Skip to contentSkip to conversation

dt-bindings: serial: lantiq: Convert to YAML & add support for new SoC

PATCH Superseded Rahul Tanwar 1 participant 3 messages Aug 14, 2019

Subsystems (2)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover dt-bindings: serial: lantiq: Convert to YAML & add support for new SoC

Patch 1 converts existing dt bindings txt file to YAML schema.

Patch 2 updates the dt bindings YAML contents to add support for newly supported Intel Lightning Mountain(LGM) SoC.

These patches are baselined upon Linux 5.3-rc4 at below Git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git

Rahul Tanwar (2):
dt-bindings: serial: lantiq: Convert to YAML schema
dt-bindings: lantiq: Update for new SoC

 .../devicetree/bindings/serial/lantiq_asc.txt      | 31 --------
 .../devicetree/bindings/serial/lantiq_asc.yaml     | 87 ++++++++++++++++++++++
 2 files changed, 87 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.txt
 create mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.yaml
Signature · 1 line
2.11.0
#1 lore raw

PATCH 1/2 dt-bindings: serial: lantiq: Convert to YAML schema

Convert the existing DT binding document for Lantiq SoC ASC serial controller from txt format to YAML format.

---
 .../devicetree/bindings/serial/lantiq_asc.txt      | 31 ----------
 .../devicetree/bindings/serial/lantiq_asc.yaml     | 70 ++++++++++++++++++++++
 2 files changed, 70 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.txt
 create mode 100644 Documentation/devicetree/bindings/serial/lantiq_asc.yaml
Documentation/devicetree/bindings/serial/lantiq_asc.txt deleted +0 -31
deleted file mode 100644
index 40e81a5818f6..000000000000
@@ -1,31 +0,0 @@
-Lantiq SoC ASC serial controller
-
-Required properties:
-- compatible : Should be "lantiq,asc"
-- reg : Address and length of the register set for the device
-- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
-  depends on the interrupt-parent interrupt controller.
-
-Optional properties:
-- clocks: Should contain frequency clock and gate clock
-- clock-names: Should be "freq" and "asc"
-
-Example:
-
-asc0: serial@16600000 {
-	compatible = "lantiq,asc";
-	reg = <0x16600000 0x100000>;
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
-		<GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
-	clock-names = "freq", "asc";
-};
-
-asc1: serial@e100c00 {
-	compatible = "lantiq,asc";
-	reg = <0xE100C00 0x400>;
-	interrupt-parent = <&icu0>;
-	interrupts = <112 113 114>;
-};
Documentation/devicetree/bindings/serial/lantiq_asc.yaml new file +70 -0

70 lines not on this page · raw message

Signature · 1 line
2.11.0
#2 lore raw

PATCH 2/2 dt-bindings: lantiq: Update for new SoC

In reply to Rahul Tanwar

Intel Lightning Mountain(LGM) SoC reuses Lantiq ASC serial controller IP. This patch updates the dt bindings to support LGM as well.

---
 .../devicetree/bindings/serial/lantiq_asc.yaml          | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
Documentation/devicetree/bindings/serial/lantiq_asc.yaml +17 -0
index 9757f0a24232..d552fd31c16c 100644
@@ -17,6 +17,7 @@ properties:
     oneOf:
       items:
         - const: lantiq,asc
+        - const: intel,lgm-asc
 
   reg:
     maxItems: 1
@@ -28,6 +29,12 @@ properties:
       - description: tx or combined interrupt
       - description: rx interrupt
       - description: err interrupt
+    description:
+      For lantiq,asc compatible, it supports 3 separate
+      interrupts for tx rx & err. Whereas, for intel,lgm-asc
+      compatible, it supports combined single interrupt for 
+      all of tx, rx & err interrupts.
+
 
   clocks:
     description:
@@ -67,4 +74,14 @@ examples:
             interrupts = <112 113 114>;
     };
 
+  - |
+    asc0: serial@e0a00000 {
+            compatible = "intel,lgm-asc";
+            reg = <0xe0a00000 0x1000>;
+            interrupt-parent = <&ioapic1>;
+            interrupts = <128 1>;
+            clocks = <&cgu0 LGM_CLK_NOC4>, <&cgu0 LGM_GCLK_ASC0>;
+            clock-names = "freq", "asc";
+    };
+
 ...
Signature · 1 line
2.11.0