add dts nodes to MT7622 SoC
Subsystems (3)
v3 cover add dts nodes to MT7622 SoC
From: Sean Wang <[email protected]>
Changes since v2:
- rebase to 4.16-rc1 and solve all conflicts
- add proper list Cc in patch 1
- add fixup in patch 4 in v2 with the uniform pinmux definition that is always adding property function before property groups
- add Acked-by from Philippe in patch 5
- add clock related property into all CPU nodes in patch 6
- merge patch 14 in v2 into patch 8 as this is where the node is defined in the first place
Changes since v1:
- add usb, thermal, HSDMA, mmc related nodes
- fix Warning (unit_address_vs_reg): Node /oscillator at 0 has a unit name, but no reg property in patch 2
- fix Warning (pci_bridge): Node /pcie at 1a140000/pcie at 0,0 missing bus-range for PCI bridge
- fix Warning (pci_bridge): Node /pcie at 1a140000/pcie at 1,0 missing bus-range for PCI bridge
- fix Warning (unit_address_format): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
- enhance commit log in patch 4
- use - instead of _ in DT node name in patch 4 and 6
- use SPDX-License-Identifier for newly added files in patch 5
- use proper #size-cells for spi nor nodes in patch 9
- remove currently no needed #address-cells and #size-cells in children nodes of spi nor in patch 9.
Chunfeng Yun (1):
arm64: dts: mt7622: add usb device nodes
Ryder Lee (2):
arm64: dts: mt7622: add PCIe device nodes
arm64: dts: mt7622: add SATA device nodes
Sean Wang (12):
dt-bindings: clock: mediatek: add missing required #reset-cells
arm64: dts: mt7622: add clock controller device nodes
arm64: dts: mt7622: add power domain controller device nodes
arm64: dts: mt7622: add pinctrl related device nodes
arm64: dts: mt7622: add PMIC MT6380 related nodes
arm64: dts: mt7622: add cpufreq related device nodes
arm64: dts: mt7622: turn uart0 clock to real ones
arm64: dts: mt7622: add SoC and peripheral related device nodes
arm64: dts: mt7622: add flash related device nodes
arm64: dts: mt7622: add ethernet device nodes
arm64: dts: mt7622: add High-Speed DMA device nodes
arm64: dts: mt7622: add mmc related device nodes
.../bindings/arm/mediatek/mediatek,ethsys.txt | 1 + .../bindings/arm/mediatek/mediatek,pciesys.txt | 2 + .../bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 + arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 +++ arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 469 ++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 685 ++++++++++++++++++++- 6 files changed, 1240 insertions(+), 5 deletions(-) create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
Signature · 1 line
2.7.4
PATCH v3 1/15 dt-bindings: clock: mediatek: add missing required #reset-cells
From: Sean Wang <[email protected]>
All ethsys, pciesys and ssusbsys internally include reset controller, so explicitly add back these missing cell definitions to related bindings and examples.
--- Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++ Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++ 3 files changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +1 -0
@@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-ethsys", "syscon" - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 +- #reset-cells: Must be 1 The ethsys controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt
Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt +2 -0
@@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-pciesys", "syscon" - #clock-cells: Must be 1 +- #reset-cells: Must be 1 The PCIESYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ pciesys: pciesys at 1a100800 { compatible = "mediatek,mt7622-pciesys", "syscon"; reg = <0 0x1a100800 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; };
Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt +2 -0
@@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-ssusbsys", "syscon" - #clock-cells: Must be 1 +- #reset-cells: Must be 1 The SSUSBSYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -19,4 +20,5 @@ ssusbsys: ssusbsys at 1a000000 { compatible = "mediatek,mt7622-ssusbsys", "syscon"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; };
Signature · 1 line
2.7.4
PATCH v3 2/15 arm64: dts: mt7622: add clock controller device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
Add clock controller nodes for MT7622 and include header for topckgen, infracfg, pericfg, apmixedsys, ethsys, sgmiisys, pciesys and ssusbsys for those devices nodes to be added afterwards.
In addition, provides an oscillator node for the source of PLLs and dummy clock for PWARP to complement missing support of clock gate for the wrapper circuit in the driver.
--- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 76 ++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622.dtsi +76 -0
@@ -8,6 +8,8 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mt7622-clk.h> +#include <dt-bindings/reset/mt7622-reset.h> / { compatible = "mediatek,mt7622";
@@ -48,6 +50,19 @@ clock-frequency = <280000000>; }; + pwrap_clk: dummy40m { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + + clk25m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "clkxtal"; + }; + psci { compatible = "arm,psci-0.2"; method = "smc";
@@ -78,6 +93,22 @@ IRQ_TYPE_LEVEL_HIGH)>; }; + infracfg: infracfg at 10000000 { + compatible = "mediatek,mt7622-infracfg", + "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: pericfg at 10002000 { + compatible = "mediatek,mt7622-pericfg", + "syscon"; + reg = <0 0x10002000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + sysirq: interrupt-controller at 10200620 { compatible = "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq";
@@ -87,6 +118,20 @@ reg = <0 0x10200620 0 0x20>; }; + apmixedsys: apmixedsys at 10209000 { + compatible = "mediatek,mt7622-apmixedsys", + "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + + topckgen: topckgen at 10210000 { + compatible = "mediatek,mt7622-topckgen", + "syscon"; + reg = <0 0x10210000 0 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller at 10300000 { compatible = "arm,gic-400"; interrupt-controller;
@@ -107,4 +152,35 @@ clock-names = "baud", "bus"; status = "disabled"; }; + + ssusbsys: ssusbsys at 1a000000 { + compatible = "mediatek,mt7622-ssusbsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pciesys: pciesys at 1a100800 { + compatible = "mediatek,mt7622-pciesys", + "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + ethsys: syscon at 1b000000 { + compatible = "mediatek,mt7622-ethsys", + "syscon"; + reg = <0 0x1b000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sgmiisys: sgmiisys at 1b128000 { + compatible = "mediatek,mt7622-sgmiisys", + "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; + }; };
Signature · 1 line
2.7.4
PATCH v3 3/15 arm64: dts: mt7622: add power domain controller device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
add power domain controller nodes
--- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622.dtsi +15 -0
@@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt7622-clk.h> +#include <dt-bindings/power/mt7622-power.h> #include <dt-bindings/reset/mt7622-reset.h> / {
@@ -109,6 +110,20 @@ #reset-cells = <1>; }; + scpsys: scpsys at 10006000 { + compatible = "mediatek,mt7622-scpsys", + "syscon"; + #power-domain-cells = <1>; + reg = <0 0x10006000 0 0x1000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + infracfg = <&infracfg>; + clocks = <&topckgen CLK_TOP_HIF_SEL>; + clock-names = "hif_sel"; + }; + sysirq: interrupt-controller at 10200620 { compatible = "mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq";
Signature · 1 line
2.7.4
PATCH v3 4/15 arm64: dts: mt7622: add pinctrl related device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
add pinctrl device nodes and rfb1 board, additionally include all pin groups possible being used on rfb1 board and available gpio keys.
