Skip to contentSkip to conversation

hv: vmbus: add fuzz testing to hv device

PATCH Applied Branden Bonaby 3 participants 5 messages Oct 3, 2019 – Oct 4, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v6 cover hv: vmbus: add fuzz testing to hv device

This patchset introduces a testing framework for Hyper-V drivers. This framework allows us to introduce delays in the packet receive path on a per-device basis. While the current code only supports introducing arbitrary delays in the host/guest communication path, we intend to expand this to support error injection in the future.

changes in v6:
patch 1:
changed kernel version in Documentation/ABI/testing/debugfs-hyperv to 5.5

removed less than 0 if statement when dealing with u64 datatype, as suggested by michael.

changes in v5:
patch 1:
As per Stephen's suggestion, Moved CONFIG_HYPERV_TESTING to lib/Kconfig.debug.

Fixed build issue reported by Kbuild, with Michael's suggestion to make hv_debugfs part of the hv_vmbus module.

changes in v4:
patch 1:
Combined previous v3 patches 1 and 2, into a single patch which is now patch 1. This was done so that calls to the new debugfs functions are in the same patch as the definitions for these functions.

Moved debugfs code from "vmbus_drv.c" that was in previous v3 patch 2, into a new file "debugfs.c" in drivers/hv.

Updated the Makefile to compile "debugfs.c" if CONFIG_HYPERV_TESTING is enabled

As per Michael's comments, added empty implementations of the new functions, so the compiler will not generate code when CONFIG_HYPERV_TESTING is not enabled.

patch 2 (was previously v3 patch 3):
Based on Harrys comments, made the tool more user friendly and added more error checking.

changes in v3:
patch 2: change call to IS_ERR_OR_NULL, to IS_ERR.

patch 3: Align python tool to match Linux coding style.

Changes in v2:
Patch 1: As per Vitaly's suggestion, wrapped the test code under an
#ifdef and updated the Kconfig file, so that the test code will only be used when the config option is set to true. (default is false).

Updated hyperv_vmbus header to contain new #ifdef with new new functions for the test code.

Patch 2: Moved code from under sysfs to debugfs and wrapped it under
the new ifdef.

Updated MAINTAINERS file with new debugfs-hyperv file under the section for hyperv.

Patch 3: Updated testing tool with new debugfs location.

Branden Bonaby (2):
drivers: hv: vmbus: Introduce latency testing
tools: hv: add vmbus testing tool

 Documentation/ABI/testing/debugfs-hyperv |  23 ++
 MAINTAINERS                              |   1 +
 drivers/hv/Makefile                      |   1 +
 drivers/hv/connection.c                  |   1 +
 drivers/hv/hv_debugfs.c                  | 178 +++++++++++
 drivers/hv/hyperv_vmbus.h                |  31 ++
 drivers/hv/ring_buffer.c                 |   2 +
 drivers/hv/vmbus_drv.c                   |   6 +
 include/linux/hyperv.h                   |  19 ++
 lib/Kconfig.debug                        |   7 +
 tools/hv/vmbus_testing                   | 376 +++++++++++++++++++++++
 11 files changed, 645 insertions(+)
 create mode 100644 Documentation/ABI/testing/debugfs-hyperv
 create mode 100644 drivers/hv/hv_debugfs.c
 create mode 100755 tools/hv/vmbus_testing
Signature · 1 line
2.17.1
#1 lore raw

PATCH v6 1/2 drivers: hv: vmbus: Introduce latency testing

Introduce user specified latency in the packet reception path By exposing the test parameters as part of the debugfs channel attributes. We will control the testing state via these attributes.

---
changes in v6:
- changed kernel version in Documentation/ABI/testing/debugfs-hyperv to 5.5

- removed less than 0 if statement when dealing with u64 datatype, as suggested by Michael.

changes in v5:
- As per Stephen's suggestion, Moved CONFIG_HYPERV_TESTING to lib/Kconfig.debug.

- Fixed build issue reported by Kbuild, with Michael's suggestion to make hv_debugfs part of the hv_vmbus module.

