minor improvements to the kms_cursor_crc doc and some comments cleanup

cover

 lib/igt_fb.c           |  4 ++--
 tests/kms_cursor_crc.c | 37 ++++++++++++++++++++++++++++---------
 2 files changed, 30 insertions(+), 11 deletions(-)
2.27.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
---
 lib/igt_fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
index fd33907b..3864b7a1 100644
@@ -3548,7 +3548,7 @@ cairo_surface_t *igt_get_cairo_surface(int fd, struct igt_fb *fb)
 
 /**
  * igt_get_cairo_ctx:
- * @fd: open i915 drm file descriptor
+ * @fd: open drm file descriptor
  * @fb: pointer to an #igt_fb structure
  *
  * This initializes a cairo surface for @fb and then allocates a drawing context

@@ -3594,7 +3594,7 @@ void igt_put_cairo_ctx(cairo_t *cr)
 
 /**
  * igt_remove_fb:
- * @fd: open i915 drm file descriptor
+ * @fd: open drm file descriptor
  * @fb: pointer to an #igt_fb structure
  *
  * This function releases all resources allocated in igt_create_fb() for @fb.

2.27.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
---
 tests/kms_cursor_crc.c | 37 ++++++++++++++++++++++++++++---------
 1 file changed, 28 insertions(+), 9 deletions(-)
index 7e6b24cc..a6faa785 100644
@@ -31,12 +31,13 @@
 
 
 IGT_TEST_DESCRIPTION(
-   "Use the display CRC support to validate cursor plane functionality. "
-   "The test will position the cursor plane either fully onscreen, "
-   "partially onscreen, or fully offscreen, using either a fully opaque "
-   "or fully transparent surface. In each case it then reads the PF CRC "
-   "and compares it with the CRC value obtained when the cursor plane "
-   "was disabled.");
+   "Use the display CRC support to validate cursor plane functionality. "\
+   "The test will position the cursor plane either fully onscreen, "\
+   "partially onscreen, or fully offscreen, using either a fully opaque "\
+   "or fully transparent surface. In each case, it enables the cursor plane "\
+   "and then reads the PF CRC (hardware test) and compares it with the CRC "\
+   "value obtained when the cursor plane was disabled and its drawing is "
+   "directly inserted on the PF by software.");
 
 #ifndef DRM_CAP_CURSOR_WIDTH
 #define DRM_CAP_CURSOR_WIDTH 0x8

@@ -483,7 +484,7 @@ static void test_cursor_alpha(data_t *data, double a)
 	int curw = data->curw;
 	int curh = data->curh;
 
-	/*alpha cursor fb*/
+	/*Alpha cursor fb with white color*/
 	fb_id = igt_create_fb(data->drm_fd, curw, curh,
 				    DRM_FORMAT_ARGB8888,
 				    LOCAL_DRM_FORMAT_MOD_NONE,

@@ -493,15 +494,16 @@ static void test_cursor_alpha(data_t *data, double a)
 	igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, a);
 	igt_put_cairo_ctx(cr);
 
-	/*Hardware Test*/
+	/*Hardware Test - enable cursor and get PF CRC*/
 	cursor_enable(data);
 	igt_display_commit(display);
 	igt_wait_for_vblank(data->drm_fd, data->pipe);
 	igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &crc);
+
 	cursor_disable(data);
 	igt_remove_fb(data->drm_fd, &data->fb);
 
-	/*Software Test*/
+	/*Software Test - render cursor in software, drawn it directly on PF*/
 	cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb[FRONTBUFFER]);
 	igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, a);
 	igt_put_cairo_ctx(cr);

@@ -509,6 +511,8 @@ static void test_cursor_alpha(data_t *data, double a)
 	igt_display_commit(display);
 	igt_wait_for_vblank(data->drm_fd, data->pipe);
 	igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
+
+	/*Compare CRC from Hardware/Software tests*/
 	igt_assert_crc_equal(&crc, &ref_crc);
 
 	/*Clear Screen*/

@@ -686,13 +690,19 @@ static void run_tests_on_pipe(data_t *data, enum pipe pipe)
 		igt_require(data->output);
 	}
 
+        igt_describe("Create a maximum size cursor, then change the size in "\
+        "flight to smaller ones to see that the size is applied correctly.");
 	igt_subtest_f("pipe-%s-cursor-size-change", kmstest_pipe_name(pipe))
 		run_test(data, test_cursor_size,
 			 data->cursor_max_w, data->cursor_max_h);
 
+	igt_describe("Validates the composition of a fully opaque cursor "\
+	"plane, i.e., alpha channel equal to 1.0.");
 	igt_subtest_f("pipe-%s-cursor-alpha-opaque", kmstest_pipe_name(pipe))
 		run_test(data, test_cursor_opaque, data->cursor_max_w, data->cursor_max_h);
 
+	igt_describe("Validates the composition of a fully transparent cursor "\
+	"plane, i.e., alpha channel equal to 0.0.");
 	igt_subtest_f("pipe-%s-cursor-alpha-transparent", kmstest_pipe_name(pipe))
 		run_test(data, test_cursor_transparent, data->cursor_max_w, data->cursor_max_h);
 

@@ -726,15 +736,24 @@ static void run_tests_on_pipe(data_t *data, enum pipe pipe)
 		}
 
 		/* Using created cursor FBs to test cursor support */
+		igt_describe("Check if a given-size cursor is well-positioned inside the screen.");
 		igt_subtest_f("pipe-%s-cursor-%dx%d-onscreen", kmstest_pipe_name(pipe), w, h)
 			run_test(data, test_crc_onscreen, w, h);
+
+		igt_describe("Check if a given-size cursor is well-positioned outside the screen.");
 		igt_subtest_f("pipe-%s-cursor-%dx%d-offscreen", kmstest_pipe_name(pipe), w, h)
 			run_test(data, test_crc_offscreen, w, h);
+
+		igt_describe("Check the smooth and pixel-by-pixel given-size cursor movements on"\
+		"horizontal, vertical and diagonal.");
 		igt_subtest_f("pipe-%s-cursor-%dx%d-sliding", kmstest_pipe_name(pipe), w, h)
 			run_test(data, test_crc_sliding, w, h);
+
+		igt_describe("Check random placement of a cursor with given size.");
 		igt_subtest_f("pipe-%s-cursor-%dx%d-random", kmstest_pipe_name(pipe), w, h)
 			run_test(data, test_crc_random, w, h);
 
+		igt_describe("Check the rapid update of given-size cursor movements.");
 		igt_subtest_f("pipe-%s-cursor-%dx%d-rapid-movement", kmstest_pipe_name(pipe), w, h) {
 			run_test(data, test_rapid_movement, w, h);
 		}

2.27.0

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Cheers,
Arek
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Cheers,
Arek

minor improvements to the kms_cursor_crc doc and some comments cleanup

Melissa Wen

Melissa Wen

Melissa Wen

Patchwork

Patchwork

Arkadiusz Hiler

Melissa Wen