Skip to contentSkip to conversation

meson: makefile integration cleanup

PATCH In review Jani Nikula 4 participants 12 messages Oct 24, 2017 – Jan 17, 2018

Subsystems (2)
Kbuild Arm/Amlogic Meson SoC support
lore
Share & tools
lore

Jani Nikula

author
#0 lore raw

cover meson: makefile integration cleanup

I know the meson "makefile integration" is supposed to be just a simple helper, but add a touch of polish to it anyway.

BR,
Jani.

Jani Nikula (6):
meson: split out simple makefile integration into a makefile Makefile.meson: use $(error ...) for errors Makefile.meson: no need to mkdir build directory before running meson Makefile.meson: fix .PHONY deps
Makefile.meson: no need to have a separate default target Makefile.meson: add distclean target to remove Makefile and build dir

 Makefile.meson | 35 +++++++++++++++++++++++++++++++++++
 meson.sh       | 38 +++-----------------------------------
 2 files changed, 38 insertions(+), 35 deletions(-)
 create mode 100644 Makefile.meson
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#1 lore raw

PATCH 1/6 meson: split out simple makefile integration into a makefile

A separate makefile is easier to read and maintain than a here document. The meson.sh shell script becomes trivial too.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 33 +++++++++++++++++++++++++++++++++
 meson.sh       | 38 +++-----------------------------------
 2 files changed, 36 insertions(+), 35 deletions(-)
 create mode 100644 Makefile.meson
Makefile.meson new file +33 -0
new file mode 100644
index 000000000000..2ed642bdab37
@@ -0,0 +1,33 @@
+# -*- makefile -*-
+# Simple makefile integration for meson
+
+.PHONY: default docs
+default: all
+
+Makefile: Makefile.meson
+	cp $< $@
+
+build/build.ninja: Makefile
+	mkdir -p build
+	meson build
+
+all: build/build.ninja
+	ninja -C build
+
+clean: build/build.ninja
+	ninja -C build clean
+
+test: build/build.ninja
+	ninja -C build test
+
+reconfigure: build/build.ninja
+	ninja -C build reconfigure
+
+check distcheck dist distclean:
+	echo "This is the meson wrapper, not automake" && false
+
+install uninstall:
+	echo "meson install support not yet completed" && false
+
+docs:
+	echo "meson gtkdoc support not yet completed" && false
meson.sh +3 -35
index cbf1a9326dbe..cdb384eb16a6 100755
@@ -1,35 +1,3 @@
-#!/bin/bash
-
-cat > Makefile <<EOF
-
-.PHONY: default docs
-default: all
-
-build/build.ninja:
-	mkdir -p build
-	meson build
-
-all: build/build.ninja
-	ninja -C build
-
-clean: build/build.ninja
-	ninja -C build clean
-
-test: build/build.ninja
-	ninja -C build test
-
-reconfigure: build/build.ninja
-	ninja -C build reconfigure
-
-check distcheck dist distclean:
-	echo "This is the meson wrapper, not automake" && false
-
-install uninstall:
-	echo "meson install support not yet completed" && false
-
-docs:
-	echo "meson gtkdoc support not yet completed" && false
-
-EOF
-
-make $@
+#!/bin/sh
+# Simple makefile integration for meson
+make -f Makefile.meson "$@"
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Re: [PATCH i-g-t 1/6] meson: split out simple makefile integration into a makefile

Quoted 9 lines · Jani Nikula

A separate makefile is easier to read and maintain than a here document. The meson.sh shell script becomes trivial too.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 33 +++++++++++++++++++++++++++++++++
 meson.sh       | 38 +++-----------------------------------
 2 files changed, 36 insertions(+), 35 deletions(-)
 create mode 100644 Makefile.meson

I believe the goal for the toplevel makefile wrapper was to support editors that issue straight up 'make'.

