mtd: pxa3xx_nand: add support for Armada 8k
Subsystems (3)
cover mtd: pxa3xx_nand: add support for Armada 8k
This series adds NAND flash support to Aramda 8k systems. Patches make the necessary changes to the pxa3xx_nand driver and DT files.
v3:
Address Stefan's comments on patch #3
Move hunks from patch #3 to #5 to fix bisectability
v2:
Rebase on current master. Fixes conflict with commit 661c98121d4 ("mtd: nand:
pxa3xx: Fix not calling dev_xxx with a device")
Baruch Siach (2):
arm: dts: armada-cp110-master: update nand-controller
mtd: pxa3xx_nand: remove dead code
Shmuel Hazan (3):
arm: dts: armada-cp110-slave: add missing cps_nand
mtd: pxa3xx_nand: port to use driver model
mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
arch/arm/dts/armada-cp110-master.dtsi | 15 ++- arch/arm/dts/armada-cp110-slave.dtsi | 16 +++ drivers/mtd/nand/raw/Kconfig | 2 + drivers/mtd/nand/raw/pxa3xx_nand.c | 180 ++++++++++++++------------ 4 files changed, 125 insertions(+), 88 deletions(-)
Signature · 1 line
2.28.0
PATCH 1/5 arm: dts: armada-cp110-slave: add missing cps_nand
From: Shmuel Hazan <[email protected]>
Align node properties to kernel dts node.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility with the current driver.
--- arch/arm/dts/armada-cp110-slave.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm/dts/armada-cp110-slave.dtsi +16 -0
@@ -267,6 +267,22 @@ utmi-port = <UTMI_PHY_TO_USB3_HOST0>; status = "disabled"; }; + + cps_nand: nand at 720000 { + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&cps_syscon0 1 2>, + <&cps_syscon0 1 17>; + marvell,system-controller = <&cps_syscon0>; + nand-enable-arbiter; + num-cs = <1>; + status = "disabled"; + }; }; cps_pcie0: pcie at f4600000 {
Signature · 1 line
2.28.0
PATCH 2/5 arm: dts: armada-cp110-master: update nand-controller
In reply to Baruch SiachAlign node properties to kernel dts node.
The change of compatible property does not affect any currently supported board.
Keep U-Boot specific nand-enable-arbiter, and num-cs for compatibility with the current driver.
--- arch/arm/dts/armada-cp110-master.dtsi | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
arch/arm/dts/armada-cp110-master.dtsi +9 -6
@@ -285,15 +285,18 @@ }; cpm_nand: nand at 720000 { - compatible = "marvell,mvebu-pxa3xx-nand"; - reg = <0x720000 0x100>; + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; #address-cells = <1>; - - clocks = <&cpm_syscon0 1 2>; + #size-cells = <0>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&cpm_syscon0 1 2>, + <&cpm_syscon0 1 17>; + marvell,system-controller = <&cpm_syscon0>; nand-enable-arbiter; num-cs = <1>; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; status = "disabled"; };
Signature · 1 line
2.28.0
PATCH 3/5 mtd: pxa3xx_nand: port to use driver model
In reply to Baruch SiachFrom: Shmuel Hazan <[email protected]>
Use the generic DT code to find the device compatible property for us. This makes the driver look more like other current drivers. It also make it easier to add support for other variants like Armada 8K in a future commit.
--- drivers/mtd/nand/raw/Kconfig | 1 + drivers/mtd/nand/raw/pxa3xx_nand.c | 116 +++++++++++++---------------- 2 files changed, 54 insertions(+), 63 deletions(-)
drivers/mtd/nand/raw/Kconfig +1 -0
@@ -195,6 +195,7 @@ endif config NAND_PXA3XX bool "Support for NAND on PXA3xx and Armada 370/XP/38x" select SYS_NAND_SELF_INIT + select DM_MTD imply CMD_NAND help This enables the driver for the NAND flash device found on
drivers/mtd/nand/raw/pxa3xx_nand.c +53 -63
168 lines not on this page · raw message
Signature · 1 line
2.28.0
PATCH 4/5 mtd: pxa3xx_nand: remove dead code
In reply to Baruch SiachThe kfree() call is unreachable, and is not needed. Remove this call and the fail_disable_clk label.
--- drivers/mtd/nand/raw/pxa3xx_nand.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
drivers/mtd/nand/raw/pxa3xx_nand.c +3 -9
@@ -1768,7 +1768,7 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)struct pxa3xx_nand_host *host;struct nand_chip *chip =NULL ;struct mtd_info *mtd; -int ret, cs; +int cs; pdata = info->pdata;if (pdata->num_cs <=0 )
@@ -1804,19 +1804,13 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)/* Allocate a buffer to allow flash detection */ info->buf_size =INIT_BUFFER_SIZE ; info->data_buff =kmalloc (info->buf_size,GFP_KERNEL ); -if (info->data_buff ==NULL ) { - ret = -ENOMEM ; - goto fail_disable_clk; - } +if (info->data_buff ==NULL ) +return -ENOMEM ;/* initialize all interrupts to be disabled */ disable_int (info,NDSR_MASK );return 0 ; - -kfree (info->data_buff); -fail_disable_clk: -return ret; }static int pxa3xx_nand_probe_dt (struct udevice *dev,struct pxa3xx_nand_info *info)
Signature · 1 line
2.28.0
PATCH 5/5 mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
In reply to Baruch SiachFrom: Shmuel Hazan <[email protected]>
Based on Linux kernel commit fc256f5789cb ("mtd: nand: pxa3xx: enable NAND controller if the SoC needs it"). This commit adds support for the Armada 8040 nand controller.
The kernel commit says this:
Marvell recent SoCs like A7k/A8k do not boot with NAND flash controller activated by default. Enabling the controller is a matter of writing in a system controller register that may also be used for other NAND related choices.
--- drivers/mtd/nand/raw/Kconfig | 1 + drivers/mtd/nand/raw/pxa3xx_nand.c | 52 ++++++++++++++++++++++++------ 2 files changed, 43 insertions(+), 10 deletions(-)
drivers/mtd/nand/raw/Kconfig +1 -0
@@ -196,6 +196,7 @@ config NAND_PXA3XX bool "Support for NAND on PXA3xx and Armada 370/XP/38x" select SYS_NAND_SELF_INIT select DM_MTD + select SYSCON imply CMD_NAND help This enables the driver for the NAND flash device found on
drivers/mtd/nand/raw/pxa3xx_nand.c +42 -10
128 lines not on this page · raw message
Signature · 1 line
2.28.0
cover mtd: pxa3xx_nand: add support for Armada 8k
In reply to Baruch SiachHi Baruch,
Quoted 7 lines · Baruch Siach
This series adds NAND flash support to Aramda 8k systems. Patches make the necessary changes to the
pxa3xx_nanddriver and DT files.v3:
Address Stefan's comments on patch #3Move hunks from patch #3 to #5 to fix bisectability
Thanks. I'll look into it soonish.
One general comment though. You missed the v3 in the patch subject this time and you also missed adding the patch revision history to the patches:
http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions
No need to re-send now. But please make sure to send with a correct history next time.
Thanks,
Stefan
Quoted 13 lines
v2:
Rebase on current master. Fixes conflict with commit661c98121d4("mtd: nand:
pxa3xx: Fix not callingdev_xxxwith a device")Baruch Siach (2):
arm: dts: armada-cp110-master: update nand-controller
mtd:pxa3xx_nand: remove dead codeShmuel Hazan (3):
arm: dts: armada-cp110-slave: add missingcps_nand
mtd:pxa3xx_nand: port to use driver model
mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
Quoted 6 lines
arch/arm/dts/armada-cp110-master.dtsi | 15 ++- arch/arm/dts/armada-cp110-slave.dtsi | 16 +++ drivers/mtd/nand/raw/Kconfig | 2 + drivers/mtd/nand/raw/pxa3xx_nand.c | 180 ++++++++++++++------------ 4 files changed, 125 insertions(+), 88 deletions(-)
Viele Gr??e,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
PATCH 5/5 mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
In reply to Baruch SiachHi Baruch,
Quoted 26 lines · Baruch Siach
From: Shmuel Hazan <[email protected]>
Based on Linux kernel commit
fc256f5789cb("mtd: nand: pxa3xx: enable NAND controller if the SoC needs it"). This commit adds support for the Armada 8040 nand controller.The kernel commit says this:
Marvell recent SoCs like A7k/A8k do not boot with NAND flash controller activated by default. Enabling the controller is a matter of writing in a system controller register that may also be used for other NAND related choices.
Reviewed-by Stefan Roese <[email protected]>Signed-off-by Shmuel Hazan <[email protected]>Signed-off-by Baruch Siach <[email protected]>--- drivers/mtd/nand/raw/Kconfig | 1 + drivers/mtd/nand/raw/pxa3xx_nand.c | 52 ++++++++++++++++++++++++------ 2 files changed, 43 insertions(+), 10 deletions(-)drivers/mtd/nand/raw/Kconfig +0
-0
drivers/mtd/nand/raw/Kconfig config NAND_PXA3XX · line 199
Quoted 4 lines
drivers/mtd/nand/raw/Kconfig +1
-0@@ -196,6 +196,7 @@ config NAND_PXA3XX bool "Support for NAND on PXA3xx and Armada 370/XP/38x" select SYS_NAND_SELF_INIT select DM_MTD + select SYSCON
It seems REGMAP dependency is missing here. I get some errors while building for some MVEBU boards, like x530:
WARNING: unmet direct dependencies detected for SYSCON
Depends on [n]: REGMAP [=n]
Selected by [y]:
- NAND_PXA3XX [=y] && MTD_RAW_NAND [=y]
WARNING: unmet direct dependencies detected for SYSCON
Depends on [n]: REGMAP [=n]
Selected by [y]:
- NAND_PXA3XX [=y] && MTD_RAW_NAND [=y]
WARNING: unmet direct dependencies detected for SYSCON
Depends on [n]: REGMAP [=n]
Selected by [y]:
- NAND_PXA3XX [=y] && MTD_RAW_NAND [=y]/opt/kernel.org/gcc-10.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ld.bfd:drivers/built-in.o: in function `syscon_pre_probe':/home/stefan/git/u-boot/u-boot-marvell/drivers/core/syscon-uclass.c:64:
undefined reference to `regmap_init_mem' /opt/kernel.org/gcc-10.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ld.bfd:drivers/built-in.o: in function `alloc_nand_resource':/home/stefan/git/u-boot/u-boot-marvell/drivers/mtd/nand/raw/pxa3xx_nand.c:1840:
undefined reference to `regmap_read' /opt/kernel.org/gcc-10.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ld.bfd:/home/stefan/git/u-boot/u-boot-marvell/drivers/mtd/nand/raw/pxa3xx_nand.c:1842:
undefined reference to `regmap_write'
I'll add "select REGMAP" to this patch and re-run the world build again shortly.
Thanks,
Stefan
Quoted 140 lines
drivers/mtd/nand/raw/Kconfig +0
-0imply CMD_NAND help This enables the driver for the NAND flash device found ondrivers/mtd/nand/raw/pxa3xx_nand.c +41
-9@@ -22,6 +22,8 @@#include <linux/mtd/mtd.h> #include <linux/mtd/rawnand.h> #include <linux/types.h> +#include <syscon.h> +#include <regmap.h> #include <dm/uclass.h> #include <dm/read.h> @@ -119,6 +121,10 @@ DECLARE_GLOBAL_DATA_PTR;#define EXT_CMD_TYPE_LAST_RW 1/* Last naked read/write */ #define EXT_CMD_TYPE_MONO 0/* Monolithic read/write */ +/* System control register and bit to enable NAND on some SoCs */ +#define GENCONF_SOC_DEVICE_MUX 0x208 +#define GENCONF_SOC_DEVICE_MUX_NFC_EN BIT(0) +/* * This should be large enough to read 'ONFI' and 'JEDEC'. * Let's use 7 bytes, which is the maximum ID count supported @@ -159,6 +165,7 @@ enum {enum pxa3xx_nand_variant {PXA3XX_NAND_VARIANT_PXA ,PXA3XX_NAND_VARIANT_ARMADA370 , +PXA3XX_NAND_VARIANT_ARMADA_8K , };struct pxa3xx_nand_host {@@ -424,13 +431,16 @@ static const struct udevice_id pxa3xx_nand_dt_ids[] = { .compatible = "marvell,mvebu-pxa3xx-nand", .data = PXA3XX_NAND_VARIANT_ARMADA370, }, + { + .compatible = "marvell,armada-8k-nand-controller", + .data = PXA3XX_NAND_VARIANT_ARMADA_8K, + }, {} }; -static enum pxa3xx_nand_variant pxa3xx_nand_get_variant (void ) +static enum pxa3xx_nand_variant pxa3xx_nand_get_variant (struct udevice *dev) { -/* We only support the Armada 370/XP/38x for now */ -return PXA3XX_NAND_VARIANT_ARMADA370 ; +return dev_get_driver_data (dev); } static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,@@ -707,7 +717,8 @@ static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info) info->retcode =ERR_UNCORERR ;if (status &NDSR_CORERR ) { info->retcode =ERR_CORERR ; -if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 && +if ((info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant ==PXA3XX_NAND_VARIANT_ARMADA_8K ) && info->ecc_bch) info->ecc_err_cnt =NDSR_ERR_CNT (status);else @@ -762,7 +773,8 @@ static irqreturn_t pxa3xx_nand_irq(struct pxa3xx_nand_info *info)nand_writel (info,NDCB0 , info->ndcb2);/* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */ -if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 ) +if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant ==PXA3XX_NAND_VARIANT_ARMADA_8K )nand_writel (info,NDCB0 , info->ndcb3); }@@ -1676,7 +1688,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) }/* Device detection must be done with ECC disabled */ -if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 ) +if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant ==PXA3XX_NAND_VARIANT_ARMADA_8K )nand_writel (info,NDECCCTRL ,0x0 );if (nand_scan_ident (mtd,1 ,NULL ))@@ -1726,7 +1739,8 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)* (aka split) command handling, */ if (mtd->writesize > info->chunk_size) { -if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 ) { +if (info->variant ==PXA3XX_NAND_VARIANT_ARMADA370 || + info->variant ==PXA3XX_NAND_VARIANT_ARMADA_8K ) { chip->cmdfunc = nand_cmdfunc_extended; }else { dev_err(mtd->dev,@@ -1762,7 +1776,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)return nand_scan_tail (mtd); } -static int alloc_nand_resource (struct pxa3xx_nand_info *info) +static int alloc_nand_resource (struct udevice *dev,struct pxa3xx_nand_info *info) {struct pxa3xx_nand_platform_data *pdata;struct pxa3xx_nand_host *host;@@ -1774,7 +1788,7 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)if (pdata->num_cs <=0 )return -ENODEV ; - info->variant =pxa3xx_nand_get_variant (); + info->variant =pxa3xx_nand_get_variant (dev);for (cs =0 ; cs < pdata->num_cs; cs++) { chip = (struct nand_chip *) ((u8 *)&info[1 ] +sizeof (*host) * cs);@@ -1810,6 +1824,24 @@ static int alloc_nand_resource(struct pxa3xx_nand_info *info)/* initialize all interrupts to be disabled */ disable_int (info,NDSR_MASK ); +/* +* Some SoCs like A7k/A8k need to enable manually the NAND +* controller to avoid being bootloader dependent. This is done +* through the use of a single bit in the System Functions registers. +*/ +if (pxa3xx_nand_get_variant (dev) ==PXA3XX_NAND_VARIANT_ARMADA_8K ) { +struct regmap *sysctrl_base =syscon_regmap_lookup_by_phandle ( + dev,"marvell,system-controller" ); +u32 reg; + +if (IS_ERR (sysctrl_base)) +return PTR_ERR (sysctrl_base); + +regmap_read (sysctrl_base,GENCONF_SOC_DEVICE_MUX , ®); + reg |=GENCONF_SOC_DEVICE_MUX_NFC_EN ; +regmap_write (sysctrl_base,GENCONF_SOC_DEVICE_MUX , reg); + } +return 0 ; }
drivers/mtd/nand/raw/pxa3xx_nand.c static int pxa3xx_nand_probe(struct udevice *dev) · line 1902
Quoted 8 lines
drivers/mtd/nand/raw/pxa3xx_nand.c +1
-1@@ -1864,7 +1896,7 @@ static int pxa3xx_nand_probe(struct udevice *dev) pdata = info->pdata; - ret =alloc_nand_resource (info); + ret =alloc_nand_resource (dev, info);if (ret) {dev_err (dev,"alloc nand resource failed\n" );return ret;
Viele Gr??e,
Stefan
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
cover mtd: pxa3xx_nand: add support for Armada 8k
In reply to Baruch SiachQuoted 21 lines · Baruch Siach
This series adds NAND flash support to Aramda 8k systems. Patches make the necessary changes to the
pxa3xx_nanddriver and DT files.v3:
Address Stefan's comments on patch #3Move hunks from patch #3 to #5 to fix bisectability
v2:
Rebase on current master. Fixes conflict with commit661c98121d4("mtd: nand:
pxa3xx: Fix not callingdev_xxxwith a device")Baruch Siach (2):
arm: dts: armada-cp110-master: update nand-controller
mtd:pxa3xx_nand: remove dead codeShmuel Hazan (3):
arm: dts: armada-cp110-slave: add missingcps_nand
mtd:pxa3xx_nand: port to use driver model
mtd: nand: pxa3xx: enable NAND controller if the SoC needs it
Quoted 6 lines
arch/arm/dts/armada-cp110-master.dtsi | 15 ++- arch/arm/dts/armada-cp110-slave.dtsi | 16 +++ drivers/mtd/nand/raw/Kconfig | 2 + drivers/mtd/nand/raw/pxa3xx_nand.c | 180 ++++++++++++++------------ 4 files changed, 125 insertions(+), 88 deletions(-)
Applied to u-boot-marvell/master
Thanks,
Stefan