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 200 +++++++++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 7 + 2 files changed, 207 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +200 -0
@@ -7,6 +7,8 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> + #include "mt7622.dtsi" / {
@@ -17,11 +19,209 @@ bootargs = "console=ttyS0,115200n1"; }; + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + factory { + label = "factory"; + linux,code = <BTN_0>; + gpios = <&pio 0 0>; + }; + + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&pio 102 0>; + }; + }; + memory { reg = <0 0x40000000 0 0x3F000000>; }; }; +&pio { + /* eMMC is shared pin with parallel NAND */ + emmc_pins_default: emmc-pins-default { + mux { + function = "emmc", "emmc_rst"; + groups = "emmc"; + }; + }; + + emmc_pins_uhs: emmc-pins-uhs { + mux { + function = "emmc"; + groups = "emmc"; + }; + }; + + eth_pins: eth-pins { + mux { + function = "eth"; + groups = "mdc_mdio", "rgmii_via_gmac2"; + }; + }; + + i2c1_pins: i2c1-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_pins: i2c2-pins { + mux { + function = "i2c"; + groups = "i2c2_0"; + }; + }; + + i2s1_pins: i2s1-pins { + mux { + function = "i2s"; + groups = "i2s_out_bclk_ws_mclk", + "i2s1_in_data", + "i2s1_out_data"; + }; + }; + + irrx_pins: irrx-pins { + mux { + function = "ir"; + groups = "ir_1_rx"; + }; + }; + + irtx_pins: irtx-pins { + mux { + function = "ir"; + groups = "ir_1_tx"; + }; + }; + + /* Parallel nand is shared pin with eMMC */ + parallel_nand_pins: parallel-nand-pins { + mux { + function = "flash"; + groups = "par_nand"; + }; + }; + + pcie0_pins: pcie0-pins { + mux { + function = "pcie"; + groups = "pcie0_pad_perst", + "pcie0_1_waken", + "pcie0_1_clkreq"; + }; + }; + + pcie1_pins: pcie1-pins { + mux { + function = "pcie"; + groups = "pcie1_pad_perst", + "pcie1_0_waken", + "pcie1_0_clkreq"; + }; + }; + + pmic_bus_pins: pmic-bus-pins { + mux { + function = "pmic"; + groups = "pmic_bus"; + }; + }; + + pwm7_pins: pwm1-2-pins { + mux { + function = "pwm"; + groups = "pwm_ch7_2"; + }; + }; + + wled_pins: wled-pins { + mux { + function = "led"; + groups = "wled"; + }; + }; + + sd0_pins_default: sd0-pins-default { + mux { + function = "sd"; + groups = "sd_0"; + }; + }; + + sd0_pins_uhs: sd0-pins-uhs { + mux { + function = "sd"; + groups = "sd_0"; + }; + }; + + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + spic0_pins: spic0-pins { + mux { + function = "spi"; + groups = "spic0_0"; + }; + }; + + spic1_pins: spic1-pins { + mux { + function = "spi"; + groups = "spic1_0"; + }; + }; + + /* SPI-NOR is shared pin with serial NAND */ + spi_nor_pins: spi-nor-pins { + mux { + function = "flash"; + groups = "spi_nor"; + }; + }; + + /* serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + }; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0_0_tx_rx" ; + }; + }; + + uart2_pins: uart2-pins { + mux { + function = "uart"; + groups = "uart2_1_tx_rx" ; + }; + }; + + watchdog_pins: watchdog-pins { + mux { + function = "watchdog"; + groups = "watchdog"; + }; + }; +}; + &uart0 { status = "okay"; };
arch/arm64/boot/dts/mediatek/mt7622.dtsi +7 -0
@@ -147,6 +147,13 @@ #clock-cells = <1>; }; + pio: pinctrl at 10211000 { + compatible = "mediatek,mt7622-pinctrl"; + reg = <0 0x10211000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + gic: interrupt-controller at 10300000 { compatible = "arm,gic-400"; interrupt-controller;
Signature · 1 line
2.7.4
PATCH v3 5/15 arm64: dts: mt7622: add PMIC MT6380 related nodes
In reply to [email protected]From: Sean Wang <[email protected]>
Enable pwrap and MT6380 on mt7622-rfb1 board. Also add all mt6380 regulator nodes in an alone file to allow similar boards using MT6380 able to resue the configuration.
--- arch/arm64/boot/dts/mediatek/mt6380.dtsi | 86 ++++++++++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 +++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 12 ++++ 3 files changed, 106 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt6380.dtsi
arch/arm64/boot/dts/mediatek/mt6380.dtsi new file +86 -0
@@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for MediaTek MT6380 regulator + * + * Copyright (c) 2018 MediaTek Inc. + * Author: Chenglin Xu <[email protected]> + * Sean Wang <[email protected]> + */ + +&pwrap { + regulators { + compatible = "mediatek,mt6380-regulator"; + + mt6380_vcpu_reg: buck-vcore1 { + regulator-name = "vcore1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vcore_reg: buck-vcore { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vrf_reg: buck-vrf { + regulator-name = "vrf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1575000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vm_reg: ldo-vm { + regulator-name = "vm"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_va_reg: ldo-va { + regulator-name = "va"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vphy_reg: ldo-vphy { + regulator-name = "vphy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vddr_reg: ldo-vddr { + regulator-name = "vddr"; + regulator-min-microvolt = <1240000>; + regulator-max-microvolt = <1840000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + mt6380_vt_reg: ldo-vt { + regulator-name = "vt"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + }; +};
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +8 -0
@@ -10,6 +10,7 @@ #include <dt-bindings/input/input.h> #include "mt7622.dtsi" +#include "mt6380.dtsi" / { model = "MediaTek MT7622 RFB1 board";
@@ -222,6 +223,13 @@ }; }; +&pwrap { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_bus_pins>; + + status = "okay"; +}; + &uart0 { status = "okay"; };
arch/arm64/boot/dts/mediatek/mt7622.dtsi +12 -0
@@ -102,6 +102,18 @@ #reset-cells = <1>; }; + pwrap: pwrap at 10001000 { + compatible = "mediatek,mt7622-pwrap"; + reg = <0 0x10001000 0 0x250>; + reg-names = "pwrap"; + clocks = <&infracfg CLK_INFRA_PMIC_PD>,<&pwrap_clk>; + clock-names = "spi","wrap"; + resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>; + reset-names = "pwrap"; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pericfg: pericfg at 10002000 { compatible = "mediatek,mt7622-pericfg", "syscon";
Signature · 1 line
2.7.4
PATCH v3 6/15 arm64: dts: mt7622: add cpufreq related device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
Add clocks, regulators and opp information into cpu nodes. In addition, the power supply for cpu nodes is deployed on mt7622-rfb1 board.
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 52 ++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +12 -0
@@ -20,6 +20,18 @@ bootargs = "console=ttyS0,115200n1"; }; + cpus { + cpu at 0 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + + cpu at 1 { + proc-supply = <&mt6380_vcpu_reg>; + sram-supply = <&mt6380_vm_reg>; + }; + }; + gpio-keys { compatible = "gpio-keys-polled"; poll-interval = <100>;
arch/arm64/boot/dts/mediatek/mt7622.dtsi +52 -0
70 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 7/15 arm64: dts: mt7622: turn uart0 clock to real ones
In reply to [email protected]From: Sean Wang <[email protected]>
This patch also cleans up two oscillators that provide clocks for MT7623. Switch the uart clocks to the real ones while at it.
--- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-)
arch/arm64/boot/dts/mediatek/mt7622.dtsi +2 -13
@@ -91,18 +91,6 @@ }; }; - uart_clk: dummy25m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - bus_clk: dummy280m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <280000000>; - }; - pwrap_clk: dummy40m { compatible = "fixed-clock"; clock-frequency = <40000000>;
@@ -234,7 +222,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>, <&bus_clk>; + clocks = <&topckgen CLK_TOP_UART_SEL>, + <&pericfg CLK_PERI_UART1_PD>; clock-names = "baud", "bus"; status = "disabled"; };
Signature · 1 line
2.7.4
PATCH v3 8/15 arm64: dts: mt7622: add SoC and peripheral related device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
Add watchdog, rtc, auxadc, cir, efuse, rng, uart[1-4], pwm, i2c[0-2], spi[0-1], btif and thermal related nodes.
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 54 ++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 264 +++++++++++++++++++++++++++ 2 files changed, 318 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +54 -0
@@ -235,6 +235,34 @@ }; }; +&btif { + status = "okay"; +}; + +&cir { + pinctrl-names = "default"; + pinctrl-0 = <&irrx_pins>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pins>; + status = "okay"; +}; + &pwrap { pinctrl-names = "default"; pinctrl-0 = <&pmic_bus_pins>;
@@ -242,6 +270,32 @@ status = "okay"; }; +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spic0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spic1_pins>; + status = "okay"; +}; + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&watchdog { + pinctrl-names = "default"; + pinctrl-0 = <&watchdog_pins>; status = "okay"; };
arch/arm64/boot/dts/mediatek/mt7622.dtsi +264 -0
318 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 9/15 arm64: dts: mt7622: add flash related device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
add nodes for NOR flash, parallel Nand flash with error correction code support.
