drm/tilcdc: Remove "ti, tilcdc, tfp410" and mark "ti, tilcdc, panel" obsolete
Subsystems (4)
cover drm/tilcdc: Remove "ti, tilcdc, tfp410" and mark "ti, tilcdc, panel" obsolete
Nobody should any more use the old tilcdc bundled drivers anymore. The driver is fully capable of using the generic drm bridge and panel drivers. However, the obsolete "ti,tilcdc,panel" binding is still widely used in many mainline supported platforms that I do not have access to and who knows how many custom platforms. So I am afraid we have to keep the old bundled tilcdc panel driver around.
Jyri Sarha (2):
drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver
dt-bindings: display: Add obsolete note to "ti,tilcdc,panel" binding
.../bindings/display/tilcdc/panel.txt | 6 + .../bindings/display/tilcdc/tfp410.txt | 21 - drivers/gpu/drm/tilcdc/Makefile | 1 - drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 - drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 379 ------------------ drivers/gpu/drm/tilcdc/tilcdc_tfp410.h | 15 - 6 files changed, 6 insertions(+), 419 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/tilcdc/tfp410.txt delete mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c delete mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.h
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/2 drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver
Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410" devicetree binding. No platform has ever used this driver in the mainline kernel and if anybody connects tfp410 to tilcdc he or she should use the generic drm tfp410 bridge driver.
--- .../bindings/display/tilcdc/tfp410.txt | 21 - drivers/gpu/drm/tilcdc/Makefile | 1 - drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 - drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 379 ------------------ drivers/gpu/drm/tilcdc/tilcdc_tfp410.h | 15 - 5 files changed, 419 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/tilcdc/tfp410.txt delete mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c delete mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.h
Documentation/devicetree/bindings/display/tilcdc/tfp410.txt deleted +0 -21
@@ -1,21 +0,0 @@ -Device-Tree bindings for tilcdc DRM TFP410 output driver - -Required properties: - - compatible: value should be "ti,tilcdc,tfp410". - - i2c: the phandle for the i2c device to use for DDC - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - - powerdn-gpio: the powerdown GPIO, pulled low to power down the - TFP410 device (for DPMS_OFF) - -Example: - - dvicape { - compatible = "ti,tilcdc,tfp410"; - i2c = <&i2c2>; - pinctrl-names = "default"; - pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; - powerdn-gpio = <&gpio2 31 0>; - };
drivers/gpu/drm/tilcdc/Makefile +0 -1
@@ -6,7 +6,6 @@ endif tilcdc-y := \ tilcdc_plane.o \ tilcdc_crtc.o \ - tilcdc_tfp410.o \ tilcdc_panel.o \ tilcdc_external.o \ tilcdc_drv.o
drivers/gpu/drm/tilcdc/tilcdc_drv.c +0 -3
@@ -30,7 +30,6 @@#include "tilcdc_external.h" #include "tilcdc_panel.h" #include "tilcdc_regs.h" -#include "tilcdc_tfp410.h" static LIST_HEAD (module_list);
@@ -649,7 +648,6 @@ static struct platform_driver tilcdc_platform_driver = {static int __init tilcdc_drm_init (void ) {DBG ("init" ); -tilcdc_tfp410_init ();tilcdc_panel_init ();return platform_driver_register (&tilcdc_platform_driver); }
@@ -659,7 +657,6 @@ static void __exit tilcdc_drm_fini(void)DBG ("fini" );platform_driver_unregister (&tilcdc_platform_driver);tilcdc_panel_fini (); -tilcdc_tfp410_fini (); }module_init (tilcdc_drm_init);
drivers/gpu/drm/tilcdc/tilcdc_tfp410.c deleted +0 -379
379 lines not on this page · raw message
drivers/gpu/drm/tilcdc/tilcdc_tfp410.h deleted +0 -15
@@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* -* Copyright (C) 2012 Texas Instruments -* Author: Rob Clark <[email protected]> -*/ - -#ifndef __TILCDC_TFP410_H__ -#define __TILCDC_TFP410_H__ - -/* sub-module for tfp410 dvi adaptor */ - -int tilcdc_tfp410_init (void ); -void tilcdc_tfp410_fini (void ); - -#endif /* __TILCDC_TFP410_H__ */
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/2] drm/tilcdc: Remove obsolete bundled tilcdc tfp410 driver
Hi Jyri,
Thank you for the patch.
Quoted 6 lines · Jyri Sarha
Remove obsolete bundled tfp410 driver with its "ti,tilcdc,tfp410" devicetree binding. No platform has ever used this driver in the mainline kernel and if anybody connects tfp410 to tilcdc he or she should use the generic drm tfp410 bridge driver.
Signed-off-by Jyri Sarha <[email protected]>
Quoted 484 lines
--- .../bindings/display/tilcdc/tfp410.txt | 21 - drivers/gpu/drm/tilcdc/Makefile | 1 - drivers/gpu/drm/tilcdc/tilcdc_drv.c | 3 - drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 379 ------------------ drivers/gpu/drm/tilcdc/tilcdc_tfp410.h | 15 - 5 files changed, 419 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/tilcdc/tfp410.txt delete mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c delete mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.hDocumentation/devicetree/bindings/display/tilcdc/tfp410.txt deleted +0
-21@@ -1,21 +0,0 @@ -Device-Tree bindings for tilcdc DRM TFP410 output driver - -Required properties: - - compatible: value should be "ti,tilcdc,tfp410". - - i2c: the phandle for the i2c device to use for DDC - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - - powerdn-gpio: the powerdown GPIO, pulled low to power down the - TFP410 device (for DPMS_OFF) - -Example: - - dvicape { - compatible = "ti,tilcdc,tfp410"; - i2c = <&i2c2>; - pinctrl-names = "default"; - pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; - powerdn-gpio = <&gpio2 31 0>; - };drivers/gpu/drm/tilcdc/Makefile +0
-1@@ -6,7 +6,6 @@ endif tilcdc-y := \ tilcdc_plane.o \ tilcdc_crtc.o \ - tilcdc_tfp410.o \ tilcdc_panel.o \ tilcdc_external.o \ tilcdc_drv.odrivers/gpu/drm/tilcdc/tilcdc_drv.c +0
-3@@ -30,7 +30,6 @@#include "tilcdc_external.h" #include "tilcdc_panel.h" #include "tilcdc_regs.h" -#include "tilcdc_tfp410.h" static LIST_HEAD (module_list);@@ -649,7 +648,6 @@ static struct platform_driver tilcdc_platform_driver = {static int __init tilcdc_drm_init (void ) {DBG ("init" ); -tilcdc_tfp410_init ();tilcdc_panel_init ();return platform_driver_register (&tilcdc_platform_driver); }@@ -659,7 +657,6 @@ static void __exit tilcdc_drm_fini(void)DBG ("fini" );platform_driver_unregister (&tilcdc_platform_driver);tilcdc_panel_fini (); -tilcdc_tfp410_fini (); }module_init (tilcdc_drm_init);drivers/gpu/drm/tilcdc/tilcdc_tfp410.c deleted +0
-379@@ -1,379 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* -* Copyright (C) 2012 Texas Instruments -* Author: Rob Clark <[email protected]> -*/ - -#include <linux/gpio.h> -#include <linux/mod_devicetable.h> -#include <linux/of_gpio.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_device.h> - -#include <drm/drm_atomic_helper.h> -#include <drm/drm_encoder.h> -#include <drm/drm_modeset_helper_vtables.h> -#include <drm/drm_probe_helper.h> - -#include "tilcdc_drv.h" -#include "tilcdc_tfp410.h" - -struct tfp410_module { -struct tilcdc_module base; -struct i2c_adapter *i2c; -int gpio; -}; -#define to_tfp410_module (x) container_of(x, struct tfp410_module, base) - - -static const struct tilcdc_panel_info dvi_info = { - .ac_bias =255 , - .ac_bias_intrpt =0 , - .dma_burst_sz =16 , - .bpp =16 , - .fdd =0x80 , - .tft_alt_mode =0 , - .sync_edge =0 , - .sync_ctrl =1 , - .raster_order =0 , -}; - -/* -* Encoder: -*/ - -struct tfp410_encoder { -struct drm_encoder base; -struct tfp410_module *mod; -int dpms; -}; -#define to_tfp410_encoder (x) container_of(x, struct tfp410_encoder, base) - -static void tfp410_encoder_dpms (struct drm_encoder *encoder,int mode) -{ -struct tfp410_encoder *tfp410_encoder =to_tfp410_encoder (encoder); - -if (tfp410_encoder->dpms == mode) -return ; - -if (mode ==DRM_MODE_DPMS_ON ) { -DBG ("Power on" ); -gpio_direction_output (tfp410_encoder->mod->gpio,1 ); - }else { -DBG ("Power off" ); -gpio_direction_output (tfp410_encoder->mod->gpio,0 ); - } - - tfp410_encoder->dpms = mode; -} - -static void tfp410_encoder_prepare (struct drm_encoder *encoder) -{ -tfp410_encoder_dpms (encoder,DRM_MODE_DPMS_OFF ); -} - -static void tfp410_encoder_commit (struct drm_encoder *encoder) -{ -tfp410_encoder_dpms (encoder,DRM_MODE_DPMS_ON ); -} - -static void tfp410_encoder_mode_set (struct drm_encoder *encoder, -struct drm_display_mode *mode, -struct drm_display_mode *adjusted_mode) -{ -/* nothing needed */ -} - -static const struct drm_encoder_funcs tfp410_encoder_funcs = { - .destroy = drm_encoder_cleanup, -}; - -static const struct drm_encoder_helper_funcs tfp410_encoder_helper_funcs = { - .dpms = tfp410_encoder_dpms, - .prepare = tfp410_encoder_prepare, - .commit = tfp410_encoder_commit, - .mode_set = tfp410_encoder_mode_set, -}; - -static struct drm_encoder *tfp410_encoder_create (struct drm_device *dev, -struct tfp410_module *mod) -{ -struct tfp410_encoder *tfp410_encoder; -struct drm_encoder *encoder; -int ret; - - tfp410_encoder =devm_kzalloc (dev->dev,sizeof (*tfp410_encoder), -GFP_KERNEL ); -if (!tfp410_encoder) -return NULL ; - - tfp410_encoder->dpms =DRM_MODE_DPMS_OFF ; - tfp410_encoder->mod = mod; - - encoder = &tfp410_encoder->base; - encoder->possible_crtcs =1 ; - - ret =drm_encoder_init (dev, encoder, &tfp410_encoder_funcs, -DRM_MODE_ENCODER_TMDS ,NULL ); -if (ret <0 ) - goto fail; - -drm_encoder_helper_add (encoder, &tfp410_encoder_helper_funcs); - -return encoder; - -fail: -drm_encoder_cleanup (encoder); -return NULL ; -} - -/* -* Connector: -*/ - -struct tfp410_connector { -struct drm_connector base; - -struct drm_encoder *encoder;/* our connected encoder */ -struct tfp410_module *mod; -}; -#define to_tfp410_connector (x) container_of(x, struct tfp410_connector, base) - - -static void tfp410_connector_destroy (struct drm_connector *connector) -{ -drm_connector_unregister (connector); -drm_connector_cleanup (connector); -} - -static enum drm_connector_status tfp410_connector_detect ( -struct drm_connector *connector, -bool force) -{ -struct tfp410_connector *tfp410_connector =to_tfp410_connector (connector); - -if (drm_probe_ddc (tfp410_connector->mod->i2c)) -return connector_status_connected; - -return connector_status_unknown; -} - -static int tfp410_connector_get_modes (struct drm_connector *connector) -{ -struct tfp410_connector *tfp410_connector =to_tfp410_connector (connector); -struct edid *edid; -int ret =0 ; - - edid =drm_get_edid (connector, tfp410_connector->mod->i2c); - -drm_connector_update_edid_property (connector, edid); - -if (edid) { - ret =drm_add_edid_modes (connector, edid); -kfree (edid); - } - -return ret; -} - -static struct drm_encoder *tfp410_connector_best_encoder ( -struct drm_connector *connector) -{ -struct tfp410_connector *tfp410_connector =to_tfp410_connector (connector); -return tfp410_connector->encoder; -} - -static const struct drm_connector_funcs tfp410_connector_funcs = { - .destroy = tfp410_connector_destroy, - .detect = tfp410_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .reset = drm_atomic_helper_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static const struct drm_connector_helper_funcs tfp410_connector_helper_funcs = { - .get_modes = tfp410_connector_get_modes, - .best_encoder = tfp410_connector_best_encoder, -}; - -static struct drm_connector *tfp410_connector_create (struct drm_device *dev, -struct tfp410_module *mod,struct drm_encoder *encoder) -{ -struct tfp410_connector *tfp410_connector; -struct drm_connector *connector; -int ret; - - tfp410_connector =devm_kzalloc (dev->dev,sizeof (*tfp410_connector), -GFP_KERNEL ); -if (!tfp410_connector) -return NULL ; - - tfp410_connector->encoder = encoder; - tfp410_connector->mod = mod; - - connector = &tfp410_connector->base; - -drm_connector_init (dev, connector, &tfp410_connector_funcs, -DRM_MODE_CONNECTOR_DVID ); -drm_connector_helper_add (connector, &tfp410_connector_helper_funcs); - - connector->polled =DRM_CONNECTOR_POLL_CONNECT | -DRM_CONNECTOR_POLL_DISCONNECT ; - - connector->interlace_allowed =0 ; - connector->doublescan_allowed =0 ; - - ret =drm_connector_attach_encoder (connector, encoder); -if (ret) - goto fail; - -return connector; - -fail: -tfp410_connector_destroy (connector); -return NULL ; -} - -/* -* Module: -*/ - -static int tfp410_modeset_init (struct tilcdc_module *mod,struct drm_device *dev) -{ -struct tfp410_module *tfp410_mod =to_tfp410_module (mod); -struct tilcdc_drm_private *priv = dev->dev_private; -struct drm_encoder *encoder; -struct drm_connector *connector; - - encoder =tfp410_encoder_create (dev, tfp410_mod); -if (!encoder) -return -ENOMEM ; - - connector =tfp410_connector_create (dev, tfp410_mod, encoder); -if (!connector) -return -ENOMEM ; - - priv->encoders[priv->num_encoders++] = encoder; - priv->connectors[priv->num_connectors++] = connector; - -tilcdc_crtc_set_panel_info (priv->crtc, &dvi_info); -return 0 ; -} - -static const struct tilcdc_module_ops tfp410_module_ops = { - .modeset_init = tfp410_modeset_init, -}; - -/* -* Device: -*/ - -static int tfp410_probe (struct platform_device *pdev) -{ -struct device_node *node = pdev->dev.of_node; -struct device_node *i2c_node; -struct tfp410_module *tfp410_mod; -struct tilcdc_module *mod; -struct pinctrl *pinctrl; -uint32_t i2c_phandle; -int ret = -EINVAL ; - -/* bail out early if no DT data: */ -if (!node) { -dev_err (&pdev->dev,"device-tree data is missing\n" ); -return -ENXIO ; - } - - tfp410_mod =devm_kzalloc (&pdev->dev,sizeof (*tfp410_mod),GFP_KERNEL ); -if (!tfp410_mod) -return -ENOMEM ; - - mod = &tfp410_mod->base; - pdev->dev.platform_data = mod; - -tilcdc_module_init (mod,"tfp410" , &tfp410_module_ops); - - pinctrl =devm_pinctrl_get_select_default (&pdev->dev); -if (IS_ERR (pinctrl)) -dev_warn (&pdev->dev,"pins are not configured\n" ); - -if (of_property_read_u32 (node,"i2c" , &i2c_phandle)) { -dev_err (&pdev->dev,"could not get i2c bus phandle\n" ); - goto fail; - } - - i2c_node =of_find_node_by_phandle (i2c_phandle); -if (!i2c_node) { -dev_err (&pdev->dev,"could not get i2c bus node\n" ); - goto fail; - } - - tfp410_mod->i2c =of_find_i2c_adapter_by_node (i2c_node); -if (!tfp410_mod->i2c) { -dev_err (&pdev->dev,"could not get i2c\n" ); -of_node_put (i2c_node); - goto fail; - } - -of_node_put (i2c_node); - - tfp410_mod->gpio =of_get_named_gpio_flags (node,"powerdn-gpio" , -0 ,NULL ); -if (tfp410_mod->gpio <0 ) { -dev_warn (&pdev->dev,"No power down GPIO\n" ); - }else { - ret =gpio_request (tfp410_mod->gpio,"DVI_PDn" ); -if (ret) { -dev_err (&pdev->dev,"could not get DVI_PDn gpio\n" ); - goto fail_adapter; - } - } - -return 0 ; - -fail_adapter: -i2c_put_adapter (tfp410_mod->i2c); - -fail: -tilcdc_module_cleanup (mod); -return ret; -} - -static int tfp410_remove (struct platform_device *pdev) -{ -struct tilcdc_module *mod =dev_get_platdata (&pdev->dev); -struct tfp410_module *tfp410_mod =to_tfp410_module (mod); - -i2c_put_adapter (tfp410_mod->i2c); -gpio_free (tfp410_mod->gpio); - -tilcdc_module_cleanup (mod); - -return 0 ; -} - -static const struct of_device_id tfp410_of_match[] = { - { .compatible ="ti,tilcdc,tfp410" , }, - { }, -}; - -struct platform_driver tfp410_driver = { - .probe = tfp410_probe, - .remove = tfp410_remove, - .driver = { - .owner =THIS_MODULE , - .name ="tfp410" , - .of_match_table = tfp410_of_match, - }, -}; - -int __init tilcdc_tfp410_init (void ) -{ -return platform_driver_register (&tfp410_driver); -} - -void __exit tilcdc_tfp410_fini(void) -{ -platform_driver_unregister (&tfp410_driver); -}drivers/gpu/drm/tilcdc/tilcdc_tfp410.h deleted +0
-15@@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* -* Copyright (C) 2012 Texas Instruments -* Author: Rob Clark <[email protected]> -*/ - -#ifndef __TILCDC_TFP410_H__ -#define __TILCDC_TFP410_H__ - -/* sub-module for tfp410 dvi adaptor */ - -int tilcdc_tfp410_init (void ); -void tilcdc_tfp410_fini (void ); - -#endif /* __TILCDC_TFP410_H__ */
Signature · 7 lines
Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/2 dt-bindings: display: Add obsolete note to "ti, tilcdc, panel" binding
In reply to Jyri SarhaThe "ti,tilcdc,panel" binding should not be used anymore, since tilcdc is fully capable of using generic drm panels like panel-simple and panel-common binding. However, the obsolete binding is still widely used in many mainline supported platforms that I do not have access to and who knows how many custom platforms. So I am afraid we have to keep the old bundled tilcdc panel driver around.
--- Documentation/devicetree/bindings/display/tilcdc/panel.txt | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/display/tilcdc/panel.txt +6 -0
@@ -1,5 +1,11 @@ Device-Tree bindings for tilcdc DRM generic panel output driver +NOTE: This binding (and the related driver) is obsolete and should not + be used anymore. Please refer to drm panel-common binding (and + to a generic drm panel driver like panel-simple). + Documentation/devicetree/bindings/display/panel/panel-common.yaml + (drivers/gpu/drm/panel/panel-simple.c) + Required properties: - compatible: value should be "ti,tilcdc,panel". - panel-info: configuration info to configure LCDC correctly for the panel
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] dt-bindings: display: Add obsolete note to "ti, tilcdc, panel" binding
Quoted 6 lines
Am 04.12.2019 um 18:53 schrieb Jyri Sarha <[email protected]>:
The "ti,tilcdc,panel" binding should not be used anymore, since tilcdc is fully capable of using generic drm panels like panel-simple and panel-common binding.
Is there an example how to convert?
As far as I can see all arch/arm/boot/dts/am335x-*.dts use "ti,tilcdc,panel"
arch/arm/boot/dts/am335x-evm.dts would IMHO be a good candidate.
Quoted 23 lines
However, the obsolete binding is still widely
used in many mainline supported platforms that I do not have access to and who knows how many custom platforms. So I am afraid we have to keep the old bundled tilcdc panel driver around.Signed-off-by Jyri Sarha <[email protected]>---
Documentation/devicetree/bindings/display/tilcdc/panel.txt| 6 ++++++1 file changed, 6 insertions(+)Documentation/devicetree/bindings/display/tilcdc/panel.txt +0
-0@@ -1,5 +1,11 @@Device-Tree bindings for tilcdc DRM generic panel output driver
Documentation/devicetree/bindings/display/tilcdc/panel.txt +6
-0+NOTE: This binding (and the related driver) is obsolete and should not + be used anymore. Please refer to drm panel-common binding (and + to a generic drm panel driver like panel-simple). + Documentation/devicetree/bindings/display/panel/panel-common.yaml + (drivers/gpu/drm/panel/panel-simple.c) +
Quoted 6 lines
Required properties:
- compatible: value should be "ti,tilcdc,panel".
- panel-info: configuration info to configure LCDC correctly for the panelSignature · 1 line
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] dt-bindings: display: Add obsolete note to "ti,tilcdc,panel" binding
Quoted 7 lines · H. Nikolaus Schaller
Quoted 6 lines
Am 04.12.2019 um 18:53 schrieb Jyri Sarha <[email protected]>:
The "ti,tilcdc,panel" binding should not be used anymore, since tilcdc is fully capable of using generic drm panels like panel-simple and panel-common binding.
Quoted 6 lines
Is there an example how to convert?
As far as I can see all
arch/arm/boot/dts/am335x-*.dtsuse "ti,tilcdc,panel"
arch/arm/boot/dts/am335x-evm.dtswould IMHO be a good candidate.
Yes, there is. Here are the patches to convert am335x-evm.dts and am335x-evmsk.dts:
https://lists.freedesktop.org/archives/dri-devel/2019-December/247301.html
https://lists.freedesktop.org/archives/dri-devel/2019-December/247594.html
I would have added a reference to the note, but since the patches are not yet queued to mainline, I decided against it.
The first thing to do before conversion is to check if panel-simple (or some other generic drm panel driver) already supports the used panel. If yes, then the conversion should be quite straight forwards. If not, then the first thing to do is to add support for the used panel into panel-simple.c.
Best regards,
Jyri
Quoted 30 lines
Quoted 29 lines
However, the obsolete binding is still widely
used in many mainline supported platforms that I do not have access to and who knows how many custom platforms. So I am afraid we have to keep the old bundled tilcdc panel driver around.Signed-off-by Jyri Sarha <[email protected]>---
Documentation/devicetree/bindings/display/tilcdc/panel.txt| 6 ++++++1 file changed, 6 insertions(+)Documentation/devicetree/bindings/display/tilcdc/panel.txt +0
-0@@ -1,5 +1,11 @@Device-Tree bindings for tilcdc DRM generic panel output driver
Documentation/devicetree/bindings/display/tilcdc/panel.txt +6
-0+NOTE: This binding (and the related driver) is obsolete and should not + be used anymore. Please refer to drm panel-common binding (and + to a generic drm panel driver like panel-simple). + Documentation/devicetree/bindings/display/panel/panel-common.yaml + (drivers/gpu/drm/panel/panel-simple.c) +Required properties:
- compatible: value should be "ti,tilcdc,panel".
- panel-info: configuration info to configure LCDC correctly for the panelSignature · 1 line
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] dt-bindings: display: Add obsolete note to "ti,tilcdc,panel" binding
In reply to Jyri SarhaHi Jyri,
Thank you for the patch.
Quoted 17 lines · Jyri Sarha
The "ti,tilcdc,panel" binding should not be used anymore, since tilcdc is fully capable of using generic drm panels like panel-simple and panel-common binding. However, the obsolete binding is still widely used in many mainline supported platforms that I do not have access to and who knows how many custom platforms. So I am afraid we have to keep the old bundled tilcdc panel driver around.
Signed-off-by Jyri Sarha <[email protected]>--- Documentation/devicetree/bindings/display/tilcdc/panel.txt | 6 ++++++ 1 file changed, 6 insertions(+)Documentation/devicetree/bindings/display/tilcdc/panel.txt +0
-0
Documentation/devicetree/bindings/display/tilcdc/panel.txt line 8
Quoted 8 lines
Documentation/devicetree/bindings/display/tilcdc/panel.txt +6
-0@@ -1,5 +1,11 @@ Device-Tree bindings for tilcdc DRM generic panel output driver +NOTE: This binding (and the related driver) is obsolete and should not + be used anymore. Please refer to drm panel-common binding (and + to a generic drm panel driver like panel-simple). + Documentation/devicetree/bindings/display/panel/panel-common.yaml + (drivers/gpu/drm/panel/panel-simple.c) +
How about adding a WARN_ON() in the code when this binding is used ? This could help getting those platforms converted.
Quoted 3 lines
Documentation/devicetree/bindings/display/tilcdc/panel.txt +0
-0Required properties: - compatible: value should be "ti,tilcdc,panel". - panel-info: configuration info to configure LCDC correctly for the panel
Signature · 7 lines
Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] dt-bindings: display: Add obsolete note to "ti,tilcdc,panel" binding
Quoted 24 lines · Laurent Pinchart
Hi Jyri,
Thank you for the patch.
Quoted 19 lines · Jyri Sarha
The "ti,tilcdc,panel" binding should not be used anymore, since tilcdc is fully capable of using generic drm panels like panel-simple and panel-common binding. However, the obsolete binding is still widely used in many mainline supported platforms that I do not have access to and who knows how many custom platforms. So I am afraid we have to keep the old bundled tilcdc panel driver around.
Signed-off-by Jyri Sarha <[email protected]>--- Documentation/devicetree/bindings/display/tilcdc/panel.txt | 6 ++++++ 1 file changed, 6 insertions(+)Documentation/devicetree/bindings/display/tilcdc/panel.txt +0
-0@@ -1,5 +1,11 @@ Device-Tree bindings for tilcdc DRM generic panel output driver
Quoted 10 lines
Documentation/devicetree/bindings/display/tilcdc/panel.txt line 8
Quoted 6 lines
Documentation/devicetree/bindings/display/tilcdc/panel.txt +6
-0+NOTE: This binding (and the related driver) is obsolete and should not + be used anymore. Please refer to drm panel-common binding (and + to a generic drm panel driver like panel-simple). + Documentation/devicetree/bindings/display/panel/panel-common.yaml + (drivers/gpu/drm/panel/panel-simple.c) +How about adding a
WARN_ON()in the code when this binding is used ? This could help getting those platforms converted.
I don't see why not, I'll add that.
Thanks
Jyro
Quoted 4 lines
Quoted 3 lines
Documentation/devicetree/bindings/display/tilcdc/panel.txt +0
-0Required properties: - compatible: value should be "ti,tilcdc,panel". - panel-info: configuration info to configure LCDC correctly for the panel
Signature · 6 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel