microblaze: Cleanup series
v2 cover microblaze: Cleanup series
Hi,
I looked at microblaze configs and clean up some things. All changes were done in connection to detect nor flash based on information taken from DT.
Thanks
Michal
Changes in v2:
- Rework the whole patch because SPL_NOR is enabled by default.
Michal Simek (6):
microblaze: Clean config file from ifdef mess
microblaze: Simplify cache handling
microblaze: Get rid of xparameters.h
microblaze: Remove CONFIG_SYS_FDT_SIZE
microblaze: Unify of setting for SPL_NOR/XIP support
microblaze: Detect NOR flash based on DT
board/xilinx/microblaze-generic/xparameters.h | 18 ---- configs/microblaze-generic_defconfig | 2 + include/configs/microblaze-generic.h | 87 ++----------------- scripts/config_whitelist.txt | 1 - 4 files changed, 11 insertions(+), 97 deletions(-) delete mode 100644 board/xilinx/microblaze-generic/xparameters.h
Signature · 1 line
2.29.2
PATCH v2 1/6 microblaze: Clean config file from ifdef mess
A lot of configs has been moved to Kconfig and it ends up in ifdef mess with no bodies. That's why remove all of them.
---
(no changes since v1)
include/configs/microblaze-generic.h | 24 ------------------------ 1 file changed, 24 deletions(-)
include/configs/microblaze-generic.h +0 -24
@@ -67,24 +67,6 @@# define CONFIG_SYS_MAX_FLASH_BANKS 1/* max number of sectors on one chip */ # define CONFIG_SYS_MAX_FLASH_SECT 512 -/* hardware flash protection */ -/* use buffered writes (20x faster) */ -# ifdef RAMENV -# else /* FLASH && !RAMENV */ -/* 128K(one sector) for env */ -# endif /* FLASH && !RAMBOOT */ -#else /* !FLASH */ - -#ifdef SPIFLASH -# ifdef RAMENV -# else /* SPIFLASH && !RAMENV */ -/* 128K(two sectors) for env */ -/* Warning: adjust the offset in respect of other flash content and size */ -# endif /* SPIFLASH && !RAMBOOT */ -#else /* !SPIFLASH */ - -/* ENV in RAM */ -#endif /* !SPIFLASH */ #endif /* !FLASH */ #define XILINX_USE_ICACHE 1
@@ -111,12 +93,6 @@*/ #define CONFIG_BOOTP_BOOTFILESIZE -#if defined(CONFIG_MTD_PARTITIONS ) -/* MTD partitions */ - -/* default mtd partition table */ -#endif -/* size of console buffer */ #define CONFIG_SYS_CBSIZE 512/* max number of command args */
Signature · 1 line
2.29.2
PATCH v2 2/6 microblaze: Simplify cache handling
In reply to Michal SimekEnable caches by default. For now just simplify config file but it should be read from DT or PVRs.
---
(no changes since v1)
include/configs/microblaze-generic.h | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-)
include/configs/microblaze-generic.h +2 -14
@@ -69,20 +69,8 @@# define CONFIG_SYS_MAX_FLASH_SECT 512#endif /* !FLASH */ -#define XILINX_USE_ICACHE 1 -#define XILINX_USE_DCACHE 1 - -#if defined(XILINX_USE_ICACHE ) -# define CONFIG_ICACHE -#else -# undef CONFIG_ICACHE -#endif - -#if defined(XILINX_USE_DCACHE ) -# define CONFIG_DCACHE -#else -# undef CONFIG_DCACHE -#endif +#define CONFIG_ICACHE +#define CONFIG_DCACHE #ifndef XILINX_DCACHE_BYTE_SIZE #define XILINX_DCACHE_BYTE_SIZE 32768
Signature · 1 line
2.29.2
PATCH v2 3/6 microblaze: Get rid of xparameters.h
In reply to Michal SimekThere is no need to use this file anymore. Include it in main config file and simplify logic based on it.
---
(no changes since v1)
board/xilinx/microblaze-generic/xparameters.h | 18 ------------------ include/configs/microblaze-generic.h | 7 ++++++- 2 files changed, 6 insertions(+), 19 deletions(-) delete mode 100644 board/xilinx/microblaze-generic/xparameters.h
board/xilinx/microblaze-generic/xparameters.h deleted +0 -18
@@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2007 Michal Simek -* -* Michal SIMEK <[email protected]> -* -* CAUTION: This file is a faked configuration !!! -* There is no real target for the microblaze-generic -* configuration. You have to replace this file with -* the generated file from your Xilinx design flow. -*/ - -/* Microblaze is microblaze_0 */ -#define XILINX_FSL_NUMBER 3 - -/* Flash Memory is FLASH_2Mx32 */ -#define XILINX_FLASH_START 0x2c000000 -#define XILINX_FLASH_SIZE 0x00800000
include/configs/microblaze-generic.h +6 -1
@@ -8,7 +8,12 @@#ifndef __CONFIG_H#define __CONFIG_H -#include "../board/xilinx/microblaze-generic/xparameters.h" +/* Microblaze is microblaze_0 */ +#define XILINX_FSL_NUMBER 3 + +/* Flash Memory is FLASH_2Mx32 */ +#define XILINX_FLASH_START 0x2c000000 +#define XILINX_FLASH_SIZE 0x00800000/* MicroBlaze CPU */ #define MICROBLAZE_V5 1
Signature · 1 line
2.29.2
PATCH v2 4/6 microblaze: Remove CONFIG_SYS_FDT_SIZE
In reply to Michal SimekCONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it.
---
(no changes since v1)
include/configs/microblaze-generic.h | 1 - scripts/config_whitelist.txt | 1 - 2 files changed, 2 deletions(-)
include/configs/microblaze-generic.h +0 -1
@@ -171,7 +171,6 @@#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ 0x40000) -#define CONFIG_SYS_FDT_SIZE (16 << 10)#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ 0x1000000)
scripts/config_whitelist.txt +0 -1
@@ -2170,7 +2170,6 @@ CONFIG_SYS_FCC_PSMR CONFIG_SYS_FDT_BASE CONFIG_SYS_FDT_LOAD_ADDR CONFIG_SYS_FDT_PAD -CONFIG_SYS_FDT_SIZE CONFIG_SYS_FEC0_IOBASE CONFIG_SYS_FEC1_IOBASE CONFIG_SYS_FECI2C
Signature · 1 line
2.29.2
PATCH v2 5/6 microblaze: Unify of setting for SPL_NOR/XIP support
In reply to Michal SimekXIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with using SYS_FLASH_BASE are wrong because it is not aligned with DM. That's why change these macro and align them with TEXT_BASE macro. Information should be find at run time based on DT but implementation is not done yet.
---
Changes in v2:
- Rework the whole patch because SPL_NOR is enabled by default.
include/configs/microblaze-generic.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
include/configs/microblaze-generic.h +3 -5
@@ -163,14 +163,12 @@/* SPL part */ -#ifdef CONFIG_SYS_FLASH_BASE -# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE -#endif +#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE/* for booting directly linux */ +#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_TEXT_BASE + \ + 0x40000) -#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \ - 0x40000)#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \ 0x1000000)
Signature · 1 line
2.29.2
PATCH v2 6/6 microblaze: Detect NOR flash based on DT
In reply to Michal SimekRemove fixed configuration and detect flash based on DT.
Also increase amount of flash sectors to 2048 because on kc705 flash has 1027 sectors.
Bank # 1: CFI conformant flash (16 x 16) Size: 128 MB in 1027 Sectors
Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962 Erase timeout: 4096 ms, write timeout: 2 ms
Buffer write timeout: 5 ms, buffer size: 1024 bytes
---
(no changes since v1)
configs/microblaze-generic_defconfig | 2 ++ include/configs/microblaze-generic.h | 41 ++-------------------------- 2 files changed, 5 insertions(+), 38 deletions(-)
configs/microblaze-generic_defconfig +2 -0
@@ -48,8 +48,10 @@ CONFIG_DM_I2C=y CONFIG_LED=y CONFIG_LED_GPIO=y CONFIG_MTD=y +CONFIG_DM_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y +CONFIG_CFI_FLASH=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_FLASH_CFI_MTD=y CONFIG_SYS_FLASH_PROTECTION=y
include/configs/microblaze-generic.h +3 -38
63 lines not on this page · raw message
Signature · 1 line
2.29.2
Michal Simek
Appliedv2 cover microblaze: Cleanup series
In reply to Michal Simekpo 16. 11. 2020 v 16:02 odes?latel Michal Simek
<[email protected]> napsal:
Quoted 27 lines
Hi,
I looked at microblaze configs and clean up some things. All changes were done in connection to detect nor flash based on information taken from DT.
Thanks
MichalChanges in v2:
- Rework the whole patch becauseSPL_NORis enabled by default.Michal Simek (6):
microblaze: Clean config file from ifdef mess
microblaze: Simplify cache handling
microblaze: Get rid ofxparameters.h
microblaze: RemoveCONFIG_SYS_FDT_SIZE
microblaze: Unify of setting for SPL_NOR/XIP support
microblaze: Detect NOR flash based on DTboard/xilinx/microblaze-generic/xparameters.h | 18 ---- configs/microblaze-generic_defconfig | 2 + include/configs/microblaze-generic.h | 87 ++----------------- scripts/config_whitelist.txt | 1 - 4 files changed, 11 insertions(+), 97 deletions(-) delete mode 100644 board/xilinx/microblaze-generic/xparameters.h
Quoted 3 lines
--
2.29.2
Applied.
M
Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs