reduce CPU usage on exit for IOPOLL
cover reduce CPU usage on exit for IOPOLL
[1,2] are small preps for the future that should change nothing functionally.
[3] helps to reduce CPU usage on exit. We don't care about latency and CQEs when io_uring is going away, so checking it every HZ/20 should be enough
Please, check the assumptions, because I hope that nobody expects
->iopoll() to do real work but not just completing.
Pavel Begunkov (3):
io_uring: partially inline io_iopoll_getevents()
io_uring: remove nr_events arg from iopoll_check()
io_uring: don't burn CPU for iopoll on exit
fs/io_uring.c | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-)
Signature · 1 line
2.24.0
PATCH 1/3 io_uring: partially inline io_iopoll_getevents()
io_iopoll_reap_events() doesn't care about returned valued of io_iopoll_getevents() and does the same checks for list emptiness and need_resched(). Just use io_do_iopoll().
io_sq_thread() doesn't check return value as well. It also passes min=0, so there never be the second iteration inside io_poll_getevents(). Inline it there too.
--- fs/io_uring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
fs/io_uring.c +3 -3
@@ -2057,7 +2057,7 @@ static void io_iopoll_reap_events(struct io_ring_ctx *ctx)while (!list_empty (&ctx->poll_list)) {unsigned int nr_events =0 ; -io_iopoll_getevents (ctx, &nr_events,1 ); +io_do_iopoll (ctx, &nr_events,1 );/* * Ensure we allow local-to-the-cpu processing to take place,
@@ -6311,8 +6311,8 @@ static int io_sq_thread(void *data)unsigned nr_events =0 ;mutex_lock (&ctx->uring_lock); -if (!list_empty (&ctx->poll_list)) -io_iopoll_getevents (ctx, &nr_events,0 ); +if (!list_empty (&ctx->poll_list) && !need_resched ()) +io_do_iopoll (ctx, &nr_events,0 );else timeout = jiffies + ctx->sq_thread_idle;mutex_unlock (&ctx->uring_lock);
Signature · 1 line
2.24.0
PATCH 2/3 io_uring: remove nr_events arg from iopoll_check()
In reply to Pavel BegunkovNobody checks io_iopoll_check()'s output parameter @nr_events. Remove the parameter and declare it further down the stack.
--- fs/io_uring.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
fs/io_uring.c +5 -7
@@ -2073,9 +2073,9 @@ static void io_iopoll_reap_events(struct io_ring_ctx *ctx)mutex_unlock (&ctx->uring_lock); } -static int io_iopoll_check (struct io_ring_ctx *ctx,unsigned *nr_events, -long min) +static int io_iopoll_check (struct io_ring_ctx *ctx,long min) { +unsigned int nr_events =0 ;int iters =0 , ret =0 ;/*
@@ -2109,11 +2109,11 @@ static int io_iopoll_check(struct io_ring_ctx *ctx, unsigned *nr_events,mutex_lock (&ctx->uring_lock); } - ret =io_iopoll_getevents (ctx, nr_events, min); + ret =io_iopoll_getevents (ctx, &nr_events, min);if (ret <=0 )break ; ret =0 ; - }while (min && !*nr_events && !need_resched ()); + }while (min && !nr_events && !need_resched ());mutex_unlock (&ctx->uring_lock);return ret;
@@ -7963,8 +7963,6 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, goto out; }if (flags &IORING_ENTER_GETEVENTS ) { -unsigned nr_events =0 ; - min_complete =min (min_complete, ctx->cq_entries);/*
@@ -7975,7 +7973,7 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit,*/ if (ctx->flags &IORING_SETUP_IOPOLL && !(ctx->flags &IORING_SETUP_SQPOLL )) { - ret =io_iopoll_check (ctx, &nr_events, min_complete); + ret =io_iopoll_check (ctx, min_complete); }else { ret =io_cqring_wait (ctx, min_complete, sig, sigsz); }
Signature · 1 line
2.24.0
PATCH 3/3 io_uring: don't burn CPU for iopoll on exit
In reply to Pavel BegunkovFirst of all don't spin in io_ring_ctx_wait_and_kill() on iopoll. Requests won't complete faster because of that, but only lengthen io_uring_release().
The same goes for offloaded cleanup in io_ring_exit_work() -- it already has waiting loop, don't do blocking active spinning.
For that, pass min=0 into io_iopoll_[try_]reap_events(), so it won't actively spin. Leave the function if io_do_iopoll() there can't complete a request to sleep in io_ring_exit_work().
--- fs/io_uring.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)
fs/io_uring.c +11 -12
@@ -2048,7 +2048,7 @@ static int io_iopoll_getevents(struct io_ring_ctx *ctx, unsigned int *nr_events,* We can't just wait for polled events to come to us, we have to actively * find and complete them. */ -static void io_iopoll_reap_events (struct io_ring_ctx *ctx) +static void io_iopoll_try_reap_events (struct io_ring_ctx *ctx) {if (!(ctx->flags &IORING_SETUP_IOPOLL ))return ;
@@ -2057,8 +2057,11 @@ static void io_iopoll_reap_events(struct io_ring_ctx *ctx)while (!list_empty (&ctx->poll_list)) {unsigned int nr_events =0 ; -io_do_iopoll (ctx, &nr_events,1 ); +io_do_iopoll (ctx, &nr_events,0 ); +/* let it sleep and repeat later if can't complete a request */ +if (nr_events ==0 ) +break ;/* * Ensure we allow local-to-the-cpu processing to take place, * in this case we need to ensure that we reap all events.
@@ -7634,7 +7637,6 @@ static void io_ring_ctx_free(struct io_ring_ctx *ctx) ctx->sqo_mm =NULL ; } -io_iopoll_reap_events (ctx);io_sqe_buffer_unregister (ctx);io_sqe_files_unregister (ctx);io_eventfd_unregister (ctx);
@@ -7701,11 +7703,8 @@ static int io_remove_personalities(int id, void *p, void *data)static void io_ring_exit_work (struct work_struct *work) { -struct io_ring_ctx *ctx; - - ctx = container_of(work, struct io_ring_ctx, exit_work); -if (ctx->rings) -io_cqring_overflow_flush (ctx, true); + struct io_ring_ctx *ctx = container_of(work, struct io_ring_ctx, + exit_work);/* * If we're doing polled IO and end up having requests being
@@ -7713,11 +7712,11 @@ static void io_ring_exit_work(struct work_struct *work)* we're waiting for refs to drop. We need to reap these manually, * as nobody else will be looking for them. */ -while (!wait_for_completion_timeout (&ctx->ref_comp,HZ /20 )) { -io_iopoll_reap_events (ctx); +do {if (ctx->rings)io_cqring_overflow_flush (ctx, true); - } +io_iopoll_try_reap_events (ctx); + }while (!wait_for_completion_timeout (&ctx->ref_comp,HZ /20 ));io_ring_ctx_free (ctx); }
@@ -7733,10 +7732,10 @@ static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)if (ctx->io_wq)io_wq_cancel_all (ctx->io_wq); -io_iopoll_reap_events (ctx);/* if we failed setting up the ctx, we might not have any rings */ if (ctx->rings)io_cqring_overflow_flush (ctx, true); +io_iopoll_try_reap_events (ctx);idr_for_each (&ctx->personality_idr, io_remove_personalities, ctx);INIT_WORK (&ctx->exit_work, io_ring_exit_work);queue_work (system_wq, &ctx->exit_work);
Signature · 1 line
2.24.0
Jens Axboe
maintainerQuoted 8 lines · Pavel Begunkov
[1,2] are small preps for the future that should change nothing functionally.
[3] helps to reduce CPU usage on exit. We don't care about latency and CQEs when
io_uringis going away, so checking it every HZ/20 should be enough
Please, check the assumptions, because I hope that nobody expects
->iopoll() to do real work but not just completing.
I think it's fine to do it in 1/20th second intervals, if you exit with pending poll requests.
Hence it looks good to me, I've applied it.
Signature · 1 line
Jens Axboe