Introduce support for concatenated ranges
v2 cover Introduce support for concatenated ranges
This is the counterpart of kernel series:
nftables: Set implementation for arbitrary concatenation of ranges
and it has a UAPI dependency on kernel patch:
[PATCH nf-next 1/8] nf_tables: Support for subkeys, set with multiple ranged fields
Patch 1/3 adds support for NFT_SET_SUBKEY: these new netlink attributes specify the length of fields within concatenations, and they are needed by set implementations in the kernel to figure out where single fields start and stop.
Patch 2/3 introduces new key data semantics needed to represent arbitrary concatenation of ranges with minimal UAPI modifications, as well as required changes in lexer and expression evaluation.
Patch 3/3 adds test cases for operations on the new set type.
I'm not updating the UAPI header copy in this series, please let me know if I'd better do that.
v2: changes listed in messages for 2/3 and 3/3
Stefano Brivio (3):
src: Add support for and export NFT_SET_SUBKEY attributes
src: Add support for concatenated set ranges
tests: Introduce test for set with concatenated ranges
include/expression.h | 2 + include/rule.h | 7 + src/evaluate.c | 25 ++- src/mnl.c | 4 + src/netlink.c | 99 ++++++++--- src/parser_bison.y | 89 ++++------ src/rule.c | 10 +- src/segtree.c | 117 +++++++++++++ .../testcases/sets/0041concatenated_ranges_0 | 162 ++++++++++++++++++ 9 files changed, 417 insertions(+), 98 deletions(-) create mode 100755 tests/shell/testcases/sets/0041concatenated_ranges_0
Signature · 1 line
2.20.1
PATCH v2 1/3 src: Add support for and export NFT_SET_SUBKEY attributes
To support arbitrary range concatenations, the kernel needs to know how long each field in the concatenation is.
While evaluating concatenated expressions, export the datatype size, in bits, into the new subkey_len array, and hand the data over via libnftnl.
Note that, while the subkey length is expressed in bits, and the kernel attribute is 32-bit long to make UAPI more future-proof, we just reserve 8 bits for it, at the moment, and still store this data in bits.
As we don't have subkeys exceeding 128 bits in length, this should be fine, at least for a while, but it can be easily changed later on to use the full 32 bits allowed by the netlink attribute.
This change depends on the UAPI kernel patch with title:
netfilter: nf_tables: Support for subkeys, set with multiple ranged fields
---
v2: No changes
include/expression.h | 1 + include/rule.h | 1 + src/evaluate.c | 12 ++++++++---- src/mnl.c | 4 ++++ 4 files changed, 14 insertions(+), 4 deletions(-)
include/expression.h +1 -0
@@ -256,6 +256,7 @@ struct expr {struct list_head expressions;unsigned int size;uint32_t set_flags; +uint8_t subkey_len[NFT_REG32_COUNT ]; };struct {/* EXPR_SET_REF */
include/rule.h +1 -0
@@ -308,6 +308,7 @@ struct set {struct expr *rg_cache;uint32_t policy;bool automerge; +uint8_t subkey_len[NFT_REG32_COUNT ];struct {uint32_t size; } desc;
src/evaluate.c +8 -4
@@ -1211,7 +1211,7 @@ static int expr_evaluate_concat(struct eval_ctx *ctx, struct expr **expr, {const struct datatype *dtype = ctx->ectx.dtype, *tmp;uint32_t type = dtype ? dtype->type :0 , ntype =0 ; -int off = dtype ? dtype->subtypes :0 ; +int off = dtype ? dtype->subtypes :0 , subkey_idx =0 ;unsigned int flags =EXPR_F_CONSTANT |EXPR_F_SINGLETON ;struct expr *i, *next;
@@ -1240,6 +1240,8 @@ static int expr_evaluate_concat(struct eval_ctx *ctx, struct expr **expr, i->dtype->name); ntype =concat_subtype_add (ntype, i->dtype->type); + + (*expr)->subkey_len[subkey_idx++] = i->dtype->size; } (*expr)->flags |= flags;
@@ -3301,9 +3303,11 @@ static int set_evaluate(struct eval_ctx *ctx, struct set *set)"specified in %s definition" , set->key->dtype->name, type); } -if (set->flags &NFT_SET_INTERVAL && - set->key->etype ==EXPR_CONCAT ) -return set_error (ctx, set,"concatenated types not supported in interval sets" ); +if (set->flags &NFT_SET_INTERVAL && set->key->etype ==EXPR_CONCAT ) { +memcpy (&set->subkey_len, &set->key->subkey_len, +sizeof (set->subkey_len)); + set->flags |=NFT_SET_SUBKEY ; + }if (set_is_datamap (set->flags)) {if (set->datatype ==NULL )
src/mnl.c +4 -0
@@ -881,6 +881,10 @@ int mnl_nft_set_add(struct netlink_ctx *ctx, const struct cmd *cmd, set->automerge))memory_allocation_error (); +if (set->flags &NFT_SET_SUBKEY ) +nftnl_set_set_data (nls,NFTNL_SET_SUBKEY , &set->subkey_len, +sizeof (set->subkey_len)); +nftnl_set_set_data (nls,NFTNL_SET_USERDATA ,nftnl_udata_buf_data (udbuf),nftnl_udata_buf_len (udbuf));nftnl_udata_buf_free (udbuf);
Signature · 1 line
2.20.1
PATCH v2 2/3 src: Add support for concatenated set ranges
In reply to Stefano BrivioAfter exporting subkey (field) lengths via netlink attributes, we now need to adjust parsing of user input and generation of netlink key data to complete support for concatenation of set ranges.
The expression of concatenated ranges is described in the kernel counterpart for this change, quoted here:
--
In order to specify the interval for a set entry, userspace would simply keep using two elements per entry, as it happens now, with the end element indicating the upper interval bound. As a single element can now be a concatenation of several fields, with or without the NFT_SET_ELEM_INTERVAL_END flag, we obtain a convenient way to support multiple ranged fields in a set.
[...]
For example, "packets with an IPv4 address between 192.0.2.0 and 192.0.2.42, with destination port between 22 and 25", can be expressed as two concatenated elements:
192.0.2.0 . 22
192.0.2.42 . 25 with NFT_SET_ELEM_INTERVAL_END
and the NFTA_SET_SUBKEY attributes would be 32, 16, in that order.
Note that this does *not* represent the concatenated range:
0xc0 0x00 0x02 0x00 0x00 0x16 - 0xc0 0x00 0x02 0x2a 0x00 0x25
on the six packet bytes of interest. That is, the range specified does *not* include e.g. 0xc0 0x00 0x02 0x29 0x00 0x42, which is:
192.0.0.41 . 66
--
To achieve this, we need to:
- adjust the lexer rules to allow multiton expressions as elements of a concatenation. As wildcards are not allowed (semantics would be ambiguous), exclude wildcards expressions from the set of possible multiton expressions, and allow them directly where needed. Concatenations now admit prefixes and ranges
- generate, for each concatenated range, two elements: one containing the start expressions, and one containing the end expressions for all fields in the concatenation
- also expand prefixes and non-ranged values in the concatenation to ranges: given a set with interval and subkey support, the kernel has no way to tell which elements are ranged, so they all need to be. So, for example, 192.0.2.0 . 192.0.2.9 : 1024 is sent as the two elements:
192.0.2.0 : 1024
192.0.2.9 : 1024 [end]- aggregate ranges when elements for NFT_SET_SUBKEY sets are received by the kernel, see concat_range_aggregate()
- perform a few minor adjustments where interval expressions are already handled: we have intervals in these sets, but the set specification isn't just an interval, so we can't just aggregate and deaggregate interval ranges linearly
v2:
- reworked netlink_gen_concat_data(), moved loop body to a new function, netlink_gen_concat_data_expr() (Phil Sutter)
- dropped repeated pattern in bison file, replaced by a new helper, compound_expr_alloc_or_add() (Phil Sutter)
- added set_is_nonconcat_range() helper (Phil Sutter)
- in expr_evaluate_set(), we need to set NFT_SET_SUBKEY also on empty sets where the set in the context already has the flag
- dropped additional 'end' parameter from netlink_gen_data(), temporarily set EXPR_F_INTERVAL_END on expressions and use that from netlink_gen_concat_data() to figure out we need to add the 'end' element (Phil Sutter)
- replace range_mask_len() by a simplified version, as we don't need to actually store the composing masks of a range (Phil Sutter)
--- include/expression.h | 1 + include/rule.h | 6 +++ src/evaluate.c | 13 ++++- src/netlink.c | 99 +++++++++++++++++++++++++----------- src/parser_bison.y | 89 +++++++++++--------------------- src/rule.c | 10 ++-- src/segtree.c | 117 +++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 241 insertions(+), 94 deletions(-)
include/expression.h +1 -0
@@ -459,6 +459,7 @@ extern int set_to_intervals(struct list_head *msgs, struct set *set, struct expr *init, bool add, unsigned int debug_mask, bool merge, struct output_ctx *octx); +extern void concat_range_aggregate (struct expr *set);extern void interval_map_decompose (struct expr *set); extern struct expr *get_set_intervals(const struct set *set,
include/rule.h +6 -0
@@ -364,6 +364,12 @@ static inline bool set_is_meter(uint32_t set_flags)return set_is_anonymous (set_flags) && (set_flags &NFT_SET_EVAL ); } +static inline bool set_is_non_concat_range (uint32_t set_flags) +{ +return (set_flags & + (NFT_SET_INTERVAL |NFT_SET_SUBKEY )) ==NFT_SET_INTERVAL ; +} +#include <statement.h> struct counter {
src/evaluate.c +12 -1
@@ -136,6 +136,11 @@ static int byteorder_conversion(struct eval_ctx *ctx, struct expr **expr,if ((*expr)->byteorder == byteorder)return 0 ; + +/* Conversion for EXPR_CONCAT is handled for single composing ranges */ +if ((*expr)->etype ==EXPR_CONCAT ) +return 0 ; +if (expr_basetype (*expr)->type !=TYPE_INTEGER ) return expr_error(ctx->msgs, *expr, "Byteorder mismatch: expected %s, got %s",
@@ -1352,10 +1357,16 @@ static int expr_evaluate_set(struct eval_ctx *ctx, struct expr **expr) set->size += i->size -1 ; set->set_flags |= i->set_flags;expr_free (i); - }else if (!expr_is_singleton (i)) + }else if (!expr_is_singleton (i)) { set->set_flags |=NFT_SET_INTERVAL ; +if (i->key->etype ==EXPR_CONCAT ) + set->set_flags |=NFT_SET_SUBKEY ; + } } +if (ctx->set && ctx->set->flags & (NFT_SET_SUBKEY )) + set->set_flags |=NFT_SET_SUBKEY ; + set->set_flags |=NFT_SET_CONSTANT ;datatype_set (set, ctx->ectx.dtype);
src/netlink.c +71 -28
151 lines not on this page · raw message
src/parser_bison.y +29 -60
138 lines not on this page · raw message
src/rule.c +5 -5
@@ -1525,7 +1525,7 @@ static int do_add_setelems(struct netlink_ctx *ctx, struct cmd *cmd, table =table_lookup (h, &ctx->nft->cache); set =set_lookup (table, h->set.name); -if (set->flags &NFT_SET_INTERVAL && +if (set_is_non_concat_range (set->flags) &&set_to_intervals (ctx->msgs, set, init, true, ctx->nft->debug_mask, set->automerge, &ctx->nft->output) <0 )
@@ -1540,7 +1540,7 @@ static int do_add_set(struct netlink_ctx *ctx, const struct cmd *cmd,struct set *set = cmd->set;if (set->init !=NULL ) { -if (set->flags &NFT_SET_INTERVAL && +if (set_is_non_concat_range (set->flags) &&set_to_intervals (ctx->msgs, set, set->init, true, ctx->nft->debug_mask, set->automerge, &ctx->nft->output) <0 )
@@ -1626,7 +1626,7 @@ static int do_delete_setelems(struct netlink_ctx *ctx, struct cmd *cmd) table =table_lookup (h, &ctx->nft->cache); set =set_lookup (table, h->set.name); -if (set->flags &NFT_SET_INTERVAL && +if (set_is_non_concat_range (set->flags) &&set_to_intervals (ctx->msgs, set, expr, false, ctx->nft->debug_mask, set->automerge, &ctx->nft->output) <0 )
@@ -2480,7 +2480,7 @@ static int do_get_setelems(struct netlink_ctx *ctx, struct cmd *cmd, set =set_lookup (table, cmd->handle.set.name);/* Create a list of elements based of what we got from command line. */ -if (set->flags &NFT_SET_INTERVAL ) +if (set_is_non_concat_range (set->flags)) init =get_set_intervals (set, cmd->expr);else init = cmd->expr;
@@ -2493,7 +2493,7 @@ static int do_get_setelems(struct netlink_ctx *ctx, struct cmd *cmd,if (err >=0 )__do_list_set (ctx, cmd, table, new_set); -if (set->flags &NFT_SET_INTERVAL ) +if (set_is_non_concat_range (set->flags))expr_free (init);set_free (new_set);
src/segtree.c +117 -0
135 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH v2 3/3 tests: Introduce test for set with concatenated ranges
In reply to Stefano BrivioThis test checks that set elements can be added, deleted, that addition and deletion are refused when appropriate, that entries time out properly, and that they can be fetched by matching values in the given ranges.
v2:
- actually check an IPv6 prefix, instead of specifying everything as explicit ranges in ELEMS_ipv6_addr
- renumber test to 0041, 0038 already exists
--- .../testcases/sets/0041concatenated_ranges_0 | 162 ++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100755 tests/shell/testcases/sets/0041concatenated_ranges_0
tests/shell/testcases/sets/0041concatenated_ranges_0 new file +162 -0
@@ -0,0 +1,162 @@ +#!/bin/sh -e +# +# 0041concatenated_ranges_0 - Add, get, list, timeout for concatenated ranges +# +# Cycle over supported data types, forming concatenations of three fields, for +# all possible permutations, and: +# - add entries to set +# - list them +# - check that they can't be added again +# - get entries by specifying a value matching ranges for all fields +# - delete them +# - add them with 1s timeout +# - check that they can't be added again right away +# - check that they are not listed after 1s +# - delete them +# - make sure they can't be deleted again + +TYPES="ipv4_addr ipv6_addr ether_addr inet_proto inet_service mark" + +RULESPEC_ipv4_addr="ip saddr" +ELEMS_ipv4_addr="192.0.2.1 198.51.100.0/25 203.0.113.0-203.0.113.129" +ADD_ipv4_addr="192.0.2.252/31" +GET_ipv4_addr="198.51.100.127 198.51.100.0/25" + +RULESPEC_ipv6_addr="ip6 daddr" +ELEMS_ipv6_addr="2001:db8:c0c:c0de::1-2001:db8:cacc::a 2001:db8::1 2001:db8:dada:da::/64" +ADD_ipv6_addr="2001:db8::d1ca:d1ca" +GET_ipv6_addr="2001:db8::1 2001:db8::1" + +RULESPEC_ether_addr="ether saddr" +ELEMS_ether_addr="00:0a:c1:d1:f1:ed-00:0a:c1:dd:ec:af 00:0b:0c:ca:cc:10-c1:a0:c1:cc:10:00 f0:ca:cc:1a:b0:1a" +ADD_ether_addr="00:be:1d:ed:ab:e1" +GET_ether_addr="ac:c1:ac:c0:ce:c0 00:0b:0c:ca:cc:10-c1:a0:c1:cc:10:00" + +RULESPEC_inet_proto="meta l4proto" +ELEMS_inet_proto="tcp udp icmp" +ADD_inet_proto="sctp" +GET_inet_proto="udp udp" + +RULESPEC_inet_service="tcp dport" +ELEMS_inet_service="22-23 1024-32768 31337" +ADD_inet_service="32769-65535" +GET_inet_service="32768 1024-32768" + +RULESPEC_mark="mark" +ELEMS_mark="0x00000064-0x000000c8 0x0000006f 0x0000fffd-0x0000ffff" +ADD_mark="0x0000002a" +GET_mark="0x0000006f 0x0000006f" + +tmp="$(mktemp)" +trap "rm -f ${tmp}" EXIT + +render() { + eval "echo \"$(cat ${1})\"" +} + +cat <<'EOF' > "${tmp}" +flush ruleset + +table inet filter { + set test { + type ${ta} . ${tb} . ${tc} + flags interval,timeout + elements = { ${a1} . ${b1} . ${c1} , + ${a2} . ${b2} . ${c2} , + ${a3} . ${b3} . ${c3} } + } + + chain output { + type filter hook output priority 0; policy accept; + ${sa} . ${sb} . ${sc} @test counter + } +} +EOF + +for ta in ${TYPES}; do + eval a=\$ELEMS_${ta} + a1=${a%% *}; a2=$(expr "$a" : ".* \(.*\) .*"); a3=${a##* } + eval sa=\$RULESPEC_${ta} + + for tb in ${TYPES}; do + [ "${tb}" = "${ta}" ] && continue + if [ "${tb}" = "ipv6_addr" ]; then + [ "${ta}" = "ipv4_addr" ] && continue + elif [ "${tb}" = "ipv4_addr" ]; then + [ "${ta}" = "ipv6_addr" ] && continue + fi + + eval b=\$ELEMS_${tb} + b1=${b%% *}; b2=$(expr "$b" : ".* \(.*\) .*"); b3=${b##* } + eval sb=\$RULESPEC_${tb} + + for tc in ${TYPES}; do + [ "${tc}" = "${ta}" ] && continue + [ "${tc}" = "${tb}" ] && continue + if [ "${tc}" = "ipv6_addr" ]; then + [ "${ta}" = "ipv4_addr" ] && continue + [ "${tb}" = "ipv4_addr" ] && continue + elif [ "${tc}" = "ipv4_addr" ]; then + [ "${ta}" = "ipv6_addr" ] && continue + [ "${tb}" = "ipv6_addr" ] && continue + fi + + eval c=\$ELEMS_${tc} + c1=${c%% *}; c2=$(expr "$c" : ".* \(.*\) .*"); c3=${c##* } + eval sc=\$RULESPEC_${tc} + + render ${tmp} | ${NFT} -f - + + [ $(${NFT} list set inet filter test | \ + grep -c -e "${a1} . ${b1} . ${c1}" \ + -e "${a2} . ${b2} . ${c2}" \ + -e "${a3} . ${b3} . ${c3}") -eq 3 ] + + ! ${NFT} add element inet filter test \ + "{ ${a1} . ${b1} . ${c1} }" 2>/dev/null + ! ${NFT} add element inet filter test \ + "{ ${a2} . ${b2} . ${c2} }" 2>/dev/null + ! ${NFT} add element inet filter test \ + "{ ${a3} . ${b3} . ${c3} }" 2>/dev/null + + ${NFT} delete element inet filter test \ + "{ ${a1} . ${b1} . ${c1} }" + ! ${NFT} delete element inet filter test \ + "{ ${a1} . ${b1} . ${c1} }" 2>/dev/null + + eval add_a=\$ADD_${ta} + eval add_b=\$ADD_${tb} + eval add_c=\$ADD_${tc} + ${NFT} add element inet filter test \ + "{ ${add_a} . ${add_b} . ${add_c} timeout 1s}" + [ $(${NFT} list set inet filter test | \ + grep -c "${add_a} . ${add_b} . ${add_c}") -eq 1 ] + ! ${NFT} add element inet filter test \ + "{ ${add_a} . ${add_b} . ${add_c} timeout 1s}" \ + 2>/dev/null + + eval get_a=\$GET_${ta} + eval get_b=\$GET_${tb} + eval get_c=\$GET_${tc} + exp_a=${get_a##* }; get_a=${get_a%% *} + exp_b=${get_b##* }; get_b=${get_b%% *} + exp_c=${get_c##* }; get_c=${get_c%% *} + [ $(${NFT} get element inet filter test \ + "{ ${get_a} . ${get_b} . ${get_c} }" | \ + grep -c "${exp_a} . ${exp_b} . ${exp_c}") -eq 1 ] + + sleep 1 + [ $(${NFT} list set inet filter test | \ + grep -c "${add_a} . ${add_b} . ${add_c}") -eq 0 ] + + ${NFT} delete element inet filter test \ + "{ ${a2} . ${b2} . ${c2} }" + ${NFT} delete element inet filter test \ + "{ ${a3} . ${b3} . ${c3} }" + ! ${NFT} delete element inet filter test \ + "{ ${a2} . ${b2} . ${c2} }" 2>/dev/null + ! ${NFT} delete element inet filter test \ + "{ ${a3} . ${b3} . ${c3} }" 2>/dev/null + done + done +done
Signature · 1 line
2.20.1
Re: [PATCH nft v2 1/3] src: Add support for and export NFT_SET_SUBKEY attributes
In reply to Stefano BrivioQuoted 12 lines · Stefano Brivio
To support arbitrary range concatenations, the kernel needs to know how long each field in the concatenation is.
While evaluating concatenated expressions, export the datatype size, in bits, into the new
subkey_lenarray, and hand the data over via libnftnl.Note that, while the subkey length is expressed in bits, and the kernel attribute is 32-bit long to make UAPI more future-proof, we just reserve 8 bits for it, at the moment, and still store this data in bits.
Quoted 8 lines
As we don't have subkeys exceeding 128 bits in length, this should be fine, at least for a while, but it can be easily changed later on to use the full 32 bits allowed by the netlink attribute.
This change depends on the UAPI kernel patch with title:
netfilter:nf_tables: Support for subkeys, set with multiple ranged fieldsSigned-off-by Stefano Brivio <[email protected]>
Re: [PATCH nft v2 2/3] src: Add support for concatenated set ranges
In reply to Stefano BrivioQuoted 78 lines · Stefano Brivio
After exporting subkey (field) lengths via netlink attributes, we now need to adjust parsing of user input and generation of netlink key data to complete support for concatenation of set ranges.
The expression of concatenated ranges is described in the kernel counterpart for this change, quoted here:
--
In order to specify the interval for a set entry, userspace would simply keep using two elements per entry, as it happens now, with the end element indicating the upper interval bound. As a single element can now be a concatenation of several fields, with or without theNFT_SET_ELEM_INTERVAL_ENDflag, we obtain a convenient way to support multiple ranged fields in a set.[...]
For example, "packets with an IPv4 address between 192.0.2.0 and 192.0.2.42, with destination port between 22 and 25", can be expressed as two concatenated elements:
192.0.2.0 . 22
192.0.2.42 . 25 withNFT_SET_ELEM_INTERVAL_ENDand the
NFTA_SET_SUBKEYattributes would be 32, 16, in that order.Note that this does *not* represent the concatenated range:
0xc00x000x020x000x000x16-0xc00x000x020x2a0x000x25on the six packet bytes of interest. That is, the range specified does *not* include e.g.
0xc00x000x020x290x000x42, which is:
192.0.0.41 . 66
--To achieve this, we need to:
- adjust the lexer rules to allow multiton expressions as elements of a concatenation. As wildcards are not allowed (semantics would be ambiguous), exclude wildcards expressions from the set of possible multiton expressions, and allow them directly where needed. Concatenations now admit prefixes and ranges
- generate, for each concatenated range, two elements: one containing the start expressions, and one containing the end expressions for all fields in the concatenation
- also expand prefixes and non-ranged values in the concatenation to ranges: given a set with interval and subkey support, the kernel has no way to tell which elements are ranged, so they all need to be. So, for example, 192.0.2.0 . 192.0.2.9 : 1024 is sent as the two elements:
192.0.2.0 : 1024 192.0.2.9 : 1024 [end]- aggregate ranges when elements for
NFT_SET_SUBKEYsets are received by the kernel, seeconcat_range_aggregate()- perform a few minor adjustments where interval expressions are already handled: we have intervals in these sets, but the set specification isn't just an interval, so we can't just aggregate and deaggregate interval ranges linearly
v2:
- reworkednetlink_gen_concat_data(), moved loop body to a new function,netlink_gen_concat_data_expr()(Phil Sutter)
- dropped repeated pattern in bison file, replaced by a new helper,compound_expr_alloc_or_add()(Phil Sutter)
- addedset_is_nonconcat_range()helper (Phil Sutter)
- inexpr_evaluate_set(), we need to setNFT_SET_SUBKEYalso on empty sets where the set in the context already has the flag
- dropped additional 'end' parameter fromnetlink_gen_data(), temporarily setEXPR_F_INTERVAL_ENDon expressions and use that fromnetlink_gen_concat_data()to figure out we need to add the 'end' element (Phil Sutter)
- replacerange_mask_len()by a simplified version, as we don't need to actually store the composing masks of a range (Phil Sutter)
Quoted 1 line
Signed-off-by Stefano Brivio <[email protected]>
Re: [PATCH nft v2 3/3] tests: Introduce test for set with concatenated ranges
In reply to Stefano BrivioQuoted 11 lines · Stefano Brivio
This test checks that set elements can be added, deleted, that addition and deletion are refused when appropriate, that entries time out properly, and that they can be fetched by matching values in the given ranges.
v2:
- actually check an IPv6 prefix, instead of specifying everything as explicit ranges inELEMS_ipv6_addr
- renumber test to 0041, 0038 already existsSigned-off-by Stefano Brivio <[email protected]>