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 21 +++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 34 ++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +21 -0
@@ -235,6 +235,10 @@ }; }; +&bch { + status = "disabled"; +}; + &btif { status = "okay"; };
@@ -257,6 +261,23 @@ status = "okay"; }; +&nandc { + pinctrl-names = "default"; + pinctrl-0 = <¶llel_nand_pins>; + status = "disabled"; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&spi_nor_pins>; + status = "disabled"; + + flash at 0 { + compatible = "jedec,spi-nor"; + reg = <0>; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm7_pins>;
arch/arm64/boot/dts/mediatek/mt7622.dtsi +34 -0
@@ -468,6 +468,40 @@ status = "disabled"; }; + nandc: nfi at 1100d000 { + compatible = "mediatek,mt7622-nfc"; + reg = <0 0x1100D000 0 0x1000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFI_PD>, + <&pericfg CLK_PERI_SNFI_PD>; + clock-names = "nfi_clk", "pad_clk"; + ecc-engine = <&bch>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bch: ecc at 1100e000 { + compatible = "mediatek,mt7622-ecc"; + reg = <0 0x1100e000 0 0x1000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_NFIECC_PD>; + clock-names = "nfiecc_clk"; + status = "disabled"; + }; + + nor_flash: spi at 11014000 { + compatible = "mediatek,mt7622-nor", + "mediatek,mt8173-nor"; + reg = <0 0x11014000 0 0xe0>; + clocks = <&pericfg CLK_PERI_FLASH_PD>, + <&topckgen CLK_TOP_FLASH_SEL>; + clock-names = "spi", "sf"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi1: spi at 11016000 { compatible = "mediatek,mt7622-spi"; reg = <0 0x11016000 0 0x100>;
Signature · 1 line
2.7.4
PATCH v3 10/15 arm64: dts: mt7622: add ethernet device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
add ethernet device nodes which enable GMAC1 with SGMII interface
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 22 ++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 31 ++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +22 -0
@@ -249,6 +249,28 @@ status = "okay"; }; +ð { + pinctrl-names = "default"; + pinctrl-0 = <ð_pins>; + status = "okay"; + + gmac1: mac at 1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy5>; + }; + + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy at 5 { + reg = <5>; + phy-mode = "sgmii"; + }; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>;
arch/arm64/boot/dts/mediatek/mt7622.dtsi +31 -0
@@ -550,6 +550,37 @@ #reset-cells = <1>; }; + eth: ethernet at 1b100000 { + compatible = "mediatek,mt7622-eth", + "mediatek,mt2701-eth", + "syscon"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sgmiisys: sgmiisys at 1b128000 { compatible = "mediatek,mt7622-sgmiisys", "syscon";
Signature · 1 line
2.7.4
PATCH v3 11/15 arm64: dts: mt7622: add PCIe device nodes
In reply to [email protected]From: Ryder Lee <[email protected]>
This patch adds PCIe support fot MT7622.
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 10 ++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 74 ++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +10 -0
@@ -54,6 +54,16 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>; + status = "okay"; + + pcie at 0,0 { + status = "okay"; + }; +}; + &pio { /* eMMC is shared pin with parallel NAND */ emmc_pins_default: emmc-pins-default {
arch/arm64/boot/dts/mediatek/mt7622.dtsi +74 -0
80 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 12/15 arm64: dts: mt7622: add SATA device nodes
In reply to [email protected]From: Ryder Lee <[email protected]>
This patch adds SATA support fot MT7622.
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 8 ++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 40 ++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +8 -0
@@ -323,6 +323,14 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +}; + &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spic0_pins>;
arch/arm64/boot/dts/mediatek/mt7622.dtsi +40 -0
@@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt7622-clk.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt7622-power.h> #include <dt-bindings/reset/mt7622-reset.h> #include <dt-bindings/thermal/thermal.h>
@@ -616,6 +617,45 @@ }; }; + sata: sata at 1a200000 { + compatible = "mediatek,mt7622-ahci", + "mediatek,mtk-ahci"; + reg = <0 0x1a200000 0 0x1100>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hostc"; + clocks = <&pciesys CLK_SATA_AHB_EN>, + <&pciesys CLK_SATA_AXI_EN>, + <&pciesys CLK_SATA_ASIC_EN>, + <&pciesys CLK_SATA_RBC_EN>, + <&pciesys CLK_SATA_PM_EN>; + clock-names = "ahb", "axi", "asic", "rbc", "pm"; + phys = <&sata_port PHY_TYPE_SATA>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + resets = <&pciesys MT7622_SATA_AXI_BUS_RST>, + <&pciesys MT7622_SATA_PHY_SW_RST>, + <&pciesys MT7622_SATA_PHY_REG_RST>; + reset-names = "axi", "sw", "reg"; + mediatek,phy-mode = <&pciesys>; + status = "disabled"; + }; + + sata_phy: sata-phy at 1a243000 { + compatible = "mediatek,generic-tphy-v1"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + sata_port: sata-phy at 1a243000 { + reg = <0 0x1a243000 0 0x0100>; + clocks = <&topckgen CLK_TOP_ETH_500M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + ethsys: syscon at 1b000000 { compatible = "mediatek,mt7622-ethsys", "syscon";
Signature · 1 line
2.7.4
PATCH v3 13/15 arm64: dts: mt7622: add usb device nodes
In reply to [email protected]From: Chunfeng Yun <[email protected]>
add xhci node and usb3 phy nodes
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 28 +++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 51 ++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +28 -0
@@ -52,6 +52,24 @@ memory { reg = <0 0x40000000 0 0x3F000000>; }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; }; &pcie {
@@ -343,6 +361,16 @@ status = "okay"; }; +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins>;
arch/arm64/boot/dts/mediatek/mt7622.dtsi +51 -0
57 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v3 14/15 arm64: dts: mt7622: add High-Speed DMA device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
add High-Speed DMA (HSDMA) nodes
--- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622.dtsi +10 -0
@@ -715,6 +715,16 @@ #reset-cells = <1>; }; + hsdma: dma-controller at 1b007000 { + compatible = "mediatek,mt7622-hsdma"; + reg = <0 0x1b007000 0 0x1000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETH_HSDMA_EN>; + clock-names = "hsdma"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + #dma-cells = <1>; + }; + eth: ethernet at 1b100000 { compatible = "mediatek,mt7622-eth", "mediatek,mt2701-eth",
Signature · 1 line
2.7.4
PATCH v3 15/15 arm64: dts: mt7622: add mmc related device nodes
In reply to [email protected]From: Sean Wang <[email protected]>
add mmc device nodes and proper setup for used pins
--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 106 +++++++++++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 20 +++++ 2 files changed, 126 insertions(+)
arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +106 -0
@@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "mt7622.dtsi" #include "mt6380.dtsi"
@@ -53,6 +54,14 @@ reg = <0 0x40000000 0 0x3F000000>; }; + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V";
@@ -89,6 +98,23 @@ function = "emmc", "emmc_rst"; groups = "emmc"; }; + + /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7", + * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4, + * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively + */ + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + bias-pull-down; + }; }; emmc_pins_uhs: emmc-pins-uhs {
@@ -96,6 +122,21 @@ function = "emmc"; groups = "emmc"; }; + + conf-cmd-dat { + pins = "NDL0", "NDL1", "NDL2", + "NDL3", "NDL4", "NDL5", + "NDL6", "NDL7", "NRB"; + input-enable; + drive-strength = <4>; + bias-pull-up; + }; + + conf-clk { + pins = "NCLE"; + drive-strength = <4>; + bias-pull-down; + }; }; eth_pins: eth-pins {
@@ -194,6 +235,27 @@ function = "sd"; groups = "sd_0"; }; + + /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN", + * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1, + * DAT2, DAT3, CMD, CLK for SD respectively. + */ + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + drive-strength = <8>; + bias-pull-up; + }; + conf-clk { + pins = "I2S3_OUT"; + drive-strength = <12>; + bias-pull-down; + }; + conf-cd { + pins = "TXD3"; + bias-pull-up; + }; }; sd0_pins_uhs: sd0-pins-uhs {
@@ -201,6 +263,18 @@ function = "sd"; groups = "sd_0"; }; + + conf-cmd-data { + pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN", + "I2S2_IN","I2S4_OUT"; + input-enable; + bias-pull-up; + }; + + conf-clk { + pins = "I2S3_OUT"; + bias-pull-down; + }; }; /* Serial NAND is shared pin with SPI-NOR */
@@ -311,6 +385,38 @@ status = "okay"; }; +&mmc0 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_uhs>; + status = "okay"; + bus-width = <8>; + max-frequency = <50000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sd0_pins_default>; + pinctrl-1 = <&sd0_pins_uhs>; + status = "okay"; + bus-width = <4>; + max-frequency = <50000000>; + cap-sd-highspeed; + r_smpl = <1>; + cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>; +}; + &nandc { pinctrl-names = "default"; pinctrl-0 = <¶llel_nand_pins>;
arch/arm64/boot/dts/mediatek/mt7622.dtsi +20 -0
@@ -527,6 +527,26 @@ status = "disabled"; }; + mmc0: mmc at 11230000 { + compatible = "mediatek,mt7622-mmc"; + reg = <0 0x11230000 0 0x1000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_0_PD>, + <&topckgen CLK_TOP_MSDC50_0_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + + mmc1: mmc at 11240000 { + compatible = "mediatek,mt7622-mmc"; + reg = <0 0x11240000 0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_MSDC30_1_PD>, + <&topckgen CLK_TOP_AXI_SEL>; + clock-names = "source", "hclk"; + status = "disabled"; + }; + ssusbsys: ssusbsys at 1a000000 { compatible = "mediatek,mt7622-ssusbsys", "syscon";
Signature · 1 line
2.7.4
Re: [PATCH v3 06/15] arm64: dts: mt7622: add cpufreq related device nodes
In reply to [email protected]Quoted 6 lines · sean.wang at mediatek.com
From: Sean Wang <[email protected]>
Add clocks, regulators and opp information into cpu nodes. In addition, the power supply for cpu nodes is deployed on mt7622-rfb1 board.
Quoted 6 lines
Signed-off-by Sean Wang <[email protected]>Cc Viresh Kumar <[email protected]>--- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 12 +++++++ arch/arm64/boot/dts/mediatek/mt7622.dtsi | 52 ++++++++++++++++++++++++++++ 2 files changed, 64 insertions(+)
Signature · 1 line
viresh
Re: [PATCH v3 01/15] dt-bindings: clock: mediatek: add missing required #reset-cells
In reply to [email protected]Quoted 6 lines · sean.wang at mediatek.com
From: Sean Wang <[email protected]>
All ethsys, pciesys and ssusbsys internally include reset controller, so explicitly add back these missing cell definitions to related bindings and examples.
Quoted 6 lines
Signed-off-by Sean Wang <[email protected]>Cc Rob Herring <[email protected]>Cc Michael Turquette <[email protected]>Cc Stephen Boyd <[email protected]>Cc linux-clk at vger.kernel.orgReviewed-by Rob Herring <[email protected]>
Quoted 55 lines
--- Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 1 + Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt | 2 ++ Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt | 2 ++ 3 files changed, 5 insertions(+)Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +1
-0@@ -9,6 +9,7 @@ Required Properties: - "mediatek,mt2701-ethsys", "syscon" - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 +- #reset-cells: Must be 1 The ethsys controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txtDocumentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt +2
-0@@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-pciesys", "syscon" - #clock-cells: Must be 1 +- #reset-cells: Must be 1 The PCIESYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt@@ -19,4 +20,5 @@ pciesys: pciesys at 1a100800 { compatible = "mediatek,mt7622-pciesys", "syscon"; reg = <0 0x1a100800 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; };Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt +2
-0@@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt7622-ssusbsys", "syscon" - #clock-cells: Must be 1 +- #reset-cells: Must be 1 The SSUSBSYS controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt@@ -19,4 +20,5 @@ ssusbsys: ssusbsys at 1a000000 { compatible = "mediatek,mt7622-ssusbsys", "syscon"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; };
Matthias Brugger
maintainerRe: [PATCH v3 14/15] arm64: dts: mt7622: add High-Speed DMA device nodes
In reply to [email protected]Quoted 5 lines · sean.wang at mediatek.com
From: Sean Wang <[email protected]>
add High-Speed DMA (HSDMA) nodes
Signed-off-by Sean Wang <[email protected]>
NAK. AFAIK the driver is not yest upstream
Regards,
Matthias
Quoted 26 lines
--- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)arch/arm64/boot/dts/mediatek/mt7622.dtsi +10
-0@@ -715,6 +715,16 @@ #reset-cells = <1>; }; + hsdma: dma-controller at 1b007000 { + compatible = "mediatek,mt7622-hsdma"; + reg = <0 0x1b007000 0 0x1000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETH_HSDMA_EN>; + clock-names = "hsdma"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + #dma-cells = <1>; + }; + eth: ethernet at 1b100000 { compatible = "mediatek,mt7622-eth", "mediatek,mt2701-eth",
Matthias Brugger
maintainerQuoted 21 lines · sean.wang at mediatek.com
From: Sean Wang <[email protected]>
Changes since v2:
- rebase to 4.16-rc1 and solve all conflicts
- add proper list Cc in patch 1
- add fixup in patch 4 in v2 with the uniform pinmux definition that is always adding property function before property groups
- add Acked-by from Philippe in patch 5
- add clock related property into all CPU nodes in patch 6
- merge patch 14 in v2 into patch 8 as this is where the node is defined in the first placeChanges since v1:
- add usb, thermal, HSDMA, mmc related nodes
- fix Warning (unit_address_vs_reg): Node /oscillator at 0 has a unit name, but no reg property in patch 2
- fix Warning (pci_bridge): Node /pcie at 1a140000/pcie at 0,0 missing bus-range for PCI bridge
- fix Warning (pci_bridge): Node /pcie at 1a140000/pcie at 1,0 missing bus-range for PCI bridge
- fix Warning (unit_address_format): Failed prerequisite 'pci_bridge'
Quoted 9 lines
- fix Warning (
pci_device_reg): Failed prerequisite 'pci_bridge'
- fix Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
- enhance commit log in patch 4
- use - instead of _ in DT node name in patch 4 and 6
- use SPDX-License-Identifier for newly added files in patch 5
- use proper #size-cells for spi nor nodes in patch 9
- remove currently no needed #address-cells and #size-cells in children nodes of spi nor in patch 9.
Pushed 2-13 and 15 to v4.16-next/dts64
Thanks a lot.
Matthias
Re: [PATCH v3 01/15] dt-bindings: clock: mediatek: add missing required #reset-cells
In reply to [email protected]Quoting sean.wang at mediatek.com (2018-02-17 11:54:36)
Quoted 6 lines
From: Sean Wang <[email protected]>
All ethsys, pciesys and ssusbsys internally include reset controller, so explicitly add back these missing cell definitions to related bindings and examples.
Quoted 7 lines
Signed-off-by Sean Wang <[email protected]>Cc Rob Herring <[email protected]>Cc Michael Turquette <[email protected]>Cc Stephen Boyd <[email protected]>Cc linux-clk at vger.kernel.orgReviewed-by Rob Herring <[email protected]>---
Matthias Brugger
maintainerRe: [PATCH v3 01/15] dt-bindings: clock: mediatek: add missing required #reset-cells
Quoted 15 lines · Stephen Boyd
Quoting sean.wang at mediatek.com (2018-02-17 11:54:36)
Quoted 6 lines
From: Sean Wang <[email protected]>
All ethsys, pciesys and ssusbsys internally include reset controller, so explicitly add back these missing cell definitions to related bindings and examples.
Quoted 7 lines
Signed-off-by Sean Wang <[email protected]>Cc Rob Herring <[email protected]>Cc Michael Turquette <[email protected]>Cc Stephen Boyd <[email protected]>Cc linux-clk at vger.kernel.orgReviewed-by Rob Herring <[email protected]>---
Quoted 2 lines
Acked-by Stephen Boyd <[email protected]>
added to v4.16-next/dts64
Thanks!