iio: vncl4000: Enable runtime pm for vcnl4200/4040
v2 cover iio: vncl4000: Enable runtime pm for vcnl4200/4040
This is modelled after the vcnl4035 driver. For the vcnl40{0,1,2}0 we don't do anything since they use on demand measurement.
Patch is against next-20200130.
Changes from v2
---------------
- Based on review feedback Tomas Novotny
https://lore.kernel.org/linux-iio/[email protected]/
Drop long wait in vcnl4000_runtime_resume but rather use vcnl4200_{al,ps}.last_measurement to make sure we wait long enough.
Guido Günther (2):
iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
iio: vncl4000: Enable runtime pm for vcnl4200/4040
drivers/iio/light/vcnl4000.c | 150 ++++++++++++++++++++++++++++++----- 1 file changed, 132 insertions(+), 18 deletions(-)
Signature · 1 line
2.23.0
PATCH v2 1/2 iio: vcnl4000: Use a single return when getting IIO_CHAN_INFO_RAW
This will be useful when introducing runtime pm.
--- drivers/iio/light/vcnl4000.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/iio/light/vcnl4000.c +8 -7
@@ -335,17 +335,18 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,switch (chan->type) {case IIO_LIGHT : ret = data->chip_spec->measure_light (data, val); -if (ret <0 ) -return ret; -return IIO_VAL_INT ; +if (!ret) + ret =IIO_VAL_INT ; +break ;case IIO_PROXIMITY : ret = data->chip_spec->measure_proximity (data, val); -if (ret <0 ) -return ret; -return IIO_VAL_INT ; +if (!ret) + ret =IIO_VAL_INT ; +break ;default : -return -EINVAL ; + ret = -EINVAL ; } +return ret;case IIO_CHAN_INFO_SCALE :if (chan->type !=IIO_LIGHT )return -EINVAL ;
Signature · 1 line
2.23.0
PATCH v2 2/2 iio: vncl4000: Enable runtime pm for vcnl4200/4040
In reply to Guido GüntherThis is modelled after the vcnl4035 driver. For the vcnl40{0,1,2}0 we don't do anything since they use on demand measurement.
--- drivers/iio/light/vcnl4000.c | 135 ++++++++++++++++++++++++++++++++--- 1 file changed, 124 insertions(+), 11 deletions(-)
drivers/iio/light/vcnl4000.c +124 -11
@@ -22,6 +22,7 @@#include <linux/i2c.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/pm_runtime.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h>
@@ -57,6 +58,8 @@#define VCNL4000_AL_OD BIT(4)/* start on-demand ALS measurement */ #define VCNL4000_PS_OD BIT(3)/* start on-demand proximity measurement */ +#define VCNL4000_SLEEP_DELAY_MS 2000/* before we enter pm_runtime_suspend */ +enum vcnl4000_device_ids {VCNL4000 ,VCNL4010 ,
@@ -87,6 +90,7 @@ struct vcnl4000_chip_spec {int (*init)(struct vcnl4000_data *data);int (*measure_light)(struct vcnl4000_data *data,int *val);int (*measure_proximity)(struct vcnl4000_data *data,int *val); +int (*set_power_state)(struct vcnl4000_data *data,bool on); };static const struct i2c_device_id vcnl4000_id[] = {
@@ -99,6 +103,12 @@ static const struct i2c_device_id vcnl4000_id[] = { };MODULE_DEVICE_TABLE (i2c, vcnl4000_id); +static int vcnl4000_set_power_state (struct vcnl4000_data *data,bool on) +{ +/* no suspend op */ +return 0 ; +} +static int vcnl4000_init (struct vcnl4000_data *data) {int ret, prod_id;
@@ -127,9 +137,31 @@ static int vcnl4000_init(struct vcnl4000_data *data) data->al_scale =250000 ;mutex_init (&data->vcnl4000_lock); + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; +return 0 ; }; +static int vcnl4200_set_power_state (struct vcnl4000_data *data,bool on) +{ +u16 val = on ?0 /* power on */ :1 /* shut down */ ; +int ret; + + ret =i2c_smbus_write_word_data (data->client,VCNL4200_AL_CONF , val); +if (ret <0 ) +return ret; + +return i2c_smbus_write_word_data (data->client,VCNL4200_PS_CONF1 , val); +if (ret <0 ) +return ret; + +/* Wait at least one integration cycle before fetching data */ + data->vcnl4200_al.last_measurement =ktime_get (); + data->vcnl4200_ps.last_measurement =ktime_get (); +} +static int vcnl4200_init (struct vcnl4000_data *data) {int ret, id;
@@ -155,14 +187,6 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->rev = (ret >>8 ) &0xf ; -/* Set defaults and enable both channels */ - ret =i2c_smbus_write_word_data (data->client,VCNL4200_AL_CONF ,0 ); -if (ret <0 ) -return ret; - ret =i2c_smbus_write_word_data (data->client,VCNL4200_PS_CONF1 ,0 ); -if (ret <0 ) -return ret; - data->vcnl4200_al.reg =VCNL4200_AL_DATA ; data->vcnl4200_ps.reg =VCNL4200_PS_DATA ;switch (id) {
@@ -180,11 +204,13 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->al_scale =120000 ;break ; } - data->vcnl4200_al.last_measurement =ktime_set (0 ,0 ); - data->vcnl4200_ps.last_measurement =ktime_set (0 ,0 );mutex_init (&data->vcnl4200_al.lock);mutex_init (&data->vcnl4200_ps.lock); + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; +return 0 ; };
@@ -291,24 +317,28 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .init = vcnl4000_init, .measure_light = vcnl4000_measure_light, .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, }, [VCNL4010] = { .prod = "VCNL4010/4020", .init = vcnl4000_init, .measure_light = vcnl4000_measure_light, .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, }, [VCNL4040] = { .prod = "VCNL4040", .init = vcnl4200_init, .measure_light = vcnl4200_measure_light, .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, }, [VCNL4200] = { .prod = "VCNL4200", .init = vcnl4200_init, .measure_light = vcnl4200_measure_light, .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, }, };
@@ -323,6 +353,23 @@ static const struct iio_chan_spec vcnl4000_channels[] = { } }; +static int vcnl4000_set_pm_runtime_state (struct vcnl4000_data *data,bool on) +{ +struct device *dev = &data->client->dev; +int ret; + +if (on) { + ret =pm_runtime_get_sync (dev); +if (ret <0 ) +pm_runtime_put_noidle (dev); + }else { +pm_runtime_mark_last_busy (dev); + ret =pm_runtime_put_autosuspend (dev); + } + +return ret; +} +static int vcnl4000_read_raw (struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int *val,int *val2,long mask)
@@ -332,6 +379,10 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,switch (mask) {case IIO_CHAN_INFO_RAW : + ret =vcnl4000_set_pm_runtime_state (data, true); +if (ret <0 ) +return ret; +switch (chan->type) {case IIO_LIGHT : ret = data->chip_spec->measure_light (data, val);
@@ -346,6 +397,7 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,default : ret = -EINVAL ; } +vcnl4000_set_pm_runtime_state (data, false);return ret;case IIO_CHAN_INFO_SCALE :if (chan->type !=IIO_LIGHT )
@@ -394,7 +446,22 @@ static int vcnl4000_probe(struct i2c_client *client, indio_dev->name =VCNL4000_DRV_NAME ; indio_dev->modes =INDIO_DIRECT_MODE ; -return devm_iio_device_register (&client->dev, indio_dev); + ret =pm_runtime_set_active (&client->dev); +if (ret <0 ) + goto fail_poweroff; + + ret =iio_device_register (indio_dev); +if (ret <0 ) + goto fail_poweroff; + +pm_runtime_enable (&client->dev); +pm_runtime_set_autosuspend_delay (&client->dev,VCNL4000_SLEEP_DELAY_MS ); +pm_runtime_use_autosuspend (&client->dev); + +return 0 ; +fail_poweroff: + data->chip_spec->set_power_state (data, false); +return ret; }static const struct of_device_id vcnl_4000_of_match[] = {
@@ -422,13 +489,59 @@ static const struct of_device_id vcnl_4000_of_match[] = { };MODULE_DEVICE_TABLE (of, vcnl_4000_of_match); +static int vcnl4000_remove (struct i2c_client *client) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (client); +struct vcnl4000_data *data =iio_priv (indio_dev); + +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); +iio_device_unregister (indio_dev); +pm_runtime_set_suspended (&client->dev); + +return data->chip_spec->set_power_state (data, false); +} + +static int __maybe_unused vcnl4000_runtime_suspend (struct device *dev) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); +struct vcnl4000_data *data =iio_priv (indio_dev); +int ret; + + ret = data->chip_spec->set_power_state (data, false); + +return ret; +} + +static int __maybe_unused vcnl4000_runtime_resume (struct device *dev) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); +struct vcnl4000_data *data =iio_priv (indio_dev); +int ret; + + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; + +return 0 ; +} + +static const struct dev_pm_ops vcnl4000_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +SET_RUNTIME_PM_OPS (vcnl4000_runtime_suspend, + vcnl4000_runtime_resume,NULL ) +}; +static struct i2c_driver vcnl4000_driver = { .driver = { .name =VCNL4000_DRV_NAME , + .pm = &vcnl4000_pm_ops, .of_match_table = vcnl_4000_of_match, }, .probe = vcnl4000_probe, .id_table = vcnl4000_id, + .remove = vcnl4000_remove, };module_i2c_driver (vcnl4000_driver);
Signature · 1 line
2.23.0
Jonathan Cameron
maintainerQuoted 4 lines · On Thu, 30 Jan 2020 14:42:36 +0100 Guido Günther <[email protected]> wrote:
This is modelled after the vcnl4035 driver. For the vcnl40{0,1,2}0 we don't do anything since they use on demand measurement.
Signed-off-by Guido Günther <[email protected]>
Hi Guido,
A few minor things inline, but otherwise looks good to me.
Thanks,
Jonathan
Quoted 63 lines
--- drivers/iio/light/vcnl4000.c | 135 ++++++++++++++++++++++++++++++++--- 1 file changed, 124 insertions(+), 11 deletions(-)drivers/iio/light/vcnl4000.c +20
-0@@ -22,6 +22,7 @@#include <linux/i2c.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/pm_runtime.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -57,6 +58,8 @@#define VCNL4000_AL_OD BIT(4)/* start on-demand ALS measurement */ #define VCNL4000_PS_OD BIT(3)/* start on-demand proximity measurement */ +#define VCNL4000_SLEEP_DELAY_MS 2000/* before we enter pm_runtime_suspend */ +enum vcnl4000_device_ids {VCNL4000 ,VCNL4010 ,@@ -87,6 +90,7 @@ struct vcnl4000_chip_spec {int (*init)(struct vcnl4000_data *data);int (*measure_light)(struct vcnl4000_data *data,int *val);int (*measure_proximity)(struct vcnl4000_data *data,int *val); +int (*set_power_state)(struct vcnl4000_data *data,bool on); };static const struct i2c_device_id vcnl4000_id[] = {@@ -99,6 +103,12 @@ static const struct i2c_device_id vcnl4000_id[] = { };MODULE_DEVICE_TABLE (i2c, vcnl4000_id); +static int vcnl4000_set_power_state (struct vcnl4000_data *data,bool on) +{ +/* no suspend op */ +return 0 ; +} +static int vcnl4000_init (struct vcnl4000_data *data) {int ret, prod_id;@@ -127,9 +137,31 @@ static int vcnl4000_init(struct vcnl4000_data *data) data->al_scale =250000 ;mutex_init (&data->vcnl4000_lock); + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; +return 0 ; }; +static int vcnl4200_set_power_state (struct vcnl4000_data *data,bool on) +{ +u16 val = on ?0 /* power on */ :1 /* shut down */ ; +int ret; + + ret =i2c_smbus_write_word_data (data->client,VCNL4200_AL_CONF , val);
drivers/iio/light/vcnl4000.c static int vcnl4000_init(struct vcnl4000_data *data) · line 162
Quoted 10 lines
drivers/iio/light/vcnl4000.c +10
-0+if (ret <0 ) +return ret; + +return i2c_smbus_write_word_data (data->client,VCNL4200_PS_CONF1 , val); +if (ret <0 ) +return ret; + +/* Wait at least one integration cycle before fetching data */ + data->vcnl4200_al.last_measurement =ktime_get (); + data->vcnl4200_ps.last_measurement =ktime_get ();
Hmm. Feels like these only really make sense if we are turning on? They may do no harm in the off path, but better if the code makes it clear they are irrelevant in that path.
No return value.
i.e. return 0;
Quoted 148 lines
drivers/iio/light/vcnl4000.c +60
-11+} +static int vcnl4200_init (struct vcnl4000_data *data) {int ret, id;@@ -155,14 +187,6 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->rev = (ret >>8 ) &0xf ; -/* Set defaults and enable both channels */ - ret =i2c_smbus_write_word_data (data->client,VCNL4200_AL_CONF ,0 ); -if (ret <0 ) -return ret; - ret =i2c_smbus_write_word_data (data->client,VCNL4200_PS_CONF1 ,0 ); -if (ret <0 ) -return ret; - data->vcnl4200_al.reg =VCNL4200_AL_DATA ; data->vcnl4200_ps.reg =VCNL4200_PS_DATA ;switch (id) {@@ -180,11 +204,13 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->al_scale =120000 ;break ; } - data->vcnl4200_al.last_measurement =ktime_set (0 ,0 ); - data->vcnl4200_ps.last_measurement =ktime_set (0 ,0 );mutex_init (&data->vcnl4200_al.lock);mutex_init (&data->vcnl4200_ps.lock); + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; +return 0 ; };@@ -291,24 +317,28 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .init = vcnl4000_init, .measure_light = vcnl4000_measure_light, .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, }, [VCNL4010] = { .prod = "VCNL4010/4020", .init = vcnl4000_init, .measure_light = vcnl4000_measure_light, .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, }, [VCNL4040] = { .prod = "VCNL4040", .init = vcnl4200_init, .measure_light = vcnl4200_measure_light, .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, }, [VCNL4200] = { .prod = "VCNL4200", .init = vcnl4200_init, .measure_light = vcnl4200_measure_light, .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, }, };@@ -323,6 +353,23 @@ static const struct iio_chan_spec vcnl4000_channels[] = { } }; +static int vcnl4000_set_pm_runtime_state (struct vcnl4000_data *data,bool on) +{ +struct device *dev = &data->client->dev; +int ret; + +if (on) { + ret =pm_runtime_get_sync (dev); +if (ret <0 ) +pm_runtime_put_noidle (dev); + }else { +pm_runtime_mark_last_busy (dev); + ret =pm_runtime_put_autosuspend (dev); + } + +return ret; +} +static int vcnl4000_read_raw (struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int *val,int *val2,long mask)@@ -332,6 +379,10 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,switch (mask) {case IIO_CHAN_INFO_RAW : + ret =vcnl4000_set_pm_runtime_state (data, true); +if (ret <0 ) +return ret; +switch (chan->type) {case IIO_LIGHT : ret = data->chip_spec->measure_light (data, val);@@ -346,6 +397,7 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,default : ret = -EINVAL ; } +vcnl4000_set_pm_runtime_state (data, false);return ret;case IIO_CHAN_INFO_SCALE :if (chan->type !=IIO_LIGHT )@@ -394,7 +446,22 @@ static int vcnl4000_probe(struct i2c_client *client, indio_dev->name =VCNL4000_DRV_NAME ; indio_dev->modes =INDIO_DIRECT_MODE ; -return devm_iio_device_register (&client->dev, indio_dev); + ret =pm_runtime_set_active (&client->dev); +if (ret <0 ) + goto fail_poweroff; + + ret =iio_device_register (indio_dev); +if (ret <0 ) + goto fail_poweroff; + +pm_runtime_enable (&client->dev); +pm_runtime_set_autosuspend_delay (&client->dev,VCNL4000_SLEEP_DELAY_MS ); +pm_runtime_use_autosuspend (&client->dev); + +return 0 ; +fail_poweroff: + data->chip_spec->set_power_state (data, false); +return ret; }static const struct of_device_id vcnl_4000_of_match[] = {@@ -422,13 +489,59 @@ static const struct of_device_id vcnl_4000_of_match[] = { };MODULE_DEVICE_TABLE (of, vcnl_4000_of_match); +static int vcnl4000_remove (struct i2c_client *client) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (client); +struct vcnl4000_data *data =iio_priv (indio_dev); + +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); +iio_device_unregister (indio_dev); +pm_runtime_set_suspended (&client->dev); + +return data->chip_spec->set_power_state (data, false); +}
drivers/iio/light/vcnl4000.c static const struct of_device_id vcnl_4000_of_match[] = { · line 513
Quoted 10 lines
drivers/iio/light/vcnl4000.c +10
-0+ +static int __maybe_unused vcnl4000_runtime_suspend (struct device *dev) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); +struct vcnl4000_data *data =iio_priv (indio_dev); +int ret; + + ret = data->chip_spec->set_power_state (data, false); + +return ret;
return data->chip_spec...
drivers/iio/light/vcnl4000.c static const struct of_device_id vcnl_4000_of_match[] = { · line 524
Quoted 11 lines
drivers/iio/light/vcnl4000.c +11
-0+} + +static int __maybe_unused vcnl4000_runtime_resume (struct device *dev) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); +struct vcnl4000_data *data =iio_priv (indio_dev); +int ret; + + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret;
I would define the set_power_state callback to return only < 0 for error and 0 for no error. (already true).
then
return data->chip_spec->set_power_state(data, true);
Quoted 23 lines
drivers/iio/light/vcnl4000.c +13
-0+ +return 0 ; +} + +static const struct dev_pm_ops vcnl4000_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +SET_RUNTIME_PM_OPS (vcnl4000_runtime_suspend, + vcnl4000_runtime_resume,NULL ) +}; +static struct i2c_driver vcnl4000_driver = { .driver = { .name =VCNL4000_DRV_NAME , + .pm = &vcnl4000_pm_ops, .of_match_table = vcnl_4000_of_match, }, .probe = vcnl4000_probe, .id_table = vcnl4000_id, + .remove = vcnl4000_remove, };module_i2c_driver (vcnl4000_driver);
Hi Jonathan,
Quoted 84 lines · Jonathan Cameron
Quoted 4 lines · On Thu, 30 Jan 2020 14:42:36 +0100 Guido Günther <[email protected]> wrote:
This is modelled after the vcnl4035 driver. For the vcnl40{0,1,2}0 we don't do anything since they use on demand measurement.
Signed-off-by Guido Günther <[email protected]>Hi Guido,
A few minor things inline, but otherwise looks good to me.
Thanks,
Jonathan
Quoted 69 lines
--- drivers/iio/light/vcnl4000.c | 135 ++++++++++++++++++++++++++++++++--- 1 file changed, 124 insertions(+), 11 deletions(-)drivers/iio/light/vcnl4000.c +26
-0@@ -22,6 +22,7 @@#include <linux/i2c.h> #include <linux/err.h> #include <linux/delay.h> +#include <linux/pm_runtime.h> #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> @@ -57,6 +58,8 @@#define VCNL4000_AL_OD BIT(4)/* start on-demand ALS measurement */ #define VCNL4000_PS_OD BIT(3)/* start on-demand proximity measurement */ +#define VCNL4000_SLEEP_DELAY_MS 2000/* before we enter pm_runtime_suspend */ +enum vcnl4000_device_ids {VCNL4000 ,VCNL4010 ,@@ -87,6 +90,7 @@ struct vcnl4000_chip_spec {int (*init)(struct vcnl4000_data *data);int (*measure_light)(struct vcnl4000_data *data,int *val);int (*measure_proximity)(struct vcnl4000_data *data,int *val); +int (*set_power_state)(struct vcnl4000_data *data,bool on); };static const struct i2c_device_id vcnl4000_id[] = {@@ -99,6 +103,12 @@ static const struct i2c_device_id vcnl4000_id[] = { };MODULE_DEVICE_TABLE (i2c, vcnl4000_id); +static int vcnl4000_set_power_state (struct vcnl4000_data *data,bool on) +{ +/* no suspend op */ +return 0 ; +} +static int vcnl4000_init (struct vcnl4000_data *data) {int ret, prod_id;@@ -127,9 +137,31 @@ static int vcnl4000_init(struct vcnl4000_data *data) data->al_scale =250000 ;mutex_init (&data->vcnl4000_lock); + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; +return 0 ; }; +static int vcnl4200_set_power_state (struct vcnl4000_data *data,bool on) +{ +u16 val = on ?0 /* power on */ :1 /* shut down */ ; +int ret; + + ret =i2c_smbus_write_word_data (data->client,VCNL4200_AL_CONF , val); +if (ret <0 ) +return ret; + +return i2c_smbus_write_word_data (data->client,VCNL4200_PS_CONF1 , val); +if (ret <0 ) +return ret;
