Align U-Boot I2C DM bus ID handling with Linux
Subsystems (3)
cover Align U-Boot I2C DM bus ID handling with Linux
U-Boot with I2C_DM enabled is not capable to list i2c busses connected to i2c mux. For getting this work there is a need to find out highest alias ID and use this uniq number for new buses connected to I2C mux. This series is making this happen.
There is only one missing piece which is that also i2c controllers which are not listed in DT are not using this feature.
For getting this work it would be necessary to setup dev->req_seq in pre_bind function.
int i2c_pre_bind(struct udevice *dev)
{
if (dev->req_seq == -1) {
dev->req_seq = ++i2c_highest_id;
}
return 0;
}It can be done also in post_bind but it looks quite weird that controller has highest ID then i2c-mux sub-buses connected to it. For example:
ZynqMP> i2c bus
Bus 3: i2c at ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 0: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 1: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 17: i2c at ff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 4: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 3
...
That's why I think it would be better to introduce pre_bind hooks and call it in device_bind_common() before binding childs.
Thanks,
Michal
Michal Simek (4):
dm: core: Add of_alias_get_highest_id()
fdt: Introduce fdtdec_get_alias_highest_id()
i2c: dm: Record maximum id of devices before probing devices
i2c: mux: Add support for not listed sub-buses
drivers/core/of_access.c | 18 ++++++++++++++++++ drivers/i2c/i2c-uclass.c | 19 +++++++++++++++++++ drivers/i2c/muxes/i2c-mux-uclass.c | 35 +++++++++++++++++++++++++++++++++-- include/dm/of_access.h | 9 +++++++++ include/fdtdec.h | 13 +++++++++++++ include/i2c.h | 3 +++ lib/fdtdec.c | 33 +++++++++++++++++++++++++++++++++ 7 files changed, 128 insertions(+), 2 deletions(-)
Signature · 1 line
1.9.1
PATCH 1/4 dm: core: Add of_alias_get_highest_id()
The same functionality was added to Linux for i2c bus registration with this commit message:
"
of: base: add function to get highest id of an alias stem
I2C supports adding adapters using either a dynamic or fixed id. The latter is provided by aliases in the DT case. To prevent id collisions of those two types, install this function which gives us the highest fixed id, so we can then let the dynamically created ones come after this highest number.
"
Add it also to U-Boot for DM I2C support.
---
drivers/core/of_access.c | 18 ++++++++++++++++++ include/dm/of_access.h | 9 +++++++++ 2 files changed, 27 insertions(+)
drivers/core/of_access.c +18 -0
@@ -812,6 +812,24 @@ int of_alias_get_id(const struct device_node *np, const char *stem)return id; } +int of_alias_get_highest_id (const char *stem) +{ +struct alias_prop *app; +int id = -ENODEV ; + +mutex_lock (&of_mutex); +list_for_each_entry (app, &aliases_lookup, link) { +if (strcmp (app->stem, stem) !=0 ) +continue ; + +if (app->id > id) + id = app->id; + } +mutex_unlock (&of_mutex); + +return id; +} +struct device_node *of_get_stdout (void ) {return of_stdout;
include/dm/of_access.h +9 -0
@@ -425,6 +425,15 @@ int of_alias_scan(void);int of_alias_get_id (const struct device_node *np,const char *stem);/** +* of_alias_get_highest_id - Get highest alias id for the given stem +* @stem: Alias stem to be examined +* +* The function travels the lookup table to get the highest alias id for the +* given alias stem. It returns the alias id if found. +*/ +int of_alias_get_highest_id (const char *stem); + +/** * of_get_stdout() - Get node to use for stdout * * @return node referred to by stdout-path alias, or NULL if none
Signature · 1 line
1.9.1
PATCH 2/4 fdt: Introduce fdtdec_get_alias_highest_id()
In reply to Michal SimekFind out the highest alias ID used for certain subsystem. This call will be used for alocating IDs for i2c buses which are not described in DT.
---
include/fdtdec.h | 13 +++++++++++++ lib/fdtdec.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)
include/fdtdec.h +13 -0
@@ -626,6 +626,19 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp);/** +* Get the highest alias number for susbystem. +* +* It parses all aliases and find out highest recorded alias for subsystem. +* Aliases are of the form <base><num> where <num> is the sequence number. +* +* @param blob Device tree blob (if NULL, then error is returned) +* @param base Base name for alias susbystem (before the number) +* +* @return 0 highest alias ID, -1 if not found +*/ +int fdtdec_get_alias_highest_id (const void *blob,const char *base); + +/** * Get a property from the /chosen node * * @param blob Device tree blob (if NULL, then NULL is returned)
lib/fdtdec.c +33 -0
@@ -549,6 +549,39 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset,return -ENOENT ; } +int fdtdec_get_alias_highest_id (const void *blob,const char *base) +{ +int base_len =strlen (base); +int prop_offset; +int aliases; +int max =-1 ; + +debug ("Looking for highest alias id for '%s'\n" , base); + + aliases =fdt_path_offset (blob,"/aliases" ); +for (prop_offset =fdt_first_property_offset (blob, aliases); + prop_offset >0 ; + prop_offset =fdt_next_property_offset (blob, prop_offset)) { +const char *prop; +const char *name; +int len, val; + + prop =fdt_getprop_by_offset (blob, prop_offset, &name, &len); +debug (" - %s, %s\n" , name, prop); +if (*prop !='/' || prop[len -1 ] || +strncmp (name, base, base_len)) +continue ; + + val =trailing_strtol (name); +if (val > max) { +debug ("Found seq %d\n" , val); + max = val; + } + } + +return max; +} +const char *fdtdec_get_chosen_prop (const void *blob,const char *name) {int chosen_node;
Signature · 1 line
1.9.1
PATCH 3/4 i2c: dm: Record maximum id of devices before probing devices
In reply to Michal SimekThere is a need to find out the first free i2c ID which can be used for i2s buses (including i2c buses connected to i2c mux). Do it early in init and share this variable with other i2c classes for uniq bus identification.
---
drivers/i2c/i2c-uclass.c | 19 +++++++++++++++++++ include/i2c.h | 3 +++ 2 files changed, 22 insertions(+)
drivers/i2c/i2c-uclass.c +19 -0
@@ -23,6 +23,8 @@ enum { PIN_COUNT, }; +int i2c_highest_id =-1 ; +/* Useful debugging function */ void i2c_dump_msgs (struct i2c_msg *msg,int nmsgs) {
@@ -619,10 +621,27 @@ static int i2c_child_post_bind(struct udevice *dev)#endif } +int i2c_uclass_init (struct uclass *class) +{ +#ifdef CONFIG_OF_LIVE +int ret; + + ret =of_alias_get_highest_id ("i2c" ); +if (ret >=0 ) + i2c_highest_id = ret; +#else + i2c_highest_id =fdtdec_get_alias_highest_id (gd->fdt_blob,"i2c" ); +#endif +debug ("%s: i2c highest_id %d\n" , __func__, i2c_highest_id); + +return 0 ; +} +UCLASS_DRIVER (i2c) = { .id =UCLASS_I2C , .name ="i2c" , .flags =DM_UC_FLAG_SEQ_ALIAS , + .init = i2c_uclass_init, #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) .post_bind = dm_scan_fdt_dev, #endif
include/i2c.h +3 -0
@@ -16,6 +16,9 @@#ifndef _I2C_H_#define _I2C_H_ +/* Stores maximum highest i2c alias number */ +extern int i2c_highest_id; +/* * For now there are essentially two parts to this file - driver model * here at the top, and the older code below (with CONFIG_SYS_I2C being
Signature · 1 line
1.9.1
PATCH 4/4 i2c: mux: Add support for not listed sub-buses
In reply to Michal SimekBefore this patch is applied all i2c sub-buses are using number -1 and they can't be addresses(switch to). If all busses are listed in DT alias they will get proper numbers and U-Boot can work with them. In Linux buses which are not listed in DT alias get uniq number which starts from the first highest free ID.
This is the behavior on ZynqMP zcu100-revA before this patch is applied.
Bus 0: i2c at ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus 1: i2c at ff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 5
Bus -1: i2c at 6
Bus -1: i2c at 7
When the patch is applied also i2c-mux busses are listed properly.
ZynqMP> i2c bus
Bus 0: i2c at ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 1: i2c at ff030000 (active 1)
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0 (active 5)
54: generic_54, offset len 1, flags 0
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7
---
zcu102-revA
Before this patch applied for !DM case with static description ZynqMP> i2c bus
Bus 0: zynq_0
Bus 1: zynq_0->PCA9544A at 0x75:0
Bus 2: zynq_0->PCA9544A at 0x75:1
Bus 3: zynq_0->PCA9544A at 0x75:2
Bus 4: zynq_1
Bus 5: zynq_1->PCA9548 at 0x74:0
Bus 6: zynq_1->PCA9548 at 0x74:1
Bus 7: zynq_1->PCA9548 at 0x74:2
Bus 8: zynq_1->PCA9548 at 0x74:3
Bus 9: zynq_1->PCA9548 at 0x74:4
Bus 10: zynq_1->PCA9548 at 0x75:0
Bus 11: zynq_1->PCA9548 at 0x75:1
Bus 12: zynq_1->PCA9548 at 0x75:2
Bus 13: zynq_1->PCA9548 at 0x75:3
Bus 14: zynq_1->PCA9548 at 0x75:4
Bus 15: zynq_1->PCA9548 at 0x75:5
Bus 16: zynq_1->PCA9548 at 0x75:6
Bus 17: zynq_1->PCA9548 at 0x75:7
When Patch is applied with OF_LIVE - of_alias_get_highest_id() is used ZynqMP> i2c bus
Bus 0: i2c at ff020000
75: i2c-mux at 75, offset len 1, flags 0
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 1: i2c at ff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7
For !OF_LIVE - hardcoded number is used
ZynqMP> i2c bus
Bus 0: i2c at ff020000
75: i2c-mux at 75, offset len 1, flags 0
Bus 21: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 22: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 23: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 1: i2c at ff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 24: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 25: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 26: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 27: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 28: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 29: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 30: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 31: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 32: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 33: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 34: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 35: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 36: i2c at ff030000->i2c-mux at 75->i2c at 7
--- drivers/i2c/muxes/i2c-mux-uclass.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)
drivers/i2c/muxes/i2c-mux-uclass.c +33 -2
@@ -9,6 +9,7 @@#include <errno.h> #include <i2c.h> #include <dm/lists.h> +#include <dm/of_access.h> #include <dm/root.h> /**
@@ -59,13 +60,42 @@ static int i2c_mux_post_bind(struct udevice *mux)dev_for_each_subnode (node, mux) {struct udevice *dev;const char *name; +const char *arrow ="->" ; +char *full_name; +int parent_name_len, arrow_len, mux_name_len, name_len; name =ofnode_get_name (node); - ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , name, - node, &dev); + +/* Calculate lenghts of strings */ + parent_name_len =strlen (mux->parent->name); + arrow_len =strlen (arrow); + mux_name_len =strlen (mux->name); + name_len =strlen (name); + + full_name =calloc (1 , parent_name_len + arrow_len + + mux_name_len + arrow_len + name_len +1 ); +if (!full_name) +return -ENOMEM ; + +/* Compose bus name */ +strcat (full_name, mux->parent->name); +strcat (full_name, arrow); +strcat (full_name, mux->name); +strcat (full_name, arrow); +strcat (full_name, name); + + ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , + full_name, node, &dev);debug (" - bind ret=%d, %s\n" , ret, dev ? dev->name :NULL );if (ret)return ret; + +/* If dt alias is not found start to allocate new IDs */ +if (dev->req_seq ==-1 ) + dev->req_seq = ++i2c_highest_id; + +debug ("%s: MUX bus %d: %s\n" , __func__, dev->req_seq, + full_name); }return 0 ;
@@ -192,6 +222,7 @@ U_BOOT_DRIVER(i2c_mux_bus) = {UCLASS_DRIVER (i2c_mux) = { .id =UCLASS_I2C_MUX , + .flags =DM_UC_FLAG_SEQ_ALIAS , .name ="i2c_mux" , .post_bind = i2c_mux_post_bind, .post_probe = i2c_mux_post_probe,
Signature · 1 line
1.9.1
cover Align U-Boot I2C DM bus ID handling with Linux
In reply to Michal SimekQuoted 38 lines · Michal Simek
U-Boot with
I2C_DMenabled is not capable to list i2c busses connected to i2c mux. For getting this work there is a need to find out highest alias ID and use this uniq number for new buses connected to I2C mux. This series is making this happen.There is only one missing piece which is that also i2c controllers which are not listed in DT are not using this feature.
For getting this work it would be necessary to setupdev->req_seqinpre_bindfunction.int
i2c_pre_bind(struct udevice *dev){ if (dev->req_seq == -1) { dev->req_seq = ++i2c_highest_id; } return 0; }It can be done also in
post_bindbut it looks quite weird that controller has highest ID then i2c-mux sub-buses connected to it. For example:
ZynqMP> i2c bus
Bus 3: i2c atff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 0: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 1: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 17: i2c atff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 4: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 3
...
Quoted 2 lines
That's why I think it would be better to introduce
pre_bindhooks and call it indevice_bind_common()before binding childs.
I have retested again and this is working properly.
This is the patch.
drivers/i2c/i2c-uclass.c +17 -3
@@ -637,14 +637,28 @@ int i2c_uclass_init(struct uclass *class)return 0 ; } +static int i2c_post_bind (struct udevice *dev) +{ +int ret =0 ; + +debug ("%s %d\n" , __func__, dev->req_seq); + +if (dev->req_seq ==-1 ) + dev->req_seq = ++i2c_highest_id; + +#if CONFIG_IS_ENABLED (OF_CONTROL ) && !CONFIG_IS_ENABLED (OF_PLATDATA ) + ret =dm_scan_fdt_dev (dev); +#endif + +return ret; +} +UCLASS_DRIVER (i2c) = { .id =UCLASS_I2C , .name ="i2c" , .flags =DM_UC_FLAG_SEQ_ALIAS , .init = i2c_uclass_init, -#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) - .post_bind = dm_scan_fdt_dev, -#endif + .post_bind = i2c_post_bind, .post_probe = i2c_post_probe, .per_device_auto_alloc_size =sizeof (struct dm_i2c_bus ), .per_child_platdata_auto_alloc_size =sizeof (struct dm_i2c_chip ),
And this is the output
ZynqMP> i2c bus
Bus 0: i2c at ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 1: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 4: i2c at ff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7
Without this fix i2c controllers have only -1 because they are not listed in DT.
I will send this as a patch when this is all reviewed.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190118/e0fdccdf/attachment.sig>
PATCH 4/4 i2c: mux: Add support for not listed sub-buses
In reply to Michal SimekHi Heiko,
Quoted 197 lines · Michal Simek
Before this patch is applied all i2c sub-buses are using number -1 and they can't be addresses(switch to). If all busses are listed in DT alias they will get proper numbers and U-Boot can work with them. In Linux buses which are not listed in DT alias get uniq number which starts from the first highest free ID.
This is the behavior on ZynqMP zcu100-revA before this patch is applied.
Bus 0: i2c at
ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus 1: i2c atff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 5
Bus -1: i2c at 6
Bus -1: i2c at 7When the patch is applied also i2c-mux busses are listed properly.
ZynqMP> i2c bus
Bus 0: i2c atff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 1: i2c atff030000(active 1)
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0 (active 5)
54:generic_54, offset len 1, flags 0
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7Signed-off-by Michal Simek <[email protected]>---
zcu102-revA
Before this patch applied for !DM case with static description ZynqMP> i2c bus
Bus 0:zynq_0
Bus 1:zynq_0->PCA9544Aat 0x75:0
Bus 2:zynq_0->PCA9544Aat 0x75:1
Bus 3:zynq_0->PCA9544Aat 0x75:2
Bus 4:zynq_1
Bus 5:zynq_1->PCA9548at 0x74:0
Bus 6:zynq_1->PCA9548at 0x74:1
Bus 7:zynq_1->PCA9548at 0x74:2
Bus 8:zynq_1->PCA9548at 0x74:3
Bus 9:zynq_1->PCA9548at 0x74:4
Bus 10:zynq_1->PCA9548at 0x75:0
Bus 11:zynq_1->PCA9548at 0x75:1
Bus 12:zynq_1->PCA9548at 0x75:2
Bus 13:zynq_1->PCA9548at 0x75:3
Bus 14:zynq_1->PCA9548at 0x75:4
Bus 15:zynq_1->PCA9548at 0x75:5
Bus 16:zynq_1->PCA9548at 0x75:6
Bus 17:zynq_1->PCA9548at 0x75:7When Patch is applied with
OF_LIVE-of_alias_get_highest_id()is used ZynqMP> i2c bus
Bus 0: i2c atff020000
75: i2c-mux at 75, offset len 1, flags 0
Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 1: i2c atff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7For !OF_LIVE - hardcoded number is used
ZynqMP> i2c bus
Bus 0: i2c atff020000
75: i2c-mux at 75, offset len 1, flags 0
Bus 21: i2c at ff020000->i2c-mux at 75->i2c at 0
Bus 22: i2c at ff020000->i2c-mux at 75->i2c at 1
Bus 23: i2c at ff020000->i2c-mux at 75->i2c at 2
Bus 1: i2c atff030000
74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 24: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 25: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 26: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 27: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 28: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 29: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 30: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 31: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 32: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 33: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 34: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 35: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 36: i2c at ff030000->i2c-mux at 75->i2c at 7--- drivers/i2c/muxes/i2c-mux-uclass.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)drivers/i2c/muxes/i2c-mux-uclass.c +32
-2@@ -9,6 +9,7 @@#include <errno.h> #include <i2c.h> #include <dm/lists.h> +#include <dm/of_access.h> #include <dm/root.h> /** @@ -59,13 +60,42 @@ static int i2c_mux_post_bind(struct udevice *mux)dev_for_each_subnode (node, mux) {struct udevice *dev;const char *name; +const char *arrow ="->" ; +char *full_name; +int parent_name_len, arrow_len, mux_name_len, name_len; name =ofnode_get_name (node); - ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , name, - node, &dev); + +/* Calculate lenghts of strings */ + parent_name_len =strlen (mux->parent->name); + arrow_len =strlen (arrow); + mux_name_len =strlen (mux->name); + name_len =strlen (name); + + full_name =calloc (1 , parent_name_len + arrow_len + + mux_name_len + arrow_len + name_len +1 ); +if (!full_name) +return -ENOMEM ; + +/* Compose bus name */ +strcat (full_name, mux->parent->name); +strcat (full_name, arrow); +strcat (full_name, mux->name); +strcat (full_name, arrow); +strcat (full_name, name); + + ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , + full_name, node, &dev);debug (" - bind ret=%d, %s\n" , ret, dev ? dev->name :NULL );if (ret)return ret; + +/* If dt alias is not found start to allocate new IDs */ +if (dev->req_seq ==-1 ) + dev->req_seq = ++i2c_highest_id; + +debug ("%s: MUX bus %d: %s\n" , __func__, dev->req_seq, + full_name); }return 0 ;
drivers/i2c/muxes/i2c-mux-uclass.c U_BOOT_DRIVER(i2c_mux_bus) = { · line 228
Quoted 7 lines
drivers/i2c/muxes/i2c-mux-uclass.c +1
-0@@ -192,6 +222,7 @@ U_BOOT_DRIVER(i2c_mux_bus) = {UCLASS_DRIVER (i2c_mux) = { .id =UCLASS_I2C_MUX , + .flags =DM_UC_FLAG_SEQ_ALIAS , .name ="i2c_mux" , .post_bind = i2c_mux_post_bind, .post_probe = i2c_mux_post_probe,
Can you please take a look at this series?
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190124/0260e2a4/attachment.sig>
PATCH 1/4 dm: core: Add of_alias_get_highest_id()
In reply to Michal SimekHi Simon,
Quoted 66 lines · Michal Simek
The same functionality was added to Linux for i2c bus registration with this commit message:
"
of: base: add function to get highest id of an alias stemI2C supports adding adapters using either a dynamic or fixed id. The latter is provided by aliases in the DT case. To prevent id collisions of those two types, install this function which gives us the highest fixed id, so we can then let the dynamically created ones come after this highest number.
Signed-off-by Wolfram Sang <[email protected]>Acked-by Rob Herring <[email protected]>Signed-off-by Wolfram Sang <[email protected]>"
Add it also to U-Boot for DM I2C support.
Signed-off-by Michal Simek <[email protected]>---
drivers/core/of_access.c | 18 ++++++++++++++++++ include/dm/of_access.h | 9 +++++++++ 2 files changed, 27 insertions(+)drivers/core/of_access.c +18
-0@@ -812,6 +812,24 @@ int of_alias_get_id(const struct device_node *np, const char *stem)return id; } +int of_alias_get_highest_id (const char *stem) +{ +struct alias_prop *app; +int id = -ENODEV ; + +mutex_lock (&of_mutex); +list_for_each_entry (app, &aliases_lookup, link) { +if (strcmp (app->stem, stem) !=0 ) +continue ; + +if (app->id > id) + id = app->id; + } +mutex_unlock (&of_mutex); + +return id; +} +struct device_node *of_get_stdout (void ) {return of_stdout;include/dm/of_access.h +2
-0@@ -425,6 +425,15 @@ int of_alias_scan(void);int of_alias_get_id (const struct device_node *np,const char *stem);/** +* of_alias_get_highest_id - Get highest alias id for the given stem +* @stem: Alias stem to be examined
include/dm/of_access.h int of_alias_scan(void); · line 439
Quoted 10 lines
include/dm/of_access.h +7
-0+* +* The function travels the lookup table to get the highest alias id for the +* given alias stem. It returns the alias id if found. +*/ +int of_alias_get_highest_id (const char *stem); + +/** * of_get_stdout() - Get node to use for stdout * * @return node referred to by stdout-path alias, or NULL if none
Can you please review 1/4 and 2/4 patches?
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190128/b9f01382/attachment.sig>
PATCH 1/4 dm: core: Add of_alias_get_highest_id()
In reply to Michal SimekHi Michal,
Quoted 61 lines · Michal Simek
The same functionality was added to Linux for i2c bus registration with this commit message:
"
of: base: add function to get highest id of an alias stemI2C supports adding adapters using either a dynamic or fixed id. The latter is provided by aliases in the DT case. To prevent id collisions of those two types, install this function which gives us the highest fixed id, so we can then let the dynamically created ones come after this highest number.
Signed-off-by Wolfram Sang <[email protected]>Acked-by Rob Herring <[email protected]>Signed-off-by Wolfram Sang <[email protected]>"
Add it also to U-Boot for DM I2C support.
Signed-off-by Michal Simek <[email protected]>---
drivers/core/of_access.c | 18 ++++++++++++++++++ include/dm/of_access.h | 9 +++++++++ 2 files changed, 27 insertions(+)drivers/core/of_access.c +18
-0@@ -812,6 +812,24 @@ int of_alias_get_id(const struct device_node *np, const char *stem)return id; } +int of_alias_get_highest_id (const char *stem) +{ +struct alias_prop *app; +int id = -ENODEV ; + +mutex_lock (&of_mutex); +list_for_each_entry (app, &aliases_lookup, link) { +if (strcmp (app->stem, stem) !=0 ) +continue ; + +if (app->id > id) + id = app->id; + } +mutex_unlock (&of_mutex); + +return id; +} +struct device_node *of_get_stdout (void ) {return of_stdout;include/dm/of_access.h +0
-0
include/dm/of_access.h int of_alias_scan(void); · line 432
Quoted 8 lines
include/dm/of_access.h +5
-0@@ -425,6 +425,15 @@ int of_alias_scan(void);int of_alias_get_id (const struct device_node *np,const char *stem);/** +* of_alias_get_highest_id - Get highest alias id for the given stem +* @stem: Alias stem to be examined +* +* The function travels the lookup table to get the highest alias id for the +* given alias stem. It returns the alias id if found.
@return
Quoted 10 lines
include/dm/of_access.h +4
-1+*/ +int of_alias_get_highest_id (const char *stem); + +/** * of_get_stdout() - Get node to use for stdout * * @return node referred to by stdout-path alias, or NULL if none -- 1.9.1
Can we place have a test that calls this for a few values?
Also see uclass_find_next_free_req_seq() and uclass_resolve_seq() which is what U-Boot does today. It is first in, first served. This is supposed to mean that devices without an alias don't get a req_seq value, meaning that the seq value is set to the next available value.
I suspect it is OK to change the behaviour though. It might affect some boards which rely on not having aliases but still getting bus numbers.
