Skip to contentSkip to conversation

alsa recipe updates

PATCH Superseded Tanu Kaskinen 3 participants 7 messages Feb 21, 2019 – Feb 22, 2019

lore
Share & tools
lore
#0 lore raw

v2 cover alsa recipe updates

The following changes since commit ff2c029b568f70aa9960dde04ddd207829812ea0:

resulttool: Improvements to allow integration to the autobuilder (2019-02-21 12:31:50 +0000)

are available in the Git repository at:

git://git.openembedded.org/openembedded-core-contrib tanuk/updates
http://cgit.openembedded.org/openembedded-core-contrib/log/?h=tanuk/updates

The alsa-tools update is missing, because the recipe upgrade deadline is near and the changes in alsa-tools look like a potential rabbit hole. I'll send the alsa-tools update separately when it's ready. The main change in alsa-tools is that the hwmixvolume program got ported from PyGTK to gobject-introspection, and from GTK2 to GTK3. I doubt anyone actually is using that program, it's not even built by default.

Changes in v2:
- More reliable SRC_URIs.

Tanu Kaskinen (3):
alsa-lib: 1.1.6 -> 1.1.8
alsa-plugins: 1.1.6 -> 1.1.8
alsa-utils: 1.1.6 -> 1.1.8

 .../{alsa-lib_1.1.6.bb => alsa-lib_1.1.8.bb}  |  6 +-
 ...plugins_1.1.6.bb => alsa-plugins_1.1.8.bb} | 86 +++++++++++++++++--
 ...s_1.1.6.bb => alsa-utils-scripts_1.1.8.bb} |  0
 ...lsa-utils_1.1.6.bb => alsa-utils_1.1.8.bb} | 14 ++-
 .../recipes-multimedia/ffmpeg/ffmpeg_4.1.1.bb |  2 +-
 5 files changed, 88 insertions(+), 20 deletions(-)
 rename meta/recipes-multimedia/alsa/{alsa-lib_1.1.6.bb => alsa-lib_1.1.8.bb} (83%)
 rename meta/recipes-multimedia/alsa/{alsa-plugins_1.1.6.bb => alsa-plugins_1.1.8.bb} (50%)
 rename meta/recipes-multimedia/alsa/{alsa-utils-scripts_1.1.6.bb => alsa-utils-scripts_1.1.8.bb} (100%)
 rename meta/recipes-multimedia/alsa/{alsa-utils_1.1.6.bb => alsa-utils_1.1.8.bb} (90%)
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 1/3 alsa-lib: 1.1.6 -> 1.1.8

Changelogs:
http://alsa-project.org/main/index.php/Changes_v1.1.6_v1.1.7
http://alsa-project.org/main/index.php/Changes_v1.1.7_v1.1.8

One significant change was that the search path of add-on configuration files was changed from /usr/share/alsa/alsa.conf.d to /etc/alsa/conf.d. Packages that install such files should still use the /usr/share location, though. Symlinks need to be created from /etc to /usr/share. The rationale for using /etc is that the system administrator can better control the configuration that way, and the rationale for installing files under /usr/share is that configuration snippets that are installed by packages are not meant to be directly edited by the administrator.

alsa-plugins had to be modified to add symlinks for the configuration snippets that it installs. I also added FILES_${PN} = "", because the alsa-plugins package is supposed to be empty, but also because for some reason that I don't understand the symlinks would otherwise go to the alsa-plugins package rather than alsa-plugins-pulseaudio-conf.

SRC_URI was changed to a more reliable source (at least currently the ftp server is flaky).

---
 .../alsa/{alsa-lib_1.1.6.bb => alsa-lib_1.1.8.bb}   |  6 +++---
 meta/recipes-multimedia/alsa/alsa-plugins_1.1.6.bb  | 13 ++++++++++++-
 2 files changed, 15 insertions(+), 4 deletions(-)
 rename meta/recipes-multimedia/alsa/{alsa-lib_1.1.6.bb => alsa-lib_1.1.8.bb} (83%)
meta/recipes-multimedia/alsa/alsa-lib_1.1.8.bb renamed from meta/recipes-multimedia/alsa/alsa-lib_1.1.6.bb +3 -3
similarity index 83%
rename from meta/recipes-multimedia/alsa/alsa-lib_1.1.6.bb
rename to meta/recipes-multimedia/alsa/alsa-lib_1.1.8.bb
index 25e7a3c6b7..76cc9627e5 100644
@@ -7,9 +7,9 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=a916467b91076e631dd8edb7424769c7 \
                     file://src/socket.c;md5=dd1bc7f44872690224d89c1a9806e495;beginline=1;endline=26 \
                     "
 
-SRC_URI = "ftp://ftp.alsa-project.org/pub/lib/${BP}.tar.bz2"
-SRC_URI[md5sum] = "2f981a8f7897c59ec2ddc44916d33788"
-SRC_URI[sha256sum] = "5f2cd274b272cae0d0d111e8a9e363f08783329157e8dd68b3de0c096de6d724"
+SRC_URI = "https://www.alsa-project.org/files/pub/lib/${BP}.tar.bz2"
+SRC_URI[md5sum] = "0eec0d657a07927795809c8f87fb76ca"
+SRC_URI[sha256sum] = "3cdc3a93a6427a26d8efab4ada2152e64dd89140d981f6ffa003e85be707aedf"
 
 inherit autotools pkgconfig
 
meta/recipes-multimedia/alsa/alsa-plugins_1.1.6.bb +12 -1
index 7ede8be98a..ee06191ea9 100644
@@ -47,14 +47,23 @@ PACKAGES_DYNAMIC = "^libasound-module-.*"
 
 # The alsa-plugins package doesn't itself contain anything, it just depends on
 # all built plugins.
+FILES_${PN} = ""
 ALLOW_EMPTY_${PN} = "1"
 
 do_install_append() {
 	rm ${D}${libdir}/alsa-lib/*.la
 
-	# We use the example as is, so just drop the .example suffix.
 	if [ "${@bb.utils.contains('PACKAGECONFIG', 'pulseaudio', 'yes', 'no', d)}" = "yes" ]; then
+		# We use the example as is, so just drop the .example suffix.
 		mv ${D}${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf.example ${D}${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf
+
+		# The conf.d files are installed in datadir, but alsa-lib
+		# searches for conf.d files only in sysconfdir. Distributions
+		# are expected to create symlinks in sysconfdir, so that's what
+		# we do here.
+		mkdir -p ${D}${sysconfdir}/alsa/conf.d
+		ln -s ${datadir}/alsa/alsa.conf.d/50-pulseaudio.conf ${D}${sysconfdir}/alsa/conf.d/50-pulseaudio.conf
+		ln -s ${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf ${D}${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf
 	fi
 }
 
@@ -94,6 +103,8 @@ INSANE_SKIP_${MLPREFIX}libasound-module-rate-speexrate = "dev-so"
 FILES_${PN}-pulseaudio-conf += "\
         ${datadir}/alsa/alsa.conf.d/50-pulseaudio.conf \
         ${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf \
+        ${sysconfdir}/alsa/conf.d/50-pulseaudio.conf \
+        ${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf \
 "
 
 RDEPENDS_${PN}-pulseaudio-conf += "\
Signature · 1 line
2.20.1
#2 lore raw

PATCH v2 2/3 alsa-plugins: 1.1.6 -> 1.1.8

In reply to Tanu Kaskinen

Changelogs:
http://alsa-project.org/main/index.php/Changes_v1.1.6_v1.1.7
http://alsa-project.org/main/index.php/Changes_v1.1.7_v1.1.8

The --enable-avcodec configure option was renamed to --enable-libav, and I renamed the respective packageconfig item too.

There's a new pcm plugin: aaf (AVTP Audio Format). I added a packageconfig item for it, but I didn't test it, because libavtp doesn't seem to be currently packaged for OpenEmbedded.

There are now configuration files for most of the plugins. I removed the symlink creation for 50-pulseaudio.conf, because upstream now creates the symlinks for us. 99-pulseaudio-default.conf is an exception, because upstream ships it only as an example, and upstream doesn't install a symlink for it (upstream actually installs it directly under /etc, but I moved it back to /usr/share), so for that file we still have to create the symlink ourselves.

The lavcrate plugin was converted to use libavresample (and renamed to lavrate). Libavresample is provided by ffmpeg, but ffmpeg was by default built with libavresample disabled. This patch now enables libavresample by default in the ffmpeg recipe in order to not cause a regression in alsa-plugins.

SRC_URI was changed to a more reliable source (at least currently the ftp server is flaky).

---
 ...plugins_1.1.6.bb => alsa-plugins_1.1.8.bb} | 89 +++++++++++++++----
 .../recipes-multimedia/ffmpeg/ffmpeg_4.1.1.bb |  2 +-
 2 files changed, 75 insertions(+), 16 deletions(-)
 rename meta/recipes-multimedia/alsa/{alsa-plugins_1.1.6.bb => alsa-plugins_1.1.8.bb} (53%)
meta/recipes-multimedia/alsa/alsa-plugins_1.1.8.bb renamed from meta/recipes-multimedia/alsa/alsa-plugins_1.1.6.bb +74 -15
similarity index 53%
rename from meta/recipes-multimedia/alsa/alsa-plugins_1.1.6.bb
rename to meta/recipes-multimedia/alsa/alsa-plugins_1.1.8.bb
index ee06191ea9..2d9cc06f58 100644
@@ -20,9 +20,9 @@ LIC_FILES_CHKSUM = "\
         file://rate/rate_samplerate.c;endline=35;md5=fd77bce85f4a338c0e8ab18430b69fae \
 "
 
-SRC_URI = "ftp://ftp.alsa-project.org/pub/plugins/${BP}.tar.bz2"
-SRC_URI[md5sum] = "8387279e99feeb2ecffaac5f293223d7"
-SRC_URI[sha256sum] = "6f1d31ebe3b1fa1cc8dade60b7bed1cb2583ac998167002d350dc0a5e3e40c13"
+SRC_URI = "https://www.alsa-project.org/files/pub/plugins/${BP}.tar.bz2"
+SRC_URI[md5sum] = "d0f87211d1560f2c07c8eae4297bc4f6"
+SRC_URI[sha256sum] = "7f77df171685ccec918268477623a39db4d9f32d5dc5e76874ef2467a2405994"
 
 DEPENDS += "alsa-lib"
 
@@ -33,8 +33,9 @@ PACKAGECONFIG ??= "\
         speexdsp \
         ${@bb.utils.filter('DISTRO_FEATURES', 'pulseaudio', d)} \
 "
-PACKAGECONFIG[avcodec] = "--enable-avcodec,--disable-avcodec,libav"
+PACKAGECONFIG[aaf] = "--enable-aaf,--disable-aaf,avtp"
 PACKAGECONFIG[jack] = "--enable-jack,--disable-jack,jack"
+PACKAGECONFIG[libav] = "--enable-libav,--disable-libav,libav"
 PACKAGECONFIG[maemo-plugin] = "--enable-maemo-plugin,--disable-maemo-plugin"
 PACKAGECONFIG[maemo-resource-manager] = "--enable-maemo-resource-manager,--disable-maemo-resource-manager,dbus"
 PACKAGECONFIG[pulseaudio] = "--enable-pulseaudio,--disable-pulseaudio,pulseaudio"
@@ -54,15 +55,11 @@ do_install_append() {
 	rm ${D}${libdir}/alsa-lib/*.la
 
 	if [ "${@bb.utils.contains('PACKAGECONFIG', 'pulseaudio', 'yes', 'no', d)}" = "yes" ]; then
-		# We use the example as is, so just drop the .example suffix.
-		mv ${D}${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf.example ${D}${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf
-
-		# The conf.d files are installed in datadir, but alsa-lib
-		# searches for conf.d files only in sysconfdir. Distributions
-		# are expected to create symlinks in sysconfdir, so that's what
-		# we do here.
-		mkdir -p ${D}${sysconfdir}/alsa/conf.d
-		ln -s ${datadir}/alsa/alsa.conf.d/50-pulseaudio.conf ${D}${sysconfdir}/alsa/conf.d/50-pulseaudio.conf
+		# We use the example as is. Upstream installs the file under
+		# /etc, but we move it under /usr/share and add a symlink under
+		# /etc to be consistent with other installed configuration
+		# files.
+		mv ${D}${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf.example ${D}${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf
 		ln -s ${datadir}/alsa/alsa.conf.d/99-pulseaudio-default.conf ${D}${sysconfdir}/alsa/conf.d/99-pulseaudio-default.conf
 	fi
 }
@@ -73,6 +70,68 @@ python populate_packages_prepend() {
     d.setVar("RDEPENDS_alsa-plugins", packages)
 }
 
+# Many plugins have a configuration file (plus a symlink in /etc) associated
+# with them. We put the plugin and it's configuration usually in the same
+# package, but that's problematic when the configuration file is related to
+# multiple plugins, as is the case with the pulse, oss and maemo plugins. In
+# case of the pulse plugins, we have a separate alsa-plugins-pulseaudio-conf
+# package that depends on all the pulse plugins, which ensures that all plugins
+# that the configuration references are installed. The oss and maemo
+# configuration files, on the other hand, are in the respective pcm plugin
+# packages. Therefore it's possible to install the configuration file without
+# the ctl plugin that the configuration file references. This is unlikely to
+# cause big problems, but some kind of improvement to the packaging could
+# probably be done here (at least it would be good to handle the different
+# plugins in a consistent way).
+FILES_${MLPREFIX}libasound-module-ctl-arcam-av += "\
+        ${datadir}/alsa/alsa.conf.d/50-arcam-av-ctl.conf \
+        ${sysconfdir}/alsa/conf.d/50-arcam-av-ctl.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-a52 += "\
+        ${datadir}/alsa/alsa.conf.d/60-a52-encoder.conf \
+        ${sysconfdir}/alsa/conf.d/60-a52-encoder.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-alsa-dsp += "\
+        ${datadir}/alsa/alsa.conf.d/98-maemo.conf \
+        ${sysconfdir}/alsa/conf.d/98-maemo.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-jack += "\
+        ${datadir}/alsa/alsa.conf.d/50-jack.conf \
+        ${sysconfdir}/alsa/conf.d/50-jack.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-oss += "\
+        ${datadir}/alsa/alsa.conf.d/50-oss.conf \
+        ${sysconfdir}/alsa/conf.d/50-oss.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-speex += "\
+        ${datadir}/alsa/alsa.conf.d/60-speex.conf \
+        ${sysconfdir}/alsa/conf.d/60-speex.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-upmix += "\
+        ${datadir}/alsa/alsa.conf.d/60-upmix.conf \
+        ${sysconfdir}/alsa/conf.d/60-upmix.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-usb-stream += "\
+        ${datadir}/alsa/alsa.conf.d/98-usb-stream.conf \
+        ${sysconfdir}/alsa/conf.d/98-usb-stream.conf \
+"
+FILES_${MLPREFIX}libasound-module-pcm-vdownmix += "\
+        ${datadir}/alsa/alsa.conf.d/60-vdownmix.conf \
+        ${sysconfdir}/alsa/conf.d/60-vdownmix.conf \
+"
+FILES_${MLPREFIX}libasound-module-rate-lavrate += "\
+        ${datadir}/alsa/alsa.conf.d/10-rate-lav.conf \
+        ${sysconfdir}/alsa/conf.d/10-rate-lav.conf \
+"
+FILES_${MLPREFIX}libasound-module-rate-samplerate += "\
+        ${datadir}/alsa/alsa.conf.d/10-samplerate.conf \
+        ${sysconfdir}/alsa/conf.d/10-samplerate.conf \
+"
+FILES_${MLPREFIX}libasound-module-rate-speexrate += "\
+        ${datadir}/alsa/alsa.conf.d/10-speexrate.conf \
+        ${sysconfdir}/alsa/conf.d/10-speexrate.conf \
+"
+
 # The rate plugins create some symlinks. For example, the samplerate plugin
 # creates these links to the main plugin file:
 #
@@ -89,10 +148,10 @@ python populate_packages_prepend() {
 # The symlinks cause QA errors, because usually it's a bug if a non
 # -dev/-dbg/-nativesdk package contains links to .so files, but in this case
 # the errors are false positives, so we disable the QA checks.
-FILES_${MLPREFIX}libasound-module-rate-lavcrate += "${libdir}/alsa-lib/*rate_lavcrate_*.so"
+FILES_${MLPREFIX}libasound-module-rate-lavrate += "${libdir}/alsa-lib/*rate_lavrate_*.so"
 FILES_${MLPREFIX}libasound-module-rate-samplerate += "${libdir}/alsa-lib/*rate_samplerate_*.so"
 FILES_${MLPREFIX}libasound-module-rate-speexrate += "${libdir}/alsa-lib/*rate_speexrate_*.so"
-INSANE_SKIP_${MLPREFIX}libasound-module-rate-lavcrate = "dev-so"
+INSANE_SKIP_${MLPREFIX}libasound-module-rate-lavrate = "dev-so"
 INSANE_SKIP_${MLPREFIX}libasound-module-rate-samplerate = "dev-so"
 INSANE_SKIP_${MLPREFIX}libasound-module-rate-speexrate = "dev-so"
 
meta/recipes-multimedia/ffmpeg/ffmpeg_4.1.1.bb +1 -1
index 0506e11c4b..749b3d0dd8 100644
@@ -42,7 +42,7 @@ DEPENDS = "alsa-lib zlib libogg nasm-native"
 
 inherit autotools pkgconfig
 
-PACKAGECONFIG ??= "avdevice avfilter avcodec avformat swresample swscale postproc \
+PACKAGECONFIG ??= "avdevice avfilter avcodec avformat swresample swscale postproc avresample \
                    bzlib gpl lzma theora x264 \
                    ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'xv', '', d)}"
 
Signature · 1 line
2.20.1
#3 lore raw

PATCH v2 3/3 alsa-utils: 1.1.6 -> 1.1.8

In reply to Tanu Kaskinen

Changelogs:
http://alsa-project.org/main/index.php/Changes_v1.1.6_v1.1.7
http://alsa-project.org/main/index.php/Changes_v1.1.7_v1.1.8

There's a new program, axfer, which is a reimplementation of aplay (and arecord). The purpose of the rewrite is to have code that is easier to maintain. For now both implementations exist, and I decided to put both in the aplay package.

The new 89-alsa-ucm.rules udev file initializes the mixer settings for certain hardware. It's needed for making the hardware usable at boot, in case there's no higher level software (such as PulseAudio) managing the mixer settings. Shipping hardware specific configuration in alsa-utils seems wrong, but I don't know what else to do. I added it to the alsaucm package, because it's kind of tied to the alsaucm utility (the udev rules execute the alsaucm program, and the build system installs the rules file only when alsaucm is enabled). Ideally the UCM configuration in alsa-lib would define the default UCM verb for each hardware, then the udev rules file could just enable the default verb, and there would be no hardware specific configuration in alsa-utils. But that requires upstream development effort.

SRC_URI was changed to a more reliable source (at least currently the ftp server is flaky).

---
 ...cripts_1.1.6.bb => alsa-utils-scripts_1.1.8.bb} |  0
 .../{alsa-utils_1.1.6.bb => alsa-utils_1.1.8.bb}   | 14 ++++++--------
 2 files changed, 6 insertions(+), 8 deletions(-)
 rename meta/recipes-multimedia/alsa/{alsa-utils-scripts_1.1.6.bb => alsa-utils-scripts_1.1.8.bb} (100%)
 rename meta/recipes-multimedia/alsa/{alsa-utils_1.1.6.bb => alsa-utils_1.1.8.bb} (90%)
meta/recipes-multimedia/alsa/alsa-utils-scripts_1.1.8.bb renamed from meta/recipes-multimedia/alsa/alsa-utils-scripts_1.1.6.bb +0 -0
similarity index 100%
rename from meta/recipes-multimedia/alsa/alsa-utils-scripts_1.1.6.bb
rename to meta/recipes-multimedia/alsa/alsa-utils-scripts_1.1.8.bb
meta/recipes-multimedia/alsa/alsa-utils_1.1.8.bb renamed from meta/recipes-multimedia/alsa/alsa-utils_1.1.6.bb +6 -8
similarity index 90%
rename from meta/recipes-multimedia/alsa/alsa-utils_1.1.6.bb
rename to meta/recipes-multimedia/alsa/alsa-utils_1.1.8.bb
index b8ba0cb22a..1e21022e95 100644
@@ -19,11 +19,9 @@ PACKAGECONFIG[bat] = "--enable-bat,--disable-bat,fftwf"
 PACKAGECONFIG[udev] = "--with-udev-rules-dir=`pkg-config --variable=udevdir udev`/rules.d,--with-udev-rules-dir=/unwanted/rules.d,udev"
 PACKAGECONFIG[manpages] = "--enable-xmlto, --disable-xmlto, xmlto-native docbook-xml-dtd4-native docbook-xsl-stylesheets-native"
 
-SRC_URI = "ftp://ftp.alsa-project.org/pub/utils/alsa-utils-${PV}.tar.bz2 \
-          "
-
-SRC_URI[md5sum] = "50ae75567459646b843bed78d916b002"
-SRC_URI[sha256sum] = "155caecc40b2220f686f34ba3655a53e3bdbc0586adb1056733949feaaf7d36e"
+SRC_URI = "https://www.alsa-project.org/files/pub/utils/${BP}.tar.bz2"
+SRC_URI[md5sum] = "54d6f9b483144823d0fc0c26e8cea028"
+SRC_URI[sha256sum] = "fd9bf528922b3829a91913b89a1858c58a0b24271a7b5f529923aa9ea12fa4cf"
 
 # On build machines with python-docutils (not python3-docutils !!) installed
 # rst2man (not rst2man.py) is detected and compile fails with
@@ -59,7 +57,7 @@ RDEPENDS_${PN} += "${ALSA_UTILS_PKGS}"
 FILES_${PN} = ""
 FILES_alsa-utils-alsabat     = "${bindir}/alsabat"
 FILES_alsa-utils-alsatplg    = "${bindir}/alsatplg"
-FILES_alsa-utils-aplay       = "${bindir}/aplay ${bindir}/arecord"
+FILES_alsa-utils-aplay       = "${bindir}/aplay ${bindir}/arecord ${bindir}/axfer"
 FILES_alsa-utils-amixer      = "${bindir}/amixer"
 FILES_alsa-utils-alsamixer   = "${bindir}/alsamixer"
 FILES_alsa-utils-speakertest = "${bindir}/speaker-test ${datadir}/sounds/alsa/ ${datadir}/alsa/speaker-test/"
@@ -67,10 +65,10 @@ FILES_alsa-utils-midi        = "${bindir}/aplaymidi ${bindir}/arecordmidi ${bind
 FILES_alsa-utils-aconnect    = "${bindir}/aconnect"
 FILES_alsa-utils-aseqnet     = "${bindir}/aseqnet"
 FILES_alsa-utils-iecset      = "${bindir}/iecset"
-FILES_alsa-utils-alsactl     = "${sbindir}/alsactl */udev/rules.d */*/udev/rules.d ${systemd_unitdir} ${localstatedir}/lib/alsa ${datadir}/alsa/init/"
+FILES_alsa-utils-alsactl     = "${sbindir}/alsactl */udev/rules.d/90-alsa-restore.rules */*/udev/rules.d/90-alsa-restore.rules ${systemd_unitdir} ${localstatedir}/lib/alsa ${datadir}/alsa/init/"
 FILES_alsa-utils-aseqdump    = "${bindir}/aseqdump"
 FILES_alsa-utils-alsaloop    = "${bindir}/alsaloop"
-FILES_alsa-utils-alsaucm     = "${bindir}/alsaucm"
+FILES_alsa-utils-alsaucm     = "${bindir}/alsaucm */udev/rules.d/89-alsa-ucm.rules */*/udev/rules.d/89-alsa-ucm.rules"
 
 SUMMARY_alsa-utils-alsabat      = "Command-line sound tester for ALSA sound card driver"
 SUMMARY_alsa-utils-alsatplg     = "Converts topology text files into binary format for kernel"
Signature · 1 line
2.20.1
#5 lore raw
In reply to Tanu Kaskinen
Quoted 9 lines · Tanu Kaskinen

Changes in v2:
- More reliable SRC_URIs.

Tanu Kaskinen (3):
alsa-lib: 1.1.6 -> 1.1.8
alsa-plugins: 1.1.6 -> 1.1.8
alsa-utils: 1.1.6 -> 1.1.8

Quoted 5 lines
 .../{alsa-lib_1.1.6.bb => alsa-lib_1.1.8.bb}  |  6 +-
 ...plugins_1.1.6.bb => alsa-plugins_1.1.8.bb} | 86 +++++++++++++++++--
 ...s_1.1.6.bb => alsa-utils-scripts_1.1.8.bb} |  0
 ...lsa-utils_1.1.6.bb => alsa-utils_1.1.8.bb} | 14 ++-
 .../recipes-multimedia/ffmpeg/ffmpeg_4.1.1.bb |  2 +-

I guess alsa-tools should also get an updated SRC_URI, even without a version upgrade for now?

Alex

#4 lore raw

Re: [PATCH v2 3/3] alsa-utils: 1.1.6 -> 1.1.8

In reply to Tanu Kaskinen
Quoted 16 lines · Tanu Kaskinen

SRC_URI was changed to a more reliable source (at least currently the ftp server is flaky).

[...]

-SRC_URI = " ftp://ftp.alsa-project.org/pub/utils/alsa-utils-${PV}.tar.bz2 \

meta/recipes-multimedia/alsa/alsa-utils_1.1.8.bb renamed from meta/recipes-multimedia/alsa/alsa-utils_1.1.6.bb +0 -4
-          "
-
-SRC_URI[md5sum] = "50ae75567459646b843bed78d916b002"
-SRC_URI[sha256sum] =

"155caecc40b2220f686f34ba3655a53e3bdbc0586adb1056733949feaaf7d36e" +SRC_URI = "
https://www.alsa-project.org/files/pub/utils/${BP}.tar.bz2"

(quoted diff) +2 -0
+SRC_URI[md5sum] = "54d6f9b483144823d0fc0c26e8cea028"
+SRC_URI[sha256sum] =
Quoted 1 line

"fd9bf528922b3829a91913b89a1858c58a0b24271a7b5f529923aa9ea12fa4cf"

Thanks for the upgrades, its much appreciated!

I have a small fixup queued in master-next for this, the SRC_URI uses alsa-utils-${PV} because of the alsa-utils-scripts recipe. I'll squash that in when merging if that is ok.

Cheers,

Richard

#6 lore raw
In reply to Alexander Kanavin
Quoted 10 lines · Alexander Kanavin
Quoted 9 lines · Tanu Kaskinen

Changes in v2:
- More reliable SRC_URIs.

Tanu Kaskinen (3):
alsa-lib: 1.1.6 -> 1.1.8
alsa-plugins: 1.1.6 -> 1.1.8
alsa-utils: 1.1.6 -> 1.1.8

Quoted 8 lines
Quoted 5 lines
 .../{alsa-lib_1.1.6.bb => alsa-lib_1.1.8.bb}  |  6 +-
 ...plugins_1.1.6.bb => alsa-plugins_1.1.8.bb} | 86 +++++++++++++++++--
 ...s_1.1.6.bb => alsa-utils-scripts_1.1.8.bb} |  0
 ...lsa-utils_1.1.6.bb => alsa-utils_1.1.8.bb} | 14 ++-
 .../recipes-multimedia/ffmpeg/ffmpeg_4.1.1.bb |  2 +-

I guess alsa-tools should also get an updated SRC_URI, even without a version upgrade for now?

Yes, you're right. I didn't get your point the first time you requested this, sorry...

Signature · 4 lines
Tanu

https://www.patreon.com/tanuk
https://liberapay.com/tanuk