Skip to contentSkip to conversation

Introduce powerpc64 LE architecture support

PATCH New Khem Raj 1 participant 6 messages Jan 18, 2020 Arm/Amlogic Meson SoC support

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

cover Introduce powerpc64 LE architecture support

This patchset adds base support for building ppc64 in Litte-Endian mode, the linux-yocto changes and qemu related changes will make it buildable target out of box, but that is not yet made available

The following changes since commit ecbf203e34484731dcb6acc5e75df79cb86e55dc:

sstatesig: Improve debug output if getpwuid() fails (2020-01-16 22:33:09 +0000)

are available in the Git repository at:

git://git.yoctoproject.org/poky-contrib kraj/ppc64le
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=kraj/ppc64le

Khem Raj (5):
classes,conf,lib: Add support for powerpc64le
gcc: Enable 32bit powerpcle at multi-arch for powerpc64le
openssl: Add powerpc64 LE support
tcf-agent: Add LCL_STOP_SERVICES for powerpc64 LE
ghostscript: Add powerpc64 LE specific objarch.h

 meta/classes/libc-package.bbclass             |  1 +
 meta/classes/meson.bbclass                    |  2 +-
 meta/conf/bitbake.conf                        |  1 +
 meta/lib/oe/elf.py                            |  2 +
 meta/lib/oe/package_manager.py                |  1 +
 .../openssl/openssl_1.1.1d.bb                 |  3 ++
 meta/recipes-devtools/gcc/gcc-common.inc      |  1 +
 .../tcf-agent/tcf-agent_git.bb                |  1 +
 .../ghostscript/powerpc64le/objarch.h         | 40 +++++++++++++++++++
 9 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 meta/recipes-extended/ghostscript/ghostscript/powerpc64le/objarch.h
Signature · 1 line
2.25.0
author
#1 lore raw

PATCH 1/5 classes, conf, lib: Add support for powerpc64le

LE is default for modern powerpc64, power8+

PowerPC64 Little Endian Linux ABI specifies Power8 as the minimum ISA. The basic ABI can run on earlier versions of the 64 bit PowerPC ISA, but it was helpful to define a new, minimum instruction set for Linux distribution releases during the switch to Little Endian.

---
 meta/classes/libc-package.bbclass | 1 +
 meta/classes/meson.bbclass        | 2 +-
 meta/conf/bitbake.conf            | 1 +
 meta/lib/oe/elf.py                | 2 ++
 meta/lib/oe/package_manager.py    | 1 +
 5 files changed, 6 insertions(+), 1 deletion(-)
meta/classes/libc-package.bbclass +1 -0
index de816bcec1..de3b4250c7 100644
@@ -248,6 +248,7 @@ python package_do_split_gconvs () {
                 "sh4":     " --uint32-align=4 --big-endian ",    \
                 "powerpc": " --uint32-align=4 --big-endian ",    \
                 "powerpc64": " --uint32-align=4 --big-endian ",  \
+                "powerpc64le": " --uint32-align=4 --little-endian ",  \
                 "mips":    " --uint32-align=4 --big-endian ",    \
                 "mipsisa32r6":    " --uint32-align=4 --big-endian ",    \
                 "mips64":  " --uint32-align=4 --big-endian ",    \
meta/classes/meson.bbclass +1 -1
index 71f9de1a57..1ef34a999c 100644
@@ -45,7 +45,7 @@ def meson_cpu_family(var, d):
     arch = d.getVar(var)
     if arch == 'powerpc':
         return 'ppc'
-    elif arch == 'powerpc64':
+    elif arch == 'powerpc64' or arch == 'powerpc64le':
         return 'ppc64'
     elif arch == 'armeb':
         return 'arm'
meta/conf/bitbake.conf +1 -0
index 62b5466b71..3bbe42c2c0 100644
@@ -11,6 +11,7 @@ baselib = "${BASELIB}"
 baselib[vardepvalue] = "${baselib}"
 BASELIB = "lib"
 BASELIB_powerpc64 = "lib64"
+BASELIB_powerpc64le = "lib64"
 
 # Path prefixes
 export base_prefix = ""
meta/lib/oe/elf.py +2 -0
index 2562cea1dd..43c962c697 100644
@@ -34,6 +34,7 @@ def machine_dict(d):
                         "armeb":      (40,    97,    0,          False,         32),
                         "powerpc":    (20,     0,    0,          False,         32),
                         "powerpc64":  (21,     0,    0,          False,         64),
+                        "powerpc64le":  (21,     0,    0,          True,         64),
                         "i386":       ( 3,     0,    0,          True,          32),
                         "i486":       ( 3,     0,    0,          True,          32),
                         "i586":       ( 3,     0,    0,          True,          32),
@@ -68,6 +69,7 @@ def machine_dict(d):
                         "armeb":      (  40,    97,    0,          False,         32),
                         "powerpc":    (  20,     0,    0,          False,         32),
                         "powerpc64":  (  21,     0,    0,          False,         64),
+                        "powerpc64le":  (21,     0,    0,          True,         64),
                         "i386":       (   3,     0,    0,          True,          32),
                         "i486":       (   3,     0,    0,          True,          32),
                         "i586":       (   3,     0,    0,          True,          32),
meta/lib/oe/package_manager.py +1 -0
index e15e3c4a31..e96c28b46d 100644
@@ -107,6 +107,7 @@ def generate_locale_archive(d, rootfs, target_arch, localedir):
         "sh4": ["--uint32-align=4", "--big-endian"],
         "powerpc": ["--uint32-align=4", "--big-endian"],
         "powerpc64": ["--uint32-align=4", "--big-endian"],
+        "powerpc64le": ["--uint32-align=4", "--little-endian"],
         "mips": ["--uint32-align=4", "--big-endian"],
         "mipsisa32r6": ["--uint32-align=4", "--big-endian"],
         "mips64": ["--uint32-align=4", "--big-endian"],
Signature · 1 line
2.25.0
author
#2 lore raw

PATCH 2/5 gcc: Enable 32bit powerpcle at multi-arch for powerpc64le

In reply to Khem Raj

Even though we do not expect any legacy ( 32bit ) for LE, linux-yocto does enable the compat code, so enable 32bit support to get that going

---
 meta/recipes-devtools/gcc/gcc-common.inc | 1 +
 1 file changed, 1 insertion(+)
meta/recipes-devtools/gcc/gcc-common.inc +1 -0
index 44cba287f3..3dcfdf835f 100644
@@ -47,6 +47,7 @@ def get_gcc_multiarch_setting(bb, d):
         "i586":    "--enable-targets=all",
         "i686":    "--enable-targets=all",
         "powerpc": "--enable-targets=powerpc64",
+        "powerpc64le": "--enable-targets=powerpcle",
         "mips":    "--enable-targets=all",
         "sparc":   "--enable-targets=all",
     }
Signature · 1 line
2.25.0
author
#3 lore raw

PATCH 3/5 openssl: Add powerpc64 LE support

In reply to Khem Raj
---
 meta/recipes-connectivity/openssl/openssl_1.1.1d.bb | 3 +++
 1 file changed, 3 insertions(+)
meta/recipes-connectivity/openssl/openssl_1.1.1d.bb +3 -0
index 458ae7daf4..7fd0f9a269 100644
@@ -102,6 +102,9 @@ do_configure () {
 	linux-powerpc64)
 		target=linux-ppc64
 		;;
+	linux-powerpc64le)
+		target=linux-ppc64le
+		;;
 	linux-riscv32)
 		target=linux-generic32
 		;;
Signature · 1 line
2.25.0
author
#4 lore raw

PATCH 4/5 tcf-agent: Add LCL_STOP_SERVICES for powerpc64 LE

In reply to Khem Raj

This is same as PPC64 BE

---
 meta/recipes-devtools/tcf-agent/tcf-agent_git.bb | 1 +
 1 file changed, 1 insertion(+)
meta/recipes-devtools/tcf-agent/tcf-agent_git.bb +1 -0
index b4bd4ca63c..e0a07a9375 100644
@@ -46,6 +46,7 @@ CFLAGS_append_mips = " ${LCL_STOP_SERVICES}"
 CFLAGS_append_mips64 = " ${LCL_STOP_SERVICES}"
 CFLAGS_append_libc-musl = " ${LCL_STOP_SERVICES}"
 CFLAGS_append_powerpc64 = " ${LCL_STOP_SERVICES}"
+CFLAGS_append_powerpc64le = " ${LCL_STOP_SERVICES}"
 CFLAGS_append_riscv64 = " ${LCL_STOP_SERVICES}"
 
 do_install() {
Signature · 1 line
2.25.0
author
#5 lore raw

PATCH 5/5 ghostscript: Add powerpc64 LE specific objarch.h

In reply to Khem Raj
---
 .../ghostscript/powerpc64le/objarch.h         | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 meta/recipes-extended/ghostscript/ghostscript/powerpc64le/objarch.h
meta/recipes-extended/ghostscript/ghostscript/powerpc64le/objarch.h new file +40 -0
new file mode 100644
index 0000000000..a05de29def
@@ -0,0 +1,40 @@
+/* Parameters derived from machine and compiler architecture. */
+/* This file is generated mechanically by genarch.c. */
+
+	 /* ---------------- Scalar alignments ---------------- */
+
+#define ARCH_ALIGN_SHORT_MOD 2
+#define ARCH_ALIGN_INT_MOD 4
+#define ARCH_ALIGN_LONG_MOD 8
+#define ARCH_ALIGN_PTR_MOD 8
+#define ARCH_ALIGN_FLOAT_MOD 4
+#define ARCH_ALIGN_DOUBLE_MOD 8
+
+	 /* ---------------- Scalar sizes ---------------- */
+
+#define ARCH_LOG2_SIZEOF_CHAR 0
+#define ARCH_LOG2_SIZEOF_SHORT 1
+#define ARCH_LOG2_SIZEOF_INT 2
+#define ARCH_LOG2_SIZEOF_LONG 3
+#define ARCH_LOG2_SIZEOF_LONG_LONG 3
+#define ARCH_SIZEOF_GX_COLOR_INDEX 8
+#define ARCH_SIZEOF_PTR 8
+#define ARCH_SIZEOF_FLOAT 4
+#define ARCH_SIZEOF_DOUBLE 8
+#define ARCH_FLOAT_MANTISSA_BITS 24
+#define ARCH_DOUBLE_MANTISSA_BITS 53
+
+	 /* ---------------- Unsigned max values ---------------- */
+
+#define ARCH_MAX_UCHAR ((unsigned char)0xff + (unsigned char)0)
+#define ARCH_MAX_USHORT ((unsigned short)0xffff + (unsigned short)0)
+#define ARCH_MAX_UINT ((unsigned int)~0 + (unsigned int)0)
+#define ARCH_MAX_ULONG ((unsigned long)~0L + (unsigned long)0)
+
+	 /* ---------------- Miscellaneous ---------------- */
+
+#define ARCH_IS_BIG_ENDIAN 0
+#define ARCH_PTRS_ARE_SIGNED 0
+#define ARCH_FLOATS_ARE_IEEE 1
+#define ARCH_ARITH_RSHIFT 2
+#define ARCH_DIV_NEG_POS_TRUNCATES 1
Signature · 1 line
2.25.0