Improve ACPI detection code for atomisp
Subsystems (4)
cover Improve ACPI detection code for atomisp
Add support to read the sensor configuration directly from the BIOS, instead of relying on DMI match tables.
As we don't have the legacy models there which has their own DMI match tables, we can't remove them, but this change should make this driver to better detect unlisted devices.
Mauro Carvalho Chehab (5):
media: atomisp: improve sensor detection code to use _DSM table Revert "media: atomisp: Add some ACPI detection info" Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
media: atomisp: change clock source default for ISP2401
media: atomisp: improve ACPI/DMI detection logs
drivers/staging/media/atomisp/TODO | 43 +---- .../media/atomisp/i2c/atomisp-gc0310.c | 11 -- .../media/atomisp/i2c/atomisp-gc2235.c | 11 -- .../media/atomisp/i2c/atomisp-lm3554.c | 11 -- .../media/atomisp/i2c/atomisp-mt9m114.c | 11 -- .../media/atomisp/i2c/atomisp-ov2680.c | 11 -- .../media/atomisp/i2c/atomisp-ov2722.c | 11 -- .../media/atomisp/i2c/ov5693/atomisp-ov5693.c | 11 -- .../media/atomisp/pci/atomisp_gmin_platform.c | 157 ++++++++++++++---- 9 files changed, 129 insertions(+), 148 deletions(-)
Signature · 1 line
2.26.2
PATCH 2/5 Revert "media: atomisp: Add some ACPI detection info"
This reverts commit 0d64e9420583cbc3c4a3f949ebe38fd8f7769281.
As gmin_subdev_add() now takes the ACPI handle directly, we can deprecate the code that were doing this inside each I2C driver.
PS.: This also reverts commit c03496b3bd92 ("media: atomisp: add a notice about possible leak resources")
--- drivers/staging/media/atomisp/i2c/atomisp-gc0310.c | 11 ----------- drivers/staging/media/atomisp/i2c/atomisp-gc2235.c | 11 ----------- drivers/staging/media/atomisp/i2c/atomisp-lm3554.c | 11 ----------- drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c | 11 ----------- drivers/staging/media/atomisp/i2c/atomisp-ov2680.c | 11 ----------- drivers/staging/media/atomisp/i2c/atomisp-ov2722.c | 11 ----------- .../staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c | 11 ----------- 7 files changed, 77 deletions(-)
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c +0 -11
@@ -1310,17 +1310,6 @@ static int gc0310_probe(struct i2c_client *client)int ret;void *pdata;unsigned int i; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -pr_info ("%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() dev =kzalloc (sizeof (*dev),GFP_KERNEL );if (!dev)
drivers/staging/media/atomisp/i2c/atomisp-gc2235.c +0 -11
@@ -1052,17 +1052,6 @@ static int gc2235_probe(struct i2c_client *client)void *gcpdev;int ret;unsigned int i; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -pr_info ("%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() dev =kzalloc (sizeof (*dev),GFP_KERNEL );if (!dev)
drivers/staging/media/atomisp/i2c/atomisp-lm3554.c +0 -11
@@ -851,17 +851,6 @@ static int lm3554_probe(struct i2c_client *client)struct lm3554 *flash;unsigned int i;int ret; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -pr_info ("%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() flash =kzalloc (sizeof (*flash),GFP_KERNEL );if (!flash)
drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c +0 -11
@@ -1817,17 +1817,6 @@ static int mt9m114_probe(struct i2c_client *client)int ret =0 ;unsigned int i;void *pdata; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -pr_info ("%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() /* Setup sensor configuration structure */ dev =kzalloc (sizeof (*dev),GFP_KERNEL );
drivers/staging/media/atomisp/i2c/atomisp-ov2680.c +0 -11
@@ -1244,17 +1244,6 @@ static int ov2680_probe(struct i2c_client *client)int ret;void *pdata;unsigned int i; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -dev_info (&client->dev,"%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() dev =kzalloc (sizeof (*dev),GFP_KERNEL );if (!dev)
drivers/staging/media/atomisp/i2c/atomisp-ov2722.c +0 -11
@@ -1215,17 +1215,6 @@ static int ov2722_probe(struct i2c_client *client)struct ov2722_device *dev;void *ovpdev;int ret; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -pr_info ("%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() dev =kzalloc (sizeof (*dev),GFP_KERNEL );if (!dev)
drivers/staging/media/atomisp/i2c/ov5693/atomisp-ov5693.c +0 -11
@@ -1902,17 +1902,6 @@ static int ov5693_probe(struct i2c_client *client)int ret =0 ;void *pdata;unsigned int i; -acpi_handle handle; -struct acpi_device *adev; - - handle =ACPI_HANDLE (&client->dev); -if (!handle ||acpi_bus_get_device (handle, &adev)) { -dev_err (&client->dev,"Error could not get ACPI device\n" ); -return -ENODEV ; - } -pr_info ("%s: ACPI detected it on bus ID=%s, HID=%s\n" , - __func__,acpi_device_bid (adev),acpi_device_hid (adev)); -// FIXME: may need to release resources allocated by acpi_bus_get_device() /* * Firmware workaround: Some modules use a "secondary default"
Signature · 1 line
2.26.2
PATCH 1/5 media: atomisp: improve sensor detection code to use _DSM table
In reply to Mauro Carvalho ChehabInstead of keep hardcoding device-specific tables, read them directly from the ACPI BIOS, if available.
This method is know to work with Asus T101HA device. the same table is also visible on EzPad devices. So, it seems that at least some BIOSes use this method to pass data about ISP2401-connected sensors.
--- drivers/staging/media/atomisp/TODO | 43 +------ .../media/atomisp/pci/atomisp_gmin_platform.c | 105 +++++++++++++++++- 2 files changed, 101 insertions(+), 47 deletions(-)
drivers/staging/media/atomisp/TODO +1 -42
@@ -18,48 +18,7 @@ TODO This should be converted to the usual way, using V4L2 async subdev framework to wait for cameras to be probed; -2. Support for newer board-specific data (like Asus T101HA support) uses a - DMI match table to retrieve sensor's data, using hard-coded values. - It sounds feasible to retrieve those data directly from ACPI via _DSM - tables (like this one, associated with CAM1 at the above mentioned - hardware): - - Name (C1CD, Buffer (0x0220){}) - Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method - { - If ((Arg0 == ToUUID ("dc2f6c4f-045b-4f1d-97b9-882a6860a4be"))) - { - Local0 = Package (0x12) - { - "CamId", - "ov2680", - "CamType", - "1", - "CsiPort", - "0", - "CsiLanes", - "1", - "CsiFmt", - "15", - "CsiBayer", - "0", - "CamClk", - "1", - "Regulator1p8v", - "0", - "Regulator2p8v", - "0" - } - Return (Local0) - } - - The code there at atomisp_gmin_platform has an EFI parser, but it - assumes that the information would be stored on a different way. - - As the Kernel has support for reading data from _DSM, via - acpi_evaluate_dsm(), it sounds doable to use such infra and remove the - DMI match, at least for some devices. This will likely allow covering - more devices that could also be using the same EFI UUID. +2. Use ACPI _DSM table - DONE! 3. Switch the driver to use pm_runtime stuff. Right now, it probes the existing PMIC code and sensors call it directly.
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +100 -5
139 lines not on this page · raw message
Signature · 1 line
2.26.2
PATCH 5/5 media: atomisp: improve ACPI/DMI detection logs
In reply to Mauro Carvalho ChehabAs there are several ways where the driver could possible retrieve sensor data, make the prints clearer about what was detected and from where.
--- .../media/atomisp/pci/atomisp_gmin_platform.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +12 -6
@@ -936,7 +936,8 @@ int atomisp_gmin_register_vcm_control(struct camera_vcm_control *vcmCtrl) }EXPORT_SYMBOL_GPL (atomisp_gmin_register_vcm_control); -static int gmin_get_hardcoded_var (struct gmin_cfg_var *varlist, +static int gmin_get_hardcoded_var (struct device *dev, +struct gmin_cfg_var *varlist,const char *var8,char *out,size_t *out_len) {struct gmin_cfg_var *gv;
@@ -947,6 +948,8 @@ static int gmin_get_hardcoded_var(struct gmin_cfg_var *varlist,if (strcmp (var8, gv->name))continue ; +dev_info (dev,"Found DMI entry for '%s'\n" , var8); + vl =strlen (gv->val);if (vl > *out_len -1 )return -ENOSPC ;
@@ -1070,9 +1073,10 @@ static int gmin_get_config_var(struct device *maindev,*/ id =dmi_first_match (gmin_vars);if (id) { -dev_info (maindev,"Found DMI entry for '%s'\n" , var8); -return gmin_get_hardcoded_var (id->driver_data, var8, out, - out_len); + ret =gmin_get_hardcoded_var (maindev, id->driver_data, var8, + out, out_len); +if (!ret) +return 0 ; }/* Our variable names are ASCII by construction, but EFI names
@@ -1102,9 +1106,9 @@ static int gmin_get_config_var(struct device *maindev, *out_len = ev->var.DataSize;dev_info (maindev,"found EFI entry for '%s'\n" , var8); }else if (is_gmin) { -dev_warn (maindev,"Failed to find gmin variable %s\n" , var8); +dev_info (maindev,"Failed to find EFI gmin variable %s\n" , var8); }else { -dev_warn (maindev,"Failed to find variable %s\n" , var8); +dev_info (maindev,"Failed to find EFI variable %s\n" , var8); }kfree (ev);
@@ -1123,6 +1127,8 @@ int gmin_get_var_int(struct device *dev, bool is_gmin, const char *var, int def)if (!ret) { val[len] =0 ; ret =kstrtol (val,0 , &result); + }else { +dev_info (dev,"%s: using default (%d)\n" , var, def); }return ret ? def : result;
Signature · 1 line
2.26.2
PATCH 4/5 media: atomisp: change clock source default for ISP2401
In reply to Mauro Carvalho ChehabThere's a notice there stating that the PLL is not reliable for CHT. Yet, it tries to read it via the BIOS. Well, this will fail (at least with the devices I checked the DSDT tables). So, change the logic in a way that it will change the default, depending on the ISP version.
--- .../media/atomisp/pci/atomisp_gmin_platform.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +16 -2
@@ -493,9 +493,23 @@ static struct gmin_subdev *gmin_subdev_add(struct v4l2_subdev *subdev) gmin_subdevs[i].subdev = subdev; gmin_subdevs[i].clock_num =gmin_get_var_int (dev, false,"CamClk" ,0 ); -/*WA:CHT requires XTAL clock as PLL is not stable.*/ +/* +* FIXME: +* WA:CHT requires XTAL clock as PLL is not stable. +* +* However, such data doesn't seem to be present at the _DSM +* table under the GUID dc2f6c4f-045b-4f1d-97b9-882a6860a4be. +* So, let's change the default according with the ISP version, +* but allowing it to be overridden by BIOS or by DMI match tables. +*/ +if (IS_ISP2401 ) + gmin_subdevs[i].clock_src = VLV2_CLK_XTAL_25_0MHz; +else + gmin_subdevs[i].clock_src =VLV2_CLK_PLL_19P2MHZ ; + gmin_subdevs[i].clock_src =gmin_get_var_int (dev, false,"ClkSrc" , -VLV2_CLK_PLL_19P2MHZ ); + gmin_subdevs[i].clock_src); + gmin_subdevs[i].csi_port =gmin_get_var_int (dev, false,"CsiPort" ,0 ); gmin_subdevs[i].csi_lanes =gmin_get_var_int (dev, false,"CsiLanes" ,1 );
Signature · 1 line
2.26.2
PATCH 3/5 Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
In reply to Mauro Carvalho ChehabNow that the EFI _DSM table is parsed by the driver, we don't need a DMI match anymore for Asus Transform T101HA.
This reverts commit 0a76fd8e8d202dcaabc714850205d5d75c9b8271.
--- .../media/atomisp/pci/atomisp_gmin_platform.c | 16 ---------------- 1 file changed, 16 deletions(-)
drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c +0 -16
@@ -328,15 +328,6 @@ static struct gmin_cfg_var i8880_vars[] = { {}, }; -static struct gmin_cfg_var asus_vars[] = { - {"OVTI2680:00_CsiPort" ,"1" }, - {"OVTI2680:00_CsiLanes" ,"1" }, - {"OVTI2680:00_CsiFmt" ,"15" }, - {"OVTI2680:00_CsiBayer" ,"0" }, - {"OVTI2680:00_CamClk" ,"1" }, - {}, -}; -static const struct dmi_system_id gmin_vars[] = { { .ident ="BYT-T FFD8" ,
@@ -374,13 +365,6 @@ static const struct dmi_system_id gmin_vars[] = { }, .driver_data = i8880_vars, }, - { - .ident = "T101HA", - .matches = { - DMI_MATCH(DMI_BOARD_NAME, "T101HA"), - }, - .driver_data = asus_vars, - }, {} };
Signature · 1 line
2.26.2