Skip to contentSkip to conversation

Btrfs support for RAID1C34

PATCH In review David Sterba 2 participants 5 messages Nov 4, 2019 – Nov 29, 2019

lore
Share & tools
lore
#0 lore raw

cover Btrfs support for RAID1C34

Hi,

btrfs is going to get support for 3- and 4-copy RAID1,
https://lore.kernel.org/linux-btrfs/[email protected]/

This patch adds the support. The code changes are minimal, it's essentially only extension of what RAID1 does.

I haven't tested it though, the docs don't see to cover filesystem support testing. What I tried:

* make btrfs_test
* ./btrfs_test

It did not find any compressible file from the candidate list, I wonder why a dummy zero-filled file cannot be created instead.

Then running it seems to create only the default profile of the images (mkfs prints only single/dup for data and metadata), the following message seems to repeat without any real progress:

--

Label:              grub_;/testé莭莽😁киритi urewfceniuewruevrewnuuireurevueurnievrewfnerfcnevirivinrewvnirewnivrewiuvcrewvnuewvrrrewniuerwreiuviurewiuviurewnuvewnvrenurnunuvrevuurerejiremvreijnvcreivire nverivnreivrevnureiorfnfrvoeoiroireoireoifrefoieroifoireoi
UUID:               f6d3e26c-4d6c-407d-b981-7aa6d842578a
Node size:          16384
Sector size:        4096
Filesystem size:    5.66GiB
Block group profiles:
  Data:             single            8.00MiB
  Metadata:         DUP             256.00MiB
  System:           DUP               8.00MiB
SSD detected:       no
Incompat features:  extref, skinny-metadata
Number of devices:  1
Devices:
   ID        SIZE  PATH
    1     5.66GiB  /dev/loop0

Device proc: Filesystem type procfs - Sector size 512B - Total size 0KiB
Device loop0: Filesystem type btrfs - Label `grub_;/testé莭莽😁киритi urewfceniuewruevrewnuuireurevueurnievrewfnerfcnevirivinrewvnirewnivrewiuvcrewvnuewvrrrewniuerwreiuviurewiuviurewnuvewnvrenurnunuvrevuurerejiremvreijnvcreivire nverivnreivrevnureiorfnfrvoeoiroireoireoifrefoieroifoireoi', UUID f6d3e26c-4d6c-407d-b981-7aa6d842578a - Sector size 512B - Total size 5939200KiB Device host: Filesystem type hostfs - Sector size 512B - Total size 0KiB

umount: /tmp/tmp.1I3JDrkI64/btrfs_zstd_rw: not mounted. --

There must be something I'm missing, please advise. Thanks.

David Sterba (1):
btrfs: add support for new raid1c34 profiles

 grub-core/fs/btrfs.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
Signature · 1 line
2.23.0
#1 lore raw

PATCH 1/1 btrfs: add support for new raid1c34 profiles

There are new 3- and 4-copy variants of RAID1, estimated to be merged to kernel 5.5. Add the two new profiles to the list of recognized ones. As this builds on the same code as RAID1, only the redundancy level needs to be adjusted, the rest is done by the existing code.

---
 grub-core/fs/btrfs.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
grub-core/fs/btrfs.c +10 -2
index 48bd3d04a5e6..66e301b3f13c 100644
@@ -136,6 +136,8 @@ struct grub_btrfs_chunk_item
 #define GRUB_BTRFS_CHUNK_TYPE_RAID10        0x40
 #define GRUB_BTRFS_CHUNK_TYPE_RAID5         0x80
 #define GRUB_BTRFS_CHUNK_TYPE_RAID6         0x100
+#define GRUB_BTRFS_CHUNK_TYPE_RAID1C3       0x200
+#define GRUB_BTRFS_CHUNK_TYPE_RAID1C4       0x400
   grub_uint8_t dummy2[0xc];
   grub_uint16_t nstripes;
   grub_uint16_t nsubstripes;
@@ -964,14 +966,20 @@ grub_btrfs_read_logical (struct grub_btrfs_data *data, grub_disk_addr_t addr,
 	      csize = (stripen + 1) * stripe_length - off;
 	      break;
 	    }
+	  case GRUB_BTRFS_CHUNK_TYPE_RAID1C4:
+	    redundancy++;
+	    /* fall through */
+	  case GRUB_BTRFS_CHUNK_TYPE_RAID1C3:
+	    redundancy++;
+	    /* fall through */
 	  case GRUB_BTRFS_CHUNK_TYPE_DUPLICATED:
 	  case GRUB_BTRFS_CHUNK_TYPE_RAID1:
 	    {
-	      grub_dprintf ("btrfs", "RAID1\n");
+	      redundancy++;
+	      grub_dprintf ("btrfs", "RAID1 (copies: %d)\n", redundancy);
 	      stripen = 0;
 	      stripe_offset = off;
 	      csize = grub_le_to_cpu64 (chunk->size) - off;
-	      redundancy = 2;
 	      break;
 	    }
 	  case GRUB_BTRFS_CHUNK_TYPE_RAID0:
Signature · 1 line
2.23.0
Reviewed-by on v1 1/1
#2 lore raw

Re: [PATCH 1/1] btrfs: add support for new raid1c34 profiles

Quoted 6 lines · David Sterba

There are new 3- and 4-copy variants of RAID1, estimated to be merged to kernel 5.5. Add the two new profiles to the list of recognized ones. As this builds on the same code as RAID1, only the redundancy level needs to be adjusted, the rest is done by the existing code.

if patches are in Linux kernel 5.5 (or later). So, please drop me a line when it happens.

Daniel

Quoted 42 lines
---
 grub-core/fs/btrfs.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
grub-core/fs/btrfs.c +10 -3
index 48bd3d04a5e6..66e301b3f13c 100644
@@ -136,6 +136,8 @@ struct grub_btrfs_chunk_item
 #define GRUB_BTRFS_CHUNK_TYPE_RAID10        0x40
 #define GRUB_BTRFS_CHUNK_TYPE_RAID5         0x80
 #define GRUB_BTRFS_CHUNK_TYPE_RAID6         0x100
+#define GRUB_BTRFS_CHUNK_TYPE_RAID1C3       0x200
+#define GRUB_BTRFS_CHUNK_TYPE_RAID1C4       0x400
   grub_uint8_t dummy2[0xc];
   grub_uint16_t nstripes;
   grub_uint16_t nsubstripes;
@@ -964,14 +966,20 @@ grub_btrfs_read_logical (struct grub_btrfs_data *data, grub_disk_addr_t addr,
 	      csize = (stripen + 1) * stripe_length - off;
 	      break;
 	    }
+	  case GRUB_BTRFS_CHUNK_TYPE_RAID1C4:
+	    redundancy++;
+	    /* fall through */
+	  case GRUB_BTRFS_CHUNK_TYPE_RAID1C3:
+	    redundancy++;
+	    /* fall through */
 	  case GRUB_BTRFS_CHUNK_TYPE_DUPLICATED:
 	  case GRUB_BTRFS_CHUNK_TYPE_RAID1:
 	    {
-	      grub_dprintf ("btrfs", "RAID1\n");
+	      redundancy++;
+	      grub_dprintf ("btrfs", "RAID1 (copies: %d)\n", redundancy);
 	      stripen = 0;
 	      stripe_offset = off;
 	      csize = grub_le_to_cpu64 (chunk->size) - off;
-	      redundancy = 2;
 	      break;
 	    }
 	  case GRUB_BTRFS_CHUNK_TYPE_RAID0:
--

2.23.0

#3 lore raw

Re: [PATCH 1/1] btrfs: add support for new raid1c34 profiles

Quoted 11 lines · Daniel Kiper
Quoted 6 lines · David Sterba

There are new 3- and 4-copy variants of RAID1, estimated to be merged to kernel 5.5. Add the two new profiles to the list of recognized ones. As this builds on the same code as RAID1, only the redundancy level needs to be adjusted, the rest is done by the existing code.

if patches are in Linux kernel 5.5 (or later). So, please drop me a line when it happens.

FYI, the kernel code has been merged, first milestone will be 5.5-rc1 in a week o so.

#4 lore raw

Re: [PATCH 1/1] btrfs: add support for new raid1c34 profiles

Quoted 7 lines · David Sterba
Quoted 6 lines · Daniel Kiper
Quoted 5 lines · David Sterba

There are new 3- and 4-copy variants of RAID1, estimated to be merged to kernel 5.5. Add the two new profiles to the list of recognized ones. As this builds on the same code as RAID1, only the redundancy level needs to be adjusted, the rest is done by the existing code.

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

if patches are in Linux kernel 5.5 (or later). So, please drop me a line when it happens.

FYI, the kernel code has been merged, first milestone will be 5.5-rc1 in a week o so.

Great! I will merge this patch next week or so.

Daniel