- updated debugfs-hyperv to show kernel version 5.4

changes in v4:
- Combined v3 patch 2 into this patch, and changed the commit description to reflect this.

- Moved debugfs code from "vmbus_drv.c" that was in previous v3 patch 2, into a new file "debugfs.c" in drivers/hv.

- Updated the Makefile to compile "debugfs.c" if
CONFIG_HYPERV_TESTING is enabled

- As per Michael's comments, added empty implementations of the new functions, so the compiler will not generate code when CONFIG_HYPERV_TESTING is not enabled.

- Added microseconds into description for files in Documentation/ABI/testing/debugfs-hyperv.

Changes in v2:
- Add #ifdef in Kconfig file so test code will not interfere with non-test code.
- Move test code functions for delay to hyperv_vmbus header file.
- Wrap test code under #ifdef statement.

 Documentation/ABI/testing/debugfs-hyperv |  23 +++
 MAINTAINERS                              |   1 +
 drivers/hv/Makefile                      |   1 +
 drivers/hv/connection.c                  |   1 +
 drivers/hv/hv_debugfs.c                  | 178 +++++++++++++++++++++++
 drivers/hv/hyperv_vmbus.h                |  31 ++++
 drivers/hv/ring_buffer.c                 |   2 +
 drivers/hv/vmbus_drv.c                   |   6 +
 include/linux/hyperv.h                   |  19 +++
 lib/Kconfig.debug                        |   7 +
 10 files changed, 269 insertions(+)
 create mode 100644 Documentation/ABI/testing/debugfs-hyperv
 create mode 100644 drivers/hv/hv_debugfs.c
Documentation/ABI/testing/debugfs-hyperv new file +23 -0
new file mode 100644
index 000000000000..9185e1b06bba
@@ -0,0 +1,23 @@
+What:           /sys/kernel/debug/hyperv/<UUID>/fuzz_test_state
+Date:           October 2019
+KernelVersion:  5.5
+Contact:        Branden Bonaby <[email protected]>
+Description:    Fuzz testing status of a vmbus device, whether its in an ON
+                state or a OFF state
+Users:          Debugging tools
+
+What:           /sys/kernel/debug/hyperv/<UUID>/delay/fuzz_test_buffer_interrupt_delay
+Date:           October 2019
+KernelVersion:  5.5
+Contact:        Branden Bonaby <[email protected]>
+Description:    Fuzz testing buffer interrupt delay value between 0 - 1000
+		 microseconds (inclusive).
+Users:          Debugging tools
+
+What:           /sys/kernel/debug/hyperv/<UUID>/delay/fuzz_test_message_delay
+Date:           October 2019
+KernelVersion:  5.5
+Contact:        Branden Bonaby <[email protected]>
+Description:    Fuzz testing message delay value between 0 - 1000 microseconds
+		 (inclusive).
+Users:          Debugging tools
MAINTAINERS +1 -0
index 55199ef7fa74..9801b1924213 100644
@@ -7581,6 +7581,7 @@ F:	include/uapi/linux/hyperv.h
 F:	include/asm-generic/mshyperv.h
 F:	tools/hv/
 F:	Documentation/ABI/stable/sysfs-bus-vmbus
+F:	Documentation/ABI/testing/debugfs-hyperv
 
 HYPERBUS SUPPORT
 M:	Vignesh Raghavendra <[email protected]>
drivers/hv/Makefile +1 -0
index a1eec7177c2d..94daf8240c95 100644
@@ -9,4 +9,5 @@ CFLAGS_hv_balloon.o = -I$(src)
 hv_vmbus-y := vmbus_drv.o \
 		 hv.o connection.o channel.o \
 		 channel_mgmt.o ring_buffer.o hv_trace.o
+hv_vmbus-$(CONFIG_HYPERV_TESTING)	+= hv_debugfs.o
 hv_utils-y := hv_util.o hv_kvp.o hv_snapshot.o hv_fcopy.o hv_utils_transport.o
drivers/hv/connection.c +1 -0
index 6e4c015783ff..7001b1ab4cdd 100644
@@ -361,6 +361,7 @@ void vmbus_on_event(unsigned long data)
 
 	trace_vmbus_on_event(channel);
 
+	hv_debug_delay_test(channel, INTERRUPT_DELAY);
 	do {
 		void (*callback_fn)(void *);
 
drivers/hv/hv_debugfs.c new file +178 -0

178 lines not on this page · raw message

drivers/hv/hyperv_vmbus.h +31 -0
index af9379a3bf89..20edcfd3b96c 100644
@@ -385,4 +385,35 @@ enum hvutil_device_state {
 	HVUTIL_DEVICE_DYING,     /* driver unload is in progress */
 };
 
+enum delay {
+	INTERRUPT_DELAY = 0,
+	MESSAGE_DELAY   = 1,
+};
+
+#ifdef CONFIG_HYPERV_TESTING
+
+int hv_debug_add_dev_dir(struct hv_device *dev);
+void hv_debug_rm_dev_dir(struct hv_device *dev);
+void hv_debug_rm_all_dir(void);
+int hv_debug_init(void);
+void hv_debug_delay_test(struct vmbus_channel *channel, enum delay delay_type);
+
+#else /* CONFIG_HYPERV_TESTING */
+
+static inline void hv_debug_rm_dev_dir(struct hv_device *dev) {};
+static inline void hv_debug_rm_all_dir(void) {};
+static inline void hv_debug_delay_test(struct vmbus_channel *channel,
+				       enum delay delay_type) {};
+static inline int hv_debug_init(void)
+{
+	return -1;
+}
+
+static inline int hv_debug_add_dev_dir(struct hv_device *dev)
+{
+	return -1;
+}
+
+#endif /* CONFIG_HYPERV_TESTING */
+
 #endif /* _HYPERV_VMBUS_H */
drivers/hv/ring_buffer.c +2 -0
index 9a03b163cbbd..356e22159e83 100644
@@ -396,6 +396,7 @@ struct vmpacket_descriptor *hv_pkt_iter_first(struct vmbus_channel *channel)
 	struct hv_ring_buffer_info *rbi = &channel->inbound;
 	struct vmpacket_descriptor *desc;
 
+	hv_debug_delay_test(channel, MESSAGE_DELAY);
 	if (hv_pkt_iter_avail(rbi) < sizeof(struct vmpacket_descriptor))
 		return NULL;
 
@@ -421,6 +422,7 @@ __hv_pkt_iter_next(struct vmbus_channel *channel,
 	u32 packetlen = desc->len8 << 3;
 	u32 dsize = rbi->ring_datasize;
 
+	hv_debug_delay_test(channel, MESSAGE_DELAY);
 	/* bump offset to next potential packet */
 	rbi->priv_read_index += packetlen + VMBUS_PKT_TRAILER;
 	if (rbi->priv_read_index >= dsize)
drivers/hv/vmbus_drv.c +6 -0
index 391f0b225c9a..e785dd485b9b 100644
@@ -958,6 +958,8 @@ static void vmbus_device_release(struct device *device)
 	struct hv_device *hv_dev = device_to_hv_device(device);
 	struct vmbus_channel *channel = hv_dev->channel;
 
+	hv_debug_rm_dev_dir(hv_dev);
+
 	mutex_lock(&vmbus_connection.channel_mutex);
 	hv_process_channel_removal(channel);
 	mutex_unlock(&vmbus_connection.channel_mutex);
@@ -1810,6 +1812,7 @@ int vmbus_device_register(struct hv_device *child_device_obj)
 		pr_err("Unable to register primary channeln");
 		goto err_kset_unregister;
 	}
+	hv_debug_add_dev_dir(child_device_obj);
 
 	return 0;
 
@@ -2369,6 +2372,7 @@ static int __init hv_acpi_init(void)
 		ret = -ETIMEDOUT;
 		goto cleanup;
 	}
+	hv_debug_init();
 
 	ret = vmbus_bus_init();
 	if (ret)
@@ -2405,6 +2409,8 @@ static void __exit vmbus_exit(void)
 
 		tasklet_kill(&hv_cpu->msg_dpc);
 	}
+	hv_debug_rm_all_dir();
+
 	vmbus_free_channels();
 
 	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE) {
include/linux/hyperv.h +19 -0
index b4a017093b69..ac66577852d1 100644
@@ -932,6 +932,21 @@ struct vmbus_channel {
 	 * full outbound ring buffer.
 	 */
 	u64 out_full_first;
+
+	/* enabling/disabling fuzz testing on the channel (default is false)*/
+	bool fuzz_testing_state;
+
+	/*
+	 * Interrupt delay will delay the guest from emptying the ring buffer
+	 * for a specific amount of time. The delay is in microseconds and will
+	 * be between 1 to a maximum of 1000, its default is 0 (no delay).
+	 * The  Message delay will delay guest reading on a per message basis
+	 * in microseconds between 1 to 1000 with the default being 0
+	 * (no delay).
+	 */
+	u32 fuzz_testing_interrupt_delay;
+	u32 fuzz_testing_message_delay;
+
 };
 
 static inline bool is_hvsock_channel(const struct vmbus_channel *c)
@@ -1180,6 +1195,10 @@ struct hv_device {
 
 	struct vmbus_channel *channel;
 	struct kset	     *channels_kset;
+
+	/* place holder to keep track of the dir for hv device in debugfs */
+	struct dentry *debug_dir;
+
 };
 
 
lib/Kconfig.debug +7 -0
index 93d97f9b0157..55eebbc0b0fb 100644
@@ -2127,4 +2127,11 @@ config IO_STRICT_DEVMEM
 
 source "arch/$(SRCARCH)/Kconfig.debug"
 
+config HYPERV_TESTING
+	bool "Microsoft Hyper-V driver testing"
+	default n
+	depends on HYPERV && DEBUG_FS
+	help
+	  Select this option to enable Hyper-V vmbus testing.
+
 endmenu # Kernel hacking
Signature · 1 line
2.17.1
#3 lore raw

PATCH v6 2/2 tools: hv: add vmbus testing tool

In reply to Branden Bonaby

This is a userspace tool to drive the testing. Currently it supports introducing user specified delay in the host to guest communication path on a per-channel basis.

---
Changes in v4:
- Based on Harrys comments, made the tool more
user friendly and added more error checking.

Changes in v3:
- Align python tool to match Linux coding style.

Changes in v2:
- Move testing location to new location in debugfs.

 tools/hv/vmbus_testing | 376 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 376 insertions(+)
 create mode 100755 tools/hv/vmbus_testing
tools/hv/vmbus_testing new file +376 -0
new file mode 100755
index 000000000000..e7212903dd1d
@@ -0,0 +1,376 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+#
+# Program to allow users to fuzz test Hyper-V drivers
+# by interfacing with Hyper-V debugfs attributes.
+# Current test methods available:
+#       1. delay testing
+#
+# Current file/directory structure of hyper-V debugfs:
+#       /sys/kernel/debug/hyperv/UUID
+#       /sys/kernel/debug/hyperv/UUID/<test-state filename>
+#       /sys/kernel/debug/hyperv/UUID/<test-method sub-directory>
+#
+# author: Branden Bonaby <[email protected]>
+
+import os
+import cmd
+import argparse
+import glob
+from argparse import RawDescriptionHelpFormatter
+from argparse import RawTextHelpFormatter
+from enum import Enum
+
+# Do not change unless, you change the debugfs attributes
+# in /drivers/hv/debugfs.c. All fuzz testing
+# attributes will start with "fuzz_test".
+
+# debugfs path for hyperv must exist before proceeding
+debugfs_hyperv_path = "/sys/kernel/debug/hyperv"
+if not os.path.isdir(debugfs_hyperv_path):
+        print("{} doesn't exist/check permissions".format(debugfs_hyperv_path))
+        exit(-1)
+
+class dev_state(Enum):
+        off = 0
+        on = 1
+
+# File names, that correspond to the files created in
+# /drivers/hv/debugfs.c
+class f_names(Enum):
+        state_f = "fuzz_test_state"
+        buff_f =  "fuzz_test_buffer_interrupt_delay"
+        mess_f =  "fuzz_test_message_delay"
+
+# Both single_actions and all_actions are used
+# for error checking and to allow for some subparser
+# names to be abbreviated. Do not abbreviate the
+# test method names, as it will become less intuitive
+# as to what the user can do. If you do decide to
+# abbreviate the test method name, make sure the main
+# function reflects this change.
+
+all_actions = [
+        "disable_all",
+        "D",
+        "enable_all",
+        "view_all",
+        "V"
+]
+
+single_actions = [
+        "disable_single",
+        "d",
+        "enable_single",
+        "view_single",
+        "v"
+]
+
+def main():
+
+        file_map = recursive_file_lookup(debugfs_hyperv_path, dict())
+        args = parse_args()
+        if (not args.action):
+                print ("Error, no options selected...exiting")
+                exit(-1)
+        arg_set = { k for (k,v) in vars(args).items() if v and k != "action" }
+        arg_set.add(args.action)
+        path = args.path if "path" in arg_set else None
+        if (path and path[-1] == "/"):
+                path = path[:-1]
+        validate_args_path(path, arg_set, file_map)
+        if (path and "enable_single" in arg_set):
+            state_path = locate_state(path, file_map)
+            set_test_state(state_path, dev_state.on.value, args.quiet)
+
+        # Use subparsers as the key for different actions
+        if ("delay" in arg_set):
+                validate_delay_values(args.delay_time)
+                if (args.enable_all):
+                        set_delay_all_devices(file_map, args.delay_time,
+                                              args.quiet)
+                else:
+                        set_delay_values(path, file_map, args.delay_time,
+                                         args.quiet)
+        elif ("disable_all" in arg_set or "D" in arg_set):
+                disable_all_testing(file_map)
+        elif ("disable_single" in arg_set or "d" in arg_set):
+                disable_testing_single_device(path, file_map)
+        elif ("view_all" in arg_set or "V" in arg_set):
+                get_all_devices_test_status(file_map)
+        elif ("view_single" in arg_set or  "v" in arg_set):
+                get_device_test_values(path, file_map)
+
+# Get the state location
+def locate_state(device, file_map):
+        return file_map[device][f_names.state_f.value]
+
+# Validate delay values to make sure they are acceptable to
+# enable delays on a device
+def validate_delay_values(delay):
+
+        if (delay[0]  == -1 and delay[1] == -1):
+                print("\nError, At least 1 value must be greater than 0")
+                exit(-1)
+        for i in delay:
+                if (i < -1 or i == 0 or i > 1000):
+                        print("\nError, Values must be  equal to -1 "
+                              "or be > 0 and <= 1000")
+                        exit(-1)
+
+# Validate argument path
+def validate_args_path(path, arg_set, file_map):
+
+        if (not path and any(element in arg_set for element in single_actions)):
+                print("Error, path (-p) REQUIRED for the specified option. "
+                      "Use (-h) to check usage.")
+                exit(-1)
+        elif (path and any(item in arg_set for item in all_actions)):
+                print("Error, path (-p) NOT REQUIRED for the specified option. "
+                      "Use (-h) to check usage." )
+                exit(-1)
+        elif (path not in file_map and any(item in arg_set
+                                           for item in single_actions)):
+                print("Error, path '{}' not a valid vmbus device".format(path))
+                exit(-1)
+
+# display Testing status of single device
+def get_device_test_values(path, file_map):
+
+        for name in file_map[path]:
+                file_location = file_map[path][name]
+                print( name + " = " + str(read_test_files(file_location)))
+
+# Create a map of the vmbus devices and their associated files
+# [key=device, value = [key = filename, value = file path]]
+def recursive_file_lookup(path, file_map):
+
+        for f_path in glob.iglob(path + '**/*'):
+                if (os.path.isfile(f_path)):
+                        if (f_path.rsplit("/",2)[0] == debugfs_hyperv_path):
+                                directory = f_path.rsplit("/",1)[0]
+                        else:
+                                directory = f_path.rsplit("/",2)[0]
+                        f_name = f_path.split("/")[-1]
+                        if (file_map.get(directory)):
+                                file_map[directory].update({f_name:f_path})
+                        else:
+                                file_map[directory] = {f_name:f_path}
+                elif (os.path.isdir(f_path)):
+                        recursive_file_lookup(f_path,file_map)
+        return file_map
+
+# display Testing state of devices
+def get_all_devices_test_status(file_map):
+
+        for device in file_map:
+                if (get_test_state(locate_state(device, file_map)) is 1):
+                        print("Testing = ON for: {}"
+                              .format(device.split("/")[5]))
+                else:
+                        print("Testing = OFF for: {}"
+                              .format(device.split("/")[5]))
+
+# read the vmbus device files, path must be absolute path before calling
+def read_test_files(path):
+        try:
+                with open(path,"r") as f:
+                        file_value = f.readline().strip()
+                return int(file_value)
+
+        except IOError as e:
+                errno, strerror = e.args
+                print("I/O error({0}): {1} on file {2}"
+                      .format(errno, strerror, path))
+                exit(-1)
+        except ValueError:
+                print ("Element to int conversion error in: \n{}".format(path))
+                exit(-1)
+
+# writing to vmbus device files, path must be absolute path before calling
+def write_test_files(path, value):
+
+        try:
+                with open(path,"w") as f:
+                        f.write("{}".format(value))
+        except IOError as e:
+                errno, strerror = e.args
+                print("I/O error({0}): {1} on file {2}"
+                      .format(errno, strerror, path))
+                exit(-1)
+
+# set testing state of device
+def set_test_state(state_path, state_value, quiet):
+
+        write_test_files(state_path, state_value)
+        if (get_test_state(state_path) is 1):
+                if (not quiet):
+                        print("Testing = ON for device: {}"
+                              .format(state_path.split("/")[5]))
+        else:
+                if (not quiet):
+                        print("Testing = OFF for device: {}"
+                              .format(state_path.split("/")[5]))
+
+# get testing state of device
+def get_test_state(state_path):
+        #state == 1 - test = ON
+        #state == 0 - test = OFF
+        return  read_test_files(state_path)
+
+# write 1 - 1000 microseconds, into a single device using the
+# fuzz_test_buffer_interrupt_delay and fuzz_test_message_delay
+# debugfs attributes
+def set_delay_values(device, file_map, delay_length, quiet):
+
+        try:
+                interrupt = file_map[device][f_names.buff_f.value]
+                message = file_map[device][f_names.mess_f.value]
+
+                # delay[0]- buffer interrupt delay, delay[1]- message delay
+                if (delay_length[0] >= 0 and delay_length[0] <= 1000):
+                        write_test_files(interrupt, delay_length[0])
+                if (delay_length[1] >= 0 and delay_length[1] <= 1000):
+                        write_test_files(message, delay_length[1])
+                if (not quiet):
+                        print("Buffer delay testing = {} for: {}"
+                              .format(read_test_files(interrupt),
+                                      interrupt.split("/")[5]))
+                        print("Message delay testing = {} for: {}"
+                              .format(read_test_files(message),
+                                      message.split("/")[5]))
+        except IOError as e:
+                errno, strerror = e.args
+                print("I/O error({0}): {1} on files {2}{3}"
+                      .format(errno, strerror, interrupt, message))
+                exit(-1)
+
+# enabling delay testing on all devices
+def set_delay_all_devices(file_map, delay, quiet):
+
+        for device in (file_map):
+                set_test_state(locate_state(device, file_map),
+                               dev_state.on.value,
+                               quiet)
+                set_delay_values(device, file_map, delay, quiet)
+
+# disable all testing on a SINGLE device.
+def disable_testing_single_device(device, file_map):
+
+        for name in file_map[device]:
+                file_location = file_map[device][name]
+                write_test_files(file_location, dev_state.off.value)
+        print("ALL testing now OFF for {}".format(device.split("/")[-1]))
+
+# disable all testing on ALL devices
+def disable_all_testing(file_map):
+
+        for device in file_map:
+                disable_testing_single_device(device, file_map)
+
+def parse_args():
+        parser = argparse.ArgumentParser(prog = "vmbus_testing",usage ="\n"
+                "%(prog)s [delay]   [-h] [-e|-E] -t [-p]\n"
+                "%(prog)s [view_all       | V]      [-h]\n"
+                "%(prog)s [disable_all    | D]      [-h]\n"
+                "%(prog)s [disable_single | d]      [-h|-p]\n"
+                "%(prog)s [view_single    | v]      [-h|-p]\n"
+                "%(prog)s --version\n",
+                description = "\nUse lsvmbus to get vmbus device type "
+                "information.\n" "\nThe debugfs root path is "
+                "/sys/kernel/debug/hyperv",
+                formatter_class = RawDescriptionHelpFormatter)
+        subparsers = parser.add_subparsers(dest = "action")
+        parser.add_argument("--version", action = "version",
+                version = '%(prog)s 0.1.0')
+        parser.add_argument("-q","--quiet", action = "store_true",
+                help = "silence none important test messages."
+                       " This will only work when enabling testing"
+                       " on a device.")
+        # Use the path parser to hold the --path attribute so it can
+        # be shared between subparsers. Also do the same for the state
+        # parser, as all testing methods will use --enable_all and
+        # enable_single.
+        path_parser = argparse.ArgumentParser(add_help=False)
+        path_parser.add_argument("-p","--path", metavar = "",
+                help = "Debugfs path to a vmbus device. The path "
+                "must be the absolute path to the device.")
+        state_parser = argparse.ArgumentParser(add_help=False)
+        state_group = state_parser.add_mutually_exclusive_group(required = True)
+        state_group.add_argument("-E", "--enable_all", action = "store_const",
+                                 const = "enable_all",
+                                 help = "Enable the specified test type "
+                                 "on ALL vmbus devices.")
+        state_group.add_argument("-e", "--enable_single",
+                                 action = "store_const",
+                                 const = "enable_single",
+                                 help = "Enable the specified test type on a "
+                                 "SINGLE vmbus device.")
+        parser_delay = subparsers.add_parser("delay",
+                        parents = [state_parser, path_parser],
+                        help = "Delay the ring buffer interrupt or the "
+                        "ring buffer message reads in microseconds.",
+                        prog = "vmbus_testing",
+                        usage = "%(prog)s [-h]\n"
+                        "%(prog)s -E -t [value] [value]\n"
+                        "%(prog)s -e -t [value] [value] -p",
+                        description = "Delay the ring buffer interrupt for "
+                        "vmbus devices, or delay the ring buffer message "
+                        "reads for vmbus devices (both in microseconds). This "
+                        "is only on the host to guest channel.")
+        parser_delay.add_argument("-t", "--delay_time", metavar = "", nargs = 2,
+                        type = check_range, default =[0,0], required = (True),
+                        help = "Set [buffer] & [message] delay time. "
+                        "Value constraints: -1 == value "
+                        "or 0 < value <= 1000.\n"
+                        "Use -1 to keep the previous value for that delay "
+                        "type, or a value > 0 <= 1000 to change the delay "
+                        "time.")
+        parser_dis_all = subparsers.add_parser("disable_all",
+                        aliases = ['D'], prog = "vmbus_testing",
+                        usage = "%(prog)s [disable_all | D] -h\n"
+                        "%(prog)s [disable_all | D]\n",
+                        help = "Disable ALL testing on ALL vmbus devices.",
+                        description = "Disable ALL testing on ALL vmbus "
+                        "devices.")
+        parser_dis_single = subparsers.add_parser("disable_single",
+                        aliases = ['d'],
+                        parents = [path_parser], prog = "vmbus_testing",
+                        usage = "%(prog)s [disable_single | d] -h\n"
+                        "%(prog)s [disable_single | d] -p\n",
+                        help = "Disable ALL testing on a SINGLE vmbus device.",
+                        description = "Disable ALL testing on a SINGLE vmbus "
+                        "device.")
+        parser_view_all = subparsers.add_parser("view_all", aliases = ['V'],
+                        help = "View the test state for ALL vmbus devices.",
+                        prog = "vmbus_testing",
+                        usage = "%(prog)s [view_all | V] -h\n"
+                        "%(prog)s [view_all | V]\n",
+                        description = "This shows the test state for ALL the "
+                        "vmbus devices.")
+        parser_view_single = subparsers.add_parser("view_single",
+                        aliases = ['v'],parents = [path_parser],
+                        help = "View the test values for a SINGLE vmbus "
+                        "device.",
+                        description = "This shows the test values for a SINGLE "
+                        "vmbus device.", prog = "vmbus_testing",
+                        usage = "%(prog)s [view_single | v] -h\n"
+                        "%(prog)s [view_single | v] -p")
+
+        return  parser.parse_args()
+
+# value checking for range checking input in parser
+def check_range(arg1):
+
+        try:
+                val = int(arg1)
+        except ValueError as err:
+                raise argparse.ArgumentTypeError(str(err))
+        if val < -1 or val > 1000:
+                message = ("\n\nvalue must be -1 or  0 < value <= 1000. "
+                           "Value program received: {}\n").format(val)
+                raise argparse.ArgumentTypeError(message)
+        return val
+
+if __name__ == "__main__":
+        main()
Signature · 1 line
2.17.1
Reviewed-by on v6 1/2
#2 lore raw

RE: [PATCH v6 1/2] drivers: hv: vmbus: Introduce latency testing

In reply to Branden Bonaby

From: Branden Bonaby <[email protected]> Sent: Thursday, October 3, 2019 2:02 PM

Quoted 49 lines

Introduce user specified latency in the packet reception path By exposing the test parameters as part of the debugfs channel attributes. We will control the testing state via these attributes.

---
changes in v6:
- changed kernel version in Documentation/ABI/testing/debugfs-hyperv to 5.5

- removed less than 0 if statement when dealing with u64 datatype, as suggested by Michael.

changes in v5:
- As per Stephen's suggestion, Moved CONFIG_HYPERV_TESTING to lib/Kconfig.debug.

- Fixed build issue reported by Kbuild, with Michael's suggestion to make hv_debugfs part of the hv_vmbus module.

- updated debugfs-hyperv to show kernel version 5.4

changes in v4:
- Combined v3 patch 2 into this patch, and changed the commit description to reflect this.

- Moved debugfs code from "vmbus_drv.c" that was in previous v3 patch 2, into a new file "debugfs.c" in drivers/hv.

- Updated the Makefile to compile "debugfs.c" if
CONFIG_HYPERV_TESTING is enabled

- As per Michael's comments, added empty implementations of the new functions, so the compiler will not generate code when CONFIG_HYPERV_TESTING is not enabled.

- Added microseconds into description for files in Documentation/ABI/testing/debugfs-hyperv.

Changes in v2:
- Add #ifdef in Kconfig file so test code will not interfere with non-test code.
- Move test code functions for delay to hyperv_vmbus header file.
- Wrap test code under #ifdef statement.

Quoted 14 lines
 Documentation/ABI/testing/debugfs-hyperv |  23 +++
 MAINTAINERS                              |   1 +
 drivers/hv/Makefile                      |   1 +
 drivers/hv/connection.c                  |   1 +
 drivers/hv/hv_debugfs.c                  | 178 +++++++++++++++++++++++
 drivers/hv/hyperv_vmbus.h                |  31 ++++
 drivers/hv/ring_buffer.c                 |   2 +
 drivers/hv/vmbus_drv.c                   |   6 +
 include/linux/hyperv.h                   |  19 +++
 lib/Kconfig.debug                        |   7 +
 10 files changed, 269 insertions(+)
 create mode 100644 Documentation/ABI/testing/debugfs-hyperv
 create mode 100644 drivers/hv/hv_debugfs.c
Applied
#4 lore raw
In reply to Branden Bonaby
Quoted 5 lines · Branden Bonaby

This patchset introduces a testing framework for Hyper-V drivers. This framework allows us to introduce delays in the packet receive path on a per-device basis. While the current code only supports introducing arbitrary delays in the host/guest communication path, we intend to expand this to support error injection in the future.

I've queued it up for hyperv-next, thanks!

--
Thanks,
Sasha