docs: avoid using ReST :doc:`foo` tag
Subsystems (26)
PATCH v2 2/29 docs: dev-tools: kunit: don't use a table for docs name
In reply to Mauro Carvalho ChehabWe'll be replacing :doc:foo references to Documentation/foo.rst. Yet, here it happens inside a table. Doing a search-and-replace would break it.
Yet, as there's no good reason to use a table there, let's just convert it into a list.
--- Documentation/dev-tools/kunit/api/index.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/dev-tools/kunit/api/index.rst +4 -4
@@ -10,7 +10,7 @@ API Reference This section documents the KUnit kernel testing API. It is divided into the following sections: -================================= ============================================== -:doc:`test` documents all of the standard testing API - excluding mocking or mocking related features. -================================= ============================================== +Documentation/dev-tools/kunit/api/test.rst + + - documents all of the standard testing API excluding mocking + or mocking related features.
Signature · 1 line
2.31.1
PATCH v2 4/29 docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- .../hw-vuln/special-register-buffer-data-sampling.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +2 -1
@@ -3,7 +3,8 @@ SRBDS - Special Register Buffer Data Sampling ============================================= -SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to +SRBDS is a hardware vulnerability that allows MDS +Documentation/admin-guide/hw-vuln/mds.rst techniques to infer values returned from special register accesses. Special register accesses are accesses to off core registers. According to Intel's evaluation, the special register reads that have a security expectation of privacy are
Signature · 1 line
2.31.1
v2 cover docs: avoid using ReST :doc:`foo` tag
(Maintainers bcc, to avoid too many recipient troubles)
As discussed at:
https://lore.kernel.org/linux-doc/[email protected]/
It is better to avoid using :doc:foo to refer to Documentation/foo.rst, as the automarkup.py extension should handle it automatically, on most cases.
There are a couple of exceptions to this rule:
1. when :doc: tag is used to point to a kernel-doc DOC: markup;
2. when it is used with a named tag, e. g. :doc:some name <foo>;
On this series:
Patch 1 manually adjust the references inside driver-api/pm/devices.rst, as there it uses :file:foo to refer to some Documentation/ files;
Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst into a list, carefully avoiding the
The remaining patches convert the other occurrences via a replace script. They were manually edited, in order to honour 80-columns where possible.
This series based on docs-next branch. In order to avoid merge conflicts, I rebased it internally against yesterday's linux-next, dropping a patch and a hunk that would have caused conflicts there.
I'll re-send the remaining patch (plus another patch) with conflicting changes, together with any other doc:filename reference that might still be upstream by 5.14-rc1.
---
v2:
- dropped media patches (as I merged via my own tree);
- removed one patch that would conflict at linux-next (adm1177.rst);
- removed one hunk fron kunit patch that would also conflict at linux-next.
Mauro Carvalho Chehab (29):
docs: devices.rst: better reference documentation docs
docs: dev-tools: kunit: don't use a table for docs name
docs: admin-guide: pm: avoid using ReST :doc:foo markup
docs: admin-guide: hw-vuln: avoid using ReST :doc:foo markup
docs: admin-guide: sysctl: avoid using ReST :doc:foo markup
docs: block: biodoc.rst: avoid using ReST :doc:foo markup
docs: bpf: bpf_lsm.rst: avoid using ReST :doc:foo markup
docs: core-api: avoid using ReST :doc:foo markup
docs: dev-tools: testing-overview.rst: avoid using ReST :doc:foo
markup
docs: dev-tools: kunit: avoid using ReST :doc:foo markup
docs: devicetree: bindings: submitting-patches.rst: avoid using ReST
:doc:foo markup
docs: doc-guide: avoid using ReST :doc:foo markup
docs: driver-api: avoid using ReST :doc:foo markup
docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:foo
markup
docs: driver-api: surface_aggregator: avoid using ReST :doc:foo
markup
docs: driver-api: usb: avoid using ReST :doc:foo markup
docs: firmware-guide: acpi: avoid using ReST :doc:foo markup
docs: i2c: avoid using ReST :doc:foo markup
docs: kernel-hacking: hacking.rst: avoid using ReST :doc:foo markup
docs: networking: devlink: avoid using ReST :doc:foo markup
docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:foo
markup
docs: PCI: pci.rst: avoid using ReST :doc:foo markup
docs: process: submitting-patches.rst: avoid using ReST :doc:foo
markup
docs: security: landlock.rst: avoid using ReST :doc:foo markup
docs: trace: coresight: coresight.rst: avoid using ReST :doc:foo
markup
docs: trace: ftrace.rst: avoid using ReST :doc:foo markup
docs: userspace-api: landlock.rst: avoid using ReST :doc:foo markup
docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:foo markup
docs: x86: avoid using ReST :doc:foo markup
.../PCI/endpoint/pci-endpoint-cfs.rst | 2 +- Documentation/PCI/pci.rst | 6 +-- .../special-register-buffer-data-sampling.rst | 3 +- Documentation/admin-guide/pm/intel_idle.rst | 16 +++++--- Documentation/admin-guide/pm/intel_pstate.rst | 9 +++-- Documentation/admin-guide/sysctl/abi.rst | 2 +- Documentation/admin-guide/sysctl/kernel.rst | 37 ++++++++++--------- Documentation/block/biodoc.rst | 2 +- Documentation/bpf/bpf_lsm.rst | 13 ++++--- .../core-api/bus-virt-phys-mapping.rst | 2 +- Documentation/core-api/dma-api.rst | 5 ++- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/core-api/index.rst | 4 +- Documentation/dev-tools/kunit/api/index.rst | 8 ++-- Documentation/dev-tools/kunit/faq.rst | 2 +- Documentation/dev-tools/kunit/index.rst | 14 +++---- Documentation/dev-tools/kunit/start.rst | 4 +- Documentation/dev-tools/kunit/tips.rst | 5 ++- Documentation/dev-tools/kunit/usage.rst | 8 ++-- Documentation/dev-tools/testing-overview.rst | 16 ++++---- .../bindings/submitting-patches.rst | 11 +++--- Documentation/doc-guide/contributing.rst | 8 ++-- Documentation/driver-api/gpio/using-gpio.rst | 4 +- Documentation/driver-api/ioctl.rst | 2 +- Documentation/driver-api/pm/devices.rst | 8 ++-- .../surface_aggregator/clients/index.rst | 3 +- .../surface_aggregator/internal.rst | 15 ++++---- .../surface_aggregator/overview.rst | 6 ++- Documentation/driver-api/usb/dma.rst | 6 +-- .../acpi/dsd/data-node-references.rst | 3 +- .../firmware-guide/acpi/dsd/graph.rst | 2 +- .../firmware-guide/acpi/enumeration.rst | 7 ++-- Documentation/i2c/instantiating-devices.rst | 2 +- Documentation/i2c/old-module-parameters.rst | 3 +- Documentation/i2c/smbus-protocol.rst | 4 +- Documentation/kernel-hacking/hacking.rst | 4 +- .../networking/devlink/devlink-region.rst | 2 +- .../networking/devlink/devlink-trap.rst | 4 +- Documentation/process/submitting-patches.rst | 32 ++++++++-------- Documentation/security/landlock.rst | 3 +- Documentation/trace/coresight/coresight.rst | 8 ++-- Documentation/trace/ftrace.rst | 2 +- Documentation/userspace-api/landlock.rst | 11 +++--- Documentation/virt/kvm/s390-pv-boot.rst | 2 +- Documentation/x86/boot.rst | 4 +- Documentation/x86/mtrr.rst | 2 +- 46 files changed, 171 insertions(+), 147 deletions(-)
Signature · 1 line
2.31.1
PATCH v2 6/29 docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup
The :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/block/biodoc.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/block/biodoc.rst +1 -1
@@ -196,7 +196,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address do not have a corresponding kernel virtual address space mapping) and low-memory pages. -Note: Please refer to :doc:`/core-api/dma-api-howto` for a discussion +Note: Please refer to Documentation/core-api/dma-api-howto.rst for a discussion on PCI high mem DMA aspects and mapping of scatter gather lists, and support for 64 bit PCI.
Signature · 1 line
2.31.1
PATCH v2 3/29 docs: admin-guide: pm: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/admin-guide/pm/intel_idle.rst | 16 ++++++++++------ Documentation/admin-guide/pm/intel_pstate.rst | 9 +++++---- 2 files changed, 15 insertions(+), 10 deletions(-)
Documentation/admin-guide/pm/intel_idle.rst +10 -6
@@ -20,8 +20,8 @@ Nehalem and later generations of Intel processors, but the level of support for a particular processor model in it depends on whether or not it recognizes that processor model and may also depend on information coming from the platform firmware. [To understand ``intel_idle`` it is necessary to know how ``CPUIdle`` -works in general, so this is the time to get familiar with :doc:`cpuidle` if you -have not done that yet.] +works in general, so this is the time to get familiar with +Documentation/admin-guide/pm/cpuidle.rst if you have not done that yet.] ``intel_idle`` uses the ``MWAIT`` instruction to inform the processor that the logical CPU executing it is idle and so it may be possible to put some of the
@@ -53,7 +53,8 @@ processor) corresponding to them depends on the processor model and it may also depend on the configuration of the platform. In order to create a list of available idle states required by the ``CPUIdle`` -subsystem (see :ref:`idle-states-representation` in :doc:`cpuidle`), +subsystem (see :ref:`idle-states-representation` in +Documentation/admin-guide/pm/cpuidle.rst), ``intel_idle`` can use two sources of information: static tables of idle states for different processor models included in the driver itself and the ACPI tables of the system. The former are always used if the processor model at hand is
@@ -98,7 +99,8 @@ states may not be enabled by default if there are no matching entries in the preliminary list of idle states coming from the ACPI tables. In that case user space still can enable them later (on a per-CPU basis) with the help of the ``disable`` idle state attribute in ``sysfs`` (see -:ref:`idle-states-representation` in :doc:`cpuidle`). This basically means that +:ref:`idle-states-representation` in +Documentation/admin-guide/pm/cpuidle.rst). This basically means that the idle states "known" to the driver may not be enabled by default if they have not been exposed by the platform firmware (through the ACPI tables).
@@ -186,7 +188,8 @@ be desirable. In practice, it is only really necessary to do that if the idle states in question cannot be enabled during system startup, because in the working state of the system the CPU power management quality of service (PM QoS) feature can be used to prevent ``CPUIdle`` from touching those idle states -even if they have been enumerated (see :ref:`cpu-pm-qos` in :doc:`cpuidle`). +even if they have been enumerated (see :ref:`cpu-pm-qos` in +Documentation/admin-guide/pm/cpuidle.rst). Setting ``max_cstate`` to 0 causes the ``intel_idle`` initialization to fail. The ``no_acpi`` and ``use_acpi`` module parameters (recognized by ``intel_idle``
@@ -202,7 +205,8 @@ Namely, the positions of the bits that are set in the ``states_off`` value are the indices of idle states to be disabled by default (as reflected by the names of the corresponding idle state directories in ``sysfs``, :file:`state0`, :file:`state1` ... :file:`state<i>` ..., where ``<i>`` is the index of the given -idle state; see :ref:`idle-states-representation` in :doc:`cpuidle`). +idle state; see :ref:`idle-states-representation` in +Documentation/admin-guide/pm/cpuidle.rst). For example, if ``states_off`` is equal to 3, the driver will disable idle states 0 and 1 by default, and if it is equal to 8, idle state 3 will be
Documentation/admin-guide/pm/intel_pstate.rst +5 -4
@@ -18,8 +18,8 @@ General Information (``CPUFreq``). It is a scaling driver for the Sandy Bridge and later generations of Intel processors. Note, however, that some of those processors may not be supported. [To understand ``intel_pstate`` it is necessary to know -how ``CPUFreq`` works in general, so this is the time to read :doc:`cpufreq` if -you have not done that yet.] +how ``CPUFreq`` works in general, so this is the time to read +Documentation/admin-guide/pm/cpufreq.rst if you have not done that yet.] For the processors supported by ``intel_pstate``, the P-state concept is broader than just an operating frequency or an operating performance point (see the
@@ -445,8 +445,9 @@ Interpretation of Policy Attributes ----------------------------------- The interpretation of some ``CPUFreq`` policy attributes described in -:doc:`cpufreq` is special with ``intel_pstate`` as the current scaling driver -and it generally depends on the driver's `operation mode <Operation Modes_>`_. +Documentation/admin-guide/pm/cpufreq.rst is special with ``intel_pstate`` +as the current scaling driver and it generally depends on the driver's +`operation mode <Operation Modes_>`_. First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and ``scaling_cur_freq`` attributes are produced by applying a processor-specific
Signature · 1 line
2.31.1
PATCH v2 8/29 docs: core-api: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/core-api/bus-virt-phys-mapping.rst | 2 +- Documentation/core-api/dma-api.rst | 5 +++-- Documentation/core-api/dma-isa-lpc.rst | 2 +- Documentation/core-api/index.rst | 4 ++-- 4 files changed, 7 insertions(+), 6 deletions(-)
Documentation/core-api/bus-virt-phys-mapping.rst +1 -1
@@ -8,7 +8,7 @@ How to access I/O mapped memory from within device drivers The virt_to_bus() and bus_to_virt() functions have been superseded by the functionality provided by the PCI DMA interface - (see :doc:`/core-api/dma-api-howto`). They continue + (see Documentation/core-api/dma-api-howto.rst). They continue to be documented below for historical purposes, but new code must not use them. --davidm 00/12/12
Documentation/core-api/dma-api.rst +3 -2
@@ -5,7 +5,7 @@ Dynamic DMA mapping using the generic device :Author: James E.J. Bottomley <[email protected]> This document describes the DMA API. For a more gentle introduction -of the API (and actual examples), see :doc:`/core-api/dma-api-howto`. +of the API (and actual examples), see Documentation/core-api/dma-api-howto.rst. This API is split into two pieces. Part I describes the basic API. Part II describes extensions for supporting non-consistent memory
@@ -479,7 +479,8 @@ without the _attrs suffixes, except that they pass an optional dma_attrs. The interpretation of DMA attributes is architecture-specific, and -each attribute should be documented in :doc:`/core-api/dma-attributes`. +each attribute should be documented in +Documentation/core-api/dma-attributes.rst. If dma_attrs are 0, the semantics of each of these functions is identical to those of the corresponding function
Documentation/core-api/dma-isa-lpc.rst +1 -1
@@ -17,7 +17,7 @@ To do ISA style DMA you need to include two headers:: #include <asm/dma.h> The first is the generic DMA API used to convert virtual addresses to -bus addresses (see :doc:`/core-api/dma-api` for details). +bus addresses (see Documentation/core-api/dma-api.rst for details). The second contains the routines specific to ISA DMA transfers. Since this is not present on all platforms make sure you construct your
Documentation/core-api/index.rst +2 -2
@@ -48,7 +48,7 @@ Concurrency primitives ====================== How Linux keeps everything from happening at the same time. See -:doc:`/locking/index` for more related documentation. +Documentation/locking/index.rst for more related documentation. .. toctree:: :maxdepth: 1
@@ -77,7 +77,7 @@ Memory management ================= How to allocate and use memory in the kernel. Note that there is a lot -more memory-management documentation in :doc:`/vm/index`. +more memory-management documentation in Documentation/vm/index.rst. .. toctree:: :maxdepth: 1
Signature · 1 line
2.31.1
PATCH v2 5/29 docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/admin-guide/sysctl/abi.rst | 2 +- Documentation/admin-guide/sysctl/kernel.rst | 37 +++++++++++---------- 2 files changed, 21 insertions(+), 18 deletions(-)
Documentation/admin-guide/sysctl/abi.rst +1 -1
@@ -11,7 +11,7 @@ Documentation for /proc/sys/abi/ Copyright (c) 2020, Stephen Kitt -For general info, see :doc:`index`. +For general info, see Documentation/admin-guide/sysctl/index.rst. ------------------------------------------------------------------------------
Documentation/admin-guide/sysctl/kernel.rst +20 -17
@@ -9,7 +9,8 @@ Copyright (c) 1998, 1999, Rik van Riel <[email protected]> Copyright (c) 2009, Shen Feng<[email protected]> -For general info and legal blurb, please look in :doc:`index`. +For general info and legal blurb, please look in +Documentation/admin-guide/sysctl/index.rst. ------------------------------------------------------------------------------
@@ -54,7 +55,7 @@ free space valid for 30 seconds. acpi_video_flags ================ -See :doc:`/power/video`. This allows the video resume mode to be set, +See Documentation/power/video.rst. This allows the video resume mode to be set, in a similar fashion to the ``acpi_sleep`` kernel parameter, by combining the following values:
@@ -89,7 +90,7 @@ is 0x15 and the full version number is 0x234, this file will contain the value 340 = 0x154. See the ``type_of_loader`` and ``ext_loader_type`` fields in -:doc:`/x86/boot` for additional information. +Documentation/x86/boot.rst for additional information. bootloader_version (x86 only)
@@ -99,7 +100,7 @@ The complete bootloader version number. In the example above, this file will contain the value 564 = 0x234. See the ``type_of_loader`` and ``ext_loader_ver`` fields in -:doc:`/x86/boot` for additional information. +Documentation/x86/boot.rst for additional information. bpf_stats_enabled
@@ -269,7 +270,7 @@ see the ``hostname(1)`` man page. firmware_config =============== -See :doc:`/driver-api/firmware/fallback-mechanisms`. +See Documentation/driver-api/firmware/fallback-mechanisms.rst. The entries in this directory allow the firmware loader helper fallback to be controlled:
@@ -297,7 +298,7 @@ crashes and outputting them to a serial console. ftrace_enabled, stack_tracer_enabled ==================================== -See :doc:`/trace/ftrace`. +See Documentation/trace/ftrace.rst. hardlockup_all_cpu_backtrace
@@ -325,7 +326,7 @@ when a hard lockup is detected. 1 Panic on hard lockup. = =========================== -See :doc:`/admin-guide/lockup-watchdogs` for more information. +See Documentation/admin-guide/lockup-watchdogs.rst for more information. This can also be set using the nmi_watchdog kernel parameter.
@@ -586,7 +587,8 @@ in a KVM virtual machine. This default can be overridden by adding:: nmi_watchdog=1 -to the guest kernel command line (see :doc:`/admin-guide/kernel-parameters`). +to the guest kernel command line (see +Documentation/admin-guide/kernel-parameters.rst). numa_balancing
@@ -1071,7 +1073,7 @@ that support this feature. real-root-dev ============= -See :doc:`/admin-guide/initrd`. +See Documentation/admin-guide/initrd.rst. reboot-cmd (SPARC only)
@@ -1158,7 +1160,7 @@ will take effect. seccomp ======= -See :doc:`/userspace-api/seccomp_filter`. +See Documentation/userspace-api/seccomp_filter.rst. sg-big-buff
@@ -1329,7 +1331,7 @@ the boot PROM. sysrq ===== -See :doc:`/admin-guide/sysrq`. +See Documentation/admin-guide/sysrq.rst. tainted
@@ -1359,15 +1361,16 @@ ORed together. The letters are seen in "Tainted" line of Oops reports. 131072 `(T)` The kernel was built with the struct randomization plugin ====== ===== ============================================================== -See :doc:`/admin-guide/tainted-kernels` for more information. +See Documentation/admin-guide/tainted-kernels.rst for more information. Note: writes to this sysctl interface will fail with ``EINVAL`` if the kernel is booted with the command line option ``panic_on_taint=<bitmask>,nousertaint`` and any of the ORed together values being written to ``tainted`` match with the bitmask declared on panic_on_taint. - See :doc:`/admin-guide/kernel-parameters` for more details on that particular - kernel command line option and its optional ``nousertaint`` switch. + See Documentation/admin-guide/kernel-parameters.rst for more details on + that particular kernel command line option and its optional + ``nousertaint`` switch. threads-max ===========
@@ -1391,7 +1394,7 @@ If a value outside of this range is written to ``threads-max`` an traceoff_on_warning =================== -When set, disables tracing (see :doc:`/trace/ftrace`) when a +When set, disables tracing (see Documentation/trace/ftrace.rst) when a ``WARN()`` is hit.
@@ -1411,8 +1414,8 @@ will send them to printk() again. This only works if the kernel was booted with ``tp_printk`` enabled. -See :doc:`/admin-guide/kernel-parameters` and -:doc:`/trace/boottime-trace`. +See Documentation/admin-guide/kernel-parameters.rst and +Documentation/trace/boottime-trace.rst. .. _unaligned-dump-stack:
Signature · 1 line
2.31.1
PATCH v2 7/29 docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/bpf/bpf_lsm.rst | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
Documentation/bpf/bpf_lsm.rst +7 -6
@@ -20,10 +20,10 @@ LSM hook: Other LSM hooks which can be instrumented can be found in ``include/linux/lsm_hooks.h``. -eBPF programs that use :doc:`/bpf/btf` do not need to include kernel headers -for accessing information from the attached eBPF program's context. They can -simply declare the structures in the eBPF program and only specify the fields -that need to be accessed. +eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel +headers for accessing information from the attached eBPF program's context. +They can simply declare the structures in the eBPF program and only specify +the fields that need to be accessed. .. code-block:: c
@@ -88,8 +88,9 @@ example: The ``__attribute__((preserve_access_index))`` is a clang feature that allows the BPF verifier to update the offsets for the access at runtime using the -:doc:`/bpf/btf` information. Since the BPF verifier is aware of the types, it -also validates all the accesses made to the various types in the eBPF program. +Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the +types, it also validates all the accesses made to the various types in the +eBPF program. Loading -------
Signature · 1 line
2.31.1
PATCH v2 9/29 docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/dev-tools/testing-overview.rst | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
Documentation/dev-tools/testing-overview.rst +8 -8
@@ -71,15 +71,15 @@ can be used to verify that a test is executing particular functions or lines of code. This is useful for determining how much of the kernel is being tested, and for finding corner-cases which are not covered by the appropriate test. -:doc:`gcov` is GCC's coverage testing tool, which can be used with the kernel -to get global or per-module coverage. Unlike KCOV, it does not record per-task -coverage. Coverage data can be read from debugfs, and interpreted using the -usual gcov tooling. +Documentation/dev-tools/gcov.rst is GCC's coverage testing tool, which can be +used with the kernel to get global or per-module coverage. Unlike KCOV, it +does not record per-task coverage. Coverage data can be read from debugfs, +and interpreted using the usual gcov tooling. -:doc:`kcov` is a feature which can be built in to the kernel to allow -capturing coverage on a per-task level. It's therefore useful for fuzzing and -other situations where information about code executed during, for example, a -single syscall is useful. +Documentation/dev-tools/kcov.rst is a feature which can be built in to the +kernel to allow capturing coverage on a per-task level. It's therefore useful +for fuzzing and other situations where information about code executed during, +for example, a single syscall is useful. Dynamic Analysis Tools
Signature · 1 line
2.31.1
PATCH v2 22/29 docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/PCI/pci.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/PCI/pci.rst +3 -3
@@ -265,7 +265,7 @@ Set the DMA mask size --------------------- .. note:: If anything below doesn't make sense, please refer to - :doc:`/core-api/dma-api`. This section is just a reminder that + Documentation/core-api/dma-api.rst. This section is just a reminder that drivers need to indicate DMA capabilities of the device and is not an authoritative source for DMA interfaces.
@@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are Setup shared control data ------------------------- Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared) -memory. See :doc:`/core-api/dma-api` for a full description of +memory. See Documentation/core-api/dma-api.rst for a full description of the DMA APIs. This section is just a reminder that it needs to be done before enabling DMA on the device.
@@ -421,7 +421,7 @@ owners if there is one. Then clean up "consistent" buffers which contain the control data. -See :doc:`/core-api/dma-api` for details on unmapping interfaces. +See Documentation/core-api/dma-api.rst for details on unmapping interfaces. Unregister from other subsystems
Signature · 1 line
2.31.1
PATCH v2 20/29 docs: networking: devlink: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/networking/devlink/devlink-region.rst | 2 +- Documentation/networking/devlink/devlink-trap.rst | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
Documentation/networking/devlink/devlink-region.rst +1 -1
@@ -22,7 +22,7 @@ The major benefit to creating a region is to provide access to internal address regions that are otherwise inaccessible to the user. Regions may also be used to provide an additional way to debug complex error -states, but see also :doc:`devlink-health` +states, but see also Documentation/networking/devlink/devlink-health.rst Regions may optionally support capturing a snapshot on demand via the ``DEVLINK_CMD_REGION_NEW`` netlink message. A driver wishing to allow
Documentation/networking/devlink/devlink-trap.rst +2 -2
@@ -495,8 +495,8 @@ help debug packet drops caused by these exceptions. The following list includes links to the description of driver-specific traps registered by various device drivers: - * :doc:`netdevsim` - * :doc:`mlxsw` + * Documentation/networking/devlink/netdevsim.rst + * Documentation/networking/devlink/mlxsw.rst .. _Generic-Packet-Trap-Groups:
Signature · 1 line
2.31.1
PATCH v2 21/29 docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/PCI/endpoint/pci-endpoint-cfs.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/PCI/endpoint/pci-endpoint-cfs.rst +1 -1
@@ -125,4 +125,4 @@ all the EPF devices are created and linked with the EPC device. | interrupt_pin | function -[1] :doc:`pci-endpoint` +[1] Documentation/PCI/endpoint/pci-endpoint.rst
Signature · 1 line
2.31.1
PATCH v2 28/29 docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/virt/kvm/s390-pv-boot.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/virt/kvm/s390-pv-boot.rst +1 -1
@@ -10,7 +10,7 @@ The memory of Protected Virtual Machines (PVMs) is not accessible to I/O or the hypervisor. In those cases where the hypervisor needs to access the memory of a PVM, that memory must be made accessible. Memory made accessible to the hypervisor will be encrypted. See -:doc:`s390-pv` for details." +Documentation/virt/kvm/s390-pv.rst for details." On IPL (boot) a small plaintext bootloader is started, which provides information about the encrypted components and necessary metadata to
Signature · 1 line
2.31.1
PATCH v2 23/29 docs: process: submitting-patches.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/process/submitting-patches.rst | 32 +++++++++----------- 1 file changed, 15 insertions(+), 17 deletions(-)
Documentation/process/submitting-patches.rst +15 -17
@@ -10,10 +10,11 @@ can greatly increase the chances of your change being accepted. This document contains a large number of suggestions in a relatively terse format. For detailed information on how the kernel development process -works, see :doc:`development-process`. Also, read :doc:`submit-checklist` +works, see Documentation/process/development-process.rst. Also, read +Documentation/process/submit-checklist.rst for a list of items to check before submitting code. If you are submitting -a driver, also read :doc:`submitting-drivers`; for device tree binding patches, -read :doc:`submitting-patches`. +a driver, also read Documentation/process/submitting-drivers.rst; for device +tree binding patches, read Documentation/process/submitting-patches.rst. This documentation assumes that you're using ``git`` to prepare your patches. If you're unfamiliar with ``git``, you would be well-advised to learn how to
@@ -178,8 +179,7 @@ Style-check your changes ------------------------ Check your patch for basic style violations, details of which can be -found in -:ref:`Documentation/process/coding-style.rst <codingstyle>`. +found in Documentation/process/coding-style.rst. Failure to do so simply wastes the reviewers time and will get your patch rejected, probably without even being read.
@@ -238,7 +238,7 @@ If you have a patch that fixes an exploitable security bug, send that patch to [email protected]. For severe bugs, a short embargo may be considered to allow distributors to get the patch out to users; in such cases, obviously, the patch should not be sent to any public lists. See also -:doc:`/admin-guide/security-bugs`. +Documentation/admin-guide/security-bugs.rst. Patches that fix a severe bug in a released kernel should be directed toward the stable maintainers by putting a line like this::
@@ -246,9 +246,8 @@ toward the stable maintainers by putting a line like this:: Cc: [email protected] into the sign-off area of your patch (note, NOT an email recipient). You -should also read -:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` -in addition to this file. +should also read Documentation/process/stable-kernel-rules.rst +in addition to this document. If changes affect userland-kernel interfaces, please send the MAN-PAGES maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
@@ -305,8 +304,8 @@ decreasing the likelihood of your MIME-attached change being accepted. Exception: If your mailer is mangling patches then someone may ask you to re-send them using MIME. -See :doc:`/process/email-clients` for hints about configuring your e-mail -client so that it sends your patches untouched. +See Documentation/process/email-clients.rst for hints about configuring +your e-mail client so that it sends your patches untouched. Respond to review comments --------------------------
@@ -324,7 +323,7 @@ for their time. Code review is a tiring and time-consuming process, and reviewers sometimes get grumpy. Even in that case, though, respond politely and address the problems they have pointed out. -See :doc:`email-clients` for recommendations on email +See Documentation/process/email-clients.rst for recommendations on email clients and mailing list etiquette.
@@ -562,10 +561,10 @@ method for indicating a bug fixed by the patch. See :ref:`describe_changes` for more details. Note: Attaching a Fixes: tag does not subvert the stable kernel rules -process nor the requirement to Cc: [email protected] on all stable +process nor the requirement to Cc: [email protected] on all stable patch candidates. For more information, please read -:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` - +Documentation/process/stable-kernel-rules.rst. + .. _the_canonical_patch_format: The canonical patch format
@@ -824,8 +823,7 @@ Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". NO!!!! No more huge patch bombs to [email protected] people! <https://lore.kernel.org/r/[email protected]> -Kernel Documentation/process/coding-style.rst: - :ref:`Documentation/process/coding-style.rst <codingstyle>` +Kernel Documentation/process/coding-style.rst Linus Torvalds's mail on the canonical patch format: <https://lore.kernel.org/r/[email protected]>
Signature · 1 line
2.31.1
PATCH v2 24/29 docs: security: landlock.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/security/landlock.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/security/landlock.rst +2 -1
@@ -25,7 +25,8 @@ Any user can enforce Landlock rulesets on their processes. They are merged and evaluated according to the inherited ones in a way that ensures that only more constraints can be added. -User space documentation can be found here: :doc:`/userspace-api/landlock`. +User space documentation can be found here: +Documentation/userspace-api/landlock.rst. Guiding principles for safe access controls ===========================================
Signature · 1 line
2.31.1
PATCH v2 18/29 docs: i2c: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/i2c/instantiating-devices.rst | 2 +- Documentation/i2c/old-module-parameters.rst | 3 ++- Documentation/i2c/smbus-protocol.rst | 4 ++-- 3 files changed, 5 insertions(+), 4 deletions(-)
Documentation/i2c/instantiating-devices.rst +1 -1
@@ -59,7 +59,7 @@ Declare the I2C devices via ACPI ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ACPI can also describe I2C devices. There is special documentation for this -which is currently located at :doc:`../firmware-guide/acpi/enumeration`. +which is currently located at Documentation/firmware-guide/acpi/enumeration.rst. Declare the I2C devices in board files
Documentation/i2c/old-module-parameters.rst +2 -1
@@ -17,7 +17,8 @@ address), ``force`` (to forcibly attach the driver to a given device) and With the conversion of the I2C subsystem to the standard device driver binding model, it became clear that these per-module parameters were no longer needed, and that a centralized implementation was possible. The new, -sysfs-based interface is described in :doc:`instantiating-devices`, section +sysfs-based interface is described in +Documentation/i2c/instantiating-devices.rst, section "Method 4: Instantiate from user-space". Below is a mapping from the old module parameters to the new interface.
Documentation/i2c/smbus-protocol.rst +2 -2
@@ -27,8 +27,8 @@ a different protocol operation entirely. Each transaction type corresponds to a functionality flag. Before calling a transaction function, a device driver should always check (just once) for the corresponding functionality flag to ensure that the underlying I2C -adapter supports the transaction in question. See :doc:`functionality` for -the details. +adapter supports the transaction in question. See +Documentation/i2c/functionality.rst for the details. Key to symbols
Signature · 1 line
2.31.1
PATCH v2 29/29 docs: x86: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/x86/boot.rst | 4 ++-- Documentation/x86/mtrr.rst | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
Documentation/x86/boot.rst +2 -2
@@ -1343,7 +1343,7 @@ follow:: In addition to read/modify/write the setup header of the struct boot_params as that of 16-bit boot protocol, the boot loader should also fill the additional fields of the struct boot_params as -described in chapter :doc:`zero-page`. +described in chapter Documentation/x86/zero-page.rst. After setting up the struct boot_params, the boot loader can load the 32/64-bit kernel in the same way as that of 16-bit boot protocol.
@@ -1379,7 +1379,7 @@ can be calculated as follows:: In addition to read/modify/write the setup header of the struct boot_params as that of 16-bit boot protocol, the boot loader should also fill the additional fields of the struct boot_params as described -in chapter :doc:`zero-page`. +in chapter Documentation/x86/zero-page.rst. After setting up the struct boot_params, the boot loader can load 64-bit kernel in the same way as that of 16-bit boot protocol, but
Documentation/x86/mtrr.rst +1 -1
@@ -28,7 +28,7 @@ are aligned with platform MTRR setup. If MTRRs are only set up by the platform firmware code though and the OS does not make any specific MTRR mapping requests mtrr_type_lookup() should always return MTRR_TYPE_INVALID. -For details refer to :doc:`pat`. +For details refer to Documentation/x86/pat.rst. .. tip:: On Intel P6 family processors (Pentium Pro, Pentium II and later)
Signature · 1 line
2.31.1
PATCH v2 17/29 docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- .../firmware-guide/acpi/dsd/data-node-references.rst | 3 ++- Documentation/firmware-guide/acpi/dsd/graph.rst | 2 +- Documentation/firmware-guide/acpi/enumeration.rst | 7 ++++--- 3 files changed, 7 insertions(+), 5 deletions(-)
Documentation/firmware-guide/acpi/dsd/data-node-references.rst +2 -1
@@ -79,7 +79,8 @@ the ANOD object which is also the final target node of the reference. }) } -Please also see a graph example in :doc:`graph`. +Please also see a graph example in +Documentation/firmware-guide/acpi/dsd/graph.rst. References ==========
Documentation/firmware-guide/acpi/dsd/graph.rst +1 -1
@@ -174,4 +174,4 @@ References referenced 2016-10-04. [7] _DSD Device Properties Usage Rules. - :doc:`../DSD-properties-rules` + Documentation/firmware-guide/acpi/DSD-properties-rules.rst
Documentation/firmware-guide/acpi/enumeration.rst +4 -3
@@ -339,8 +339,8 @@ a code like this:: There are also devm_* versions of these functions which release the descriptors once the device is released. -See Documentation/firmware-guide/acpi/gpio-properties.rst for more information about the -_DSD binding related to GPIOs. +See Documentation/firmware-guide/acpi/gpio-properties.rst for more information +about the _DSD binding related to GPIOs. MFD devices ===========
@@ -460,7 +460,8 @@ the _DSD of the device object itself or the _DSD of its ancestor in the Otherwise, the _DSD itself is regarded as invalid and therefore the "compatible" property returned by it is meaningless. -Refer to :doc:`DSD-properties-rules` for more information. +Refer to Documentation/firmware-guide/acpi/DSD-properties-rules.rst for more +information. PCI hierarchy representation ============================
Signature · 1 line
2.31.1
PATCH v2 19/29 docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/kernel-hacking/hacking.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/kernel-hacking/hacking.rst +2 -2
@@ -601,7 +601,7 @@ Defined in ``include/linux/export.h`` This is the variant of `EXPORT_SYMBOL()` that allows specifying a symbol namespace. Symbol Namespaces are documented in -:doc:`../core-api/symbol-namespaces` +Documentation/core-api/symbol-namespaces.rst :c:func:`EXPORT_SYMBOL_NS_GPL()` --------------------------------
@@ -610,7 +610,7 @@ Defined in ``include/linux/export.h`` This is the variant of `EXPORT_SYMBOL_GPL()` that allows specifying a symbol namespace. Symbol Namespaces are documented in -:doc:`../core-api/symbol-namespaces` +Documentation/core-api/symbol-namespaces.rst Routines and Conventions ========================
Signature · 1 line
2.31.1
PATCH v2 27/29 docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/userspace-api/landlock.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
Documentation/userspace-api/landlock.rst +6 -5
@@ -145,7 +145,8 @@ Bind mounts and OverlayFS Landlock enables to restrict access to file hierarchies, which means that these access rights can be propagated with bind mounts (cf. -:doc:`/filesystems/sharedsubtree`) but not with :doc:`/filesystems/overlayfs`. +Documentation/filesystems/sharedsubtree.rst) but not with +Documentation/filesystems/overlayfs.rst. A bind mount mirrors a source file hierarchy to a destination. The destination hierarchy is then composed of the exact same files, on which Landlock rules can
@@ -170,8 +171,8 @@ Inheritance Every new thread resulting from a :manpage:`clone(2)` inherits Landlock domain restrictions from its parent. This is similar to the seccomp inheritance (cf. -:doc:`/userspace-api/seccomp_filter`) or any other LSM dealing with task's -:manpage:`credentials(7)`. For instance, one process's thread may apply +Documentation/userspace-api/seccomp_filter.rst) or any other LSM dealing with +task's :manpage:`credentials(7)`. For instance, one process's thread may apply Landlock rules to itself, but they will not be automatically applied to other sibling threads (unlike POSIX thread credential changes, cf. :manpage:`nptl(7)`).
@@ -278,7 +279,7 @@ Memory usage ------------ Kernel memory allocated to create rulesets is accounted and can be restricted -by the :doc:`/admin-guide/cgroup-v1/memory`. +by the Documentation/admin-guide/cgroup-v1/memory.rst. Questions and answers =====================
@@ -303,7 +304,7 @@ issues, especially when untrusted processes can manipulate them (cf. Additional documentation ======================== -* :doc:`/security/landlock` +* Documentation/security/landlock.rst * https://landlock.io .. Links
Signature · 1 line
2.31.1
PATCH v2 10/29 docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/dev-tools/kunit/faq.rst | 2 +- Documentation/dev-tools/kunit/index.rst | 14 +++++++------- Documentation/dev-tools/kunit/start.rst | 4 ++-- Documentation/dev-tools/kunit/tips.rst | 5 +++-- Documentation/dev-tools/kunit/usage.rst | 8 +++++--- 5 files changed, 18 insertions(+), 15 deletions(-)
Documentation/dev-tools/kunit/faq.rst +1 -1
@@ -97,7 +97,7 @@ things to try. modules will automatically execute associated tests when loaded. Test results can be collected from ``/sys/kernel/debug/kunit/<test suite>/results``, and can be parsed with ``kunit.py parse``. For more details, see "KUnit on - non-UML architectures" in :doc:`usage`. + non-UML architectures" in Documentation/dev-tools/kunit/usage.rst. If none of the above tricks help, you are always welcome to email any issues to [email protected].
Documentation/dev-tools/kunit/index.rst +7 -7
@@ -36,7 +36,7 @@ To make running these tests (and reading the results) easier, KUnit offers results. This provides a quick way of running KUnit tests during development, without requiring a virtual machine or separate hardware. -Get started now: :doc:`start` +Get started now: Documentation/dev-tools/kunit/start.rst Why KUnit? ==========
@@ -88,9 +88,9 @@ it takes to read their test log? How do I use it? ================ -* :doc:`start` - for new users of KUnit -* :doc:`tips` - for short examples of best practices -* :doc:`usage` - for a more detailed explanation of KUnit features -* :doc:`api/index` - for the list of KUnit APIs used for testing -* :doc:`kunit-tool` - for more information on the kunit_tool helper script -* :doc:`faq` - for answers to some common questions about KUnit +* Documentation/dev-tools/kunit/start.rst - for new users of KUnit +* Documentation/dev-tools/kunit/tips.rst - for short examples of best practices +* Documentation/dev-tools/kunit/usage.rst - for a more detailed explanation of KUnit features +* Documentation/dev-tools/kunit/api/index.rst - for the list of KUnit APIs used for testing +* Documentation/dev-tools/kunit/kunit-tool.rst - for more information on the kunit_tool helper script +* Documentation/dev-tools/kunit/faq.rst - for answers to some common questions about KUnit
Documentation/dev-tools/kunit/start.rst +2 -2
@@ -21,7 +21,7 @@ The wrapper can be run with: ./tools/testing/kunit/kunit.py run For more information on this wrapper (also called kunit_tool) check out the -:doc:`kunit-tool` page. +Documentation/dev-tools/kunit/kunit-tool.rst page. Creating a .kunitconfig -----------------------
@@ -234,7 +234,7 @@ Congrats! You just wrote your first KUnit test! Next Steps ========== -* Check out the :doc:`tips` page for tips on +* Check out the Documentation/dev-tools/kunit/tips.rst page for tips on writing idiomatic KUnit tests. * Optional: see the :doc:`usage` page for a more in-depth explanation of KUnit.
Documentation/dev-tools/kunit/tips.rst +3 -2
@@ -125,7 +125,8 @@ Here's a slightly in-depth example of how one could implement "mocking": Note: here we're able to get away with using ``test->priv``, but if you wanted -something more flexible you could use a named ``kunit_resource``, see :doc:`api/test`. +something more flexible you could use a named ``kunit_resource``, see +Documentation/dev-tools/kunit/api/test.rst. Failing the current test ------------------------
@@ -185,5 +186,5 @@ Alternatively, one can take full control over the error message by using ``KUNIT Next Steps ========== -* Optional: see the :doc:`usage` page for a more +* Optional: see the Documentation/dev-tools/kunit/usage.rst page for a more in-depth explanation of KUnit.
Documentation/dev-tools/kunit/usage.rst +5 -3
@@ -10,7 +10,7 @@ understand it. This guide assumes a working knowledge of the Linux kernel and some basic knowledge of testing. For a high level introduction to KUnit, including setting up KUnit for your -project, see :doc:`start`. +project, see Documentation/dev-tools/kunit/start.rst. Organization of this document =============================
@@ -99,7 +99,8 @@ violated; however, the test will continue running, potentially trying other expectations until the test case ends or is otherwise terminated. This is as opposed to *assertions* which are discussed later. -To learn about more expectations supported by KUnit, see :doc:`api/test`. +To learn about more expectations supported by KUnit, see +Documentation/dev-tools/kunit/api/test.rst. .. note:: A single test case should be pretty short, pretty easy to understand,
@@ -216,7 +217,8 @@ test suite in a special linker section so that it can be run by KUnit either after late_init, or when the test module is loaded (depending on whether the test was built in or not). -For more information on these types of things see the :doc:`api/test`. +For more information on these types of things see the +Documentation/dev-tools/kunit/api/test.rst. Common Patterns ===============
Signature · 1 line
2.31.1
PATCH v2 11/29 docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- .../devicetree/bindings/submitting-patches.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/submitting-patches.rst +6 -5
@@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches I. For patch submitters ======================= - 0) Normal patch submission rules from Documentation/process/submitting-patches.rst - applies. + 0) Normal patch submission rules from + Documentation/process/submitting-patches.rst applies. 1) The Documentation/ and include/dt-bindings/ portion of the patch should be a separate patch. The preferred subject prefix for binding patches is::
@@ -25,8 +25,8 @@ I. For patch submitters make dt_binding_check - See Documentation/devicetree/bindings/writing-schema.rst for more details about - schema and tools setup. + See Documentation/devicetree/bindings/writing-schema.rst for more details + about schema and tools setup. 3) DT binding files should be dual licensed. The preferred license tag is (GPL-2.0-only OR BSD-2-Clause).
@@ -84,7 +84,8 @@ II. For kernel maintainers III. Notes ========== - 0) Please see :doc:`ABI` for details regarding devicetree ABI. + 0) Please see Documentation/devicetree/bindings/ABI.rst for details + regarding devicetree ABI. 1) This document is intended as a general familiarization with the process as decided at the 2013 Kernel Summit. When in doubt, the current word of the
Signature · 1 line
2.31.1
PATCH v2 25/29 docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/trace/coresight/coresight.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
Documentation/trace/coresight/coresight.rst +5 -3
@@ -315,7 +315,8 @@ intermediate links as required. Note: ``cti_sys0`` appears in two of the connections lists above. CTIs can connect to multiple devices and are arranged in a star topology -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst) +[#fourth]_ for further details. Looking at this device we see 4 connections:: linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections
@@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API:: crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 root@genericarmv8:~# -Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +Details on how to use the generic STM API can be found here: +- Documentation/trace/stm.rst [#second]_. The CTI & CTM Modules ---------------------
@@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via channels on the CTM (Cross Trigger Matrix). A separate documentation file is provided to explain the use of these devices. -(:doc:`coresight-ect`) [#fourth]_. +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_. .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
Signature · 1 line
2.31.1
PATCH v2 26/29 docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/trace/ftrace.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/trace/ftrace.rst +1 -1
@@ -40,7 +40,7 @@ See events.rst for more information. Implementation Details ---------------------- -See :doc:`ftrace-design` for details for arch porters and such. +See Documentation/trace/ftrace-design.rst for details for arch porters and such. The File System
Signature · 1 line
2.31.1
PATCH v2 14/29 docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/driver-api/gpio/using-gpio.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/driver-api/gpio/using-gpio.rst +2 -2
@@ -9,13 +9,13 @@ with them. For examples of already existing generic drivers that will also be good examples for any other kernel drivers you want to author, refer to -:doc:`drivers-on-gpio` +Documentation/driver-api/gpio/drivers-on-gpio.rst For any kind of mass produced system you want to support, such as servers, laptops, phones, tablets, routers, and any consumer or office or business goods using appropriate kernel drivers is paramount. Submit your code for inclusion in the upstream Linux kernel when you feel it is mature enough and you will get -help to refine it, see :doc:`../../process/submitting-patches`. +help to refine it, see Documentation/process/submitting-patches.rst. In Linux GPIO lines also have a userspace ABI.
Signature · 1 line
2.31.1
PATCH v2 16/29 docs: driver-api: usb: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/driver-api/usb/dma.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/driver-api/usb/dma.rst +3 -3
@@ -10,7 +10,7 @@ API overview The big picture is that USB drivers can continue to ignore most DMA issues, though they still must provide DMA-ready buffers (see -:doc:`/core-api/dma-api-howto`). That's how they've worked through +Documentation/core-api/dma-api-howto.rst). That's how they've worked through the 2.4 (and earlier) kernels, or they can now be DMA-aware. DMA-aware usb drivers:
@@ -60,7 +60,7 @@ and effects like cache-trashing can impose subtle penalties. force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on systems where the I/O would otherwise thrash an IOMMU mapping. (See - :doc:`/core-api/dma-api-howto` for definitions of "coherent" and + Documentation/core-api/dma-api-howto.rst for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably
@@ -91,7 +91,7 @@ Working with existing buffers Existing buffers aren't usable for DMA without first being mapped into the DMA address space of the device. However, most buffers passed to your driver can safely be used with such DMA mapping. (See the first section -of :doc:`/core-api/dma-api-howto`, titled "What memory is DMA-able?") +of Documentation/core-api/dma-api-howto.rst, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single
Signature · 1 line
2.31.1
PATCH v2 1/29 docs: devices.rst: better reference documentation docs
In reply to Mauro Carvalho ChehabThere's no need to use either :file: or :doc: tags for documentation, as automarkup.py automatically converts Documentation/*.rst into a cross-reference.
--- Documentation/driver-api/pm/devices.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/driver-api/pm/devices.rst +4 -4
@@ -217,7 +217,7 @@ system-wide transition to a sleep state even though its :c:member:`runtime_auto` flag is clear. For more information about the runtime power management framework, refer to -:file:`Documentation/power/runtime_pm.rst`. +Documentation/power/runtime_pm.rst. Calling Drivers to Enter and Leave System Sleep States
@@ -655,7 +655,7 @@ been thawed. Generally speaking, the PM notifiers are suitable for performing actions that either require user space to be available, or at least won't interfere with user space. -For details refer to :doc:`notifiers`. +For details refer to Documentation/driver-api/pm/notifiers.rst. Device Low-Power (suspend) States
@@ -726,7 +726,7 @@ it into account in any way. Devices may be defined as IRQ-safe which indicates to the PM core that their runtime PM callbacks may be invoked with disabled interrupts (see -:file:`Documentation/power/runtime_pm.rst` for more information). If an +Documentation/power/runtime_pm.rst for more information). If an IRQ-safe device belongs to a PM domain, the runtime PM of the domain will be disallowed, unless the domain itself is defined as IRQ-safe. However, it makes sense to define a PM domain as IRQ-safe only if all the devices in it
@@ -805,7 +805,7 @@ The ``DPM_FLAG_MAY_SKIP_RESUME`` Driver Flag -------------------------------------------- During system-wide resume from a sleep state it's easiest to put devices into -the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`. +the full-power state, as explained in Documentation/power/runtime_pm.rst. [Refer to that document for more information regarding this particular issue as well as for information on the device runtime power management framework in general.] However, it often is desirable to leave devices in suspend after
Signature · 1 line
2.31.1
PATCH v2 15/29 docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- .../surface_aggregator/clients/index.rst | 3 ++- .../driver-api/surface_aggregator/internal.rst | 15 ++++++++------- .../driver-api/surface_aggregator/overview.rst | 6 ++++-- 3 files changed, 14 insertions(+), 10 deletions(-)
Documentation/driver-api/surface_aggregator/clients/index.rst +2 -1
@@ -5,7 +5,8 @@ Client Driver Documentation =========================== This is the documentation for client drivers themselves. Refer to -:doc:`../client` for documentation on how to write client drivers. +Documentation/driver-api/surface_aggregator/client.rst for documentation +on how to write client drivers. .. toctree:: :maxdepth: 1
Documentation/driver-api/surface_aggregator/internal.rst +8 -7
@@ -87,10 +87,11 @@ native SSAM devices, i.e. devices that are not defined in ACPI and not implemented as platform devices, via |ssam_device| and |ssam_device_driver| simplify management of client devices and client drivers. -Refer to :doc:`client` for documentation regarding the client device/driver -API and interface options for other kernel drivers. It is recommended to -familiarize oneself with that chapter and the :doc:`ssh` before continuing -with the architectural overview below. +Refer to Documentation/driver-api/surface_aggregator/client.rst for +documentation regarding the client device/driver API and interface options +for other kernel drivers. It is recommended to familiarize oneself with +that chapter and the Documentation/driver-api/surface_aggregator/ssh.rst +before continuing with the architectural overview below. Packet Transport Layer
@@ -190,9 +191,9 @@ with success on the transmitter thread. Transmission of sequenced packets is limited by the number of concurrently pending packets, i.e. a limit on how many packets may be waiting for an ACK -from the EC in parallel. This limit is currently set to one (see :doc:`ssh` -for the reasoning behind this). Control packets (i.e. ACK and NAK) can -always be transmitted. +from the EC in parallel. This limit is currently set to one (see +Documentation/driver-api/surface_aggregator/ssh.rst for the reasoning behind +this). Control packets (i.e. ACK and NAK) can always be transmitted. Receiver Thread ---------------
Documentation/driver-api/surface_aggregator/overview.rst +4 -2
@@ -73,5 +73,7 @@ being a direct response to a previous request. We may also refer to requests without response as commands. In general, events need to be enabled via one of multiple dedicated requests before they are sent by the EC. -See :doc:`ssh` for a more technical protocol documentation and -:doc:`internal` for an overview of the internal driver architecture. +See Documentation/driver-api/surface_aggregator/ssh.rst for a +more technical protocol documentation and +Documentation/driver-api/surface_aggregator/internal.rst for an +overview of the internal driver architecture.
Signature · 1 line
2.31.1
PATCH v2 13/29 docs: driver-api: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/driver-api/ioctl.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Documentation/driver-api/ioctl.rst +1 -1
@@ -34,7 +34,7 @@ _IO/_IOR/_IOW/_IOWR type An 8-bit number, often a character literal, specific to a subsystem - or driver, and listed in :doc:`../userspace-api/ioctl/ioctl-number` + or driver, and listed in Documentation/userspace-api/ioctl/ioctl-number.rst nr An 8-bit number identifying the specific command, unique for a give
Signature · 1 line
2.31.1
PATCH v2 12/29 docs: doc-guide: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabThe :doc:foo tag is auto-generated via automarkup.py. So, use the filename at the sources, instead of :doc:foo.
--- Documentation/doc-guide/contributing.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
Documentation/doc-guide/contributing.rst +4 -4
@@ -237,10 +237,10 @@ We have been trying to improve the situation through the creation of a set of "books" that group documentation for specific readers. These include: - - :doc:`../admin-guide/index` - - :doc:`../core-api/index` - - :doc:`../driver-api/index` - - :doc:`../userspace-api/index` + - Documentation/admin-guide/index.rst + - Documentation/core-api/index.rst + - Documentation/driver-api/index.rst + - Documentation/userspace-api/index.rst As well as this book on documentation itself.
Signature · 1 line
2.31.1
Re: [PATCH v2 17/29] docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 4 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>
Signature · 1 line
Sakari Ailus
Re: [PATCH v2 22/29] docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 4 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>
I do still think it would be nice to have a hint in the commit log about *why* we're doing this.
Quoted 38 lines
--- Documentation/PCI/pci.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)Documentation/PCI/pci.rst +3
-3@@ -265,7 +265,7 @@ Set the DMA mask size --------------------- .. note:: If anything below doesn't make sense, please refer to - :doc:`/core-api/dma-api`. This section is just a reminder that + Documentation/core-api/dma-api.rst. This section is just a reminder that drivers need to indicate DMA capabilities of the device and is not an authoritative source for DMA interfaces.@@ -291,7 +291,7 @@ Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are Setup shared control data ------------------------- Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared) -memory. See :doc:`/core-api/dma-api` for a full description of +memory. See Documentation/core-api/dma-api.rst for a full description of the DMA APIs. This section is just a reminder that it needs to be done before enabling DMA on the device.@@ -421,7 +421,7 @@ owners if there is one. Then clean up "consistent" buffers which contain the control data. -See :doc:`/core-api/dma-api` for details on unmapping interfaces. +See Documentation/core-api/dma-api.rst for details on unmapping interfaces. Unregister from other subsystemsSignature · 1 line
2.31.1
Re: [PATCH v2 04/29] docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 1 line · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py.
and that is not good why?
Quoted 12 lines
So, use the filename at the sources, instead of :doc:
foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>--- .../hw-vuln/special-register-buffer-data-sampling.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +0
-0
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst line 6
Quoted 4 lines
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +0
-1@@ -3,7 +3,8 @@ SRBDS - Special Register Buffer Data Sampling ============================================= -SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques to
I thought the point of :doc:mds was to insert a tag or link to the mds document.
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst line 7
Quoted 2 lines
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +2
-0+SRBDS is a hardware vulnerability that allows MDS +Documentation/admin-guide/hw-vuln/mds.rst techniques to
will this make a hyper-link in generated HTML docs?
FWIW I'm ok with this change either way. I just wanted to understand a little better.
--mark
Quoted 6 lines
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +0
-0infer values returned from special register accesses. Special register accesses are accesses to off core registers. According to Intel's evaluation, the special register reads that have a security expectation of privacy areSignature · 1 line
2.31.1
Re: [PATCH v2 04/29] docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
Em Wed, 16 Jun 2021 11:21:28 -0700
mark gross <[email protected]> escreveu:
Quoted 3 lines · Mauro Carvalho Chehab
Quoted 1 line
The :doc:
footag is auto-generated viaautomarkup.py.and that is not good why?
Patch 00 contains a little more info:
https://lore.kernel.org/linux-doc/[email protected]/T/#t
Basically, some Kernel developers rely on editor features to jump directly into other files. Using Documentation/foo.rst enable such features.
Quoted 16 lines
Quoted 16 lines
So, use the filename at the sources, instead of :doc:
foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>--- .../hw-vuln/special-register-buffer-data-sampling.rst | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +0
-0@@ -3,7 +3,8 @@ SRBDS - Special Register Buffer Data Sampling =============================================
Quoted 7 lines
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst line 6
Quoted 1 line
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +0
-1-SRBDS is a hardware vulnerability that allows MDS :doc:`mds` techniques toI thought the point of :doc:
mdswas to insert a tag or link to the mds document.Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst line 7
Quoted 2 lines
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +2
-0+SRBDS is a hardware vulnerability that allows MDS +Documentation/admin-guide/hw-vuln/mds.rst techniques towill this make a hyper-link in generated HTML docs?
It will still generate the same hyper-links in HTML, LaTeX and PDF outputs, as the automarkup.py extension will convert Documentation/foo.rst into doc:foo.
Quoted 12 lines
FWIW I'm ok with this change either way. I just wanted to understand a little better.
--mark
Quoted 6 lines
Documentation/admin-guide/hw-vuln/special-register-buffer-data-sampling.rst +0
-0infer values returned from special register accesses. Special register accesses are accesses to off core registers. According to Intel's evaluation, the special register reads that have a security expectation of privacy areSignature · 1 line
2.31.1
Thanks,
Mauro
Re: [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 25 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>--- .../devicetree/bindings/submitting-patches.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)Documentation/devicetree/bindings/submitting-patches.rst +2
-2@@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches I. For patch submitters ======================= - 0) Normal patch submission rules from Documentation/process/submitting-patches.rst - applies. + 0) Normal patch submission rules from + Documentation/process/submitting-patches.rst applies. 1) The Documentation/ and include/dt-bindings/ portion of the patch should be a separate patch. The preferred subject prefix for binding patches is::
Documentation/devicetree/bindings/submitting-patches.rst I. For patch submitters · line 29
Quoted 7 lines
Documentation/devicetree/bindings/submitting-patches.rst +2
-2@@ -25,8 +25,8 @@ I. For patch submitters make dt_binding_check - See Documentation/devicetree/bindings/writing-schema.rst for more details about - schema and tools setup. + See Documentation/devicetree/bindings/writing-schema.rst for more details + about schema and tools setup.
These don't match $subject.
Documentation/devicetree/bindings/submitting-patches.rst II. For kernel maintainers · line 88
Quoted 10 lines
Documentation/devicetree/bindings/submitting-patches.rst +2
-13) DT binding files should be dual licensed. The preferred license tag is (GPL-2.0-only OR BSD-2-Clause).@@ -84,7 +84,8 @@ II. For kernel maintainers III. Notes ========== - 0) Please see :doc:`ABI` for details regarding devicetree ABI. + 0) Please see Documentation/devicetree/bindings/ABI.rst for details + regarding devicetree ABI.
Is this new? You did review my oneliner adding ':doc:' not too long ago.
Quoted 6 lines
Documentation/devicetree/bindings/submitting-patches.rst +0
-11) This document is intended as a general familiarization with the process as decided at the 2013 Kernel Summit. When in doubt, the current word of the --2.31.1
Re: [PATCH v2 11/29] docs: devicetree: bindings: submitting-patches.rst: avoid using ReST :doc:`foo` markup
Em Wed, 16 Jun 2021 16:08:05 -0600
Rob Herring <[email protected]> escreveu:
Quoted 28 lines
Quoted 26 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>--- .../devicetree/bindings/submitting-patches.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)Documentation/devicetree/bindings/submitting-patches.rst +2
-2@@ -7,8 +7,8 @@ Submitting Devicetree (DT) binding patches I. For patch submitters ======================= - 0) Normal patch submission rules from Documentation/process/submitting-patches.rst - applies. + 0) Normal patch submission rules from + Documentation/process/submitting-patches.rst applies. 1) The Documentation/ and include/dt-bindings/ portion of the patch should be a separate patch. The preferred subject prefix for binding patches is::@@ -25,8 +25,8 @@ I. For patch submitters
Quoted 8 lines
Documentation/devicetree/bindings/submitting-patches.rst I. For patch submitters · line 29
Quoted 6 lines
Documentation/devicetree/bindings/submitting-patches.rst +2
-2make dt_binding_check - See Documentation/devicetree/bindings/writing-schema.rst for more details about - schema and tools setup. + See Documentation/devicetree/bindings/writing-schema.rst for more details + about schema and tools setup.These don't match $subject.
Well, I just seek for all places where Documentation/* are, and adjusted them to 80-columns. I'll add a comment.
Quoted 8 lines
Quoted 8 lines
Documentation/devicetree/bindings/submitting-patches.rst +0
-03) DT binding files should be dual licensed. The preferred license tag is (GPL-2.0-only OR BSD-2-Clause).@@ -84,7 +84,8 @@ II. For kernel maintainers III. Notes ==========
Quoted 5 lines
Documentation/devicetree/bindings/submitting-patches.rst II. For kernel maintainers · line 88
Quoted 3 lines
Documentation/devicetree/bindings/submitting-patches.rst +2
-1- 0) Please see :doc:`ABI` for details regarding devicetree ABI. + 0) Please see Documentation/devicetree/bindings/ABI.rst for details + regarding devicetree ABI.Is this new? You did review my oneliner adding ':doc:' not too long ago.
Yes. It is due to some discussion we had upstream:
https://lore.kernel.org/linux-doc/[email protected]/
While the html/latex/pdf output is identical (as automarkup.py will convert Documentation/foo.rst into a cross-reference), using full path names allow developers to jump directly to other documents when they have the path name.
Quoted 7 lines
Quoted 7 lines
Documentation/devicetree/bindings/submitting-patches.rst +0
-11) This document is intended as a general familiarization with the process as decided at the 2013 Kernel Summit. When in doubt, the current word of the --2.31.1
Thanks,
Mauro
Re: [PATCH v2 25/29] docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 8 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>--- Documentation/trace/coresight/coresight.rst | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
Quoted 36 lines
Documentation/trace/coresight/coresight.rst +5
-3@@ -315,7 +315,8 @@ intermediate links as required. Note: ``cti_sys0`` appears in two of the connections lists above. CTIs can connect to multiple devices and are arranged in a star topology -via the CTM. See (:doc:`coresight-ect`) [#fourth]_ for further details. +via the CTM. See (Documentation/trace/coresight/coresight-ect.rst) +[#fourth]_ for further details. Looking at this device we see 4 connections:: linaro-developer:~# ls -l /sys/bus/coresight/devices/cti_sys0/connections@@ -606,7 +607,8 @@ interface provided for that purpose by the generic STM API:: crw------- 1 root root 10, 61 Jan 3 18:11 /dev/stm0 root@genericarmv8:~# -Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +Details on how to use the generic STM API can be found here: +- Documentation/trace/stm.rst [#second]_. The CTI & CTM Modules ---------------------@@ -616,7 +618,7 @@ individual CTIs and components, and can propagate these between all CTIs via channels on the CTM (Cross Trigger Matrix). A separate documentation file is provided to explain the use of these devices. -(:doc:`coresight-ect`) [#fourth]_. +(Documentation/trace/coresight/coresight-ect.rst) [#fourth]_. .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stmSignature · 1 line
2.31.1
Quoted 7 lines · Mauro Carvalho Chehab
(Maintainers bcc, to avoid too many recipient troubles)
As discussed at:
https://lore.kernel.org/linux-doc/[email protected]/It is better to avoid using :doc:
footo refer toDocumentation/foo.rst, as theautomarkup.pyextension should handle it automatically, on most cases.
I've applied the set, thanks.
jon
Re: [PATCH v2 27/29] docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 7 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Signed-off-by Mauro Carvalho Chehab <[email protected]>--- Documentation/userspace-api/landlock.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
Like others, I think it would be nice to explain the reason of this change in the commit message, and why it is better than the current way to do it.
Quoted 45 lines
Documentation/userspace-api/landlock.rst +6
-5@@ -145,7 +145,8 @@ Bind mounts and OverlayFS Landlock enables to restrict access to file hierarchies, which means that these access rights can be propagated with bind mounts (cf. -:doc:`/filesystems/sharedsubtree`) but not with :doc:`/filesystems/overlayfs`. +Documentation/filesystems/sharedsubtree.rst) but not with +Documentation/filesystems/overlayfs.rst. A bind mount mirrors a source file hierarchy to a destination. The destination hierarchy is then composed of the exact same files, on which Landlock rules can@@ -170,8 +171,8 @@ Inheritance Every new thread resulting from a :manpage:`clone(2)` inherits Landlock domain restrictions from its parent. This is similar to the seccomp inheritance (cf. -:doc:`/userspace-api/seccomp_filter`) or any other LSM dealing with task's -:manpage:`credentials(7)`. For instance, one process's thread may apply +Documentation/userspace-api/seccomp_filter.rst) or any other LSM dealing with +task's :manpage:`credentials(7)`. For instance, one process's thread may apply Landlock rules to itself, but they will not be automatically applied to other sibling threads (unlike POSIX thread credential changes, cf. :manpage:`nptl(7)`).@@ -278,7 +279,7 @@ Memory usage ------------ Kernel memory allocated to create rulesets is accounted and can be restricted -by the :doc:`/admin-guide/cgroup-v1/memory`. +by the Documentation/admin-guide/cgroup-v1/memory.rst. Questions and answers =====================@@ -303,7 +304,7 @@ issues, especially when untrusted processes can manipulate them (cf. Additional documentation ======================== -* :doc:`/security/landlock` +* Documentation/security/landlock.rst * https://landlock.io .. Links
Bartosz Golaszewski
AppliedRe: [PATCH v2 14/29] docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 31 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Reviewed-by Linus Walleij <[email protected]>Signed-off-by Mauro Carvalho Chehab <[email protected]>--- Documentation/driver-api/gpio/using-gpio.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)Documentation/driver-api/gpio/using-gpio.rst +2
-3@@ -9,13 +9,13 @@ with them. For examples of already existing generic drivers that will also be good examples for any other kernel drivers you want to author, refer to -:doc:`drivers-on-gpio` +Documentation/driver-api/gpio/drivers-on-gpio.rst For any kind of mass produced system you want to support, such as servers, laptops, phones, tablets, routers, and any consumer or office or business goods using appropriate kernel drivers is paramount. Submit your code for inclusion in the upstream Linux kernel when you feel it is mature enough and you will get -help to refine it, see :doc:`../../process/submitting-patches`. +help to refine it, see Documentation/process/submitting-patches.rst. In Linux GPIO lines also have a userspace ABI. --
Quoted 2 lines
2.31.1
Applied, thanks!
Bartosz
Re: [PATCH v2 10/29] docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
In reply to Mauro Carvalho ChehabQuoted 7 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.Reviewed-by David Gow <[email protected]>Acked-by Brendan Higgins <[email protected]>Signed-off-by Mauro Carvalho Chehab <[email protected]>
Hi, can you please rebase and resend your patch on top of
https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=kunit-fixes
Jonathan Corbet
maintainerRe: [PATCH v2 10/29] docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
Quoted 6 lines · Brendan Higgins
Quoted 4 lines · Mauro Carvalho Chehab
The :doc:
footag is auto-generated viaautomarkup.py. So, use the filename at the sources, instead of :doc:foo.
Quoted 7 lines
Quoted 3 lines
Reviewed-by David Gow <[email protected]>Acked-by Brendan Higgins <[email protected]>Signed-off-by Mauro Carvalho Chehab <[email protected]>Hi, can you please rebase and resend your patch on top of
https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/log/?h=kunit-fixes
I applied the whole set a couple of weeks ago, actually, so there shouldn't be any need for this...
Thanks,
jon