Regards,
Simon
PATCH 2/4 fdt: Introduce fdtdec_get_alias_highest_id()
In reply to Michal SimekHi Michal,
Quoted 65 lines · Michal Simek
Find out the highest alias ID used for certain subsystem. This call will be used for alocating IDs for i2c buses which are not described in DT.
Signed-off-by Michal Simek <[email protected]>---
include/fdtdec.h | 13 +++++++++++++ lib/fdtdec.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)include/fdtdec.h +13
-0@@ -626,6 +626,19 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp);/** +* Get the highest alias number for susbystem. +* +* It parses all aliases and find out highest recorded alias for subsystem. +* Aliases are of the form <base><num> where <num> is the sequence number. +* +* @param blob Device tree blob (if NULL, then error is returned) +* @param base Base name for alias susbystem (before the number) +* +* @return 0 highest alias ID, -1 if not found +*/ +int fdtdec_get_alias_highest_id (const void *blob,const char *base); + +/** * Get a property from the /chosen node * * @param blob Device tree blob (if NULL, then NULL is returned) lib/fdtdec.c +21
-0@@ -549,6 +549,39 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset,return -ENOENT ; } +int fdtdec_get_alias_highest_id (const void *blob,const char *base) +{ +int base_len =strlen (base); +int prop_offset; +int aliases; +int max =-1 ; + +debug ("Looking for highest alias id for '%s'\n" , base); + + aliases =fdt_path_offset (blob,"/aliases" ); +for (prop_offset =fdt_first_property_offset (blob, aliases); + prop_offset >0 ; + prop_offset =fdt_next_property_offset (blob, prop_offset)) { +const char *prop; +const char *name; +int len, val; + + prop =fdt_getprop_by_offset (blob, prop_offset, &name, &len); +debug (" - %s, %s\n" , name, prop); +if (*prop !='/' || prop[len -1 ] || +strncmp (name, base, base_len))
lib/fdtdec.c int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, · line 582
Quoted 10 lines
lib/fdtdec.c +10
-0+continue ; + + val =trailing_strtol (name); +if (val > max) { +debug ("Found seq %d\n" , val); + max = val; + } + } + +return max;
This looks right to me. Can you please add a test that calls this for a few sandbox aliases?
Quoted 8 lines
lib/fdtdec.c +2
-1+} +const char *fdtdec_get_chosen_prop (const void *blob,const char *name) {int chosen_node; --1.9.1
Regards,
Simon
Quoted 83 lines · Michal Simek
Find out the highest alias ID used for certain subsystem. This call will be used for alocating IDs for i2c buses which are not described in DT.
Signed-off-by Michal Simek <[email protected]>---
include/fdtdec.h | 13 +++++++++++++ lib/fdtdec.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)include/fdtdec.h +13
-0@@ -626,6 +626,19 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp);/** +* Get the highest alias number for susbystem. +* +* It parses all aliases and find out highest recorded alias for subsystem. +* Aliases are of the form <base><num> where <num> is the sequence number. +* +* @param blob Device tree blob (if NULL, then error is returned) +* @param base Base name for alias susbystem (before the number) +* +* @return 0 highest alias ID, -1 if not found +*/ +int fdtdec_get_alias_highest_id (const void *blob,const char *base); + +/** * Get a property from the /chosen node * * @param blob Device tree blob (if NULL, then NULL is returned) lib/fdtdec.c +33
-1@@ -549,6 +549,39 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset,return -ENOENT ; } +int fdtdec_get_alias_highest_id (const void *blob,const char *base) +{ +int base_len =strlen (base); +int prop_offset; +int aliases; +int max =-1 ; + +debug ("Looking for highest alias id for '%s'\n" , base); + + aliases =fdt_path_offset (blob,"/aliases" ); +for (prop_offset =fdt_first_property_offset (blob, aliases); + prop_offset >0 ; + prop_offset =fdt_next_property_offset (blob, prop_offset)) { +const char *prop; +const char *name; +int len, val; + + prop =fdt_getprop_by_offset (blob, prop_offset, &name, &len); +debug (" - %s, %s\n" , name, prop); +if (*prop !='/' || prop[len -1 ] || +strncmp (name, base, base_len)) +continue ; + + val =trailing_strtol (name); +if (val > max) { +debug ("Found seq %d\n" , val); + max = val; + } + } + +return max; +} +const char *fdtdec_get_chosen_prop (const void *blob,const char *name) {int chosen_node; --1.9.1
PATCH 3/4 i2c: dm: Record maximum id of devices before probing devices
In reply to Michal SimekHi Michal,
Quoted 31 lines · Michal Simek
There is a need to find out the first free i2c ID which can be used for i2s buses (including i2c buses connected to i2c mux). Do it early in init and share this variable with other i2c classes for uniq bus identification.
Signed-off-by Michal Simek <[email protected]>---
drivers/i2c/i2c-uclass.c | 19 +++++++++++++++++++ include/i2c.h | 3 +++ 2 files changed, 22 insertions(+)drivers/i2c/i2c-uclass.c +3
-0@@ -23,6 +23,8 @@ enum { PIN_COUNT, }; +int i2c_highest_id =-1 ; +/* Useful debugging function */ void i2c_dump_msgs (struct i2c_msg *msg,int nmsgs) {@@ -619,10 +621,27 @@ static int i2c_child_post_bind(struct udevice *dev)#endif } +int i2c_uclass_init (struct uclass *class)
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice *dev) · line 634
Quoted 10 lines
drivers/i2c/i2c-uclass.c +10
-0+{ +#ifdef CONFIG_OF_LIVE +int ret; + + ret =of_alias_get_highest_id ("i2c" ); +if (ret >=0 ) + i2c_highest_id = ret; +#else + i2c_highest_id =fdtdec_get_alias_highest_id (gd->fdt_blob,"i2c" ); +#endif
This should call dev_read_alias_highest_id() or similar, which does the logic you have here.
Quoted 18 lines
drivers/i2c/i2c-uclass.c +6
-0+debug ("%s: i2c highest_id %d\n" , __func__, i2c_highest_id); + +return 0 ; +} +UCLASS_DRIVER (i2c) = { .id =UCLASS_I2C , .name ="i2c" , .flags =DM_UC_FLAG_SEQ_ALIAS , + .init = i2c_uclass_init, #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) .post_bind = dm_scan_fdt_dev, #endifinclude/i2c.h +0
-0
include/i2c.h line 20
Quoted 5 lines
include/i2c.h +2
-0@@ -16,6 +16,9 @@#ifndef _I2C_H_#define _I2C_H_ +/* Stores maximum highest i2c alias number */ +extern int i2c_highest_id;
This should be in uclass-private data, not a global.
But also I feel that the behaviour needs to be consistent for all U-Boot buses, not just I2C. So can we modify the existing core DM code instead? I think a change to uclass_resolve_seq() might be enough.
Quoted 7 lines
include/i2c.h +1
-1+/* * For now there are essentially two parts to this file - driver model * here at the top, and the older code below (with CONFIG_SYS_I2C being -- 1.9.1
Regards,
Simon
PATCH 4/4 i2c: mux: Add support for not listed sub-buses
In reply to Michal SimekHi Michal,
Quoted 135 lines · Michal Simek
Before this patch is applied all i2c sub-buses are using number -1 and they can't be addresses(switch to). If all busses are listed in DT alias they will get proper numbers and U-Boot can work with them. In Linux buses which are not listed in DT alias get uniq number which starts from the first highest free ID.
This is the behavior on ZynqMP zcu100-revA before this patch is applied.
Bus 0: i2c at
ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0Bus -1: i2c at 0 Bus -1: i2c at 1 Bus -1: i2c at 2 Bus 1: i2c at ff03000074: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 5
Bus -1: i2c at 6
Bus -1: i2c at 7When the patch is applied also i2c-mux busses are listed properly.
ZynqMP> i2c bus
Bus 0: i2c atff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0 Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1 Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2 Bus 1: i2c at ff030000 (active 1)74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0 (active 5)
54:generic_54, offset len 1, flags 0Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1 Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2 Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3 Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4 Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0 Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1 Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2 Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3 Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4 Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5 Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6 Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7Signed-off-by Michal Simek <[email protected]>---
zcu102-revA
Before this patch applied for !DM case with static description ZynqMP> i2c bus
Bus 0: zynq_0 Bus 1: zynq_0->PCA9544A at 0x75:0 Bus 2: zynq_0->PCA9544A at 0x75:1 Bus 3: zynq_0->PCA9544A at 0x75:2 Bus 4: zynq_1 Bus 5: zynq_1->PCA9548 at 0x74:0 Bus 6: zynq_1->PCA9548 at 0x74:1 Bus 7: zynq_1->PCA9548 at 0x74:2 Bus 8: zynq_1->PCA9548 at 0x74:3 Bus 9: zynq_1->PCA9548 at 0x74:4 Bus 10: zynq_1->PCA9548 at 0x75:0 Bus 11: zynq_1->PCA9548 at 0x75:1 Bus 12: zynq_1->PCA9548 at 0x75:2 Bus 13: zynq_1->PCA9548 at 0x75:3 Bus 14: zynq_1->PCA9548 at 0x75:4 Bus 15: zynq_1->PCA9548 at 0x75:5 Bus 16: zynq_1->PCA9548 at 0x75:6 Bus 17: zynq_1->PCA9548 at 0x75:7When Patch is applied with
OF_LIVE-of_alias_get_highest_id()is used ZynqMP> i2c bus
Bus 0: i2c atff020000
75: i2c-mux at 75, offset len 1, flags 0Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0 Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1 Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2 Bus 1: i2c at ff030000 74: i2c-mux at 74, offset len 1, flags 0 75: i2c-mux at 75, offset len 1, flags 0 Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0 Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1 Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2 Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3 Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4 Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0 Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1 Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2 Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3 Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4 Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5 Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6 Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7For !OF_LIVE - hardcoded number is used
ZynqMP> i2c bus
Bus 0: i2c atff020000
75: i2c-mux at 75, offset len 1, flags 0Bus 21: i2c at ff020000->i2c-mux at 75->i2c at 0 Bus 22: i2c at ff020000->i2c-mux at 75->i2c at 1 Bus 23: i2c at ff020000->i2c-mux at 75->i2c at 2 Bus 1: i2c at ff03000074: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 24: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 25: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 26: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 27: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 28: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 29: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 30: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 31: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 32: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 33: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 34: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 35: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 36: i2c at ff030000->i2c-mux at 75->i2c at 7
Quoted 3 lines
--- drivers/i2c/muxes/i2c-mux-uclass.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)
This is quite a complicated issue...
Quoted 35 lines
drivers/i2c/muxes/i2c-mux-uclass.c +15
-2@@ -9,6 +9,7 @@#include <errno.h> #include <i2c.h> #include <dm/lists.h> +#include <dm/of_access.h> #include <dm/root.h> /** @@ -59,13 +60,42 @@ static int i2c_mux_post_bind(struct udevice *mux)dev_for_each_subnode (node, mux) {struct udevice *dev;const char *name; +const char *arrow ="->" ; +char *full_name; +int parent_name_len, arrow_len, mux_name_len, name_len; name =ofnode_get_name (node); - ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , name, - node, &dev); + +/* Calculate lenghts of strings */ + parent_name_len =strlen (mux->parent->name); + arrow_len =strlen (arrow); + mux_name_len =strlen (mux->name); + name_len =strlen (name); + + full_name =calloc (1 , parent_name_len + arrow_len + + mux_name_len + arrow_len + name_len +1 ); +if (!full_name) +return -ENOMEM ;
drivers/i2c/muxes/i2c-mux-uclass.c static int i2c_mux_post_bind(struct udevice *mux) · line 88
Quoted 10 lines
drivers/i2c/muxes/i2c-mux-uclass.c +10
-0+ +/* Compose bus name */ +strcat (full_name, mux->parent->name); +strcat (full_name, arrow); +strcat (full_name, mux->name); +strcat (full_name, arrow); +strcat (full_name, name); + + ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , + full_name, node, &dev);
Why do we use the full name here? We can create this by looking at the parents if needed.
drivers/i2c/muxes/i2c-mux-uclass.c static int i2c_mux_post_bind(struct udevice *mux) · line 95
Quoted 7 lines
drivers/i2c/muxes/i2c-mux-uclass.c +4
-0debug (" - bind ret=%d, %s\n" , ret, dev ? dev->name :NULL );if (ret)return ret; + +/* If dt alias is not found start to allocate new IDs */ +if (dev->req_seq ==-1 ) + dev->req_seq = ++i2c_highest_id;
As in the other patch, if we change this, I think we should do it in DM core, by adjusting uclass_resolve_seq(). Would that work?
Quoted 15 lines
drivers/i2c/muxes/i2c-mux-uclass.c +4
-1+ +debug ("%s: MUX bus %d: %s\n" , __func__, dev->req_seq, + full_name); }return 0 ;@@ -192,6 +222,7 @@ U_BOOT_DRIVER(i2c_mux_bus) = {UCLASS_DRIVER (i2c_mux) = { .id =UCLASS_I2C_MUX , + .flags =DM_UC_FLAG_SEQ_ALIAS , .name ="i2c_mux" , .post_bind = i2c_mux_post_bind, .post_probe = i2c_mux_post_probe, --
Quoted 2 lines
1.9.1
Also we have no i2c mux tests by the look of it, and should add a test to make sure this works on sandbox.
Regards,
Simon
PATCH 2/4 fdt: Introduce fdtdec_get_alias_highest_id()
In reply to Simon GlassQuoted 73 lines · Simon Glass
Hi Michal,
Quoted 70 lines · Michal Simek
Find out the highest alias ID used for certain subsystem. This call will be used for alocating IDs for i2c buses which are not described in DT.
Signed-off-by Michal Simek <[email protected]>---
include/fdtdec.h | 13 +++++++++++++ lib/fdtdec.c | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+)include/fdtdec.h +13
-0@@ -626,6 +626,19 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int node, int *seqp);/** +* Get the highest alias number for susbystem. +* +* It parses all aliases and find out highest recorded alias for subsystem. +* Aliases are of the form <base><num> where <num> is the sequence number. +* +* @param blob Device tree blob (if NULL, then error is returned) +* @param base Base name for alias susbystem (before the number) +* +* @return 0 highest alias ID, -1 if not found +*/ +int fdtdec_get_alias_highest_id (const void *blob,const char *base); + +/** * Get a property from the /chosen node * * @param blob Device tree blob (if NULL, then NULL is returned) lib/fdtdec.c +26
-0@@ -549,6 +549,39 @@ int fdtdec_get_alias_seq(const void *blob, const char *base, int offset,return -ENOENT ; } +int fdtdec_get_alias_highest_id (const void *blob,const char *base) +{ +int base_len =strlen (base); +int prop_offset; +int aliases; +int max =-1 ; + +debug ("Looking for highest alias id for '%s'\n" , base); + + aliases =fdt_path_offset (blob,"/aliases" ); +for (prop_offset =fdt_first_property_offset (blob, aliases); + prop_offset >0 ; + prop_offset =fdt_next_property_offset (blob, prop_offset)) { +const char *prop; +const char *name; +int len, val; + + prop =fdt_getprop_by_offset (blob, prop_offset, &name, &len); +debug (" - %s, %s\n" , name, prop); +if (*prop !='/' || prop[len -1 ] || +strncmp (name, base, base_len)) +continue ; + + val =trailing_strtol (name); +if (val > max) { +debug ("Found seq %d\n" , val);
Quoted 8 lines
lib/fdtdec.c int fdtdec_get_alias_seq(const void *blob, const char *base, int offset, · line 582
Quoted 5 lines
lib/fdtdec.c +5
-0+ max = val; + } + } + +return max;This looks right to me. Can you please add a test that calls this for a few sandbox aliases?
let's see how this can be done.
M
PATCH 1/4 dm: core: Add of_alias_get_highest_id()
In reply to Simon GlassQuoted 88 lines · Simon Glass
Hi Michal,
Quoted 61 lines · Michal Simek
The same functionality was added to Linux for i2c bus registration with this commit message:
"
of: base: add function to get highest id of an alias stemI2C supports adding adapters using either a dynamic or fixed id. The latter is provided by aliases in the DT case. To prevent id collisions of those two types, install this function which gives us the highest fixed id, so we can then let the dynamically created ones come after this highest number.
Signed-off-by Wolfram Sang <[email protected]>Acked-by Rob Herring <[email protected]>Signed-off-by Wolfram Sang <[email protected]>"
Add it also to U-Boot for DM I2C support.
Signed-off-by Michal Simek <[email protected]>---
drivers/core/of_access.c | 18 ++++++++++++++++++ include/dm/of_access.h | 9 +++++++++ 2 files changed, 27 insertions(+)drivers/core/of_access.c +18
-0@@ -812,6 +812,24 @@ int of_alias_get_id(const struct device_node *np, const char *stem)return id; } +int of_alias_get_highest_id (const char *stem) +{ +struct alias_prop *app; +int id = -ENODEV ; + +mutex_lock (&of_mutex); +list_for_each_entry (app, &aliases_lookup, link) { +if (strcmp (app->stem, stem) !=0 ) +continue ; + +if (app->id > id) + id = app->id; + } +mutex_unlock (&of_mutex); + +return id; +} +struct device_node *of_get_stdout (void ) {return of_stdout;include/dm/of_access.h +0
-0include/dm/of_access.h int of_alias_scan(void); · line 432
Quoted 8 lines
include/dm/of_access.h +5
-0@@ -425,6 +425,15 @@ int of_alias_scan(void);int of_alias_get_id (const struct device_node *np,const char *stem);/** +* of_alias_get_highest_id - Get highest alias id for the given stem +* @stem: Alias stem to be examined +* +* The function travels the lookup table to get the highest alias id for the +* given alias stem. It returns the alias id if found. @return
Quoted 10 lines
include/dm/of_access.h +4
-1+*/ +int of_alias_get_highest_id (const char *stem); + +/** * of_get_stdout() - Get node to use for stdout * * @return node referred to by stdout-path alias, or NULL if none -- 1.9.1
Can we place have a test that calls this for a few values?
Quoted 5 lines
Also see
uclass_find_next_free_req_seq()anduclass_resolve_seq()which is what U-Boot does today. It is first in, first served. This is supposed to mean that devices without an alias don't get areq_seqvalue, meaning that the seq value is set to the next available value.
Let me play with it and see that calling sequence.
Quoted 3 lines
I suspect it is OK to change the behaviour though. It might affect some boards which rely on not having aliases but still getting bus numbers.
Do you mean with I2C? Or different buses?
I don't think there is any affected board with DM_I2C and OF_CONTROL because unlisted aliases are using req_seq -1 now.
Thanks,
Michal
PATCH 3/4 i2c: dm: Record maximum id of devices before probing devices
In reply to Simon GlassQuoted 33 lines · Simon Glass
Hi Michal,
Quoted 30 lines · Michal Simek
There is a need to find out the first free i2c ID which can be used for i2s buses (including i2c buses connected to i2c mux). Do it early in init and share this variable with other i2c classes for uniq bus identification.
Signed-off-by Michal Simek <[email protected]>---
drivers/i2c/i2c-uclass.c | 19 +++++++++++++++++++ include/i2c.h | 3 +++ 2 files changed, 22 insertions(+)drivers/i2c/i2c-uclass.c +2
-0@@ -23,6 +23,8 @@ enum { PIN_COUNT, }; +int i2c_highest_id =-1 ; +/* Useful debugging function */ void i2c_dump_msgs (struct i2c_msg *msg,int nmsgs) {@@ -619,10 +621,27 @@ static int i2c_child_post_bind(struct udevice *dev)#endif }
Quoted 14 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice *dev) · line 634
Quoted 11 lines
drivers/i2c/i2c-uclass.c +11
-0+int i2c_uclass_init (struct uclass *class) +{ +#ifdef CONFIG_OF_LIVE +int ret; + + ret =of_alias_get_highest_id ("i2c" ); +if (ret >=0 ) + i2c_highest_id = ret; +#else + i2c_highest_id =fdtdec_get_alias_highest_id (gd->fdt_blob,"i2c" ); +#endif This should call
dev_read_alias_highest_id()or similar, which does the logic you have here.
not a problem with this.
Quoted 22 lines
Quoted 22 lines
drivers/i2c/i2c-uclass.c +6
-0+debug ("%s: i2c highest_id %d\n" , __func__, i2c_highest_id); + +return 0 ; +} +UCLASS_DRIVER (i2c) = { .id =UCLASS_I2C , .name ="i2c" , .flags =DM_UC_FLAG_SEQ_ALIAS , + .init = i2c_uclass_init, #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) .post_bind = dm_scan_fdt_dev, #endifinclude/i2c.h +0
-0@@ -16,6 +16,9 @@#ifndef _I2C_H_#define _I2C_H_
Quoted 4 lines
include/i2c.h line 20
Quoted 2 lines
include/i2c.h +2
-0+/* Stores maximum highest i2c alias number */ +extern int i2c_highest_id;This should be in uclass-private data, not a global.
In this case there are two uclasses. UCLASS_I2C and UCLASS_I2C_MUX which has to share the same numbers. I would expect that private data will be private just for one not for both.
Reading
Quoted 4 lines
But also I feel that the behaviour needs to be consistent for all U-Boot buses, not just I2C. So can we modify the existing core DM code instead? I think a change to
uclass_resolve_seq()might be enough.
I need to check calling sequence to see if this is properly timed or not.
Thanks,
Michal
PATCH 4/4 i2c: mux: Add support for not listed sub-buses
In reply to Simon GlassQuoted 138 lines · Simon Glass
Hi Michal,
Quoted 135 lines · Michal Simek
Before this patch is applied all i2c sub-buses are using number -1 and they can't be addresses(switch to). If all busses are listed in DT alias they will get proper numbers and U-Boot can work with them. In Linux buses which are not listed in DT alias get uniq number which starts from the first highest free ID.
This is the behavior on ZynqMP zcu100-revA before this patch is applied.
Bus 0: i2c at
ff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0Bus -1: i2c at 0 Bus -1: i2c at 1 Bus -1: i2c at 2 Bus 1: i2c at ff03000074: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 5
Bus -1: i2c at 6
Bus -1: i2c at 7When the patch is applied also i2c-mux busses are listed properly.
ZynqMP> i2c bus
Bus 0: i2c atff020000
20: gpio at 20, offset len 1, flags 0
21: gpio at 21, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0 Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1 Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2 Bus 1: i2c at ff030000 (active 1)74: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0 (active 5)
54:generic_54, offset len 1, flags 0Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1 Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2 Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3 Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4 Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0 Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1 Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2 Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3 Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4 Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5 Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6 Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7Signed-off-by Michal Simek <[email protected]>---
zcu102-revA
Before this patch applied for !DM case with static description ZynqMP> i2c bus
Bus 0: zynq_0 Bus 1: zynq_0->PCA9544A at 0x75:0 Bus 2: zynq_0->PCA9544A at 0x75:1 Bus 3: zynq_0->PCA9544A at 0x75:2 Bus 4: zynq_1 Bus 5: zynq_1->PCA9548 at 0x74:0 Bus 6: zynq_1->PCA9548 at 0x74:1 Bus 7: zynq_1->PCA9548 at 0x74:2 Bus 8: zynq_1->PCA9548 at 0x74:3 Bus 9: zynq_1->PCA9548 at 0x74:4 Bus 10: zynq_1->PCA9548 at 0x75:0 Bus 11: zynq_1->PCA9548 at 0x75:1 Bus 12: zynq_1->PCA9548 at 0x75:2 Bus 13: zynq_1->PCA9548 at 0x75:3 Bus 14: zynq_1->PCA9548 at 0x75:4 Bus 15: zynq_1->PCA9548 at 0x75:5 Bus 16: zynq_1->PCA9548 at 0x75:6 Bus 17: zynq_1->PCA9548 at 0x75:7When Patch is applied with
OF_LIVE-of_alias_get_highest_id()is used ZynqMP> i2c bus
Bus 0: i2c atff020000
75: i2c-mux at 75, offset len 1, flags 0Bus 2: i2c at ff020000->i2c-mux at 75->i2c at 0 Bus 3: i2c at ff020000->i2c-mux at 75->i2c at 1 Bus 4: i2c at ff020000->i2c-mux at 75->i2c at 2 Bus 1: i2c at ff030000 74: i2c-mux at 74, offset len 1, flags 0 75: i2c-mux at 75, offset len 1, flags 0 Bus 5: i2c at ff030000->i2c-mux at 74->i2c at 0 Bus 6: i2c at ff030000->i2c-mux at 74->i2c at 1 Bus 7: i2c at ff030000->i2c-mux at 74->i2c at 2 Bus 8: i2c at ff030000->i2c-mux at 74->i2c at 3 Bus 9: i2c at ff030000->i2c-mux at 74->i2c at 4 Bus 10: i2c at ff030000->i2c-mux at 75->i2c at 0 Bus 11: i2c at ff030000->i2c-mux at 75->i2c at 1 Bus 12: i2c at ff030000->i2c-mux at 75->i2c at 2 Bus 13: i2c at ff030000->i2c-mux at 75->i2c at 3 Bus 14: i2c at ff030000->i2c-mux at 75->i2c at 4 Bus 15: i2c at ff030000->i2c-mux at 75->i2c at 5 Bus 16: i2c at ff030000->i2c-mux at 75->i2c at 6 Bus 17: i2c at ff030000->i2c-mux at 75->i2c at 7For !OF_LIVE - hardcoded number is used
ZynqMP> i2c bus
Bus 0: i2c atff020000
75: i2c-mux at 75, offset len 1, flags 0Bus 21: i2c at ff020000->i2c-mux at 75->i2c at 0 Bus 22: i2c at ff020000->i2c-mux at 75->i2c at 1 Bus 23: i2c at ff020000->i2c-mux at 75->i2c at 2 Bus 1: i2c at ff03000074: i2c-mux at 74, offset len 1, flags 0
75: i2c-mux at 75, offset len 1, flags 0
Bus 24: i2c at ff030000->i2c-mux at 74->i2c at 0
Bus 25: i2c at ff030000->i2c-mux at 74->i2c at 1
Bus 26: i2c at ff030000->i2c-mux at 74->i2c at 2
Bus 27: i2c at ff030000->i2c-mux at 74->i2c at 3
Bus 28: i2c at ff030000->i2c-mux at 74->i2c at 4
Bus 29: i2c at ff030000->i2c-mux at 75->i2c at 0
Bus 30: i2c at ff030000->i2c-mux at 75->i2c at 1
Bus 31: i2c at ff030000->i2c-mux at 75->i2c at 2
Bus 32: i2c at ff030000->i2c-mux at 75->i2c at 3
Bus 33: i2c at ff030000->i2c-mux at 75->i2c at 4
Bus 34: i2c at ff030000->i2c-mux at 75->i2c at 5
Bus 35: i2c at ff030000->i2c-mux at 75->i2c at 6
Bus 36: i2c at ff030000->i2c-mux at 75->i2c at 7
Quoted 5 lines
Quoted 3 lines
--- drivers/i2c/muxes/i2c-mux-uclass.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)This is quite a complicated issue...
and it is time to talk about it.
Quoted 41 lines
Quoted 41 lines
drivers/i2c/muxes/i2c-mux-uclass.c +20
-2@@ -9,6 +9,7 @@#include <errno.h> #include <i2c.h> #include <dm/lists.h> +#include <dm/of_access.h> #include <dm/root.h> /** @@ -59,13 +60,42 @@ static int i2c_mux_post_bind(struct udevice *mux)dev_for_each_subnode (node, mux) {struct udevice *dev;const char *name; +const char *arrow ="->" ; +char *full_name; +int parent_name_len, arrow_len, mux_name_len, name_len; name =ofnode_get_name (node); - ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , name, - node, &dev); + +/* Calculate lenghts of strings */ + parent_name_len =strlen (mux->parent->name); + arrow_len =strlen (arrow); + mux_name_len =strlen (mux->name); + name_len =strlen (name); + + full_name =calloc (1 , parent_name_len + arrow_len + + mux_name_len + arrow_len + name_len +1 ); +if (!full_name) +return -ENOMEM ; + +/* Compose bus name */ +strcat (full_name, mux->parent->name); +strcat (full_name, arrow); +strcat (full_name, mux->name);
Quoted 8 lines
drivers/i2c/muxes/i2c-mux-uclass.c static int i2c_mux_post_bind(struct udevice *mux) · line 88
Quoted 5 lines
drivers/i2c/muxes/i2c-mux-uclass.c +5
-0+strcat (full_name, arrow); +strcat (full_name, name); + + ret =device_bind_driver_to_node (mux,"i2c_mux_bus_drv" , + full_name, node, &dev);Why do we use the full name here? We can create this by looking at the parents if needed.
If you look at i2c mux description and you have 3-4 i2c muxes with proper sub bus node name like i2c at 0 for all first busses you need to distinguish that.
Linux is doing that too.
Because from this - you have no idea which bus is which.
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 0
Bus -1: i2c at 1
Bus -1: i2c at 2
Bus -1: i2c at 3
Bus -1: i2c at 4
Bus -1: i2c at 5
Bus -1: i2c at 6
Bus -1: i2c at 7
That code above is just composing bus name by looking at parent + actual node name. If you see better way how this can be done please let me know.
Quoted 11 lines
drivers/i2c/muxes/i2c-mux-uclass.c static int i2c_mux_post_bind(struct udevice *mux) · line 95
Quoted 8 lines
drivers/i2c/muxes/i2c-mux-uclass.c +4
-0debug (" - bind ret=%d, %s\n" , ret, dev ? dev->name :NULL );if (ret)return ret; + +/* If dt alias is not found start to allocate new IDs */ +if (dev->req_seq ==-1 ) + dev->req_seq = ++i2c_highest_id;As in the other patch, if we change this, I think we should do it in DM core, by adjusting
uclass_resolve_seq(). Would that work?
I have played with it and uclass_resolve_seq as is now is called when device is probed. But IMHO you need to have bus number before probe to have it listed to know where you should move by i2c dev command.
It means setting up req->seq should be done in bind phase.
Let me send you v2 of this where I fix some stuff based on your comments.
Thanks,
Michal
PATCH 1/4 dm: core: Add of_alias_get_highest_id()
In reply to Michal SimekHi Michal,
Quoted 5 lines · Michal Simek
Quoted 3 lines · Simon Glass
Hi Michal,
On Fri, 18 Jan 2019 at 08:13, Michal Simek <[email protected]>
Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
The same functionality was added to Linux for i2c bus registration
with this
Quoted 25 lines
Quoted 25 lines
Quoted 25 lines
commit message:
"
of: base: add function to get highest id of an alias stemI2C supports adding adapters using either a dynamic or fixed id. The latter is provided by aliases in the DT case. To prevent id collisions of those two types, install this function which gives us the highest fixed id, so we can then let the dynamically created ones come after this highest number.
Signed-off-by Wolfram Sang <[email protected]>Acked-by Rob Herring <[email protected]>Signed-off-by Wolfram Sang <[email protected]>"
Add it also to U-Boot for DM I2C support.
Signed-off-by Michal Simek <[email protected]>---
drivers/core/of_access.c | 18 ++++++++++++++++++ include/dm/of_access.h | 9 +++++++++ 2 files changed, 27 insertions(+)
Quoted 5 lines
Quoted 5 lines
drivers/core/of_access.c int of_alias_get_id(const struct device_node *np,
Quoted 5 lines
drivers/core/of_access.c +0
-0@@ -812,6 +812,24 @@ int of_alias_get_id(const struct device_node *np,
const char *stem)
Quoted 31 lines
Quoted 31 lines
Quoted 31 lines
drivers/core/of_access.c +18
-0return id; } +int of_alias_get_highest_id (const char *stem) +{ +struct alias_prop *app; +int id = -ENODEV ; + +mutex_lock (&of_mutex); +list_for_each_entry (app, &aliases_lookup, link) { +if (strcmp (app->stem, stem) !=0 ) +continue ; + +if (app->id > id) + id = app->id; + } +mutex_unlock (&of_mutex); + +return id; +} +struct device_node *of_get_stdout (void ) {return of_stdout;include/dm/of_access.h +0
-0@@ -425,6 +425,15 @@ int of_alias_scan(void);int of_alias_get_id (const struct device_node *np,const char *stem);
Quoted 5 lines
Quoted 5 lines
include/dm/of_access.h int of_alias_scan(void);
Quoted 5 lines
include/dm/of_access.h +4
-0/** +* of_alias_get_highest_id - Get highest alias id for the given stem +* @stem: Alias stem to be examined +* +* The function travels the lookup table to get the highest alias id
for the
Quoted 26 lines
Quoted 17 lines
include/dm/of_access.h int of_alias_scan(void); · line 432
Quoted 1 line
include/dm/of_access.h +1
-0+* given alias stem. It returns the alias id if found. @return
Quoted 10 lines
include/dm/of_access.h +4
-1+*/ +int of_alias_get_highest_id (const char *stem); + +/** * of_get_stdout() - Get node to use for stdout * * @return node referred to by stdout-path alias, or NULL if none -- 1.9.1
Can we place have a test that calls this for a few values?
Quoted 5 lines
Also see
uclass_find_next_free_req_seq()anduclass_resolve_seq()which is what U-Boot does today. It is first in, first served. This is supposed to mean that devices without an alias don't get areq_seqvalue, meaning that the seq value is set to the next available value.Let me play with it and see that calling sequence.
Quoted 8 lines
Quoted 3 lines
I suspect it is OK to change the behaviour though. It might affect some boards which rely on not having aliases but still getting bus numbers.
Do you mean with I2C? Or different buses?
I don't think there is any affected board with
DM_I2CandOF_CONTROLbecause unlisted aliases are usingreq_seq-1 now.
Yes I think that is right, actually.
Regards,
SImon
PATCH 3/4 i2c: dm: Record maximum id of devices before probing devices
In reply to Michal SimekHi Michal,
Quoted 5 lines · Michal Simek
Quoted 3 lines · Simon Glass
Hi Michal,
On Fri, 18 Jan 2019 at 08:13, Michal Simek <[email protected]>
Quoted 21 lines · wrote:
Quoted 21 lines
Quoted 21 lines
There is a need to find out the first free i2c ID which can be used for i2s buses (including i2c buses connected to i2c mux). Do it early in init and share this variable with other i2c classes for uniq bus identification.
Signed-off-by Michal Simek <[email protected]>---
drivers/i2c/i2c-uclass.c | 19 +++++++++++++++++++ include/i2c.h | 3 +++ 2 files changed, 22 insertions(+)drivers/i2c/i2c-uclass.c +0
-0@@ -23,6 +23,8 @@ enum { PIN_COUNT, };
Quoted 6 lines
Quoted 6 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice
Quoted 6 lines
drivers/i2c/i2c-uclass.c +2
-0+int i2c_highest_id =-1 ; +/* Useful debugging function */ void i2c_dump_msgs (struct i2c_msg *msg,int nmsgs) {@@ -619,10 +621,27 @@ static int i2c_child_post_bind(struct udevice
*dev)
Quoted 13 lines
Quoted 13 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice *dev)
Quoted 13 lines
drivers/i2c/i2c-uclass.c +10
-0#endif } +int i2c_uclass_init (struct uclass *class) +{ +#ifdef CONFIG_OF_LIVE +int ret; + + ret =of_alias_get_highest_id ("i2c" ); +if (ret >=0 ) + i2c_highest_id = ret; +#else + i2c_highest_id = fdtdec_get_alias_highest_id(gd->fdt_blob,
"i2c");
Quoted 34 lines
Quoted 4 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice *dev) · line 634
Quoted 1 line
drivers/i2c/i2c-uclass.c +1
-0+#endif This should call
dev_read_alias_highest_id()or similar, which does the logic you have here.not a problem with this.
Quoted 22 lines
Quoted 22 lines
drivers/i2c/i2c-uclass.c +6
-0+debug ("%s: i2c highest_id %d\n" , __func__, i2c_highest_id); + +return 0 ; +} +UCLASS_DRIVER (i2c) = { .id =UCLASS_I2C , .name ="i2c" , .flags =DM_UC_FLAG_SEQ_ALIAS , + .init = i2c_uclass_init, #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) .post_bind = dm_scan_fdt_dev, #endifinclude/i2c.h +0
-0@@ -16,6 +16,9 @@#ifndef _I2C_H_#define _I2C_H_Quoted 4 lines
include/i2c.h line 20
Quoted 2 lines
include/i2c.h +2
-0+/* Stores maximum highest i2c alias number */ +extern int i2c_highest_id;This should be in uclass-private data, not a global.
Quoted 4 lines
In this case there are two uclasses.
UCLASS_I2CandUCLASS_I2C_MUXwhich has to share the same numbers. I would expect that private data will be private just for one not for both.
Reading
Hmm I hadn't realised that. Perhaps you can wrap it in a function which looks up the I2C uclass and the private data. We should try to avoid using BSS so that I2C can be used before relocation, etc.
Quoted 7 lines
Quoted 5 lines
But also I feel that the behaviour needs to be consistent for all U-Boot buses, not just I2C. So can we modify the existing core DM code instead? I think a change to
uclass_resolve_seq()might be enough.I need to check calling sequence to see if this is properly timed or not.
OK.
Regards,
Simon
PATCH 3/4 i2c: dm: Record maximum id of devices before probing devices
so, 2. úno 2019 7:09 odesílatel Simon Glass <[email protected]> napsal:
Quoted 87 lines
Hi Michal,
Quoted 5 lines · Michal Simek
Quoted 3 lines · Simon Glass
Hi Michal,
On Fri, 18 Jan 2019 at 08:13, Michal Simek <[email protected]>
Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
There is a need to find out the first free i2c ID which can be used
for
Quoted 19 lines
Quoted 19 lines
Quoted 19 lines
i2s buses (including i2c buses connected to i2c mux). Do it early in init and share this variable with other i2c classes for uniq bus identification.
Signed-off-by Michal Simek <[email protected]>---
drivers/i2c/i2c-uclass.c | 19 +++++++++++++++++++ include/i2c.h | 3 +++ 2 files changed, 22 insertions(+)drivers/i2c/i2c-uclass.c +0
-0@@ -23,6 +23,8 @@ enum { PIN_COUNT, };Quoted 6 lines
Quoted 6 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice
Quoted 6 lines
drivers/i2c/i2c-uclass.c +2
-0+int i2c_highest_id =-1 ; +/* Useful debugging function */ void i2c_dump_msgs (struct i2c_msg *msg,int nmsgs) {@@ -619,10 +621,27 @@ static int i2c_child_post_bind(struct udevice*dev)
Quoted 13 lines
Quoted 13 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice *dev)
Quoted 13 lines
drivers/i2c/i2c-uclass.c +10
-0#endif } +int i2c_uclass_init (struct uclass *class) +{ +#ifdef CONFIG_OF_LIVE +int ret; + + ret =of_alias_get_highest_id ("i2c" ); +if (ret >=0 ) + i2c_highest_id = ret; +#else + i2c_highest_id = fdtdec_get_alias_highest_id(gd->fdt_blob,"i2c");
Quoted 34 lines
Quoted 4 lines
drivers/i2c/i2c-uclass.c static int i2c_child_post_bind(struct udevice *dev) · line 634
Quoted 1 line
drivers/i2c/i2c-uclass.c +1
-0+#endif This should call
dev_read_alias_highest_id()or similar, which does the logic you have here.not a problem with this.
Quoted 26 lines
Quoted 19 lines
drivers/i2c/i2c-uclass.c +6
-0+debug ("%s: i2c highest_id %d\n" , __func__, i2c_highest_id); + +return 0 ; +} +UCLASS_DRIVER (i2c) = { .id =UCLASS_I2C , .name ="i2c" , .flags =DM_UC_FLAG_SEQ_ALIAS , + .init = i2c_uclass_init, #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) .post_bind = dm_scan_fdt_dev, #endifinclude/i2c.h +0
-0include/i2c.h line 20
Quoted 5 lines
include/i2c.h +2
-0@@ -16,6 +16,9 @@#ifndef _I2C_H_#define _I2C_H_ +/* Stores maximum highest i2c alias number */ +extern int i2c_highest_id;This should be in uclass-private data, not a global.
Quoted 9 lines
Quoted 4 lines
In this case there are two uclasses.
UCLASS_I2CandUCLASS_I2C_MUXwhich has to share the same numbers. I would expect that private data will be private just for one not for both.
ReadingHmm I hadn't realised that. Perhaps you can wrap it in a function which looks up the I2C uclass and the private data. We should try to avoid using BSS so that I2C can be used before relocation, etc.
I was wrong on this one. Také a look at v2.
M
Quoted 17 lines
Quoted 7 lines
Quoted 5 lines
But also I feel that the behaviour needs to be consistent for all U-Boot buses, not just I2C. So can we modify the existing core DM code instead? I think a change to
uclass_resolve_seq()might be enough.I need to check calling sequence to see if this is properly timed or not.
OK.
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot