Fix TX Timeout and implement Safety Features
Subsystems (4)
v2 cover Fix TX Timeout and implement Safety Features
Fix the TX Timeout handler to correctly reconfigure the whole system and start implementing features for DWMAC5 cores, specifically the Safety Features.
Changes since v1:
- Display error stats in ethtool
Jose Abreu (2):
net: stmmac: Rework and fix TX Timeout code
net: stmmac: Add support for DWMAC5 and implement Safety Features
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +- drivers/net/ethernet/stmicro/stmmac/common.h | 22 ++ drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 4 + drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 39 ++- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 6 + drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 298 +++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 52 ++++ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 12 + .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 39 ++- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 101 ++++++- 10 files changed, 567 insertions(+), 8 deletions(-) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac5.c create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac5.h
Signature · 1 line
2.9.3
PATCH v2 1/2 net: stmmac: Rework and fix TX Timeout code
Currently TX Timeout handler does not behaves as expected and leads to an unrecoverable state. Rework current implementation of TX Timeout handling to actually perform a complete reset of the driver state and IP.
We use deferred work to init a task which will be responsible for resetting the system.
--- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 11 ++++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 67 +++++++++++++++++++++-- 2 files changed, 73 insertions(+), 5 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac.h +11 -0
@@ -145,6 +145,17 @@ struct stmmac_priv {struct dentry *dbgfs_rings_status;struct dentry *dbgfs_dma_cap;#endif + +unsigned long state; +struct workqueue_struct *wq; +struct work_struct service_task; +}; + +enum stmmac_state { +STMMAC_DOWN , +STMMAC_RESET_REQUESTED , +STMMAC_RESETING , +STMMAC_SERVICE_SCHED , };int stmmac_mdio_unregister (struct net_device *ndev);
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +62 -5
110 lines not on this page · raw message
Signature · 1 line
2.9.3
PATCH v2 2/2 net: stmmac: Add support for DWMAC5 and implement Safety Features
In reply to Jose AbreuThis adds initial suport for DWMAC5 and implements the Automotive Safety Package which is available from core version 5.10.
The Automotive Safety Pacakge (also called Safety Features) offers us with error protection in the core by implementing ECC Protection in memories, on-chip data path parity protection, FSM parity and timeout protection and Application/CSR interface timeout protection.
In case of an uncorrectable error we call stmmac_global_err() and reconfigure the whole core.
--- drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +- drivers/net/ethernet/stmicro/stmmac/common.h | 22 ++ drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 4 + drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 39 ++- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 6 + drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 298 +++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 52 ++++ drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 39 ++- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 34 +++ 10 files changed, 494 insertions(+), 3 deletions(-) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac5.c create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/Makefile +1 -1
@@ -4,7 +4,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \ chain_mode.o dwmac_lib.o dwmac1000_core.o dwmac1000_dma.o \ dwmac100_core.o dwmac100_dma.o enh_desc.o norm_desc.o \ mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o dwmac4_descs.o \ - dwmac4_dma.o dwmac4_lib.o dwmac4_core.o $(stmmac-y) + dwmac4_dma.o dwmac4_lib.o dwmac4_core.o dwmac5.o $(stmmac-y) # Ordering matters. Generic driver must be last. obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
drivers/net/ethernet/stmicro/stmmac/common.h +22 -0
@@ -38,6 +38,8 @@#define DWMAC_CORE_3_40 0x34#define DWMAC_CORE_3_50 0x35#define DWMAC_CORE_4_00 0x40 +#define DWMAC_CORE_5_00 0x50 +#define DWMAC_CORE_5_10 0x51#define STMMAC_CHAN0 0/* Always supported and default for all chips */ /* These need to be power of two, and >= 4 */
@@ -174,6 +176,17 @@ struct stmmac_extra_stats {unsigned long tx_tso_nfrags; }; +/* Safety Feature statistics exposed by ethtool */ +struct stmmac_safety_stats { +unsigned long mac_errors[32 ]; +unsigned long mtl_errors[32 ]; +unsigned long dma_errors[32 ]; +}; + +/* Number of fields in Safety Stats */ +#define STMMAC_SAFETY_FEAT_SIZE \ + (sizeof(struct stmmac_safety_stats) / sizeof(unsigned long)) +/* CSR Frequency Access Defines*/ #define CSR_F_35M 35000000#define CSR_F_60M 60000000
@@ -336,6 +349,8 @@ struct dma_features {/* TX and RX FIFO sizes */ unsigned int tx_fifo_size;unsigned int rx_fifo_size; +/* Automotive Safety Package */ +unsigned int asp; };/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
@@ -532,6 +547,13 @@ struct stmmac_ops { bool loopback);void (*pcs_rane)(void __iomem *ioaddr,bool restart);void (*pcs_get_adv_lp)(void __iomem *ioaddr,struct rgmii_adv *adv); +/* Safety Features */ +int (*safety_feat_config)(void __iomem *ioaddr,unsigned int asp); +bool (*safety_feat_irq_status)(struct net_device *ndev, +void __iomem *ioaddr,unsigned int asp, +struct stmmac_safety_stats *stats); +const char *(*safety_feat_dump)(struct stmmac_safety_stats *stats, +int index,unsigned long *count); };/* PTP and HW Timer helpers */
drivers/net/ethernet/stmicro/stmmac/dwmac4.h +4 -0
@@ -39,6 +39,7 @@#define GMAC_HW_FEATURE0 0x0000011c#define GMAC_HW_FEATURE1 0x00000120#define GMAC_HW_FEATURE2 0x00000124 +#define GMAC_HW_FEATURE3 0x00000128#define GMAC_MDIO_ADDR 0x00000200#define GMAC_MDIO_DATA 0x00000204#define GMAC_ADDR_HIGH (reg) (0x300 + reg * 8)
@@ -192,6 +193,9 @@ enum power_event {#define GMAC_HW_FEAT_TXQCNT GENMASK(9, 6)#define GMAC_HW_FEAT_RXQCNT GENMASK(3, 0) +/* MAC HW features3 bitmap */ +#define GMAC_HW_FEAT_ASP GENMASK(29, 28) +/* MAC HW ADDR regs */ #define GMAC_HI_DCS GENMASK(18, 16)#define GMAC_HI_DCS_SHIFT 16
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +38 -1
@@ -20,6 +20,7 @@#include <net/dsa.h> #include "stmmac_pcs.h" #include "dwmac4.h" +#include "dwmac5.h" static void dwmac4_core_init (struct mac_device_info *hw,struct net_device *dev)
@@ -768,6 +769,40 @@ static const struct stmmac_ops dwmac410_ops = { .set_filter = dwmac4_set_filter, }; +static const struct stmmac_ops dwmac510_ops = { + .core_init = dwmac4_core_init, + .set_mac = stmmac_dwmac4_set_mac, + .rx_ipc = dwmac4_rx_ipc_enable, + .rx_queue_enable = dwmac4_rx_queue_enable, + .rx_queue_prio = dwmac4_rx_queue_priority, + .tx_queue_prio = dwmac4_tx_queue_priority, + .rx_queue_routing = dwmac4_rx_queue_routing, + .prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms, + .prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms, + .set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight, + .map_mtl_to_dma = dwmac4_map_mtl_dma, + .config_cbs = dwmac4_config_cbs, + .dump_regs = dwmac4_dump_regs, + .host_irq_status = dwmac4_irq_status, + .host_mtl_irq_status = dwmac4_irq_mtl_status, + .flow_ctrl = dwmac4_flow_ctrl, + .pmt = dwmac4_pmt, + .set_umac_addr = dwmac4_set_umac_addr, + .get_umac_addr = dwmac4_get_umac_addr, + .set_eee_mode = dwmac4_set_eee_mode, + .reset_eee_mode = dwmac4_reset_eee_mode, + .set_eee_timer = dwmac4_set_eee_timer, + .set_eee_pls = dwmac4_set_eee_pls, + .pcs_ctrl_ane = dwmac4_ctrl_ane, + .pcs_rane = dwmac4_rane, + .pcs_get_adv_lp = dwmac4_get_adv_lp, + .debug = dwmac4_debug, + .set_filter = dwmac4_set_filter, + .safety_feat_config = dwmac5_safety_feat_config, + .safety_feat_irq_status = dwmac5_safety_feat_irq_status, + .safety_feat_dump = dwmac5_safety_feat_dump, +}; +struct mac_device_info *dwmac4_setup (void __iomem *ioaddr,int mcbins,int perfect_uc_entries,int *synopsys_id) {
@@ -808,7 +843,9 @@ struct mac_device_info *dwmac4_setup(void __iomem *ioaddr, int mcbins,else mac->dma = &dwmac4_dma_ops; -if (*synopsys_id >=DWMAC_CORE_4_00 ) +if (*synopsys_id >=DWMAC_CORE_5_10 ) + mac->mac = &dwmac510_ops; +else if (*synopsys_id >=DWMAC_CORE_4_00 ) mac->mac = &dwmac410_ops;else mac->mac = &dwmac4_ops;
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +6 -0
@@ -373,6 +373,12 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,/* IEEE 1588-2002 */ dma_cap->time_stamp =0 ; + +/* MAC HW feature3 */ + hw_cap =readl (ioaddr +GMAC_HW_FEATURE3 ); + +/* 5.10 Features */ + dma_cap->asp = (hw_cap &GMAC_HW_FEAT_ASP ) >>28 ; }/* Enable/disable TSO feature and set MSS */
drivers/net/ethernet/stmicro/stmmac/dwmac5.c new file +298 -0
298 lines not on this page · raw message
drivers/net/ethernet/stmicro/stmmac/dwmac5.h new file +52 -0
52 lines not on this page · raw message
drivers/net/ethernet/stmicro/stmmac/stmmac.h +1 -0
@@ -114,6 +114,7 @@ struct stmmac_priv {int mii_irq[PHY_MAX_ADDR ];struct stmmac_extra_stats xstats____cacheline_aligned_in_smp ; +struct stmmac_safety_stats sstats;struct plat_stmmacenet_data *plat;struct dma_features dma_cap;struct stmmac_counters mmc;
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +38 -1
@@ -523,11 +523,23 @@ stmmac_set_pauseparam(struct net_device *netdev,static void stmmac_get_ethtool_stats (struct net_device *dev,struct ethtool_stats *dummy,u64 *data) { +const char *(*dump)(struct stmmac_safety_stats *stats,int index, +unsigned long *count);struct stmmac_priv *priv =netdev_priv (dev);u32 rx_queues_count = priv->plat->rx_queues_to_use;u32 tx_queues_count = priv->plat->tx_queues_to_use; +unsigned long count;int i, j =0 ; +if (priv->dma_cap.asp && priv->hw->mac->safety_feat_dump) { + dump = priv->hw->mac->safety_feat_dump; + +for (i =0 ; i <STMMAC_SAFETY_FEAT_SIZE ; i++) { +if (dump (&priv->sstats, i, &count)) + data[j++] = count; + } + } +/* Update the DMA HW counters for dwmac10/100 */ if (priv->hw->dma->dma_diagnostic_fr) priv->hw->dma->dma_diagnostic_fr(&dev->stats,
@@ -569,7 +581,9 @@ static void stmmac_get_ethtool_stats(struct net_device *dev,static int stmmac_get_sset_count (struct net_device *netdev,int sset) {struct stmmac_priv *priv =netdev_priv (netdev); -int len; +const char *(*dump)(struct stmmac_safety_stats *stats,int index, +unsigned long *count); +int i, len, safety_len =0 ;switch (sset) {case ETH_SS_STATS :
@@ -577,6 +591,16 @@ static int stmmac_get_sset_count(struct net_device *netdev, int sset)if (priv->dma_cap.rmon) len +=STMMAC_MMC_STATS_LEN ; +if (priv->dma_cap.asp && priv->hw->mac->safety_feat_dump) { + dump = priv->hw->mac->safety_feat_dump; + +for (i =0 ; i <STMMAC_SAFETY_FEAT_SIZE ; i++) { +if (dump (&priv->sstats, i,NULL )) + safety_len++; + } + + len += safety_len; + }return len;default :
@@ -589,9 +613,22 @@ static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)int i;u8 *p = data;struct stmmac_priv *priv =netdev_priv (dev); +const char *(*dump)(struct stmmac_safety_stats *stats,int index, +unsigned long *count);switch (stringset) {case ETH_SS_STATS : +if (priv->dma_cap.asp && priv->hw->mac->safety_feat_dump) { + dump = priv->hw->mac->safety_feat_dump; +for (i =0 ; i <STMMAC_SAFETY_FEAT_SIZE ; i++) { +const char *desc =dump (&priv->sstats, i,NULL ); + +if (desc) { +memcpy (p, desc,ETH_GSTRING_LEN ); + p +=ETH_GSTRING_LEN ; + } + } + }if (priv->dma_cap.rmon)for (i =0 ; i <STMMAC_MMC_STATS_LEN ; i++) { memcpy(p, stmmac_mmc[i].stat_string,
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +34 -0
@@ -2014,6 +2014,22 @@ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode, } } +static bool stmmac_safety_feat_interrupt (struct stmmac_priv *priv) +{ +bool ret = false; + +/* Safety features are only available in cores >= 5.10 */ +if (priv->synopsys_id <DWMAC_CORE_5_10 ) +return ret; +if (priv->hw->mac->safety_feat_irq_status) + ret = priv->hw->mac->safety_feat_irq_status (priv->dev, + priv->ioaddr, priv->dma_cap.asp, &priv->sstats); + +if (ret) +stmmac_global_err (priv); +return ret; +} +/** * stmmac_dma_interrupt - DMA ISR * @priv: driver private structure
@@ -2503,6 +2519,17 @@ static void stmmac_mtl_configuration(struct stmmac_priv *priv)stmmac_mac_config_rx_queues_routing (priv); } +static void stmmac_safety_feat_configuration (struct stmmac_priv *priv) +{ +if (priv->hw->mac->safety_feat_config && priv->dma_cap.asp) { +netdev_info (priv->dev,"Enabling Safety Features\n" ); + priv->hw->mac->safety_feat_config (priv->ioaddr, + priv->dma_cap.asp); + }else { +netdev_info (priv->dev,"No Safety Features support found\n" ); + } +} +/** * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure.
@@ -2554,6 +2581,10 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)if (priv->synopsys_id >=DWMAC_CORE_4_00 )stmmac_mtl_configuration (priv); +/* Initialize Safety Features */ +if (priv->synopsys_id >=DWMAC_CORE_5_10 ) +stmmac_safety_feat_configuration (priv); + ret = priv->hw->mac->rx_ipc (priv->hw);if (!ret) {netdev_warn (priv->dev,"RX IPC Checksum Offload disabled\n" );
@@ -3729,6 +3760,9 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)/* Check if adapter is up */ if (test_bit (STMMAC_DOWN , &priv->state))return IRQ_HANDLED ; +/* Check if a fatal error happened */ +if (stmmac_safety_feat_interrupt (priv)) +return IRQ_HANDLED ;/* To handle GMAC own interrupts */ if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {
Signature · 1 line
2.9.3
David Miller
maintainerFrom: Jose Abreu <[email protected]>
Date: Thu, 29 Mar 2018 10:40:17 +0100
Quoted 6 lines
Fix the TX Timeout handler to correctly reconfigure the whole system and start implementing features for DWMAC5 cores, specifically the Safety Features.
Changes since v1:
- Display error stats in ethtool
Series applied, thanks.