xilinx: DT/Kconfig changes
Subsystems (2)
cover xilinx: DT/Kconfig changes
Hi,
this is small series with misc changes target configs and DTs.
Thanks,
Michal
Ashok Reddy Soma (2):
arm: zynq: Enable alternative memory test
arm64: versal: Enable config to map TCM and OCM
Saeed Nowshadi (1):
arm64: zynqmp: Fix si570 clock output names and references
T Karthik Reddy (2):
arm64: zynqmp: Reduce console buffer size
arm64: zynqmp: Change spi-max-frequency for qspi mini
arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 10 +++++----- arch/arm/dts/zynqmp-mini-qspi.dts | 2 +- configs/xilinx_versal_virt_defconfig | 1 + configs/xilinx_zynq_virt_defconfig | 1 + include/configs/xilinx_zynqmp_mini.h | 2 ++ 5 files changed, 10 insertions(+), 6 deletions(-)
Signature · 1 line
2.26.2
PATCH 1/5 arm: zynq: Enable alternative memory test
From: Ashok Reddy Soma <[email protected]>
Enable alternative memory test for zynq platforms.
---
configs/xilinx_zynq_virt_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/xilinx_zynq_virt_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_IMLS=y CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x00000000 CONFIG_SYS_MEMTEST_END=0x00001000 CONFIG_CMD_DFU=y
Signature · 1 line
2.26.2
PATCH 2/5 arm64: versal: Enable config to map TCM and OCM
In reply to Michal SimekFrom: Ashok Reddy Soma <[email protected]>
Enable CONFIG_DEFINE_TCM_OCM_MMAP to map TCM and OCM memory.
---
configs/xilinx_versal_virt_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/xilinx_versal_virt_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_VERSAL=y CONFIG_SYS_TEXT_BASE=0x8000000 CONFIG_SYS_MALLOC_F_LEN=0x100000 CONFIG_DM_GPIO=y +CONFIG_DEFINE_TCM_OCM_MMAP=y CONFIG_COUNTER_FREQUENCY=62500000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y
Signature · 1 line
2.26.2
PATCH 3/5 arm64: zynqmp: Reduce console buffer size
In reply to Michal SimekFrom: T Karthik Reddy <[email protected]>
Reduce console buffer size to 1kbyte to accommodate memory allocations in mini u-boot for zynqmp.
---
include/configs/xilinx_zynqmp_mini.h | 2 ++ 1 file changed, 2 insertions(+)
include/configs/xilinx_zynqmp_mini.h +2 -0
@@ -27,5 +27,7 @@/* BOOTP options */ #undef CONFIG_BOOTP_BOOTFILESIZE#undef CONFIG_BOOTP_MAY_FAIL +#undef CONFIG_SYS_CBSIZE +#define CONFIG_SYS_CBSIZE 1024#endif /* __CONFIG_ZYNQMP_MINI_H */
Signature · 1 line
2.26.2
PATCH 4/5 arm64: zynqmp: Fix si570 clock output names and references
In reply to Michal SimekFrom: Saeed Nowshadi <[email protected]>
Align clock output names with node references.
---
arch/arm/dts/zynqmp-e-a2197-00-revA.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm/dts/zynqmp-e-a2197-00-revA.dts +5 -5
@@ -2,7 +2,7 @@ /* * dts file for Xilinx Versal a2197 RevA System Controller * - * (C) Copyright 2019, Xilinx, Inc. + * (C) Copyright 2019 - 2020, Xilinx, Inc. * * Michal Simek <[email protected]> */
@@ -421,14 +421,14 @@ temperature-stability = <50>; factory-fout = <156250000>; clock-frequency = <156250000>; - clock-output-names = "si570_hsdp_clk"; + clock-output-names = "si570_zsfp_clk"; }; }; i2c at 6 { /* USER_SI570_1 */ #address-cells = <1>; #size-cells = <0>; reg = <6>; - si570_user1_clk: clock-generator at 5d { /* u205 */ + si570_user1: clock-generator at 5d { /* u205 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x5f>;
@@ -510,7 +510,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - si570_ddr_dimm2: clock-generator at 60 { /* u3 */ + si570_lpddr4clk2: clock-generator at 60 { /* u3 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x60>;
@@ -524,7 +524,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <5>; - si570_lpddr4: clock-generator at 60 { /* u4 */ + si570_lpddr4clk1: clock-generator at 60 { /* u4 */ #clock-cells = <0>; compatible = "silabs,si570"; reg = <0x60>;
Signature · 1 line
2.26.2
PATCH 5/5 arm64: zynqmp: Change spi-max-frequency for qspi mini
In reply to Michal SimekFrom: T Karthik Reddy <[email protected]>
Change mini u-boot qspi spi-max-frequency to 108Mhz, make the frequency similar to full u-boot qspi flash spi-max-frequency.
---
arch/arm/dts/zynqmp-mini-qspi.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/zynqmp-mini-qspi.dts +1 -1
@@ -70,7 +70,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; - spi-max-frequency = <10000000>; + spi-max-frequency = <108000000>; }; };
Signature · 1 line
2.26.2
cover xilinx: DT/Kconfig changes
In reply to Michal Simek?t 12. 5. 2020 v 8:55 odes?latel Michal Simek <[email protected]> napsal:
Quoted 27 lines
Hi,
this is small series with misc changes target configs and DTs.
Thanks,
MichalAshok Reddy Soma (2):
arm: zynq: Enable alternative memory test
arm64: versal: Enable config to map TCM and OCMSaeed Nowshadi (1):
arm64: zynqmp: Fix si570 clock output names and referencesT Karthik Reddy (2):
arm64: zynqmp: Reduce console buffer size
arm64: zynqmp: Change spi-max-frequency for qspi miniarch/arm/dts/zynqmp-e-a2197-00-revA.dts | 10 +++++----- arch/arm/dts/zynqmp-mini-qspi.dts | 2 +- configs/xilinx_versal_virt_defconfig | 1 + configs/xilinx_zynq_virt_defconfig | 1 + include/configs/xilinx_zynqmp_mini.h | 2 ++ 5 files changed, 10 insertions(+), 6 deletions(-)
Quoted 3 lines
--
2.26.2
Applied all.
M
Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs