Skip to contentSkip to conversation

Implement get_multiple for ACCES and PC/104 drivers

PATCH In review William Breathitt Gray 2 participants 15 messages Mar 22, 2018 – Mar 26, 2018

Subsystems (8)
GPIO Acces 104-dio-48E GPIO driver Acces 104-idi-48 GPIO driver Winsystems WS16C48 GPIO driver +4 more subsystems
lore
Share & tools
lore

William Breathitt Gray

author
#0 lore raw

v4 cover Implement get_multiple for ACCES and PC/104 drivers

Changes in v4:
- Remove STX104 patch as it has been picked up through the IIO tree
- Utilize GENMASK for 104-IDIO-16 patch to avoid long literal bitmasks
- Fix off-by-one errors for port_mask initializations
- Add end comma to ports arrays initializations for consistency

This patchset implements get_multiple callbacks for the PC104 GPIO drivers as well as the PCI-IDIO-16 and PCIe-IDIO-24 GPIO drivers. These devices all acquire the multiple input lines with a single read, so utilizing the get_multiple callback can provide improvement for those users who regularly access multiple input lines.

While developing this patchset I noticed many of these devices make use of Intel 8255 compatible interfaces for their I/O. I may write a generic 8255 GPIO driver in the future to reduce some of the redundant code I see pop among the drivers for these devices.

William Breathitt Gray (7):
gpio: 104-idio-16: Implement get_multiple callback
gpio: pci-idio-16: Implement get_multiple callback
gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
gpio: 104-dio-48e: Implement get_multiple callback
gpio: 104-idi-48: Implement get_multiple callback
gpio: gpio-mm: Implement get_multiple callback
gpio: ws16c48: Implement get_multiple callback

 drivers/gpio/gpio-104-dio-48e.c  |  47 ++++++++++++++++
 drivers/gpio/gpio-104-idi-48.c   |  47 ++++++++++++++++
 drivers/gpio/gpio-104-idio-16.c  |  15 +++++
 drivers/gpio/gpio-gpio-mm.c      |  47 ++++++++++++++++
 drivers/gpio/gpio-pci-idio-16.c  |  50 +++++++++++++++++
 drivers/gpio/gpio-pcie-idio-24.c | 117 +++++++++++++++++++++++++++++++++++++++
 drivers/gpio/gpio-ws16c48.c      |  47 ++++++++++++++++
 7 files changed, 370 insertions(+)
Signature · 1 line
2.16.2
author
#1 lore raw

PATCH v4 1/7 gpio: 104-idio-16: Implement get_multiple callback

The ACCES I/O 104-IDIO-16 series of devices provides 16 optically-isolated digital inputs accessed via two 8-bit ports. Since eight input lines are acquired on a single port input read, the 104-IDIO-16 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idio_16_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-104-idio-16.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
drivers/gpio/gpio-104-idio-16.c +15 -0
index 2f16638a0589..96700308c1e3 100644
@@ -90,6 +90,20 @@ static int idio_16_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return !!(inb(idio16gpio->base + 5) & (mask>>8));
 }
 
+static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+
+	*bits = 0;
+	if (*mask & GENMASK(23, 16))
+		*bits |= (unsigned long)inb(idio16gpio->base + 1) << 16;
+	if (*mask & GENMASK(31, 24))
+		*bits |= (unsigned long)inb(idio16gpio->base + 5) << 24;
+
+	return 0;
+}
+
 static void idio_16_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);

@@ -244,6 +258,7 @@ static int idio_16_probe(struct device *dev, unsigned int id)
 	idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
 	idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
 	idio16gpio->chip.get = idio_16_gpio_get;
+	idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple;
 	idio16gpio->chip.set = idio_16_gpio_set;
 	idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
 	idio16gpio->base = base[id];
Signature · 1 line
2.16.2
#2 lore raw

Re: [PATCH v4 1/7] gpio: 104-idio-16: Implement get_multiple callback

Quoted 9 lines · William Breathitt Gray

The ACCES I/O 104-IDIO-16 series of devices provides 16 optically-isolated digital inputs accessed via two 8-bit ports. Since eight input lines are acquired on a single port input read, the 104-IDIO-16 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idio_16_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>

Patch applied.

Yours,
Linus Walleij

author
#3 lore raw

PATCH v4 2/7 gpio: pci-idio-16: Implement get_multiple callback

In reply to William Breathitt Gray

The ACCES I/O PCI-IDIO-16 series of devices provides 16 optically-isolated digital inputs accessed via two 8-bit ports. Since eight input lines are acquired on a single port input read, the PCI-IDIO-16 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idio_16_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-pci-idio-16.c | 50 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
drivers/gpio/gpio-pci-idio-16.c +50 -0
index 57d1b7fbf07b..1948724d8c36 100644
@@ -11,6 +11,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -103,6 +104,54 @@ static int idio_16_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(ioread8(&idio16gpio->reg->in8_15) & (mask >> 24));
 }
 
+static int idio_16_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(chip);
+	size_t i;
+	const unsigned int gpio_reg_size = 8;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+	unsigned long port_state;
+	u8 __iomem ports[] = {
+		idio16gpio->reg->out0_7, idio16gpio->reg->out8_15,
+		idio16gpio->reg->in0_7, idio16gpio->reg->in8_15,
+	};
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port */
+		port_state = ioread8(ports + i);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void idio_16_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	int value)
 {

@@ -299,6 +348,7 @@ static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	idio16gpio->chip.direction_input = idio_16_gpio_direction_input;
 	idio16gpio->chip.direction_output = idio_16_gpio_direction_output;
 	idio16gpio->chip.get = idio_16_gpio_get;
+	idio16gpio->chip.get_multiple = idio_16_gpio_get_multiple;
 	idio16gpio->chip.set = idio_16_gpio_set;
 	idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
Signature · 1 line
2.16.2
#4 lore raw

Re: [PATCH v4 2/7] gpio: pci-idio-16: Implement get_multiple callback

Quoted 9 lines · William Breathitt Gray

The ACCES I/O PCI-IDIO-16 series of devices provides 16 optically-isolated digital inputs accessed via two 8-bit ports. Since eight input lines are acquired on a single port input read, the PCI-IDIO-16 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idio_16_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>

Patch applied.

Yours,
Linus Walleij

author
#5 lore raw

PATCH v4 3/7 gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks

In reply to William Breathitt Gray

The ACCES I/O PCIe-IDIO-24 series of devices provides 24 optically-isolated digital I/O accessed via six 8-bit ports. Since eight input lines are acquired on a single port input read -- and similarly eight output lines are set on a single port output write -- the PCIe-IDIO-24 GPIO driver may improve multiple I/O reads/writes by utilizing a get_multiple/set_multiple callbacks. This patch implements the idio_24_gpio_get_multiple function which serves as the respective get_multiple callback, and implements the idio_24_gpio_set_multiple function which serves as the respective set_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-pcie-idio-24.c | 117 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 117 insertions(+)
drivers/gpio/gpio-pcie-idio-24.c +117 -0
index f666e2e69074..835607ecf658 100644
@@ -15,6 +15,7 @@
  * This driver supports the following ACCES devices: PCIe-IDIO-24,
  * PCIe-IDI-24, PCIe-IDO-24, and PCIe-IDIO-12.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -193,6 +194,61 @@ static int idio_24_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(ioread8(&idio24gpio->reg->ttl_in0_7) & offset_mask);
 }
 
+static int idio_24_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	size_t i;
+	const unsigned int gpio_reg_size = 8;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+	unsigned long port_state;
+	u8 __iomem ports[] = {
+		idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
+		idio24gpio->reg->out16_23, idio24gpio->reg->in0_7,
+		idio24gpio->reg->in8_15, idio24gpio->reg->in16_23,
+	};
+	const unsigned long out_mode_mask = BIT(1);
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port (port 6 is TTL GPIO) */
+		if (i < 6)
+			port_state = ioread8(ports + i);
+		else if (ioread8(&idio24gpio->reg->ctl) & out_mode_mask)
+			port_state = ioread8(&idio24gpio->reg->ttl_out0_7);
+		else
+			port_state = ioread8(&idio24gpio->reg->ttl_in0_7);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	int value)
 {

@@ -234,6 +290,65 @@ static void idio_24_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
 }
 
+static void idio_24_gpio_set_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct idio_24_gpio *const idio24gpio = gpiochip_get_data(chip);
+	size_t i;
+	unsigned long bits_offset;
+	unsigned long gpio_mask;
+	const unsigned int gpio_reg_size = 8;
+	const unsigned long port_mask = GENMASK(gpio_reg_size, 0);
+	unsigned long flags;
+	unsigned int out_state;
+	u8 __iomem ports[] = {
+		idio24gpio->reg->out0_7, idio24gpio->reg->out8_15,
+		idio24gpio->reg->out16_23
+	};
+	const unsigned long out_mode_mask = BIT(1);
+	const unsigned int ttl_offset = 48;
+	const size_t ttl_i = BIT_WORD(ttl_offset);
+	const unsigned int word_offset = ttl_offset % BITS_PER_LONG;
+	const unsigned long ttl_mask = (mask[ttl_i] >> word_offset) & port_mask;
+	const unsigned long ttl_bits = (bits[ttl_i] >> word_offset) & ttl_mask;
+
+	/* set bits are processed a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* check if any set bits for current port */
+		gpio_mask = (*mask >> bits_offset) & port_mask;
+		if (!gpio_mask) {
+			/* no set bits for this port so move on to next port */
+			continue;
+		}
+
+		raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+		/* process output lines */
+		out_state = ioread8(ports + i) & ~gpio_mask;
+		out_state |= (*bits >> bits_offset) & gpio_mask;
+		iowrite8(out_state, ports + i);
+
+		raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+	}
+
+	/* check if setting TTL lines and if they are in output mode */
+	if (!ttl_mask || !(ioread8(&idio24gpio->reg->ctl) & out_mode_mask))
+		return;
+
+	/* handle TTL output */
+	raw_spin_lock_irqsave(&idio24gpio->lock, flags);
+
+	/* process output lines */
+	out_state = ioread8(&idio24gpio->reg->ttl_out0_7) & ~ttl_mask;
+	out_state |= ttl_bits;
+	iowrite8(out_state, &idio24gpio->reg->ttl_out0_7);
+
+	raw_spin_unlock_irqrestore(&idio24gpio->lock, flags);
+}
+
 static void idio_24_irq_ack(struct irq_data *data)
 {
 }

@@ -397,7 +512,9 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	idio24gpio->chip.direction_input = idio_24_gpio_direction_input;
 	idio24gpio->chip.direction_output = idio_24_gpio_direction_output;
 	idio24gpio->chip.get = idio_24_gpio_get;
+	idio24gpio->chip.get_multiple = idio_24_gpio_get_multiple;
 	idio24gpio->chip.set = idio_24_gpio_set;
+	idio24gpio->chip.set_multiple = idio_24_gpio_set_multiple;
 
 	raw_spin_lock_init(&idio24gpio->lock);
Signature · 1 line
2.16.2
#6 lore raw

Re: [PATCH v4 3/7] gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks

Quoted 11 lines · William Breathitt Gray

The ACCES I/O PCIe-IDIO-24 series of devices provides 24 optically-isolated digital I/O accessed via six 8-bit ports. Since eight input lines are acquired on a single port input read -- and similarly eight output lines are set on a single port output write -- the PCIe-IDIO-24 GPIO driver may improve multiple I/O reads/writes by utilizing a get_multiple/set_multiple callbacks. This patch implements the idio_24_gpio_get_multiple function which serves as the respective get_multiple callback, and implements the idio_24_gpio_set_multiple function which serves as the respective set_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>

Patch applied.

Yours,
Linus Walleij

author
#7 lore raw

PATCH v4 4/7 gpio: 104-dio-48e: Implement get_multiple callback

In reply to William Breathitt Gray

The ACCES I/O 104-DIO-48E series of devices contain two Programmable Peripheral Interface (PPI) chips of type 82C55, which each feature three 8-bit ports of I/O. Since eight input lines are acquired on a single port input read, the 104-DIO-48E GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the dio48e_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-104-dio-48e.c | 47 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
drivers/gpio/gpio-104-dio-48e.c +47 -0
index bab3b94c5cbc..31e22c93e844 100644
@@ -14,6 +14,7 @@
  * This driver supports the following ACCES devices: 104-DIO-48E and
  * 104-DIO-24E.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -182,6 +183,51 @@ static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return !!(port_state & mask);
 }
 
+static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
+	size_t i;
+	const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+	const unsigned int gpio_reg_size = 8;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port */
+		port_state = inb(dio48egpio->base + ports[i]);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);

@@ -384,6 +430,7 @@ static int dio48e_probe(struct device *dev, unsigned int id)
 	dio48egpio->chip.direction_input = dio48e_gpio_direction_input;
 	dio48egpio->chip.direction_output = dio48e_gpio_direction_output;
 	dio48egpio->chip.get = dio48e_gpio_get;
+	dio48egpio->chip.get_multiple = dio48e_gpio_get_multiple;
 	dio48egpio->chip.set = dio48e_gpio_set;
 	dio48egpio->chip.set_multiple = dio48e_gpio_set_multiple;
 	dio48egpio->base = base[id];
Signature · 1 line
2.16.2
author
#8 lore raw

PATCH v4 5/7 gpio: 104-idi-48: Implement get_multiple callback

In reply to William Breathitt Gray

The ACCES I/O 104-IDI-48 series of devices provides 48 optically-isolated inputs accessed via six 8-bit ports. Since eight input lines are acquired on a single port input read, the 104-IDI-48 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idi_48_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-104-idi-48.c | 47 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
drivers/gpio/gpio-104-idi-48.c +47 -0
index add859d59766..f35632609379 100644
@@ -14,6 +14,7 @@
  * This driver supports the following ACCES devices: 104-IDI-48A,
  * 104-IDI-48AC, 104-IDI-48B, and 104-IDI-48BC.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -88,6 +89,51 @@ static int idi_48_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int idi_48_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct idi_48_gpio *const idi48gpio = gpiochip_get_data(chip);
+	size_t i;
+	const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+	const unsigned int gpio_reg_size = 8;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port */
+		port_state = inb(idi48gpio->base + ports[i]);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void idi_48_irq_ack(struct irq_data *data)
 {
 }

@@ -256,6 +302,7 @@ static int idi_48_probe(struct device *dev, unsigned int id)
 	idi48gpio->chip.get_direction = idi_48_gpio_get_direction;
 	idi48gpio->chip.direction_input = idi_48_gpio_direction_input;
 	idi48gpio->chip.get = idi_48_gpio_get;
+	idi48gpio->chip.get_multiple = idi_48_gpio_get_multiple;
 	idi48gpio->base = base[id];
 
 	raw_spin_lock_init(&idi48gpio->lock);
Signature · 1 line
2.16.2
#9 lore raw

Re: [PATCH v4 5/7] gpio: 104-idi-48: Implement get_multiple callback

Quoted 8 lines · William Breathitt Gray

The ACCES I/O 104-IDI-48 series of devices provides 48 optically-isolated inputs accessed via six 8-bit ports. Since eight input lines are acquired on a single port input read, the 104-IDI-48 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the idi_48_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>

Patch applied.

Yours,
Linus Walleij

author
#10 lore raw

PATCH v4 6/7 gpio: gpio-mm: Implement get_multiple callback

In reply to William Breathitt Gray

The Diamond Systems GPIO-MM series of devices contain two 82C55A devices, which each feature three 8-bit ports of I/O. Since eight input lines are acquired on a single port input read, the GPIO-MM GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the gpiomm_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-gpio-mm.c | 47 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
drivers/gpio/gpio-gpio-mm.c +47 -0
index 11ade5b288f8..d496cc56c2a2 100644
@@ -14,6 +14,7 @@
  * This driver supports the following Diamond Systems devices: GPIO-MM and
  * GPIO-MM-12.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -171,6 +172,51 @@ static int gpiomm_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(port_state & mask);
 }
 
+static int gpiomm_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct gpiomm_gpio *const gpiommgpio = gpiochip_get_data(chip);
+	size_t i;
+	const size_t ports[] = { 0, 1, 2, 4, 5, 6 };
+	const unsigned int gpio_reg_size = 8;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < ARRAY_SIZE(ports); i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port */
+		port_state = inb(gpiommgpio->base + ports[i]);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void gpiomm_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	int value)
 {

@@ -268,6 +314,7 @@ static int gpiomm_probe(struct device *dev, unsigned int id)
 	gpiommgpio->chip.direction_input = gpiomm_gpio_direction_input;
 	gpiommgpio->chip.direction_output = gpiomm_gpio_direction_output;
 	gpiommgpio->chip.get = gpiomm_gpio_get;
+	gpiommgpio->chip.get_multiple = gpiomm_gpio_get_multiple;
 	gpiommgpio->chip.set = gpiomm_gpio_set;
 	gpiommgpio->chip.set_multiple = gpiomm_gpio_set_multiple;
 	gpiommgpio->base = base[id];
Signature · 1 line
2.16.2
#11 lore raw

Re: [PATCH v4 6/7] gpio: gpio-mm: Implement get_multiple callback

Quoted 8 lines · William Breathitt Gray

The Diamond Systems GPIO-MM series of devices contain two 82C55A devices, which each feature three 8-bit ports of I/O. Since eight input lines are acquired on a single port input read, the GPIO-MM GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the gpiomm_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>

Patch applied.

Yours,
Linus Walleij

author
#12 lore raw

PATCH v4 7/7 gpio: ws16c48: Implement get_multiple callback

In reply to William Breathitt Gray

The WinSystems WS16C48 device provides 48 lines of digital I/O accessed via six 8-bit ports. Since eight input lines are acquired on a single port input read, the WS16C48 GPIO driver may improve multiple input reads by utilizing a get_multiple callback. This patch implements the ws16c48_gpio_get_multiple function which serves as the respective get_multiple callback.

Signed-off-by William Breathitt Gray <[email protected]>
---
 drivers/gpio/gpio-ws16c48.c | 47 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)
drivers/gpio/gpio-ws16c48.c +47 -0
index 746648244bf3..c7028eb0b8e1 100644
@@ -11,6 +11,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  */
+#include <linux/bitmap.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/errno.h>

@@ -129,6 +130,51 @@ static int ws16c48_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return !!(port_state & mask);
 }
 
+static int ws16c48_gpio_get_multiple(struct gpio_chip *chip,
+	unsigned long *mask, unsigned long *bits)
+{
+	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);
+	const unsigned int gpio_reg_size = 8;
+	size_t i;
+	const size_t num_ports = chip->ngpio / gpio_reg_size;
+	unsigned int bits_offset;
+	size_t word_index;
+	unsigned int word_offset;
+	unsigned long word_mask;
+	const unsigned long port_mask = GENMASK(gpio_reg_size - 1, 0);
+	unsigned long port_state;
+
+	/* clear bits array to a clean slate */
+	bitmap_zero(bits, chip->ngpio);
+
+	/* get bits are evaluated a gpio port register at a time */
+	for (i = 0; i < num_ports; i++) {
+		/* gpio offset in bits array */
+		bits_offset = i * gpio_reg_size;
+
+		/* word index for bits array */
+		word_index = BIT_WORD(bits_offset);
+
+		/* gpio offset within current word of bits array */
+		word_offset = bits_offset % BITS_PER_LONG;
+
+		/* mask of get bits for current gpio within current word */
+		word_mask = mask[word_index] & (port_mask << word_offset);
+		if (!word_mask) {
+			/* no get bits in this port so skip to next one */
+			continue;
+		}
+
+		/* read bits from current gpio port */
+		port_state = inb(ws16c48gpio->base + i);
+
+		/* store acquired bits at respective bits array offset */
+		bits[word_index] |= port_state << word_offset;
+	}
+
+	return 0;
+}
+
 static void ws16c48_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(chip);

@@ -383,6 +429,7 @@ static int ws16c48_probe(struct device *dev, unsigned int id)
 	ws16c48gpio->chip.direction_input = ws16c48_gpio_direction_input;
 	ws16c48gpio->chip.direction_output = ws16c48_gpio_direction_output;
 	ws16c48gpio->chip.get = ws16c48_gpio_get;
+	ws16c48gpio->chip.get_multiple = ws16c48_gpio_get_multiple;
 	ws16c48gpio->chip.set = ws16c48_gpio_set;
 	ws16c48gpio->chip.set_multiple = ws16c48_gpio_set_multiple;
 	ws16c48gpio->base = base[id];
Signature · 1 line
2.16.2
#13 lore raw
In reply to William Breathitt Gray
Quoted 1 line · William Breathitt Gray

Changes in v4:

I applied the v4 patch set so we get some rotation in linux-next before the merge window.

If reviewers still find smallish issues they can certainly be fixed in follow-up patches.

Quoted 5 lines

This patchset implements get_multiple callbacks for the PC104 GPIO drivers as well as the PCI-IDIO-16 and PCIe-IDIO-24 GPIO drivers. These devices all acquire the multiple input lines with a single read, so utilizing the get_multiple callback can provide improvement for those users who regularly access multiple input lines.

Did you use the userspace chardev for some interesting experiments with your set-ups?

I tend to think of your applications as pretty interesting for industry peers, and a good proof-of-concept for the userspace API.

Quoted 4 lines

While developing this patchset I noticed many of these devices make use of Intel 8255 compatible interfaces for their I/O. I may write a generic 8255 GPIO driver in the future to reduce some of the redundant code I see pop among the drivers for these devices.

Oh!
This guy?
https://en.wikipedia.org/wiki/Intel_8255

Yeah that makes all kind of sense. We are living with the legacy of the first PCs every day when it comes own to EISA & friends...

Yours,
Linus Walleij

author
#14 lore raw
Quoted 17 lines · Linus Walleij
Quoted 1 line · William Breathitt Gray

Changes in v4:

I applied the v4 patch set so we get some rotation in linux-next before the merge window.

If reviewers still find smallish issues they can certainly be fixed in follow-up patches.

Quoted 5 lines

This patchset implements get_multiple callbacks for the PC104 GPIO drivers as well as the PCI-IDIO-16 and PCIe-IDIO-24 GPIO drivers. These devices all acquire the multiple input lines with a single read, so utilizing the get_multiple callback can provide improvement for those users who regularly access multiple input lines.

Quoted 5 lines

Did you use the userspace chardev for some interesting experiments with your set-ups?

I tend to think of your applications as pretty interesting for industry peers, and a good proof-of-concept for the userspace API.

I use these PC104 drivers in several semi-realtime critical applications, so latency has always been a big concern for me. The switch from sysfs file I/O to chardev ioctl had a great improvement in the reduction of latency, which I was very happy to utilize.

Since the next big point of latency in my systems have been port I/O, taking advantage of the get_multiple/set_multiple functionality is my next goal in optimization. I have a new system coming out soon that uses the 104-IDI-48 for input -- it'll be interesting to see the performance improvements of acquiring the entire input port at a time, rather than every GPIO line individually.

Quoted 6 lines
Quoted 5 lines

While developing this patchset I noticed many of these devices make use of Intel 8255 compatible interfaces for their I/O. I may write a generic 8255 GPIO driver in the future to reduce some of the redundant code I see pop among the drivers for these devices.

Quoted 6 lines

Oh!
This guy?
https://en.wikipedia.org/wiki/Intel_8255

Yeah that makes all kind of sense. We are living with the legacy of the first PCs every day when it comes own to EISA & friends...

That's the one! I see this interface a lot in the GPIO devices I handle. It's very popular, which I believe is a testament to the popularity of the IBM PC.

Nowadays, most devices I encounter implement this interface in an FPGA, but I do occasionally come across the actual Intel 82C55 chip, such as on the 104-DIO-48E; it's fascinating to see this physical chip still popping up on circuit boards from time to time.

I would like to make a generic driver for this interface that will allow it to be used both in the port I/O and memory I/O drivers out there. Since I don't want to introduce too many changes in a single patchset I've postponed it for now to get get_multiple support merged in for these drivers, but I'll hopefully have something like a gpio-i8255 driver submitted soon enough.

William Breathitt Gray

Quoted 3 lines

Yours,
Linus Walleij