Skip to contentSkip to conversation

hwmon: (k8temp) update to use new hwmon registration API

PATCH Applied Robert Karszniewicz 2 participants 6 messages Jul 20, 2019 – Jul 21, 2019

Subsystems (3)
Documentation Hardware monitoring K8TEMP hardware monitoring driver
lore
Share & tools
lore

Robert Karszniewicz

author
#0 lore raw

cover hwmon: (k8temp) update to use new hwmon registration API

Compiled and ran against 5.2.0-next-20190718.

I did not know how to manipulate type, attr, and channel arguments to is_visible() and read(), so I did not test that. But it works in normal use (sensors and reading the sysfs files directly).

Robert Karszniewicz (2):
hwmon: (k8temp) update to use new hwmon registration API
hwmon: (k8temp) documentation: update URL of datasheet

 Documentation/hwmon/k8temp.rst |   2 +-
 drivers/hwmon/k8temp.c         | 204 +++++++++++++++------------------
 2 files changed, 93 insertions(+), 113 deletions(-)
Signature · 1 line
2.22.0
author
#1 lore raw

PATCH 1/2 hwmon: (k8temp) update to use new hwmon registration API

Also removes hwmon_dev from k8temp_data struct, as that is now passed to callbacks, anyway.

Also reduces binary size:

   text    data     bss     dec     hex filename
   4185    1384       0    5569    15c1 drivers/hwmon/k8temp.ko.bak
   3877    1120       0    4997    1385 drivers/hwmon/k8temp.ko
Signed-off-by Robert Karszniewicz <[email protected]>
---
 drivers/hwmon/k8temp.c | 204 +++++++++++++++++++----------------------
 1 file changed, 92 insertions(+), 112 deletions(-)
drivers/hwmon/k8temp.c +92 -112
index 4994c90c8929..2e8fa1e07398 100644
@@ -13,7 +13,6 @@
 #include <linux/jiffies.h>
 #include <linux/pci.h>
 #include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <asm/processor.h>

@@ -24,7 +23,6 @@
 #define SEL_CORE	0x04
 
 struct k8temp_data {
-	struct device *hwmon_dev;
 	struct mutex update_lock;
 	const char *name;
 	char valid;		/* zero until following fields are valid */

@@ -40,7 +38,7 @@ struct k8temp_data {
 static struct k8temp_data *k8temp_update_device(struct device *dev)
 {
 	struct k8temp_data *data = dev_get_drvdata(dev);
-	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pci_dev *pdev = to_pci_dev(dev->parent);
 	u8 tmp;
 
 	mutex_lock(&data->update_lock);

@@ -82,50 +80,10 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
 	return data;
 }
 
-/*
- * Sysfs stuff
- */
-
-static ssize_t name_show(struct device *dev, struct device_attribute
-			 *devattr, char *buf)
-{
-	struct k8temp_data *data = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%s\n", data->name);
-}
-
-
-static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct sensor_device_attribute_2 *attr =
-	    to_sensor_dev_attr_2(devattr);
-	int core = attr->nr;
-	int place = attr->index;
-	int temp;
-	struct k8temp_data *data = k8temp_update_device(dev);
-
-	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
-		core = core ? 0 : 1;
-
-	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
-
-	return sprintf(buf, "%d\n", temp);
-}
-
-/* core, place */
-
-static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 0, 1);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 1, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 1, 1);
-static DEVICE_ATTR_RO(name);
-
 static const struct pci_device_id k8temp_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
 	{ 0 },
 };
-
 MODULE_DEVICE_TABLE(pci, k8temp_ids);
 
 static int is_rev_g_desktop(u8 model)

@@ -159,14 +117,97 @@ static int is_rev_g_desktop(u8 model)
 	return 1;
 }
 
+static umode_t
+k8temp_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+		  u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	if (attr != hwmon_temp_input)
+		return 0;
+
+	return 0444;
+}
+
+static int
+k8temp_read(struct device *dev, enum hwmon_sensor_types type,
+	    u32 attr, int channel, long *val)
+{
+	struct k8temp_data *data = k8temp_update_device(dev);
+	int core, place;
+
+	if (type != hwmon_temp)
+		return -EINVAL;
+
+	if (attr != hwmon_temp_input)
+		return -EINVAL;
+
+	switch (channel) {
+	case 0:
+		core = 0;
+		place = 0;
+		break;
+	case 1:
+		core = 0;
+		place = 1;
+		break;
+	case 2:
+		core = 1;
+		place = 0;
+		break;
+	case 3:
+		core = 1;
+		place = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (data->swap_core_select)
+		core = core ? 0 : 1;
+
+	*val = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+
+	return 0;
+}
+
+static const struct hwmon_ops k8temp_ops = {
+	.is_visible = k8temp_is_visible,
+	.read = k8temp_read,
+};
+
+static const u32 k8temp_config[] = {
+	HWMON_T_INPUT,
+	HWMON_T_INPUT,
+	HWMON_T_INPUT,
+	HWMON_T_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info k8temp_temp_info = {
+	.type = hwmon_temp,
+	.config = k8temp_config,
+};
+
+static const struct hwmon_channel_info *k8temp_info[] = {
+	&k8temp_temp_info,
+	NULL
+};
+
+static const struct hwmon_chip_info k8temp_chip_info = {
+	.ops = &k8temp_ops,
+	.info = k8temp_info,
+};
+
 static int k8temp_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
-	int err;
 	u8 scfg;
 	u32 temp;
 	u8 model, stepping;
 	struct k8temp_data *data;
+	struct device *hwmon_dev;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL);
 	if (!data)

@@ -233,84 +274,23 @@ static int k8temp_probe(struct pci_dev *pdev,
 
 	data->name = "k8temp";
 	mutex_init(&data->update_lock);
-	pci_set_drvdata(pdev, data);
-
-	/* Register sysfs hooks */
-	err = device_create_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	if (err)
-		goto exit_remove;
-
-	/* sensor can be changed and reports something */
-	if (data->sensorsp & SEL_PLACE) {
-		err = device_create_file(&pdev->dev,
-				   &sensor_dev_attr_temp2_input.dev_attr);
-		if (err)
-			goto exit_remove;
-	}
-
-	/* core can be changed and reports something */
-	if (data->sensorsp & SEL_CORE) {
-		err = device_create_file(&pdev->dev,
-				   &sensor_dev_attr_temp3_input.dev_attr);
-		if (err)
-			goto exit_remove;
-		if (data->sensorsp & SEL_PLACE) {
-			err = device_create_file(&pdev->dev,
-					   &sensor_dev_attr_temp4_input.
-					   dev_attr);
-			if (err)
-				goto exit_remove;
-		}
-	}
 
-	err = device_create_file(&pdev->dev, &dev_attr_name);
-	if (err)
-		goto exit_remove;
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 data->name,
+							 data,
+							 &k8temp_chip_info,
+							 NULL);
 
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
 
 	return 0;
-
-exit_remove:
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp2_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp3_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp4_input.dev_attr);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	return err;
-}
-
-static void k8temp_remove(struct pci_dev *pdev)
-{
-	struct k8temp_data *data = pci_get_drvdata(pdev);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp2_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp3_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp4_input.dev_attr);
-	device_remove_file(&pdev->dev, &dev_attr_name);
 }
 
 static struct pci_driver k8temp_driver = {
 	.name = "k8temp",
 	.id_table = k8temp_ids,
 	.probe = k8temp_probe,
-	.remove = k8temp_remove,
 };
 
 module_pci_driver(k8temp_driver);
Signature · 1 line
2.22.0
maintainer
#2 lore raw

Hi Robert,

Quoted 8 lines · Robert Karszniewicz

Also removes hwmon_dev from k8temp_data struct, as that is now passed to callbacks, anyway.

Also reduces binary size:

    text    data     bss     dec     hex filename
    4185    1384       0    5569    15c1 drivers/hwmon/k8temp.ko.bak
    3877    1120       0    4997    1385 drivers/hwmon/k8temp.ko

Excellent. Couple of comments below.

Quoted 18 lines
Signed-off-by Robert Karszniewicz <[email protected]>
---
  drivers/hwmon/k8temp.c | 204 +++++++++++++++++++----------------------
  1 file changed, 92 insertions(+), 112 deletions(-)
drivers/hwmon/k8temp.c +0 -1
index 4994c90c8929..2e8fa1e07398 100644
@@ -13,7 +13,6 @@
  #include <linux/jiffies.h>
  #include <linux/pci.h>
  #include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
  #include <linux/err.h>
  #include <linux/mutex.h>
  #include <asm/processor.h>

drivers/hwmon/k8temp.c line 27

Quoted 6 lines
drivers/hwmon/k8temp.c +0 -1
@@ -24,7 +23,6 @@
  #define SEL_CORE	0x04
 
  struct k8temp_data {
-	struct device *hwmon_dev;
  	struct mutex update_lock;
  	const char *name;

No longer needed (see below)

Quoted 62 lines
drivers/hwmon/k8temp.c +1 -41
  	char valid;		/* zero until following fields are valid */

@@ -40,7 +38,7 @@ struct k8temp_data {
  static struct k8temp_data *k8temp_update_device(struct device *dev)
  {
  	struct k8temp_data *data = dev_get_drvdata(dev);
-	struct pci_dev *pdev = to_pci_dev(dev);
+	struct pci_dev *pdev = to_pci_dev(dev->parent);
  	u8 tmp;
 
  	mutex_lock(&data->update_lock);

@@ -82,50 +80,10 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
  	return data;
  }
 
-/*
- * Sysfs stuff
- */
-
-static ssize_t name_show(struct device *dev, struct device_attribute
-			 *devattr, char *buf)
-{
-	struct k8temp_data *data = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%s\n", data->name);
-}
-
-
-static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct sensor_device_attribute_2 *attr =
-	    to_sensor_dev_attr_2(devattr);
-	int core = attr->nr;
-	int place = attr->index;
-	int temp;
-	struct k8temp_data *data = k8temp_update_device(dev);
-
-	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
-		core = core ? 0 : 1;
-
-	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
-
-	return sprintf(buf, "%d\n", temp);
-}
-
-/* core, place */
-
-static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 0, 1);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 1, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 1, 1);
-static DEVICE_ATTR_RO(name);
-
  static const struct pci_device_id k8temp_ids[] = {
  	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
  	{ 0 },
  };
-
  MODULE_DEVICE_TABLE(pci, k8temp_ids);
 
  static int is_rev_g_desktop(u8 model)

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 125

Quoted 9 lines
drivers/hwmon/k8temp.c +6 -0
@@ -159,14 +117,97 @@ static int is_rev_g_desktop(u8 model)
  	return 1;
  }
 
+static umode_t
+k8temp_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+		  u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;

Not really needed since only temperature sensors are registered in the first place.

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 129

Quoted 4 lines
drivers/hwmon/k8temp.c +4 -0
+
+	if (attr != hwmon_temp_input)
+		return 0;
+

The idea here is to only create sensors if they actually exist, so I would expect something like the following here.

	struct k8temp_data *data = drvdata;

	if (attr != hwmon_temp_input)
		return 0;

	if ((channel & 1) && !(data->sensorsp & SEL_PLACE))
		return 0;

	if ((channel & 2) && !(data->sensorsp & SEL_CORE))
		return 0;

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 137

Quoted 8 lines
drivers/hwmon/k8temp.c +8 -0
+	return 0444;
+}
+
+static int
+k8temp_read(struct device *dev, enum hwmon_sensor_types type,
+	    u32 attr, int channel, long *val)
+{
+	struct k8temp_data *data = k8temp_update_device(dev);

It might make sense to remove all the caching. Reading the sensors isn't that expensive, after all. More on that see below.

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 145

Quoted 8 lines
drivers/hwmon/k8temp.c +8 -0
+	int core, place;
+
+	if (type != hwmon_temp)
+		return -EINVAL;
+
+	if (attr != hwmon_temp_input)
+		return -EINVAL;
+

The above checks are not needed here, since other sensors and types have not been instantiated.

Quoted 10 lines
drivers/hwmon/k8temp.c +10 -0
+	switch (channel) {
+	case 0:
+		core = 0;
+		place = 0;
+		break;
+	case 1:
+		core = 0;
+		place = 1;
+		break;
+	case 2:

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 165

Quoted 10 lines
drivers/hwmon/k8temp.c +10 -0
+		core = 1;
+		place = 0;
+		break;
+	case 3:
+		core = 1;
+		place = 1;
+		break;
+	default:
+		return -EINVAL;
+	}

How about

	core = (channel >> 1) & 1;
	place = channel & 1;

instead ?

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 168

Quoted 3 lines
drivers/hwmon/k8temp.c +3 -0
+
+	if (data->swap_core_select)
+		core = core ? 0 : 1;

		core = 1 - core;

would accomplish the same without conditional.

As for caching, let's see. Something like the following should do.

	struct pci_dev *pdev = to_pci_dev(dev);
	u32 temp;
	u8 tmp;
	...

	mutex_lock(&data->update_lock);
	pci_read_config_byte(pdev, REG_TEMP, &tmp);
	tmp &= ~(SEL_PLACE | SEL_CORE);
	if (channel)
		tmp |= SEL_PLACE;
	if (core)
		tmp |= SEL_CORE;
	pci_write_config_byte(pdev, REG_TEMP, tmp);
	pci_read_config_dword(pdev, REG_TEMP, &temp);
	mutex_unlock(&data->update_lock);

	*val = TEMP_FROM_REG(temp) + data->temp_offset;

... and then you could drop a lot of code.

Quoted 18 lines
drivers/hwmon/k8temp.c +18 -0
+
+	*val = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+
+	return 0;
+}
+
+static const struct hwmon_ops k8temp_ops = {
+	.is_visible = k8temp_is_visible,
+	.read = k8temp_read,
+};
+
+static const u32 k8temp_config[] = {
+	HWMON_T_INPUT,
+	HWMON_T_INPUT,
+	HWMON_T_INPUT,
+	HWMON_T_INPUT,
+	0
+};

drivers/hwmon/k8temp.c static int is_rev_g_desktop(u8 model) · line 196

Quoted 10 lines
drivers/hwmon/k8temp.c +10 -0
+	
+static const struct hwmon_channel_info k8temp_temp_info = {
+	.type = hwmon_temp,
+	.config = k8temp_config,
+};
+
+static const struct hwmon_channel_info *k8temp_info[] = {
+	&k8temp_temp_info,
+	NULL
+};

static const struct hwmon_channel_info *k8temp_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT),
NULL
};

Quoted 48 lines
drivers/hwmon/k8temp.c +7 -27
+
+static const struct hwmon_chip_info k8temp_chip_info = {
+	.ops = &k8temp_ops,
+	.info = k8temp_info,
+};
+
  static int k8temp_probe(struct pci_dev *pdev,
  				  const struct pci_device_id *id)
  {
-	int err;
  	u8 scfg;
  	u32 temp;
  	u8 model, stepping;
  	struct k8temp_data *data;
+	struct device *hwmon_dev;
 
  	data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL);
  	if (!data)

@@ -233,84 +274,23 @@ static int k8temp_probe(struct pci_dev *pdev,
 
  	data->name = "k8temp";
  	mutex_init(&data->update_lock);
-	pci_set_drvdata(pdev, data);
-
-	/* Register sysfs hooks */
-	err = device_create_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	if (err)
-		goto exit_remove;
-
-	/* sensor can be changed and reports something */
-	if (data->sensorsp & SEL_PLACE) {
-		err = device_create_file(&pdev->dev,
-				   &sensor_dev_attr_temp2_input.dev_attr);
-		if (err)
-			goto exit_remove;
-	}
-
-	/* core can be changed and reports something */
-	if (data->sensorsp & SEL_CORE) {
-		err = device_create_file(&pdev->dev,
-				   &sensor_dev_attr_temp3_input.dev_attr);
-		if (err)
-			goto exit_remove;
-		if (data->sensorsp & SEL_PLACE) {
-			err = device_create_file(&pdev->dev,
-					   &sensor_dev_attr_temp4_input.
-					   dev_attr);

drivers/hwmon/k8temp.c static int k8temp_probe(struct pci_dev *pdev, · line 279

Quoted 10 lines
drivers/hwmon/k8temp.c +2 -7
-			if (err)
-				goto exit_remove;
-		}
-	}
 
-	err = device_create_file(&pdev->dev, &dev_attr_name);
-	if (err)
-		goto exit_remove;
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 data->name,

data->name isn't needed. Just pass "k8temp" directly.

Quoted 4 lines
drivers/hwmon/k8temp.c +3 -0
+							 data,
+							 &k8temp_chip_info,
+							 NULL);

drivers/hwmon/k8temp.c static int k8temp_probe(struct pci_dev *pdev, · line 287

Quoted 10 lines
drivers/hwmon/k8temp.c +2 -6
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
-
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
 
  	return 0;

	return PTR_ERR_OR_ZERO(hwmon_dev);
Quoted 39 lines
drivers/hwmon/k8temp.c +0 -29
-
-exit_remove:
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp2_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp3_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp4_input.dev_attr);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	return err;
-}
-
-static void k8temp_remove(struct pci_dev *pdev)
-{
-	struct k8temp_data *data = pci_get_drvdata(pdev);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp2_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp3_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp4_input.dev_attr);
-	device_remove_file(&pdev->dev, &dev_attr_name);
  }
 
  static struct pci_driver k8temp_driver = {
  	.name = "k8temp",
  	.id_table = k8temp_ids,
  	.probe = k8temp_probe,
-	.remove = k8temp_remove,
  };
 
  module_pci_driver(k8temp_driver);
author
#3 lore raw

PATCH v2 1/1 hwmon: (k8temp) update to use new hwmon registration API

In reply to Robert Karszniewicz

Removes:
- hwmon_dev from k8temp_data struct, as that is now passed to callbacks, anyway.
- other k8temp_data struct fields, too.
- k8temp_update_device()

Also reduces binary size:

   text    data     bss     dec     hex filename
   4139    1448       0    5587    15d3 drivers/hwmon/k8temp.ko.bak
   3077    1220       0    4297    10c9 drivers/hwmon/k8temp.ko
Signed-off-by Robert Karszniewicz <[email protected]>

---
Changes from v1:
- correct is_visible() and remove unnecessary checks
- k8temp_read(): remove unnecessary checks and replace the switch
- use HWMON_CHANNEL_INFO()
- remove k8temp->name and pass the string directly
- use PTR_ERR_OR_ZERO()
- remove k8temp_update_device() and more k8temp_data fields

 drivers/hwmon/k8temp.c | 234 ++++++++++++-----------------------------
 1 file changed, 70 insertions(+), 164 deletions(-)
drivers/hwmon/k8temp.c +70 -164
index 4994c90c8929..0bedb3abee74 100644
@@ -10,10 +10,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/jiffies.h>
 #include <linux/pci.h>
 #include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <asm/processor.h>

@@ -24,108 +22,18 @@
 #define SEL_CORE	0x04
 
 struct k8temp_data {
-	struct device *hwmon_dev;
 	struct mutex update_lock;
-	const char *name;
-	char valid;		/* zero until following fields are valid */
-	unsigned long last_updated;	/* in jiffies */
 
 	/* registers values */
 	u8 sensorsp;		/* sensor presence bits - SEL_CORE, SEL_PLACE */
-	u32 temp[2][2];		/* core, place */
 	u8 swap_core_select;    /* meaning of SEL_CORE is inverted */
 	u32 temp_offset;
 };
 
-static struct k8temp_data *k8temp_update_device(struct device *dev)
-{
-	struct k8temp_data *data = dev_get_drvdata(dev);
-	struct pci_dev *pdev = to_pci_dev(dev);
-	u8 tmp;
-
-	mutex_lock(&data->update_lock);
-
-	if (!data->valid
-	    || time_after(jiffies, data->last_updated + HZ)) {
-		pci_read_config_byte(pdev, REG_TEMP, &tmp);
-		tmp &= ~(SEL_PLACE | SEL_CORE);	/* Select sensor 0, core0 */
-		pci_write_config_byte(pdev, REG_TEMP, tmp);
-		pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);
-
-		if (data->sensorsp & SEL_PLACE) {
-			tmp |= SEL_PLACE;	/* Select sensor 1, core0 */
-			pci_write_config_byte(pdev, REG_TEMP, tmp);
-			pci_read_config_dword(pdev, REG_TEMP,
-					      &data->temp[0][1]);
-		}
-
-		if (data->sensorsp & SEL_CORE) {
-			tmp &= ~SEL_PLACE;	/* Select sensor 0, core1 */
-			tmp |= SEL_CORE;
-			pci_write_config_byte(pdev, REG_TEMP, tmp);
-			pci_read_config_dword(pdev, REG_TEMP,
-					      &data->temp[1][0]);
-
-			if (data->sensorsp & SEL_PLACE) {
-				tmp |= SEL_PLACE; /* Select sensor 1, core1 */
-				pci_write_config_byte(pdev, REG_TEMP, tmp);
-				pci_read_config_dword(pdev, REG_TEMP,
-						      &data->temp[1][1]);
-			}
-		}
-
-		data->last_updated = jiffies;
-		data->valid = 1;
-	}
-
-	mutex_unlock(&data->update_lock);
-	return data;
-}
-
-/*
- * Sysfs stuff
- */
-
-static ssize_t name_show(struct device *dev, struct device_attribute
-			 *devattr, char *buf)
-{
-	struct k8temp_data *data = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%s\n", data->name);
-}
-
-
-static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	struct sensor_device_attribute_2 *attr =
-	    to_sensor_dev_attr_2(devattr);
-	int core = attr->nr;
-	int place = attr->index;
-	int temp;
-	struct k8temp_data *data = k8temp_update_device(dev);
-
-	if (data->swap_core_select && (data->sensorsp & SEL_CORE))
-		core = core ? 0 : 1;
-
-	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
-
-	return sprintf(buf, "%d\n", temp);
-}
-
-/* core, place */
-
-static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 0, 1);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 1, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 1, 1);
-static DEVICE_ATTR_RO(name);
-
 static const struct pci_device_id k8temp_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
 	{ 0 },
 };
-
 MODULE_DEVICE_TABLE(pci, k8temp_ids);
 
 static int is_rev_g_desktop(u8 model)

@@ -159,14 +67,77 @@ static int is_rev_g_desktop(u8 model)
 	return 1;
 }
 
+static umode_t
+k8temp_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+		  u32 attr, int channel)
+{
+	const struct k8temp_data *data = drvdata;
+
+	if ((channel & 1) && !(data->sensorsp & SEL_PLACE))
+		return 0;
+
+	if ((channel & 2) && !(data->sensorsp & SEL_CORE))
+		return 0;
+
+	return 0444;
+}
+
+static int
+k8temp_read(struct device *dev, enum hwmon_sensor_types type,
+	    u32 attr, int channel, long *val)
+{
+	struct k8temp_data *data = dev_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev->parent);
+	int core, place;
+	u32 temp;
+	u8 tmp;
+
+	core = (channel >> 1) & 1;
+	place = channel & 1;
+
+	if (data->swap_core_select)
+		core ^= 1;
+
+	mutex_lock(&data->update_lock);
+	pci_read_config_byte(pdev, REG_TEMP, &tmp);
+	tmp &= ~(SEL_PLACE | SEL_CORE);
+	if (core)
+		tmp |= SEL_CORE;
+	if (place)
+		tmp |= SEL_PLACE;
+	pci_write_config_byte(pdev, REG_TEMP, tmp);
+	pci_read_config_dword(pdev, REG_TEMP, &temp);
+	mutex_unlock(&data->update_lock);
+
+	*val = TEMP_FROM_REG(temp) + data->temp_offset;
+
+	return 0;
+}
+
+static const struct hwmon_ops k8temp_ops = {
+	.is_visible = k8temp_is_visible,
+	.read = k8temp_read,
+};
+
+static const struct hwmon_channel_info *k8temp_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+		HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_chip_info k8temp_chip_info = {
+	.ops = &k8temp_ops,
+	.info = k8temp_info,
+};
+
 static int k8temp_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
-	int err;
 	u8 scfg;
 	u32 temp;
 	u8 model, stepping;
 	struct k8temp_data *data;
+	struct device *hwmon_dev;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL);
 	if (!data)

@@ -231,86 +202,21 @@ static int k8temp_probe(struct pci_dev *pdev,
 			data->sensorsp &= ~SEL_CORE;
 	}
 
-	data->name = "k8temp";
 	mutex_init(&data->update_lock);
-	pci_set_drvdata(pdev, data);
-
-	/* Register sysfs hooks */
-	err = device_create_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	if (err)
-		goto exit_remove;
-
-	/* sensor can be changed and reports something */
-	if (data->sensorsp & SEL_PLACE) {
-		err = device_create_file(&pdev->dev,
-				   &sensor_dev_attr_temp2_input.dev_attr);
-		if (err)
-			goto exit_remove;
-	}
-
-	/* core can be changed and reports something */
-	if (data->sensorsp & SEL_CORE) {
-		err = device_create_file(&pdev->dev,
-				   &sensor_dev_attr_temp3_input.dev_attr);
-		if (err)
-			goto exit_remove;
-		if (data->sensorsp & SEL_PLACE) {
-			err = device_create_file(&pdev->dev,
-					   &sensor_dev_attr_temp4_input.
-					   dev_attr);
-			if (err)
-				goto exit_remove;
-		}
-	}
-
-	err = device_create_file(&pdev->dev, &dev_attr_name);
-	if (err)
-		goto exit_remove;
 
-	data->hwmon_dev = hwmon_device_register(&pdev->dev);
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 "k8temp",
+							 data,
+							 &k8temp_chip_info,
+							 NULL);
 
-	if (IS_ERR(data->hwmon_dev)) {
-		err = PTR_ERR(data->hwmon_dev);
-		goto exit_remove;
-	}
-
-	return 0;
-
-exit_remove:
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp2_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp3_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp4_input.dev_attr);
-	device_remove_file(&pdev->dev, &dev_attr_name);
-	return err;
-}
-
-static void k8temp_remove(struct pci_dev *pdev)
-{
-	struct k8temp_data *data = pci_get_drvdata(pdev);
-
-	hwmon_device_unregister(data->hwmon_dev);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp1_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp2_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp3_input.dev_attr);
-	device_remove_file(&pdev->dev,
-			   &sensor_dev_attr_temp4_input.dev_attr);
-	device_remove_file(&pdev->dev, &dev_attr_name);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
 static struct pci_driver k8temp_driver = {
 	.name = "k8temp",
 	.id_table = k8temp_ids,
 	.probe = k8temp_probe,
-	.remove = k8temp_remove,
 };
 
 module_pci_driver(k8temp_driver);
Signature · 1 line
2.22.0
author
#4 lore raw

PATCH 2/2 hwmon: (k8temp) documentation: update URL of datasheet

In reply to Robert Karszniewicz

The old URL is dead.

Signed-off-by Robert Karszniewicz <[email protected]>
---
 Documentation/hwmon/k8temp.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/hwmon/k8temp.rst +1 -1
index 72da12aa17e5..fe9109521056 100644
@@ -9,7 +9,7 @@ Supported chips:
 
     Addresses scanned: PCI space
 
-    Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
+    Datasheet: http://www.amd.com/system/files/TechDocs/32559.pdf
 
 Author: Rudolf Marek
Signature · 1 line
2.22.0
maintainer Applied
#5 lore raw

Re: [PATCH 2/2] hwmon: (k8temp) documentation: update URL of datasheet

Quoted 3 lines · Robert Karszniewicz

The old URL is dead.

Signed-off-by Robert Karszniewicz <[email protected]>

Applied.

Thanks,
Guenter

Quoted 18 lines
---
  Documentation/hwmon/k8temp.rst | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/hwmon/k8temp.rst +1 -1
index 72da12aa17e5..fe9109521056 100644
@@ -9,7 +9,7 @@ Supported chips:
 
      Addresses scanned: PCI space
 
-    Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
+    Datasheet: http://www.amd.com/system/files/TechDocs/32559.pdf
 
  Author: Rudolf Marek