Quoted 8 lines
drivers/iio/light/vcnl4000.c static int vcnl4000_init(struct vcnl4000_data *data) · line 162
Quoted 4 lines
drivers/iio/light/vcnl4000.c +4
-0+ +/* Wait at least one integration cycle before fetching data */ + data->vcnl4200_al.last_measurement =ktime_get (); + data->vcnl4200_ps.last_measurement =ktime_get ();Hmm. Feels like these only really make sense if we are turning on? They may do no harm in the off path, but better if the code makes it clear they are irrelevant in that path.
You're right, it doesn't matter in the off path but it's clearer when only doing it in the 'on' path.
Quoted 1 line
No return value.
Duh, wonder why gcc didn't warn about that.
Quoted 178 lines
i.e. return 0;
Quoted 148 lines
drivers/iio/light/vcnl4000.c +60
-11+} +static int vcnl4200_init (struct vcnl4000_data *data) {int ret, id;@@ -155,14 +187,6 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->rev = (ret >>8 ) &0xf ; -/* Set defaults and enable both channels */ - ret =i2c_smbus_write_word_data (data->client,VCNL4200_AL_CONF ,0 ); -if (ret <0 ) -return ret; - ret =i2c_smbus_write_word_data (data->client,VCNL4200_PS_CONF1 ,0 ); -if (ret <0 ) -return ret; - data->vcnl4200_al.reg =VCNL4200_AL_DATA ; data->vcnl4200_ps.reg =VCNL4200_PS_DATA ;switch (id) {@@ -180,11 +204,13 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->al_scale =120000 ;break ; } - data->vcnl4200_al.last_measurement =ktime_set (0 ,0 ); - data->vcnl4200_ps.last_measurement =ktime_set (0 ,0 );mutex_init (&data->vcnl4200_al.lock);mutex_init (&data->vcnl4200_ps.lock); + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret; +return 0 ; };@@ -291,24 +317,28 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = { .init = vcnl4000_init, .measure_light = vcnl4000_measure_light, .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, }, [VCNL4010] = { .prod = "VCNL4010/4020", .init = vcnl4000_init, .measure_light = vcnl4000_measure_light, .measure_proximity = vcnl4000_measure_proximity, + .set_power_state = vcnl4000_set_power_state, }, [VCNL4040] = { .prod = "VCNL4040", .init = vcnl4200_init, .measure_light = vcnl4200_measure_light, .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, }, [VCNL4200] = { .prod = "VCNL4200", .init = vcnl4200_init, .measure_light = vcnl4200_measure_light, .measure_proximity = vcnl4200_measure_proximity, + .set_power_state = vcnl4200_set_power_state, }, };@@ -323,6 +353,23 @@ static const struct iio_chan_spec vcnl4000_channels[] = { } }; +static int vcnl4000_set_pm_runtime_state (struct vcnl4000_data *data,bool on) +{ +struct device *dev = &data->client->dev; +int ret; + +if (on) { + ret =pm_runtime_get_sync (dev); +if (ret <0 ) +pm_runtime_put_noidle (dev); + }else { +pm_runtime_mark_last_busy (dev); + ret =pm_runtime_put_autosuspend (dev); + } + +return ret; +} +static int vcnl4000_read_raw (struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int *val,int *val2,long mask)@@ -332,6 +379,10 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,switch (mask) {case IIO_CHAN_INFO_RAW : + ret =vcnl4000_set_pm_runtime_state (data, true); +if (ret <0 ) +return ret; +switch (chan->type) {case IIO_LIGHT : ret = data->chip_spec->measure_light (data, val);@@ -346,6 +397,7 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,default : ret = -EINVAL ; } +vcnl4000_set_pm_runtime_state (data, false);return ret;case IIO_CHAN_INFO_SCALE :if (chan->type !=IIO_LIGHT )@@ -394,7 +446,22 @@ static int vcnl4000_probe(struct i2c_client *client, indio_dev->name =VCNL4000_DRV_NAME ; indio_dev->modes =INDIO_DIRECT_MODE ; -return devm_iio_device_register (&client->dev, indio_dev); + ret =pm_runtime_set_active (&client->dev); +if (ret <0 ) + goto fail_poweroff; + + ret =iio_device_register (indio_dev); +if (ret <0 ) + goto fail_poweroff; + +pm_runtime_enable (&client->dev); +pm_runtime_set_autosuspend_delay (&client->dev,VCNL4000_SLEEP_DELAY_MS ); +pm_runtime_use_autosuspend (&client->dev); + +return 0 ; +fail_poweroff: + data->chip_spec->set_power_state (data, false); +return ret; }static const struct of_device_id vcnl_4000_of_match[] = {@@ -422,13 +489,59 @@ static const struct of_device_id vcnl_4000_of_match[] = { };MODULE_DEVICE_TABLE (of, vcnl_4000_of_match); +static int vcnl4000_remove (struct i2c_client *client) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (client); +struct vcnl4000_data *data =iio_priv (indio_dev); + +pm_runtime_dont_use_autosuspend (&client->dev); +pm_runtime_disable (&client->dev); +iio_device_unregister (indio_dev); +pm_runtime_set_suspended (&client->dev); + +return data->chip_spec->set_power_state (data, false); +}drivers/iio/light/vcnl4000.c static const struct of_device_id vcnl_4000_of_match[] = { · line 513
Quoted 10 lines
drivers/iio/light/vcnl4000.c +10
-0+ +static int __maybe_unused vcnl4000_runtime_suspend (struct device *dev) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); +struct vcnl4000_data *data =iio_priv (indio_dev); +int ret; + + ret = data->chip_spec->set_power_state (data, false); + +return ret;return data->chip_spec...drivers/iio/light/vcnl4000.c static const struct of_device_id vcnl_4000_of_match[] = { · line 524
Quoted 11 lines
drivers/iio/light/vcnl4000.c +11
-0+} + +static int __maybe_unused vcnl4000_runtime_resume (struct device *dev) +{ +struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev)); +struct vcnl4000_data *data =iio_priv (indio_dev); +int ret; + + ret = data->chip_spec->set_power_state (data, true); +if (ret <0 ) +return ret;I would define the
set_power_statecallback to return only < 0 for error and 0 for no error. (already true).
Quoted 3 lines
then
return
data->chip_spec->set_power_state(data, true);
Both returns simplified and also the one in vcnl4000_init.
Thanks for having a look,
-- Guido
Quoted 25 lines
Quoted 24 lines
drivers/iio/light/vcnl4000.c +13
-0+ +return 0 ; +} + +static const struct dev_pm_ops vcnl4000_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +SET_RUNTIME_PM_OPS (vcnl4000_runtime_suspend, + vcnl4000_runtime_resume,NULL ) +}; +static struct i2c_driver vcnl4000_driver = { .driver = { .name =VCNL4000_DRV_NAME , + .pm = &vcnl4000_pm_ops, .of_match_table = vcnl_4000_of_match, }, .probe = vcnl4000_probe, .id_table = vcnl4000_id, + .remove = vcnl4000_remove, };module_i2c_driver (vcnl4000_driver);