9pfs: readdir optimization
PATCH v7 3/6 9pfs: add new function v9fs_co_readdir_many()
In reply to Christian SchoenebeckThe newly added function v9fs_co_readdir_many() retrieves multiple directory entries with a single fs driver request. It is intended to replace uses of v9fs_co_readdir(), the latter only retrives a single directory entry per fs driver request instead.
The reason for this planned replacement is that for every fs driver request the coroutine is dispatched from main I/O thread to a background I/O thread and eventually dispatched back to main I/O thread. Hopping between threads adds latency. So if a 9pfs Treaddir request reads a large amount of directory entries, this currently sums up to huge latencies of several hundred ms or even more. So using v9fs_co_readdir_many() instead of v9fs_co_readdir() will provide significant performance improvements.
--- hw/9pfs/9p.h | 22 ++++++ hw/9pfs/codir.c | 196 +++++++++++++++++++++++++++++++++++++++++++++--- hw/9pfs/coth.h | 3 + 3 files changed, 210 insertions(+), 11 deletions(-)
hw/9pfs/9p.h +22 -0
@@ -215,6 +215,28 @@ static inline void v9fs_readdir_init(V9fsDir *dir)qemu_co_mutex_init (&dir->readdir_mutex); } +/** +* Type for 9p fs drivers' (a.k.a. 9p backends) result of readdir requests, +* which is a chained list of directory entries. +*/ +typedef struct V9fsDirEnt { +/* mandatory (must not be NULL) information for all readdir requests */ +struct dirent *dent; +/* +* optional (may be NULL): A full stat of each directory entry is just +* done if explicitly told to fs driver. +*/ +struct stat *st; +/* +* instead of an array, directory entries are always returned as +* chained list, that's because the amount of entries retrieved by fs +* drivers is dependent on the individual entries' name (since response +* messages are size limited), so the final amount cannot be estimated +* before hand +*/ +struct V9fsDirEnt *next; +}V9fsDirEnt ; +/* * Filled by fs driver on open and other * calls.
hw/9pfs/codir.c +185 -11
213 lines not on this page · raw message
hw/9pfs/coth.h +3 -0
@@ -49,6 +49,9 @@void co_run_in_worker_bh (void *); int coroutine_fn v9fs_co_readlink(V9fsPDU *, V9fsPath *, V9fsString *); int coroutine_fn v9fs_co_readdir(V9fsPDU *, V9fsFidState *, struct dirent **); +int coroutine_fn v9fs_co_readdir_many(V9fsPDU *, V9fsFidState *, +struct V9fsDirEnt **,off_t ,int32_t , +bool ); off_t coroutine_fn v9fs_co_telldir(V9fsPDU *, V9fsFidState *); void coroutine_fn v9fs_co_seekdir(V9fsPDU *, V9fsFidState *, off_t); void coroutine_fn v9fs_co_rewinddir(V9fsPDU *, V9fsFidState *);
Signature · 1 line
2.20.1
PATCH v7 1/6 tests/virtio-9p: added split readdir tests
In reply to Christian SchoenebeckThe previous, already existing 'basic' readdir test simply used a 'count' parameter big enough to retrieve all directory entries with a single Treaddir request.
In the 3 new 'split' readdir tests added by this patch, directory entries are retrieved, split over several Treaddir requests by picking small 'count' parameters which force the server to truncate the response. So the test client sends as many Treaddir requests as necessary to get all directory entries.
The following 3 new tests are added (executed in this sequence):
1. Split readdir test with count=512
2. Split readdir test with count=256
3. Split readdir test with count=128
This test case sequence is chosen because the smaller the 'count' value, the higher the chance of errors in case of implementation bugs on server side.
--- tests/qtest/virtio-9p-test.c | 108 +++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+)
tests/qtest/virtio-9p-test.c +108 -0
@@ -578,6 +578,7 @@ static bool fs_dirents_contain_name(struct V9fsDirent *e, const char* name)return false; } +/* basic readdir test where reply fits into a single response message */ static void fs_readdir (void *obj,void *data,QGuestAllocator *t_alloc) {QVirtio9P *v9p = obj;
@@ -631,6 +632,89 @@ static void fs_readdir(void *obj, void *data, QGuestAllocator *t_alloc)g_free (wnames[0 ]); } +/* readdir test where overall request is split over several messages */ +static void fs_readdir_split (void *obj,void *data,QGuestAllocator *t_alloc, +uint32_t count) +{ +QVirtio9P *v9p = obj; + alloc = t_alloc; +char *const wnames[] = {g_strdup (QTEST_V9FS_SYNTH_READDIR_DIR ) }; +uint16_t nqid; +v9fs_qid qid; +uint32_t nentries, npartialentries; +struct V9fsDirent *entries, *tail, *partialentries; +P9Req *req; +int fid; +uint64_t offset; + +fs_attach (v9p,NULL , t_alloc); + + fid =1 ; + offset =0 ; + entries =NULL ; + nentries =0 ; + tail =NULL ; + + req =v9fs_twalk (v9p,0 , fid,1 , wnames,0 ); +v9fs_req_wait_for_reply (req,NULL ); +v9fs_rwalk (req, &nqid,NULL ); + g_assert_cmpint(nqid, ==, 1); + + req =v9fs_tlopen (v9p, fid,O_DIRECTORY ,0 ); +v9fs_req_wait_for_reply (req,NULL ); +v9fs_rlopen (req, &qid,NULL ); + +/* +* send as many Treaddir requests as required to get all directory +* entries +*/ +while (true) { + npartialentries =0 ; + partialentries =NULL ; + + req =v9fs_treaddir (v9p, fid, offset, count,0 ); +v9fs_req_wait_for_reply (req,NULL ); +v9fs_rreaddir (req, &count, &npartialentries, &partialentries); +if (npartialentries >0 && partialentries) { +if (!entries) { + entries = partialentries; + nentries = npartialentries; + tail = partialentries; + }else { + tail->next = partialentries; + nentries += npartialentries; + } +while (tail->next) { + tail = tail->next; + } + offset = tail->offset; + }else { +break ; + } + } + +g_assert_cmpint ( + nentries, ==, +QTEST_V9FS_SYNTH_READDIR_NFILES +2 /* "." and ".." */ + ); + +/* +* Check all file names exist in returned entries, ignore their order +* though. +*/ + g_assert_cmpint(fs_dirents_contain_name(entries, "."), ==, true); + g_assert_cmpint(fs_dirents_contain_name(entries, ".."), ==, true); +for (int i =0 ; i <QTEST_V9FS_SYNTH_READDIR_NFILES ; ++i) { +char *name =g_strdup_printf (QTEST_V9FS_SYNTH_READDIR_FILE , i); + g_assert_cmpint(fs_dirents_contain_name(entries, name), ==, true); +g_free (name); + } + +v9fs_free_dirents (entries); + +g_free (wnames[0 ]); +} +static void fs_walk_no_slash (void *obj,void *data,QGuestAllocator *t_alloc) {QVirtio9P *v9p = obj;
@@ -793,6 +877,24 @@ static void fs_flush_ignored(void *obj, void *data, QGuestAllocator *t_alloc)g_free (wnames[0 ]); } +static void fs_readdir_split_128 (void *obj,void *data, +QGuestAllocator *t_alloc) +{ +fs_readdir_split (obj, data, t_alloc,128 ); +} + +static void fs_readdir_split_256 (void *obj,void *data, +QGuestAllocator *t_alloc) +{ +fs_readdir_split (obj, data, t_alloc,256 ); +} + +static void fs_readdir_split_512 (void *obj,void *data, +QGuestAllocator *t_alloc) +{ +fs_readdir_split (obj, data, t_alloc,512 ); +} +static void register_virtio_9p_test (void ) {qos_add_test ("config" ,"virtio-9p" , pci_config,NULL );
@@ -810,6 +912,12 @@ static void register_virtio_9p_test(void)qos_add_test ("fs/flush/ignored" ,"virtio-9p" , fs_flush_ignored,NULL );qos_add_test ("fs/readdir/basic" ,"virtio-9p" , fs_readdir,NULL ); +qos_add_test ("fs/readdir/split_512" ,"virtio-9p" , + fs_readdir_split_512,NULL ); +qos_add_test ("fs/readdir/split_256" ,"virtio-9p" , + fs_readdir_split_256,NULL ); +qos_add_test ("fs/readdir/split_128" ,"virtio-9p" , + fs_readdir_split_128,NULL ); }libqos_init (register_virtio_9p_test);
Signature · 1 line
2.20.1
PATCH v7 6/6 9pfs: clarify latency of v9fs_co_run_in_worker()
In reply to Christian SchoenebeckAs we just fixed a severe performance issue with Treaddir request handling, clarify this overall issue as a comment on v9fs_co_run_in_worker() with the intention to hopefully prevent such performance mistakes in future (and fixing other yet outstanding ones).
--- hw/9pfs/coth.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
hw/9pfs/coth.h +11 -1
@@ -19,7 +19,7 @@#include "qemu/coroutine.h" #include "9p.h" -/* +/** * we want to use bottom half because we want to make sure the below * sequence of events. *
@@ -28,6 +28,16 @@* 3. Enter the coroutine in the worker thread. * we cannot swap step 1 and 2, because that would imply worker thread * can enter coroutine while step1 is still running +* +* @b PERFORMANCE @b CONSIDERATIONS: As a rule of thumb, keep in mind +* that hopping between threads adds @b latency! So when handling a +* 9pfs request, avoid calling v9fs_co_run_in_worker() too often, because +* this might otherwise sum up to a significant, huge overall latency for +* providing the response for just a single request. For that reason it +* is highly recommended to fetch all data from fs driver with a single +* fs driver request on a background I/O thread (bottom half) in one rush +* first and then eventually assembling the final response from that data +* on main I/O thread (top half). */ #define v9fs_co_run_in_worker (code_block) \ do { \
Signature · 1 line
2.20.1
v7 cover 9pfs: readdir optimization
As previously mentioned, I was investigating performance issues with 9pfs. Raw file read/write of 9pfs is actually quite good, provided that client picked a reasonable high msize (maximum message size). I would recommend to log a warning on 9p server side if a client attached with a small msize that would cause performance issues for that reason.
However there are other aspects where 9pfs currently performs suboptimally, especially readdir handling of 9pfs is extremely slow, a simple readdir request of a guest typically blocks for several hundred milliseconds or even several seconds, no matter how powerful the underlying hardware is. The reason for this performance issue: latency.
Currently 9pfs is heavily dispatching a T_readdir request numerous times between main I/O thread and a background I/O thread back and forth; in fact it is actually hopping between threads even multiple times for every single directory entry during T_readdir request handling which leads in total to huge latencies for a single T_readdir request.
This patch series aims to address this severe performance issue of 9pfs T_readdir request handling. The actual performance optimization is patch 4.
v6->v7:
* Rebased to master: SHA-1 b442119329
* Handle directory seeking more consistently by doing it in do_readdir_many() instead of in v9fs_readdir() [patch 3], [patch 4].
* Updated API doc on v9fs_co_readdir_many(): make it clear that v9fs_free_dirents() must always be called, including error cases [patch 3].
* New patch: use different lock type for 9p2000.u vs. 9p2000.L
[patch 5].
Unchanged patches: [patch 1], [patch 2], [patch 6].
Message-ID of previous version (v6):
[email protected]
Message-ID of version with performance benchmark (v4):
[email protected]
Christian Schoenebeck (6):
tests/virtio-9p: added split readdir tests
9pfs: make v9fs_readdir_response_size() public
9pfs: add new function v9fs_co_readdir_many()
9pfs: T_readdir latency optimization
9pfs: differentiate readdir lock between 9P2000.u vs. 9P2000.L 9pfs: clarify latency of v9fs_co_run_in_worker()
hw/9pfs/9p.c | 144 ++++++++++++------------- hw/9pfs/9p.h | 50 ++++++++- hw/9pfs/codir.c | 196 +++++++++++++++++++++++++++++++++-- hw/9pfs/coth.h | 15 ++- tests/qtest/virtio-9p-test.c | 108 +++++++++++++++++++ 5 files changed, 419 insertions(+), 94 deletions(-)
Signature · 1 line
2.20.1
PATCH v7 4/6 9pfs: T_readdir latency optimization
Make top half really top half and bottom half really bottom half:
Each T_readdir request handling is hopping between threads (main I/O thread and background I/O driver threads) several times for every individual directory entry, which sums up to huge latencies for handling just a single T_readdir request.
Instead of doing that, collect now all required directory entries (including all potentially required stat buffers for each entry) in one rush on a background I/O thread from fs driver by calling the previously added function v9fs_co_readdir_many() instead of v9fs_co_readdir(), then assemble the entire resulting network response message for the readdir request on main I/O thread. The fs driver is still aborting the directory entry retrieval loop (on the background I/O thread inside of v9fs_co_readdir_many()) as soon as it would exceed the client's requested maximum R_readdir response size. So this will not introduce a performance penalty on another end.
Also: No longer seek initial directory position in v9fs_readdir(), as this is now handled (more consistently) by v9fs_co_readdir_many() instead.
--- hw/9pfs/9p.c | 132 ++++++++++++++++++++++----------------------------- 1 file changed, 58 insertions(+), 74 deletions(-)
hw/9pfs/9p.c +58 -74
@@ -972,30 +972,6 @@ static int coroutine_fn fid_to_qid(V9fsPDU *pdu, V9fsFidState *fidp,return 0 ; } -static int coroutine_fn dirent_to_qid(V9fsPDU *pdu, V9fsFidState *fidp, -struct dirent *dent,V9fsQID *qidp) -{ -struct stat stbuf; -V9fsPath path; -int err; - -v9fs_path_init (&path); - - err =v9fs_co_name_to_path (pdu, &fidp->path, dent->d_name, &path); -if (err <0 ) { - goto out; - } - err =v9fs_co_lstat (pdu, &path, &stbuf); -if (err <0 ) { - goto out; - } - err =stat_to_qid (pdu, &stbuf, qidp); - -out: -v9fs_path_free (&path); -return err; -} -V9fsPDU *pdu_alloc (V9fsState *s) {V9fsPDU *pdu =NULL ;
@@ -2328,62 +2304,74 @@ size_t v9fs_readdir_response_size(V9fsString *name)return 24 +v9fs_string_size (name); } +static void v9fs_free_dirents (struct V9fsDirEnt *e) +{ +struct V9fsDirEnt *next =NULL ; + +for (; e; e = next) { + next = e->next; +g_free (e->dent); +g_free (e->st); +g_free (e); + } +} + static int coroutine_fn v9fs_do_readdir(V9fsPDU *pdu, V9fsFidState *fidp, -int32_t max_count) +off_t offset,int32_t max_count) {size_t size;V9fsQID qid;V9fsString name;int len, err =0 ;int32_t count =0 ; -off_t saved_dir_pos;struct dirent *dent; +struct stat *st; +struct V9fsDirEnt *entries =NULL ; -/* save the directory position */ - saved_dir_pos =v9fs_co_telldir (pdu, fidp); -if (saved_dir_pos <0 ) { -return saved_dir_pos; - } - -while (1 ) { -v9fs_readdir_lock (&fidp->fs.dir); +/* +* inode remapping requires the device id, which in turn might be +* different for different directory entries, so if inode remapping is +* enabled we have to make a full stat for each directory entry +*/ +const bool dostat = pdu->s->ctx.export_flags &V9FS_REMAP_INODES ; - err =v9fs_co_readdir (pdu, fidp, &dent); -if (err || !dent) { -break ; - } -v9fs_string_init (&name); -v9fs_string_sprintf (&name,"%s" , dent->d_name); -if ((count +v9fs_readdir_response_size (&name)) > max_count) { -v9fs_readdir_unlock (&fidp->fs.dir); +/* +* Fetch all required directory entries altogether on a background IO +* thread from fs driver. We don't want to do that for each entry +* individually, because hopping between threads (this main IO thread +* and background IO driver thread) would sum up to huge latencies. +*/ + count =v9fs_co_readdir_many (pdu, fidp, &entries, offset, max_count, + dostat); +if (count <0 ) { + err = count; + count =0 ; + goto out; + } + count =0 ; -/* Ran out of buffer. Set dir back to old position and return */ -v9fs_co_seekdir (pdu, fidp, saved_dir_pos); -v9fs_string_free (&name); -return count; - } +for (struct V9fsDirEnt *e = entries; e; e = e->next) { + dent = e->dent;if (pdu->s->ctx.export_flags &V9FS_REMAP_INODES ) { -/* -* dirent_to_qid() implies expensive stat call for each entry, -* we must do that here though since inode remapping requires -* the device id, which in turn might be different for -* different entries; we cannot make any assumption to avoid -* that here. -*/ - err =dirent_to_qid (pdu, fidp, dent, &qid); + st = e->st; +/* e->st should never be NULL, but just to be sure */ +if (!st) { + err =-1 ; +break ; + } + +/* remap inode */ + err =stat_to_qid (pdu, st, &qid);if (err <0 ) { -v9fs_readdir_unlock (&fidp->fs.dir); -v9fs_co_seekdir (pdu, fidp, saved_dir_pos); -v9fs_string_free (&name); -return err; +break ; } }else {/* * Fill up just the path field of qid because the client uses * only that. To fill the entire qid structure we will have * to stat each dirent found, which is expensive. For the -* latter reason we don't call dirent_to_qid() here. Only drawback +* latter reason we don't call stat_to_qid() here. Only drawback * is that no multi-device export detection of stat_to_qid() * would be done and provided as error to the user here. But * user would get that error anyway when accessing those
@@ -2396,25 +2384,26 @@ static int coroutine_fn v9fs_do_readdir(V9fsPDU *pdu, V9fsFidState *fidp, qid.version =0 ; } +v9fs_string_init (&name); +v9fs_string_sprintf (&name,"%s" , dent->d_name); +/* 11 = 7 + 4 (7 = start offset, 4 = space for storing count) */ len =pdu_marshal (pdu,11 + count,"Qqbs" , &qid, dent->d_off, dent->d_type, &name); -v9fs_readdir_unlock (&fidp->fs.dir); +v9fs_string_free (&name);if (len <0 ) { -v9fs_co_seekdir (pdu, fidp, saved_dir_pos); -v9fs_string_free (&name); -return len; + err = len; +break ; } + count += len; -v9fs_string_free (&name); - saved_dir_pos = dent->d_off; } -v9fs_readdir_unlock (&fidp->fs.dir); - +out: +v9fs_free_dirents (entries);if (err <0 ) {return err; }
@@ -2457,12 +2446,7 @@ static void coroutine_fn v9fs_readdir(void *opaque) retval = -EINVAL ; goto out; } -if (initial_offset ==0 ) { -v9fs_co_rewinddir (pdu, fidp); - }else { -v9fs_co_seekdir (pdu, fidp, initial_offset); - } - count =v9fs_do_readdir (pdu, fidp, max_count); + count =v9fs_do_readdir (pdu, fidp, (off_t ) initial_offset, max_count);if (count <0 ) { retval = count; goto out;
Signature · 1 line
2.20.1
PATCH v7 5/6 9pfs: differentiate readdir lock between 9P2000.u vs. 9P2000.L
In reply to Christian SchoenebeckPrevious patch suggests that it might make sense to use a different mutex type now while handling readdir requests, depending on the precise protocol variant, as v9fs_do_readdir_with_stat() (used by 9P2000.u) uses a CoMutex to avoid deadlocks that might happen with QemuMutex otherwise, whereas do_readdir_many() (used by 9P2000.L) should better use a QemuMutex, as the precise behaviour of a failed CoMutex lock on fs driver side would not be clear.
This patch is just intended as transitional measure, as currently 9P2000.u vs. 9P2000.L implementations currently differ where the main logic of fetching directory entries is located at (9P2000.u still being more top half focused, while 9P2000.L already being bottom half focused in regards to fetching directory entries that is).
--- hw/9pfs/9p.c | 4 ++-- hw/9pfs/9p.h | 27 ++++++++++++++++++++++----- 2 files changed, 24 insertions(+), 7 deletions(-)
hw/9pfs/9p.c +2 -2
@@ -314,8 +314,8 @@ static V9fsFidState *alloc_fid(V9fsState *s, int32_t fid) f->next = s->fid_list; s->fid_list = f; -v9fs_readdir_init (&f->fs.dir); -v9fs_readdir_init (&f->fs_reclaim.dir); +v9fs_readdir_init (s->proto_version, &f->fs.dir); +v9fs_readdir_init (s->proto_version, &f->fs_reclaim.dir);return f; }
hw/9pfs/9p.h +22 -5
@@ -197,22 +197,39 @@ typedef struct V9fsXattrtypedef struct V9fsDir {DIR *stream; -CoMutex readdir_mutex; +P9ProtoVersion proto_version; +/* readdir mutex type used for 9P2000.u protocol variant */ +CoMutex readdir_mutex_u; +/* readdir mutex type used for 9P2000.L protocol variant */ +QemuMutex readdir_mutex_L; }V9fsDir ;static inline void v9fs_readdir_lock (V9fsDir *dir) { -qemu_co_mutex_lock (&dir->readdir_mutex); +if (dir->proto_version ==V9FS_PROTO_2000U ) { +qemu_co_mutex_lock (&dir->readdir_mutex_u); + }else { +qemu_mutex_lock (&dir->readdir_mutex_L); + } }static inline void v9fs_readdir_unlock (V9fsDir *dir) { -qemu_co_mutex_unlock (&dir->readdir_mutex); +if (dir->proto_version ==V9FS_PROTO_2000U ) { +qemu_co_mutex_unlock (&dir->readdir_mutex_u); + }else { +qemu_mutex_unlock (&dir->readdir_mutex_L); + } } -static inline void v9fs_readdir_init (V9fsDir *dir) +static inline void v9fs_readdir_init (P9ProtoVersion proto_version,V9fsDir *dir) { -qemu_co_mutex_init (&dir->readdir_mutex); + dir->proto_version = proto_version; +if (proto_version ==V9FS_PROTO_2000U ) { +qemu_co_mutex_init (&dir->readdir_mutex_u); + }else { +qemu_mutex_init (&dir->readdir_mutex_L); + } }/**
Signature · 1 line
2.20.1
PATCH v7 2/6 9pfs: make v9fs_readdir_response_size() public
In reply to Christian SchoenebeckRename function v9fs_readdir_data_size() -> v9fs_readdir_response_size() and make it callable from other units. So far this function is only used by 9p.c, however subsequent patches require the function to be callable from another 9pfs unit. And as we're at it; also make it clear for what this function is used for.
--- hw/9pfs/9p.c | 10 ++++++++-- hw/9pfs/9p.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-)
hw/9pfs/9p.c +8 -2
@@ -2313,7 +2313,13 @@ out_nofid:pdu_complete (pdu, err); } -static size_t v9fs_readdir_data_size (V9fsString *name) +/** +* Returns size required in Rreaddir response for the passed dirent @p name. +* +* @param name - directory entry's name (i.e. file name, directory name) +* @returns required size in bytes +*/ +size_t v9fs_readdir_response_size (V9fsString *name) {/* * Size of each dirent on the wire: size of qid (13) + size of offset (8)
@@ -2348,7 +2354,7 @@ static int coroutine_fn v9fs_do_readdir(V9fsPDU *pdu, V9fsFidState *fidp, }v9fs_string_init (&name);v9fs_string_sprintf (&name,"%s" , dent->d_name); -if ((count +v9fs_readdir_data_size (&name)) > max_count) { +if ((count +v9fs_readdir_response_size (&name)) > max_count) {v9fs_readdir_unlock (&fidp->fs.dir);/* Ran out of buffer. Set dir back to old position and return */
hw/9pfs/9p.h +1 -0
@@ -419,6 +419,7 @@ void v9fs_path_init(V9fsPath *path);void v9fs_path_free (V9fsPath *path);void v9fs_path_sprintf (V9fsPath *path,const char *fmt, ...);void v9fs_path_copy (V9fsPath *dst,const V9fsPath *src); +size_t v9fs_readdir_response_size (V9fsString *name);int v9fs_name_to_path (V9fsState *s,V9fsPath *dirpath,const char *name,V9fsPath *path); int v9fs_device_realize_common(V9fsState *s, const V9fsTransport *t,
Signature · 1 line
2.20.1
Re: [PATCH v7 3/6] 9pfs: add new function v9fs_co_readdir_many()
In reply to Christian SchoenebeckQuoted 93 lines · On Sonntag, 19. Juli 2020 14:29:13 CEST Christian Schoenebeck wrote:
The newly added function
v9fs_co_readdir_many()retrieves multiple directory entries with a single fs driver request. It is intended to replace uses ofv9fs_co_readdir(), the latter only retrives a single directory entry per fs driver request instead.The reason for this planned replacement is that for every fs driver request the coroutine is dispatched from main I/O thread to a background I/O thread and eventually dispatched back to main I/O thread. Hopping between threads adds latency. So if a 9pfs Treaddir request reads a large amount of directory entries, this currently sums up to huge latencies of several hundred ms or even more. So using
v9fs_co_readdir_many()instead ofv9fs_co_readdir()will provide significant performance improvements.Signed-off-by Christian Schoenebeck <[email protected]>--- hw/9pfs/9p.h | 22 ++++++ hw/9pfs/codir.c | 196 +++++++++++++++++++++++++++++++++++++++++++++--- hw/9pfs/coth.h | 3 + 3 files changed, 210 insertions(+), 11 deletions(-)hw/9pfs/9p.h +22
-0@@ -215,6 +215,28 @@ static inline void v9fs_readdir_init(V9fsDir *dir)qemu_co_mutex_init (&dir->readdir_mutex); } +/** +* Type for 9p fs drivers' (a.k.a. 9p backends) result of readdir requests, +* which is a chained list of directory entries. +*/ +typedef struct V9fsDirEnt { +/* mandatory (must not be NULL) information for all readdir requests */ +struct dirent *dent; +/* +* optional (may be NULL): A full stat of each directory entry is just +* done if explicitly told to fs driver. +*/ +struct stat *st; +/* +* instead of an array, directory entries are always returned as +* chained list, that's because the amount of entries retrieved by fs +* drivers is dependent on the individual entries' name (since response +* messages are size limited), so the final amount cannot be estimated +* before hand +*/ +struct V9fsDirEnt *next; +}V9fsDirEnt ; +/* * Filled by fs driver on open and other * calls. hw/9pfs/codir.c +23
-1@@ -18,28 +18,202 @@#include "qemu/main-loop.h" #include "coth.h" +/* +* This is solely executed on a background IO thread. +*/ +static int do_readdir (V9fsPDU *pdu,V9fsFidState *fidp,struct dirent **dent) +{ +int err =0 ; +V9fsState *s = pdu->s; +struct dirent *entry; + + errno =0 ; + entry = s->ops->readdir (&s->ctx, &fidp->fs); +if (!entry && errno) { + *dent =NULL ; + err = -errno; + }else { + *dent = entry; + } +return err; +} + +/* +* TODO: This will be removed for performance reasons. +* Use v9fs_co_readdir_many() instead. +*/ int coroutine_fn v9fs_co_readdir(V9fsPDU *pdu, V9fsFidState *fidp,struct dirent **dent) {int err; -V9fsState *s = pdu->s;if (v9fs_request_cancelled (pdu)) {
hw/9pfs/codir.c line 57
Quoted 10 lines
hw/9pfs/codir.c +5
-3return -EINTR ; } - v9fs_co_run_in_worker( - { - struct dirent *entry; +v9fs_co_run_in_worker ({ + err =do_readdir (pdu, fidp, dent); + }); +return err; +}
Ok, this ^ part (precisely: do_readdir() and v9fs_co_readdir()) can still be sliced out into a separate patch, and apparently makes sense, as it would avoid cluttering this patch like ...
Quoted 48 lines
hw/9pfs/codir.c +48
-0+ +/* +* This is solely executed on a background IO thread. +* +* See v9fs_co_readdir_many() (as its only user) below for details. +*/ +static int do_readdir_many (V9fsPDU *pdu,V9fsFidState *fidp, +struct V9fsDirEnt **entries,off_t offset, +int32_t maxsize,bool dostat) +{ +V9fsState *s = pdu->s; +V9fsString name; +int len, err =0 ; +int32_t size =0 ; +off_t saved_dir_pos; +struct dirent *dent; +struct V9fsDirEnt *e =NULL ; +V9fsPath path; +struct stat stbuf; + + *entries =NULL ; +v9fs_path_init (&path); + +/* +* TODO: Here should be a warn_report_once() if lock failed. +* +* With a good 9p client we should not get into concurrency here, +* because a good client would not use the same fid for concurrent +* requests. We do the lock here for safety reasons though. However +* the client would then suffer performance issues, so better log that +* issue here. +*/ +v9fs_readdir_lock (&fidp->fs.dir); + +/* seek directory to requested initial position */ +if (offset ==0 ) { + s->ops->rewinddir (&s->ctx, &fidp->fs); + }else { + s->ops->seekdir (&s->ctx, &fidp->fs, offset); + } + +/* save the directory position */ + saved_dir_pos = s->ops->telldir (&s->ctx, &fidp->fs); +if (saved_dir_pos <0 ) { + err = saved_dir_pos; + goto out; + } +
hw/9pfs/codir.c line 36
Quoted 10 lines
hw/9pfs/codir.c +6
-3+while (true) { +/* get directory entry from fs driver */ + err =do_readdir (pdu, fidp, &dent); +if (err || !dent) { +break ; + } - errno =0 ; - entry = s->ops->readdir (&s->ctx, &fidp->fs); -if (!entry && errno) {
... here ...
Quoted 26 lines
hw/9pfs/codir.c +3
-0+/* +* stop this loop as soon as it would exceed the allowed maximum +* response message size for the directory entries collected so far, + * because anything beyond that size would need to be
discarded by + * 9p controller (main thread / top half) anywayhw/9pfs/codir.c +20
-0+*/ +v9fs_string_init (&name); +v9fs_string_sprintf (&name,"%s" , dent->d_name); + len =v9fs_readdir_response_size (&name); +v9fs_string_free (&name); +if (size + len > maxsize) { +/* this is not an error case actually */ +break ; + } + +/* append next node to result chain */ +if (!e) { + *entries = e =g_malloc0 (sizeof (V9fsDirEnt)); + }else { + e = e->next =g_malloc0 (sizeof (V9fsDirEnt)); + } + e->dent =g_malloc0 (sizeof (struct dirent )); +memcpy (e->dent, dent,sizeof (struct dirent )); + +/* perform a full stat() for directory entry if requested by caller */ + if (dostat) {
hw/9pfs/codir.c line 40
Quoted 8 lines
hw/9pfs/codir.c +4
-3+ err = s->ops->name_to_path ( + &s->ctx, &fidp->path, dent->d_name, &path + ); +if (err <0 ) { err = -errno; - }else { - *dent = entry; - err =0 ;
... and here.
Quoted 82 lines
hw/9pfs/codir.c +33
-1+break ; } - }); + + err = s->ops->lstat (&s->ctx, &path, &stbuf); +if (err <0 ) { + err = -errno; +break ; + } + + e->st =g_malloc0 (sizeof (struct stat )); +memcpy (e->st, &stbuf,sizeof (struct stat )); + } + + size += len; + saved_dir_pos = dent->d_off; + } + +/* restore (last) saved position */ + s->ops->seekdir (&s->ctx, &fidp->fs, saved_dir_pos); + +out: +v9fs_readdir_unlock (&fidp->fs.dir); +v9fs_path_free (&path); +if (err <0 ) { +return err; + } +return size; +} + +/** +* @brief Reads multiple directory entries in one rush. +* +* Retrieves the requested (max. amount of) directory entries from the fs +* driver. This function must only be called by the main IO thread (top half). + * Internally this function call will be dispatched to a background IO thread + * (bottom half) where it is eventually executed by the fs driver. + *
+ * @discussion Acquiring multiple directory entries in one rush from the fs
+ * driver, instead of retrieving each directory entry individually, is very + * beneficial from performance point of view. Because for every fs driver + * request latency is added, which in practice could lead to overall + * latencies of several hundred ms for reading all entries (of just a single + * directory) if every directory entry was individually requested from fs + * driver.
+ *
+ * @note You must @b ALWAYS call @cv9fs_free_dirents(entries)after calling + *v9fs_co_readdir_many(), both on success and on error cases of this + * function, to avoid memory leaks once @p entries are no longer needed. + *
+ * @param pdu - the causing 9p (T_readdir) client request
+ * @param fidp - already opened directory where readdir shall be performed on + * @param entries - output for directory entries (must not be NULL) + * @param offset - initial position inside the directory the function shall +
* seek to before retrieving the directory entries + *
@param maxsize - maximum result message body size (in bytes)
+ * @param dostat - whether astat()should be performed and returned for
+ * each directory entry
+ * @returns resulting response message body size (in bytes) on success,
+ * negative error code otherwise
+ */hw/9pfs/codir.c +13
-0+int coroutine_fn v9fs_co_readdir_many(V9fsPDU *pdu, V9fsFidState *fidp, +struct V9fsDirEnt **entries, +off_t offset,int32_t maxsize, +bool dostat) +{ +int err =0 ; + +if (v9fs_request_cancelled (pdu)) { +return -EINTR ; + } +v9fs_co_run_in_worker ({ + err =do_readdir_many (pdu, fidp, entries, offset, maxsize, dostat); + });return err; }hw/9pfs/coth.h +0
-0
hw/9pfs/coth.h line 57
Quoted 9 lines
hw/9pfs/coth.h +2
-0@@ -49,6 +49,9 @@void co_run_in_worker_bh (void *); int coroutine_fn v9fs_co_readlink(V9fsPDU *, V9fsPath *, V9fsString *); int coroutine_fn v9fs_co_readdir(V9fsPDU *, V9fsFidState *, struct dirent **); +int coroutine_fn v9fs_co_readdir_many(V9fsPDU *, V9fsFidState *, +struct V9fsDirEnt **,off_t ,int32_t , +bool ); off_t coroutine_fn v9fs_co_telldir(V9fsPDU *, V9fsFidState *); void coroutine_fn v9fs_co_seekdir(V9fsPDU *, V9fsFidState *, off_t); void coroutine_fn v9fs_co_rewinddir(V9fsPDU *, V9fsFidState *);
So I'll prepare a v8 with this patch here split into two.
But this is it. I don't see another chunk in this patch set that could be split further down in an useful way.
Best regards,
Christian Schoenebeck
Re: [PATCH v7 3/6] 9pfs: add new function v9fs_co_readdir_many()
Quoted 301 lines · On Tue, 28 Jul 2020 10:33:42 +0200 Christian Schoenebeck…
Quoted 93 lines · On Sonntag, 19. Juli 2020 14:29:13 CEST Christian Schoenebeck wrote:
The newly added function
v9fs_co_readdir_many()retrieves multiple directory entries with a single fs driver request. It is intended to replace uses ofv9fs_co_readdir(), the latter only retrives a single directory entry per fs driver request instead.The reason for this planned replacement is that for every fs driver request the coroutine is dispatched from main I/O thread to a background I/O thread and eventually dispatched back to main I/O thread. Hopping between threads adds latency. So if a 9pfs Treaddir request reads a large amount of directory entries, this currently sums up to huge latencies of several hundred ms or even more. So using
v9fs_co_readdir_many()instead ofv9fs_co_readdir()will provide significant performance improvements.Signed-off-by Christian Schoenebeck <[email protected]>--- hw/9pfs/9p.h | 22 ++++++ hw/9pfs/codir.c | 196 +++++++++++++++++++++++++++++++++++++++++++++--- hw/9pfs/coth.h | 3 + 3 files changed, 210 insertions(+), 11 deletions(-)hw/9pfs/9p.h +22
-0@@ -215,6 +215,28 @@ static inline void v9fs_readdir_init(V9fsDir *dir)qemu_co_mutex_init (&dir->readdir_mutex); } +/** +* Type for 9p fs drivers' (a.k.a. 9p backends) result of readdir requests, +* which is a chained list of directory entries. +*/ +typedef struct V9fsDirEnt { +/* mandatory (must not be NULL) information for all readdir requests */ +struct dirent *dent; +/* +* optional (may be NULL): A full stat of each directory entry is just +* done if explicitly told to fs driver. +*/ +struct stat *st; +/* +* instead of an array, directory entries are always returned as +* chained list, that's because the amount of entries retrieved by fs +* drivers is dependent on the individual entries' name (since response +* messages are size limited), so the final amount cannot be estimated +* before hand +*/ +struct V9fsDirEnt *next; +}V9fsDirEnt ; +/* * Filled by fs driver on open and other * calls. hw/9pfs/codir.c +23
-1@@ -18,28 +18,202 @@#include "qemu/main-loop.h" #include "coth.h" +/* +* This is solely executed on a background IO thread. +*/ +static int do_readdir (V9fsPDU *pdu,V9fsFidState *fidp,struct dirent **dent) +{ +int err =0 ; +V9fsState *s = pdu->s; +struct dirent *entry; + + errno =0 ; + entry = s->ops->readdir (&s->ctx, &fidp->fs); +if (!entry && errno) { + *dent =NULL ; + err = -errno; + }else { + *dent = entry; + } +return err; +} + +/* +* TODO: This will be removed for performance reasons. +* Use v9fs_co_readdir_many() instead. +*/ int coroutine_fn v9fs_co_readdir(V9fsPDU *pdu, V9fsFidState *fidp,struct dirent **dent) {int err; -V9fsState *s = pdu->s;if (v9fs_request_cancelled (pdu)) {hw/9pfs/codir.c line 57
Quoted 10 lines
hw/9pfs/codir.c +5
-3return -EINTR ; } - v9fs_co_run_in_worker( - { - struct dirent *entry; +v9fs_co_run_in_worker ({ + err =do_readdir (pdu, fidp, dent); + }); +return err; +}Ok, this ^ part (precisely:
do_readdir()andv9fs_co_readdir()) can still be sliced out into a separate patch, and apparently makes sense, as it would avoid cluttering this patch like ...Quoted 48 lines
hw/9pfs/codir.c +48
-0+ +/* +* This is solely executed on a background IO thread. +* +* See v9fs_co_readdir_many() (as its only user) below for details. +*/ +static int do_readdir_many (V9fsPDU *pdu,V9fsFidState *fidp, +struct V9fsDirEnt **entries,off_t offset, +int32_t maxsize,bool dostat) +{ +V9fsState *s = pdu->s; +V9fsString name; +int len, err =0 ; +int32_t size =0 ; +off_t saved_dir_pos; +struct dirent *dent; +struct V9fsDirEnt *e =NULL ; +V9fsPath path; +struct stat stbuf; + + *entries =NULL ; +v9fs_path_init (&path); + +/* +* TODO: Here should be a warn_report_once() if lock failed. +* +* With a good 9p client we should not get into concurrency here, +* because a good client would not use the same fid for concurrent +* requests. We do the lock here for safety reasons though. However +* the client would then suffer performance issues, so better log that +* issue here. +*/ +v9fs_readdir_lock (&fidp->fs.dir); + +/* seek directory to requested initial position */ +if (offset ==0 ) { + s->ops->rewinddir (&s->ctx, &fidp->fs); + }else { + s->ops->seekdir (&s->ctx, &fidp->fs, offset); + } + +/* save the directory position */ + saved_dir_pos = s->ops->telldir (&s->ctx, &fidp->fs); +if (saved_dir_pos <0 ) { + err = saved_dir_pos; + goto out; + } +hw/9pfs/codir.c line 36
Quoted 10 lines
hw/9pfs/codir.c +6
-3+while (true) { +/* get directory entry from fs driver */ + err =do_readdir (pdu, fidp, &dent); +if (err || !dent) { +break ; + } - errno =0 ; - entry = s->ops->readdir (&s->ctx, &fidp->fs); -if (!entry && errno) {... here ...
Quoted 26 lines
hw/9pfs/codir.c +3
-0+/* +* stop this loop as soon as it would exceed the allowed maximum +* response message size for the directory entries collected so far, + * because anything beyond that size would need to be
discarded by + * 9p controller (main thread / top half) anywayhw/9pfs/codir.c +20
-0+*/ +v9fs_string_init (&name); +v9fs_string_sprintf (&name,"%s" , dent->d_name); + len =v9fs_readdir_response_size (&name); +v9fs_string_free (&name); +if (size + len > maxsize) { +/* this is not an error case actually */ +break ; + } + +/* append next node to result chain */ +if (!e) { + *entries = e =g_malloc0 (sizeof (V9fsDirEnt)); + }else { + e = e->next =g_malloc0 (sizeof (V9fsDirEnt)); + } + e->dent =g_malloc0 (sizeof (struct dirent )); +memcpy (e->dent, dent,sizeof (struct dirent )); + +/* perform a full stat() for directory entry if requested by caller */ + if (dostat) {
hw/9pfs/codir.c line 40
Quoted 8 lines
hw/9pfs/codir.c +4
-3+ err = s->ops->name_to_path ( + &s->ctx, &fidp->path, dent->d_name, &path + ); +if (err <0 ) { err = -errno; - }else { - *dent = entry; - err =0 ;... and here.
Quoted 82 lines
hw/9pfs/codir.c +33
-1+break ; } - }); + + err = s->ops->lstat (&s->ctx, &path, &stbuf); +if (err <0 ) { + err = -errno; +break ; + } + + e->st =g_malloc0 (sizeof (struct stat )); +memcpy (e->st, &stbuf,sizeof (struct stat )); + } + + size += len; + saved_dir_pos = dent->d_off; + } + +/* restore (last) saved position */ + s->ops->seekdir (&s->ctx, &fidp->fs, saved_dir_pos); + +out: +v9fs_readdir_unlock (&fidp->fs.dir); +v9fs_path_free (&path); +if (err <0 ) { +return err; + } +return size; +} + +/** +* @brief Reads multiple directory entries in one rush. +* +* Retrieves the requested (max. amount of) directory entries from the fs +* driver. This function must only be called by the main IO thread (top half). + * Internally this function call will be dispatched to a background IO thread + * (bottom half) where it is eventually executed by the fs driver. + *
+ * @discussion Acquiring multiple directory entries in one rush from the fs
+ * driver, instead of retrieving each directory entry individually, is very + * beneficial from performance point of view. Because for every fs driver + * request latency is added, which in practice could lead to overall + * latencies of several hundred ms for reading all entries (of just a single + * directory) if every directory entry was individually requested from fs + * driver.
+ *
+ * @note You must @b ALWAYS call @cv9fs_free_dirents(entries)after calling + *v9fs_co_readdir_many(), both on success and on error cases of this + * function, to avoid memory leaks once @p entries are no longer needed. + *
+ * @param pdu - the causing 9p (T_readdir) client request
+ * @param fidp - already opened directory where readdir shall be performed on + * @param entries - output for directory entries (must not be NULL) + * @param offset - initial position inside the directory the function shall +
* seek to before retrieving the directory entries + *
@param maxsize - maximum result message body size (in bytes)
+ * @param dostat - whether astat()should be performed and returned for
+ * each directory entry
+ * @returns resulting response message body size (in bytes) on success,
+ * negative error code otherwise
+ */hw/9pfs/codir.c +13
-0+int coroutine_fn v9fs_co_readdir_many(V9fsPDU *pdu, V9fsFidState *fidp, +struct V9fsDirEnt **entries, +off_t offset,int32_t maxsize, +bool dostat) +{ +int err =0 ; + +if (v9fs_request_cancelled (pdu)) { +return -EINTR ; + } +v9fs_co_run_in_worker ({ + err =do_readdir_many (pdu, fidp, entries, offset, maxsize, dostat); + });return err; }hw/9pfs/coth.h +0
-0hw/9pfs/coth.h line 57
Quoted 9 lines
hw/9pfs/coth.h +2
-0@@ -49,6 +49,9 @@void co_run_in_worker_bh (void *); int coroutine_fn v9fs_co_readlink(V9fsPDU *, V9fsPath *, V9fsString *); int coroutine_fn v9fs_co_readdir(V9fsPDU *, V9fsFidState *, struct dirent **); +int coroutine_fn v9fs_co_readdir_many(V9fsPDU *, V9fsFidState *, +struct V9fsDirEnt **,off_t ,int32_t , +bool ); off_t coroutine_fn v9fs_co_telldir(V9fsPDU *, V9fsFidState *); void coroutine_fn v9fs_co_seekdir(V9fsPDU *, V9fsFidState *, off_t); void coroutine_fn v9fs_co_rewinddir(V9fsPDU *, V9fsFidState *);So I'll prepare a v8 with this patch here split into two.
Quoted 7 lines
But this is it. I don't see another chunk in this patch set that could be split further down in an useful way.
Best regards,
Christian Schoenebeck
You're in charge now so feel free to do that if the development+testing cost is acceptable to you. You already know my take on having smaller patches :)
Cheers,
--
Greg
Re: [PATCH v7 3/6] 9pfs: add new function v9fs_co_readdir_many()
Quoted 10 lines · On Dienstag, 28. Juli 2020 10:46:00 CEST Greg Kurz wrote:
Quoted 7 lines
So I'll prepare a v8 with this patch here split into two.
But this is it. I don't see another chunk in this patch set that could be split further down in an useful way.
Best regards,
Christian SchoenebeckYou're in charge now so feel free to do that if the development+testing cost is acceptable to you.
Yep, that's the plan. This patch set is already thoroughly tested by me, so I would like to avoid major changes for this series now that would require me to restart major testing cycles.
In this particular case, this patch-split ends up in 100% identical code. So it is really just git history tweaking after all.
Quoted 2 lines
You already know my take on having smaller
patches :)
A pure desire for something is one thing, the actually available real-life options are another thing. If you see more options than I can identify, you are always invited to make your call.
Plus this patch series already contain trivial patches for a long time (e.g. patch 1, 2, 6), and yet I haven't seen any ack from your side for any of them. Be invited for that as well.
Best regards,
Christian Schoenebeck
Re: [PATCH v7 5/6] 9pfs: differentiate readdir lock between 9P2000.u vs. 9P2000.L
In reply to Christian SchoenebeckQuoted 50 lines · On Sonntag, 19. Juli 2020 15:20:11 CEST Christian Schoenebeck wrote:
Previous patch suggests that it might make sense to use a different mutex type now while handling readdir requests, depending on the precise protocol variant, as
v9fs_do_readdir_with_stat()(used by 9P2000.u) uses a CoMutex to avoid deadlocks that might happen with QemuMutex otherwise, whereasdo_readdir_many()(used by 9P2000.L) should better use a QemuMutex, as the precise behaviour of a failed CoMutex lock on fs driver side would not be clear.This patch is just intended as transitional measure, as currently 9P2000.u vs. 9P2000.L implementations currently differ where the main logic of fetching directory entries is located at (9P2000.u still being more top half focused, while 9P2000.L already being bottom half focused in regards to fetching directory entries that is).
Signed-off-by Christian Schoenebeck <[email protected]>--- hw/9pfs/9p.c | 4 ++-- hw/9pfs/9p.h | 27 ++++++++++++++++++++++----- 2 files changed, 24 insertions(+), 7 deletions(-)hw/9pfs/9p.c +2
-2@@ -314,8 +314,8 @@ static V9fsFidState *alloc_fid(V9fsState *s, int32_t fid) f->next = s->fid_list; s->fid_list = f; -v9fs_readdir_init (&f->fs.dir); -v9fs_readdir_init (&f->fs_reclaim.dir); +v9fs_readdir_init (s->proto_version, &f->fs.dir); +v9fs_readdir_init (s->proto_version, &f->fs_reclaim.dir);return f; }hw/9pfs/9p.h +5
-1@@ -197,22 +197,39 @@ typedef struct V9fsXattrtypedef struct V9fsDir {DIR *stream; -CoMutex readdir_mutex; +P9ProtoVersion proto_version; +/* readdir mutex type used for 9P2000.u protocol variant */ +CoMutex readdir_mutex_u; +/* readdir mutex type used for 9P2000.L protocol variant */ +QemuMutex readdir_mutex_L; }V9fsDir ;
hw/9pfs/9p.h typedef struct V9fsXattr · line 214
Quoted 10 lines
hw/9pfs/9p.h +5
-1static inline void v9fs_readdir_lock (V9fsDir *dir) { -qemu_co_mutex_lock (&dir->readdir_mutex); +if (dir->proto_version ==V9FS_PROTO_2000U ) { +qemu_co_mutex_lock (&dir->readdir_mutex_u); + }else { +qemu_mutex_lock (&dir->readdir_mutex_L); + } }
I wonder whether I should make a minor addition to this patch: returnig an error to client if client sends T_readdir while not having opened the session as 9P2000.L, and likewise returning an error if client sends T_read on a directory while not using a 9P2000.u session. That would prevent the thoretical issue of a broken client using the wrong mutex type.
It's maybe overkill, since the plan was actually to bury this patch in git history by subsequently removing the lock entirely, but as I am preparing a v8 anyway, and this is like 2 lines more, so probably not a big deal to add it.
Quoted 13 lines
hw/9pfs/9p.h +6
-2static inline void v9fs_readdir_unlock (V9fsDir *dir) { -qemu_co_mutex_unlock (&dir->readdir_mutex); +if (dir->proto_version ==V9FS_PROTO_2000U ) { +qemu_co_mutex_unlock (&dir->readdir_mutex_u); + }else { +qemu_mutex_unlock (&dir->readdir_mutex_L); + } } -static inline void v9fs_readdir_init (V9fsDir *dir) +static inline void v9fs_readdir_init (P9ProtoVersion proto_version,V9fsDir *dir) {
hw/9pfs/9p.h typedef struct V9fsXattr · line 235
Quoted 10 lines
hw/9pfs/9p.h +6
-1-qemu_co_mutex_init (&dir->readdir_mutex); + dir->proto_version = proto_version; +if (proto_version ==V9FS_PROTO_2000U ) { +qemu_co_mutex_init (&dir->readdir_mutex_u); + }else { +qemu_mutex_init (&dir->readdir_mutex_L); + } }/**
Best regards,
Christian Schoenebeck
Re: [PATCH v7 3/6] 9pfs: add new function v9fs_co_readdir_many()
In reply to Christian SchoenebeckQuoted 22 lines · On Tue, 28 Jul 2020 11:34:12 +0200 Christian Schoenebeck…
Quoted 10 lines · On Dienstag, 28. Juli 2020 10:46:00 CEST Greg Kurz wrote:
Quoted 7 lines
So I'll prepare a v8 with this patch here split into two.
But this is it. I don't see another chunk in this patch set that could be split further down in an useful way.
Best regards,
Christian SchoenebeckYou're in charge now so feel free to do that if the development+testing cost is acceptable to you.
Yep, that's the plan. This patch set is already thoroughly tested by me, so I would like to avoid major changes for this series now that would require me to restart major testing cycles.
In this particular case, this patch-split ends up in 100% identical code. So it is really just git history tweaking after all.
Quoted 2 lines
You already know my take on having smaller
patches :)
Quoted 8 lines
A pure desire for something is one thing, the actually available real-life options are another thing. If you see more options than I can identify, you are always invited to make your call.
Plus this patch series already contain trivial patches for a long time (e.g. patch 1, 2, 6), and yet I haven't seen any ack from your side for any of them. Be invited for that as well.
I'm now starting to reach a steady-state in my new job. I should hopefully be able to find some cycles for the trivial patches at least.
Thanks for your patience.
Quoted 4 lines
Best regards,
Christian Schoenebeck