Signature · 1 line
Petri Latvala
Quoted 90 lines
Makefile.meson new file +33 -0
new file mode 100644
index 000000000000..2ed642bdab37
@@ -0,0 +1,33 @@
+# -*- makefile -*-
+# Simple makefile integration for meson
+
+.PHONY: default docs
+default: all
+
+Makefile: Makefile.meson
+	cp $< $@
+
+build/build.ninja: Makefile
+	mkdir -p build
+	meson build
+
+all: build/build.ninja
+	ninja -C build
+
+clean: build/build.ninja
+	ninja -C build clean
+
+test: build/build.ninja
+	ninja -C build test
+
+reconfigure: build/build.ninja
+	ninja -C build reconfigure
+
+check distcheck dist distclean:
+	echo "This is the meson wrapper, not automake" && false
+
+install uninstall:
+	echo "meson install support not yet completed" && false
+
+docs:
+	echo "meson gtkdoc support not yet completed" && false
meson.sh +3 -35
index cbf1a9326dbe..cdb384eb16a6 100755
@@ -1,35 +1,3 @@
-#!/bin/bash
-
-cat > Makefile <<EOF
-
-.PHONY: default docs
-default: all
-
-build/build.ninja:
-	mkdir -p build
-	meson build
-
-all: build/build.ninja
-	ninja -C build
-
-clean: build/build.ninja
-	ninja -C build clean
-
-test: build/build.ninja
-	ninja -C build test
-
-reconfigure: build/build.ninja
-	ninja -C build reconfigure
-
-check distcheck dist distclean:
-	echo "This is the meson wrapper, not automake" && false
-
-install uninstall:
-	echo "meson install support not yet completed" && false
-
-docs:
-	echo "meson gtkdoc support not yet completed" && false
-
-EOF
-
-make $@
+#!/bin/sh
+# Simple makefile integration for meson
+make -f Makefile.meson "$@"
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

Re: [PATCH i-g-t 1/6] meson: split out simple makefile integration into a makefile

Quoted 12 lines · Petri Latvala
Quoted 9 lines · Jani Nikula

A separate makefile is easier to read and maintain than a here document. The meson.sh shell script becomes trivial too.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 33 +++++++++++++++++++++++++++++++++
 meson.sh       | 38 +++-----------------------------------
 2 files changed, 36 insertions(+), 35 deletions(-)
 create mode 100644 Makefile.meson
Quoted 2 lines

I believe the goal for the toplevel makefile wrapper was to support editors that issue straight up 'make'.

Yeah I wanted all the built-in editor support for make to Just Work, to reduce the transition cost for everyone. There's ofc emacs/vim/whatever plugins for meson. And typing :make -f Makefile.meson defeats the point of that, might as well install the plugin then.

But if there's no demand for this I'm happy with outright nuking it ... -Daniel

Quoted 104 lines
Signature · 2 lines
-- 
Petri Latvala
Quoted 90 lines
Makefile.meson new file +33 -0
new file mode 100644
index 000000000000..2ed642bdab37
@@ -0,0 +1,33 @@
+# -*- makefile -*-
+# Simple makefile integration for meson
+
+.PHONY: default docs
+default: all
+
+Makefile: Makefile.meson
+	cp $< $@
+
+build/build.ninja: Makefile
+	mkdir -p build
+	meson build
+
+all: build/build.ninja
+	ninja -C build
+
+clean: build/build.ninja
+	ninja -C build clean
+
+test: build/build.ninja
+	ninja -C build test
+
+reconfigure: build/build.ninja
+	ninja -C build reconfigure
+
+check distcheck dist distclean:
+	echo "This is the meson wrapper, not automake" && false
+
+install uninstall:
+	echo "meson install support not yet completed" && false
+
+docs:
+	echo "meson gtkdoc support not yet completed" && false
meson.sh +3 -35
index cbf1a9326dbe..cdb384eb16a6 100755
@@ -1,35 +1,3 @@
-#!/bin/bash
-
-cat > Makefile <<EOF
-
-.PHONY: default docs
-default: all
-
-build/build.ninja:
-	mkdir -p build
-	meson build
-
-all: build/build.ninja
-	ninja -C build
-
-clean: build/build.ninja
-	ninja -C build clean
-
-test: build/build.ninja
-	ninja -C build test
-
-reconfigure: build/build.ninja
-	ninja -C build reconfigure
-
-check distcheck dist distclean:
-	echo "This is the meson wrapper, not automake" && false
-
-install uninstall:
-	echo "meson install support not yet completed" && false
-
-docs:
-	echo "meson gtkdoc support not yet completed" && false
-
-EOF
-
-make $@
+#!/bin/sh
+# Simple makefile integration for meson
+make -f Makefile.meson "$@"
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#4 lore raw

PATCH 2/6 Makefile.meson: use $(error ...) for errors

In reply to Jani Nikula

This is the usual way of flagging fatal errors in Makefiles, and gives you the error exit code too.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Makefile.meson +3 -3
index 2ed642bdab37..6955e6a9a694 100644
@@ -24,10 +24,10 @@ reconfigure: build/build.ninja
 	ninja -C build reconfigure
 
 check distcheck dist distclean:
-	echo "This is the meson wrapper, not automake" && false
+	$(error This is the meson wrapper, not automake)
 
 install uninstall:
-	echo "meson install support not yet completed" && false
+	$(error meson install support not yet completed)
 
 docs:
-	echo "meson gtkdoc support not yet completed" && false
+	$(error meson gtkdoc support not yet completed)
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 2/6
#5 lore raw

Re: [PATCH i-g-t 2/6] Makefile.meson: use $(error ...) for errors

Quoted 4 lines · Jani Nikula

This is the usual way of flagging fatal errors in Makefiles, and gives you the error exit code too.

Signed-off-by Jani Nikula <[email protected]>

Regardless of where this change is done (meson.sh output or Makefile.meson, see reply to patch 1),

Reviewed-by Petri Latvala <[email protected]>
Quoted 29 lines
---
 Makefile.meson | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Makefile.meson +3 -3
index 2ed642bdab37..6955e6a9a694 100644
@@ -24,10 +24,10 @@ reconfigure: build/build.ninja
 	ninja -C build reconfigure
 
 check distcheck dist distclean:
-	echo "This is the meson wrapper, not automake" && false
+	$(error This is the meson wrapper, not automake)
 
 install uninstall:
-	echo "meson install support not yet completed" && false
+	$(error meson install support not yet completed)
 
 docs:
-	echo "meson gtkdoc support not yet completed" && false
+	$(error meson gtkdoc support not yet completed)
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

author
#6 lore raw

PATCH 3/6 Makefile.meson: no need to mkdir build directory before running meson

In reply to Jani Nikula

Meson creates the directory for you.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 1 -
 1 file changed, 1 deletion(-)
Makefile.meson +0 -1
index 6955e6a9a694..9f71cf341121 100644
@@ -8,7 +8,6 @@ Makefile: Makefile.meson
 	cp $< $@
 
 build/build.ninja: Makefile
-	mkdir -p build
 	meson build
 
 all: build/build.ninja
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#7 lore raw

PATCH 4/6 Makefile.meson: fix .PHONY deps

In reply to Jani Nikula

Most targets here are phony, tell that to make. Avoid potentials collisions with files and directories with the same names.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Makefile.meson +3 -1
index 9f71cf341121..82fa50bf92e5 100644
@@ -1,7 +1,9 @@
 # -*- makefile -*-
 # Simple makefile integration for meson
 
-.PHONY: default docs
+.PHONY: default all clean test reconfigure check distcheck dist distclean \
+	install uninstall docs
+
 default: all
 
 Makefile: Makefile.meson
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#8 lore raw

PATCH 5/6 Makefile.meson: no need to have a separate default target

In reply to Jani Nikula

Just place "all" target at the top. Makefiles aren't ordered.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
Makefile.meson +4 -6
index 82fa50bf92e5..c7a87f37f47d 100644
@@ -1,10 +1,11 @@
 # -*- makefile -*-
 # Simple makefile integration for meson
 
-.PHONY: default all clean test reconfigure check distcheck dist distclean \
-	install uninstall docs
+.PHONY: all clean test reconfigure check distcheck dist distclean install \
+	uninstall docs
 
-default: all
+all: build/build.ninja
+	ninja -C build
 
 Makefile: Makefile.meson
 	cp $< $@

@@ -12,9 +13,6 @@ Makefile: Makefile.meson
 build/build.ninja: Makefile
 	meson build
 
-all: build/build.ninja
-	ninja -C build
-
 clean: build/build.ninja
 	ninja -C build clean
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
author
#9 lore raw

PATCH 6/6 Makefile.meson: add distclean target to remove Makefile and build dir

In reply to Jani Nikula

Useful for forcing a clean meson build from scratch.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
Makefile.meson +4 -1
index c7a87f37f47d..2e09c11052da 100644
@@ -16,13 +16,16 @@ build/build.ninja: Makefile
 clean: build/build.ninja
 	ninja -C build clean
 
+distclean:
+	rm -rf build Makefile
+
 test: build/build.ninja
 	ninja -C build test
 
 reconfigure: build/build.ninja
 	ninja -C build reconfigure
 
-check distcheck dist distclean:
+check distcheck dist:
 	$(error This is the meson wrapper, not automake)
 
 install uninstall:
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 6/6
#10 lore raw

Re: [PATCH i-g-t 6/6] Makefile.meson: add distclean target to remove Makefile and build dir

Quoted 12 lines · Jani Nikula

Useful for forcing a clean meson build from scratch.

Signed-off-by Jani Nikula <[email protected]>
---
 Makefile.meson | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
Makefile.meson +0 -0
index c7a87f37f47d..2e09c11052da 100644

Makefile.meson build/build.ninja: Makefile · line 21

Quoted 6 lines
Makefile.meson +3 -0
@@ -16,13 +16,16 @@ build/build.ninja: Makefile
 clean: build/build.ninja
 	ninja -C build clean
 
+distclean:
+	rm -rf build Makefile
+

If patch 1 is applied, there is no Makefile to remove. Adjusted accordingly, this patch and 3-5 as well are

Reviewed-by Petri Latvala <[email protected]>
Quoted 18 lines
Makefile.meson +1 -1
 test: build/build.ninja
 	ninja -C build test
 
 reconfigure: build/build.ninja
 	ninja -C build reconfigure
 
-check distcheck dist distclean:
+check distcheck dist:
 	$(error This is the meson wrapper, not automake)
 
 install uninstall:
Signature · 6 lines
2.11.0

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

CI
#11 lore raw

✗ Fi.CI.BAT: warning for meson: makefile integration cleanup

In reply to Jani Nikula
== Series Details ==

== Series Details ==

Series: meson: makefile integration cleanup
URL : https://patchwork.freedesktop.org/series/32519/
State : warning

== Summary ==

IGT patchset tested on top of latest successful build e5f7fac9f120b0dcbf370c681b8872b8c29bf890 meson: intel_dp_compliance depends on libudev

with latest DRM-Tip kernel build CI_DRM_3276
5c82a37eff83 drm-tip: 2017y-10m-23d-18h-06m-28s UTC integration manifest

No testlist changes.

Test chamelium:

        Subgroup dp-crc-fast:
                pass       -> FAIL       (fi-kbl-7500u) fdo#102514
Test kms_frontbuffer_tracking:
        Subgroup basic:
                fail       -> PASS       (fi-glk-dsi)
Test drv_module_reload:
        Subgroup basic-reload:
                pass       -> DMESG-WARN (fi-bsw-n3050)

fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:444s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:461s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:374s
fi-bsw-n3050     total:289  pass:242  dwarn:1   dfail:0   fail:0   skip:46  time:531s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:264s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:499s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:497s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:494s
fi-cfl-s         total:289  pass:253  dwarn:4   dfail:0   fail:0   skip:32  time:561s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:602s
fi-elk-e7500     total:289  pass:229  dwarn:0   dfail:0   fail:0   skip:60  time:419s
fi-gdg-551       total:289  pass:178  dwarn:1   dfail:0   fail:1   skip:109 time:251s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:579s
fi-glk-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:489s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:432s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:434s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:438s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:484s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:461s
fi-kbl-7500u     total:289  pass:263  dwarn:1   dfail:0   fail:1   skip:24  time:480s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:582s
fi-kbl-7567u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:476s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:582s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:551s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:458s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:648s
fi-skl-6700k     total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:524s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:501s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:461s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:565s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:418s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_400/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx