Enable accelerated OpenGL in qemu
cover Enable accelerated OpenGL in qemu
V2 changes: addressed feedback from the first review round V3 changes:
- better fix for missing qemu X11 include, as discussed with upstream
- maintainers.inc entry for virglrenderer
- egl-headless support (see below for details)
- improvements to kmscube recipe
- fix to vte-native to allow building it with gcc 4.8
V4 changes
- address failures uncovered by yocto autobuilder
V5 changes
- remove patches that have been merged to master
- replace BBCLASSEXTEND_remove with PREFERRED_PROVIDER for mesa recipe variants
V6 changes
- again rebase to master
- tweak oe-selftest to remove unnecessary re-builds of qemu-native
Why this? Why now?
1. I think we are heading towards a reality where some kind of working GL is a 'must' for any kind of UI work.
2. Typically people build images and then transfer them to the NUC or even target boards for testing - using qemu would be less awkward.
3. Current qemu configuration is basically useless here, as it only provides a very slow software GL driver from mesa.
0. TLDR:
a) Gtk UI frontend
$ . oe-init-build-env build-virgl $ bitbake core-image-sato-sdk $ runqemu kvm gl $$ run glxgears or any other GL-capable binary inside qemu
b) egl-headless
$ . oe-init-build-env build-virgl $ bitbake core-image-sato-sdk $ runqemu kvm egl-headless publicvnc $ <connect with a vnc viewer to 127.0.0.1:5900> $$ run glxgears or any other GL-capable binary inside qemu
1. For the local UI, qemu is switched over to use gtk frontend. I simply couldn't get SDL frontend to work properly, it only displays a blank black window or doesn't start at all. Same thing happens with qemu binaries provided by Fedora and opensuse (Ubuntu's qemu lacks virgl support). Seems like SDL support has regressed.
2. What is egl-headless?
In this variant, Qemu does not open a UI window at all. Instead, it renders all graphics, including GL, into a memory buffer, which can be seen with a vnc or spice client (over a TCP socket). This has the following advantages:
- no need to be physically present at the host machine, output (including GL bits!) can be seen remotely
- no need for the host machine to run an X session
3. While the components are built against the most minimum necessary mesa-native set (gbm, egl, dri with no drivers), libepoxy loads and uses the host GL implementation (through a chrpath hack). This is both to save build times, and because the host is likely to have a set of drivers more appropriate for the physical machine (e.g. proprietary nvidia stack, although I didn't test that).
4. I tested this with
- glamor X server
- weston compositor with drm backend (build core-image-weston, then edit weston.ini in the image to use drm backed instead of fbdev).
- kmscube
- glxgears
- https://www.geeks3d.com/gputest/
The latter two show FPS that is similar to running them directly on the host.
5. Some things I am not sure about:
- how much of a 'default' should this be for running qemu. It works for me,
but other people might find it less stable compared to the existing sdl-vmware-swrast setup.
- what other tests and demos could be run
- how could this be tested on the autobuilder. I wrote two oe-selftests for this (gtk, egl-headless), but one of them does require an X session, and both require ability to create opengl contexts on the host.
The following changes since commit 29099c8a49bf9d35514bbc1e77657655598a80cc:
maintainers.inc: replace Changhyeok Bae's @lge email address with a personal one (2019-02-08 10:57:19 +0000)
are available in the Git repository at:
git://git.yoctoproject.org/poky-contrib akanavin/virgl-gtk
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=akanavin/virgl-gtk
Alexander Kanavin (12):
virglrenderer: add a recipe
qemu: enable virglrenderer and glx options for native/nativesdk builds local.conf.sample: adjust the qemu config to enable gtk+ instead of
sdl
qemu: build target variant with gtk+, and nativesdk variant without
sdl
qemu: remove support for building against host sdl
qemu: add a gettext-native dependency to gtk option
qemu: add a patch to avoid a missing definition error
qemu: add environment variable wrappers to make qemu look good with
gtk frontend
qemu: add a backported patch to fix egl-headless support
runqemu: add options for enabling virgl GL acceleration
runqemu: do not check for GL libraries
selftest: add tests for virgl GL acceleration
meta-poky/conf/local.conf.sample | 9 +-- meta-selftest/lib/oeqa/runtime/cases/virgl.py | 28 ++++++++ meta/conf/distro/include/maintainers.inc | 1 + meta/lib/oeqa/selftest/cases/runtime_test.py | 52 +++++++++++++++ meta/recipes-devtools/qemu/qemu.inc | 41 +++++++----- .../qemu/0001-Add-a-missing-X11-include.patch | 65 +++++++++++++++++++ ...-egl-headless-add-egl_create_context.patch | 50 ++++++++++++++ ...x-libcap-header-issue-on-some-distro.patch | 2 +- ...-messages-when-qemi_cpu_kick_thread-.patch | 2 +- meta/recipes-devtools/qemu/qemu_3.1.0.bb | 2 + .../0001-vtest-add-missing-includes.patch | 38 +++++++++++ .../virglrenderer/virglrenderer_git.bb | 19 ++++++ scripts/runqemu | 58 +++++++---------- 13 files changed, 309 insertions(+), 58 deletions(-) create mode 100644 meta-selftest/lib/oeqa/runtime/cases/virgl.py create mode 100644 meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch create mode 100644 meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer_git.bb
Signature · 1 line
2.17.1
PATCH 1/12 virglrenderer: add a recipe
This component enables hardware-accelerated GL inside QEMU guests. For more information, see here:
https://lwn.net/Articles/767970/
https://www.collabora.com/news-and-blog/blog/2018/02/12/virtualizing-gpu-access/
https://www.collabora.com/news-and-blog/blog/2018/05/09/gpu-virtualization-update/
--- meta/conf/distro/include/maintainers.inc | 1 + .../0001-vtest-add-missing-includes.patch | 38 +++++++++++++++++++ .../virglrenderer/virglrenderer_git.bb | 19 ++++++++++ 3 files changed, 58 insertions(+) create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer_git.bb
meta/conf/distro/include/maintainers.inc +1 -0
@@ -700,6 +700,7 @@ RECIPE_MAINTAINER_pn-util-macros = "Armin Kuster <[email protected]>" RECIPE_MAINTAINER_pn-v86d = "Alexander Kanavin <[email protected]>" RECIPE_MAINTAINER_pn-vala = "Alexander Kanavin <[email protected]>" RECIPE_MAINTAINER_pn-valgrind = "Alexander Kanavin <[email protected]>" +RECIPE_MAINTAINER_pn-virglrenderer = "Alexander Kanavin <[email protected]>" RECIPE_MAINTAINER_pn-volatile-binds = "Chen Qi <[email protected]>" RECIPE_MAINTAINER_pn-vte = "Anuj Mittal <[email protected]>" RECIPE_MAINTAINER_pn-vulkan = "Ross Burton <[email protected]>"
meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch new file +38 -0
@@ -0,0 +1,38 @@ +From 05c5c5f43fbffb3317bd9da27d414890d2ef493c Mon Sep 17 00:00:00 2001 +From: Alexander Kanavin <[email protected]> +Date: Fri, 18 Jan 2019 13:47:23 +0100 +Subject: [PATCH] vtest: add missing includes + +This fixes build failures with musl C library + +Upstream-Status: Submitted [https://gitlab.freedesktop.org/virgl/virglrenderer/merge_requests/125] +Signed-off-by: Alexander Kanavin <[email protected]> +--- + vtest/util.c | 1 + + vtest/vtest_server.c | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/vtest/util.c b/vtest/util.c +index 0d3c78f..c605253 100644 +--- a/vtest/util.c ++++ b/vtest/util.c +@@ -26,6 +26,7 @@ + #include <stdio.h> + #include <string.h> + #include <unistd.h> ++#include <sys/select.h> + + int vtest_wait_for_fd_read(int fd) + { +diff --git a/vtest/vtest_server.c b/vtest/vtest_server.c +index bc6c95f..010721f 100644 +--- a/vtest/vtest_server.c ++++ b/vtest/vtest_server.c +@@ -31,6 +31,7 @@ + #include <netinet/in.h> + #include <sys/un.h> + #include <fcntl.h> ++#include <string.h> + + #include "util.h" + #include "vtest.h"
meta/recipes-graphics/virglrenderer/virglrenderer_git.bb new file +19 -0
@@ -0,0 +1,19 @@ +SUMMARY = "VirGL virtual OpenGL renderer" +HOMEPAGE = "https://virgil3d.github.io/" + +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING;md5=c81c08eeefd9418fca8f88309a76db10" + +DEPENDS = "libdrm mesa libepoxy" +PV = "0.7.0" +SRCREV = "402c228861c9893f64cffbbcb4cb23044b8c721c" +SRC_URI = "git://anongit.freedesktop.org/virglrenderer \ + file://0001-vtest-add-missing-includes.patch \ + " + +S = "${WORKDIR}/git" + +inherit autotools pkgconfig + +BBCLASSEXTEND = "native nativesdk" +
Signature · 1 line
2.17.1
PATCH 2/12 qemu: enable virglrenderer and glx options for native/nativesdk builds
In reply to Alexander KanavinExcept for ming32/darwin, which do not support them.
--- meta/recipes-devtools/qemu/qemu.inc | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
meta/recipes-devtools/qemu/qemu.inc +5 -5
@@ -74,15 +74,15 @@ PACKAGECONFIG ??= " \ fdt sdl kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ " -PACKAGECONFIG_class-native ??= "fdt alsa kvm" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm" +PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx" # Handle distros such as CentOS 5 32-bit that do not have kvm support PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}" -# Disable kvm on targets that do not support it -PACKAGECONFIG_remove_darwin = "kvm" -PACKAGECONFIG_remove_mingw32 = "kvm" +# Disable kvm/virgl/mesa on targets that do not support it +PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+" +PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+" PACKAGECONFIG[sdl] = "--enable-sdl --with-sdlabi=2.0,--disable-sdl,libsdl2" PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr,--disable-virtfs,libcap attr,"
Signature · 1 line
2.17.1
PATCH 3/12 local.conf.sample: adjust the qemu config to enable gtk+ instead of sdl
In reply to Alexander Kanavin--- meta-poky/conf/local.conf.sample | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
meta-poky/conf/local.conf.sample +3 -6
@@ -236,12 +236,9 @@ BB_DISKMON_DIRS ??= "\ # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl2-native will -# be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" -PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl2-native" +# seen. The two lines below enable the Gtk UI frontend. +PACKAGECONFIG_append_pn-qemu-native = " gtk+" +PACKAGECONFIG_append_pn-nativesdk-qemu = " gtk+" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if
Signature · 1 line
2.17.1
PATCH 4/12 qemu: build target variant with gtk+, and nativesdk variant without sdl
In reply to Alexander KanavinAs sdl is deprecated in favor of gtk+, it should not be the default.
--- meta/recipes-devtools/qemu/qemu.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
meta/recipes-devtools/qemu/qemu.inc +2 -2
@@ -71,11 +71,11 @@ do_install_append() { # END of qemu-mips workaround PACKAGECONFIG ??= " \ - fdt sdl kvm \ + fdt gtk+ kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ " PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt kvm virglrenderer glx" # Handle distros such as CentOS 5 32-bit that do not have kvm support PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
Signature · 1 line
2.17.1
PATCH 5/12 qemu: remove support for building against host sdl
In reply to Alexander KanavinThis hasn't been the default for a long time (as some distros don't support it), and with gtk+ being the new default shouldn't be needed at all.
--- meta/recipes-devtools/qemu/qemu.inc | 8 -------- 1 file changed, 8 deletions(-)
meta/recipes-devtools/qemu/qemu.inc +0 -8
@@ -39,14 +39,6 @@ export LIBTOOL="${HOST_SYS}-libtool" B = "${WORKDIR}/build" -do_configure_prepend_class-native() { - # Append build host pkg-config paths for native target since the host may provide sdl - BHOST_PKGCONFIG_PATH=$(PATH=/usr/bin:/bin pkg-config --variable pc_path pkg-config || echo "") - if [ ! -z "$BHOST_PKGCONFIG_PATH" ]; then - export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:$BHOST_PKGCONFIG_PATH - fi -} - do_configure() { ${S}/configure ${EXTRA_OECONF} }
Signature · 1 line
2.17.1
PATCH 6/12 qemu: add a gettext-native dependency to gtk option
In reply to Alexander Kanavinxgettext/msgmerge is used during do_install() when gtk is enabled:
https://github.com/qemu/qemu/blob/master/Makefile#L743
--- meta/recipes-devtools/qemu/qemu.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-devtools/qemu/qemu.inc +1 -1
@@ -87,7 +87,7 @@ PACKAGECONFIG[vnc-png] = "--enable-vnc --enable-vnc-png,--disable-vnc-png,libpng PACKAGECONFIG[libcurl] = "--enable-curl,--disable-curl,libcurl," PACKAGECONFIG[nss] = "--enable-smartcard,--disable-smartcard,nss," PACKAGECONFIG[curses] = "--enable-curses,--disable-curses,ncurses," -PACKAGECONFIG[gtk+] = "--enable-gtk --enable-vte,--disable-gtk --disable-vte,gtk+3 vte" +PACKAGECONFIG[gtk+] = "--enable-gtk --enable-vte,--disable-gtk --disable-vte,gtk+3 vte gettext-native" PACKAGECONFIG[libcap-ng] = "--enable-cap-ng,--disable-cap-ng,libcap-ng," PACKAGECONFIG[ssh2] = "--enable-libssh2,--disable-libssh2,libssh2," PACKAGECONFIG[gcrypt] = "--enable-gcrypt,--disable-gcrypt,libgcrypt,"
Signature · 1 line
2.17.1
PATCH 7/12 qemu: add a patch to avoid a missing definition error
In reply to Alexander Kanavin| In file included from /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/include/ui/egl-context.h:5, | from /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/ui/egl-context.c:3: | /home/alexander/development/poky/build-virgl-gtk-64/tmp/work/x86_64-nativesdk-pokysdk-linux/nativesdk-qemu/3.1.0-r0/qemu-3.1.0/include/ui/egl-helpers.h:46:55: error: unknown type name 'Window'; did you mean 'minor'? | EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win); | ^~~~~~ | minor
--- .../qemu/0001-Add-a-missing-X11-include.patch | 65 +++++++++++++++++++ ...x-libcap-header-issue-on-some-distro.patch | 2 +- ...-messages-when-qemi_cpu_kick_thread-.patch | 2 +- meta/recipes-devtools/qemu/qemu_3.1.0.bb | 1 + 4 files changed, 68 insertions(+), 2 deletions(-) create mode 100644 meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch
meta/recipes-devtools/qemu/qemu/0001-Add-a-missing-X11-include.patch new file +65 -0
@@ -0,0 +1,65 @@ +From eb1a215a4f86dde4493c3e22ad9f6d698850915e Mon Sep 17 00:00:00 2001 +From: Alexander Kanavin <[email protected]> +Date: Thu, 20 Dec 2018 18:06:29 +0100 +Subject: [PATCH] egl-helpers.h: do not depend on X11 Window type, use + EGLNativeWindowType + +It was assumed that mesa provides the necessary X11 includes, +but it is not always the case, as it can be configured without x11 support. + +Upstream-Status: Submitted [http://lists.nongnu.org/archive/html/qemu-devel/2019-01/msg03706.html] +Signed-off-by: Alexander Kanavin <[email protected]> + +--- + include/ui/egl-helpers.h | 2 +- + ui/egl-helpers.c | 4 ++-- + ui/gtk-egl.c | 2 +- + 3 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/include/ui/egl-helpers.h b/include/ui/egl-helpers.h +index 9db7293b..3fc656a7 100644 +--- a/include/ui/egl-helpers.h ++++ b/include/ui/egl-helpers.h +@@ -43,7 +43,7 @@ void egl_dmabuf_release_texture(QemuDmaBuf *dmabuf); + + #endif + +-EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win); ++EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, EGLNativeWindowType win); + + int qemu_egl_init_dpy_x11(EGLNativeDisplayType dpy, DisplayGLMode mode); + int qemu_egl_init_dpy_mesa(EGLNativeDisplayType dpy, DisplayGLMode mode); +diff --git a/ui/egl-helpers.c b/ui/egl-helpers.c +index 4f475142..5e115b3f 100644 +--- a/ui/egl-helpers.c ++++ b/ui/egl-helpers.c +@@ -273,14 +273,14 @@ void egl_dmabuf_release_texture(QemuDmaBuf *dmabuf) + + /* ---------------------------------------------------------------------- */ + +-EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, Window win) ++EGLSurface qemu_egl_init_surface_x11(EGLContext ectx, EGLNativeWindowType win) + { + EGLSurface esurface; + EGLBoolean b; + + esurface = eglCreateWindowSurface(qemu_egl_display, + qemu_egl_config, +- (EGLNativeWindowType)win, NULL); ++ win, NULL); + if (esurface == EGL_NO_SURFACE) { + error_report("egl: eglCreateWindowSurface failed"); + return NULL; +diff --git a/ui/gtk-egl.c b/ui/gtk-egl.c +index 5420c236..1f941162 100644 +--- a/ui/gtk-egl.c ++++ b/ui/gtk-egl.c +@@ -54,7 +54,7 @@ void gd_egl_init(VirtualConsole *vc) + } + + vc->gfx.ectx = qemu_egl_init_ctx(); +- vc->gfx.esurface = qemu_egl_init_surface_x11(vc->gfx.ectx, x11_window); ++ vc->gfx.esurface = qemu_egl_init_surface_x11(vc->gfx.ectx, (EGLNativeWindowType)x11_window); + + assert(vc->gfx.esurface); + }
meta/recipes-devtools/qemu/qemu/0012-fix-libcap-header-issue-on-some-distro.patch +1 -1
@@ -1,4 +1,4 @@ -From 091a16100a7e1e9e6493663392c5ba2884b99723 Mon Sep 17 00:00:00 2001 +From d3e0b8dac7c2eb20d7fcff747bc98b981f4398ef Mon Sep 17 00:00:00 2001 From: Hongxu Jia <[email protected]> Date: Tue, 12 Mar 2013 09:54:06 +0800 Subject: [PATCH] fix libcap header issue on some distro
meta/recipes-devtools/qemu/qemu/0013-cpus.c-Add-error-messages-when-qemi_cpu_kick_thread-.patch +1 -1
@@ -1,4 +1,4 @@ -From 3eeeaa45dd12c9f3942cfc8647a08c93fffe19ea Mon Sep 17 00:00:00 2001 +From 861c522df7791d7e93743d5641f3ef2a5a3c4632 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?An=C3=ADbal=20Lim=C3=B3n?= <[email protected]> Date: Wed, 12 Aug 2015 15:11:30 -0500 Subject: [PATCH] cpus.c: Add error messages when qemi_cpu_kick_thread fails.
meta/recipes-devtools/qemu/qemu_3.1.0.bb +1 -0
@@ -21,6 +21,7 @@ SRC_URI = "https://download.qemu.org/${BPN}-${PV}.tar.xz \ file://0009-apic-fixup-fallthrough-to-PIC.patch \ file://0010-linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch \ file://0011-Revert-linux-user-fix-mmap-munmap-mprotect-mremap-sh.patch \ + file://0001-Add-a-missing-X11-include.patch \ " UPSTREAM_CHECK_REGEX = "qemu-(?P<pver>\d+(\.\d+)+)\.tar"
Signature · 1 line
2.17.1
PATCH 8/12 qemu: add environment variable wrappers to make qemu look good with gtk frontend
In reply to Alexander KanavinGTK_THEME instructs gtk to use its built-in theme. Otherwise gtk attempts to use the theme from the host, which may be from a totally mismatching gtk version.
On the other hand FONTCONFIG_PATH tells it to use the host fonts, as providing fonts in the native sysroot and instructing the components to use them is a lot more tricky.
GDK_PIXBUF_MODULE_FILE is set, because otherwise qemu works but fills stdout with error messages, which eventually fill the pipe they go into. That pipe is read from only when qemu exits (to collect any error messages) by runqemu script. The pipe fill-up causes the qemu process to lock up.
--- meta/recipes-devtools/qemu/qemu.inc | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
meta/recipes-devtools/qemu/qemu.inc +19 -0
@@ -48,6 +48,25 @@ do_install () { oe_runmake 'DESTDIR=${D}' install } +make_qemu_wrapper() { + gdk_pixbuf_module_file=`pkg-config --variable=gdk_pixbuf_cache_file gdk-pixbuf-2.0` + + for tool in `ls ${D}${bindir}/qemu-system-*`; do + create_wrapper $tool \ + GDK_PIXBUF_MODULE_FILE=$gdk_pixbuf_module_file \ + FONTCONFIG_PATH=/etc/fonts \ + GTK_THEME=Adwaita + done +} + +do_install_append_class-native() { + ${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)} +} + +do_install_append_class-nativesdk() { + ${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)} +} + # The following fragment will create a wrapper for qemu-mips user emulation # binary in order to work around a segmentation fault issue. Basically, by # default, the reserved virtual address space for 32-on-64 bit is set to 4GB.
Signature · 1 line
2.17.1
PATCH 9/12 qemu: add a backported patch to fix egl-headless support
In reply to Alexander Kanavin--- ...-egl-headless-add-egl_create_context.patch | 50 +++++++++++++++++++ meta/recipes-devtools/qemu/qemu_3.1.0.bb | 1 + 2 files changed, 51 insertions(+) create mode 100644 meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch
meta/recipes-devtools/qemu/qemu/0001-egl-headless-add-egl_create_context.patch new file +50 -0
@@ -0,0 +1,50 @@ +From 952e5d584f5aabe41298c278065fe628f3f7aa7a Mon Sep 17 00:00:00 2001 +From: Gerd Hoffmann <[email protected]> +Date: Thu, 29 Nov 2018 13:35:02 +0100 +Subject: [PATCH] egl-headless: add egl_create_context + +We must set the correct context (via eglMakeCurrent) before +calling qemu_egl_create_context, so we need a thin wrapper and can't +hook qemu_egl_create_context directly as ->dpy_gl_ctx_create callback. + +Reported-by: Frederik Carlier <[email protected]> +Signed-off-by: Gerd Hoffmann <[email protected]> +Message-id: [email protected] + +Upstream-Status: Backport [https://git.qemu.org/?p=qemu.git;a=commit;h=952e5d584f5aabe41298c278065fe628f3f7aa7a] +Signed-off-by: Alexander Kanavin <[email protected]> +--- + ui/egl-headless.c | 10 +++++++++- + 1 file changed, 9 insertions(+), 1 deletion(-) + +diff --git a/ui/egl-headless.c b/ui/egl-headless.c +index 4cf3bbc0e4..519e7bad32 100644 +--- a/ui/egl-headless.c ++++ b/ui/egl-headless.c +@@ -38,6 +38,14 @@ static void egl_gfx_switch(DisplayChangeListener *dcl, + edpy->ds = new_surface; + } + ++static QEMUGLContext egl_create_context(DisplayChangeListener *dcl, ++ QEMUGLParams *params) ++{ ++ eglMakeCurrent(qemu_egl_display, EGL_NO_SURFACE, EGL_NO_SURFACE, ++ qemu_egl_rn_ctx); ++ return qemu_egl_create_context(dcl, params); ++} ++ + static void egl_scanout_disable(DisplayChangeListener *dcl) + { + egl_dpy *edpy = container_of(dcl, egl_dpy, dcl); +@@ -150,7 +158,7 @@ static const DisplayChangeListenerOps egl_ops = { + .dpy_gfx_update = egl_gfx_update, + .dpy_gfx_switch = egl_gfx_switch, + +- .dpy_gl_ctx_create = qemu_egl_create_context, ++ .dpy_gl_ctx_create = egl_create_context, + .dpy_gl_ctx_destroy = qemu_egl_destroy_context, + .dpy_gl_ctx_make_current = qemu_egl_make_context_current, + .dpy_gl_ctx_get_current = qemu_egl_get_current_context, +-- +2.17.1 +
meta/recipes-devtools/qemu/qemu_3.1.0.bb +1 -0
@@ -22,6 +22,7 @@ SRC_URI = "https://download.qemu.org/${BPN}-${PV}.tar.xz \ file://0010-linux-user-Fix-webkitgtk-hangs-on-32-bit-x86-target.patch \ file://0011-Revert-linux-user-fix-mmap-munmap-mprotect-mremap-sh.patch \ file://0001-Add-a-missing-X11-include.patch \ + file://0001-egl-headless-add-egl_create_context.patch \ " UPSTREAM_CHECK_REGEX = "qemu-(?P<pver>\d+(\.\d+)+)\.tar"
Signature · 1 line
2.17.1
PATCH 10/12 runqemu: add options for enabling virgl GL acceleration
In reply to Alexander Kanavin--- scripts/runqemu | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
scripts/runqemu +23 -0
@@ -74,6 +74,9 @@ of the following environment variables (in any order): MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified) Simplified QEMU command-line options can be passed with: nographic - disable video console + gl - enable virgl-based GL acceleration + gl-es - enable virgl-based GL acceleration, using OpenGL ES + egl-headless - enable headless EGL output; use vnc or spice to see it serial - enable a serial console on /dev/ttyS0 serialstdio - enable a serial console on the console (regardless of graphics mode) slirp - enable user networking, no root privileges is required
@@ -433,6 +436,26 @@ class BaseConfig(object): elif arg == 'nographic': self.qemu_opt_script += ' -nographic' self.kernel_cmdline_script += ' console=ttyS0' + elif arg == 'gl': + self.qemu_opt_script += ' -vga virtio -display gtk,gl=on' + elif arg == 'gl-es': + self.qemu_opt_script += ' -vga virtio -display gtk,gl=es' + elif arg == 'egl-headless': + self.qemu_opt_script += ' -vga virtio -display egl-headless' + # As runqemu can be run within bitbake (when using testimage, for example), + # we need to ensure that we run host pkg-config, and that it does not + # get mis-directed to native build paths set by bitbake. + try: + del os.environ['PKG_CONFIG_PATH'] + del os.environ['PKG_CONFIG_DIR'] + del os.environ['PKG_CONFIG_LIBDIR'] + except KeyError: + pass + try: + dripath = subprocess.check_output("PATH=/bin:/usr/bin:$PATH pkg-config --variable=dridriverdir dri", shell=True) + except subprocess.CalledProcessError as e: + raise RunQemuError("Could not determine the path to dri drivers on the host via pkg-config.\nPlease install Mesa development files (particularly, dri.pc) on the host machine.") + os.environ['LIBGL_DRIVERS_PATH'] = dripath.decode('utf-8').strip() elif arg == 'serial': self.kernel_cmdline_script += ' console=ttyS0' self.serialconsole = True
Signature · 1 line
2.17.1
PATCH 11/12 runqemu: do not check for GL libraries
In reply to Alexander Kanavinqemu has been using libepoxy for a long time, and libepoxy loads GL via dlopen() only when instructed to.
--- scripts/runqemu | 35 ----------------------------------- 1 file changed, 35 deletions(-)
scripts/runqemu +0 -35
@@ -118,39 +118,6 @@ def check_tun(): if not os.access(dev_tun, os.W_OK): raise RunQemuError("TUN control device %s is not writable, please fix (e.g. sudo chmod 666 %s)" % (dev_tun, dev_tun)) -def check_libgl(qemu_bin): - cmd = ('ldd', qemu_bin) - logger.debug('Running %s...' % str(cmd)) - need_gl = subprocess.check_output(cmd).decode('utf-8') - if re.search('libGLU', need_gl): - # We can't run without a libGL.so - libgl = False - check_files = (('/usr/lib/libGL.so', '/usr/lib/libGLU.so'), \ - ('/usr/lib64/libGL.so', '/usr/lib64/libGLU.so'), \ - ('/usr/lib/*-linux-gnu/libGL.so', '/usr/lib/*-linux-gnu/libGLU.so')) - - for (f1, f2) in check_files: - if re.search('\*', f1): - for g1 in glob.glob(f1): - if libgl: - break - if os.path.exists(g1): - for g2 in glob.glob(f2): - if os.path.exists(g2): - libgl = True - break - if libgl: - break - else: - if os.path.exists(f1) and os.path.exists(f2): - libgl = True - break - if not libgl: - logger.error("You need libGL.so and libGLU.so to exist in your library path to run the QEMU emulator.") - logger.error("Ubuntu package names are: libgl1-mesa-dev and libglu1-mesa-dev.") - logger.error("Fedora package names are: mesa-libGL-devel mesa-libGLU-devel.") - raise RunQemuError('%s requires libGLU, but not found' % qemu_bin) - def get_first_file(cmds): """Return first file found in wildcard cmds""" for cmd in cmds:
@@ -1178,8 +1145,6 @@ class BaseConfig(object): if not os.access(qemu_bin, os.X_OK): raise OEPathError("No QEMU binary '%s' could be found" % qemu_bin) - check_libgl(qemu_bin) - self.qemu_opt = "%s %s %s %s" % (qemu_bin, self.get('NETWORK_CMD'), self.get('ROOTFS_OPTIONS'), self.get('QB_OPT_APPEND')) for ovmf in self.ovmf_bios:
Signature · 1 line
2.17.1
PATCH 12/12 selftest: add tests for virgl GL acceleration
In reply to Alexander KanavinNote that the tests require that the host machine has a X display, has mesa development files installed and is able to create OpenGL contexts.
--- meta-selftest/lib/oeqa/runtime/cases/virgl.py | 28 ++++++++++ meta/lib/oeqa/selftest/cases/runtime_test.py | 52 +++++++++++++++++++ 2 files changed, 80 insertions(+) create mode 100644 meta-selftest/lib/oeqa/runtime/cases/virgl.py
meta-selftest/lib/oeqa/runtime/cases/virgl.py new file +28 -0
@@ -0,0 +1,28 @@ +from oeqa.runtime.case import OERuntimeTestCase +from oeqa.core.decorator.depends import OETestDepends +import subprocess +import oe + +class VirglTest(OERuntimeTestCase): + + @OETestDepends(['ssh.SSHTest.test_ssh']) + def test_kernel_driver(self): + status, output = self.target.run('dmesg|grep virgl') + self.assertEqual(status, 0, "Checking for virgl driver in dmesg returned non-zero: %d\n%s" % (status, output)) + self.assertIn("virgl 3d acceleration enabled", output, "virgl acceleration seems to be disabled:\n%s" %(output)) + + @OETestDepends(['virgl.VirglTest.test_kernel_driver']) + def test_kmscube(self): + from fnmatch import fnmatch + + try: + distro = oe.lsb.distro_identifier() + except Exception: + distro = None + + if distro and fnmatch(distro, 'centos-7'): + self.skipTest('kmscube is not working when centos 7 is the host OS') + + status, output = self.target.run('kmscube', timeout=30) + self.assertEqual(status, 0, "kmscube exited with non-zero status %d and output:\n%s" %(status, output)) + self.assertIn('renderer: "virgl"', output, "kmscube does not seem to use virgl:\n%s" %(output))
meta/lib/oeqa/selftest/cases/runtime_test.py +52 -0
58 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH 04/12] qemu: build target variant with gtk+, and nativesdk variant without sdl
In reply to Alexander KanavinI may be nitpicking slightly, but this patch 4 and 3 should probably be combined.. I looked at '3' and went "this looks wrong, I have no idea why".. then saw '4' and it became clear. Since they're both tied together (same purpose) it may make sense to combine them...
Quoted 1 line · Alexander Kanavin
As sdl is deprecated in favor of gtk+, it should not be the default.
At a minimum the commit message above should be included in 3/12.
--Mark
Quoted 24 lines
Signed-off-by Alexander Kanavin <[email protected]>--- meta/recipes-devtools/qemu/qemu.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)meta/recipes-devtools/qemu/qemu.inc +2
-2@@ -71,11 +71,11 @@ do_install_append() { # END of qemu-mips workaround PACKAGECONFIG ??= " \ - fdt sdl kvm \ + fdt gtk+ kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ " PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt kvm virglrenderer glx" # Handle distros such as CentOS 5 32-bit that do not have kvm support PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
Re: [PATCH 04/12] qemu: build target variant with gtk+, and nativesdk variant without sdl
Patch 3 changes things in meta-poky/, and patch 4 changes things in meta/, so they cannot be combined unfortunately. I can however swap their order, so that there is less confusion.
Alex
Quoted 38 lines · Mark Hatle
I may be nitpicking slightly, but this patch 4 and 3 should probably be combined.. I looked at '3' and went "this looks wrong, I have no idea why".. then saw '4' and it became clear. Since they're both tied together (same purpose) it may make sense to combine them...
Quoted 1 line · Alexander Kanavin
As sdl is deprecated in favor of gtk+, it should not be the default.
At a minimum the commit message above should be included in 3/12.
--Mark
Quoted 24 lines
Signed-off-by Alexander Kanavin <[email protected]>--- meta/recipes-devtools/qemu/qemu.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)meta/recipes-devtools/qemu/qemu.inc +2
-2@@ -71,11 +71,11 @@ do_install_append() { # END of qemu-mips workaround PACKAGECONFIG ??= " \ - fdt sdl kvm \ + fdt gtk+ kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ " PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt kvm virglrenderer glx" # Handle distros such as CentOS 5 32-bit that do not have kvm support PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
Re: [PATCH 04/12] qemu: build target variant with gtk+, and nativesdk variant without sdl
Quoted 3 lines · Alexander Kanavin
Patch 3 changes things in meta-poky/, and patch 4 changes things in meta/, so they cannot be combined unfortunately. I can however swap their order, so that there is less confusion.
Swap the order and add a copy of the commit message (from 4 to 3) then. That should lesson anyone's questions if they need to figure out why it changed in the future.
Thanks!
--Mark
Quoted 41 lines
Alex
Quoted 38 lines · Mark Hatle
I may be nitpicking slightly, but this patch 4 and 3 should probably be combined.. I looked at '3' and went "this looks wrong, I have no idea why".. then saw '4' and it became clear. Since they're both tied together (same purpose) it may make sense to combine them...
Quoted 1 line · Alexander Kanavin
As sdl is deprecated in favor of gtk+, it should not be the default.
At a minimum the commit message above should be included in 3/12.
--Mark
Quoted 24 lines
Signed-off-by Alexander Kanavin <[email protected]>--- meta/recipes-devtools/qemu/qemu.inc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)meta/recipes-devtools/qemu/qemu.inc +2
-2@@ -71,11 +71,11 @@ do_install_append() { # END of qemu-mips workaround PACKAGECONFIG ??= " \ - fdt sdl kvm \ + fdt gtk+ kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ " PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt kvm virglrenderer glx" # Handle distros such as CentOS 5 32-bit that do not have kvm support PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}"
Re: [PATCH 04/12] qemu: build target variant with gtk+, and nativesdk variant without sdl
Quoted 7 lines · Mark Hatle
Quoted 3 lines
Patch 3 changes things in meta-poky/, and patch 4 changes things in meta/, so they cannot be combined unfortunately. I can however swap their order, so that there is less confusion.
Swap the order and add a copy of the commit message (from 4 to 3) then. That should lesson anyone's questions if they need to figure out why it changed in the future.
Currently the commits are:
commit 341ab87cf326dc1f1d7a3b83d624cde04047f43e
Author: Alexander Kanavin <[email protected]> Date: Thu Dec 27 15:17:26 2018 +0100
local.conf.sample: adjust the qemu config to enable gtk+ instead of sdl
commit 1170d353029dfb3f1a5ed9bab567e353bd034dfa
Author: Alexander Kanavin <[email protected]> Date: Thu Dec 27 15:33:27 2018 +0100
qemu: build target variant with gtk+, and nativesdk variant without sdl
As sdl is deprecated in favor of gtk+, it should not be the default.
I'm confused, what should go where?
Alex
Re: [PATCH 02/12] qemu: enable virglrenderer and glx options for native/nativesdk builds
In reply to Alexander KanavinQuoted 12 lines · Alexander Kanavin
Except for ming32/darwin, which do not support them.
Signed-off-by Alexander Kanavin <[email protected]>--- meta/recipes-devtools/qemu/qemu.inc | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)meta/recipes-devtools/qemu/qemu.inc +0
-0
meta/recipes-devtools/qemu/qemu.inc PACKAGECONFIG ??= " \ · line 78
Quoted 7 lines
meta/recipes-devtools/qemu/qemu.inc +2
-2@@ -74,15 +74,15 @@ PACKAGECONFIG ??= " \ fdt sdl kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ " -PACKAGECONFIG_class-native ??= "fdt alsa kvm" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm" +PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx"
Didn't you want to enable gtk+ here as well?
Quoted 20 lines
meta/recipes-devtools/qemu/qemu.inc +3
-3# Handle distros such as CentOS 5 32-bit that do not have kvm support PACKAGECONFIG_class-native_remove = "${@'kvm' if not os.path.exists('/usr/include/linux/kvm.h') else ''}" -# Disable kvm on targets that do not support it -PACKAGECONFIG_remove_darwin = "kvm" -PACKAGECONFIG_remove_mingw32 = "kvm" +# Disable kvm/virgl/mesa on targets that do not support it +PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+" +PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+" PACKAGECONFIG[sdl] = "--enable-sdl --with-sdlabi=2.0,--disable-sdl,libsdl2" PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr,--disable-virtfs,libcap attr,"Signature · 7 lines
2.17.1 -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
Re: [PATCH 02/12] qemu: enable virglrenderer and glx options for native/nativesdk builds
Quoted 7 lines · Martin Jansa
meta/recipes-devtools/qemu/qemu.inc PACKAGECONFIG ??= " \ · line 78
Quoted 5 lines
"
meta/recipes-devtools/qemu/qemu.inc +2
-2-PACKAGECONFIG_class-native ??= "fdt alsa kvm" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm" +PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx"Didn't you want to enable gtk+ here as well?
Nope; it's enabled in a separate patch in meta-poky/local.conf template, in the same way as sdl is enabled there currently.
On the other hand... maybe we can just simplify it all, and enable gtk directly in the recipe.
Alex
Re: [PATCH 02/12] qemu: enable virglrenderer and glx options for native/nativesdk builds
Quoted 9 lines · Alexander Kanavin
Quoted 7 lines · Martin Jansa
meta/recipes-devtools/qemu/qemu.inc PACKAGECONFIG ??= " \ · line 78
Quoted 5 lines
"
meta/recipes-devtools/qemu/qemu.inc +2
-2-PACKAGECONFIG_class-native ??= "fdt alsa kvm" -PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm" +PACKAGECONFIG_class-native ??= "fdt alsa kvm virglrenderer glx" +PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm virglrenderer glx"Didn't you want to enable gtk+ here as well?
Quoted 5 lines
Nope; it's enabled in a separate patch in
meta-poky/local.conftemplate, in the same way as sdl is enabled there currently.On the other hand... maybe we can just simplify it all, and enable gtk directly in the recipe.
Does enabling virglrenderer and glx do anything useful without any UI? If not then I guess it should be enabled directly here or all 3 enabled only in the poky's local.conf.
I haven't tried egl-headless+spice on this patchset yet, maybe that's the combination I'm looking for.
Regards,
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
Re: [PATCH 01/12] virglrenderer: add a recipe
In reply to Alexander KanavinQuoted 78 lines · Alexander Kanavin
This component enables hardware-accelerated GL inside QEMU guests. For more information, see here:
https://lwn.net/Articles/767970/
https://www.collabora.com/news-and-blog/blog/2018/02/12/virtualizing-gpu-access/
https://www.collabora.com/news-and-blog/blog/2018/05/09/gpu-virtualization-update/Signed-off-by Alexander Kanavin <[email protected]>--- meta/conf/distro/include/maintainers.inc | 1 + .../0001-vtest-add-missing-includes.patch | 38 +++++++++++++++++++ .../virglrenderer/virglrenderer_git.bb | 19 ++++++++++ 3 files changed, 58 insertions(+) create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch create mode 100644 meta/recipes-graphics/virglrenderer/virglrenderer_git.bbmeta/conf/distro/include/maintainers.inc +1
-0@@ -700,6 +700,7 @@ RECIPE_MAINTAINER_pn-util-macros = "Armin Kuster <[email protected]>" RECIPE_MAINTAINER_pn-v86d = "Alexander Kanavin <[email protected]>" RECIPE_MAINTAINER_pn-vala = "Alexander Kanavin <[email protected]>" RECIPE_MAINTAINER_pn-valgrind = "Alexander Kanavin <[email protected]>" +RECIPE_MAINTAINER_pn-virglrenderer = "Alexander Kanavin <[email protected]>" RECIPE_MAINTAINER_pn-volatile-binds = "Chen Qi <[email protected]>" RECIPE_MAINTAINER_pn-vte = "Anuj Mittal <[email protected]>" RECIPE_MAINTAINER_pn-vulkan = "Ross Burton <[email protected]>"meta/recipes-graphics/virglrenderer/virglrenderer/0001-vtest-add-missing-includes.patch new file +38
-0@@ -0,0 +1,38 @@ +From 05c5c5f43fbffb3317bd9da27d414890d2ef493c Mon Sep 17 00:00:00 2001 +From: Alexander Kanavin <[email protected]> +Date: Fri, 18 Jan 2019 13:47:23 +0100 +Subject: [PATCH] vtest: add missing includes + +This fixes build failures with musl C library + +Upstream-Status: Submitted [https://gitlab.freedesktop.org/virgl/virglrenderer/merge_requests/125] +Signed-off-by: Alexander Kanavin <[email protected]> +--- + vtest/util.c | 1 + + vtest/vtest_server.c | 1 + + 2 files changed, 2 insertions(+) + +diff --git a/vtest/util.c b/vtest/util.c +index 0d3c78f..c605253 100644 +--- a/vtest/util.c ++++ b/vtest/util.c +@@ -26,6 +26,7 @@ + #include <stdio.h> + #include <string.h> + #include <unistd.h> ++#include <sys/select.h> + + int vtest_wait_for_fd_read(int fd) + { +diff --git a/vtest/vtest_server.c b/vtest/vtest_server.c +index bc6c95f..010721f 100644 +--- a/vtest/vtest_server.c ++++ b/vtest/vtest_server.c +@@ -31,6 +31,7 @@ + #include <netinet/in.h> + #include <sys/un.h> + #include <fcntl.h> ++#include <string.h> + + #include "util.h" + #include "vtest.h"meta/recipes-graphics/virglrenderer/virglrenderer_git.bb new file +0
-0
meta/recipes-graphics/virglrenderer/virglrenderer_git.bb line 7
Quoted 7 lines
meta/recipes-graphics/virglrenderer/virglrenderer_git.bb new file +7
-0@@ -0,0 +1,19 @@ +SUMMARY = "VirGL virtual OpenGL renderer" +HOMEPAGE = "https://virgil3d.github.io/" + +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING;md5=c81c08eeefd9418fca8f88309a76db10" + +DEPENDS = "libdrm mesa libepoxy"
Does it need to depend on mesa directly instead of one of virtual/* providers?
It fails to build for targets which use different mesa, e.g. mesa-gl:
ERROR: Nothing PROVIDES 'mesa' (but /OE/build/luneos-master/webos-ports/openembedded-core/meta/recipes-graphics/virglrenderer/virglrenderer_git.bb DEPENDS on or otherwise requires it) mesa was skipped: PREFERRED_PROVIDER_virtual/libgl set to mesa-gl, not mesa
ERROR: Required build target 'virglrenderer' has no buildable providers.
Missing or unbuildable dependency chain was: ['virglrenderer', 'mesa']
Regards,
Quoted 20 lines
meta/recipes-graphics/virglrenderer/virglrenderer_git.bb new file +12
-0+PV = "0.7.0" +SRCREV = "402c228861c9893f64cffbbcb4cb23044b8c721c" +SRC_URI = "git://anongit.freedesktop.org/virglrenderer \ + file://0001-vtest-add-missing-includes.patch \ + " + +S = "${WORKDIR}/git" + +inherit autotools pkgconfig + +BBCLASSEXTEND = "native nativesdk" +Signature · 7 lines
2.17.1 -- _______________________________________________ Openembedded-core mailing list [email protected] http://lists.openembedded.org/mailman/listinfo/openembedded-core
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
Re: [PATCH 02/12] qemu: enable virglrenderer and glx options for native/nativesdk builds
In reply to Martin JansaQuoted 3 lines · Martin Jansa
Does enabling virglrenderer and glx do anything useful without any UI? If not then I guess it should be enabled directly here or all 3 enabled only in the poky's local.conf.
Yes, absolutely. You can instruct qemu to render to an off-screen buffer, and access that with vnc, even across the network (and maybe spice will work too, I didn't try :). I explained this in the cover letter...
Alex
Re: [PATCH 01/12] virglrenderer: add a recipe
In reply to Martin JansaQuoted 9 lines · Martin Jansa
Does it need to depend on mesa directly instead of one of virtual/* providers?
It fails to build for targets which use different mesa, e.g. mesa-gl:
ERROR: Nothing PROVIDES 'mesa' (but /OE/build/luneos-master/webos-ports/openembedded-core/meta/recipes-graphics/virglrenderer/virglrenderer_git.bb DEPENDS on or otherwise requires it) mesa was skipped: PREFERRED_PROVIDER_virtual/libgl set to mesa-gl, not mesa
ERROR: Required build target 'virglrenderer' has no buildable providers.
Missing or unbuildable dependency chain was: ['virglrenderer', 'mesa']
Yes, mesa-gl isn't going to work. Virgl needs the following bits (set in mesa recipe):
PACKAGECONFIG_class-native ?= "gbm dri-native egl"
dri-native is same as dri, but without drivers to save build time.
Alex
Re: [PATCH 01/12] virglrenderer: add a recipe
Quoted 11 lines · Alexander Kanavin
Quoted 9 lines · Martin Jansa
Does it need to depend on mesa directly instead of one of virtual/* providers?
It fails to build for targets which use different mesa, e.g. mesa-gl:
ERROR: Nothing PROVIDES 'mesa' (but /OE/build/luneos-master/webos-ports/openembedded-core/meta/recipes-graphics/virglrenderer/virglrenderer_git.bb DEPENDS on or otherwise requires it) mesa was skipped: PREFERRED_PROVIDER_virtual/libgl set to mesa-gl, not mesa
ERROR: Required build target 'virglrenderer' has no buildable providers.
Missing or unbuildable dependency chain was: ['virglrenderer', 'mesa']
Quoted 5 lines
Yes, mesa-gl isn't going to work. Virgl needs the following bits (set in mesa recipe):
PACKAGECONFIG_class-native ?= "gbm dri-native egl"dri-native is same as dri, but without drivers to save build time.
OK, then with mesa used in qemux86* it still fails with:
| Making all in vtest | make[2]: Entering directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o util.o ../../git/vtest/util.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_server.o ../../git/vtest/vtest_server.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_renderer.o ../../git/vtest/vtest_renderer.c | ../i586-webos-linux-libtool --tag=CC --mode=link i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/libvirglrenderer.la | i586-webos-linux-libtool: link: i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/.libs/libvirglrenderer.so -lm -lgbm -lepoxy -pthread | ../src/.libs/libvirglrenderer.so: error: undefined reference to 'drmPrimeHandleToFD' | collect2: error: ld returned 1 exit status | Makefile:429: recipe for target 'virgl_test_server' failed | make[2]: *** [virgl_test_server] Error 1 | make[2]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | Makefile:510: recipe for target 'all-recursive' failed | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build' | Makefile:419: recipe for target 'all' failed | make: *** [all] Error 2 | ERROR: oe_runmake failed
The fix from
http://git.openembedded.org/openembedded-core-contrib/commit/?h=jansa/qemu&id=c29d4ccfe0a5f53c49883e55c2c2bb444997b1cf
is still applicable and fixes this.
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
Re: [PATCH 01/12] virglrenderer: add a recipe
Quoted 3 lines · Martin Jansa
The fix from
http://git.openembedded.org/openembedded-core-contrib/commit/?h=jansa/qemu&id=c29d4ccfe0a5f53c49883e55c2c2bb444997b1cf
is still applicable and fixes this.
Somehow the issue does not show up in plain poky, but the fix seems right. Can you send it upstream via
https://gitlab.freedesktop.org/virgl/virglrenderer/merge_requests
please?
Alex
Re: [PATCH 01/12] virglrenderer: add a recipe
It was sent to upstream (somewhere) by the original author, I haven't found it on gitlab, so I've asked original author in:
https://bugs.gentoo.org/571124#c5
Plain poky probably doesn't use gold, that's why you're not seeing it there.
Quoted 13 lines · Alexander Kanavin
Quoted 2 lines · Martin Jansa
The fix from
Quoted 1 line
is still applicable and fixes this.
Somehow the issue does not show up in plain poky, but the fix seems right. Can you send it upstream via
https://gitlab.freedesktop.org/virgl/virglrenderer/merge_requests
please?Alex
Re: [PATCH 01/12] virglrenderer: add a recipe
Quoted 3 lines · Martin Jansa
It was sent to upstream (somewhere) by the original author, I haven't found it on gitlab, so I've asked original author in:
https://bugs.gentoo.org/571124#c5
Maybe a new merge request is the quickest way to sort this. The patch was probably sent to the virgl mailing list or privately to airlied years ago and fell through.
Alex
Re: [PATCH 01/12] virglrenderer: add a recipe
In reply to Martin Jansadump ld.bfd generated .so and see if this symbol is present
Quoted 50 lines · Martin Jansa
Quoted 11 lines · Alexander Kanavin
Quoted 9 lines · Martin Jansa
Does it need to depend on mesa directly instead of one of virtual/* providers?
It fails to build for targets which use different mesa, e.g. mesa-gl:
ERROR: Nothing PROVIDES 'mesa' (but /OE/build/luneos-master/webos-ports/openembedded-core/meta/recipes-graphics/virglrenderer/virglrenderer_git.bb DEPENDS on or otherwise requires it) mesa was skipped: PREFERRED_PROVIDER_virtual/libgl set to mesa-gl, not mesa
ERROR: Required build target 'virglrenderer' has no buildable providers.
Missing or unbuildable dependency chain was: ['virglrenderer', 'mesa']Quoted 5 lines
Yes, mesa-gl isn't going to work. Virgl needs the following bits (set in mesa recipe):
PACKAGECONFIG_class-native ?= "gbm dri-native egl"dri-native is same as dri, but without drivers to save build time.
OK, then with mesa used in qemux86* it still fails with:
| Making all in vtest | make[2]: Entering directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o util.o ../../git/vtest/util.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_server.o ../../git/vtest/vtest_server.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_renderer.o ../../git/vtest/vtest_renderer.c | ../i586-webos-linux-libtool --tag=CC --mode=link i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/libvirglrenderer.la | i586-webos-linux-libtool: link: i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/.libs/libvirglrenderer.so -lm -lgbm -lepoxy -pthread | ../src/.libs/libvirglrenderer.so: error: undefined reference to 'drmPrimeHandleToFD' | collect2: error: ld returned 1 exit status | Makefile:429: recipe for target 'virgl_test_server' failed | make[2]: *** [virgl_test_server] Error 1 | make[2]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | Makefile:510: recipe for target 'all-recursive' failed | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build' | Makefile:419: recipe for target 'all' failed | make: *** [all] Error 2 | ERROR: oe_runmake failedThe fix from
http://git.openembedded.org/openembedded-core-contrib/commit/?h=jansa/qemu&id=c29d4ccfe0a5f53c49883e55c2c2bb444997b1cf
is still applicable and fixes this.
--
Martin 'JaMa' Jansa jabber: [email protected]
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Re: [PATCH 01/12] virglrenderer: add a recipe
here is a build failure with -fuse-ld=gold
https://errors.yoctoproject.org/Errors/Details/222046/
Quoted 54 lines · Khem Raj
dump ld.bfd generated .so and see if this symbol is present
Quoted 50 lines · Martin Jansa
Quoted 11 lines · Alexander Kanavin
Quoted 9 lines · Martin Jansa
Does it need to depend on mesa directly instead of one of virtual/* providers?
It fails to build for targets which use different mesa, e.g. mesa-gl:
ERROR: Nothing PROVIDES 'mesa' (but /OE/build/luneos-master/webos-ports/openembedded-core/meta/recipes-graphics/virglrenderer/virglrenderer_git.bb DEPENDS on or otherwise requires it) mesa was skipped: PREFERRED_PROVIDER_virtual/libgl set to mesa-gl, not mesa
ERROR: Required build target 'virglrenderer' has no buildable providers.
Missing or unbuildable dependency chain was: ['virglrenderer', 'mesa']Quoted 5 lines
Yes, mesa-gl isn't going to work. Virgl needs the following bits (set in mesa recipe):
PACKAGECONFIG_class-native ?= "gbm dri-native egl"dri-native is same as dri, but without drivers to save build time.
OK, then with mesa used in qemux86* it still fails with:
| Making all in vtest | make[2]: Entering directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o util.o ../../git/vtest/util.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_server.o ../../git/vtest/vtest_server.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_renderer.o ../../git/vtest/vtest_renderer.c | ../i586-webos-linux-libtool --tag=CC --mode=link i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/libvirglrenderer.la | i586-webos-linux-libtool: link: i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/.libs/libvirglrenderer.so -lm -lgbm -lepoxy -pthread | ../src/.libs/libvirglrenderer.so: error: undefined reference to 'drmPrimeHandleToFD' | collect2: error: ld returned 1 exit status | Makefile:429: recipe for target 'virgl_test_server' failed | make[2]: *** [virgl_test_server] Error 1 | make[2]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | Makefile:510: recipe for target 'all-recursive' failed | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build' | Makefile:419: recipe for target 'all' failed | make: *** [all] Error 2 | ERROR: oe_runmake failedThe fix from
http://git.openembedded.org/openembedded-core-contrib/commit/?h=jansa/qemu&id=c29d4ccfe0a5f53c49883e55c2c2bb444997b1cf
is still applicable and fixes this.
--
Martin 'JaMa' Jansa jabber: [email protected]
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core
Re: [PATCH 04/12] qemu: build target variant with gtk+, and nativesdk variant without sdl
In reply to Alexander KanavinQuoted 9 lines · Alexander Kanavin
Quoted 7 lines · Mark Hatle
Quoted 3 lines
Patch 3 changes things in meta-poky/, and patch 4 changes things in meta/, so they cannot be combined unfortunately. I can however swap their order, so that there is less confusion.
Swap the order and add a copy of the commit message (from 4 to 3) then. That should lesson anyone's questions if they need to figure out why it changed in the future.
Quoted 7 lines
Currently the commits are:
commit
341ab87cf326dc1f1d7a3b83d624cde04047f43eAuthor: Alexander Kanavin <[email protected]> Date: Thu Dec 27 15:17:26 2018 +0100local.conf.sample: adjust the qemu config to enable gtk+ instead of sdl
Reading the above, I didn't know why you changed the qemu config to enable gtk+.
The commit below has the magic line:
'As sdl is deprecated in favor of gtk+, it should not be the default.'
Once you add that, it's clear to me why the change was made if I ever look at the local.conf.sample (using git log or git blame).
(Sorry my reply had been delayed, I missed this earlier.)
--Mark
Quoted 16 lines
Signed-off-by Alexander Kanavin <[email protected]>commit
1170d353029dfb3f1a5ed9bab567e353bd034dfaAuthor: Alexander Kanavin <[email protected]> Date: Thu Dec 27 15:33:27 2018 +0100qemu: build target variant with gtk+, and nativesdk variant without sdl
As sdl is deprecated in favor of gtk+, it should not be the default.
Signed-off-by Alexander Kanavin <[email protected]>I'm confused, what should go where?
Alex
Re: [PATCH 04/12] qemu: build target variant with gtk+, and nativesdk variant without sdl
Quoted 10 lines · Mark Hatle
Reading the above, I didn't know why you changed the qemu config to enable gtk+.
The commit below has the magic line:
'As sdl is deprecated in favor of gtk+, it should not be the default.'
Once you add that, it's clear to me why the change was made if I ever look at the local.conf.sample (using git log or git blame).
(Sorry my reply had been delayed, I missed this earlier.)
Thanks, I fixed this now.
Alex
Re: [PATCH 01/12] virglrenderer: add a recipe
In reply to Khem RajAnyway, I sent it upstream:
https://gitlab.freedesktop.org/virgl/virglrenderer/merge_requests/153
and added to my branch on poky-contrib.
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=akanavin/virgl-gtk
Alex
Quoted 60 lines · Khem Raj
here is a build failure with -fuse-ld=gold
https://errors.yoctoproject.org/Errors/Details/222046/
Quoted 54 lines · Khem Raj
dump ld.bfd generated .so and see if this symbol is present
Quoted 50 lines · Martin Jansa
Quoted 11 lines · Alexander Kanavin
Quoted 9 lines · Martin Jansa
Does it need to depend on mesa directly instead of one of virtual/* providers?
It fails to build for targets which use different mesa, e.g. mesa-gl:
ERROR: Nothing PROVIDES 'mesa' (but /OE/build/luneos-master/webos-ports/openembedded-core/meta/recipes-graphics/virglrenderer/virglrenderer_git.bb DEPENDS on or otherwise requires it) mesa was skipped: PREFERRED_PROVIDER_virtual/libgl set to mesa-gl, not mesa
ERROR: Required build target 'virglrenderer' has no buildable providers.
Missing or unbuildable dependency chain was: ['virglrenderer', 'mesa']Quoted 5 lines
Yes, mesa-gl isn't going to work. Virgl needs the following bits (set in mesa recipe):
PACKAGECONFIG_class-native ?= "gbm dri-native egl"dri-native is same as dri, but without drivers to save build time.
OK, then with mesa used in qemux86* it still fails with:
| Making all in vtest | make[2]: Entering directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o util.o ../../git/vtest/util.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_server.o ../../git/vtest/vtest_server.c | i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -DHAVE_CONFIG_H -I. -I../../git/vtest -I.. -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -c -o vtest_renderer.o ../../git/vtest/vtest_renderer.c | ../i586-webos-linux-libtool --tag=CC --mode=link i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/libvirglrenderer.la | i586-webos-linux-libtool: link: i586-webos-linux-gcc -m32 -march=i586 --sysroot=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot -I../../git/src/gallium/drivers/virgl -I../../git/src/gallium/include -I../../git/src/gallium/auxiliary -I../../git/src/gallium/drivers -I../../git/include -I../../git/src -I/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot/usr/include/libdrm -DMESA_EGL_NO_X11_HEADERS -O -fno-omit-frame-pointer -g -feliminate-unused-debug-types -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0=/usr/src/debug/virglrenderer/0.7.0-r0 -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot= -fdebug-prefix-map=/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/recipe-sysroot-native= -pipe -Wall -Wextra -Werror=implicit-function-declaration -Werror=missing-prototypes -Wmissing-prototypes -Werror=int-to-pointer-cast -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o .libs/virgl_test_server util.o vtest_server.o vtest_renderer.o ../src/.libs/libvirglrenderer.so -lm -lgbm -lepoxy -pthread | ../src/.libs/libvirglrenderer.so: error: undefined reference to 'drmPrimeHandleToFD' | collect2: error: ld returned 1 exit status | Makefile:429: recipe for target 'virgl_test_server' failed | make[2]: *** [virgl_test_server] Error 1 | make[2]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build/vtest' | Makefile:510: recipe for target 'all-recursive' failed | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory '/OE/build/luneos-master/webos-ports/tmp-glibc/work/i586-webos-linux/virglrenderer/0.7.0-r0/build' | Makefile:419: recipe for target 'all' failed | make: *** [all] Error 2 | ERROR: oe_runmake failedThe fix from
http://git.openembedded.org/openembedded-core-contrib/commit/?h=jansa/qemu&id=c29d4ccfe0a5f53c49883e55c2c2bb444997b1cf
is still applicable and fixes this.
--
Martin 'JaMa' Jansa jabber: [email protected]
--
_______________________________________________
Openembedded-core mailing list
[email protected]
http://lists.openembedded.org/mailman/listinfo/openembedded-core