add support to STM LSM6DS0 6-axis Mems sensor
Subsystems (3)
Lorenzo Bianconi
maintainercover add support to STM LSM6DS0 6-axis Mems sensor
Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on the same register map used by LSM9DS1
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add support to LSM6DS0
dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 18 insertions(+), 2 deletions(-)
Signature · 1 line
2.21.0
Lorenzo Bianconi
maintainerPATCH 1/2 iio: imu: st_lsm6dsx: add support to LSM6DS0
Add support to STM LSM6DS0 6-axis (acc + gyro) Mems sensor
--- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 5 files changed, 17 insertions(+), 2 deletions(-)
drivers/iio/imu/st_lsm6dsx/Kconfig +1 -1
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, - ism330dhcx and the accelerometer/gyroscope of lsm9ds1. + ism330dhcx, lsm6ds0 and the accelerometer/gyroscope of lsm9ds1. To compile this driver as a module, choose M here: the module will be called st_lsm6dsx.
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2 -0
@@ -26,6 +26,7 @@#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c"#define ST_ISM330DHCX_DEV_NAME "ism330dhcx"#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" +#define ST_LSM6DS0_DEV_NAME "lsm6ds0"enum st_lsm6dsx_hw_id {ST_LSM6DS3_ID ,
@@ -40,6 +41,7 @@ enum st_lsm6dsx_hw_id {ST_LSM6DS3TRC_ID ,ST_ISM330DHCX_ID ,ST_LSM9DS1_ID , +ST_LSM6DS0_ID , ST_LSM6DSX_MAX_ID, };
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +4 -1
@@ -32,7 +32,7 @@* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 3KB * -* - LSM9DS1: +* - LSM9DS1/LSM6DS0: * - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952
@@ -104,6 +104,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { { .hw_id = ST_LSM9DS1_ID, .name = ST_LSM9DS1_DEV_NAME, + }, { + .hw_id = ST_LSM6DS0_ID, + .name = ST_LSM6DS0_DEV_NAME, }, }, .channels = {
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +5 -0
@@ -87,6 +87,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm9ds1-imu", .data = (void *)ST_LSM9DS1_ID, }, + { + .compatible = "st,lsm6ds0", + .data = (void *)ST_LSM6DS0_ID, + }, {}, };MODULE_DEVICE_TABLE (of, st_lsm6dsx_i2c_of_match);
@@ -104,6 +108,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, + { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, {}, };MODULE_DEVICE_TABLE (i2c, st_lsm6dsx_i2c_id_table);
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +5 -0
@@ -87,6 +87,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm9ds1-imu", .data = (void *)ST_LSM9DS1_ID, }, + { + .compatible = "st,lsm6ds0", + .data = (void *)ST_LSM6DS0_ID, + }, {}, };MODULE_DEVICE_TABLE (of, st_lsm6dsx_spi_of_match);
@@ -104,6 +108,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, + { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, {}, };MODULE_DEVICE_TABLE (spi, st_lsm6dsx_spi_id_table);
Signature · 1 line
2.21.0
Lorenzo Bianconi
maintainerPATCH 2/2 dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings
In reply to Lorenzo Bianconi--- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +1 -0
@@ -14,6 +14,7 @@ Required properties: "st,lsm6ds3tr-c" "st,ism330dhcx" "st,lsm9ds1-imu" + "st,lsm6ds0" - reg: i2c address of the sensor / spi cs line Optional properties:
Signature · 1 line
2.21.0
Jonathan Cameron
maintainerQuoted 2 lines · On Mon, 7 Oct 2019 11:43:36 +0200 Lorenzo Bianconi <[email protected]> wrote:
Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on the same register map used by LSM9DS1
I'm feeling paranoid. Is this definitely different form the LSM6DSO which is already supported?
If so ST loose for stupid part naming.
Jonathan
Quoted 13 lines
Lorenzo Bianconi (2):
iio: imu:st_lsm6dsx: add support to LSM6DS0
dt-bindings: iio: imu:st_lsm6dsx: add lsm6ds0 device bindingsDocumentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 18 insertions(+), 2 deletions(-)
Quoted 10 lines
Quoted 2 lines · On Mon, 7 Oct 2019 11:43:36 +0200 Lorenzo Bianconi <[email protected]> wrote:
Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on the same register map used by LSM9DS1
I'm feeling paranoid. Is this definitely different form the LSM6DSO which is already supported?
If so ST loose for stupid part naming.
Yes, it is very different..AFAIK LSM6DSO is last IMU sensor from ST while LSM6DS0 is very old (it has the same register map used in LSM9DS1 imu).
Regards,
Lorenzo
Quoted 17 lines
Jonathan
Quoted 13 lines
Lorenzo Bianconi (2):
iio: imu:st_lsm6dsx: add support to LSM6DS0
dt-bindings: iio: imu:st_lsm6dsx: add lsm6ds0 device bindingsDocumentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 18 insertions(+), 2 deletions(-)
Jonathan Cameron
maintainerRe: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS0
In reply to Lorenzo BianconiQuoted 3 lines · On Mon, 7 Oct 2019 11:43:37 +0200 Lorenzo Bianconi <[email protected]> wrote:
Add support to STM LSM6DS0 6-axis (acc + gyro) Mems sensor
Signed-off-by Lorenzo Bianconi <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.
Thanks,
Jonathan
Quoted 110 lines
--- drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 5 files changed, 17 insertions(+), 2 deletions(-)drivers/iio/imu/st_lsm6dsx/Kconfig +1
-1@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c, - ism330dhcx and the accelerometer/gyroscope of lsm9ds1. + ism330dhcx, lsm6ds0 and the accelerometer/gyroscope of lsm9ds1. To compile this driver as a module, choose M here: the module will be called st_lsm6dsx.drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2
-0@@ -26,6 +26,7 @@#define ST_LSM6DS3TRC_DEV_NAME "lsm6ds3tr-c"#define ST_ISM330DHCX_DEV_NAME "ism330dhcx"#define ST_LSM9DS1_DEV_NAME "lsm9ds1-imu" +#define ST_LSM6DS0_DEV_NAME "lsm6ds0"enum st_lsm6dsx_hw_id {ST_LSM6DS3_ID ,@@ -40,6 +41,7 @@ enum st_lsm6dsx_hw_id {ST_LSM6DS3TRC_ID ,ST_ISM330DHCX_ID ,ST_LSM9DS1_ID , +ST_LSM6DS0_ID , ST_LSM6DSX_MAX_ID, };drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +4
-1@@ -32,7 +32,7 @@* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 * - FIFO size: 3KB * -* - LSM9DS1: +* - LSM9DS1/LSM6DS0: * - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952 * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 * - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952 @@ -104,6 +104,9 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { { .hw_id = ST_LSM9DS1_ID, .name = ST_LSM9DS1_DEV_NAME, + }, { + .hw_id = ST_LSM6DS0_ID, + .name = ST_LSM6DS0_DEV_NAME, }, }, .channels = {drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +5
-0@@ -87,6 +87,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { .compatible = "st,lsm9ds1-imu", .data = (void *)ST_LSM9DS1_ID, }, + { + .compatible = "st,lsm6ds0", + .data = (void *)ST_LSM6DS0_ID, + }, {}, };MODULE_DEVICE_TABLE (of, st_lsm6dsx_i2c_of_match);@@ -104,6 +108,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, + { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, {}, };MODULE_DEVICE_TABLE (i2c, st_lsm6dsx_i2c_id_table);drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +5
-0@@ -87,6 +87,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = { .compatible = "st,lsm9ds1-imu", .data = (void *)ST_LSM9DS1_ID, }, + { + .compatible = "st,lsm6ds0", + .data = (void *)ST_LSM6DS0_ID, + }, {}, };MODULE_DEVICE_TABLE (of, st_lsm6dsx_spi_of_match);@@ -104,6 +108,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { { ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID }, { ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID }, { ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID }, + { ST_LSM6DS0_DEV_NAME, ST_LSM6DS0_ID }, {}, };MODULE_DEVICE_TABLE (spi, st_lsm6dsx_spi_id_table);
Jonathan Cameron
maintainerQuoted 6 lines · On Sat, 12 Oct 2019 15:27:08 +0200 Lorenzo Bianconi…
Quoted 6 lines
Quoted 2 lines · On Mon, 7 Oct 2019 11:43:36 +0200 Lorenzo Bianconi <[email protected]> wrote:
Add support to STM LSM6DS0 6-axis sensor. Just compiled, but LSM6DS0 relies on the same register map used by LSM9DS1
Quoted 8 lines
Quoted 4 lines
I'm feeling paranoid. Is this definitely different form the LSM6DSO which is already supported?
If so ST loose for stupid part naming.
Yes, it is very different..AFAIK LSM6DSO is last IMU sensor from ST while LSM6DS0 is very old (it has the same register map used in LSM9DS1 imu).
No way anything could possibly go wrong ;)
*dramatic sigh*
Quoted 22 lines
Regards,
LorenzoQuoted 17 lines
Jonathan
Quoted 13 lines
Lorenzo Bianconi (2):
iio: imu:st_lsm6dsx: add support to LSM6DS0
dt-bindings: iio: imu:st_lsm6dsx: add lsm6ds0 device bindingsDocumentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 ++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 5 ++++- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++++ 6 files changed, 18 insertions(+), 2 deletions(-)
Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds0 device bindings
In reply to Lorenzo BianconiQuoted 1 line · On Mon, 7 Oct 2019 11:43:38 +0200 Lorenzo Bianconi <[email protected]> wrote:
Signed-off-by Lorenzo Bianconi <[email protected]>
Applied.
Now a yaml conversion would be cool if you happened to get bored ;)
Jonathan
Quoted 16 lines
--- Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +1
-0@@ -14,6 +14,7 @@ Required properties: "st,lsm6ds3tr-c" "st,ism330dhcx" "st,lsm9ds1-imu" + "st,lsm6ds0" - reg: i2c address of the sensor / spi cs line Optional properties: