ -1,9 +1,9 @@
-rc-core-objs	:= rc-main.o rc-ir-raw.o
 
 obj-y += keymaps/
 
 obj-$(CONFIG_RC_CORE) += rc-core.o
-obj-$(CONFIG_LIRC) += lirc_dev.o
+rc-core-y := rc-main.o rc-ir-raw.o
+rc-core-$(CONFIG_LIRC) += lirc_dev.o ir-lirc-codec.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
 obj-$(CONFIG_IR_RC6_DECODER) += ir-rc6-decoder.o
@@ -12,7 +12,6 @@ obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
 obj-$(CONFIG_IR_SANYO_DECODER) += ir-sanyo-decoder.o
 obj-$(CONFIG_IR_SHARP_DECODER) += ir-sharp-decoder.o
 obj-$(CONFIG_IR_MCE_KBD_DECODER) += ir-mce_kbd-decoder.o
-obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o
 obj-$(CONFIG_IR_XMP_DECODER) += ir-xmp-decoder.o
 
 # stand-alone IR receivers/transmitters
drivers/media/rc/ir-lirc-codec.c +38 -98

263 lines not on this page · raw message

drivers/media/rc/ir-mce_kbd-decoder.c +0 -6
index efa3b735dcc4..48eef43b0530 100644
@@ -358,9 +358,6 @@ static int ir_mce_kbd_register(struct rc_dev *dev)
 	struct input_dev *idev;
 	int i, ret;
 
-	if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
-		return 0;
-
 	idev = input_allocate_device();
 	if (!idev)
 		return -ENOMEM;
@@ -416,9 +413,6 @@ static int ir_mce_kbd_unregister(struct rc_dev *dev)
 	struct mce_kbd_dec *mce_kbd = &dev->raw->mce_kbd;
 	struct input_dev *idev = mce_kbd->idev;
 
-	if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
-		return 0;
-
 	del_timer_sync(&mce_kbd->rx_timeout);
 	input_unregister_device(idev);
 
drivers/media/rc/lirc_dev.c +13 -34

99 lines not on this page · raw message

drivers/media/rc/rc-core-priv.h +33 -12

69 lines not on this page · raw message

drivers/media/rc/rc-ir-raw.c +5 -19
index b84201cb012a..8d7fce5dd6ff 100644
@@ -40,6 +40,7 @@ static int ir_raw_event_thread(void *data)
 				if (raw->dev->enabled_protocols &
 				    handler->protocols || !handler->protocols)
 					handler->decode(raw->dev, ev);
+			ir_lirc_raw_event(raw->dev, ev);
 			raw->prev_ev = ev;
 		}
 		mutex_unlock(&ir_raw_handler_lock);
@@ -529,16 +530,9 @@ EXPORT_SYMBOL(ir_raw_encode_carrier);
  */
 int ir_raw_event_prepare(struct rc_dev *dev)
 {
-	static bool raw_init; /* 'false' default value, raw decoders loaded? */
-
 	if (!dev)
 		return -EINVAL;
 
-	if (!raw_init) {
-		request_module("ir-lirc-codec");
-		raw_init = true;
-	}
-
 	dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL);
 	if (!dev->raw)
 		return -ENOMEM;
@@ -557,19 +551,11 @@ int ir_raw_event_register(struct rc_dev *dev)
 	struct ir_raw_handler *handler;
 	struct task_struct *thread;
 
-	/*
-	 * raw transmitters do not need any event registration
-	 * because the event is coming from userspace
-	 */
-	if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
-		thread = kthread_run(ir_raw_event_thread, dev->raw, "rc%u",
-				     dev->minor);
+	thread = kthread_run(ir_raw_event_thread, dev->raw, "rc%u", dev->minor);
+	if (IS_ERR(thread))
+		return PTR_ERR(thread);
 
-		if (IS_ERR(thread))
-			return PTR_ERR(thread);
-
-		dev->raw->thread = thread;
-	}
+	dev->raw->thread = thread;
 
 	mutex_lock(&ir_raw_handler_lock);
 	list_add_tail(&dev->raw->list, &ir_raw_client_list);
drivers/media/rc/rc-main.c +27 -25

117 lines not on this page · raw message

include/media/lirc_dev.h +0 -10
index 0a03dd9e5a68..dd0c078796e8 100644
@@ -121,7 +121,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
  *			Only used if @rbuf is NULL.
  * @chunk_size:		Size of each FIFO buffer.
  *			Only used if @rbuf is NULL.
- * @data:		private per-driver data
  * @buf:		if %NULL, lirc_dev will allocate and manage the buffer,
  *			otherwise allocated by the caller which will
  *			have to write to the buffer by other means, like irq's
@@ -146,7 +145,6 @@ struct lirc_dev {
 	struct lirc_buffer *buf;
 	bool buf_internal;
 
-	void *data;
 	struct rc_dev *rdev;
 	const struct file_operations *fops;
 	struct module *owner;
@@ -168,14 +166,6 @@ int lirc_register_device(struct lirc_dev *d);
 
 void lirc_unregister_device(struct lirc_dev *d);
 
-/* Must be called in the open fop before lirc_get_pdata() can be used */
-void lirc_init_pdata(struct inode *inode, struct file *file);
-
-/* Returns the private data stored in the lirc_dev
- * associated with the given device file pointer.
- */
-void *lirc_get_pdata(struct file *file);
-
 /* default file operations
  * used by drivers if they override only some operations
  */
include/media/rc-core.h +19 -14
index b74b3165dc78..83aa5e423a13 100644
@@ -20,6 +20,7 @@
 #include <linux/kfifo.h>
 #include <linux/time.h>
 #include <linux/timer.h>
+#include <media/lirc_dev.h>
 #include <media/rc-map.h>
 
 extern int rc_core_debug;
@@ -115,6 +116,15 @@ enum rc_filter_type {
  * @max_timeout: maximum timeout supported by device
  * @rx_resolution : resolution (in ns) of input sampler
  * @tx_resolution: resolution (in ns) of output sampler
+ * @lirc_dev: lirc char device
+ * @carrier_low: when setting the carrier range, first the low end must be
+ *	set with an ioctl and then the high end with another ioctl
+ * @gap_start: time when gap starts
+ * @gap_duration: duration of initial gap
+ * @gap: true if we're in a gap
+ * @send_timeout_reports: report timeouts in lirc raw IR.
+ * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or
+ *	LIRC_MODE_PULSE
  * @change_protocol: allow changing the protocol used on hardware decoders
  * @open: callback to allow drivers to enable polling/irq when IR input device
  *	is opened.
@@ -175,6 +185,15 @@ struct rc_dev {
 	u32				max_timeout;
 	u32				rx_resolution;
 	u32				tx_resolution;
+#ifdef CONFIG_LIRC
+	struct lirc_dev			*lirc_dev;
+	int				carrier_low;
+	ktime_t				gap_start;
+	u64				gap_duration;
+	bool				gap;
+	bool				send_timeout_reports;
+	u8				send_mode;
+#endif
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
 	int				(*open)(struct rc_dev *dev);
 	void				(*close)(struct rc_dev *dev);
@@ -250,20 +269,6 @@ int devm_rc_register_device(struct device *parent, struct rc_dev *dev);
  */
 void rc_unregister_device(struct rc_dev *dev);
 
-/**
- * rc_open - Opens a RC device
- *
- * @rdev: pointer to struct rc_dev.
- */
-int rc_open(struct rc_dev *rdev);
-
-/**
- * rc_close - Closes a RC device
- *
- * @rdev: pointer to struct rc_dev.
- */
-void rc_close(struct rc_dev *rdev);
-
 void rc_repeat(struct rc_dev *dev);
 void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u32 scancode,
 		u8 toggle);
Signature · 1 line
2.13.6
author maintainer
#18 lore raw

PATCH v3 10/26 media: lirc: validate scancode for transmit

In reply to Sean Young

Ensure we reject an attempt to transmit invalid scancodes.

---
 drivers/media/rc/ir-lirc-codec.c | 10 ++++++++
 drivers/media/rc/rc-core-priv.h  |  1 +
 drivers/media/rc/rc-main.c       | 53 +++++++++++++++++++++++++---------------
 3 files changed, 44 insertions(+), 20 deletions(-)
drivers/media/rc/ir-lirc-codec.c +10 -0
index f2feca17c3a0..d9406fdbc9a3 100644
@@ -121,6 +121,16 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 		if (scan.flags || scan.keycode || scan.timestamp)
 			return -EINVAL;
 
+		/*
+		 * The scancode field in lirc_scancode is 64-bit simply
+		 * to future-proof it, since there are IR protocols encode
+		 * use more than 32 bits. For now only 32-bit protocols
+		 * are supported.
+		 */
+		if (scan.scancode > U32_MAX ||
+		    !rc_validate_scancode(scan.rc_proto, scan.scancode))
+			return -EINVAL;
+
 		if (dev->tx_scancode) {
 			ret = dev->tx_scancode(dev, &scan);
 			return ret < 0 ? ret : n;
drivers/media/rc/rc-core-priv.h +1 -0
index 21e515d34f64..a064c401fa38 100644
@@ -160,6 +160,7 @@ static inline bool is_timing_event(struct ir_raw_event ev)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
 
 /* functions for IR encoders */
+bool rc_validate_scancode(enum rc_proto proto, u32 scancode);
 
 static inline void init_ir_raw_event_duration(struct ir_raw_event *ev,
 					      unsigned int pulse,
drivers/media/rc/rc-main.c +33 -20

65 lines not on this page · raw message

Signature · 1 line
2.13.6
author maintainer
#19 lore raw

PATCH v3 11/26 media: rc: document and fix rc_validate_scancode()

In reply to Sean Young

For some IR protocols, some scancode values not valid, i.e. they're part of a different protocol variant.

---
 drivers/media/rc/rc-main.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/media/rc/rc-main.c +16 -2
index 38393f13822f..ae1df089c96f 100644
@@ -776,21 +776,35 @@ void rc_keydown_notimeout(struct rc_dev *dev, enum rc_proto protocol,
 EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
 
 /**
- * rc_validate_scancode() - checks that a scancode is valid for a protocol
+ * rc_validate_scancode() - checks that a scancode is valid for a protocol.
+ *	For nec, it should do the opposite of ir_nec_bytes_to_scancode()
  * @proto:	protocol
  * @scancode:	scancode
  */
 bool rc_validate_scancode(enum rc_proto proto, u32 scancode)
 {
 	switch (proto) {
+	/*
+	 * NECX has a 16-bit address; if the lower 8 bits match the upper
+	 * 8 bits inverted, then the address would match regular nec.
+	 */
 	case RC_PROTO_NECX:
 		if ((((scancode >> 16) ^ ~(scancode >> 8)) & 0xff) == 0)
 			return false;
 		break;
+	/*
+	 * NEC32 has a 16 bit address and 16 bit command. If the lower 8 bits
+	 * of the command match the upper 8 bits inverted, then it would
+	 * be either NEC or NECX.
+	 */
 	case RC_PROTO_NEC32:
-		if ((((scancode >> 24) ^ ~(scancode >> 16)) & 0xff) == 0)
+		if ((((scancode >> 8) ^ ~scancode) & 0xff) == 0)
 			return false;
 		break;
+	/*
+	 * If the customer code (top 32-bit) is 0x800f, it is MCE else it
+	 * is regular mode-6a 32 bit
+	 */
 	case RC_PROTO_RC6_MCE:
 		if ((scancode & 0xffff0000) != 0x800f0000)
 			return false;
Signature · 1 line
2.13.6
author maintainer
#20 lore raw

PATCH v3 12/26 media: lirc: merge lirc_dev_fop_ioctl and ir_lirc_ioctl

In reply to Sean Young

Calculate lirc features when necessary, and add LIRC_{S,G}ET_REC_MODE cases to ir_lirc_ioctl.

This makes lirc_dev_fop_ioctl() unnecessary since all cases are already handled by ir_lirc_ioctl().

---
 drivers/media/rc/ir-lirc-codec.c | 85 +++++++++++++++++++++++-----------------
 drivers/media/rc/lirc_dev.c      | 62 ++---------------------------
 include/media/lirc_dev.h         |  4 --
 3 files changed, 53 insertions(+), 98 deletions(-)
drivers/media/rc/ir-lirc-codec.c +50 -35
index d9406fdbc9a3..05b2c1d5c0e6 100644
@@ -236,8 +236,57 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 	}
 
 	switch (cmd) {
+	case LIRC_GET_FEATURES:
+		if (dev->driver_type == RC_DRIVER_IR_RAW) {
+			val |= LIRC_CAN_REC_MODE2;
+			if (dev->rx_resolution)
+				val |= LIRC_CAN_GET_REC_RESOLUTION;
+		}
+
+		if (dev->tx_scancode)
+			val |= LIRC_CAN_SEND_SCANCODE;
+
+		if (dev->tx_ir) {
+			val |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE;
+			if (dev->s_tx_mask)
+				val |= LIRC_CAN_SET_TRANSMITTER_MASK;
+			if (dev->s_tx_carrier)
+				val |= LIRC_CAN_SET_SEND_CARRIER;
+			if (dev->s_tx_duty_cycle)
+				val |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+		}
+
+		if (dev->s_rx_carrier_range)
+			val |= LIRC_CAN_SET_REC_CARRIER |
+				LIRC_CAN_SET_REC_CARRIER_RANGE;
+
+		if (dev->s_learning_mode)
+			val |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
+
+		if (dev->s_carrier_report)
+			val |= LIRC_CAN_MEASURE_CARRIER;
+
+		if (dev->max_timeout)
+			val |= LIRC_CAN_SET_REC_TIMEOUT;
+
+		break;
 
 	/* mode support */
+	case LIRC_GET_REC_MODE:
+		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
+			return -ENOTTY;
+
+		val = LIRC_MODE_MODE2;
+		break;
+
+	case LIRC_SET_REC_MODE:
+		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
+			return -ENOTTY;
+
+		if (val != LIRC_MODE_MODE2)
+			return -EINVAL;
+		return 0;
+
 	case LIRC_GET_SEND_MODE:
 		if (!dev->tx_ir && !dev->tx_scancode)
 			return -ENOTTY;
@@ -361,7 +410,7 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 		break;
 
 	default:
-		return lirc_dev_fop_ioctl(filep, cmd, arg);
+		return -ENOTTY;
 	}
 
 	if (_IOC_DIR(cmd) & _IOC_READ)
@@ -388,47 +437,13 @@ int ir_lirc_register(struct rc_dev *dev)
 {
 	struct lirc_dev *ldev;
 	int rc = -ENOMEM;
-	unsigned long features = 0;
 
 	ldev = lirc_allocate_device();
 	if (!ldev)
 		return rc;
 
-	if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
-		features |= LIRC_CAN_REC_MODE2;
-		if (dev->rx_resolution)
-			features |= LIRC_CAN_GET_REC_RESOLUTION;
-	}
-
-	if (dev->tx_scancode)
-		features |= LIRC_CAN_SEND_SCANCODE;
-
-	if (dev->tx_ir) {
-		features |= LIRC_CAN_SEND_PULSE | LIRC_CAN_SEND_SCANCODE;
-		if (dev->s_tx_mask)
-			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
-		if (dev->s_tx_carrier)
-			features |= LIRC_CAN_SET_SEND_CARRIER;
-		if (dev->s_tx_duty_cycle)
-			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
-	}
-
-	if (dev->s_rx_carrier_range)
-		features |= LIRC_CAN_SET_REC_CARRIER |
-			LIRC_CAN_SET_REC_CARRIER_RANGE;
-
-	if (dev->s_learning_mode)
-		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
-
-	if (dev->s_carrier_report)
-		features |= LIRC_CAN_MEASURE_CARRIER;
-
-	if (dev->max_timeout)
-		features |= LIRC_CAN_SET_REC_TIMEOUT;
-
 	snprintf(ldev->name, sizeof(ldev->name), "ir-lirc-codec (%s)",
 		 dev->driver_name);
-	ldev->features = features;
 	ldev->buf = NULL;
 	ldev->chunk_size = sizeof(int);
 	ldev->buffer_size = LIRCBUF_SIZE;
drivers/media/rc/lirc_dev.c +3 -59

86 lines not on this page · raw message

include/media/lirc_dev.h +0 -4
index dd0c078796e8..86a3cf798775 100644
@@ -115,8 +115,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
  *
  * @name:		used for logging
  * @minor:		the minor device (/dev/lircX) number for the device
- * @features:		lirc compatible hardware features, like LIRC_MODE_RAW,
- *			LIRC_CAN\_\*, as defined at include/media/lirc.h.
  * @buffer_size:	Number of FIFO buffers with @chunk_size size.
  *			Only used if @rbuf is NULL.
  * @chunk_size:		Size of each FIFO buffer.
@@ -138,7 +136,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
 struct lirc_dev {
 	char name[40];
 	unsigned int minor;
-	__u32 features;
 
 	unsigned int buffer_size; /* in chunks holding one code each */
 	unsigned int chunk_size;
@@ -172,7 +169,6 @@ void lirc_unregister_device(struct lirc_dev *d);
 int lirc_dev_fop_open(struct inode *inode, struct file *file);
 int lirc_dev_fop_close(struct inode *inode, struct file *file);
 unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
-long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 ssize_t lirc_dev_fop_read(struct file *file, char __user *buffer, size_t length,
 			  loff_t *ppos);
 #endif
Signature · 1 line
2.13.6
author maintainer
#21 lore raw

PATCH v3 13/26 media: lirc: use kfifo rather than lirc_buffer for raw IR

In reply to Sean Young

Since the only mode lirc devices can handle is raw IR, handle this in a plain kfifo.

Remove lirc_buffer since this is no longer needed.

---
 drivers/media/rc/ir-lirc-codec.c |  79 +++++++++++++---
 drivers/media/rc/lirc_dev.c      | 199 ++++-----------------------------------
 include/media/lirc_dev.h         | 109 ---------------------
 include/media/rc-core.h          |   4 +
 4 files changed, 85 insertions(+), 306 deletions(-)
drivers/media/rc/ir-lirc-codec.c +65 -14
index 05b2c1d5c0e6..7dc3fe8a5a96 100644
@@ -66,8 +66,6 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
 	} else {
 
 		if (dev->gap) {
-			int gap_sample;
-
 			dev->gap_duration += ktime_to_ns(ktime_sub(ktime_get(),
 							 dev->gap_start));
 
@@ -76,9 +74,7 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
 			dev->gap_duration = min_t(u64, dev->gap_duration,
 						  LIRC_VALUE_MASK);
 
-			gap_sample = LIRC_SPACE(dev->gap_duration);
-			lirc_buffer_write(dev->lirc_dev->buf,
-					  (unsigned char *)&gap_sample);
+			kfifo_put(&dev->rawir, LIRC_SPACE(dev->gap_duration));
 			dev->gap = false;
 		}
 
@@ -88,10 +84,8 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
 			   TO_US(ev.duration), TO_STR(ev.pulse));
 	}
 
-	lirc_buffer_write(dev->lirc_dev->buf,
-			  (unsigned char *) &sample);
-
-	wake_up(&dev->lirc_dev->buf->wait_poll);
+	kfifo_put(&dev->rawir, sample);
+	wake_up_poll(&dev->wait_poll, POLLIN | POLLRDNORM);
 }
 
 static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
@@ -419,6 +413,66 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 	return ret;
 }
 
+static unsigned int ir_lirc_poll(struct file *file,
+				 struct poll_table_struct *wait)
+{
+	struct rc_dev *rcdev = file->private_data;
+	struct lirc_dev *d = rcdev->lirc_dev;
+	unsigned int events = 0;
+
+	poll_wait(file, &rcdev->wait_poll, wait);
+
+	if (!d->attached)
+		events = POLLHUP | POLLERR;
+	else if (rcdev->driver_type == RC_DRIVER_IR_RAW &&
+		 !kfifo_is_empty(&rcdev->rawir))
+		events = POLLIN | POLLRDNORM;
+
+	return events;
+}
+
+static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
+			    size_t length, loff_t *ppos)
+{
+	struct rc_dev *rcdev = file->private_data;
+	struct lirc_dev *d = rcdev->lirc_dev;
+	unsigned int copied;
+	int ret;
+
+	if (rcdev->driver_type == RC_DRIVER_IR_RAW_TX)
+		return -EINVAL;
+
+	if (length < sizeof(unsigned int) || length % sizeof(unsigned int))
+		return -EINVAL;
+
+	if (!d->attached)
+		return -ENODEV;
+
+	do {
+		if (kfifo_is_empty(&rcdev->rawir)) {
+			if (file->f_flags & O_NONBLOCK)
+				return -EAGAIN;
+
+			ret = wait_event_interruptible(rcdev->wait_poll,
+					!kfifo_is_empty(&rcdev->rawir) ||
+					!d->attached);
+			if (ret)
+				return ret;
+		}
+
+		if (!d->attached)
+			return -ENODEV;
+
+		mutex_lock(&rcdev->lock);
+		ret = kfifo_to_user(&rcdev->rawir, buffer, length, &copied);
+		mutex_unlock(&rcdev->lock);
+		if (ret)
+			return ret;
+	} while (copied == 0);
+
+	return copied;
+}
+
 static const struct file_operations lirc_fops = {
 	.owner		= THIS_MODULE,
 	.write		= ir_lirc_transmit_ir,
@@ -426,8 +480,8 @@ static const struct file_operations lirc_fops = {
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ir_lirc_ioctl,
 #endif
-	.read		= lirc_dev_fop_read,
-	.poll		= lirc_dev_fop_poll,
+	.read		= ir_lirc_read,
+	.poll		= ir_lirc_poll,
 	.open		= lirc_dev_fop_open,
 	.release	= lirc_dev_fop_close,
 	.llseek		= no_llseek,
@@ -444,9 +498,6 @@ int ir_lirc_register(struct rc_dev *dev)
 
 	snprintf(ldev->name, sizeof(ldev->name), "ir-lirc-codec (%s)",
 		 dev->driver_name);
-	ldev->buf = NULL;
-	ldev->chunk_size = sizeof(int);
-	ldev->buffer_size = LIRCBUF_SIZE;
 	ldev->fops = &lirc_fops;
 	ldev->dev.parent = &dev->dev;
 	ldev->rdev = dev;
drivers/media/rc/lirc_dev.c +16 -183

254 lines not on this page · raw message

include/media/lirc_dev.h +0 -109

130 lines not on this page · raw message

include/media/rc-core.h +4 -0
index 83aa5e423a13..d886ac56015b 100644
@@ -123,6 +123,8 @@ enum rc_filter_type {
  * @gap_duration: duration of initial gap
  * @gap: true if we're in a gap
  * @send_timeout_reports: report timeouts in lirc raw IR.
+ * @rawir: queue for incoming raw IR
+ * @wait_poll: poll struct for lirc device
  * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or
  *	LIRC_MODE_PULSE
  * @change_protocol: allow changing the protocol used on hardware decoders
@@ -192,6 +194,8 @@ struct rc_dev {
 	u64				gap_duration;
 	bool				gap;
 	bool				send_timeout_reports;
+	DECLARE_KFIFO_PTR(rawir, unsigned int);
+	wait_queue_head_t		wait_poll;
 	u8				send_mode;
 #endif
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
Signature · 1 line
2.13.6
author maintainer
#22 lore raw

PATCH v3 14/26 media: lirc: move lirc_dev->attached to rc_dev->registered

In reply to Sean Young

This is done to further remove the lirc kernel api. Ensure that every fops checks for this.

---
 drivers/media/rc/ir-lirc-codec.c | 16 ++++++++++------
 drivers/media/rc/lirc_dev.c      |  4 +---
 drivers/media/rc/rc-main.c       |  8 ++++++++
 include/media/lirc_dev.h         |  2 --
 include/media/rc-core.h          |  3 +++
 5 files changed, 22 insertions(+), 11 deletions(-)
drivers/media/rc/ir-lirc-codec.c +10 -6
index 7dc3fe8a5a96..60ff8f188e6f 100644
@@ -101,6 +101,9 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 	unsigned int duration = 0; /* signal duration in us */
 	int i;
 
+	if (!dev->registered)
+		return -ENODEV;
+
 	start = ktime_get();
 
 	if (dev->send_mode == LIRC_MODE_SCANCODE) {
@@ -229,6 +232,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 			return ret;
 	}
 
+	if (!dev->registered)
+		return -ENODEV;
+
 	switch (cmd) {
 	case LIRC_GET_FEATURES:
 		if (dev->driver_type == RC_DRIVER_IR_RAW) {
@@ -417,12 +423,11 @@ static unsigned int ir_lirc_poll(struct file *file,
 				 struct poll_table_struct *wait)
 {
 	struct rc_dev *rcdev = file->private_data;
-	struct lirc_dev *d = rcdev->lirc_dev;
 	unsigned int events = 0;
 
 	poll_wait(file, &rcdev->wait_poll, wait);
 
-	if (!d->attached)
+	if (!rcdev->registered)
 		events = POLLHUP | POLLERR;
 	else if (rcdev->driver_type == RC_DRIVER_IR_RAW &&
 		 !kfifo_is_empty(&rcdev->rawir))
@@ -435,7 +440,6 @@ static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
 			    size_t length, loff_t *ppos)
 {
 	struct rc_dev *rcdev = file->private_data;
-	struct lirc_dev *d = rcdev->lirc_dev;
 	unsigned int copied;
 	int ret;
 
@@ -445,7 +449,7 @@ static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
 	if (length < sizeof(unsigned int) || length % sizeof(unsigned int))
 		return -EINVAL;
 
-	if (!d->attached)
+	if (!rcdev->registered)
 		return -ENODEV;
 
 	do {
@@ -455,12 +459,12 @@ static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
 
 			ret = wait_event_interruptible(rcdev->wait_poll,
 					!kfifo_is_empty(&rcdev->rawir) ||
-					!d->attached);
+					!rcdev->registered);
 			if (ret)
 				return ret;
 		}
 
-		if (!d->attached)
+		if (!rcdev->registered)
 			return -ENODEV;
 
 		mutex_lock(&rcdev->lock);
drivers/media/rc/lirc_dev.c +1 -3
index 9a0ad8d9a0cb..22171267aa90 100644
@@ -122,7 +122,6 @@ int lirc_register_device(struct lirc_dev *d)
 
 	cdev_init(&d->cdev, d->fops);
 	d->cdev.owner = d->owner;
-	d->attached = true;
 
 	err = cdev_device_add(&d->cdev, &d->dev);
 	if (err) {
@@ -153,7 +152,6 @@ void lirc_unregister_device(struct lirc_dev *d)
 
 	mutex_lock(&d->mutex);
 
-	d->attached = false;
 	if (d->open) {
 		dev_dbg(&d->dev, LOGHEAD "releasing opened driver\n",
 			d->name, d->minor);
@@ -180,7 +178,7 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file)
 	if (retval)
 		return retval;
 
-	if (!d->attached) {
+	if (!rcdev->registered) {
 		retval = -ENODEV;
 		goto out;
 	}
drivers/media/rc/rc-main.c +8 -0
index ae1df089c96f..9e73899b5994 100644
@@ -1809,6 +1809,8 @@ int rc_register_device(struct rc_dev *dev)
 			goto out_lirc;
 	}
 
+	dev->registered = true;
+
 	IR_dprintk(1, "Registered rc%u (driver: %s)\n",
 		   dev->minor,
 		   dev->driver_name ? dev->driver_name : "unknown");
@@ -1871,6 +1873,12 @@ void rc_unregister_device(struct rc_dev *dev)
 
 	rc_free_rx_device(dev);
 
+	dev->registered = false;
+
+	/*
+	 * lirc device should be freed with dev->registered = false, so
+	 * that userspace polling will get notified.
+	 */
 	if (dev->driver_type != RC_DRIVER_SCANCODE)
 		ir_lirc_unregister(dev);
 
include/media/lirc_dev.h +0 -2
index 14d3eb36672e..5782add67edd 100644
@@ -26,7 +26,6 @@
  * @rdev:		&struct rc_dev associated with the device
  * @fops:		&struct file_operations for the device
  * @owner:		the module owning this struct
- * @attached:		if the device is still live
  * @open:		open count for the device's chardev
  * @mutex:		serialises file_operations calls
  * @dev:		&struct device assigned to the device
@@ -40,7 +39,6 @@ struct lirc_dev {
 	const struct file_operations *fops;
 	struct module *owner;
 
-	bool attached;
 	int open;
 
 	struct mutex mutex; /* protect from simultaneous accesses */
include/media/rc-core.h +3 -0
index d886ac56015b..17131762fb75 100644
@@ -127,6 +127,8 @@ enum rc_filter_type {
  * @wait_poll: poll struct for lirc device
  * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or
  *	LIRC_MODE_PULSE
+ * @registered: set to true by rc_register_device(), false by
+ *	rc_unregister_device
  * @change_protocol: allow changing the protocol used on hardware decoders
  * @open: callback to allow drivers to enable polling/irq when IR input device
  *	is opened.
@@ -198,6 +200,7 @@ struct rc_dev {
 	wait_queue_head_t		wait_poll;
 	u8				send_mode;
 #endif
+	bool				registered;
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
 	int				(*open)(struct rc_dev *dev);
 	void				(*close)(struct rc_dev *dev);
Signature · 1 line
2.13.6
author maintainer
#23 lore raw

PATCH v3 15/26 media: lirc: do not call rc_close() on unregistered devices

In reply to Sean Young

If a lirc chardev is held open after a device is unplugged, rc_close() will be called after rc_unregister_device(). The driver is not expecting any calls at this point, and the iguanair driver causes an oops in this scenario.

---
 drivers/media/rc/rc-main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/rc/rc-main.c +1 -1
index 9e73899b5994..9a8fc86b0835 100644
@@ -885,7 +885,7 @@ void rc_close(struct rc_dev *rdev)
 	if (rdev) {
 		mutex_lock(&rdev->lock);
 
-		if (!--rdev->users && rdev->close != NULL)
+		if (!--rdev->users && rdev->close && rdev->registered)
 			rdev->close(rdev);
 
 		mutex_unlock(&rdev->lock);
Signature · 1 line
2.13.6
author maintainer
#24 lore raw

PATCH v3 16/26 media: lirc: create rc-core open and close lirc functions

In reply to Sean Young

Replace the generic kernel lirc api with ones which use rc-core, further reducing the lirc_dev members.

---
 drivers/media/rc/ir-lirc-codec.c | 59 ++++++++++++++++++++++++++++++++--
 drivers/media/rc/lirc_dev.c      | 68 ++--------------------------------------
 include/media/lirc_dev.h         | 11 -------
 include/media/rc-core.h          |  2 ++
 4 files changed, 62 insertions(+), 78 deletions(-)
drivers/media/rc/ir-lirc-codec.c +57 -2
index 60ff8f188e6f..f852ec231f4e 100644
@@ -88,6 +88,61 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
 	wake_up_poll(&dev->wait_poll, POLLIN | POLLRDNORM);
 }
 
+static int ir_lirc_open(struct inode *inode, struct file *file)
+{
+	struct lirc_dev *d = container_of(inode->i_cdev, struct lirc_dev, cdev);
+	struct rc_dev *dev = d->rdev;
+	int retval;
+
+	retval = rc_open(dev);
+	if (retval)
+		return retval;
+
+	retval = mutex_lock_interruptible(&dev->lock);
+	if (retval)
+		goto out_rc;
+
+	if (!dev->registered) {
+		retval = -ENODEV;
+		goto out_unlock;
+	}
+
+	if (dev->lirc_open) {
+		retval = -EBUSY;
+		goto out_unlock;
+	}
+
+	if (dev->driver_type == RC_DRIVER_IR_RAW)
+		kfifo_reset_out(&dev->rawir);
+
+	dev->lirc_open++;
+	file->private_data = dev;
+
+	nonseekable_open(inode, file);
+	mutex_unlock(&dev->lock);
+
+	return 0;
+
+out_unlock:
+	mutex_unlock(&dev->lock);
+out_rc:
+	rc_close(dev);
+	return retval;
+}
+
+static int ir_lirc_close(struct inode *inode, struct file *file)
+{
+	struct rc_dev *dev = file->private_data;
+
+	mutex_lock(&dev->lock);
+	dev->lirc_open--;
+	mutex_unlock(&dev->lock);
+
+	rc_close(dev);
+
+	return 0;
+}
+
 static ssize_t ir_lirc_transmit_ir(struct file *file, const char __user *buf,
 				   size_t n, loff_t *ppos)
 {
@@ -486,8 +541,8 @@ static const struct file_operations lirc_fops = {
 #endif
 	.read		= ir_lirc_read,
 	.poll		= ir_lirc_poll,
-	.open		= lirc_dev_fop_open,
-	.release	= lirc_dev_fop_close,
+	.open		= ir_lirc_open,
+	.release	= ir_lirc_close,
 	.llseek		= no_llseek,
 };
 
drivers/media/rc/lirc_dev.c +3 -65

92 lines not on this page · raw message

include/media/lirc_dev.h +0 -11
index 5782add67edd..b45af81b4633 100644
@@ -26,8 +26,6 @@
  * @rdev:		&struct rc_dev associated with the device
  * @fops:		&struct file_operations for the device
  * @owner:		the module owning this struct
- * @open:		open count for the device's chardev
- * @mutex:		serialises file_operations calls
  * @dev:		&struct device assigned to the device
  * @cdev:		&struct cdev assigned to the device
  */
@@ -39,10 +37,6 @@ struct lirc_dev {
 	const struct file_operations *fops;
 	struct module *owner;
 
-	int open;
-
-	struct mutex mutex; /* protect from simultaneous accesses */
-
 	struct device dev;
 	struct cdev cdev;
 };
@@ -55,9 +49,4 @@ int lirc_register_device(struct lirc_dev *d);
 
 void lirc_unregister_device(struct lirc_dev *d);
 
-/* default file operations
- * used by drivers if they override only some operations
- */
-int lirc_dev_fop_open(struct inode *inode, struct file *file);
-int lirc_dev_fop_close(struct inode *inode, struct file *file);
 #endif
include/media/rc-core.h +2 -0
index 17131762fb75..f0ee1ba01a47 100644
@@ -117,6 +117,7 @@ enum rc_filter_type {
  * @rx_resolution : resolution (in ns) of input sampler
  * @tx_resolution: resolution (in ns) of output sampler
  * @lirc_dev: lirc char device
+ * @lirc_open: count of the number of times the device has been opened
  * @carrier_low: when setting the carrier range, first the low end must be
  *	set with an ioctl and then the high end with another ioctl
  * @gap_start: time when gap starts
@@ -191,6 +192,7 @@ struct rc_dev {
 	u32				tx_resolution;
 #ifdef CONFIG_LIRC
 	struct lirc_dev			*lirc_dev;
+	int				lirc_open;
 	int				carrier_low;
 	ktime_t				gap_start;
 	u64				gap_duration;
Signature · 1 line
2.13.6
author maintainer
#25 lore raw

PATCH v3 17/26 media: lirc: remove name from lirc_dev

In reply to Sean Young

This is a duplicate of rcdev->driver_name.

---
 Documentation/media/uapi/rc/lirc-dev-intro.rst | 2 +-
 drivers/media/rc/ir-lirc-codec.c               | 2 --
 drivers/media/rc/lirc_dev.c                    | 9 +++------
 include/media/lirc_dev.h                       | 2 --
 4 files changed, 4 insertions(+), 11 deletions(-)
Documentation/media/uapi/rc/lirc-dev-intro.rst +1 -1
index 3cacf9aeac40..a3fa3c1ef169 100644
@@ -18,7 +18,7 @@ Example dmesg output upon a driver registering w/LIRC:
 
     $ dmesg |grep lirc_dev
     lirc_dev: IR Remote Control driver registered, major 248
-    rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
+    rc rc0: lirc_dev: driver mceusb registered at minor = 0
 
 What you should see for a chardev:
 
drivers/media/rc/ir-lirc-codec.c +0 -2
index f852ec231f4e..4411a3d0a778 100644
@@ -555,8 +555,6 @@ int ir_lirc_register(struct rc_dev *dev)
 	if (!ldev)
 		return rc;
 
-	snprintf(ldev->name, sizeof(ldev->name), "ir-lirc-codec (%s)",
-		 dev->driver_name);
 	ldev->fops = &lirc_fops;
 	ldev->dev.parent = &dev->dev;
 	ldev->rdev = dev;
drivers/media/rc/lirc_dev.c +3 -6
index 32124fb5c88e..4ac74fd86fd4 100644
@@ -101,9 +101,6 @@ int lirc_register_device(struct lirc_dev *d)
 		return -EINVAL;
 	}
 
-	/* some safety check 8-) */
-	d->name[sizeof(d->name) - 1] = '\0';
-
 	if (rcdev->driver_type == RC_DRIVER_IR_RAW) {
 		if (kfifo_alloc(&rcdev->rawir, MAX_IR_EVENT_SIZE, GFP_KERNEL))
 			return -ENOMEM;
@@ -131,7 +128,7 @@ int lirc_register_device(struct lirc_dev *d)
 	get_device(d->dev.parent);
 
 	dev_info(&d->dev, "lirc_dev: driver %s registered at minor = %d\n",
-		 d->name, d->minor);
+		 rcdev->driver_name, d->minor);
 
 	return 0;
 }
@@ -147,13 +144,13 @@ void lirc_unregister_device(struct lirc_dev *d)
 	rcdev = d->rdev;
 
 	dev_dbg(&d->dev, "lirc_dev: driver %s unregistered from minor = %d\n",
-		d->name, d->minor);
+		rcdev->driver_name, d->minor);
 
 	mutex_lock(&rcdev->lock);
 
 	if (rcdev->lirc_open) {
 		dev_dbg(&d->dev, LOGHEAD "releasing opened driver\n",
-			d->name, d->minor);
+			rcdev->driver_name, d->minor);
 		wake_up_poll(&rcdev->wait_poll, POLLHUP);
 	}
 
include/media/lirc_dev.h +0 -2
index b45af81b4633..d12e1d1c3d67 100644
@@ -21,7 +21,6 @@
 /**
  * struct lirc_dev - represents a LIRC device
  *
- * @name:		used for logging
  * @minor:		the minor device (/dev/lircX) number for the device
  * @rdev:		&struct rc_dev associated with the device
  * @fops:		&struct file_operations for the device
@@ -30,7 +29,6 @@
  * @cdev:		&struct cdev assigned to the device
  */
 struct lirc_dev {
-	char name[40];
 	unsigned int minor;
 
 	struct rc_dev *rdev;
Signature · 1 line
2.13.6
author maintainer
#26 lore raw

PATCH v3 18/26 media: lirc: remove last remnants of lirc kapi

In reply to Sean Young

rc-core has replaced the lirc kapi many years ago, and now with the last driver ported to rc-core, we can finally remove it.

Note this has no effect on userspace.

All future IR drivers should use the rc-core api.

---
 Documentation/media/kapi/rc-core.rst |   5 --
 drivers/media/rc/ir-lirc-codec.c     |  45 +----------
 drivers/media/rc/lirc_dev.c          | 147 ++++++++++++-----------------------
 drivers/media/rc/rc-core-priv.h      |   3 +
 drivers/media/rc/rc-main.c           |   1 -
 include/media/lirc_dev.h             |  50 ------------
 include/media/rc-core.h              |   8 +-
 7 files changed, 63 insertions(+), 196 deletions(-)
 delete mode 100644 include/media/lirc_dev.h
Documentation/media/kapi/rc-core.rst +0 -5
index a45895886257..41c2256dbf6a 100644
@@ -7,8 +7,3 @@ Remote Controller core
 .. kernel-doc:: include/media/rc-core.h
 
 .. kernel-doc:: include/media/rc-map.h
-
-LIRC
-~~~~
-
-.. kernel-doc:: include/media/lirc_dev.h
drivers/media/rc/ir-lirc-codec.c +4 -41

69 lines not on this page · raw message

drivers/media/rc/lirc_dev.c +51 -96

211 lines not on this page · raw message

drivers/media/rc/rc-core-priv.h +3 -0
index a064c401fa38..a8ca6d7ff551 100644
@@ -16,6 +16,7 @@
 #ifndef _RC_CORE_PRIV
 #define _RC_CORE_PRIV
 
+#define	RC_DEV_MAX		256
 /* Define the max number of pulse/space transitions to buffer */
 #define	MAX_IR_EVENT_SIZE	512
 
@@ -287,6 +288,8 @@ void lirc_dev_exit(void);
 void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev);
 int ir_lirc_register(struct rc_dev *dev);
 void ir_lirc_unregister(struct rc_dev *dev);
+
+extern const struct file_operations lirc_fops;
 #else
 static inline int lirc_dev_init(void) { return 0; }
 static inline void lirc_dev_exit(void) {}
drivers/media/rc/rc-main.c +0 -1
index 9a8fc86b0835..e5027ac3c8fb 100644
@@ -29,7 +29,6 @@
 /* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
 #define IR_TAB_MIN_SIZE	256
 #define IR_TAB_MAX_SIZE	8192
-#define RC_DEV_MAX	256
 
 static const struct {
 	const char *name;
include/media/lirc_dev.h deleted +0 -50

50 lines not on this page · raw message

include/media/rc-core.h +5 -3
index f0ee1ba01a47..e3db561a9bd7 100644
@@ -17,10 +17,10 @@
 #define _RC_CORE
 
 #include <linux/spinlock.h>
+#include <linux/cdev.h>
 #include <linux/kfifo.h>
 #include <linux/time.h>
 #include <linux/timer.h>
-#include <media/lirc_dev.h>
 #include <media/rc-map.h>
 
 extern int rc_core_debug;
@@ -116,7 +116,8 @@ enum rc_filter_type {
  * @max_timeout: maximum timeout supported by device
  * @rx_resolution : resolution (in ns) of input sampler
  * @tx_resolution: resolution (in ns) of output sampler
- * @lirc_dev: lirc char device
+ * @lirc_dev: lirc device
+ * @lirc_cdev: lirc char cdev
  * @lirc_open: count of the number of times the device has been opened
  * @carrier_low: when setting the carrier range, first the low end must be
  *	set with an ioctl and then the high end with another ioctl
@@ -191,7 +192,8 @@ struct rc_dev {
 	u32				rx_resolution;
 	u32				tx_resolution;
 #ifdef CONFIG_LIRC
-	struct lirc_dev			*lirc_dev;
+	struct device			lirc_dev;
+	struct cdev			lirc_cdev;
 	int				lirc_open;
 	int				carrier_low;
 	ktime_t				gap_start;
Signature · 1 line
2.13.6
author maintainer
#27 lore raw

PATCH v3 19/26 media: lirc: implement reading scancode

In reply to Sean Young

This implements LIRC_MODE_SCANCODE reading from the lirc device. The scancode can be read from the input device too, but with this interface you get the rc protocol, keycode, toggle and repeat status in addition to just the scancode.

int main()

{
	int fd, mode, rc;
	fd = open("/dev/lirc0", O_RDWR);

	mode = LIRC_MODE_SCANCODE;
	if (ioctl(fd, LIRC_SET_REC_MODE, &mode)) {
		// kernel too old or lirc does not support transmit
	}
	struct lirc_scancode scancode;
	while (read(fd, &scancode, sizeof(scancode)) == sizeof(scancode)) {
		printf("protocol:%d scancode:0x%x toggle:%d repeat:%d\n",
			scancode.rc_proto, scancode.scancode,
			!!(scancode.flags & LIRC_SCANCODE_FLAG_TOGGLE),
			!!(scancode.flags & LIRC_SCANCODE_FLAG_REPEAT));
	}
	close(fd);
}
---
 drivers/media/rc/ir-lirc-codec.c      | 102 +++++++++++++++++++++++++++++-----
 drivers/media/rc/ir-mce_kbd-decoder.c |   5 ++
 drivers/media/rc/lirc_dev.c           |  13 +++++
 drivers/media/rc/rc-core-priv.h       |   3 +
 drivers/media/rc/rc-main.c            |   7 +++
 include/media/rc-core.h               |   5 ++
 6 files changed, 120 insertions(+), 15 deletions(-)
drivers/media/rc/ir-lirc-codec.c +87 -15
index 9127544883ed..92674bca8225 100644
@@ -88,6 +88,21 @@ void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev)
 	wake_up_poll(&dev->wait_poll, POLLIN | POLLRDNORM);
 }
 
+/**
+ * ir_lirc_scancode_event() - Send scancode data to lirc to be relayed to
+ *		userspace
+ * @dev:	the struct rc_dev descriptor of the device
+ * @lsc		the struct lirc_scancode describing the decoded scancode
+ */
+void ir_lirc_scancode_event(struct rc_dev *dev, struct lirc_scancode *lsc)
+{
+	lsc->timestamp = ktime_get_ns();
+
+	if (kfifo_put(&dev->scancodes, *lsc))
+		wake_up_poll(&dev->wait_poll, POLLIN | POLLRDNORM);
+}
+EXPORT_SYMBOL_GPL(ir_lirc_scancode_event);
+
 static int ir_lirc_open(struct inode *inode, struct file *file)
 {
 	struct rc_dev *dev = container_of(inode->i_cdev, struct rc_dev,
@@ -114,6 +129,8 @@ static int ir_lirc_open(struct inode *inode, struct file *file)
 
 	if (dev->driver_type == RC_DRIVER_IR_RAW)
 		kfifo_reset_out(&dev->rawir);
+	if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
+		kfifo_reset_out(&dev->scancodes);
 
 	dev->lirc_open++;
 	file->private_data = dev;
@@ -293,7 +310,7 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 	switch (cmd) {
 	case LIRC_GET_FEATURES:
 		if (dev->driver_type == RC_DRIVER_IR_RAW) {
-			val |= LIRC_CAN_REC_MODE2;
+			val |= LIRC_CAN_REC_MODE2 | LIRC_CAN_REC_SCANCODE;
 			if (dev->rx_resolution)
 				val |= LIRC_CAN_GET_REC_RESOLUTION;
 		}
@@ -331,15 +348,17 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
 			return -ENOTTY;
 
-		val = LIRC_MODE_MODE2;
+		val = dev->rec_mode;
 		break;
 
 	case LIRC_SET_REC_MODE:
 		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
 			return -ENOTTY;
 
-		if (val != LIRC_MODE_MODE2)
+		if (!(val == LIRC_MODE_MODE2 || val == LIRC_MODE_SCANCODE))
 			return -EINVAL;
+
+		dev->rec_mode = val;
 		return 0;
 
 	case LIRC_GET_SEND_MODE:
@@ -482,31 +501,31 @@ static unsigned int ir_lirc_poll(struct file *file,
 
 	poll_wait(file, &rcdev->wait_poll, wait);
 
-	if (!rcdev->registered)
+	if (!rcdev->registered) {
 		events = POLLHUP | POLLERR;
-	else if (rcdev->driver_type == RC_DRIVER_IR_RAW &&
-		 !kfifo_is_empty(&rcdev->rawir))
-		events = POLLIN | POLLRDNORM;
+	} else if (rcdev->driver_type != RC_DRIVER_IR_RAW_TX) {
+		if (rcdev->rec_mode == LIRC_MODE_SCANCODE &&
+		    !kfifo_is_empty(&rcdev->scancodes))
+			events = POLLIN | POLLRDNORM;
+
+		if (rcdev->rec_mode == LIRC_MODE_MODE2 &&
+		    !kfifo_is_empty(&rcdev->rawir))
+			events = POLLIN | POLLRDNORM;
+	}
 
 	return events;
 }
 
-static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
-			    size_t length, loff_t *ppos)
+static ssize_t ir_lirc_read_mode2(struct file *file, char __user *buffer,
+				  size_t length)
 {
 	struct rc_dev *rcdev = file->private_data;
 	unsigned int copied;
 	int ret;
 
-	if (rcdev->driver_type == RC_DRIVER_IR_RAW_TX)
-		return -EINVAL;
-
 	if (length < sizeof(unsigned int) || length % sizeof(unsigned int))
 		return -EINVAL;
 
-	if (!rcdev->registered)
-		return -ENODEV;
-
 	do {
 		if (kfifo_is_empty(&rcdev->rawir)) {
 			if (file->f_flags & O_NONBLOCK)
@@ -532,6 +551,59 @@ static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
 	return copied;
 }
 
+static ssize_t ir_lirc_read_scancode(struct file *file, char __user *buffer,
+				     size_t length)
+{
+	struct rc_dev *rcdev = file->private_data;
+	unsigned int copied;
+	int ret;
+
+	if (length < sizeof(struct lirc_scancode) ||
+	    length % sizeof(struct lirc_scancode))
+		return -EINVAL;
+
+	do {
+		if (kfifo_is_empty(&rcdev->scancodes)) {
+			if (file->f_flags & O_NONBLOCK)
+				return -EAGAIN;
+
+			ret = wait_event_interruptible(rcdev->wait_poll,
+					!kfifo_is_empty(&rcdev->scancodes) ||
+					!rcdev->registered);
+			if (ret)
+				return ret;
+		}
+
+		if (!rcdev->registered)
+			return -ENODEV;
+
+		mutex_lock(&rcdev->lock);
+		ret = kfifo_to_user(&rcdev->scancodes, buffer, length, &copied);
+		mutex_unlock(&rcdev->lock);
+		if (ret)
+			return ret;
+	} while (copied == 0);
+
+	return copied;
+}
+
+static ssize_t ir_lirc_read(struct file *file, char __user *buffer,
+			    size_t length, loff_t *ppos)
+{
+	struct rc_dev *rcdev = file->private_data;
+
+	if (rcdev->driver_type == RC_DRIVER_IR_RAW_TX)
+		return -EINVAL;
+
+	if (!rcdev->registered)
+		return -ENODEV;
+
+	if (rcdev->rec_mode == LIRC_MODE_MODE2)
+		return ir_lirc_read_mode2(file, buffer, length);
+	else /* LIRC_MODE_SCANCODE */
+		return ir_lirc_read_scancode(file, buffer, length);
+}
+
 const struct file_operations lirc_fops = {
 	.owner		= THIS_MODULE,
 	.write		= ir_lirc_transmit_ir,
drivers/media/rc/ir-mce_kbd-decoder.c +5 -0
index 48eef43b0530..ba3e42d67893 100644
@@ -215,6 +215,7 @@ static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
 	struct mce_kbd_dec *data = &dev->raw->mce_kbd;
 	u32 scancode;
 	unsigned long delay;
+	struct lirc_scancode lsc = {};
 
 	if (!is_timing_event(ev)) {
 		if (ev.reset)
@@ -326,18 +327,22 @@ static int ir_mce_kbd_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			mod_timer(&data->rx_timeout, jiffies + delay);
 			/* Pass data to keyboard buffer parser */
 			ir_mce_kbd_process_keyboard_data(data->idev, scancode);
+			lsc.rc_proto = RC_PROTO_MCIR2_KBD;
 			break;
 		case MCIR2_MOUSE_NBITS:
 			scancode = data->body & 0x1fffff;
 			IR_dprintk(1, "mouse data 0x%06x\n", scancode);
 			/* Pass data to mouse buffer parser */
 			ir_mce_kbd_process_mouse_data(data->idev, scancode);
+			lsc.rc_proto = RC_PROTO_MCIR2_MSE;
 			break;
 		default:
 			IR_dprintk(1, "not keyboard or mouse data\n");
 			goto out;
 		}
 
+		lsc.scancode = scancode;
+		ir_lirc_scancode_event(dev, &lsc);
 		data->state = STATE_INACTIVE;
 		input_event(data->idev, EV_MSC, MSC_SCAN, scancode);
 		input_sync(data->idev);
drivers/media/rc/lirc_dev.c +13 -0
index 217c1203c87b..35d6072b12b2 100644
@@ -42,6 +42,8 @@ static void lirc_release_device(struct device *ld)
 
 	if (rcdev->driver_type == RC_DRIVER_IR_RAW)
 		kfifo_free(&rcdev->rawir);
+	if (rcdev->driver_type != RC_DRIVER_IR_RAW_TX)
+		kfifo_free(&rcdev->scancodes);
 
 	put_device(&rcdev->dev);
 }
@@ -59,11 +61,20 @@ int ir_lirc_register(struct rc_dev *dev)
 	else
 		dev->send_mode = LIRC_MODE_PULSE;
 
+	dev->rec_mode = LIRC_MODE_MODE2;
+
 	if (dev->driver_type == RC_DRIVER_IR_RAW) {
 		if (kfifo_alloc(&dev->rawir, MAX_IR_EVENT_SIZE, GFP_KERNEL))
 			return -ENOMEM;
 	}
 
+	if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
+		if (kfifo_alloc(&dev->scancodes, 32, GFP_KERNEL)) {
+			kfifo_free(&dev->rawir);
+			return -ENOMEM;
+		}
+	}
+
 	init_waitqueue_head(&dev->wait_poll);
 
 	minor = ida_simple_get(&lirc_ida, 0, RC_DEV_MAX, GFP_KERNEL);
@@ -94,6 +105,8 @@ int ir_lirc_register(struct rc_dev *dev)
 out_kfifo:
 	if (dev->driver_type == RC_DRIVER_IR_RAW)
 		kfifo_free(&dev->rawir);
+	if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
+		kfifo_free(&dev->scancodes);
 	return err;
 }
 
drivers/media/rc/rc-core-priv.h +3 -0
index a8ca6d7ff551..950de264666f 100644
@@ -286,6 +286,7 @@ void ir_raw_init(void);
 int lirc_dev_init(void);
 void lirc_dev_exit(void);
 void ir_lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev);
+void ir_lirc_scancode_event(struct rc_dev *dev, struct lirc_scancode *lsc);
 int ir_lirc_register(struct rc_dev *dev);
 void ir_lirc_unregister(struct rc_dev *dev);
 
@@ -295,6 +296,8 @@ static inline int lirc_dev_init(void) { return 0; }
 static inline void lirc_dev_exit(void) {}
 static inline void ir_lirc_raw_event(struct rc_dev *dev,
 				     struct ir_raw_event ev) { }
+static inline void ir_lirc_scancode_event(struct rc_dev *dev,
+					  struct lirc_scancode *lsc) { }
 static inline int ir_lirc_register(struct rc_dev *dev) { return 0; }
 static inline void ir_lirc_unregister(struct rc_dev *dev) { }
 #endif
drivers/media/rc/rc-main.c +7 -0
index e5027ac3c8fb..e9d6ce024cd2 100644
@@ -697,6 +697,13 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,
 			  dev->last_protocol != protocol ||
 			  dev->last_scancode != scancode ||
 			  dev->last_toggle   != toggle);
+	struct lirc_scancode sc = {
+		.scancode = scancode, .rc_proto = protocol,
+		.flags = toggle ? LIRC_SCANCODE_FLAG_TOGGLE : 0,
+		.keycode = keycode
+	};
+
+	ir_lirc_scancode_event(dev, &sc);
 
 	if (new_event && dev->keypressed)
 		ir_do_keyup(dev, false);
include/media/rc-core.h +5 -0
index e3db561a9bd7..82e5a8ffd5b9 100644
@@ -126,9 +126,12 @@ enum rc_filter_type {
  * @gap: true if we're in a gap
  * @send_timeout_reports: report timeouts in lirc raw IR.
  * @rawir: queue for incoming raw IR
+ * @scancodes: queue for incoming decoded scancodes
  * @wait_poll: poll struct for lirc device
  * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or
  *	LIRC_MODE_PULSE
+ * @rec_mode: lirc mode for receiving, either LIRC_MODE_SCANCODE or
+ *	LIRC_MODE_MODE2
  * @registered: set to true by rc_register_device(), false by
  *	rc_unregister_device
  * @change_protocol: allow changing the protocol used on hardware decoders
@@ -201,8 +204,10 @@ struct rc_dev {
 	bool				gap;
 	bool				send_timeout_reports;
 	DECLARE_KFIFO_PTR(rawir, unsigned int);
+	DECLARE_KFIFO_PTR(scancodes, struct lirc_scancode);
 	wait_queue_head_t		wait_poll;
 	u8				send_mode;
+	u8				rec_mode;
 #endif
 	bool				registered;
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
Signature · 1 line
2.13.6
author maintainer
#28 lore raw

PATCH v3 20/26 media: rc: ensure lirc device receives nec repeats

In reply to Sean Young

The lirc device should get lirc repeats whether there is a keymap match or not.

---
 drivers/media/rc/rc-main.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)
drivers/media/rc/rc-main.c +17 -10
index e9d6ce024cd2..dae427e25d71 100644
@@ -662,19 +662,25 @@ void rc_repeat(struct rc_dev *dev)
 {
 	unsigned long flags;
 	unsigned int timeout = protocols[dev->last_protocol].repeat_period;
+	struct lirc_scancode sc = {
+		.scancode = dev->last_scancode, .rc_proto = dev->last_protocol,
+		.keycode = dev->keypressed ? dev->last_keycode : KEY_RESERVED,
+		.flags = LIRC_SCANCODE_FLAG_REPEAT |
+			 (dev->last_toggle ? LIRC_SCANCODE_FLAG_TOGGLE : 0)
+	};
 
-	spin_lock_irqsave(&dev->keylock, flags);
+	ir_lirc_scancode_event(dev, &sc);
 
-	if (!dev->keypressed)
-		goto out;
+	spin_lock_irqsave(&dev->keylock, flags);
 
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
 	input_sync(dev->input_dev);
 
-	dev->keyup_jiffies = jiffies + msecs_to_jiffies(timeout);
-	mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
+	if (dev->keypressed) {
+		dev->keyup_jiffies = jiffies + msecs_to_jiffies(timeout);
+		mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
+	}
 
-out:
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
 EXPORT_SYMBOL_GPL(rc_repeat);
@@ -710,13 +716,14 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_proto protocol,
 
 	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
 
+	dev->last_protocol = protocol;
+	dev->last_scancode = scancode;
+	dev->last_toggle = toggle;
+	dev->last_keycode = keycode;
+
 	if (new_event && keycode != KEY_RESERVED) {
 		/* Register a keypress */
 		dev->keypressed = true;
-		dev->last_protocol = protocol;
-		dev->last_scancode = scancode;
-		dev->last_toggle = toggle;
-		dev->last_keycode = keycode;
 
 		IR_dprintk(1, "%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
 			   dev->device_name, keycode, protocol, scancode);
Signature · 1 line
2.13.6
author maintainer
#29 lore raw

PATCH v3 21/26 media: lirc: document LIRC_MODE_SCANCODE

In reply to Sean Young

Lirc supports a new mode which requires documentation.

---
 Documentation/media/lirc.h.rst.exceptions          | 26 +++++++++++
 Documentation/media/uapi/rc/lirc-dev-intro.rst     | 51 +++++++++++++++++++---
 Documentation/media/uapi/rc/lirc-get-features.rst  | 16 +++++++
 Documentation/media/uapi/rc/lirc-get-rec-mode.rst  |  3 +-
 Documentation/media/uapi/rc/lirc-get-send-mode.rst |  3 +-
 Documentation/media/uapi/rc/lirc-read.rst          | 15 +++++--
 Documentation/media/uapi/rc/lirc-write.rst         | 19 ++++++--
 7 files changed, 118 insertions(+), 15 deletions(-)
Documentation/media/lirc.h.rst.exceptions +26 -0
index 63ba1d341905..c6e3a35d2c4e 100644
@@ -32,6 +32,32 @@ ignore define LIRC_CAN_SET_REC_DUTY_CYCLE
 
 ignore ioctl LIRC_GET_LENGTH
 
+# rc protocols
+
+ignore symbol RC_PROTO_UNKNOWN
+ignore symbol RC_PROTO_OTHER
+ignore symbol RC_PROTO_RC5
+ignore symbol RC_PROTO_RC5X_20
+ignore symbol RC_PROTO_RC5_SZ
+ignore symbol RC_PROTO_JVC
+ignore symbol RC_PROTO_SONY12
+ignore symbol RC_PROTO_SONY15
+ignore symbol RC_PROTO_SONY20
+ignore symbol RC_PROTO_NEC
+ignore symbol RC_PROTO_NECX
+ignore symbol RC_PROTO_NEC32
+ignore symbol RC_PROTO_SANYO
+ignore symbol RC_PROTO_MCIR2_KBD
+ignore symbol RC_PROTO_MCIR2_MSE
+ignore symbol RC_PROTO_RC6_0
+ignore symbol RC_PROTO_RC6_6A_20
+ignore symbol RC_PROTO_RC6_6A_24
+ignore symbol RC_PROTO_RC6_6A_32
+ignore symbol RC_PROTO_RC6_MCE
+ignore symbol RC_PROTO_SHARP
+ignore symbol RC_PROTO_XMP
+ignore symbol RC_PROTO_CEC
+
 # Undocumented macros
 
 ignore define PULSE_BIT
Documentation/media/uapi/rc/lirc-dev-intro.rst +46 -5

63 lines not on this page · raw message

Documentation/media/uapi/rc/lirc-get-features.rst +16 -0
index 50c2c26d8e89..3ee44067de63 100644
@@ -64,6 +64,14 @@ LIRC features
 
     Unused. Kept just to avoid breaking uAPI.
 
+.. _LIRC-CAN-REC-SCANCODE:
+
+``LIRC_CAN_REC_SCANCODE``
+
+    The driver is capable of receiving using
+    :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>`.
+
+
 .. _LIRC-CAN-SET-SEND-CARRIER:
 
 ``LIRC_CAN_SET_SEND_CARRIER``
@@ -171,6 +179,14 @@ LIRC features
 
     Unused. Kept just to avoid breaking uAPI.
 
+.. _LIRC-CAN-SEND-SCANCODE:
+
+``LIRC_CAN_SEND_SCANCODE``
+
+    The driver supports sending (also called as IR blasting or IR TX) using
+    :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>`.
+
+
 Return Value
 ============
 
Documentation/media/uapi/rc/lirc-get-rec-mode.rst +2 -1
index b89de9add921..34919feaf392 100644
@@ -34,7 +34,8 @@ Description
 ===========
 
 Get/set supported receive modes. Only :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`
-is supported for IR receive.
+and :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported.
+Use :ref:`lirc_get_features` to find out which modes the driver supports.
 
 Return Value
 ============
Documentation/media/uapi/rc/lirc-get-send-mode.rst +2 -1
index e686b21689a0..e39383f08e21 100644
@@ -36,7 +36,8 @@ Description
 
 Get/set current transmit mode.
 
-Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` is supported by for IR send,
+Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and
+:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported by for IR send,
 depending on the driver. Use :ref:`lirc_get_features` to find out which
 modes the driver supports.
 
Documentation/media/uapi/rc/lirc-read.rst +11 -4
index ff14a69104e5..51d37ed10194 100644
@@ -45,13 +45,20 @@ descriptor ``fd`` into the buffer starting at ``buf``.  If ``count`` is zero,
 is greater than ``SSIZE_MAX``, the result is unspecified.
 
 The exact format of the data depends on what :ref:`lirc_modes` a driver
-uses. Use :ref:`lirc_get_features` to get the supported mode.
+uses. Use :ref:`lirc_get_features` to get the supported mode, and use
+:ref:`lirc_set_rec_mode` set the current active mode.
 
-The generally preferred mode for receive is
-:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`,
-in which packets containing an int value describing an IR signal are
+The mode :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` is for raw IR,
+in which packets containing an unsigned int value describing an IR signal are
 read from the chardev.
 
+Alternatively, :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` can be available,
+in this mode scancodes which are either decoded by software decoders, or
+by hardware decoders. The ``rc_proto`` member is set to the
+protocol used for transmission, and ``scancode`` to the decoded scancode,
+and the ``keycode`` set to the keycode or ``KEY_RESERVED``.
+
+
 Return Value
 ============
 
Documentation/media/uapi/rc/lirc-write.rst +15 -4
index 2aad0fef4a5b..3d7541bad8b9 100644
@@ -42,21 +42,32 @@ Description
 referenced by the file descriptor ``fd`` from the buffer starting at
 ``buf``.
 
-The exact format of the data depends on what mode a driver uses, use
-:ref:`lirc_get_features` to get the supported mode.
+The exact format of the data depends on what mode a driver is in, use
+:ref:`lirc_get_features` to get the supported modes and use
+:ref:`lirc_set_send_mode` set the mode.
 
 When in :ref:`LIRC_MODE_PULSE <lirc-mode-PULSE>` mode, the data written to
 the chardev is a pulse/space sequence of integer values. Pulses and spaces
 are only marked implicitly by their position. The data must start and end
 with a pulse, therefore, the data must always include an uneven number of
-samples. The write function must block until the data has been transmitted
+samples. The write function blocks until the data has been transmitted
 by the hardware. If more data is provided than the hardware can send, the
 driver returns ``EINVAL``.
 
+When in :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` mode, one
+``struct lirc_scancode`` must be written to the chardev at a time, else
+``EINVAL`` is returned. Set the desired scancode in the ``scancode`` member,
+and the protocol in the ``rc_proto`` member. All other members must be set
+to 0, else ``EINVAL`` is returned. If there is no protocol encoder
+for the protocol or the scancode is not valid for the specified protocol,
+``EINVAL`` is returned. The write function may not wait until the scancode
+is transmitted.
+
+
 Return Value
 ============
 
-On success, the number of bytes read is returned. It is not an error if
+On success, the number of bytes written is returned. It is not an error if
 this number is smaller than the number of bytes requested, or the amount
 of data required for one frame.  On error, -1 is returned, and the ``errno``
 variable is set appropriately. The generic error codes are described at the
Signature · 1 line
2.13.6
author maintainer
#30 lore raw

PATCH v3 22/26 media: lirc: introduce LIRC_SET_POLL_MODES

In reply to Sean Young

If you want to poll for both decoded scancodes and raw IR, then this ioctl will help you.

int fd = open("/dev/lirc0", O_RDONLY | O_NONBLOCK);

for (;;) {
	unsigned mode = LIRC_MODE_SCANCODE | LIRC_MODE_MODE2;
	ioctl(fd, LIRC_SET_POLL_MODES, &mode);
	poll(&((struct pollfd){ .fd = fd, .events = POLLIN }), 1, -1);
	mode = LIRC_MODE_SCANCODE;
	ioctl(fd, LIRC_SET_REC_MODE, &mode);
	struct lirc_scancode sc;
	if (read(fd, &sc, sizeof(sc)) == sizeof(sc)) {
		printf("scancode protocol:%d scancode:%llx\n",
			sc.rc_proto, sc.scancode);
	}
	mode = LIRC_MODE_MODE2;
	ioctl(fd, LIRC_SET_REC_MODE, &mode);
	unsigned sample;
	if (read(fd, &sample, sizeof(sample)) == sizeof(sample)) {
		if (LIRC_IS_SPACE(sample))
			printf("space %u\n", LIRC_VAL(sample)));
		if (LIRC_IS_PULSE(sample))
			printf("pulse %u\n", LIRC_VAL(sample)));
	}
}

Note that LIRC_SET_REC_MODE will also affect the poll mode, so you must set it again before calling poll.

---
 Documentation/media/uapi/rc/lirc-func.rst          |  1 +
 .../media/uapi/rc/lirc-set-poll-modes.rst          | 52 ++++++++++++++++++++++
 drivers/media/rc/ir-lirc-codec.c                   | 19 ++++++--
 drivers/media/rc/lirc_dev.c                        |  1 +
 include/media/rc-core.h                            |  3 ++
 include/uapi/linux/lirc.h                          |  9 ++++
 6 files changed, 81 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/media/uapi/rc/lirc-set-poll-modes.rst
Documentation/media/uapi/rc/lirc-func.rst +1 -0
index ddb4620de294..6493430aabef 100644
@@ -25,3 +25,4 @@ LIRC Function Reference
     lirc-set-rec-timeout-reports
     lirc-set-measure-carrier-mode
     lirc-set-wideband-receiver
+    lirc-set-poll-modes
Documentation/media/uapi/rc/lirc-set-poll-modes.rst new file +52 -0

52 lines not on this page · raw message

drivers/media/rc/ir-lirc-codec.c +15 -4
index 92674bca8225..559a4049151e 100644
@@ -359,6 +359,17 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 			return -EINVAL;
 
 		dev->rec_mode = val;
+		dev->poll_mode = val;
+		return 0;
+
+	case LIRC_SET_POLL_MODES:
+		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
+			return -ENOTTY;
+
+		if (val & ~(LIRC_MODE_MODE2 | LIRC_MODE_SCANCODE))
+			return -EINVAL;
+
+		dev->poll_mode = val;
 		return 0;
 
 	case LIRC_GET_SEND_MODE:
@@ -504,13 +515,13 @@ static unsigned int ir_lirc_poll(struct file *file,
 	if (!rcdev->registered) {
 		events = POLLHUP | POLLERR;
 	} else if (rcdev->driver_type != RC_DRIVER_IR_RAW_TX) {
-		if (rcdev->rec_mode == LIRC_MODE_SCANCODE &&
+		if ((rcdev->poll_mode & LIRC_MODE_SCANCODE) &&
 		    !kfifo_is_empty(&rcdev->scancodes))
-			events = POLLIN | POLLRDNORM;
+			events |= POLLIN | POLLRDNORM;
 
-		if (rcdev->rec_mode == LIRC_MODE_MODE2 &&
+		if ((rcdev->poll_mode & LIRC_MODE_MODE2) &&
 		    !kfifo_is_empty(&rcdev->rawir))
-			events = POLLIN | POLLRDNORM;
+			events |= POLLIN | POLLRDNORM;
 	}
 
 	return events;
drivers/media/rc/lirc_dev.c +1 -0
index 35d6072b12b2..aee7cbb04439 100644
@@ -62,6 +62,7 @@ int ir_lirc_register(struct rc_dev *dev)
 		dev->send_mode = LIRC_MODE_PULSE;
 
 	dev->rec_mode = LIRC_MODE_MODE2;
+	dev->poll_mode = LIRC_MODE_MODE2;
 
 	if (dev->driver_type == RC_DRIVER_IR_RAW) {
 		if (kfifo_alloc(&dev->rawir, MAX_IR_EVENT_SIZE, GFP_KERNEL))
include/media/rc-core.h +3 -0
index 82e5a8ffd5b9..3c9126e401c5 100644
@@ -132,6 +132,8 @@ enum rc_filter_type {
  *	LIRC_MODE_PULSE
  * @rec_mode: lirc mode for receiving, either LIRC_MODE_SCANCODE or
  *	LIRC_MODE_MODE2
+ * @poll_mode: lirc mode used for polling, can poll for both LIRC_MODE_SCANCODE
+ *	and LIRC_MODE_MODE2
  * @registered: set to true by rc_register_device(), false by
  *	rc_unregister_device
  * @change_protocol: allow changing the protocol used on hardware decoders
@@ -208,6 +210,7 @@ struct rc_dev {
 	wait_queue_head_t		wait_poll;
 	u8				send_mode;
 	u8				rec_mode;
+	u8				poll_mode;
 #endif
 	bool				registered;
 	int				(*change_protocol)(struct rc_dev *dev, u64 *rc_proto);
include/uapi/linux/lirc.h +9 -0
index fed779546017..5297e96d5469 100644
@@ -134,6 +134,15 @@
 #define LIRC_SET_WIDEBAND_RECEIVER     _IOW('i', 0x00000023, __u32)
 
 /*
+ * For raw IR devices, both raw IR (LIRC_MODE_MODE2) and decodes scancodes
+ * (LIRC_MODE_SCANCODE) can be read. By default, poll will show read
+ * ready for the last mode set by LIRC_SET_REC_MODE. Use LIRC_SET_POLL_MODE
+ * LIRC_MODE_SCANCODE | LIRC_MODE_MODE2 to show read ready for both
+ * modes.
+ */
+#define LIRC_SET_POLL_MODES	       _IOW('i', 0x00000024, __u32)
+
+/*
  * struct lirc_scancode - decoded scancode with protocol for use with
  *	LIRC_MODE_SCANCODE
  *
Signature · 1 line
2.13.6
author maintainer
#31 lore raw

PATCH v3 23/26 media: lirc: scancode rc devices should have a lirc device too

In reply to Sean Young

Now that the lirc interface supports scancodes, RC scancode devices can also have a lirc device. The only feature they will have enabled is LIRC_CAN_REC_SCANCODE.

Note that CEC devices have no lirc device, since they can be controlled from their /dev/cecN chardev.

---
 drivers/media/rc/ir-lirc-codec.c | 34 ++++++++++++++++++++++++++--------
 drivers/media/rc/lirc_dev.c      |  9 +++++++--
 drivers/media/rc/rc-main.c       |  6 +++---
 3 files changed, 36 insertions(+), 13 deletions(-)
drivers/media/rc/ir-lirc-codec.c +26 -8
index 559a4049151e..6f1d9dd766d5 100644
@@ -309,6 +309,9 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 
 	switch (cmd) {
 	case LIRC_GET_FEATURES:
+		if (dev->driver_type == RC_DRIVER_SCANCODE)
+			val |= LIRC_CAN_REC_SCANCODE;
+
 		if (dev->driver_type == RC_DRIVER_IR_RAW) {
 			val |= LIRC_CAN_REC_MODE2 | LIRC_CAN_REC_SCANCODE;
 			if (dev->rx_resolution)
@@ -352,22 +355,37 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 		break;
 
 	case LIRC_SET_REC_MODE:
-		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
+		switch (dev->driver_type) {
+		case RC_DRIVER_IR_RAW_TX:
 			return -ENOTTY;
-
-		if (!(val == LIRC_MODE_MODE2 || val == LIRC_MODE_SCANCODE))
-			return -EINVAL;
+		case RC_DRIVER_SCANCODE:
+			if (val != LIRC_MODE_SCANCODE)
+				return -EINVAL;
+			break;
+		case RC_DRIVER_IR_RAW:
+			if (!(val == LIRC_MODE_MODE2 ||
+			      val == LIRC_MODE_SCANCODE))
+				return -EINVAL;
+			break;
+		}
 
 		dev->rec_mode = val;
 		dev->poll_mode = val;
 		return 0;
 
 	case LIRC_SET_POLL_MODES:
-		if (dev->driver_type == RC_DRIVER_IR_RAW_TX)
+		switch (dev->driver_type) {
+		case RC_DRIVER_IR_RAW_TX:
 			return -ENOTTY;
-
-		if (val & ~(LIRC_MODE_MODE2 | LIRC_MODE_SCANCODE))
-			return -EINVAL;
+		case RC_DRIVER_SCANCODE:
+			if (val != LIRC_MODE_SCANCODE)
+				return -EINVAL;
+			break;
+		case RC_DRIVER_IR_RAW:
+			if (val & ~(LIRC_MODE_MODE2 | LIRC_MODE_SCANCODE))
+				return -EINVAL;
+			break;
+		}
 
 		dev->poll_mode = val;
 		return 0;
drivers/media/rc/lirc_dev.c +7 -2
index aee7cbb04439..6fc1ec257153 100644
@@ -61,8 +61,13 @@ int ir_lirc_register(struct rc_dev *dev)
 	else
 		dev->send_mode = LIRC_MODE_PULSE;
 
-	dev->rec_mode = LIRC_MODE_MODE2;
-	dev->poll_mode = LIRC_MODE_MODE2;
+	if (dev->driver_type == RC_DRIVER_SCANCODE) {
+		dev->rec_mode = LIRC_MODE_SCANCODE;
+		dev->poll_mode = LIRC_MODE_SCANCODE;
+	} else {
+		dev->rec_mode = LIRC_MODE_MODE2;
+		dev->poll_mode = LIRC_MODE_MODE2;
+	}
 
 	if (dev->driver_type == RC_DRIVER_IR_RAW) {
 		if (kfifo_alloc(&dev->rawir, MAX_IR_EVENT_SIZE, GFP_KERNEL))
drivers/media/rc/rc-main.c +3 -3
index dae427e25d71..9f39bc074837 100644
@@ -1810,7 +1810,7 @@ int rc_register_device(struct rc_dev *dev)
 	}
 
 	/* Ensure that the lirc kfifo is setup before we start the thread */
-	if (dev->driver_type != RC_DRIVER_SCANCODE) {
+	if (dev->allowed_protocols != RC_PROTO_BIT_CEC) {
 		rc = ir_lirc_register(dev);
 		if (rc < 0)
 			goto out_rx;
@@ -1831,7 +1831,7 @@ int rc_register_device(struct rc_dev *dev)
 	return 0;
 
 out_lirc:
-	if (dev->driver_type != RC_DRIVER_SCANCODE)
+	if (dev->allowed_protocols != RC_PROTO_BIT_CEC)
 		ir_lirc_unregister(dev);
 out_rx:
 	rc_free_rx_device(dev);
@@ -1892,7 +1892,7 @@ void rc_unregister_device(struct rc_dev *dev)
 	 * lirc device should be freed with dev->registered = false, so
 	 * that userspace polling will get notified.
 	 */
-	if (dev->driver_type != RC_DRIVER_SCANCODE)
+	if (dev->allowed_protocols != RC_PROTO_BIT_CEC)
 		ir_lirc_unregister(dev);
 
 	device_del(&dev->dev);
Signature · 1 line
2.13.6
author maintainer
#32 lore raw

PATCH v3 24/26 media: MAINTAINERS: remove lirc staging area

In reply to Sean Young

Now that lirc is no longer in the staging area, remove the entry.

---
 MAINTAINERS | 6 ------
 1 file changed, 6 deletions(-)
MAINTAINERS +0 -6
index a8126830829b..fb5f548a568e 100644
@@ -12677,12 +12677,6 @@ S:	Odd Fixes
 F:	Documentation/devicetree/bindings/staging/iio/
 F:	drivers/staging/iio/
 
-STAGING - LIRC (LINUX INFRARED REMOTE CONTROL) DRIVERS
-M:	Jarod Wilson <[email protected]>
-W:	http://www.lirc.org/
-S:	Odd Fixes
-F:	drivers/staging/media/lirc/
-
 STAGING - LUSTRE PARALLEL FILESYSTEM
 M:	Oleg Drokin <[email protected]>
 M:	Andreas Dilger <[email protected]>
Signature · 1 line
2.13.6
author maintainer
#33 lore raw

PATCH v3 25/26 media: MAINTAINERS: add entry for zilog_ir

In reply to Sean Young

Add MAINTAINER's entry for this new driver ported from staging.

---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)
MAINTAINERS +6 -0
index fb5f548a568e..15d32348e902 100644
@@ -14876,6 +14876,12 @@ Q:	https://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/zd1301_demod*
 
+ZILOG/HAUPPAUGE IR TRANSMITTER
+M:	Sean Young <[email protected]>
+L:	[email protected]
+S:	Maintained
+F:	drivers/media/rc/zilog_ir.c
+
 ZPOOL COMPRESSED PAGE STORAGE API
 M:	Dan Streetman <[email protected]>
 L:	[email protected]
Signature · 1 line
2.13.6
author maintainer
#34 lore raw

PATCH v3 26/26 kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit

In reply to Sean Young

If you try to store u64 in a kfifo (or a struct with u64 members), then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes padding due to alignment (note that struct __kfifo is 20 bytes on 32 bit).

That in turn causes the __is_kfifo_ptr() to fail, which is caught by kfifo_alloc(), which now returns EINVAL.

So, ensure that __is_kfifo_ptr() compares to the right structure.

---
 include/linux/kfifo.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/kfifo.h +2 -1
index 41eb6fdf87a8..86b5fb08e96c 100644
@@ -113,7 +113,8 @@ struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
  * array is a part of the structure and the fifo type where the array is
  * outside of the fifo structure.
  */
-#define	__is_kfifo_ptr(fifo)	(sizeof(*fifo) == sizeof(struct __kfifo))
+#define	__is_kfifo_ptr(fifo) \
+	(sizeof(*fifo) == sizeof(STRUCT_KFIFO_PTR(typeof(*(fifo)->type))))
 
 /**
  * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object
Signature · 1 line
2.13.6
author maintainer
#35 lore raw

PATCH v3 26/26 kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit

In reply to Sean Young

If you try to store u64 in a kfifo (or a struct with u64 members), then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes padding due to alignment (note that struct __kfifo is 20 bytes on 32 bit).

That in turn causes the __is_kfifo_ptr() to fail, which is caught by kfifo_alloc(), which now returns EINVAL.

So, ensure that __is_kfifo_ptr() compares to the right structure.

---
 include/linux/kfifo.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/kfifo.h +2 -1
index 41eb6fdf87a8..86b5fb08e96c 100644
@@ -113,7 +113,8 @@ struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
  * array is a part of the structure and the fifo type where the array is
  * outside of the fifo structure.
  */
-#define	__is_kfifo_ptr(fifo)	(sizeof(*fifo) == sizeof(struct __kfifo))
+#define	__is_kfifo_ptr(fifo) \
+	(sizeof(*fifo) == sizeof(STRUCT_KFIFO_PTR(typeof(*(fifo)->type))))
 
 /**
  * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object
#5 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

In reply to Sean Young
Quoted 1 line · Sean Young

The ir-kbd-i2c module already handles this very well.

Hi Sean:

It's been years, but my recollection is that although ir-kdb-i2c might handle receive well, but since the 4 i2c addresses (1 Rx, 1 Tx, 1 IR Tx code learning, 1 custom Tx code) are all handled by the same Zilog microcontroller internally, that splitting the Rx and Tx functionality between two modules became problematic.

Believe me, if i could have leveraged ir-kdb-i2c back when I ported this, I would have. I think it's a very bad idea to remove the receiver from lirc_zilog.

The cx18 and ivtv drivers both use lirc_zilog IIRC. Have you looked at the changes required to have the first I2C address used by one i2c module, and the next one (or three) I2C addresses used by another i2c module?

-Andy

Quoted 1,381 lines
---
 drivers/staging/media/lirc/lirc_zilog.c | 901 +++-------------------
----------
 1 file changed, 76 insertions(+), 825 deletions(-)
drivers/staging/media/lirc/lirc_zilog.c +0 -77
index 6bd0717bf76e..757b3fc247ac 100644
@@ -64,28 +64,7 @@
 /* Max transfer size done by I2C transfer functions */
 #define MAX_XFER_SIZE  64
 
-struct IR;
-
-struct IR_rx {
-	struct kref ref;
-	struct IR *ir;
-
-	/* RX device */
-	struct mutex client_lock;
-	struct i2c_client *c;
-
-	/* RX polling thread data */
-	struct task_struct *task;
-
-	/* RX read data */
-	unsigned char b[3];
-	bool hdpvr_data_fmt;
-};
-
 struct IR_tx {
-	struct kref ref;
-	struct IR *ir;
-
 	/* TX device */
 	struct mutex client_lock;
 	struct i2c_client *c;
@@ -93,39 +72,9 @@ struct IR_tx {
 	/* TX additional actions needed */
 	int need_boot;
 	bool post_tx_ready_poll;
-};
-
-struct IR {
-	struct kref ref;
-	struct list_head list;
-
-	/* FIXME spinlock access to l->features */
 	struct lirc_dev *l;
-	struct lirc_buffer rbuf;
-
-	struct mutex ir_lock;
-	atomic_t open_count;
-
-	struct device *dev;
-	struct i2c_adapter *adapter;
-
-	spinlock_t rx_ref_lock; /* struct IR_rx kref get()/put() */
-	struct IR_rx *rx;
-
-	spinlock_t tx_ref_lock; /* struct IR_tx kref get()/put() */
-	struct IR_tx *tx;
 };
 
-/* IR transceiver instance object list */
-/*
- * This lock is used for the following:
- * a. ir_devices_list access, insertions, deletions
- * b. struct IR kref get()s and put()s
- * c. serialization of ir_probe() for the two i2c_clients for a Z8
- */
-static DEFINE_MUTEX(ir_devices_lock);
-static LIST_HEAD(ir_devices_list);
-
 /* Block size for IR transmitter */
 #define TX_BLOCK_SIZE	99
 
@@ -153,348 +102,8 @@ struct tx_data_struct {
 static struct tx_data_struct *tx_data;
 static struct mutex tx_data_lock;
 
-
 /* module parameters */
 static bool debug;	/* debug output */
-static bool tx_only;	/* only handle the IR Tx function */
-
-
-/* struct IR reference counting */
-static struct IR *get_ir_device(struct IR *ir, bool
 ir_devices_lock_held)
-{
-	if (ir_devices_lock_held) {
-		kref_get(&ir->ref);
-	} else {
-		mutex_lock(&ir_devices_lock);
-		kref_get(&ir->ref);
-		mutex_unlock(&ir_devices_lock);
-	}
-	return ir;
-}
-
-static void release_ir_device(struct kref *ref)
-{
-	struct IR *ir = container_of(ref, struct IR, ref);
-
-	/*
-	 * Things should be in this state by now:
-	 * ir->rx set to NULL and deallocated - happens before ir-
 >rx->ir put()
-	 * ir->rx->task kthread stopped - happens before ir->rx->ir
 put()
-	 * ir->tx set to NULL and deallocated - happens before ir-
Quoted 1 line

tx->ir put()

drivers/staging/media/lirc/lirc_zilog.c +0 -40
-	 * ir->open_count ==  0 - happens on final close()
-	 * ir_lock, tx_ref_lock, rx_ref_lock, all released
-	 */
-	if (ir->l)
-		lirc_unregister_device(ir->l);
-
-	if (kfifo_initialized(&ir->rbuf.fifo))
-		lirc_buffer_free(&ir->rbuf);
-	list_del(&ir->list);
-	kfree(ir);
-}
-
-static int put_ir_device(struct IR *ir, bool ir_devices_lock_held)
-{
-	int released;
-
-	if (ir_devices_lock_held)
-		return kref_put(&ir->ref, release_ir_device);
-
-	mutex_lock(&ir_devices_lock);
-	released = kref_put(&ir->ref, release_ir_device);
-	mutex_unlock(&ir_devices_lock);
-
-	return released;
-}
-
-/* struct IR_rx reference counting */
-static struct IR_rx *get_ir_rx(struct IR *ir)
-{
-	struct IR_rx *rx;
-
-	spin_lock(&ir->rx_ref_lock);
-	rx = ir->rx;
-	if (rx)
-		kref_get(&rx->ref);
-	spin_unlock(&ir->rx_ref_lock);
-	return rx;
-}
-
-static void destroy_rx_kthread(struct IR_rx *rx, bool

ir_devices_lock_held)

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-{
-	/* end up polling thread */
-	if (!IS_ERR_OR_NULL(rx->task)) {
-		kthread_stop(rx->task);
-		rx->task = NULL;
-		/* Put the ir ptr that ir_probe() gave to the rx

poll thread */

drivers/staging/media/lirc/lirc_zilog.c +0 -12
-		put_ir_device(rx->ir, ir_devices_lock_held);
-	}
-}
-
-static void release_ir_rx(struct kref *ref)
-{
-	struct IR_rx *rx = container_of(ref, struct IR_rx, ref);
-	struct IR *ir = rx->ir;
-
-	/*
-	 * This release function can't do all the work, as we want
-	 * to keep the rx_ref_lock a spinlock, and killing the poll

thread

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-	 * and releasing the ir reference can cause a sleep.  That

work is

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-	 * performed by put_ir_rx()
-	 */
-	ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-	/* Don't put_ir_device(rx->ir) here; lock can't be freed yet

*/

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-	ir->rx = NULL;
-	/* Don't do the kfree(rx) here; we still need to kill the

poll thread */

drivers/staging/media/lirc/lirc_zilog.c +0 -15
-}
-
-static int put_ir_rx(struct IR_rx *rx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = rx->ir;
-
-	spin_lock(&ir->rx_ref_lock);
-	released = kref_put(&rx->ref, release_ir_rx);
-	spin_unlock(&ir->rx_ref_lock);
-	/* Destroy the rx kthread while not holding the spinlock */
-	if (released) {
-		destroy_rx_kthread(rx, ir_devices_lock_held);
-		kfree(rx);
-		/* Make sure we're not still in a poll_table

somewhere */

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		wake_up_interruptible(&ir->rbuf.wait_poll);
-	}
-	/* Do a reference put() for the rx->ir reference, if we

released rx */

drivers/staging/media/lirc/lirc_zilog.c +0 -25
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-/* struct IR_tx reference counting */
-static struct IR_tx *get_ir_tx(struct IR *ir)
-{
-	struct IR_tx *tx;
-
-	spin_lock(&ir->tx_ref_lock);
-	tx = ir->tx;
-	if (tx)
-		kref_get(&tx->ref);
-	spin_unlock(&ir->tx_ref_lock);
-	return tx;
-}
-
-static void release_ir_tx(struct kref *ref)
-{
-	struct IR_tx *tx = container_of(ref, struct IR_tx, ref);
-	struct IR *ir = tx->ir;
-
-	ir->l->features &= ~LIRC_CAN_SEND_LIRCCODE;
-	/* Don't put_ir_device(tx->ir) here, so our lock doesn't get

freed */

drivers/staging/media/lirc/lirc_zilog.c +0 -13
-	ir->tx = NULL;
-	kfree(tx);
-}
-
-static int put_ir_tx(struct IR_tx *tx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = tx->ir;
-
-	spin_lock(&ir->tx_ref_lock);
-	released = kref_put(&tx->ref, release_ir_tx);
-	spin_unlock(&ir->tx_ref_lock);
-	/* Do a reference put() for the tx->ir reference, if we

released tx */

drivers/staging/media/lirc/lirc_zilog.c +0 -28
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-static int add_to_buf(struct IR *ir)
-{
-	__u16 code;
-	unsigned char codes[2];
-	unsigned char keybuf[6];
-	int got_data = 0;
-	int ret;
-	int failures = 0;
-	unsigned char sendbuf[1] = { 0 };
-	struct lirc_buffer *rbuf = ir->l->buf;
-	struct IR_rx *rx;
-	struct IR_tx *tx;
-
-	if (lirc_buffer_full(rbuf)) {
-		dev_dbg(ir->dev, "buffer overflow\n");
-		return -EOVERFLOW;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/* Ensure our rx->c i2c_client remains valid for the

duration */

drivers/staging/media/lirc/lirc_zilog.c +0 -21
-	mutex_lock(&rx->client_lock);
-	if (!rx->c) {
-		mutex_unlock(&rx->client_lock);
-		put_ir_rx(rx, false);
-		return -ENXIO;
-	}
-
-	tx = get_ir_tx(ir);
-
-	/*
-	 * service the device as long as it is returning
-	 * data and we have space
-	 */
-	do {
-		if (kthread_should_stop()) {
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Lock i2c bus for the duration.  RX/TX chips

interfere so

drivers/staging/media/lirc/lirc_zilog.c +0 -12
-		 * this is worth it
-		 */
-		mutex_lock(&ir->ir_lock);
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Send random "poll command" (?)  Windows driver

does this

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-		 * and it is a good point to detect chip failure.
-		 */
-		ret = i2c_master_send(rx->c, sendbuf, 1);
-		if (ret != 1) {
-			dev_err(ir->dev, "i2c_master_send failed

with %d\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				ret);
-			if (failures >= 3) {
-				mutex_unlock(&ir->ir_lock);
-				dev_err(ir->dev,
-					"unable to read from the IR

chip after 3 resets, giving up\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-				break;
-			}
-
-			/* Looks like the chip crashed, reset it */
-			dev_err(ir->dev,
-				"polling the IR receiver chip

failed, trying reset\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -23
-
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			if (kthread_should_stop()) {
-				mutex_unlock(&ir->ir_lock);
-				ret = -ENODATA;
-				break;
-			}
-			schedule_timeout((100 * HZ + 999) / 1000);
-			if (tx)
-				tx->need_boot = 1;
-
-			++failures;
-			mutex_unlock(&ir->ir_lock);
-			ret = 0;
-			continue;
-		}
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-		ret = i2c_master_recv(rx->c, keybuf,

sizeof(keybuf));

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-		mutex_unlock(&ir->ir_lock);
-		if (ret != sizeof(keybuf)) {
-			dev_err(ir->dev,
-				"i2c_master_recv failed with %d --

keeping last read buffer\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -16
-				ret);
-		} else {
-			rx->b[0] = keybuf[3];
-			rx->b[1] = keybuf[4];
-			rx->b[2] = keybuf[5];
-			dev_dbg(ir->dev,
-				"key (0x%02x/0x%02x)\n",
-				rx->b[0], rx->b[1]);
-		}
-
-		/* key pressed ? */
-		if (rx->hdpvr_data_fmt) {
-			if (got_data && (keybuf[0] == 0x80)) {
-				ret = 0;
-				break;
-			} else if (got_data && (keybuf[0] == 0x00))

{

drivers/staging/media/lirc/lirc_zilog.c +0 -10
-				ret = -ENODATA;
-				break;
-			}
-		} else if ((rx->b[0] & 0x80) == 0) {
-			ret = got_data ? 0 : -ENODATA;
-			break;
-		}
-
-		/* look what we have */
-		code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1]
Quoted 1 line
Quoted 1 line

2);

drivers/staging/media/lirc/lirc_zilog.c +0 -20
-
-		codes[0] = (code >> 8) & 0xff;
-		codes[1] = code & 0xff;
-
-		/* return it */
-		lirc_buffer_write(rbuf, codes);
-		++got_data;
-		ret = 0;
-	} while (!lirc_buffer_full(rbuf));
-
-	mutex_unlock(&rx->client_lock);
-	if (tx)
-		put_ir_tx(tx, false);
-	put_ir_rx(rx, false);
-	return ret;
-}
-
-/*
- * Main function of the polling thread -- from lirc_dev.
- * We don't fit the LIRC model at all anymore.  This is horrible,

but
- * basically we have a single RX/TX device with a nasty failure mode
- * that needs to be accounted for across the pair. lirc lets us provide
- * fops, but prevents us from using the internal polling, etc. if we do
- * so. Hence the replication. Might be neater to extend the LIRC model
- * to account for this but I'd think it's a very special case of seriously
- * messed up hardware.
- */

drivers/staging/media/lirc/lirc_zilog.c +0 -11
-static int lirc_thread(void *arg)
-{
-	struct IR *ir = arg;
-	struct lirc_buffer *rbuf = ir->l->buf;
-
-	dev_dbg(ir->dev, "poll thread started\n");
-
-	while (!kthread_should_stop()) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		/* if device not opened, we can sleep half a second

*/

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-		if (atomic_read(&ir->open_count) == 0) {
-			schedule_timeout(HZ / 2);
-			continue;
-		}
-
-		/*
-		 * This is ~113*2 + 24 + jitter (2*repeat gap + code

length).

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * We use this interval as the chip resets every

time you poll

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * it (bad!).  This is therefore just sufficient to

catch all

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * of the button presses.  It makes the remote much

more

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * responsive.  You can see the difference by

running irw and

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * holding down a button.  With 100ms, the old

polling

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * interval, you'll notice breaks in the repeat

sequence

drivers/staging/media/lirc/lirc_zilog.c +2 -14
-		 * corresponding to lost keypresses.
-		 */
-		schedule_timeout((260 * HZ) / 1000);
-		if (kthread_should_stop())
-			break;
-		if (!add_to_buf(ir))
-			wake_up_interruptible(&rbuf->wait_poll);
-	}
-
-	dev_dbg(ir->dev, "poll thread ended\n");
-	return 0;
-}
 
 /* safe read of a uint32 (always network byte order) */
 static int read_uint32(unsigned char **data,
@@ -645,10 +254,10 @@ static int send_data_block(struct IR_tx *tx,
 unsigned char *data_block)
 		buf[0] = (unsigned char)(i + 1);
 		for (j = 0; j < tosend; ++j)
 			buf[1 + j] = data_block[i + j];
-		dev_dbg(tx->ir->dev, "%*ph", 5, buf);
+		dev_dbg(&tx->l->dev, "%*ph", 5, buf);
 		ret = i2c_master_send(tx->c, buf, tosend + 1);
 		if (ret != tosend + 1) {
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"i2c_master_send failed with %d\n",
 ret);
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			return ret < 0 ? ret : -EFAULT;
 		}
@@ -673,7 +282,7 @@ static int send_boot_data(struct IR_tx *tx)
 	buf[1] = 0x20;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
drivers/staging/media/lirc/lirc_zilog.c +3 -3
 	}
@@ -690,22 +299,22 @@ static int send_boot_data(struct IR_tx *tx)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Here comes the firmware version... (hopefully) */
 	ret = i2c_master_recv(tx->c, buf, 4);
 	if (ret != 4) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return 0;
 	}
 	if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
-		dev_err(tx->ir->dev, "unexpected IR TX init
 response: %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX init
 response: %02x\n",
 			buf[0]);
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 		return 0;
 	}
-	dev_notice(tx->ir->dev,
+	dev_notice(&tx->l->dev,
 		   "Zilog/Hauppauge IR blaster firmware version

%d.%d.%d loaded\n",

drivers/staging/media/lirc/lirc_zilog.c +2 -3
 		   buf[1], buf[2], buf[3]);
@@ -750,15 +359,15 @@ static int fw_load(struct IR_tx *tx)
 	}
 
 	/* Request codeset data file */
-	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", tx-
 >ir->dev);
+	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin",
 &tx->l->dev);
 	if (ret != 0) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"firmware haup-ir-blaster.bin not available
 (%d)\n",
 			ret);
 		ret = ret < 0 ? ret : -EFAULT;
 		goto out;
 	}
-	dev_dbg(tx->ir->dev, "firmware of size %zu loaded\n",

fw_entry->size);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+	dev_dbg(&tx->l->dev, "firmware of size %zu loaded\n",

fw_entry->size);

drivers/staging/media/lirc/lirc_zilog.c +1 -1
 	/* Parse the file */
 	tx_data = vmalloc(sizeof(*tx_data));
@@ -786,7 +395,7 @@ static int fw_load(struct IR_tx *tx)
 	if (!read_uint8(&data, tx_data->endp, &version))
 		goto corrupt;
 	if (version != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"unsupported code set file version (%u,
 expected 1) -- please upgrade to a newer driver\n",
 			version);
drivers/staging/media/lirc/lirc_zilog.c +2 -26
 		fw_unload_locked();
@@ -803,7 +412,7 @@ static int fw_load(struct IR_tx *tx)
 			 &tx_data->num_code_sets))
 		goto corrupt;
 
-	dev_dbg(tx->ir->dev, "%u IR blaster codesets loaded\n",
+	dev_dbg(&tx->l->dev, "%u IR blaster codesets loaded\n",
 		tx_data->num_code_sets);
 
 	tx_data->code_sets = vmalloc(
@@ -868,7 +477,7 @@ static int fw_load(struct IR_tx *tx)
 	goto out;
 
 corrupt:
-	dev_err(tx->ir->dev, "firmware is corrupt\n");
+	dev_err(&tx->l->dev, "firmware is corrupt\n");
 	fw_unload_locked();
 	ret = -EFAULT;
 
@@ -877,94 +486,6 @@ static int fw_load(struct IR_tx *tx)
 	return ret;
 }
 
-/* copied from lirc_dev */
-static ssize_t read(struct file *filep, char __user *outbuf, size_t
 n,
-		    loff_t *ppos)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	int ret = 0, written = 0, retries = 0;
-	unsigned int m;
-	DECLARE_WAITQUEUE(wait, current);
-
-	dev_dbg(ir->dev, "read called\n");
-	if (n % rbuf->chunk_size) {
-		dev_dbg(ir->dev, "read result = -EINVAL\n");
-		return -EINVAL;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/*
-	 * we add ourselves to the task queue before buffer check
-	 * to avoid losing scan code (in case when queue is awaken

somewhere

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-	 * between while condition checking and scheduling)
-	 */
-	add_wait_queue(&rbuf->wait_poll, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	/*
-	 * while we didn't provide 'length' bytes, device is opened

in blocking

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	 * mode and 'copy_to_user' is happy, wait for data.
-	 */
-	while (written < n && ret == 0) {
-		if (lirc_buffer_empty(rbuf)) {
-			/*
-			 * According to the read(2) man page,

'written' can be

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-			 * returned as less than 'n', instead of

blocking

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-			 * again, returning -EWOULDBLOCK, or

returning

drivers/staging/media/lirc/lirc_zilog.c +0 -20
-			 * -ERESTARTSYS
-			 */
-			if (written)
-				break;
-			if (filep->f_flags & O_NONBLOCK) {
-				ret = -EWOULDBLOCK;
-				break;
-			}
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-		} else {
-			unsigned char buf[MAX_XFER_SIZE];
-
-			if (rbuf->chunk_size > sizeof(buf)) {
-				dev_err(ir->dev,
-					"chunk_size is too big

(%d)!\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-					rbuf->chunk_size);
-				ret = -EINVAL;
-				break;
-			}
-			m = lirc_buffer_read(rbuf, buf);
-			if (m == rbuf->chunk_size) {
-				ret = copy_to_user(outbuf + written,

buf,

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-						   rbuf-
Quoted 1 line

chunk_size);

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-				written += rbuf->chunk_size;
-			} else {
-				retries++;
-			}
-			if (retries >= 5) {
-				dev_err(ir->dev, "Buffer read

failed!\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -15
-				ret = -EIO;
-			}
-		}
-	}
-
-	remove_wait_queue(&rbuf->wait_poll, &wait);
-	put_ir_rx(rx, false);
-	set_current_state(TASK_RUNNING);
-
-	dev_dbg(ir->dev, "read result = %d (%s)\n", ret,
-		ret ? "Error" : "OK");
-
-	return ret ? ret : written;
-}
-
 /* send a keypress to the IR TX device */
 static int send_code(struct IR_tx *tx, unsigned int code, unsigned

int key)
{

drivers/staging/media/lirc/lirc_zilog.c +1 -1
@@ -976,7 +497,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	ret = get_key_data(data_block, code, key);
 
 	if (ret == -EPROTO) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"failed to get data for code %u, key %u --
 check lircd.conf entries\n",
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			code, key);
 		return ret;
@@ -994,7 +515,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	buf[1] = 0x40;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		return ret < 0 ? ret : -EFAULT;
 	}
@@ -1007,18 +528,18 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Send finished download? */
 	ret = i2c_master_recv(tx->c, buf, 1);
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
drivers/staging/media/lirc/lirc_zilog.c +0 -1
 	if (buf[0] != 0xA0) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #1:

%02x\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+		dev_err(&tx->l->dev, "unexpected IR TX response #1:

%02x\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			buf[0]);
 		return -EFAULT;
 	}
@@ -1028,7 +549,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	buf[1] = 0x80;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
drivers/staging/media/lirc/lirc_zilog.c +0 -0
 		return ret < 0 ? ret : -EFAULT;
 	}
@@ -1038,7 +559,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	 * going to skip this whole mess and say we're done on the

HD PVR

drivers/staging/media/lirc/lirc_zilog.c +0 -1
 	 */
 	if (!tx->post_tx_ready_poll) {
-		dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code,

key);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+		dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code,

key);

drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		return 0;
 	}
@@ -1054,12 +575,12 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 		ret = i2c_master_send(tx->c, buf, 1);
 		if (ret == 1)
 			break;
-		dev_dbg(tx->ir->dev,
+		dev_dbg(&tx->l->dev,
 			"NAK expected: i2c_master_send failed with
 %d (try %d)\n",
 			ret, i + 1);
 	}
 	if (ret != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"IR TX chip never got ready: last

i2c_master_send failed with %d\n",

drivers/staging/media/lirc/lirc_zilog.c +2 -2
 			ret);
 		return ret < 0 ? ret : -EFAULT;
@@ -1068,17 +589,17 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 	/* Seems to be an 'ok' response */
 	i = i2c_master_recv(tx->c, buf, 1);
 	if (i != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return -EFAULT;
 	}
 	if (buf[0] != 0x80) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #2:
 %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX response #2:
 %02x\n",
 			buf[0]);
 		return -EFAULT;
 	}
 
drivers/staging/media/lirc/lirc_zilog.c +2 -3
 	/* Oh good, it worked */
-	dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code, key);
+	dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code, key);
 	return 0;
 }
@@ -1091,8 +612,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 static ssize_t write(struct file *filep, const char __user *buf,
 size_t n,
 		     loff_t *ppos)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_tx *tx;
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	size_t i;
drivers/staging/media/lirc/lirc_zilog.c +0 -5
 	int failures = 0;
@@ -1100,31 +620,20 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 	if (n % sizeof(int))
 		return -EINVAL;
 
-	/* Get a struct IR_tx reference */
-	tx = get_ir_tx(ir);
-	if (!tx)
-		return -ENXIO;
-
 	/* Ensure our tx->c i2c_client remains valid for the

duration */

drivers/staging/media/lirc/lirc_zilog.c +0 -4
 	mutex_lock(&tx->client_lock);
 	if (!tx->c) {
 		mutex_unlock(&tx->client_lock);
-		put_ir_tx(tx, false);
 		return -ENXIO;
 	}
 
-	/* Lock i2c bus for the duration */
-	mutex_lock(&ir->ir_lock);
-
 	/* Send each keypress */
 	for (i = 0; i < n;) {
 		int ret = 0;
 		int command;
 
 		if (copy_from_user(&command, buf + i,

sizeof(command))) {

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-			mutex_unlock(&ir->ir_lock);
 			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
 			return -EFAULT;
 		}
@@ -1133,9 +642,7 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 			/* Make sure we have the 'firmware' loaded,

first */

drivers/staging/media/lirc/lirc_zilog.c +0 -4
 			ret = fw_load(tx);
 			if (ret != 0) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
 				if (ret != -ENOMEM)
 					ret = -EIO;
 				return ret;
@@ -1151,9 +658,7 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 			ret = send_code(tx, (unsigned int)command >>
 16,
 					    (unsigned int)command &
 0xFFFF);
 			if (ret == -EPROTO) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
drivers/staging/media/lirc/lirc_zilog.c +2 -4
 				return ret;
 			}
 		}
@@ -1164,15 +669,13 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 		 */
 		if (ret != 0) {
 			/* Looks like the chip crashed, reset it */
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"sending to the IR transmitter chip
 failed, trying reset\n");
 
 			if (failures >= 3) {
-				dev_err(tx->ir->dev,
+				dev_err(&tx->l->dev,
 					"unable to send to the IR
 chip after 3 resets, giving up\n");
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
drivers/staging/media/lirc/lirc_zilog.c +0 -20
 				return ret;
 			}
 			set_current_state(TASK_UNINTERRUPTIBLE);
@@ -1184,60 +687,21 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 		}
 	}
 
-	/* Release i2c bus */
-	mutex_unlock(&ir->ir_lock);
-
 	mutex_unlock(&tx->client_lock);
 
-	/* Give back our struct IR_tx reference */
-	put_ir_tx(tx, false);
-
 	/* All looks good */
 	return n;
 }
 
-/* copied from lirc_dev */
-static unsigned int poll(struct file *filep, poll_table *wait)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	unsigned int ret;
-
-	dev_dbg(ir->dev, "%s called\n", __func__);
-
-	rx = get_ir_rx(ir);
-	if (!rx) {
-		/*
-		 * Revisit this, if our poll function ever reports

writeable

drivers/staging/media/lirc/lirc_zilog.c +0 -8
-		 * status for Tx
-		 */
-		dev_dbg(ir->dev, "%s result = POLLERR\n", __func__);
-		return POLLERR;
-	}
-
-	/*
-	 * Add our lirc_buffer's wait_queue to the poll_table. A

wake up on

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-	 * that buffer's wait queue indicates we may have a new poll

status.

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-	 */
-	poll_wait(filep, &rbuf->wait_poll, wait);
-
-	/* Indicate what ops could happen immediately without

blocking */

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	ret = lirc_buffer_empty(rbuf) ? 0 : (POLLIN | POLLRDNORM);
-
-	dev_dbg(ir->dev, "%s result = %s\n", __func__,
-		ret ? "POLLIN|POLLRDNORM" : "none");
-	return ret;
-}
 
 static long ioctl(struct file *filep, unsigned int cmd, unsigned

long arg)
{

drivers/staging/media/lirc/lirc_zilog.c +2 -8
-	struct IR *ir = lirc_get_pdata(filep);
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	unsigned long __user *uptr = (unsigned long __user *)arg;
 	int result;
 	unsigned long mode, features;
 
-	features = ir->l->features;
+	features = tx->l->features;
 
 	switch (cmd) {
 	case LIRC_GET_LENGTH:
@@ -1287,13 +751,7 @@ static long ioctl(struct file *filep, unsigned
 int cmd, unsigned long arg)
  */
 static int open(struct inode *node, struct file *filep)
 {
-	struct IR *ir;
-
 	lirc_init_pdata(node, filep);
-	ir = lirc_get_pdata(filep);
-
-	atomic_inc(&ir->open_count);
-
 	nonseekable_open(node, filep);
 	return 0;

}

drivers/staging/media/lirc/lirc_zilog.c +3 -12
@@ -1301,25 +759,16 @@ static int open(struct inode *node, struct
 file *filep)
 /* Close the IR device */
 static int close(struct inode *node, struct file *filep)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-
-	atomic_dec(&ir->open_count);
-
-	put_ir_device(ir, false);
 	return 0;
 }
 
-static int ir_remove(struct i2c_client *client);
 static int ir_probe(struct i2c_client *client, const struct
 i2c_device_id *id);
 
-#define ID_FLAG_TX	0x01
-#define ID_FLAG_HDPVR	0x02
+#define ID_FLAG_HDPVR	0x01
 
 static const struct i2c_device_id ir_transceiver_id[] = {
-	{ "ir_tx_z8f0811_haup",  ID_FLAG_TX                 },
-	{ "ir_rx_z8f0811_haup",  0                          },
-	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR | ID_FLAG_TX },
-	{ "ir_rx_z8f0811_hdpvr", ID_FLAG_HDPVR              },
+	{ "ir_tx_z8f0811_haup",  0 },
+	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR },
 	{ }

};
MODULE_DEVICE_TABLE(i2c, ir_transceiver_id);

drivers/staging/media/lirc/lirc_zilog.c +0 -47
@@ -1329,16 +778,13 @@ static struct i2c_driver driver = {
 		.name	= "Zilog/Hauppauge i2c IR",
 	},
 	.probe		= ir_probe,
-	.remove		= ir_remove,
 	.id_table	= ir_transceiver_id,
 };
 
 static const struct file_operations lirc_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.read		= read,
 	.write		= write,
-	.poll		= poll,
 	.unlocked_ioctl	= ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ioctl,
@@ -1347,55 +793,11 @@ static const struct file_operations lirc_fops
 = {
 	.release	= close
 };
 
-static int ir_remove(struct i2c_client *client)
-{
-	if (strncmp("ir_tx_z8", client->name, 8) == 0) {
-		struct IR_tx *tx = i2c_get_clientdata(client);
-
-		if (tx) {
-			mutex_lock(&tx->client_lock);
-			tx->c = NULL;
-			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
-		}
-	} else if (strncmp("ir_rx_z8", client->name, 8) == 0) {
-		struct IR_rx *rx = i2c_get_clientdata(client);
-
-		if (rx) {
-			mutex_lock(&rx->client_lock);
-			rx->c = NULL;
-			mutex_unlock(&rx->client_lock);
-			put_ir_rx(rx, false);
-		}
-	}
-	return 0;
-}
-
-/* ir_devices_lock must be held */
-static struct IR *get_ir_device_by_adapter(struct i2c_adapter
 *adapter)
-{
-	struct IR *ir;
-
-	if (list_empty(&ir_devices_list))
-		return NULL;
-
-	list_for_each_entry(ir, &ir_devices_list, list)
-		if (ir->adapter == adapter) {
-			get_ir_device(ir, true);
-			return ir;
-		}
-
-	return NULL;
-}
-
 static int ir_probe(struct i2c_client *client, const struct
 i2c_device_id *id)
 {
-	struct IR *ir;
 	struct IR_tx *tx;
-	struct IR_rx *rx;
 	struct i2c_adapter *adap = client->adapter;
 	int ret;
-	bool tx_probe = false;

dev_dbg(&client->dev, "%s: %s on i2c-%d (%s), client
addr=0x%02x\n",
__func__, id->name, adap->nr, adap->name, client-

Quoted 1 line

addr);

drivers/staging/media/lirc/lirc_zilog.c +0 -11
@@ -1405,209 +807,61 @@ static int ir_probe(struct i2c_client
 *client, const struct i2c_device_id *id)
 	 * The IR transmitter is at i2c address 0x70.
 	 */
 
-	if (id->driver_data & ID_FLAG_TX)
-		tx_probe = true;
-	else if (tx_only) /* module option */
-		return -ENXIO;
-
-	pr_info("probing IR %s on %s (i2c-%d)\n",
-		tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-
-	mutex_lock(&ir_devices_lock);
-
-	/* Use a single struct IR instance for both the Rx and Tx

functions */

drivers/staging/media/lirc/lirc_zilog.c +0 -10
-	ir = get_ir_device_by_adapter(adap);
-	if (!ir) {
-		ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-		if (!ir) {
-			ret = -ENOMEM;
-			goto out_no_ir;
-		}
-		kref_init(&ir->ref);
-
-		/* store for use in ir_probe() again, and open()

later on */

drivers/staging/media/lirc/lirc_zilog.c +0 -18
-		INIT_LIST_HEAD(&ir->list);
-		list_add_tail(&ir->list, &ir_devices_list);
-
-		ir->adapter = adap;
-		ir->dev = &adap->dev;
-		mutex_init(&ir->ir_lock);
-		atomic_set(&ir->open_count, 0);
-		spin_lock_init(&ir->tx_ref_lock);
-		spin_lock_init(&ir->rx_ref_lock);
-
-		/* set lirc_dev stuff */
-		ir->l = lirc_allocate_device();
-		if (!ir->l) {
-			ret = -ENOMEM;
-			goto out_put_ir;
-		}
-
-		snprintf(ir->l->name, sizeof(ir->l->name),

"lirc_zilog");

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-		ir->l->code_length = 13;
-		ir->l->fops = &lirc_fops;
-		ir->l->owner = THIS_MODULE;
-		ir->l->dev.parent = &adap->dev;
-
-		/*
-		 * FIXME this is a pointer reference to us, but no

refcount.

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-		 *
-		 * This OK for now, since lirc_dev currently won't

touch this

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 * buffer as we provide our own lirc_fops.
-		 *
-		 * Currently our own lirc_fops rely on this ir->l-
Quoted 1 line

buf pointer

drivers/staging/media/lirc/lirc_zilog.c +1 -11
-		 */
-		ir->l->buf = &ir->rbuf;
-		/* This will be returned by lirc_get_pdata() */
-		ir->l->data = ir;
-		ret = lirc_buffer_init(ir->l->buf, 2, BUFLEN / 2);
-		if (ret) {
-			lirc_free_device(ir->l);
-			ir->l = NULL;
-			goto out_put_ir;
-		}
-	}
+	pr_info("probing IR Tx on %s (i2c-%d)\n", adap->name, adap-
Quoted 1 line

nr);

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-	if (tx_probe) {
-		/* Get the IR_rx instance for later, if already

allocated */

drivers/staging/media/lirc/lirc_zilog.c +0 -17
-		rx = get_ir_rx(ir);
-
-		/* Set up a struct IR_tx instance */
-		tx = kzalloc(sizeof(*tx), GFP_KERNEL);
-		if (!tx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&tx->ref);
-		ir->tx = tx;
-
-		ir->l->features |= LIRC_CAN_SEND_LIRCCODE;
-		mutex_init(&tx->client_lock);
-		tx->c = client;
-		tx->need_boot = 1;
-		tx->post_tx_ready_poll =
-			       (id->driver_data & ID_FLAG_HDPVR) ?

false : true;

drivers/staging/media/lirc/lirc_zilog.c +0 -9
-
-		/* An ir ref goes to the struct IR_tx instance */
-		tx->ir = get_ir_device(ir, true);
-
-		/* A tx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_tx(ir));
-
-		/*
-		 * Load the 'firmware'.  We do this before

registering with

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * lirc_dev, so the first firmware load attempt does

not happen

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 * after a open() or write() call on the device.
-		 *
-		 * Failure here is not deemed catastrophic, so the

receiver will

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * still be usable.  Firmware load will be retried

in write(),

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-		 * if it is needed.
-		 */
-		fw_load(tx);
-
-		/* Proceed only if the Rx client is also ready or

not needed */

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		if (!rx && !tx_only) {
-			dev_info(tx->ir->dev,
-				 "probe of IR Tx on %s (i2c-%d)

done. Waiting on IR Rx.\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				 adap->name, adap->nr);
-			goto out_ok;
-		}
-	} else {
-		/* Get the IR_tx instance for later, if already

allocated */

drivers/staging/media/lirc/lirc_zilog.c +0 -16
-		tx = get_ir_tx(ir);
-
-		/* Set up a struct IR_rx instance */
-		rx = kzalloc(sizeof(*rx), GFP_KERNEL);
-		if (!rx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&rx->ref);
-		ir->rx = rx;
-
-		ir->l->features |= LIRC_CAN_REC_LIRCCODE;
-		mutex_init(&rx->client_lock);
-		rx->c = client;
-		rx->hdpvr_data_fmt =
-			       (id->driver_data & ID_FLAG_HDPVR) ?

true : false;

drivers/staging/media/lirc/lirc_zilog.c +8 -8
-
-		/* An ir ref goes to the struct IR_rx instance */
-		rx->ir = get_ir_device(ir, true);
+	/* Set up a struct IR_tx instance */
+	tx = devm_kzalloc(&client->dev, sizeof(*tx), GFP_KERNEL);
+	if (!tx)
+		return -ENOMEM;
 
-		/* An rx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_rx(ir));
+	mutex_init(&tx->client_lock);
+	tx->c = client;
+	tx->need_boot = 1;
+	tx->post_tx_ready_poll = !(id->driver_data & ID_FLAG_HDPVR);
 
-		/*
-		 * Start the polling thread.
-		 * It will only perform an empty loop around

schedule_timeout()

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * until we register with lirc_dev and the first

user open()

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 */
-		/* An ir ref goes to the new rx polling kthread */
-		rx->task = kthread_run(lirc_thread,

get_ir_device(ir, true),

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				       "zilog-rx-i2c-%d", adap->nr);
-		if (IS_ERR(rx->task)) {
-			ret = PTR_ERR(rx->task);
-			dev_err(tx->ir->dev,
-				"%s: could not start IR Rx polling

thread\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-				__func__);
-			/* Failed kthread, so put back the ir ref */
-			put_ir_device(ir, true);
-			/* Failure exit, so put back rx ref from

i2c_client */

drivers/staging/media/lirc/lirc_zilog.c +4 -8
-			i2c_set_clientdata(client, NULL);
-			put_ir_rx(rx, true);
-			ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-			goto out_put_tx;
-		}
+	/* set lirc_dev stuff */
+	tx->l = lirc_allocate_device();
+	if (!tx->l)
+		return -ENOMEM;
 
-		/* Proceed only if the Tx client is also ready */
-		if (!tx) {
-			pr_info("probe of IR Rx on %s (i2c-%d) done.

Waiting on IR Tx.\n",

drivers/staging/media/lirc/lirc_zilog.c +8 -7
-				adap->name, adap->nr);
-			goto out_ok;
-		}
-	}
+	snprintf(tx->l->name, sizeof(tx->l->name), "lirc_zilog");
+	tx->l->features |= LIRC_CAN_SEND_LIRCCODE;
+	tx->l->code_length = 13;
+	tx->l->fops = &lirc_fops;
+	tx->l->owner = THIS_MODULE;
+	tx->l->dev.parent = &client->dev;
 
 	/* register with lirc */
-	ret = lirc_register_device(ir->l);
+	ret = lirc_register_device(tx->l);
 	if (ret < 0) {
-		dev_err(tx->ir->dev,
-			"%s: lirc_register_device() failed: %i\n",
+		dev_err(&tx->l->dev, "%s: lirc_register_device()

failed: %i\n",

drivers/staging/media/lirc/lirc_zilog.c +6 -4
 			__func__, ret);
-		lirc_free_device(ir->l);
-		ir->l = NULL;
-		goto out_put_xx;
+		lirc_free_device(tx->l);
+		tx->l = NULL;
+		return ret;
 	}
 
-	dev_info(ir->dev,
+	/*
+	 * Load the 'firmware'.  We do this before registering with
+	 * lirc_dev, so the first firmware load attempt does not

happen

drivers/staging/media/lirc/lirc_zilog.c +12 -0
+	 * after a open() or write() call on the device.
+	 */
+	ret = fw_load(tx);
+	if (ret < 0) {
+		lirc_unregister_device(tx->l);
+		return ret;
+	}
+
+	/* A tx ref goes to the i2c_client */
+	i2c_set_clientdata(client, tx);
+
+	dev_info(&tx->l->dev,
 		 "IR unit on %s (i2c-%d) registered as lirc%d and

ready\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -25
-		 adap->name, adap->nr, ir->l->minor);
-
-out_ok:
-	if (rx)
-		put_ir_rx(rx, true);
-	if (tx)
-		put_ir_tx(tx, true);
-	put_ir_device(ir, true);
-	dev_info(ir->dev,
-		 "probe of IR %s on %s (i2c-%d) done\n",
-		 tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-	mutex_unlock(&ir_devices_lock);
-	return 0;
+		 adap->name, adap->nr, tx->l->minor);
 
-out_put_xx:
-	if (rx)
-		put_ir_rx(rx, true);
-out_put_tx:
-	if (tx)
-		put_ir_tx(tx, true);
-out_put_ir:
-	put_ir_device(ir, true);
-out_no_ir:
-	dev_err(&client->dev,
-		"%s: probing IR %s on %s (i2c-%d) failed with %d\n",
-		__func__, tx_probe ? "Tx" : "Rx", adap->name, adap-
Quoted 1 line

nr, ret);

drivers/staging/media/lirc/lirc_zilog.c +2 -2
-	mutex_unlock(&ir_devices_lock);
-	return ret;
+	dev_info(&tx->l->dev,
+		 "probe of IR Tx on %s (i2c-%d) done\n", adap->name, 

adap->nr);

drivers/staging/media/lirc/lirc_zilog.c +1 -3
+	return 0;
 }
 
 static int __init zilog_init(void)
@@ -1648,6 +902,3 @@ MODULE_ALIAS("lirc_pvr150");
 
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Enable debugging messages");
-
-module_param(tx_only, bool, 0644);
-MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function");
author maintainer
#6 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

Quoted 11 lines · Andy Walls
Quoted 1 line · Sean Young

The ir-kbd-i2c module already handles this very well.

Hi Sean:

It's been years, but my recollection is that although ir-kdb-i2c might handle receive well, but since the 4 i2c addresses (1 Rx, 1 Tx, 1 IR Tx code learning, 1 custom Tx code) are all handled by the same Zilog microcontroller internally, that splitting the Rx and Tx functionality between two modules became problematic.

Quoted 8 lines

Believe me, if i could have leveraged ir-kdb-i2c back when I ported this, I would have. I think it's a very bad idea to remove the receiver from lirc_zilog.

The cx18 and ivtv drivers both use lirc_zilog IIRC. Have you looked at the changes required to have the first I2C address used by one i2c module, and the next one (or three) I2C addresses used by another i2c module?

This is already the case.

In current kernels you can use ir-kbd-i2c for Rx and lirc_zilog for Tx, this works fine. In fact, the lirc_zilog Rx code produces lirccodes, (not mode2) and ir-kbd-i2c produces keycodes through rc-core, so ir-kbd-i2c (also mainline, not staging) is much more likely to be used for Rx. For Tx you have to use lirc_zilog.

I haven't heard of any reports of problems (or observed this myself) when using these two modules together.

As you point out, both drivers sending i2c commands to the same z8f0811 with its z8 encore hand-coded i2c implementation. But they're using different addresses.

So removing the lirc_zilog Rx doesn't make things worse, in fact, it just removes some code which is unlikely to be used.

It's the hdpvr, ivtv, cx18 and pvrusb2 drivers which have a Tx interface. I have hdpvr and ivtv hardware to test.

Sean

Quoted 1,385 lines

-Andy

Quoted 1,381 lines
---
 drivers/staging/media/lirc/lirc_zilog.c | 901 +++-------------------
----------
 1 file changed, 76 insertions(+), 825 deletions(-)
drivers/staging/media/lirc/lirc_zilog.c +0 -77
index 6bd0717bf76e..757b3fc247ac 100644
@@ -64,28 +64,7 @@
 /* Max transfer size done by I2C transfer functions */
 #define MAX_XFER_SIZE  64
 
-struct IR;
-
-struct IR_rx {
-	struct kref ref;
-	struct IR *ir;
-
-	/* RX device */
-	struct mutex client_lock;
-	struct i2c_client *c;
-
-	/* RX polling thread data */
-	struct task_struct *task;
-
-	/* RX read data */
-	unsigned char b[3];
-	bool hdpvr_data_fmt;
-};
-
 struct IR_tx {
-	struct kref ref;
-	struct IR *ir;
-
 	/* TX device */
 	struct mutex client_lock;
 	struct i2c_client *c;
@@ -93,39 +72,9 @@ struct IR_tx {
 	/* TX additional actions needed */
 	int need_boot;
 	bool post_tx_ready_poll;
-};
-
-struct IR {
-	struct kref ref;
-	struct list_head list;
-
-	/* FIXME spinlock access to l->features */
 	struct lirc_dev *l;
-	struct lirc_buffer rbuf;
-
-	struct mutex ir_lock;
-	atomic_t open_count;
-
-	struct device *dev;
-	struct i2c_adapter *adapter;
-
-	spinlock_t rx_ref_lock; /* struct IR_rx kref get()/put() */
-	struct IR_rx *rx;
-
-	spinlock_t tx_ref_lock; /* struct IR_tx kref get()/put() */
-	struct IR_tx *tx;
 };
 
-/* IR transceiver instance object list */
-/*
- * This lock is used for the following:
- * a. ir_devices_list access, insertions, deletions
- * b. struct IR kref get()s and put()s
- * c. serialization of ir_probe() for the two i2c_clients for a Z8
- */
-static DEFINE_MUTEX(ir_devices_lock);
-static LIST_HEAD(ir_devices_list);
-
 /* Block size for IR transmitter */
 #define TX_BLOCK_SIZE	99
 
@@ -153,348 +102,8 @@ struct tx_data_struct {
 static struct tx_data_struct *tx_data;
 static struct mutex tx_data_lock;
 
-
 /* module parameters */
 static bool debug;	/* debug output */
-static bool tx_only;	/* only handle the IR Tx function */
-
-
-/* struct IR reference counting */
-static struct IR *get_ir_device(struct IR *ir, bool
 ir_devices_lock_held)
-{
-	if (ir_devices_lock_held) {
-		kref_get(&ir->ref);
-	} else {
-		mutex_lock(&ir_devices_lock);
-		kref_get(&ir->ref);
-		mutex_unlock(&ir_devices_lock);
-	}
-	return ir;
-}
-
-static void release_ir_device(struct kref *ref)
-{
-	struct IR *ir = container_of(ref, struct IR, ref);
-
-	/*
-	 * Things should be in this state by now:
-	 * ir->rx set to NULL and deallocated - happens before ir-
 >rx->ir put()
-	 * ir->rx->task kthread stopped - happens before ir->rx->ir
 put()
-	 * ir->tx set to NULL and deallocated - happens before ir-
Quoted 1 line

tx->ir put()

drivers/staging/media/lirc/lirc_zilog.c +0 -40
-	 * ir->open_count ==  0 - happens on final close()
-	 * ir_lock, tx_ref_lock, rx_ref_lock, all released
-	 */
-	if (ir->l)
-		lirc_unregister_device(ir->l);
-
-	if (kfifo_initialized(&ir->rbuf.fifo))
-		lirc_buffer_free(&ir->rbuf);
-	list_del(&ir->list);
-	kfree(ir);
-}
-
-static int put_ir_device(struct IR *ir, bool ir_devices_lock_held)
-{
-	int released;
-
-	if (ir_devices_lock_held)
-		return kref_put(&ir->ref, release_ir_device);
-
-	mutex_lock(&ir_devices_lock);
-	released = kref_put(&ir->ref, release_ir_device);
-	mutex_unlock(&ir_devices_lock);
-
-	return released;
-}
-
-/* struct IR_rx reference counting */
-static struct IR_rx *get_ir_rx(struct IR *ir)
-{
-	struct IR_rx *rx;
-
-	spin_lock(&ir->rx_ref_lock);
-	rx = ir->rx;
-	if (rx)
-		kref_get(&rx->ref);
-	spin_unlock(&ir->rx_ref_lock);
-	return rx;
-}
-
-static void destroy_rx_kthread(struct IR_rx *rx, bool

ir_devices_lock_held)

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-{
-	/* end up polling thread */
-	if (!IS_ERR_OR_NULL(rx->task)) {
-		kthread_stop(rx->task);
-		rx->task = NULL;
-		/* Put the ir ptr that ir_probe() gave to the rx

poll thread */

drivers/staging/media/lirc/lirc_zilog.c +0 -12
-		put_ir_device(rx->ir, ir_devices_lock_held);
-	}
-}
-
-static void release_ir_rx(struct kref *ref)
-{
-	struct IR_rx *rx = container_of(ref, struct IR_rx, ref);
-	struct IR *ir = rx->ir;
-
-	/*
-	 * This release function can't do all the work, as we want
-	 * to keep the rx_ref_lock a spinlock, and killing the poll

thread

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-	 * and releasing the ir reference can cause a sleep.  That

work is

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-	 * performed by put_ir_rx()
-	 */
-	ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-	/* Don't put_ir_device(rx->ir) here; lock can't be freed yet

*/

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-	ir->rx = NULL;
-	/* Don't do the kfree(rx) here; we still need to kill the

poll thread */

drivers/staging/media/lirc/lirc_zilog.c +0 -15
-}
-
-static int put_ir_rx(struct IR_rx *rx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = rx->ir;
-
-	spin_lock(&ir->rx_ref_lock);
-	released = kref_put(&rx->ref, release_ir_rx);
-	spin_unlock(&ir->rx_ref_lock);
-	/* Destroy the rx kthread while not holding the spinlock */
-	if (released) {
-		destroy_rx_kthread(rx, ir_devices_lock_held);
-		kfree(rx);
-		/* Make sure we're not still in a poll_table

somewhere */

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		wake_up_interruptible(&ir->rbuf.wait_poll);
-	}
-	/* Do a reference put() for the rx->ir reference, if we

released rx */

drivers/staging/media/lirc/lirc_zilog.c +0 -25
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-/* struct IR_tx reference counting */
-static struct IR_tx *get_ir_tx(struct IR *ir)
-{
-	struct IR_tx *tx;
-
-	spin_lock(&ir->tx_ref_lock);
-	tx = ir->tx;
-	if (tx)
-		kref_get(&tx->ref);
-	spin_unlock(&ir->tx_ref_lock);
-	return tx;
-}
-
-static void release_ir_tx(struct kref *ref)
-{
-	struct IR_tx *tx = container_of(ref, struct IR_tx, ref);
-	struct IR *ir = tx->ir;
-
-	ir->l->features &= ~LIRC_CAN_SEND_LIRCCODE;
-	/* Don't put_ir_device(tx->ir) here, so our lock doesn't get

freed */

drivers/staging/media/lirc/lirc_zilog.c +0 -13
-	ir->tx = NULL;
-	kfree(tx);
-}
-
-static int put_ir_tx(struct IR_tx *tx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = tx->ir;
-
-	spin_lock(&ir->tx_ref_lock);
-	released = kref_put(&tx->ref, release_ir_tx);
-	spin_unlock(&ir->tx_ref_lock);
-	/* Do a reference put() for the tx->ir reference, if we

released tx */

drivers/staging/media/lirc/lirc_zilog.c +0 -28
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-static int add_to_buf(struct IR *ir)
-{
-	__u16 code;
-	unsigned char codes[2];
-	unsigned char keybuf[6];
-	int got_data = 0;
-	int ret;
-	int failures = 0;
-	unsigned char sendbuf[1] = { 0 };
-	struct lirc_buffer *rbuf = ir->l->buf;
-	struct IR_rx *rx;
-	struct IR_tx *tx;
-
-	if (lirc_buffer_full(rbuf)) {
-		dev_dbg(ir->dev, "buffer overflow\n");
-		return -EOVERFLOW;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/* Ensure our rx->c i2c_client remains valid for the

duration */

drivers/staging/media/lirc/lirc_zilog.c +0 -21
-	mutex_lock(&rx->client_lock);
-	if (!rx->c) {
-		mutex_unlock(&rx->client_lock);
-		put_ir_rx(rx, false);
-		return -ENXIO;
-	}
-
-	tx = get_ir_tx(ir);
-
-	/*
-	 * service the device as long as it is returning
-	 * data and we have space
-	 */
-	do {
-		if (kthread_should_stop()) {
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Lock i2c bus for the duration.  RX/TX chips

interfere so

drivers/staging/media/lirc/lirc_zilog.c +0 -12
-		 * this is worth it
-		 */
-		mutex_lock(&ir->ir_lock);
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Send random "poll command" (?)  Windows driver

does this

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-		 * and it is a good point to detect chip failure.
-		 */
-		ret = i2c_master_send(rx->c, sendbuf, 1);
-		if (ret != 1) {
-			dev_err(ir->dev, "i2c_master_send failed

with %d\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				ret);
-			if (failures >= 3) {
-				mutex_unlock(&ir->ir_lock);
-				dev_err(ir->dev,
-					"unable to read from the IR

chip after 3 resets, giving up\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-				break;
-			}
-
-			/* Looks like the chip crashed, reset it */
-			dev_err(ir->dev,
-				"polling the IR receiver chip

failed, trying reset\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -23
-
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			if (kthread_should_stop()) {
-				mutex_unlock(&ir->ir_lock);
-				ret = -ENODATA;
-				break;
-			}
-			schedule_timeout((100 * HZ + 999) / 1000);
-			if (tx)
-				tx->need_boot = 1;
-
-			++failures;
-			mutex_unlock(&ir->ir_lock);
-			ret = 0;
-			continue;
-		}
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-		ret = i2c_master_recv(rx->c, keybuf,

sizeof(keybuf));

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-		mutex_unlock(&ir->ir_lock);
-		if (ret != sizeof(keybuf)) {
-			dev_err(ir->dev,
-				"i2c_master_recv failed with %d --

keeping last read buffer\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -16
-				ret);
-		} else {
-			rx->b[0] = keybuf[3];
-			rx->b[1] = keybuf[4];
-			rx->b[2] = keybuf[5];
-			dev_dbg(ir->dev,
-				"key (0x%02x/0x%02x)\n",
-				rx->b[0], rx->b[1]);
-		}
-
-		/* key pressed ? */
-		if (rx->hdpvr_data_fmt) {
-			if (got_data && (keybuf[0] == 0x80)) {
-				ret = 0;
-				break;
-			} else if (got_data && (keybuf[0] == 0x00))

{

drivers/staging/media/lirc/lirc_zilog.c +0 -10
-				ret = -ENODATA;
-				break;
-			}
-		} else if ((rx->b[0] & 0x80) == 0) {
-			ret = got_data ? 0 : -ENODATA;
-			break;
-		}
-
-		/* look what we have */
-		code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1]
Quoted 1 line
Quoted 1 line

2);

drivers/staging/media/lirc/lirc_zilog.c +0 -20
-
-		codes[0] = (code >> 8) & 0xff;
-		codes[1] = code & 0xff;
-
-		/* return it */
-		lirc_buffer_write(rbuf, codes);
-		++got_data;
-		ret = 0;
-	} while (!lirc_buffer_full(rbuf));
-
-	mutex_unlock(&rx->client_lock);
-	if (tx)
-		put_ir_tx(tx, false);
-	put_ir_rx(rx, false);
-	return ret;
-}
-
-/*
- * Main function of the polling thread -- from lirc_dev.
- * We don't fit the LIRC model at all anymore.  This is horrible,

but
- * basically we have a single RX/TX device with a nasty failure mode
- * that needs to be accounted for across the pair. lirc lets us provide
- * fops, but prevents us from using the internal polling, etc. if we do
- * so. Hence the replication. Might be neater to extend the LIRC model
- * to account for this but I'd think it's a very special case of seriously
- * messed up hardware.
- */

drivers/staging/media/lirc/lirc_zilog.c +0 -11
-static int lirc_thread(void *arg)
-{
-	struct IR *ir = arg;
-	struct lirc_buffer *rbuf = ir->l->buf;
-
-	dev_dbg(ir->dev, "poll thread started\n");
-
-	while (!kthread_should_stop()) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		/* if device not opened, we can sleep half a second

*/

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-		if (atomic_read(&ir->open_count) == 0) {
-			schedule_timeout(HZ / 2);
-			continue;
-		}
-
-		/*
-		 * This is ~113*2 + 24 + jitter (2*repeat gap + code

length).

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * We use this interval as the chip resets every

time you poll

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * it (bad!).  This is therefore just sufficient to

catch all

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * of the button presses.  It makes the remote much

more

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * responsive.  You can see the difference by

running irw and

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * holding down a button.  With 100ms, the old

polling

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * interval, you'll notice breaks in the repeat

sequence

drivers/staging/media/lirc/lirc_zilog.c +2 -14
-		 * corresponding to lost keypresses.
-		 */
-		schedule_timeout((260 * HZ) / 1000);
-		if (kthread_should_stop())
-			break;
-		if (!add_to_buf(ir))
-			wake_up_interruptible(&rbuf->wait_poll);
-	}
-
-	dev_dbg(ir->dev, "poll thread ended\n");
-	return 0;
-}
 
 /* safe read of a uint32 (always network byte order) */
 static int read_uint32(unsigned char **data,
@@ -645,10 +254,10 @@ static int send_data_block(struct IR_tx *tx,
 unsigned char *data_block)
 		buf[0] = (unsigned char)(i + 1);
 		for (j = 0; j < tosend; ++j)
 			buf[1 + j] = data_block[i + j];
-		dev_dbg(tx->ir->dev, "%*ph", 5, buf);
+		dev_dbg(&tx->l->dev, "%*ph", 5, buf);
 		ret = i2c_master_send(tx->c, buf, tosend + 1);
 		if (ret != tosend + 1) {
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"i2c_master_send failed with %d\n",
 ret);
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			return ret < 0 ? ret : -EFAULT;
 		}
@@ -673,7 +282,7 @@ static int send_boot_data(struct IR_tx *tx)
 	buf[1] = 0x20;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
drivers/staging/media/lirc/lirc_zilog.c +3 -3
 	}
@@ -690,22 +299,22 @@ static int send_boot_data(struct IR_tx *tx)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Here comes the firmware version... (hopefully) */
 	ret = i2c_master_recv(tx->c, buf, 4);
 	if (ret != 4) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return 0;
 	}
 	if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
-		dev_err(tx->ir->dev, "unexpected IR TX init
 response: %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX init
 response: %02x\n",
 			buf[0]);
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 		return 0;
 	}
-	dev_notice(tx->ir->dev,
+	dev_notice(&tx->l->dev,
 		   "Zilog/Hauppauge IR blaster firmware version

%d.%d.%d loaded\n",

drivers/staging/media/lirc/lirc_zilog.c +2 -3
 		   buf[1], buf[2], buf[3]);
@@ -750,15 +359,15 @@ static int fw_load(struct IR_tx *tx)
 	}
 
 	/* Request codeset data file */
-	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", tx-
 >ir->dev);
+	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin",
 &tx->l->dev);
 	if (ret != 0) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"firmware haup-ir-blaster.bin not available
 (%d)\n",
 			ret);
 		ret = ret < 0 ? ret : -EFAULT;
 		goto out;
 	}
-	dev_dbg(tx->ir->dev, "firmware of size %zu loaded\n",

fw_entry->size);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+	dev_dbg(&tx->l->dev, "firmware of size %zu loaded\n",

fw_entry->size);

drivers/staging/media/lirc/lirc_zilog.c +1 -1
 	/* Parse the file */
 	tx_data = vmalloc(sizeof(*tx_data));
@@ -786,7 +395,7 @@ static int fw_load(struct IR_tx *tx)
 	if (!read_uint8(&data, tx_data->endp, &version))
 		goto corrupt;
 	if (version != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"unsupported code set file version (%u,
 expected 1) -- please upgrade to a newer driver\n",
 			version);
drivers/staging/media/lirc/lirc_zilog.c +2 -26
 		fw_unload_locked();
@@ -803,7 +412,7 @@ static int fw_load(struct IR_tx *tx)
 			 &tx_data->num_code_sets))
 		goto corrupt;
 
-	dev_dbg(tx->ir->dev, "%u IR blaster codesets loaded\n",
+	dev_dbg(&tx->l->dev, "%u IR blaster codesets loaded\n",
 		tx_data->num_code_sets);
 
 	tx_data->code_sets = vmalloc(
@@ -868,7 +477,7 @@ static int fw_load(struct IR_tx *tx)
 	goto out;
 
 corrupt:
-	dev_err(tx->ir->dev, "firmware is corrupt\n");
+	dev_err(&tx->l->dev, "firmware is corrupt\n");
 	fw_unload_locked();
 	ret = -EFAULT;
 
@@ -877,94 +486,6 @@ static int fw_load(struct IR_tx *tx)
 	return ret;
 }
 
-/* copied from lirc_dev */
-static ssize_t read(struct file *filep, char __user *outbuf, size_t
 n,
-		    loff_t *ppos)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	int ret = 0, written = 0, retries = 0;
-	unsigned int m;
-	DECLARE_WAITQUEUE(wait, current);
-
-	dev_dbg(ir->dev, "read called\n");
-	if (n % rbuf->chunk_size) {
-		dev_dbg(ir->dev, "read result = -EINVAL\n");
-		return -EINVAL;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/*
-	 * we add ourselves to the task queue before buffer check
-	 * to avoid losing scan code (in case when queue is awaken

somewhere

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-	 * between while condition checking and scheduling)
-	 */
-	add_wait_queue(&rbuf->wait_poll, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	/*
-	 * while we didn't provide 'length' bytes, device is opened

in blocking

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	 * mode and 'copy_to_user' is happy, wait for data.
-	 */
-	while (written < n && ret == 0) {
-		if (lirc_buffer_empty(rbuf)) {
-			/*
-			 * According to the read(2) man page,

'written' can be

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-			 * returned as less than 'n', instead of

blocking

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-			 * again, returning -EWOULDBLOCK, or

returning

drivers/staging/media/lirc/lirc_zilog.c +0 -20
-			 * -ERESTARTSYS
-			 */
-			if (written)
-				break;
-			if (filep->f_flags & O_NONBLOCK) {
-				ret = -EWOULDBLOCK;
-				break;
-			}
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-		} else {
-			unsigned char buf[MAX_XFER_SIZE];
-
-			if (rbuf->chunk_size > sizeof(buf)) {
-				dev_err(ir->dev,
-					"chunk_size is too big

(%d)!\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-					rbuf->chunk_size);
-				ret = -EINVAL;
-				break;
-			}
-			m = lirc_buffer_read(rbuf, buf);
-			if (m == rbuf->chunk_size) {
-				ret = copy_to_user(outbuf + written,

buf,

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-						   rbuf-
Quoted 1 line

chunk_size);

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-				written += rbuf->chunk_size;
-			} else {
-				retries++;
-			}
-			if (retries >= 5) {
-				dev_err(ir->dev, "Buffer read

failed!\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -15
-				ret = -EIO;
-			}
-		}
-	}
-
-	remove_wait_queue(&rbuf->wait_poll, &wait);
-	put_ir_rx(rx, false);
-	set_current_state(TASK_RUNNING);
-
-	dev_dbg(ir->dev, "read result = %d (%s)\n", ret,
-		ret ? "Error" : "OK");
-
-	return ret ? ret : written;
-}
-
 /* send a keypress to the IR TX device */
 static int send_code(struct IR_tx *tx, unsigned int code, unsigned

int key)
{

drivers/staging/media/lirc/lirc_zilog.c +1 -1
@@ -976,7 +497,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	ret = get_key_data(data_block, code, key);
 
 	if (ret == -EPROTO) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"failed to get data for code %u, key %u --
 check lircd.conf entries\n",
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			code, key);
 		return ret;
@@ -994,7 +515,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	buf[1] = 0x40;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		return ret < 0 ? ret : -EFAULT;
 	}
@@ -1007,18 +528,18 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Send finished download? */
 	ret = i2c_master_recv(tx->c, buf, 1);
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
drivers/staging/media/lirc/lirc_zilog.c +0 -1
 	if (buf[0] != 0xA0) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #1:

%02x\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+		dev_err(&tx->l->dev, "unexpected IR TX response #1:

%02x\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			buf[0]);
 		return -EFAULT;
 	}
@@ -1028,7 +549,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	buf[1] = 0x80;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
drivers/staging/media/lirc/lirc_zilog.c +0 -0
 		return ret < 0 ? ret : -EFAULT;
 	}
@@ -1038,7 +559,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	 * going to skip this whole mess and say we're done on the

HD PVR

drivers/staging/media/lirc/lirc_zilog.c +0 -1
 	 */
 	if (!tx->post_tx_ready_poll) {
-		dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code,

key);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+		dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code,

key);

drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		return 0;
 	}
@@ -1054,12 +575,12 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 		ret = i2c_master_send(tx->c, buf, 1);
 		if (ret == 1)
 			break;
-		dev_dbg(tx->ir->dev,
+		dev_dbg(&tx->l->dev,
 			"NAK expected: i2c_master_send failed with
 %d (try %d)\n",
 			ret, i + 1);
 	}
 	if (ret != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"IR TX chip never got ready: last

i2c_master_send failed with %d\n",

drivers/staging/media/lirc/lirc_zilog.c +2 -2
 			ret);
 		return ret < 0 ? ret : -EFAULT;
@@ -1068,17 +589,17 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 	/* Seems to be an 'ok' response */
 	i = i2c_master_recv(tx->c, buf, 1);
 	if (i != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return -EFAULT;
 	}
 	if (buf[0] != 0x80) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #2:
 %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX response #2:
 %02x\n",
 			buf[0]);
 		return -EFAULT;
 	}
 
drivers/staging/media/lirc/lirc_zilog.c +2 -3
 	/* Oh good, it worked */
-	dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code, key);
+	dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code, key);
 	return 0;
 }
@@ -1091,8 +612,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 static ssize_t write(struct file *filep, const char __user *buf,
 size_t n,
 		     loff_t *ppos)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_tx *tx;
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	size_t i;
drivers/staging/media/lirc/lirc_zilog.c +0 -5
 	int failures = 0;
@@ -1100,31 +620,20 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 	if (n % sizeof(int))
 		return -EINVAL;
 
-	/* Get a struct IR_tx reference */
-	tx = get_ir_tx(ir);
-	if (!tx)
-		return -ENXIO;
-
 	/* Ensure our tx->c i2c_client remains valid for the

duration */

drivers/staging/media/lirc/lirc_zilog.c +0 -4
 	mutex_lock(&tx->client_lock);
 	if (!tx->c) {
 		mutex_unlock(&tx->client_lock);
-		put_ir_tx(tx, false);
 		return -ENXIO;
 	}
 
-	/* Lock i2c bus for the duration */
-	mutex_lock(&ir->ir_lock);
-
 	/* Send each keypress */
 	for (i = 0; i < n;) {
 		int ret = 0;
 		int command;
 
 		if (copy_from_user(&command, buf + i,

sizeof(command))) {

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-			mutex_unlock(&ir->ir_lock);
 			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
 			return -EFAULT;
 		}
@@ -1133,9 +642,7 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 			/* Make sure we have the 'firmware' loaded,

first */

drivers/staging/media/lirc/lirc_zilog.c +0 -4
 			ret = fw_load(tx);
 			if (ret != 0) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
 				if (ret != -ENOMEM)
 					ret = -EIO;
 				return ret;
@@ -1151,9 +658,7 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 			ret = send_code(tx, (unsigned int)command >>
 16,
 					    (unsigned int)command &
 0xFFFF);
 			if (ret == -EPROTO) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
drivers/staging/media/lirc/lirc_zilog.c +2 -4
 				return ret;
 			}
 		}
@@ -1164,15 +669,13 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 		 */
 		if (ret != 0) {
 			/* Looks like the chip crashed, reset it */
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"sending to the IR transmitter chip
 failed, trying reset\n");
 
 			if (failures >= 3) {
-				dev_err(tx->ir->dev,
+				dev_err(&tx->l->dev,
 					"unable to send to the IR
 chip after 3 resets, giving up\n");
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
drivers/staging/media/lirc/lirc_zilog.c +0 -20
 				return ret;
 			}
 			set_current_state(TASK_UNINTERRUPTIBLE);
@@ -1184,60 +687,21 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 		}
 	}
 
-	/* Release i2c bus */
-	mutex_unlock(&ir->ir_lock);
-
 	mutex_unlock(&tx->client_lock);
 
-	/* Give back our struct IR_tx reference */
-	put_ir_tx(tx, false);
-
 	/* All looks good */
 	return n;
 }
 
-/* copied from lirc_dev */
-static unsigned int poll(struct file *filep, poll_table *wait)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	unsigned int ret;
-
-	dev_dbg(ir->dev, "%s called\n", __func__);
-
-	rx = get_ir_rx(ir);
-	if (!rx) {
-		/*
-		 * Revisit this, if our poll function ever reports

writeable

drivers/staging/media/lirc/lirc_zilog.c +0 -8
-		 * status for Tx
-		 */
-		dev_dbg(ir->dev, "%s result = POLLERR\n", __func__);
-		return POLLERR;
-	}
-
-	/*
-	 * Add our lirc_buffer's wait_queue to the poll_table. A

wake up on

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-	 * that buffer's wait queue indicates we may have a new poll

status.

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-	 */
-	poll_wait(filep, &rbuf->wait_poll, wait);
-
-	/* Indicate what ops could happen immediately without

blocking */

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	ret = lirc_buffer_empty(rbuf) ? 0 : (POLLIN | POLLRDNORM);
-
-	dev_dbg(ir->dev, "%s result = %s\n", __func__,
-		ret ? "POLLIN|POLLRDNORM" : "none");
-	return ret;
-}
 
 static long ioctl(struct file *filep, unsigned int cmd, unsigned

long arg)
{

drivers/staging/media/lirc/lirc_zilog.c +2 -8
-	struct IR *ir = lirc_get_pdata(filep);
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	unsigned long __user *uptr = (unsigned long __user *)arg;
 	int result;
 	unsigned long mode, features;
 
-	features = ir->l->features;
+	features = tx->l->features;
 
 	switch (cmd) {
 	case LIRC_GET_LENGTH:
@@ -1287,13 +751,7 @@ static long ioctl(struct file *filep, unsigned
 int cmd, unsigned long arg)
  */
 static int open(struct inode *node, struct file *filep)
 {
-	struct IR *ir;
-
 	lirc_init_pdata(node, filep);
-	ir = lirc_get_pdata(filep);
-
-	atomic_inc(&ir->open_count);
-
 	nonseekable_open(node, filep);
 	return 0;

}

drivers/staging/media/lirc/lirc_zilog.c +3 -12
@@ -1301,25 +759,16 @@ static int open(struct inode *node, struct
 file *filep)
 /* Close the IR device */
 static int close(struct inode *node, struct file *filep)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-
-	atomic_dec(&ir->open_count);
-
-	put_ir_device(ir, false);
 	return 0;
 }
 
-static int ir_remove(struct i2c_client *client);
 static int ir_probe(struct i2c_client *client, const struct
 i2c_device_id *id);
 
-#define ID_FLAG_TX	0x01
-#define ID_FLAG_HDPVR	0x02
+#define ID_FLAG_HDPVR	0x01
 
 static const struct i2c_device_id ir_transceiver_id[] = {
-	{ "ir_tx_z8f0811_haup",  ID_FLAG_TX                 },
-	{ "ir_rx_z8f0811_haup",  0                          },
-	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR | ID_FLAG_TX },
-	{ "ir_rx_z8f0811_hdpvr", ID_FLAG_HDPVR              },
+	{ "ir_tx_z8f0811_haup",  0 },
+	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR },
 	{ }

};
MODULE_DEVICE_TABLE(i2c, ir_transceiver_id);

drivers/staging/media/lirc/lirc_zilog.c +0 -47
@@ -1329,16 +778,13 @@ static struct i2c_driver driver = {
 		.name	= "Zilog/Hauppauge i2c IR",
 	},
 	.probe		= ir_probe,
-	.remove		= ir_remove,
 	.id_table	= ir_transceiver_id,
 };
 
 static const struct file_operations lirc_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.read		= read,
 	.write		= write,
-	.poll		= poll,
 	.unlocked_ioctl	= ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ioctl,
@@ -1347,55 +793,11 @@ static const struct file_operations lirc_fops
 = {
 	.release	= close
 };
 
-static int ir_remove(struct i2c_client *client)
-{
-	if (strncmp("ir_tx_z8", client->name, 8) == 0) {
-		struct IR_tx *tx = i2c_get_clientdata(client);
-
-		if (tx) {
-			mutex_lock(&tx->client_lock);
-			tx->c = NULL;
-			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
-		}
-	} else if (strncmp("ir_rx_z8", client->name, 8) == 0) {
-		struct IR_rx *rx = i2c_get_clientdata(client);
-
-		if (rx) {
-			mutex_lock(&rx->client_lock);
-			rx->c = NULL;
-			mutex_unlock(&rx->client_lock);
-			put_ir_rx(rx, false);
-		}
-	}
-	return 0;
-}
-
-/* ir_devices_lock must be held */
-static struct IR *get_ir_device_by_adapter(struct i2c_adapter
 *adapter)
-{
-	struct IR *ir;
-
-	if (list_empty(&ir_devices_list))
-		return NULL;
-
-	list_for_each_entry(ir, &ir_devices_list, list)
-		if (ir->adapter == adapter) {
-			get_ir_device(ir, true);
-			return ir;
-		}
-
-	return NULL;
-}
-
 static int ir_probe(struct i2c_client *client, const struct
 i2c_device_id *id)
 {
-	struct IR *ir;
 	struct IR_tx *tx;
-	struct IR_rx *rx;
 	struct i2c_adapter *adap = client->adapter;
 	int ret;
-	bool tx_probe = false;

dev_dbg(&client->dev, "%s: %s on i2c-%d (%s), client
addr=0x%02x\n",
__func__, id->name, adap->nr, adap->name, client-

Quoted 1 line

addr);

drivers/staging/media/lirc/lirc_zilog.c +0 -11
@@ -1405,209 +807,61 @@ static int ir_probe(struct i2c_client
 *client, const struct i2c_device_id *id)
 	 * The IR transmitter is at i2c address 0x70.
 	 */
 
-	if (id->driver_data & ID_FLAG_TX)
-		tx_probe = true;
-	else if (tx_only) /* module option */
-		return -ENXIO;
-
-	pr_info("probing IR %s on %s (i2c-%d)\n",
-		tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-
-	mutex_lock(&ir_devices_lock);
-
-	/* Use a single struct IR instance for both the Rx and Tx

functions */

drivers/staging/media/lirc/lirc_zilog.c +0 -10
-	ir = get_ir_device_by_adapter(adap);
-	if (!ir) {
-		ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-		if (!ir) {
-			ret = -ENOMEM;
-			goto out_no_ir;
-		}
-		kref_init(&ir->ref);
-
-		/* store for use in ir_probe() again, and open()

later on */

drivers/staging/media/lirc/lirc_zilog.c +0 -18
-		INIT_LIST_HEAD(&ir->list);
-		list_add_tail(&ir->list, &ir_devices_list);
-
-		ir->adapter = adap;
-		ir->dev = &adap->dev;
-		mutex_init(&ir->ir_lock);
-		atomic_set(&ir->open_count, 0);
-		spin_lock_init(&ir->tx_ref_lock);
-		spin_lock_init(&ir->rx_ref_lock);
-
-		/* set lirc_dev stuff */
-		ir->l = lirc_allocate_device();
-		if (!ir->l) {
-			ret = -ENOMEM;
-			goto out_put_ir;
-		}
-
-		snprintf(ir->l->name, sizeof(ir->l->name),

"lirc_zilog");

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-		ir->l->code_length = 13;
-		ir->l->fops = &lirc_fops;
-		ir->l->owner = THIS_MODULE;
-		ir->l->dev.parent = &adap->dev;
-
-		/*
-		 * FIXME this is a pointer reference to us, but no

refcount.

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-		 *
-		 * This OK for now, since lirc_dev currently won't

touch this

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 * buffer as we provide our own lirc_fops.
-		 *
-		 * Currently our own lirc_fops rely on this ir->l-
Quoted 1 line

buf pointer

drivers/staging/media/lirc/lirc_zilog.c +1 -11
-		 */
-		ir->l->buf = &ir->rbuf;
-		/* This will be returned by lirc_get_pdata() */
-		ir->l->data = ir;
-		ret = lirc_buffer_init(ir->l->buf, 2, BUFLEN / 2);
-		if (ret) {
-			lirc_free_device(ir->l);
-			ir->l = NULL;
-			goto out_put_ir;
-		}
-	}
+	pr_info("probing IR Tx on %s (i2c-%d)\n", adap->name, adap-
Quoted 1 line

nr);

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-	if (tx_probe) {
-		/* Get the IR_rx instance for later, if already

allocated */

drivers/staging/media/lirc/lirc_zilog.c +0 -17
-		rx = get_ir_rx(ir);
-
-		/* Set up a struct IR_tx instance */
-		tx = kzalloc(sizeof(*tx), GFP_KERNEL);
-		if (!tx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&tx->ref);
-		ir->tx = tx;
-
-		ir->l->features |= LIRC_CAN_SEND_LIRCCODE;
-		mutex_init(&tx->client_lock);
-		tx->c = client;
-		tx->need_boot = 1;
-		tx->post_tx_ready_poll =
-			       (id->driver_data & ID_FLAG_HDPVR) ?

false : true;

drivers/staging/media/lirc/lirc_zilog.c +0 -9
-
-		/* An ir ref goes to the struct IR_tx instance */
-		tx->ir = get_ir_device(ir, true);
-
-		/* A tx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_tx(ir));
-
-		/*
-		 * Load the 'firmware'.  We do this before

registering with

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * lirc_dev, so the first firmware load attempt does

not happen

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 * after a open() or write() call on the device.
-		 *
-		 * Failure here is not deemed catastrophic, so the

receiver will

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * still be usable.  Firmware load will be retried

in write(),

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-		 * if it is needed.
-		 */
-		fw_load(tx);
-
-		/* Proceed only if the Rx client is also ready or

not needed */

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		if (!rx && !tx_only) {
-			dev_info(tx->ir->dev,
-				 "probe of IR Tx on %s (i2c-%d)

done. Waiting on IR Rx.\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				 adap->name, adap->nr);
-			goto out_ok;
-		}
-	} else {
-		/* Get the IR_tx instance for later, if already

allocated */

drivers/staging/media/lirc/lirc_zilog.c +0 -16
-		tx = get_ir_tx(ir);
-
-		/* Set up a struct IR_rx instance */
-		rx = kzalloc(sizeof(*rx), GFP_KERNEL);
-		if (!rx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&rx->ref);
-		ir->rx = rx;
-
-		ir->l->features |= LIRC_CAN_REC_LIRCCODE;
-		mutex_init(&rx->client_lock);
-		rx->c = client;
-		rx->hdpvr_data_fmt =
-			       (id->driver_data & ID_FLAG_HDPVR) ?

true : false;

drivers/staging/media/lirc/lirc_zilog.c +8 -8
-
-		/* An ir ref goes to the struct IR_rx instance */
-		rx->ir = get_ir_device(ir, true);
+	/* Set up a struct IR_tx instance */
+	tx = devm_kzalloc(&client->dev, sizeof(*tx), GFP_KERNEL);
+	if (!tx)
+		return -ENOMEM;
 
-		/* An rx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_rx(ir));
+	mutex_init(&tx->client_lock);
+	tx->c = client;
+	tx->need_boot = 1;
+	tx->post_tx_ready_poll = !(id->driver_data & ID_FLAG_HDPVR);
 
-		/*
-		 * Start the polling thread.
-		 * It will only perform an empty loop around

schedule_timeout()

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * until we register with lirc_dev and the first

user open()

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 */
-		/* An ir ref goes to the new rx polling kthread */
-		rx->task = kthread_run(lirc_thread,

get_ir_device(ir, true),

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				       "zilog-rx-i2c-%d", adap->nr);
-		if (IS_ERR(rx->task)) {
-			ret = PTR_ERR(rx->task);
-			dev_err(tx->ir->dev,
-				"%s: could not start IR Rx polling

thread\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-				__func__);
-			/* Failed kthread, so put back the ir ref */
-			put_ir_device(ir, true);
-			/* Failure exit, so put back rx ref from

i2c_client */

drivers/staging/media/lirc/lirc_zilog.c +4 -8
-			i2c_set_clientdata(client, NULL);
-			put_ir_rx(rx, true);
-			ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-			goto out_put_tx;
-		}
+	/* set lirc_dev stuff */
+	tx->l = lirc_allocate_device();
+	if (!tx->l)
+		return -ENOMEM;
 
-		/* Proceed only if the Tx client is also ready */
-		if (!tx) {
-			pr_info("probe of IR Rx on %s (i2c-%d) done.

Waiting on IR Tx.\n",

drivers/staging/media/lirc/lirc_zilog.c +8 -7
-				adap->name, adap->nr);
-			goto out_ok;
-		}
-	}
+	snprintf(tx->l->name, sizeof(tx->l->name), "lirc_zilog");
+	tx->l->features |= LIRC_CAN_SEND_LIRCCODE;
+	tx->l->code_length = 13;
+	tx->l->fops = &lirc_fops;
+	tx->l->owner = THIS_MODULE;
+	tx->l->dev.parent = &client->dev;
 
 	/* register with lirc */
-	ret = lirc_register_device(ir->l);
+	ret = lirc_register_device(tx->l);
 	if (ret < 0) {
-		dev_err(tx->ir->dev,
-			"%s: lirc_register_device() failed: %i\n",
+		dev_err(&tx->l->dev, "%s: lirc_register_device()

failed: %i\n",

drivers/staging/media/lirc/lirc_zilog.c +6 -4
 			__func__, ret);
-		lirc_free_device(ir->l);
-		ir->l = NULL;
-		goto out_put_xx;
+		lirc_free_device(tx->l);
+		tx->l = NULL;
+		return ret;
 	}
 
-	dev_info(ir->dev,
+	/*
+	 * Load the 'firmware'.  We do this before registering with
+	 * lirc_dev, so the first firmware load attempt does not

happen

drivers/staging/media/lirc/lirc_zilog.c +12 -0
+	 * after a open() or write() call on the device.
+	 */
+	ret = fw_load(tx);
+	if (ret < 0) {
+		lirc_unregister_device(tx->l);
+		return ret;
+	}
+
+	/* A tx ref goes to the i2c_client */
+	i2c_set_clientdata(client, tx);
+
+	dev_info(&tx->l->dev,
 		 "IR unit on %s (i2c-%d) registered as lirc%d and

ready\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -25
-		 adap->name, adap->nr, ir->l->minor);
-
-out_ok:
-	if (rx)
-		put_ir_rx(rx, true);
-	if (tx)
-		put_ir_tx(tx, true);
-	put_ir_device(ir, true);
-	dev_info(ir->dev,
-		 "probe of IR %s on %s (i2c-%d) done\n",
-		 tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-	mutex_unlock(&ir_devices_lock);
-	return 0;
+		 adap->name, adap->nr, tx->l->minor);
 
-out_put_xx:
-	if (rx)
-		put_ir_rx(rx, true);
-out_put_tx:
-	if (tx)
-		put_ir_tx(tx, true);
-out_put_ir:
-	put_ir_device(ir, true);
-out_no_ir:
-	dev_err(&client->dev,
-		"%s: probing IR %s on %s (i2c-%d) failed with %d\n",
-		__func__, tx_probe ? "Tx" : "Rx", adap->name, adap-
Quoted 1 line

nr, ret);

drivers/staging/media/lirc/lirc_zilog.c +2 -2
-	mutex_unlock(&ir_devices_lock);
-	return ret;
+	dev_info(&tx->l->dev,
+		 "probe of IR Tx on %s (i2c-%d) done\n", adap->name, 

adap->nr);

drivers/staging/media/lirc/lirc_zilog.c +1 -3
+	return 0;
 }
 
 static int __init zilog_init(void)
@@ -1648,6 +902,3 @@ MODULE_ALIAS("lirc_pvr150");
 
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Enable debugging messages");
-
-module_param(tx_only, bool, 0644);
-MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function");
#7 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

Quoted 1,445 lines · Sean Young
Quoted 6 lines · Andy Walls
Quoted 1 line · Sean Young

The ir-kbd-i2c module already handles this very well.

Hi Sean:

It's been years, but my recollection is that although ir-kdb-i2c

might

Quoted 1 line

handle receive well, but since the 4 i2c addresses (1 Rx, 1 Tx, 1 IR

Tx

Quoted 2 lines

code learning, 1 custom Tx code) are all handled by the same Zilog microcontroller internally, that splitting the Rx and Tx

functionality

Quoted 7 lines

between two modules became problematic.

Believe me, if i could have leveraged ir-kdb-i2c back when I ported this, I would have. I think it's a very bad idea to remove the receiver from lirc_zilog.

The cx18 and ivtv drivers both use lirc_zilog IIRC. Have you looked

at

Quoted 3 lines

the changes required to have the first I2C address used by one i2c module, and the next one (or three) I2C addresses used by another i2c module?

This is already the case.

In current kernels you can use ir-kbd-i2c for Rx and lirc_zilog for Tx, this works fine. In fact, the lirc_zilog Rx code produces lirccodes, (not mode2) and ir-kbd-i2c produces keycodes through rc-core, so ir-kbd-i2c
(also mainline, not staging) is much more likely to be used for Rx. For Tx
you have to use lirc_zilog.

I haven't heard of any reports of problems (or observed this myself) when
using these two modules together.

As you point out, both drivers sending i2c commands to the same z8f0811

with its z8 encore hand-coded i2c implementation. But they're using different
addresses.

So removing the lirc_zilog Rx doesn't make things worse, in fact, it just
removes some code which is unlikely to be used.

It's the hdpvr, ivtv, cx18 and pvrusb2 drivers which have a Tx interface. I
have hdpvr and ivtv hardware to test.

Sean

Quoted 8 lines

-Andy

Quoted 4 lines
---
 drivers/staging/media/lirc/lirc_zilog.c | 901

+++-------------------

Quoted 398 lines
Quoted 398 lines

----------

 1 file changed, 76 insertions(+), 825 deletions(-)
drivers/staging/media/lirc/lirc_zilog.c +0 -77
index 6bd0717bf76e..757b3fc247ac 100644
@@ -64,28 +64,7 @@
 /* Max transfer size done by I2C transfer functions */
 #define MAX_XFER_SIZE  64
 
-struct IR;
-
-struct IR_rx {
-	struct kref ref;
-	struct IR *ir;
-
-	/* RX device */
-	struct mutex client_lock;
-	struct i2c_client *c;
-
-	/* RX polling thread data */
-	struct task_struct *task;
-
-	/* RX read data */
-	unsigned char b[3];
-	bool hdpvr_data_fmt;
-};
-
 struct IR_tx {
-	struct kref ref;
-	struct IR *ir;
-
 	/* TX device */
 	struct mutex client_lock;
 	struct i2c_client *c;
@@ -93,39 +72,9 @@ struct IR_tx {
 	/* TX additional actions needed */
 	int need_boot;
 	bool post_tx_ready_poll;
-};
-
-struct IR {
-	struct kref ref;
-	struct list_head list;
-
-	/* FIXME spinlock access to l->features */
 	struct lirc_dev *l;
-	struct lirc_buffer rbuf;
-
-	struct mutex ir_lock;
-	atomic_t open_count;
-
-	struct device *dev;
-	struct i2c_adapter *adapter;
-
-	spinlock_t rx_ref_lock; /* struct IR_rx kref get()/put() */
-	struct IR_rx *rx;
-
-	spinlock_t tx_ref_lock; /* struct IR_tx kref get()/put() */
-	struct IR_tx *tx;
 };
 
-/* IR transceiver instance object list */
-/*
- * This lock is used for the following:
- * a. ir_devices_list access, insertions, deletions
- * b. struct IR kref get()s and put()s
- * c. serialization of ir_probe() for the two i2c_clients for a Z8
- */
-static DEFINE_MUTEX(ir_devices_lock);
-static LIST_HEAD(ir_devices_list);
-
 /* Block size for IR transmitter */
 #define TX_BLOCK_SIZE	99
 
@@ -153,348 +102,8 @@ struct tx_data_struct {
 static struct tx_data_struct *tx_data;
 static struct mutex tx_data_lock;
 
-
 /* module parameters */
 static bool debug;	/* debug output */
-static bool tx_only;	/* only handle the IR Tx function */
-
-
-/* struct IR reference counting */
-static struct IR *get_ir_device(struct IR *ir, bool
 ir_devices_lock_held)
-{
-	if (ir_devices_lock_held) {
-		kref_get(&ir->ref);
-	} else {
-		mutex_lock(&ir_devices_lock);
-		kref_get(&ir->ref);
-		mutex_unlock(&ir_devices_lock);
-	}
-	return ir;
-}
-
-static void release_ir_device(struct kref *ref)
-{
-	struct IR *ir = container_of(ref, struct IR, ref);
-
-	/*
-	 * Things should be in this state by now:
-	 * ir->rx set to NULL and deallocated - happens before ir-
 >rx->ir put()
-	 * ir->rx->task kthread stopped - happens before ir->rx->ir
 put()
-	 * ir->tx set to NULL and deallocated - happens before ir-
Quoted 1 line

tx->ir put()

drivers/staging/media/lirc/lirc_zilog.c +0 -40
-	 * ir->open_count ==  0 - happens on final close()
-	 * ir_lock, tx_ref_lock, rx_ref_lock, all released
-	 */
-	if (ir->l)
-		lirc_unregister_device(ir->l);
-
-	if (kfifo_initialized(&ir->rbuf.fifo))
-		lirc_buffer_free(&ir->rbuf);
-	list_del(&ir->list);
-	kfree(ir);
-}
-
-static int put_ir_device(struct IR *ir, bool ir_devices_lock_held)
-{
-	int released;
-
-	if (ir_devices_lock_held)
-		return kref_put(&ir->ref, release_ir_device);
-
-	mutex_lock(&ir_devices_lock);
-	released = kref_put(&ir->ref, release_ir_device);
-	mutex_unlock(&ir_devices_lock);
-
-	return released;
-}
-
-/* struct IR_rx reference counting */
-static struct IR_rx *get_ir_rx(struct IR *ir)
-{
-	struct IR_rx *rx;
-
-	spin_lock(&ir->rx_ref_lock);
-	rx = ir->rx;
-	if (rx)
-		kref_get(&rx->ref);
-	spin_unlock(&ir->rx_ref_lock);
-	return rx;
-}
-
-static void destroy_rx_kthread(struct IR_rx *rx, bool

ir_devices_lock_held)

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-{
-	/* end up polling thread */
-	if (!IS_ERR_OR_NULL(rx->task)) {
-		kthread_stop(rx->task);
-		rx->task = NULL;
-		/* Put the ir ptr that ir_probe() gave to the rx

poll thread */

drivers/staging/media/lirc/lirc_zilog.c +0 -12
-		put_ir_device(rx->ir, ir_devices_lock_held);
-	}
-}
-
-static void release_ir_rx(struct kref *ref)
-{
-	struct IR_rx *rx = container_of(ref, struct IR_rx, ref);
-	struct IR *ir = rx->ir;
-
-	/*
-	 * This release function can't do all the work, as we want
-	 * to keep the rx_ref_lock a spinlock, and killing the poll

thread

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-	 * and releasing the ir reference can cause a sleep.  That

work is

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-	 * performed by put_ir_rx()
-	 */
-	ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-	/* Don't put_ir_device(rx->ir) here; lock can't be freed yet

*/

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-	ir->rx = NULL;
-	/* Don't do the kfree(rx) here; we still need to kill the

poll thread */

drivers/staging/media/lirc/lirc_zilog.c +0 -15
-}
-
-static int put_ir_rx(struct IR_rx *rx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = rx->ir;
-
-	spin_lock(&ir->rx_ref_lock);
-	released = kref_put(&rx->ref, release_ir_rx);
-	spin_unlock(&ir->rx_ref_lock);
-	/* Destroy the rx kthread while not holding the spinlock */
-	if (released) {
-		destroy_rx_kthread(rx, ir_devices_lock_held);
-		kfree(rx);
-		/* Make sure we're not still in a poll_table

somewhere */

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		wake_up_interruptible(&ir->rbuf.wait_poll);
-	}
-	/* Do a reference put() for the rx->ir reference, if we

released rx */

drivers/staging/media/lirc/lirc_zilog.c +0 -25
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-/* struct IR_tx reference counting */
-static struct IR_tx *get_ir_tx(struct IR *ir)
-{
-	struct IR_tx *tx;
-
-	spin_lock(&ir->tx_ref_lock);
-	tx = ir->tx;
-	if (tx)
-		kref_get(&tx->ref);
-	spin_unlock(&ir->tx_ref_lock);
-	return tx;
-}
-
-static void release_ir_tx(struct kref *ref)
-{
-	struct IR_tx *tx = container_of(ref, struct IR_tx, ref);
-	struct IR *ir = tx->ir;
-
-	ir->l->features &= ~LIRC_CAN_SEND_LIRCCODE;
-	/* Don't put_ir_device(tx->ir) here, so our lock doesn't get

freed */

drivers/staging/media/lirc/lirc_zilog.c +0 -13
-	ir->tx = NULL;
-	kfree(tx);
-}
-
-static int put_ir_tx(struct IR_tx *tx, bool ir_devices_lock_held)
-{
-	int released;
-	struct IR *ir = tx->ir;
-
-	spin_lock(&ir->tx_ref_lock);
-	released = kref_put(&tx->ref, release_ir_tx);
-	spin_unlock(&ir->tx_ref_lock);
-	/* Do a reference put() for the tx->ir reference, if we

released tx */

drivers/staging/media/lirc/lirc_zilog.c +0 -28
-	if (released)
-		put_ir_device(ir, ir_devices_lock_held);
-	return released;
-}
-
-static int add_to_buf(struct IR *ir)
-{
-	__u16 code;
-	unsigned char codes[2];
-	unsigned char keybuf[6];
-	int got_data = 0;
-	int ret;
-	int failures = 0;
-	unsigned char sendbuf[1] = { 0 };
-	struct lirc_buffer *rbuf = ir->l->buf;
-	struct IR_rx *rx;
-	struct IR_tx *tx;
-
-	if (lirc_buffer_full(rbuf)) {
-		dev_dbg(ir->dev, "buffer overflow\n");
-		return -EOVERFLOW;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/* Ensure our rx->c i2c_client remains valid for the

duration */

drivers/staging/media/lirc/lirc_zilog.c +0 -21
-	mutex_lock(&rx->client_lock);
-	if (!rx->c) {
-		mutex_unlock(&rx->client_lock);
-		put_ir_rx(rx, false);
-		return -ENXIO;
-	}
-
-	tx = get_ir_tx(ir);
-
-	/*
-	 * service the device as long as it is returning
-	 * data and we have space
-	 */
-	do {
-		if (kthread_should_stop()) {
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Lock i2c bus for the duration.  RX/TX chips

interfere so

drivers/staging/media/lirc/lirc_zilog.c +0 -12
-		 * this is worth it
-		 */
-		mutex_lock(&ir->ir_lock);
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-
-		/*
-		 * Send random "poll command" (?)  Windows driver

does this

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-		 * and it is a good point to detect chip failure.
-		 */
-		ret = i2c_master_send(rx->c, sendbuf, 1);
-		if (ret != 1) {
-			dev_err(ir->dev, "i2c_master_send failed

with %d\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				ret);
-			if (failures >= 3) {
-				mutex_unlock(&ir->ir_lock);
-				dev_err(ir->dev,
-					"unable to read from the IR

chip after 3 resets, giving up\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-				break;
-			}
-
-			/* Looks like the chip crashed, reset it */
-			dev_err(ir->dev,
-				"polling the IR receiver chip

failed, trying reset\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -23
-
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			if (kthread_should_stop()) {
-				mutex_unlock(&ir->ir_lock);
-				ret = -ENODATA;
-				break;
-			}
-			schedule_timeout((100 * HZ + 999) / 1000);
-			if (tx)
-				tx->need_boot = 1;
-
-			++failures;
-			mutex_unlock(&ir->ir_lock);
-			ret = 0;
-			continue;
-		}
-
-		if (kthread_should_stop()) {
-			mutex_unlock(&ir->ir_lock);
-			ret = -ENODATA;
-			break;
-		}
-		ret = i2c_master_recv(rx->c, keybuf,

sizeof(keybuf));

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-		mutex_unlock(&ir->ir_lock);
-		if (ret != sizeof(keybuf)) {
-			dev_err(ir->dev,
-				"i2c_master_recv failed with %d --

keeping last read buffer\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -16
-				ret);
-		} else {
-			rx->b[0] = keybuf[3];
-			rx->b[1] = keybuf[4];
-			rx->b[2] = keybuf[5];
-			dev_dbg(ir->dev,
-				"key (0x%02x/0x%02x)\n",
-				rx->b[0], rx->b[1]);
-		}
-
-		/* key pressed ? */
-		if (rx->hdpvr_data_fmt) {
-			if (got_data && (keybuf[0] == 0x80)) {
-				ret = 0;
-				break;
-			} else if (got_data && (keybuf[0] == 0x00))

{

drivers/staging/media/lirc/lirc_zilog.c +0 -10
-				ret = -ENODATA;
-				break;
-			}
-		} else if ((rx->b[0] & 0x80) == 0) {
-			ret = got_data ? 0 : -ENODATA;
-			break;
-		}
-
-		/* look what we have */
-		code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1]
Quoted 1 line
Quoted 1 line

2);

drivers/staging/media/lirc/lirc_zilog.c +0 -14
-
-		codes[0] = (code >> 8) & 0xff;
-		codes[1] = code & 0xff;
-
-		/* return it */
-		lirc_buffer_write(rbuf, codes);
-		++got_data;
-		ret = 0;
-	} while (!lirc_buffer_full(rbuf));
-
-	mutex_unlock(&rx->client_lock);
-	if (tx)
-		put_ir_tx(tx, false);
-	put_ir_rx(rx, false);
Quoted 8 lines
Quoted 8 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	return ret;
-}
-
-/*
- * Main function of the polling thread -- from lirc_dev.
- * We don't fit the LIRC model at all anymore.  This is horrible,

but
- * basically we have a single RX/TX device with a nasty failure

mode

Quoted 3 lines
Quoted 3 lines

- * that needs to be accounted for across the pair. lirc lets us provide
- * fops, but prevents us from using the internal polling, etc. if

we

Quoted 166 lines
Quoted 166 lines

do
- * so. Hence the replication. Might be neater to extend the LIRC model
- * to account for this but I'd think it's a very special case of seriously
- * messed up hardware.
- */

drivers/staging/media/lirc/lirc_zilog.c +0 -11
-static int lirc_thread(void *arg)
-{
-	struct IR *ir = arg;
-	struct lirc_buffer *rbuf = ir->l->buf;
-
-	dev_dbg(ir->dev, "poll thread started\n");
-
-	while (!kthread_should_stop()) {
-		set_current_state(TASK_INTERRUPTIBLE);
-
-		/* if device not opened, we can sleep half a second

*/

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-		if (atomic_read(&ir->open_count) == 0) {
-			schedule_timeout(HZ / 2);
-			continue;
-		}
-
-		/*
-		 * This is ~113*2 + 24 + jitter (2*repeat gap + code

length).

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * We use this interval as the chip resets every

time you poll

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * it (bad!).  This is therefore just sufficient to

catch all

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * of the button presses.  It makes the remote much

more

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * responsive.  You can see the difference by

running irw and

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * holding down a button.  With 100ms, the old

polling

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * interval, you'll notice breaks in the repeat

sequence

drivers/staging/media/lirc/lirc_zilog.c +2 -14
-		 * corresponding to lost keypresses.
-		 */
-		schedule_timeout((260 * HZ) / 1000);
-		if (kthread_should_stop())
-			break;
-		if (!add_to_buf(ir))
-			wake_up_interruptible(&rbuf->wait_poll);
-	}
-
-	dev_dbg(ir->dev, "poll thread ended\n");
-	return 0;
-}
 
 /* safe read of a uint32 (always network byte order) */
 static int read_uint32(unsigned char **data,
@@ -645,10 +254,10 @@ static int send_data_block(struct IR_tx *tx,
 unsigned char *data_block)
 		buf[0] = (unsigned char)(i + 1);
 		for (j = 0; j < tosend; ++j)
 			buf[1 + j] = data_block[i + j];
-		dev_dbg(tx->ir->dev, "%*ph", 5, buf);
+		dev_dbg(&tx->l->dev, "%*ph", 5, buf);
 		ret = i2c_master_send(tx->c, buf, tosend + 1);
 		if (ret != tosend + 1) {
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"i2c_master_send failed with %d\n",
 ret);
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			return ret < 0 ? ret : -EFAULT;
 		}
@@ -673,7 +282,7 @@ static int send_boot_data(struct IR_tx *tx)
 	buf[1] = 0x20;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
drivers/staging/media/lirc/lirc_zilog.c +3 -3
 	}
@@ -690,22 +299,22 @@ static int send_boot_data(struct IR_tx *tx)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Here comes the firmware version... (hopefully) */
 	ret = i2c_master_recv(tx->c, buf, 4);
 	if (ret != 4) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return 0;
 	}
 	if ((buf[0] != 0x80) && (buf[0] != 0xa0)) {
-		dev_err(tx->ir->dev, "unexpected IR TX init
 response: %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX init
 response: %02x\n",
 			buf[0]);
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 		return 0;
 	}
-	dev_notice(tx->ir->dev,
+	dev_notice(&tx->l->dev,
 		   "Zilog/Hauppauge IR blaster firmware version

%d.%d.%d loaded\n",

drivers/staging/media/lirc/lirc_zilog.c +2 -3
 		   buf[1], buf[2], buf[3]);
@@ -750,15 +359,15 @@ static int fw_load(struct IR_tx *tx)
 	}
 
 	/* Request codeset data file */
-	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", tx-
 >ir->dev);
+	ret = request_firmware(&fw_entry, "haup-ir-blaster.bin",
 &tx->l->dev);
 	if (ret != 0) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"firmware haup-ir-blaster.bin not available
 (%d)\n",
 			ret);
 		ret = ret < 0 ? ret : -EFAULT;
 		goto out;
 	}
-	dev_dbg(tx->ir->dev, "firmware of size %zu loaded\n",

fw_entry->size);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+	dev_dbg(&tx->l->dev, "firmware of size %zu loaded\n",

fw_entry->size);

drivers/staging/media/lirc/lirc_zilog.c +1 -1
 	/* Parse the file */
 	tx_data = vmalloc(sizeof(*tx_data));
@@ -786,7 +395,7 @@ static int fw_load(struct IR_tx *tx)
 	if (!read_uint8(&data, tx_data->endp, &version))
 		goto corrupt;
 	if (version != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"unsupported code set file version (%u,
 expected 1) -- please upgrade to a newer driver\n",
 			version);
drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		fw_unload_locked();
@@ -803,7 +412,7 @@ static int fw_load(struct IR_tx *tx)
 			 &tx_data->num_code_sets))
 		goto corrupt;
 
-	dev_dbg(tx->ir->dev, "%u IR blaster codesets loaded\n",
+	dev_dbg(&tx->l->dev, "%u IR blaster codesets loaded\n",
 		tx_data->num_code_sets);
 
 	tx_data->code_sets = vmalloc(
@@ -868,7 +477,7 @@ static int fw_load(struct IR_tx *tx)
 	goto out;
 
 corrupt:
-	dev_err(tx->ir->dev, "firmware is corrupt\n");
+	dev_err(&tx->l->dev, "firmware is corrupt\n");
 	fw_unload_locked();
 	ret = -EFAULT;
 
Quoted 6 lines

drivers/staging/media/lirc/lirc_zilog.c static int fw_load(struct IR_tx *tx) · line 881

Quoted 6 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -2
@@ -877,94 +486,6 @@ static int fw_load(struct IR_tx *tx)
 	return ret;
 }
 
-/* copied from lirc_dev */
-static ssize_t read(struct file *filep, char __user *outbuf,

size_t

Quoted 145 lines
Quoted 145 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -22
 n,
-		    loff_t *ppos)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	int ret = 0, written = 0, retries = 0;
-	unsigned int m;
-	DECLARE_WAITQUEUE(wait, current);
-
-	dev_dbg(ir->dev, "read called\n");
-	if (n % rbuf->chunk_size) {
-		dev_dbg(ir->dev, "read result = -EINVAL\n");
-		return -EINVAL;
-	}
-
-	rx = get_ir_rx(ir);
-	if (!rx)
-		return -ENXIO;
-
-	/*
-	 * we add ourselves to the task queue before buffer check
-	 * to avoid losing scan code (in case when queue is awaken

somewhere

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-	 * between while condition checking and scheduling)
-	 */
-	add_wait_queue(&rbuf->wait_poll, &wait);
-	set_current_state(TASK_INTERRUPTIBLE);
-
-	/*
-	 * while we didn't provide 'length' bytes, device is opened

in blocking

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	 * mode and 'copy_to_user' is happy, wait for data.
-	 */
-	while (written < n && ret == 0) {
-		if (lirc_buffer_empty(rbuf)) {
-			/*
-			 * According to the read(2) man page,

'written' can be

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-			 * returned as less than 'n', instead of

blocking

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-			 * again, returning -EWOULDBLOCK, or

returning

drivers/staging/media/lirc/lirc_zilog.c +0 -20
-			 * -ERESTARTSYS
-			 */
-			if (written)
-				break;
-			if (filep->f_flags & O_NONBLOCK) {
-				ret = -EWOULDBLOCK;
-				break;
-			}
-			if (signal_pending(current)) {
-				ret = -ERESTARTSYS;
-				break;
-			}
-			schedule();
-			set_current_state(TASK_INTERRUPTIBLE);
-		} else {
-			unsigned char buf[MAX_XFER_SIZE];
-
-			if (rbuf->chunk_size > sizeof(buf)) {
-				dev_err(ir->dev,
-					"chunk_size is too big

(%d)!\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-					rbuf->chunk_size);
-				ret = -EINVAL;
-				break;
-			}
-			m = lirc_buffer_read(rbuf, buf);
-			if (m == rbuf->chunk_size) {
-				ret = copy_to_user(outbuf + written,

buf,

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-						   rbuf-
Quoted 1 line

chunk_size);

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-				written += rbuf->chunk_size;
-			} else {
-				retries++;
-			}
-			if (retries >= 5) {
-				dev_err(ir->dev, "Buffer read

failed!\n");

drivers/staging/media/lirc/lirc_zilog.c +0 -15
-				ret = -EIO;
-			}
-		}
-	}
-
-	remove_wait_queue(&rbuf->wait_poll, &wait);
-	put_ir_rx(rx, false);
-	set_current_state(TASK_RUNNING);
-
-	dev_dbg(ir->dev, "read result = %d (%s)\n", ret,
-		ret ? "Error" : "OK");
-
-	return ret ? ret : written;
-}
-
 /* send a keypress to the IR TX device */
 static int send_code(struct IR_tx *tx, unsigned int code, unsigned

int key)
{

drivers/staging/media/lirc/lirc_zilog.c +1 -1
@@ -976,7 +497,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	ret = get_key_data(data_block, code, key);
 
 	if (ret == -EPROTO) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"failed to get data for code %u, key %u --
 check lircd.conf entries\n",
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 			code, key);
 		return ret;
@@ -994,7 +515,7 @@ static int send_code(struct IR_tx *tx, unsigned
 int code, unsigned int key)
 	buf[1] = 0x40;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		return ret < 0 ? ret : -EFAULT;
 	}
@@ -1007,18 +528,18 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 	}
 
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}
 
 	/* Send finished download? */
 	ret = i2c_master_recv(tx->c, buf, 1);
 	if (ret != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return ret < 0 ? ret : -EFAULT;
 	}

if (buf[0] != 0xA0) {

Quoted 8 lines

drivers/staging/media/lirc/lirc_zilog.c static int send_code(struct IR_tx *tx,

Quoted 8 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		dev_err(tx->ir->dev, "unexpected IR TX response #1:

%02x\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+		dev_err(&tx->l->dev, "unexpected IR TX response #1:

%02x\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -0
 			buf[0]);
 		return -EFAULT;
 	}
@@ -1028,7 +549,7 @@ static int send_code(struct IR_tx *tx,

unsigned

Quoted 11 lines
Quoted 11 lines
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 int code, unsigned int key)
 	buf[1] = 0x80;
 	ret = i2c_master_send(tx->c, buf, 2);
 	if (ret != 2) {
-		dev_err(tx->ir->dev, "i2c_master_send failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_send failed with
 %d\n", ret);
drivers/staging/media/lirc/lirc_zilog.c +0 -0
 		return ret < 0 ? ret : -EFAULT;
 	}
Quoted 1 line

drivers/staging/media/lirc/lirc_zilog.c static int send_code(struct IR_tx *tx,

Quoted 1 line
drivers/staging/media/lirc/lirc_zilog.c +0 -0
@@ -1038,7 +559,7 @@ static int send_code(struct IR_tx *tx,

unsigned

Quoted 50 lines
Quoted 50 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -0
 int code, unsigned int key)
 	 * going to skip this whole mess and say we're done on the

HD PVR

drivers/staging/media/lirc/lirc_zilog.c +0 -1
 	 */
 	if (!tx->post_tx_ready_poll) {
-		dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code,

key);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+		dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code,

key);

drivers/staging/media/lirc/lirc_zilog.c +2 -2
 		return 0;
 	}
@@ -1054,12 +575,12 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 		ret = i2c_master_send(tx->c, buf, 1);
 		if (ret == 1)
 			break;
-		dev_dbg(tx->ir->dev,
+		dev_dbg(&tx->l->dev,
 			"NAK expected: i2c_master_send failed with
 %d (try %d)\n",
 			ret, i + 1);
 	}
 	if (ret != 1) {
-		dev_err(tx->ir->dev,
+		dev_err(&tx->l->dev,
 			"IR TX chip never got ready: last

i2c_master_send failed with %d\n",

drivers/staging/media/lirc/lirc_zilog.c +2 -2
 			ret);
 		return ret < 0 ? ret : -EFAULT;
@@ -1068,17 +589,17 @@ static int send_code(struct IR_tx *tx,
 unsigned int code, unsigned int key)
 	/* Seems to be an 'ok' response */
 	i = i2c_master_recv(tx->c, buf, 1);
 	if (i != 1) {
-		dev_err(tx->ir->dev, "i2c_master_recv failed with
 %d\n", ret);
+		dev_err(&tx->l->dev, "i2c_master_recv failed with
 %d\n", ret);
 		return -EFAULT;
 	}
 	if (buf[0] != 0x80) {
-		dev_err(tx->ir->dev, "unexpected IR TX response #2:
 %02x\n",
+		dev_err(&tx->l->dev, "unexpected IR TX response #2:
 %02x\n",
 			buf[0]);
 		return -EFAULT;
 	}
 
Quoted 7 lines

drivers/staging/media/lirc/lirc_zilog.c static int send_code(struct IR_tx *tx,

Quoted 7 lines
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 	/* Oh good, it worked */
-	dev_dbg(tx->ir->dev, "sent code %u, key %u\n", code, key);
+	dev_dbg(&tx->l->dev, "sent code %u, key %u\n", code, key);
 	return 0;
 }
@@ -1091,8 +612,7 @@ static int send_code(struct IR_tx *tx,

unsigned

Quoted 11 lines
Quoted 11 lines
drivers/staging/media/lirc/lirc_zilog.c +1 -2
 int code, unsigned int key)
 static ssize_t write(struct file *filep, const char __user *buf,
 size_t n,
 		     loff_t *ppos)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_tx *tx;
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	size_t i;

int failures = 0;

Quoted 1 line

drivers/staging/media/lirc/lirc_zilog.c static ssize_t write(struct file *filep,

Quoted 1 line
drivers/staging/media/lirc/lirc_zilog.c +0 -0
@@ -1100,31 +620,20 @@ static ssize_t write(struct file *filep,

const

Quoted 52 lines
Quoted 52 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -5
 char __user *buf, size_t n,
 	if (n % sizeof(int))
 		return -EINVAL;
 
-	/* Get a struct IR_tx reference */
-	tx = get_ir_tx(ir);
-	if (!tx)
-		return -ENXIO;
-
 	/* Ensure our tx->c i2c_client remains valid for the

duration */

drivers/staging/media/lirc/lirc_zilog.c +0 -4
 	mutex_lock(&tx->client_lock);
 	if (!tx->c) {
 		mutex_unlock(&tx->client_lock);
-		put_ir_tx(tx, false);
 		return -ENXIO;
 	}
 
-	/* Lock i2c bus for the duration */
-	mutex_lock(&ir->ir_lock);
-
 	/* Send each keypress */
 	for (i = 0; i < n;) {
 		int ret = 0;
 		int command;
 
 		if (copy_from_user(&command, buf + i,

sizeof(command))) {

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-			mutex_unlock(&ir->ir_lock);
 			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
 			return -EFAULT;
 		}
@@ -1133,9 +642,7 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 			/* Make sure we have the 'firmware' loaded,

first */

drivers/staging/media/lirc/lirc_zilog.c +0 -2
 			ret = fw_load(tx);
 			if (ret != 0) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
 				if (ret != -ENOMEM)
 					ret = -EIO;
 				return ret;
@@ -1151,9 +658,7 @@ static ssize_t write(struct file *filep, const
 char __user *buf, size_t n,
 			ret = send_code(tx, (unsigned int)command >>
 16,
 					    (unsigned int)command &
 0xFFFF);
Quoted 8 lines

drivers/staging/media/lirc/lirc_zilog.c static ssize_t write(struct file *filep,

Quoted 8 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -2
 			if (ret == -EPROTO) {
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
drivers/staging/media/lirc/lirc_zilog.c +0 -0
 				return ret;
 			}
 		}
@@ -1164,15 +669,13 @@ static ssize_t write(struct file *filep,

const

Quoted 9 lines
Quoted 9 lines
drivers/staging/media/lirc/lirc_zilog.c +1 -1
 char __user *buf, size_t n,
 		 */
 		if (ret != 0) {
 			/* Looks like the chip crashed, reset it */
-			dev_err(tx->ir->dev,
+			dev_err(&tx->l->dev,
 				"sending to the IR transmitter chip
 failed, trying reset\n");
 
Quoted 12 lines

drivers/staging/media/lirc/lirc_zilog.c static ssize_t write(struct file *filep,

Quoted 12 lines
drivers/staging/media/lirc/lirc_zilog.c +1 -3
 			if (failures >= 3) {
-				dev_err(tx->ir->dev,
+				dev_err(&tx->l->dev,
 					"unable to send to the IR
 chip after 3 resets, giving up\n");
-				mutex_unlock(&ir->ir_lock);
 				mutex_unlock(&tx->client_lock);
-				put_ir_tx(tx, false);
drivers/staging/media/lirc/lirc_zilog.c +0 -0
 				return ret;
 			}
 			set_current_state(TASK_UNINTERRUPTIBLE);
@@ -1184,60 +687,21 @@ static ssize_t write(struct file *filep,

const

Quoted 63 lines
Quoted 63 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -20
 char __user *buf, size_t n,
 		}
 	}
 
-	/* Release i2c bus */
-	mutex_unlock(&ir->ir_lock);
-
 	mutex_unlock(&tx->client_lock);
 
-	/* Give back our struct IR_tx reference */
-	put_ir_tx(tx, false);
-
 	/* All looks good */
 	return n;
 }
 
-/* copied from lirc_dev */
-static unsigned int poll(struct file *filep, poll_table *wait)
-{
-	struct IR *ir = lirc_get_pdata(filep);
-	struct IR_rx *rx;
-	struct lirc_buffer *rbuf = ir->l->buf;
-	unsigned int ret;
-
-	dev_dbg(ir->dev, "%s called\n", __func__);
-
-	rx = get_ir_rx(ir);
-	if (!rx) {
-		/*
-		 * Revisit this, if our poll function ever reports

writeable

drivers/staging/media/lirc/lirc_zilog.c +0 -8
-		 * status for Tx
-		 */
-		dev_dbg(ir->dev, "%s result = POLLERR\n", __func__);
-		return POLLERR;
-	}
-
-	/*
-	 * Add our lirc_buffer's wait_queue to the poll_table. A

wake up on

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-	 * that buffer's wait queue indicates we may have a new poll

status.

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-	 */
-	poll_wait(filep, &rbuf->wait_poll, wait);
-
-	/* Indicate what ops could happen immediately without

blocking */

drivers/staging/media/lirc/lirc_zilog.c +0 -6
-	ret = lirc_buffer_empty(rbuf) ? 0 : (POLLIN | POLLRDNORM);
-
-	dev_dbg(ir->dev, "%s result = %s\n", __func__,
-		ret ? "POLLIN|POLLRDNORM" : "none");
-	return ret;
-}
 
 static long ioctl(struct file *filep, unsigned int cmd, unsigned

long arg)
{

drivers/staging/media/lirc/lirc_zilog.c +1 -1
-	struct IR *ir = lirc_get_pdata(filep);
+	struct IR_tx *tx = lirc_get_pdata(filep);
 	unsigned long __user *uptr = (unsigned long __user *)arg;
 	int result;
 	unsigned long mode, features;
Quoted 6 lines

drivers/staging/media/lirc/lirc_zilog.c static long ioctl(struct file *filep,

Quoted 6 lines
drivers/staging/media/lirc/lirc_zilog.c +1 -1
-	features = ir->l->features;
+	features = tx->l->features;
 
 	switch (cmd) {
 	case LIRC_GET_LENGTH:
@@ -1287,13 +751,7 @@ static long ioctl(struct file *filep,

unsigned

Quoted 53 lines
Quoted 53 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -6
 int cmd, unsigned long arg)
  */
 static int open(struct inode *node, struct file *filep)
 {
-	struct IR *ir;
-
 	lirc_init_pdata(node, filep);
-	ir = lirc_get_pdata(filep);
-
-	atomic_inc(&ir->open_count);
-
 	nonseekable_open(node, filep);
 	return 0;

}

drivers/staging/media/lirc/lirc_zilog.c +3 -12
@@ -1301,25 +759,16 @@ static int open(struct inode *node, struct
 file *filep)
 /* Close the IR device */
 static int close(struct inode *node, struct file *filep)
 {
-	struct IR *ir = lirc_get_pdata(filep);
-
-	atomic_dec(&ir->open_count);
-
-	put_ir_device(ir, false);
 	return 0;
 }
 
-static int ir_remove(struct i2c_client *client);
 static int ir_probe(struct i2c_client *client, const struct
 i2c_device_id *id);
 
-#define ID_FLAG_TX	0x01
-#define ID_FLAG_HDPVR	0x02
+#define ID_FLAG_HDPVR	0x01
 
 static const struct i2c_device_id ir_transceiver_id[] = {
-	{ "ir_tx_z8f0811_haup",  ID_FLAG_TX                 },
-	{ "ir_rx_z8f0811_haup",  0                          },
-	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR | ID_FLAG_TX },
-	{ "ir_rx_z8f0811_hdpvr", ID_FLAG_HDPVR              },
+	{ "ir_tx_z8f0811_haup",  0 },
+	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR },
 	{ }

};
MODULE_DEVICE_TABLE(i2c, ir_transceiver_id);

drivers/staging/media/lirc/lirc_zilog.c +0 -1
@@ -1329,16 +778,13 @@ static struct i2c_driver driver = {
 		.name	= "Zilog/Hauppauge i2c IR",
 	},
 	.probe		= ir_probe,
-	.remove		= ir_remove,
 	.id_table	= ir_transceiver_id,
 };
 
Quoted 10 lines

drivers/staging/media/lirc/lirc_zilog.c static const struct file_operations

Quoted 10 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -2
 static const struct file_operations lirc_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
-	.read		= read,
 	.write		= write,
-	.poll		= poll,
 	.unlocked_ioctl	= ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ioctl,
@@ -1347,55 +793,11 @@ static const struct file_operations

lirc_fops

Quoted 341 lines
Quoted 341 lines
drivers/staging/media/lirc/lirc_zilog.c +0 -44
 = {
 	.release	= close
 };
 
-static int ir_remove(struct i2c_client *client)
-{
-	if (strncmp("ir_tx_z8", client->name, 8) == 0) {
-		struct IR_tx *tx = i2c_get_clientdata(client);
-
-		if (tx) {
-			mutex_lock(&tx->client_lock);
-			tx->c = NULL;
-			mutex_unlock(&tx->client_lock);
-			put_ir_tx(tx, false);
-		}
-	} else if (strncmp("ir_rx_z8", client->name, 8) == 0) {
-		struct IR_rx *rx = i2c_get_clientdata(client);
-
-		if (rx) {
-			mutex_lock(&rx->client_lock);
-			rx->c = NULL;
-			mutex_unlock(&rx->client_lock);
-			put_ir_rx(rx, false);
-		}
-	}
-	return 0;
-}
-
-/* ir_devices_lock must be held */
-static struct IR *get_ir_device_by_adapter(struct i2c_adapter
 *adapter)
-{
-	struct IR *ir;
-
-	if (list_empty(&ir_devices_list))
-		return NULL;
-
-	list_for_each_entry(ir, &ir_devices_list, list)
-		if (ir->adapter == adapter) {
-			get_ir_device(ir, true);
-			return ir;
-		}
-
-	return NULL;
-}
-
 static int ir_probe(struct i2c_client *client, const struct
 i2c_device_id *id)
 {
-	struct IR *ir;
 	struct IR_tx *tx;
-	struct IR_rx *rx;
 	struct i2c_adapter *adap = client->adapter;
 	int ret;
-	bool tx_probe = false;

dev_dbg(&client->dev, "%s: %s on i2c-%d (%s), client
addr=0x%02x\n",
__func__, id->name, adap->nr, adap->name, client-

Quoted 1 line

addr);

drivers/staging/media/lirc/lirc_zilog.c +0 -11
@@ -1405,209 +807,61 @@ static int ir_probe(struct i2c_client
 *client, const struct i2c_device_id *id)
 	 * The IR transmitter is at i2c address 0x70.
 	 */
 
-	if (id->driver_data & ID_FLAG_TX)
-		tx_probe = true;
-	else if (tx_only) /* module option */
-		return -ENXIO;
-
-	pr_info("probing IR %s on %s (i2c-%d)\n",
-		tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-
-	mutex_lock(&ir_devices_lock);
-
-	/* Use a single struct IR instance for both the Rx and Tx

functions */

drivers/staging/media/lirc/lirc_zilog.c +0 -10
-	ir = get_ir_device_by_adapter(adap);
-	if (!ir) {
-		ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-		if (!ir) {
-			ret = -ENOMEM;
-			goto out_no_ir;
-		}
-		kref_init(&ir->ref);
-
-		/* store for use in ir_probe() again, and open()

later on */

drivers/staging/media/lirc/lirc_zilog.c +0 -18
-		INIT_LIST_HEAD(&ir->list);
-		list_add_tail(&ir->list, &ir_devices_list);
-
-		ir->adapter = adap;
-		ir->dev = &adap->dev;
-		mutex_init(&ir->ir_lock);
-		atomic_set(&ir->open_count, 0);
-		spin_lock_init(&ir->tx_ref_lock);
-		spin_lock_init(&ir->rx_ref_lock);
-
-		/* set lirc_dev stuff */
-		ir->l = lirc_allocate_device();
-		if (!ir->l) {
-			ret = -ENOMEM;
-			goto out_put_ir;
-		}
-
-		snprintf(ir->l->name, sizeof(ir->l->name),

"lirc_zilog");

drivers/staging/media/lirc/lirc_zilog.c +0 -7
-		ir->l->code_length = 13;
-		ir->l->fops = &lirc_fops;
-		ir->l->owner = THIS_MODULE;
-		ir->l->dev.parent = &adap->dev;
-
-		/*
-		 * FIXME this is a pointer reference to us, but no

refcount.

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-		 *
-		 * This OK for now, since lirc_dev currently won't

touch this

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 * buffer as we provide our own lirc_fops.
-		 *
-		 * Currently our own lirc_fops rely on this ir->l-
Quoted 1 line

buf pointer

drivers/staging/media/lirc/lirc_zilog.c +1 -11
-		 */
-		ir->l->buf = &ir->rbuf;
-		/* This will be returned by lirc_get_pdata() */
-		ir->l->data = ir;
-		ret = lirc_buffer_init(ir->l->buf, 2, BUFLEN / 2);
-		if (ret) {
-			lirc_free_device(ir->l);
-			ir->l = NULL;
-			goto out_put_ir;
-		}
-	}
+	pr_info("probing IR Tx on %s (i2c-%d)\n", adap->name, adap-
Quoted 1 line

nr);

drivers/staging/media/lirc/lirc_zilog.c +0 -2
-	if (tx_probe) {
-		/* Get the IR_rx instance for later, if already

allocated */

drivers/staging/media/lirc/lirc_zilog.c +0 -17
-		rx = get_ir_rx(ir);
-
-		/* Set up a struct IR_tx instance */
-		tx = kzalloc(sizeof(*tx), GFP_KERNEL);
-		if (!tx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&tx->ref);
-		ir->tx = tx;
-
-		ir->l->features |= LIRC_CAN_SEND_LIRCCODE;
-		mutex_init(&tx->client_lock);
-		tx->c = client;
-		tx->need_boot = 1;
-		tx->post_tx_ready_poll =
-			       (id->driver_data & ID_FLAG_HDPVR) ?

false : true;

drivers/staging/media/lirc/lirc_zilog.c +0 -9
-
-		/* An ir ref goes to the struct IR_tx instance */
-		tx->ir = get_ir_device(ir, true);
-
-		/* A tx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_tx(ir));
-
-		/*
-		 * Load the 'firmware'.  We do this before

registering with

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * lirc_dev, so the first firmware load attempt does

not happen

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 * after a open() or write() call on the device.
-		 *
-		 * Failure here is not deemed catastrophic, so the

receiver will

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * still be usable.  Firmware load will be retried

in write(),

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-		 * if it is needed.
-		 */
-		fw_load(tx);
-
-		/* Proceed only if the Rx client is also ready or

not needed */

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		if (!rx && !tx_only) {
-			dev_info(tx->ir->dev,
-				 "probe of IR Tx on %s (i2c-%d)

done. Waiting on IR Rx.\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				 adap->name, adap->nr);
-			goto out_ok;
-		}
-	} else {
-		/* Get the IR_tx instance for later, if already

allocated */

drivers/staging/media/lirc/lirc_zilog.c +0 -16
-		tx = get_ir_tx(ir);
-
-		/* Set up a struct IR_rx instance */
-		rx = kzalloc(sizeof(*rx), GFP_KERNEL);
-		if (!rx) {
-			ret = -ENOMEM;
-			goto out_put_xx;
-		}
-		kref_init(&rx->ref);
-		ir->rx = rx;
-
-		ir->l->features |= LIRC_CAN_REC_LIRCCODE;
-		mutex_init(&rx->client_lock);
-		rx->c = client;
-		rx->hdpvr_data_fmt =
-			       (id->driver_data & ID_FLAG_HDPVR) ?

true : false;

drivers/staging/media/lirc/lirc_zilog.c +8 -8
-
-		/* An ir ref goes to the struct IR_rx instance */
-		rx->ir = get_ir_device(ir, true);
+	/* Set up a struct IR_tx instance */
+	tx = devm_kzalloc(&client->dev, sizeof(*tx), GFP_KERNEL);
+	if (!tx)
+		return -ENOMEM;
 
-		/* An rx ref goes to the i2c_client */
-		i2c_set_clientdata(client, get_ir_rx(ir));
+	mutex_init(&tx->client_lock);
+	tx->c = client;
+	tx->need_boot = 1;
+	tx->post_tx_ready_poll = !(id->driver_data & ID_FLAG_HDPVR);
 
-		/*
-		 * Start the polling thread.
-		 * It will only perform an empty loop around

schedule_timeout()

drivers/staging/media/lirc/lirc_zilog.c +0 -1
-		 * until we register with lirc_dev and the first

user open()

drivers/staging/media/lirc/lirc_zilog.c +0 -3
-		 */
-		/* An ir ref goes to the new rx polling kthread */
-		rx->task = kthread_run(lirc_thread,

get_ir_device(ir, true),

drivers/staging/media/lirc/lirc_zilog.c +0 -5
-				       "zilog-rx-i2c-%d", adap->nr);
-		if (IS_ERR(rx->task)) {
-			ret = PTR_ERR(rx->task);
-			dev_err(tx->ir->dev,
-				"%s: could not start IR Rx polling

thread\n",

drivers/staging/media/lirc/lirc_zilog.c +0 -4
-				__func__);
-			/* Failed kthread, so put back the ir ref */
-			put_ir_device(ir, true);
-			/* Failure exit, so put back rx ref from

i2c_client */

drivers/staging/media/lirc/lirc_zilog.c +4 -8
-			i2c_set_clientdata(client, NULL);
-			put_ir_rx(rx, true);
-			ir->l->features &= ~LIRC_CAN_REC_LIRCCODE;
-			goto out_put_tx;
-		}
+	/* set lirc_dev stuff */
+	tx->l = lirc_allocate_device();
+	if (!tx->l)
+		return -ENOMEM;
 
-		/* Proceed only if the Tx client is also ready */
-		if (!tx) {
-			pr_info("probe of IR Rx on %s (i2c-%d) done.

Waiting on IR Tx.\n",

drivers/staging/media/lirc/lirc_zilog.c +8 -7
-				adap->name, adap->nr);
-			goto out_ok;
-		}
-	}
+	snprintf(tx->l->name, sizeof(tx->l->name), "lirc_zilog");
+	tx->l->features |= LIRC_CAN_SEND_LIRCCODE;
+	tx->l->code_length = 13;
+	tx->l->fops = &lirc_fops;
+	tx->l->owner = THIS_MODULE;
+	tx->l->dev.parent = &client->dev;
 
 	/* register with lirc */
-	ret = lirc_register_device(ir->l);
+	ret = lirc_register_device(tx->l);
 	if (ret < 0) {
-		dev_err(tx->ir->dev,
-			"%s: lirc_register_device() failed: %i\n",
+		dev_err(&tx->l->dev, "%s: lirc_register_device()

failed: %i\n",

drivers/staging/media/lirc/lirc_zilog.c +6 -4
 			__func__, ret);
-		lirc_free_device(ir->l);
-		ir->l = NULL;
-		goto out_put_xx;
+		lirc_free_device(tx->l);
+		tx->l = NULL;
+		return ret;
 	}
 
-	dev_info(ir->dev,
+	/*
+	 * Load the 'firmware'.  We do this before registering with
+	 * lirc_dev, so the first firmware load attempt does not

happen

drivers/staging/media/lirc/lirc_zilog.c +12 -0
+	 * after a open() or write() call on the device.
+	 */
+	ret = fw_load(tx);
+	if (ret < 0) {
+		lirc_unregister_device(tx->l);
+		return ret;
+	}
+
+	/* A tx ref goes to the i2c_client */
+	i2c_set_clientdata(client, tx);
+
+	dev_info(&tx->l->dev,
 		 "IR unit on %s (i2c-%d) registered as lirc%d and

ready\n",

drivers/staging/media/lirc/lirc_zilog.c +1 -25
-		 adap->name, adap->nr, ir->l->minor);
-
-out_ok:
-	if (rx)
-		put_ir_rx(rx, true);
-	if (tx)
-		put_ir_tx(tx, true);
-	put_ir_device(ir, true);
-	dev_info(ir->dev,
-		 "probe of IR %s on %s (i2c-%d) done\n",
-		 tx_probe ? "Tx" : "Rx", adap->name, adap->nr);
-	mutex_unlock(&ir_devices_lock);
-	return 0;
+		 adap->name, adap->nr, tx->l->minor);
 
-out_put_xx:
-	if (rx)
-		put_ir_rx(rx, true);
-out_put_tx:
-	if (tx)
-		put_ir_tx(tx, true);
-out_put_ir:
-	put_ir_device(ir, true);
-out_no_ir:
-	dev_err(&client->dev,
-		"%s: probing IR %s on %s (i2c-%d) failed with %d\n",
-		__func__, tx_probe ? "Tx" : "Rx", adap->name, adap-
Quoted 1 line

nr, ret);

drivers/staging/media/lirc/lirc_zilog.c +2 -2
-	mutex_unlock(&ir_devices_lock);
-	return ret;
+	dev_info(&tx->l->dev,
+		 "probe of IR Tx on %s (i2c-%d) done\n", adap->name, 

adap->nr);

drivers/staging/media/lirc/lirc_zilog.c +1 -0
+	return 0;
 }
Quoted 8 lines
Quoted 8 lines

drivers/staging/media/lirc/lirc_zilog.c MODULE_ALIAS("lirc_pvr150"); · line 1653

Quoted 8 lines

static int __init zilog_init(void)

drivers/staging/media/lirc/lirc_zilog.c +0 -3
@@ -1648,6 +902,3 @@ MODULE_ALIAS("lirc_pvr150");
 
 module_param(debug, bool, 0644);
 MODULE_PARM_DESC(debug, "Enable debugging messages");
-
-module_param(tx_only, bool, 0644);
-MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function");

There's an ir_lock mutex in the driver to prevent simultaneous access to the Rx and Tx functions of the z8. Accessing Rx and Tx functions of the chip together can cause it to do the wrong thing (sometimes hang?), IIRC.

I'll see if I can dig up my old disassembly of the z8's firmware to see if that interlock is strictly necessary.

Yes I know ir-kbd-i2c is in mainline, but as I said, I had reasons for avoiding it when using Tx operation of the chip. It's been 7 years, and I'm getting too old to remember the reasons. :P

-Andy

#8 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

Quoted 5 lines

There's an ir_lock mutex in the driver to prevent simultaneous access to the Rx and Tx functions of the z8. Accessing Rx and Tx functions of the chip together can cause it to do the wrong thing (sometimes hang?), IIRC.

I'll see if I can dig up my old disassembly of the z8's firmware to see if that interlock is strictly necessary.

Yes I know ir-kbd-i2c is in mainline, but as I said, I had reasons for avoiding it when using Tx operation of the chip. It's been 7 years, and I'm getting too old to remember the reasons. :P

Yeah, you definitely don't want to be issuing requests to the Rx and Tx addresses at the same time. Very bad things will happen.

Also, what is the polling interval for ir-kbd-i2c? If it's too high you can wedge the I2C bus (depending on the hardware design). Likewise, many people disable IR RX entirely (which is trivial to do with lirc_zilog through a modprobe optoin). This is because early versions of the HDPVR had issues where polling too often can interfere with traffic that configures the component receiver chip. This was improved in later versions of the design, but many people found it was just easiest to disable RX since they don't use it (i.e. they would use the blaster for controlling their STB but use a separate IR receiver).

Are you testing with video capture actively in use? If you're testing the IR interface without an active HD capture in progress you're likely to miss some of these edge cases (in particular those which would hang the encoder).

I'm not against the removal of duplicate code in general, but you have to tread carefully because there are plenty of non-obvious edge cases to consider.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
#9 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

Hi Sean and Devin:

Quoted 7 lines · Devin Heitmueller
Quoted 7 lines

There's an ir_lock mutex in the driver to prevent simultaneous access to the Rx and Tx functions of the z8. Accessing Rx and Tx functions of the chip together can cause it to do the wrong thing (sometimes hang?), IIRC.

I'll see if I can dig up my old disassembly of the z8's firmware to see if that interlock is strictly necessary.

Following up on this:

1. The I2C bus command and response buffers inside the Z8 appear to be independent and non-overlapping (ignore the garbage assembly mnemonics):

; I2C data buffer addresses

01bf srp   #%00   ; 01 00 ; Buffer pointer I2C addr E0 (70w) IR Tx  - 160 bytes
01c1 add   r0,@r0 ; 03 00 ; Buffer pointer I2C addr E1 (70r) IR Tx  -   4 bytes
01c3 add   r1,@r5 ; 03 15 ; Buffer pointer I2C addr E2 (71w) IR Rx  -   5 bytes
01c5 add   r1,@r0 ; 03 10 ; Buffer pointer I2C addr E3 (71r) IR Rx  -   5 bytes
01c7 add   r0,@r10; 03 0a ; Buffer pointer I2C addr E4 (72w) IR PB1 -   4 bytes
01c9 add   r1,@r10; 03 1a ; Buffer pointer I2C addr E5 (72r) IR PB1 -   4 bytes
01cb add   r0,@r5 ; 03 05 ; Buffer pointer I2C addr E6 (73w) IR Lrn -   1 bytes
01cd add   r0,r0  ; 02 00 ; Buffer pointer I2C addr E7 (73r) IR Lrn - 256 bytes

and the I2C handling routines appear to do the right thing in waiting for "full" buffers before operating on them.

2. Z8 Port B is used by both Tx and Rx functions, but the functions each only use 1 line of the I/O port and they use different lines.

3. Z8 Port C is unused.

4. Z8 Port A is used by both Tx functions, Rx functions, the I2C interface. If something inside the Z8 screws up the I2C bus comms with the chip, it's likely the errant misconfiguration of Port A during certain Rx and Tx operations.

5. Rx and IR Learn both use the same external hardware. Not coordinating Rx with Learn mode in the same driver, will prevent Learn operation from working. That is, if Learn mode is ever implemented. (Once upon a time, I was planning on doing that. But I have no time for that anymore.)

Quoted 20 lines
Quoted 3 lines

Yes I know ir-kbd-i2c is in mainline, but as I said, I had reasons for avoiding it when using Tx operation of the chip. It's been 7 years, and I'm getting too old to remember the reasons. :P

Yeah, you definitely don't want to be issuing requests to the Rx and Tx addresses at the same time. Very bad things will happen.

Also, what is the polling interval for ir-kbd-i2c? If it's too high you can wedge the I2C bus (depending on the hardware design). Likewise, many people disable IR RX entirely (which is trivial to do with lirc_zilog through a modprobe optoin). This is because early versions of the HDPVR had issues where polling too often can interfere
with traffic that configures the component receiver chip. This was improved in later versions of the design, but many people found it was
just easiest to disable RX since they don't use it (i.e. they would use the blaster for controlling their STB but use a separate IR receiver).

Quoted 5 lines

Are you testing with video capture actively in use? If you're testing
the IR interface without an active HD capture in progress you're likely to miss some of these edge cases (in particular those which would hang the encoder).

I'm glad someone remembers all this stuff. I'm assuming you had more pain with this than I ever did. I never owned an HD-PVR.

Regards,
Andy

Quoted 7 lines

I'm not against the removal of duplicate code in general, but you have
to tread carefully because there are plenty of non-obvious edge cases to consider.

Devin

#10 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

Hi Andy,

Quoted 5 lines

5. Rx and IR Learn both use the same external hardware. Not coordinating Rx with Learn mode in the same driver, will prevent Learn operation from working. That is, if Learn mode is ever implemented. (Once upon a time, I was planning on doing that. But I have no time for that anymore.)

There's not really any infrastructure in Linux that maps to the Zilog's "learning mode" functionality. Usually I would just tell users to do the learning under Windows and send me the resulting .ini file (which we could then add to the database).

I had planned on getting rid of the database entirely and just converting an MCE compatible pulse train to the blasting format required by the Zilog firmware (using the awesome work you sent me privately), but the fact of the matter is that nobody cares and MCEUSB devices are $20 online.

Quoted 2 lines

I'm glad someone remembers all this stuff. I'm assuming you had more pain with this than I ever did.

This would be a safe assumption. I probably put about a month's worth of engineering into driver work for the Zilog, which seems extraordinary given how simple something like an IR blaster/receiver is supposed to be. I guess that's the fun of proving out a new hardware design as opposed to just making something work under Linux that is already known to work under Windows.

Quoted 1 line

I never owned an HD-PVR.

I'm sure I have a spare or two if you really want one (not that you have the time to muck with such things nowadays). :-)

The HD-PVR was a bit of a weird case compared to devices like ivtv and cx18 because it was technically multi-master (I2C commands came both from the host and from the onboard SOC). Hence you could have weird cases where one would block the other at unexpected times. I2C commands to the Zilog would hold the bus which would delay the onboard firmware from issuing commands to the video decoder (fun timing issues). There was also some weird edge case I don't recall the details of that prompted them to add an I2C gate in later board revisions.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
author maintainer
#12 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

In reply to Devin Heitmueller
Quoted 8 lines · Devin Heitmueller
Quoted 5 lines

There's an ir_lock mutex in the driver to prevent simultaneous access to the Rx and Tx functions of the z8. Accessing Rx and Tx functions of the chip together can cause it to do the wrong thing (sometimes hang?), IIRC.

I'll see if I can dig up my old disassembly of the z8's firmware to see if that interlock is strictly necessary.

Yes I know ir-kbd-i2c is in mainline, but as I said, I had reasons for avoiding it when using Tx operation of the chip. It's been 7 years, and I'm getting too old to remember the reasons. :P

Yeah, you definitely don't want to be issuing requests to the Rx and Tx addresses at the same time. Very bad things will happen.

Right, ok. That's good to know. I'll have to merge the Tx code with ir-kbd-i2c or port lirc_zilog Rx to rc-core.

Quoted 1 line

Also, what is the polling interval for ir-kbd-i2c?

lirc_zilog polls every 260ms and ir-kbd-i2c polls every 100ms.

Quoted 4 lines

If it's too high
you can wedge the I2C bus (depending on the hardware design). Likewise, many people disable IR RX entirely (which is trivial to do with lirc_zilog through a modprobe optoin).

Yes, lirc_zilog has a tx_only option.

Quoted 7 lines

This is because early
versions of the HDPVR had issues where polling too often can interfere with traffic that configures the component receiver chip. This was improved in later versions of the design, but many people found it was just easiest to disable RX since they don't use it (i.e. they would use the blaster for controlling their STB but use a separate IR receiver).

That's very interesting.

Quoted 4 lines

Are you testing with video capture actively in use? If you're testing the IR interface without an active HD capture in progress you're likely to miss some of these edge cases (in particular those which would hang the encoder).

I had not, but I'll do that now.

Quoted 3 lines

I'm not against the removal of duplicate code in general, but you have to tread carefully because there are plenty of non-obvious edge cases to consider.

Absolutely, thank you for your insights.

Rather than relying on ir-kbd-i2c for receive, I can port lirc_zilog to rc-core and leave much of it in place.

Thanks

Sean

author maintainer
#11 lore raw

Re: [PATCH v3 04/26] media: lirc_zilog: remove receiver

In reply to Devin Heitmueller

Hi Devin, Andy,

Quoted 13 lines · Devin Heitmueller

Hi Andy,

Quoted 5 lines

5. Rx and IR Learn both use the same external hardware. Not coordinating Rx with Learn mode in the same driver, will prevent Learn operation from working. That is, if Learn mode is ever implemented. (Once upon a time, I was planning on doing that. But I have no time for that anymore.)

There's not really any infrastructure in Linux that maps to the Zilog's "learning mode" functionality. Usually I would just tell users to do the learning under Windows and send me the resulting .ini file (which we could then add to the database).

Quoted 5 lines

I had planned on getting rid of the database entirely and just converting an MCE compatible pulse train to the blasting format required by the Zilog firmware (using the awesome work you sent me privately), but the fact of the matter is that nobody cares and MCEUSB devices are $20 online.

I wouldn't mind working on that, if I had the blasting format. :)

Note that you can have IR Rx and Tx on a gpio port, so it can get even cheaper than $20. The hauppauge solution with a z8 microcontroller with it's non-obvious firmware and i2c format seem a bit ludricous.

Quoted 15 lines
Quoted 2 lines

I'm glad someone remembers all this stuff. I'm assuming you had more pain with this than I ever did.

This would be a safe assumption. I probably put about a month's worth of engineering into driver work for the Zilog, which seems extraordinary given how simple something like an IR blaster/receiver is supposed to be. I guess that's the fun of proving out a new hardware design as opposed to just making something work under Linux that is already known to work under Windows.

Quoted 1 line

I never owned an HD-PVR.

I'm sure I have a spare or two if you really want one (not that you have the time to muck with such things nowadays). :-)

Quoted 9 lines

The HD-PVR was a bit of a weird case compared to devices like ivtv and cx18 because it was technically multi-master (I2C commands came both from the host and from the onboard SOC). Hence you could have weird cases where one would block the other at unexpected times. I2C commands to the Zilog would hold the bus which would delay the onboard firmware from issuing commands to the video decoder (fun timing issues). There was also some weird edge case I don't recall the details of that prompted them to add an I2C gate in later board revisions.

Interesting.

Thanks

Sean

#36 lore raw

Re: [PATCH v3 26/26] kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit

In reply to Sean Young

Em Tue, 10 Oct 2017 09:59:42 +0200
Sean Young <[email protected]> escreveu:

Quoted 5 lines

If you try to store u64 in a kfifo (or a struct with u64 members), then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes padding due to alignment (note that struct __kfifo is 20 bytes on 32 bit).

Quoted 7 lines

That in turn causes the __is_kfifo_ptr() to fail, which is caught by kfifo_alloc(), which now returns EINVAL.

So, ensure that __is_kfifo_ptr() compares to the right structure.

Hi Stefani/Andrew,

As this patch is required for the LIRC rework, would be ok if I would merge it via the media tree?

Thanks!
Mauro

Quoted 10 lines
---
 include/linux/kfifo.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/kfifo.h +0 -0
index 41eb6fdf87a8..86b5fb08e96c 100644

include/linux/kfifo.h struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void); · line 120

Quoted 9 lines
include/linux/kfifo.h +2 -1
@@ -113,7 +113,8 @@ struct kfifo_rec_ptr_2 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
  * array is a part of the structure and the fifo type where the array is
  * outside of the fifo structure.
  */
-#define	__is_kfifo_ptr(fifo)	(sizeof(*fifo) == sizeof(struct __kfifo))
+#define	__is_kfifo_ptr(fifo) \
+	(sizeof(*fifo) == sizeof(STRUCT_KFIFO_PTR(typeof(*(fifo)->type))))
 
 /**
  * DECLARE_KFIFO_PTR - macro to declare a fifo pointer object

Thanks,
Mauro

maintainer
#37 lore raw

Re: [PATCH v3 26/26] kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit

Quoted 13 lines · Mauro Carvalho Chehab

Em Tue, 10 Oct 2017 09:59:42 +0200
Sean Young <[email protected]> escreveu:

Quoted 10 lines

If you try to store u64 in a kfifo (or a struct with u64 members), then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes padding due to alignment (note that struct __kfifo is 20 bytes on 32 bit).

That in turn causes the __is_kfifo_ptr() to fail, which is caught by kfifo_alloc(), which now returns EINVAL.

So, ensure that __is_kfifo_ptr() compares to the right structure.

Quoted 8 lines
Quoted 2 lines

Hi Stefani/Andrew,

As this patch is required for the LIRC rework, would be ok if I would merge it via the media tree?

It is okay by me. But the question remains why this patch wasn't already merged?

Andrew: Any objections against this patch?

Quoted 28 lines
Quoted 21 lines
---
 include/linux/kfifo.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/linux/kfifo.h +0 -0
index 41eb6fdf87a8..86b5fb08e96c 100644
@@ -113,7 +113,8 @@ struct kfifo_rec_ptr_2
 __STRUCT_KFIFO_PTR(unsigned char, 2, void);
  * array is a part of the structure and the fifo type where the

array is
* outside of the fifo structure.
*/
-#define __is_kfifo_ptr(fifo) (sizeof(*fifo) ==
sizeof(struct __kfifo))

include/linux/kfifo.h +2 -0
+#define	__is_kfifo_ptr(fifo) \
+	(sizeof(*fifo) == sizeof(STRUCT_KFIFO_PTR(typeof(*(fifo)-
Quoted 1 line

type))))

Quoted 2 lines

/**
* DECLARE_KFIFO_PTR - macro to declare a fifo pointer object

Thanks,
Mauro

#38 lore raw

Re: [PATCH v3 26/26] kfifo: DECLARE_KIFO_PTR(fifo, u64) does not work on arm 32 bit

Em Thu, 30 Nov 2017 13:34:10 +0100
Stefani Seibold <[email protected]> escreveu:

Quoted 19 lines · Mauro Carvalho Chehab
Quoted 18 lines

Em Tue, 10 Oct 2017 09:59:42 +0200
Sean Young <[email protected]> escreveu:

Quoted 5 lines

If you try to store u64 in a kfifo (or a struct with u64 members), then the buf member of __STRUCT_KFIFO_PTR will cause 4 bytes padding due to alignment (note that struct __kfifo is 20 bytes on 32 bit).

Quoted 7 lines

That in turn causes the __is_kfifo_ptr() to fail, which is caught by kfifo_alloc(), which now returns EINVAL.

So, ensure that __is_kfifo_ptr() compares to the right structure.

Hi Stefani/Andrew,

Quoted 8 lines
Quoted 3 lines

As this patch is required for the LIRC rework, would be ok if I would merge it via the media tree?

It is okay by me. But the question remains why this patch wasn't already merged?

Andrew: Any objections against this patch?

I'm assuming that merging via media tree is ok for Andrew. So, I guess I'll just go ahead and merge it via my tree.

Thanks,
Mauro