media: atomisp: reduce the gap for ISP2401
Subsystems (4)
v2 cover media: atomisp: reduce the gap for ISP2401
As the driver and the firmware are closely bound each other and we're using the Intel Aero firmware, with is widely available, make the sh_css code closer to the OOT device driver for such board.
As a plus, it reduces the number of #ifdefs inside the code.
Patch 1: drop several boilerplate files;
Patch 2 and above: reduce sh_css gap.
- v2: patch 12/13 from the past review was merged with 08/13.
Mauro Carvalho Chehab (12):
media: atomisp: drop empty files
media: atomisp: simplify sh_css_defs.h
media: atomisp: sh_css_metrics: drop some unused code
media: atomisp: sh_css_mipi: cleanup the code
media: atomisp: sh_css_params: remove tests for ISP2401
media: atomisp: sh_css_params: cleanup the code
media: atomisp: remove #ifdef HAS_NO_HMEM
media: atomisp: get rid of USE_WINDOWS_BINNING_FACTOR tests
media: atomisp: get rid of #ifdef HAS_BL
media: atomisp: get rid of sctbl_legacy_*
media: atomisp: sh_css_param_shading: fix comments coding style
media: atomisp: sh_css_sp: better support the current firmware
drivers/staging/media/atomisp/Makefile | 4 - .../staging/media/atomisp/pci/atomisp_cmd.c | 28 +-- .../staging/media/atomisp/pci/ia_css_pipe.h | 4 +- .../media/atomisp/pci/ia_css_stream_public.h | 10 +- .../pci/isp/kernels/bh/bh_2/ia_css_bh.host.c | 2 - .../raw_aa_binning_1.0/ia_css_raa.host.c | 2 - .../isp/kernels/s3a/s3a_1.0/ia_css_s3a.host.c | 5 - .../isp/kernels/tnr/tnr_1.0/ia_css_tnr.host.c | 6 +- .../kernels/tnr/tnr_1.0/ia_css_tnr_param.h | 4 +- .../pci/isp/modes/interface/isp_const.h | 4 +- .../runtime/binary/interface/ia_css_binary.h | 2 - .../atomisp/pci/runtime/binary/src/binary.c | 18 +- .../pci/runtime/debug/src/ia_css_debug.c | 2 +- drivers/staging/media/atomisp/pci/sh_css.c | 16 +- .../staging/media/atomisp/pci/sh_css_defs.h | 48 +--- .../media/atomisp/pci/sh_css_firmware.h | 3 - .../media/atomisp/pci/sh_css_internal.h | 2 +- .../media/atomisp/pci/sh_css_metadata.c | 17 -- .../media/atomisp/pci/sh_css_metrics.c | 25 -- .../staging/media/atomisp/pci/sh_css_mipi.c | 159 +++---------- .../staging/media/atomisp/pci/sh_css_mipi.h | 15 -- .../staging/media/atomisp/pci/sh_css_morph.c | 17 -- .../media/atomisp/pci/sh_css_param_shading.c | 80 +++---- .../staging/media/atomisp/pci/sh_css_params.c | 219 ++---------------- .../staging/media/atomisp/pci/sh_css_params.h | 8 - .../media/atomisp/pci/sh_css_shading.c | 17 -- drivers/staging/media/atomisp/pci/sh_css_sp.c | 17 +- .../staging/media/atomisp/pci/sh_css_stream.c | 17 -- 28 files changed, 149 insertions(+), 602 deletions(-) delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_metadata.c delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_morph.c delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_shading.c delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_stream.c
Signature · 1 line
2.33.1
PATCH v2 1/12 media: atomisp: drop empty files
There's nothing inside such files. Just drop them.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
drivers/staging/media/atomisp/Makefile | 4 ---- .../staging/media/atomisp/pci/sh_css_metadata.c | 17 ----------------- .../staging/media/atomisp/pci/sh_css_morph.c | 17 ----------------- .../staging/media/atomisp/pci/sh_css_shading.c | 17 ----------------- .../staging/media/atomisp/pci/sh_css_stream.c | 17 ----------------- 5 files changed, 72 deletions(-) delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_metadata.c delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_morph.c delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_shading.c delete mode 100644 drivers/staging/media/atomisp/pci/sh_css_stream.c
drivers/staging/media/atomisp/Makefile +0 -4
@@ -27,20 +27,16 @@ atomisp-objs += \ pci/sh_css_firmware.o \ pci/sh_css_host_data.o \ pci/sh_css_hrt.o \ - pci/sh_css_metadata.o \ pci/sh_css_metrics.o \ pci/sh_css_mipi.o \ pci/sh_css_mmu.o \ - pci/sh_css_morph.o \ pci/sh_css.o \ pci/sh_css_param_dvs.o \ pci/sh_css_param_shading.o \ pci/sh_css_params.o \ pci/sh_css_properties.o \ - pci/sh_css_shading.o \ pci/sh_css_sp.o \ pci/sh_css_stream_format.o \ - pci/sh_css_stream.o \ pci/sh_css_version.o \ pci/base/circbuf/src/circbuf.o \ pci/base/refcount/src/refcount.o \
drivers/staging/media/atomisp/pci/sh_css_metadata.c deleted +0 -17
@@ -1,17 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* -* Support for Intel Camera Imaging ISP subsystem. -* Copyright (c) 2015, Intel Corporation. -* -* This program is free software; you can redistribute it and/or modify it -* under the terms and conditions of the GNU General Public License, -* version 2, as published by the Free Software Foundation. -* -* This program is distributed in the hope it will be useful, but WITHOUT -* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -* more details. -*/ - -/* This file will contain the code to implement the functions declared in ia_css_metadata.h -and associated helper functions */
drivers/staging/media/atomisp/pci/sh_css_morph.c deleted +0 -17
@@ -1,17 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* -* Support for Intel Camera Imaging ISP subsystem. -* Copyright (c) 2015, Intel Corporation. -* -* This program is free software; you can redistribute it and/or modify it -* under the terms and conditions of the GNU General Public License, -* version 2, as published by the Free Software Foundation. -* -* This program is distributed in the hope it will be useful, but WITHOUT -* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -* more details. -*/ - -/* This file will contain the code to implement the functions declared in ia_css_morph.h -and associated helper functions */
drivers/staging/media/atomisp/pci/sh_css_shading.c deleted +0 -17
@@ -1,17 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* -* Support for Intel Camera Imaging ISP subsystem. -* Copyright (c) 2015, Intel Corporation. -* -* This program is free software; you can redistribute it and/or modify it -* under the terms and conditions of the GNU General Public License, -* version 2, as published by the Free Software Foundation. -* -* This program is distributed in the hope it will be useful, but WITHOUT -* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -* more details. -*/ - -/* This file will contain the code to implement the functions declared in ia_css_shading.h -and associated helper functions */
drivers/staging/media/atomisp/pci/sh_css_stream.c deleted +0 -17
@@ -1,17 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* -* Support for Intel Camera Imaging ISP subsystem. -* Copyright (c) 2015, Intel Corporation. -* -* This program is free software; you can redistribute it and/or modify it -* under the terms and conditions of the GNU General Public License, -* version 2, as published by the Free Software Foundation. -* -* This program is distributed in the hope it will be useful, but WITHOUT -* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -* more details. -*/ - -/* This file will contain the code to implement the functions declared in ia_css_stream.h -and associated helper functions */
Signature · 1 line
2.33.1
PATCH v2 2/12 media: atomisp: simplify sh_css_defs.h
In reply to Mauro Carvalho ChehabThere are several unused macros. Simplify the logic there, making it closer to the Intel Aero driver and the corresponding firmware, as this is what we have widely available for this device.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../staging/media/atomisp/pci/atomisp_cmd.c | 28 +++-------- .../staging/media/atomisp/pci/ia_css_pipe.h | 4 +- .../isp/kernels/tnr/tnr_1.0/ia_css_tnr.host.c | 6 +-- .../kernels/tnr/tnr_1.0/ia_css_tnr_param.h | 4 +- .../pci/isp/modes/interface/isp_const.h | 4 +- .../atomisp/pci/runtime/binary/src/binary.c | 8 ++-- .../pci/runtime/debug/src/ia_css_debug.c | 2 +- drivers/staging/media/atomisp/pci/sh_css.c | 10 ++-- .../staging/media/atomisp/pci/sh_css_defs.h | 48 ++++--------------- .../media/atomisp/pci/sh_css_internal.h | 2 +- 10 files changed, 36 insertions(+), 80 deletions(-)
drivers/staging/media/atomisp/pci/atomisp_cmd.c +7 -21
@@ -3617,18 +3617,10 @@ int atomisp_cp_lsc_table(struct atomisp_sub_device *asd, }/* Shading table size per color */ -if (!IS_ISP2401 ) { -if (st->width >ISP2400_SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR || - st->height >ISP2400_SH_CSS_MAX_SCTBL_HEIGHT_PER_COLOR ) { -dev_err (asd->isp->dev,"shading table w/h validate failed!" ); -return -EINVAL ; - } - }else { -if (st->width >ISP2401_SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR || - st->height >ISP2401_SH_CSS_MAX_SCTBL_HEIGHT_PER_COLOR ) { -dev_err (asd->isp->dev,"shading table w/h validate failed!" ); -return -EINVAL ; - } +if (st->width >SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR || + st->height >SH_CSS_MAX_SCTBL_HEIGHT_PER_COLOR ) { +dev_err (asd->isp->dev,"shading table w/h validate failed!" ); +return -EINVAL ; } shading_table =atomisp_css_shading_table_alloc (st->width, st->height);
@@ -6181,15 +6173,9 @@ int atomisp_set_shading_table(struct atomisp_sub_device *asd, }/* Shading table size per color */ -if (!IS_ISP2401 ) { -if (user_shading_table->width >ISP2400_SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR || - user_shading_table->height >ISP2400_SH_CSS_MAX_SCTBL_HEIGHT_PER_COLOR ) -return -EINVAL ; - }else { -if (user_shading_table->width >ISP2401_SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR || - user_shading_table->height >ISP2401_SH_CSS_MAX_SCTBL_HEIGHT_PER_COLOR ) -return -EINVAL ; - } +if (user_shading_table->width >SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR || + user_shading_table->height >SH_CSS_MAX_SCTBL_HEIGHT_PER_COLOR ) +return -EINVAL ; shading_table =atomisp_css_shading_table_alloc ( user_shading_table->width, user_shading_table->height);
drivers/staging/media/atomisp/pci/ia_css_pipe.h +2 -2
@@ -33,7 +33,7 @@ struct ia_css_preview_settings {/* 2401 only for these two - do we in fact use them for anything real */ struct ia_css_frame *delay_frames[MAX_NUM_VIDEO_DELAY_FRAMES ]; -struct ia_css_frame *tnr_frames[NUM_TNR_FRAMES ]; +struct ia_css_frame *tnr_frames[NUM_VIDEO_TNR_FRAMES ];struct ia_css_pipe *copy_pipe;struct ia_css_pipe *capture_pipe;
@@ -81,7 +81,7 @@ struct ia_css_video_settings {struct ia_css_binary vf_pp_binary;struct ia_css_binary *yuv_scaler_binary;struct ia_css_frame *delay_frames[MAX_NUM_VIDEO_DELAY_FRAMES ]; -struct ia_css_frame *tnr_frames[NUM_TNR_FRAMES ]; +struct ia_css_frame *tnr_frames[NUM_VIDEO_TNR_FRAMES ];struct ia_css_frame *vf_pp_in_frame;struct ia_css_pipe *copy_pipe;struct ia_css_pipe *capture_pipe;
drivers/staging/media/atomisp/pci/isp/kernels/tnr/tnr_1.0/ia_css_tnr.host.c +3 -3
@@ -84,7 +84,7 @@ int ia_css_tnr_config(struct sh_css_isp_tnr_isp_config *to,return ret; to->width_a_over_b = elems_a / to->port_b.elems; to->frame_height = from->tnr_frames[0 ]->info.res.height; -for (i =0 ; i <NUM_TNR_FRAMES ; i++) { +for (i =0 ; i <NUM_VIDEO_TNR_FRAMES ; i++) { to->tnr_frame_addr[i] = from->tnr_frames[i]->data + from->tnr_frames[i]->planes.yuyv.offset; }
@@ -102,7 +102,7 @@ int ia_css_tnr_configure(const struct ia_css_binary *binary,struct ia_css_tnr_configuration config;unsigned int i; -for (i =0 ; i <NUM_TNR_FRAMES ; i++) +for (i =0 ; i <NUM_VIDEO_TNR_FRAMES ; i++) config.tnr_frames[i] = frames[i];return ia_css_configure_tnr (binary, &config);
@@ -115,7 +115,7 @@ ia_css_init_tnr_state( { (void )size; -assert (NUM_TNR_FRAMES >=2 ); +assert (NUM_VIDEO_TNR_FRAMES >=2 );assert (sizeof (*state) == size); state->tnr_in_buf_idx =0 ; state->tnr_out_buf_idx =1 ;
drivers/staging/media/atomisp/pci/isp/kernels/tnr/tnr_1.0/ia_css_tnr_param.h +2 -2
@@ -28,14 +28,14 @@ struct sh_css_isp_tnr_params { };struct ia_css_tnr_configuration { -const struct ia_css_frame *tnr_frames[NUM_TNR_FRAMES ]; +const struct ia_css_frame *tnr_frames[NUM_VIDEO_TNR_FRAMES ]; };struct sh_css_isp_tnr_isp_config {u32 width_a_over_b;u32 frame_height;struct dma_port_config port_b; -ia_css_ptr tnr_frame_addr[NUM_TNR_FRAMES ]; +ia_css_ptr tnr_frame_addr[NUM_VIDEO_TNR_FRAMES ]; };#endif /* __IA_CSS_TNR_PARAM_H */
drivers/staging/media/atomisp/pci/isp/modes/interface/isp_const.h +2 -2
@@ -154,9 +154,9 @@ more details./* [isp vmem] table size[vectors] per line per color (GR,R,B,GB), multiples of NWAY */ #define ISP2400_SCTBL_VECTORS_PER_LINE_PER_COLOR \ - CEIL_DIV(ISP2400_SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR, ISP_VEC_NELEMS) + CEIL_DIV(SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR, ISP_VEC_NELEMS)#define ISP2401_SCTBL_VECTORS_PER_LINE_PER_COLOR \ - CEIL_DIV(ISP2401_SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR, ISP_VEC_NELEMS) + CEIL_DIV(SH_CSS_MAX_SCTBL_WIDTH_PER_COLOR, ISP_VEC_NELEMS)/* [isp vmem] table size[vectors] per line for 4colors (GR,R,B,GB), multiples of NWAY */ #define SCTBL_VECTORS_PER_LINE \
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +4 -4
@@ -1336,12 +1336,12 @@ ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo,if (info->enable.sc) {if (!IS_ISP2401 ) { - binary->sctbl_width_per_color =_ISP2400_SCTBL_WIDTH_PER_COLOR (sc_3a_dis_padded_width, s3a_log_deci); - binary->sctbl_aligned_width_per_color =ISP2400_SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR ; - binary->sctbl_height =_ISP2400_SCTBL_HEIGHT (sc_3a_dis_height, s3a_log_deci); + binary->sctbl_width_per_color =_ISP_SCTBL_WIDTH_PER_COLOR (sc_3a_dis_padded_width, s3a_log_deci); + binary->sctbl_aligned_width_per_color =SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR ; + binary->sctbl_height =_ISP_SCTBL_HEIGHT (sc_3a_dis_height, s3a_log_deci); }else { binary->sctbl_width_per_color =_ISP2401_SCTBL_WIDTH_PER_COLOR (isp_internal_width, s3a_log_deci); - binary->sctbl_aligned_width_per_color =ISP2401_SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR ; + binary->sctbl_aligned_width_per_color =SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR ; binary->sctbl_height =_ISP2401_SCTBL_HEIGHT (isp_internal_height, s3a_log_deci); binary->sctbl_legacy_width_per_color =_ISP_SCTBL_LEGACY_WIDTH_PER_COLOR (sc_3a_dis_padded_width, s3a_log_deci); binary->sctbl_legacy_height =_ISP_SCTBL_LEGACY_HEIGHT (sc_3a_dis_height, s3a_log_deci);
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c +1 -1
@@ -2821,7 +2821,7 @@ ia_css_debug_pipe_graph_dump_stage( "in", true); } -for (i =0 ; i <NUM_TNR_FRAMES ; i++) { +for (i =0 ; i <NUM_VIDEO_TNR_FRAMES ; i++) {if (stage->args.tnr_frames[i]) { ia_css_debug_pipe_graph_dump_frame( stage->args.tnr_frames[i], id,
drivers/staging/media/atomisp/pci/sh_css.c +5 -5
@@ -1261,7 +1261,7 @@ void sh_css_binary_args_reset(struct sh_css_binary_args *args) {unsigned int i; -for (i =0 ; i <NUM_TNR_FRAMES ; i++) +for (i =0 ; i <NUM_VIDEO_TNR_FRAMES ; i++) args->tnr_frames[i] =NULL ;for (i =0 ; i <MAX_NUM_VIDEO_DELAY_FRAMES ; i++) args->delay_frames[i] =NULL ;
@@ -2228,10 +2228,10 @@ ia_css_pipe_destroy(struct ia_css_pipe *pipe) } }#ifndef ISP2401 -ia_css_frame_free_multiple (NUM_TNR_FRAMES , +ia_css_frame_free_multiple (NUM_VIDEO_TNR_FRAMES , pipe->pipe_settings.video.tnr_frames);#else -ia_css_frame_free_multiple (NUM_TNR_FRAMES , +ia_css_frame_free_multiple (NUM_VIDEO_TNR_FRAMES , pipe->pipe_settings.video.tnr_frames);#endif ia_css_frame_free_multiple(MAX_NUM_VIDEO_DELAY_FRAMES,
@@ -3424,7 +3424,7 @@ static int create_host_video_pipeline(struct ia_css_pipe *pipe)if (video_stage) {int frm; -for (frm =0 ; frm <NUM_TNR_FRAMES ; frm++) { +for (frm =0 ; frm <NUM_VIDEO_TNR_FRAMES ; frm++) { video_stage->args.tnr_frames[frm] = pipe->pipe_settings.video.tnr_frames[frm]; }
@@ -5163,7 +5163,7 @@ static int load_video_binaries(struct ia_css_pipe *pipe) tnr_info.format =IA_CSS_FRAME_FORMAT_YUV_LINE ; tnr_info.raw_bit_depth =SH_CSS_TNR_BIT_DEPTH ; -for (i =0 ; i <NUM_TNR_FRAMES ; i++) { +for (i =0 ; i <NUM_VIDEO_TNR_FRAMES ; i++) {if (mycs->tnr_frames[i]) {ia_css_frame_free (mycs->tnr_frames[i]); mycs->tnr_frames[i] =NULL ;
drivers/staging/media/atomisp/pci/sh_css_defs.h +9 -39
70 lines not on this page · raw message
drivers/staging/media/atomisp/pci/sh_css_internal.h +1 -1
@@ -270,7 +270,7 @@ struct sh_css_binary_args {struct ia_css_frame *in_frame;/* input frame */ const struct ia_css_frame *delay_frames[MAX_NUM_VIDEO_DELAY_FRAMES ];/* reference input frame */ -const struct ia_css_frame *tnr_frames[NUM_TNR_FRAMES ];/* tnr frames */ +const struct ia_css_frame *tnr_frames[NUM_VIDEO_TNR_FRAMES ];/* tnr frames */ struct ia_css_frame *out_frame[IA_CSS_BINARY_MAX_OUTPUT_PORTS ];/* output frame */ struct ia_css_frame *out_vf_frame;/* viewfinder output frame */
Signature · 1 line
2.33.1
PATCH v2 3/12 media: atomisp: sh_css_metrics: drop some unused code
In reply to Mauro Carvalho ChehabThere are two #ifdefs there which aren't defined anywhere.
So, just drop the dead code.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../media/atomisp/pci/sh_css_metrics.c | 25 ------------------- 1 file changed, 25 deletions(-)
drivers/staging/media/atomisp/pci/sh_css_metrics.c +0 -25
@@ -123,40 +123,15 @@ sh_css_metrics_sample_pcs(void)unsigned int pc;unsigned int msink; -#if SUSPEND -unsigned int sc =0 ; -unsigned int stopped_sc =0 ; -unsigned int resume_sc =0 ; -#endif -#if MULTIPLE_PCS -int i; -unsigned int pc_tab[NOF_PCS ]; - -for (i =0 ; i <NOF_PCS ; i++) - pc_tab[i] =0 ; -#endif if (!pc_histogram_enabled)return ;if (isp_histogram) { -#if SUSPEND -/* STOP the ISP */ -isp_ctrl_store (ISP0_ID ,ISP_SC_REG ,STOP_MASK ); -#endif msink =isp_ctrl_load (ISP0_ID ,ISP_CTRL_SINK_REG ); -#if MULTIPLE_PCS -for (i =0 ; i <NOF_PCS ; i++) - pc_tab[i] =isp_ctrl_load (ISP0_ID ,ISP_PC_REG ); -#else pc =isp_ctrl_load (ISP0_ID ,ISP_PC_REG ); -#endif -#if SUSPEND -/* RESUME the ISP */ -isp_ctrl_store (ISP0_ID ,ISP_SC_REG ,RESUME_MASK ); -#endif isp_histogram->msink[pc] &= msink; stall = (msink !=0x7FF );
Signature · 1 line
2.33.1
PATCH v2 4/12 media: atomisp: sh_css_mipi: cleanup the code
In reply to Mauro Carvalho ChehabWith the ISP2401 firmware we're using, the code differences are not that much from ISP2400. Cleanup the code in order to make it closer to Intel Aero driver.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../staging/media/atomisp/pci/sh_css_mipi.c | 159 +++++------------- .../staging/media/atomisp/pci/sh_css_mipi.h | 15 -- 2 files changed, 38 insertions(+), 136 deletions(-)
drivers/staging/media/atomisp/pci/sh_css_mipi.c +38 -121
@@ -33,47 +33,6 @@static u32 ref_count_mipi_allocation[N_CSI_PORTS ];/* Initialized in mipi_init */ -/* -* Check if a source port or TPG/PRBS ID is valid -*/ -static bool ia_css_mipi_is_source_port_valid (struct ia_css_pipe *pipe, -unsigned int *pport) -{ -bool ret = true; -unsigned int port =0 ; -unsigned int max_ports =0 ; - -switch (pipe->stream->config.mode) { -case IA_CSS_INPUT_MODE_BUFFERED_SENSOR : - port = (unsigned int )pipe->stream->config.source.port.port; - max_ports =N_CSI_PORTS ; -break ; -case IA_CSS_INPUT_MODE_TPG : - port = (unsigned int )pipe->stream->config.source.tpg.id; - max_ports =N_CSS_TPG_IDS ; -break ; -case IA_CSS_INPUT_MODE_PRBS : - port = (unsigned int )pipe->stream->config.source.prbs.id; - max_ports =N_CSS_PRBS_IDS ; -break ; -default : -assert (false); - ret = false; -break ; - } - -if (ret) { -assert (port < max_ports); - -if (port >= max_ports) - ret = false; - } - - *pport = port; - -return ret; -} -/* Assumptions: * - A line is multiple of 4 bytes = 1 word. * - Each frame has SOF and EOF (each 1 word).
@@ -227,6 +186,10 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,return err; } +/* +* Check if a source port or TPG/PRBS ID is valid +*/ +#if !defined(ISP2401 ) int ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
@@ -272,16 +235,20 @@ bool mipi_is_free(void)return true; } -int -calculate_mipi_buff_size ( -struct ia_css_stream_config *stream_cfg, -unsigned int *size_mem_words) +#if defined(ISP2401 ) +/* +* @brief Calculate the required MIPI buffer sizes. +* Based on the stream configuration, calculate the +* required MIPI buffer sizes (in DDR words). +* +* @param[in] stream_cfg Point to the target stream configuration +* @param[out] size_mem_words MIPI buffer size in DDR words. +* +* @return +*/ +static int calculate_mipi_buff_size (struct ia_css_stream_config *stream_cfg, +unsigned int *size_mem_words) { -#if !defined(ISP2401 ) -int err = -EINVAL ; - (void )stream_cfg; - (void )size_mem_words; -#else unsigned int width;unsigned int height;enum atomisp_input_format format;
@@ -373,26 +340,9 @@ calculate_mipi_buff_size( *size_mem_words = mem_words_per_buff;IA_CSS_LEAVE_ERR (err); -#endif return err; } - -static bool buffers_needed (struct ia_css_pipe *pipe) -{ -if (!IS_ISP2401 ) { -if (pipe->stream->config.mode ==IA_CSS_INPUT_MODE_BUFFERED_SENSOR ) -return true; -else -return false; - } - -if (pipe->stream->config.mode ==IA_CSS_INPUT_MODE_BUFFERED_SENSOR || - pipe->stream->config.mode ==IA_CSS_INPUT_MODE_TPG || - pipe->stream->config.mode ==IA_CSS_INPUT_MODE_PRBS ) -return true; - -return false; -} +#endif int allocate_mipi_frames(struct ia_css_pipe *pipe,
@@ -422,45 +372,25 @@ allocate_mipi_frames(struct ia_css_pipe *pipe, }#endif - -if (!buffers_needed (pipe)) { +if (pipe->stream->config.mode !=IA_CSS_INPUT_MODE_BUFFERED_SENSOR ) {ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE_PRIVATE ,"allocate_mipi_frames(%p) exit: no buffers needed for pipe mode.\n" , pipe);return 0 ;/* AM TODO: Check */ } -if (!IS_ISP2401 ) { - port = (unsigned int )pipe->stream->config.source.port.port; - }else { -/* Returns true if port is valid. So, invert it */ - err = !ia_css_mipi_is_source_port_valid (pipe, &port); - } - -assert (port <N_CSI_PORTS ); - -if ((!IS_ISP2401 && port >=N_CSI_PORTS ) || - (IS_ISP2401 && err)) { + port = (unsigned int )pipe->stream->config.source.port.port; +if (port >=N_CSI_PORTS ) {IA_CSS_ERROR ("allocate_mipi_frames(%p) exit: port is not correct (port=%d)." , pipe, port);return -EINVAL ; }#ifdef ISP2401 - err =calculate_mipi_buff_size ( - &pipe->stream->config, - &my_css.mipi_frame_size[port]); -#endif - -#if !defined(ISP2401 ) -if (ref_count_mipi_allocation[port] !=0 ) { -ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE_PRIVATE , -"allocate_mipi_frames(%p) exit: already allocated for this port (port=%d).\n" , - pipe, port); -return 0 ; - } -#else -/* 2401 system allows multiple streams to use same physical port. This is not + err =calculate_mipi_buff_size (&pipe->stream->config, + &my_css.mipi_frame_size[port]); +/* +* 2401 system allows multiple streams to use same physical port. This is not * true for 2400 system. Currently 2401 uses MIPI buffers as a temporary solution. * TODO AM: Once that is changed (removed) this code should be removed as well. * In that case only 2400 related code should remain.
@@ -472,6 +402,13 @@ allocate_mipi_frames(struct ia_css_pipe *pipe, pipe, port); return 0; } +#else +if (ref_count_mipi_allocation[port] !=0 ) { +ia_css_debug_dtrace (IA_CSS_DEBUG_TRACE_PRIVATE , +"allocate_mipi_frames(%p) exit: already allocated for this port (port=%d).\n" , + pipe, port); +return 0 ; + }#endif ref_count_mipi_allocation[port]++;
@@ -552,23 +489,15 @@ free_mipi_frames(struct ia_css_pipe *pipe)return -EINVAL ; } -if (!buffers_needed (pipe)) { +if (pipe->stream->config.mode !=IA_CSS_INPUT_MODE_BUFFERED_SENSOR ) {IA_CSS_ERROR ("free_mipi_frames(%p) exit: wrong mode." , pipe);return err; } -if (!IS_ISP2401 ) { - port = (unsigned int )pipe->stream->config.source.port.port; - }else { -/* Returns true if port is valid. So, invert it */ - err = !ia_css_mipi_is_source_port_valid (pipe, &port); - } + port = (unsigned int )pipe->stream->config.source.port.port; -assert (port <N_CSI_PORTS ); - -if ((!IS_ISP2401 && port >=N_CSI_PORTS ) || - (IS_ISP2401 && err)) { +if (port >=N_CSI_PORTS ) {IA_CSS_ERROR ("free_mipi_frames(%p, %d) exit: pipe port is not correct." , pipe, port);return err;
@@ -647,11 +576,7 @@ send_mipi_frames(struct ia_css_pipe *pipe) {int err = -EINVAL ;unsigned int i; -#ifndef ISP2401 unsigned int port; -#else -unsigned int port =0 ; -#endif IA_CSS_ENTER_PRIVATE ("pipe=%p" , pipe);
@@ -664,23 +589,15 @@ send_mipi_frames(struct ia_css_pipe *pipe)/* multi stream video needs mipi buffers */ /* nothing to be done in other cases. */ -if (!buffers_needed (pipe)) { +if (pipe->stream->config.mode !=IA_CSS_INPUT_MODE_BUFFERED_SENSOR ) {IA_CSS_LOG ("nothing to be done for this mode" );return 0 ;/* TODO: AM: maybe this should be returning an error. */ } -if (!IS_ISP2401 ) { - port = (unsigned int )pipe->stream->config.source.port.port; - }else { -/* Returns true if port is valid. So, invert it */ - err = !ia_css_mipi_is_source_port_valid (pipe, &port); - } + port = (unsigned int )pipe->stream->config.source.port.port; -assert (port <N_CSI_PORTS ); - -if ((!IS_ISP2401 && port >=N_CSI_PORTS ) || - (IS_ISP2401 && err)) { +if (port >=N_CSI_PORTS ) {IA_CSS_ERROR ("send_mipi_frames(%p) exit: invalid port specified (port=%d)." , pipe, port);return err;
drivers/staging/media/atomisp/pci/sh_css_mipi.h +0 -15
@@ -34,19 +34,4 @@ free_mipi_frames(struct ia_css_pipe *pipe);int send_mipi_frames (struct ia_css_pipe *pipe); -/** -* @brief Calculate the required MIPI buffer sizes. -* Based on the stream configuration, calculate the -* required MIPI buffer sizes (in DDR words). -* -* @param[in] stream_cfg Point to the target stream configuration -* @param[out] size_mem_words MIPI buffer size in DDR words. -* -* @return -*/ -int -calculate_mipi_buff_size ( -struct ia_css_stream_config *stream_cfg, -unsigned int *size_mem_words); -#endif /* __SH_CSS_MIPI_H */
Signature · 1 line
2.33.1
PATCH v2 5/12 media: atomisp: sh_css_params: remove tests for ISP2401
In reply to Mauro Carvalho ChehabThose tests are related to the input system, which is the same for the chosen firmware, so both ISP2400 and ISP2401 will be identical with that regards.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../staging/media/atomisp/pci/sh_css_params.c | 117 ++---------------- 1 file changed, 8 insertions(+), 109 deletions(-)
drivers/staging/media/atomisp/pci/sh_css_params.c +8 -109
@@ -104,15 +104,10 @@ (sizeof (char ) * (binary)->in_frame_info.res.height * \ (binary)->in_frame_info.padded_width) -#define ISP2400_SCTBL_BYTES (binary) \ +#define SCTBL_BYTES (binary) \ (sizeof(unsigned short) * (binary)->sctbl_height * \ (binary)->sctbl_aligned_width_per_color * IA_CSS_SC_NUM_COLORS) -#define ISP2401_SCTBL_BYTES (binary) \ - (sizeof(unsigned short) * max((binary)->sctbl_height, (binary)->sctbl_legacy_height) * \ -/* height should be the larger height between new api and legacy api */ \ - (binary)->sctbl_aligned_width_per_color * IA_CSS_SC_NUM_COLORS) -#define MORPH_PLANE_BYTES (binary) \ (SH_CSS_MORPH_TABLE_ELEM_BYTES * (binary)->morph_tbl_aligned_width * \ (binary)->morph_tbl_height)
@@ -1611,18 +1606,6 @@ ia_css_set_param_exceptions(const struct ia_css_pipe *pipe, params->dp_config.r = params->wb_config.r; params->dp_config.b = params->wb_config.b; params->dp_config.gb = params->wb_config.gb; - -if (IS_ISP2401 ) { -assert (pipe); -assert (pipe->mode <IA_CSS_PIPE_ID_NUM ); - -if (pipe->mode <IA_CSS_PIPE_ID_NUM ) { - params->pipe_dp_config[pipe->mode].gr = params->wb_config.gr; - params->pipe_dp_config[pipe->mode].r = params->wb_config.r; - params->pipe_dp_config[pipe->mode].b = params->wb_config.b; - params->pipe_dp_config[pipe->mode].gb = params->wb_config.gb; - } - } }/* ISP2401 */
@@ -2072,16 +2055,6 @@ sh_css_init_isp_params_from_config(struct ia_css_pipe *pipe, params->output_frame = config->output_frame; params->isp_parameters_id = config->isp_config_id; -/* Currently we do not offer CSS interface to set different -* configurations for DPC, i.e. depending on DPC being enabled -* before (NORM+OBC) or after. The folllowing code to set the -* DPC configuration should be updated when this interface is made -* available */ -if (IS_ISP2401 ) { -sh_css_set_dp_config (pipe, params, config->dp_config); -ia_css_set_param_exceptions (pipe, params); - } -if (0 ==sh_css_select_dp_10bpp_config (pipe, &is_dp_10bpp)) {/* return an error when both DPC and BDS is enabled by the
@@ -2096,8 +2069,7 @@ sh_css_init_isp_params_from_config(struct ia_css_pipe *pipe, goto exit; } -if (!IS_ISP2401 ) -ia_css_set_param_exceptions (pipe, params); +ia_css_set_param_exceptions (pipe, params); exit:IA_CSS_LEAVE_ERR_PRIVATE (err);
@@ -2514,29 +2486,7 @@ sh_css_init_isp_params_from_global(struct ia_css_stream *stream,ia_css_set_ob_config (params, &default_ob_config);ia_css_set_dp_config (params, &default_dp_config); -if (!IS_ISP2401 ) { -ia_css_set_param_exceptions (pipe_in, params); - }else { -for (i =0 ; i < stream->num_pipes; i++) { -if (sh_css_select_dp_10bpp_config (stream->pipes[i], - &is_dp_10bpp) ==0 ) { -/* set the return value as false if both DPC and -* BDS is enabled by the user. But we do not return -* the value immediately to enable internal firmware -* feature testing. */ -if (is_dp_10bpp) { -sh_css_set_dp_config (stream->pipes[i], params, &default_dp_10bpp_config); - }else { -sh_css_set_dp_config (stream->pipes[i], params, &default_dp_config); - } - }else { - retval = false; - goto exit; - } - -ia_css_set_param_exceptions (stream->pipes[i], params); - } - } +ia_css_set_param_exceptions (pipe_in, params);ia_css_set_de_config (params, &default_de_config);ia_css_set_gc_config (params, &default_gc_config);
@@ -2641,20 +2591,9 @@ sh_css_init_isp_params_from_global(struct ia_css_stream *stream, retval = false; goto exit; } -if (IS_ISP2401 ) { -if (stream->pipes[i]->mode <IA_CSS_PIPE_ID_NUM ) { -sh_css_set_dp_config (stream->pipes[i], params, - &stream_params->pipe_dp_config[stream->pipes[i]->mode]); -ia_css_set_param_exceptions (stream->pipes[i], params); - }else { - retval = false; - goto exit; - } - } } -if (!IS_ISP2401 ) -ia_css_set_param_exceptions (pipe_in, params); +ia_css_set_param_exceptions (pipe_in, params); params->fpn_config.data = stream_params->fpn_config.data; params->config_changed[IA_CSS_FPN_ID] =
@@ -2806,10 +2745,7 @@ int ia_css_pipe_set_bci_scaler_lut(struct ia_css_pipe *pipe, pipe->scaler_pp_lut = mmgr_NULL;if (!stream_started) { -if (!IS_ISP2401 ) - pipe->scaler_pp_lut =hmm_alloc (sizeof (zoom_table),HMM_BO_PRIVATE ,0 ,NULL ,0 ); -else - pipe->scaler_pp_lut =sh_css_params_alloc_gdc_lut (); + pipe->scaler_pp_lut =hmm_alloc (sizeof (zoom_table),HMM_BO_PRIVATE ,0 ,NULL ,0 );if (pipe->scaler_pp_lut == mmgr_NULL) { ia_css_debug_dtrace(IA_CSS_DEBUG_ERROR,
@@ -2851,10 +2787,7 @@ int sh_css_params_map_and_store_default_gdc_lut(void)host_lut_store ((void *)zoom_table); -if (!IS_ISP2401 ) - default_gdc_lut =hmm_alloc (sizeof (zoom_table),HMM_BO_PRIVATE ,0 ,NULL ,0 ); -else - default_gdc_lut =sh_css_params_alloc_gdc_lut (); + default_gdc_lut =hmm_alloc (sizeof (zoom_table),HMM_BO_PRIVATE ,0 ,NULL ,0 );if (default_gdc_lut == mmgr_NULL)return -ENOMEM ;
@@ -3450,18 +3383,12 @@ sh_css_params_write_to_ddr_internal(if (binary->info->sp.enable.sc) {u32 enable_conv; -size_t bytes; - -if (!IS_ISP2401 ) - bytes =ISP2400_SCTBL_BYTES (binary); -else - bytes =ISP2401_SCTBL_BYTES (binary); enable_conv = params->shading_settings.enable_shading_table_conversion; buff_realloced =reallocate_buffer (&ddr_map->sc_tbl, &ddr_map_size->sc_tbl, - bytes, +SCTBL_BYTES (binary), params->sc_table_changed, &err);if (err) {
@@ -3546,28 +3473,6 @@ sh_css_params_write_to_ddr_internal( } } -/* DPC configuration is made pipe specific to allow flexibility in positioning of the -* DPC kernel. The code below sets the pipe specific configuration to -* individual binaries. */ -if (IS_ISP2401 && - params->pipe_dpc_config_changed[pipe_id] && binary->info->sp.enable.dpc) { -unsigned int size = - stage->binary->info->mem_offsets.offsets.param->dmem.dp.size; - -unsigned int offset = - stage->binary->info->mem_offsets.offsets.param->dmem.dp.offset; - -if (size) { -ia_css_dp_encode ((struct sh_css_isp_dp_params *) - &binary->mem_params.params[IA_CSS_PARAM_CLASS_PARAM ][IA_CSS_ISP_DMEM ].address[offset], - ¶ms->pipe_dp_config[pipe_id], size); - - params->isp_params_changed = true; - params->isp_mem_params_changed[pipe_id][stage->stage_num][IA_CSS_ISP_DMEM ] = - true; - } - } -if (params->config_changed[IA_CSS_MACC_ID ] && binary->info->sp.enable.macc) {unsigned int i, j, idx;unsigned int idx_map[] = {
@@ -3649,13 +3554,7 @@ sh_css_params_write_to_ddr_internal(if (!params->pipe_dvs_6axis_config[pipe_id]) {struct ia_css_resolution dvs_offset = {0 }; -if (!IS_ISP2401 ) { - dvs_offset.width = (PIX_SHIFT_FILTER_RUN_IN_X + binary->dvs_envelope.width) /2 ; - }else { -if (binary->dvs_envelope.width || binary->dvs_envelope.height) { - dvs_offset.width = (PIX_SHIFT_FILTER_RUN_IN_X + binary->dvs_envelope.width) /2 ; - } - } + dvs_offset.width = (PIX_SHIFT_FILTER_RUN_IN_X + binary->dvs_envelope.width) /2 ; dvs_offset.height = (PIX_SHIFT_FILTER_RUN_IN_Y + binary->dvs_envelope.height) /2 ; params->pipe_dvs_6axis_config[pipe_id] =
Signature · 1 line
2.33.1
PATCH v2 6/12 media: atomisp: sh_css_params: cleanup the code
In reply to Mauro Carvalho ChehabNow that the tests for the new ISP2401 input system were dropped, simplify the code, making it closer to the Intel Aero device driver.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
drivers/staging/media/atomisp/pci/sh_css.c | 6 +- .../staging/media/atomisp/pci/sh_css_params.c | 92 +++---------------- .../staging/media/atomisp/pci/sh_css_params.h | 8 -- 3 files changed, 15 insertions(+), 91 deletions(-)
drivers/staging/media/atomisp/pci/sh_css.c +4 -2
@@ -2250,8 +2250,10 @@ ia_css_pipe_destroy(struct ia_css_pipe *pipe)break ; } -sh_css_params_free_gdc_lut (pipe->scaler_pp_lut); - pipe->scaler_pp_lut = mmgr_NULL; +if (pipe->scaler_pp_lut != mmgr_NULL) { +hmm_free (pipe->scaler_pp_lut); + pipe->scaler_pp_lut = mmgr_NULL; + } my_css.active_pipes[ia_css_pipe_get_pipe_num (pipe)] =NULL ;sh_css_pipe_free_shading_table (pipe);
drivers/staging/media/atomisp/pci/sh_css_params.c +11 -81
171 lines not on this page · raw message
drivers/staging/media/atomisp/pci/sh_css_params.h +0 -8
@@ -121,8 +121,6 @@ struct ia_css_isp_parameters {bool dvs2_coef_table_changed;bool morph_table_changed;bool sc_table_changed; -bool sc_table_dirty; -unsigned int sc_table_last_pipe_num;bool anr_thres_changed;/* ---- deprecated: replaced with pipe_dvs_6axis_config_changed ---- */ bool dvs_6axis_config_changed;
@@ -168,12 +166,6 @@ ia_css_params_alloc_convert_sctbl(struct ia_css_isp_config *sh_css_pipe_isp_config_get (struct ia_css_pipe *pipe); -/* ipu address allocation/free for gdc lut */ -ia_css_ptr -sh_css_params_alloc_gdc_lut (void ); -void -sh_css_params_free_gdc_lut (ia_css_ptr addr); -int sh_css_params_map_and_store_default_gdc_lut (void );
Signature · 1 line
2.33.1
PATCH v2 7/12 media: atomisp: remove #ifdef HAS_NO_HMEM
In reply to Mauro Carvalho ChehabThis is not defined anywhere, so, solve the ifdefs, getting rid of them.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../atomisp/pci/isp/kernels/bh/bh_2/ia_css_bh.host.c | 2 -- .../raw_aa_binning_1.0/ia_css_raa.host.c | 2 -- .../pci/isp/kernels/s3a/s3a_1.0/ia_css_s3a.host.c | 5 ----- .../media/atomisp/pci/runtime/binary/src/binary.c | 4 ---- drivers/staging/media/atomisp/pci/sh_css_params.c | 10 ---------- 5 files changed, 23 deletions(-)
drivers/staging/media/atomisp/pci/isp/kernels/bh/bh_2/ia_css_bh.host.c +0 -2
@@ -13,7 +13,6 @@* more details. */ -#if !defined(HAS_NO_HMEM )#include "ia_css_types.h" #include "sh_css_internal.h"
@@ -63,4 +62,3 @@ ia_css_bh_encode(uDIGIT_FITTING (from->ae_y_coef_b,16 ,SH_CSS_AE_YCOEF_SHIFT ); } -#endif
drivers/staging/media/atomisp/pci/isp/kernels/raw_aa_binning/raw_aa_binning_1.0/ia_css_raa.host.c +0 -2
@@ -13,7 +13,6 @@* more details. */ -#if !defined(HAS_NO_HMEM )#include "ia_css_types.h" #include "sh_css_internal.h"
@@ -32,4 +31,3 @@ ia_css_raa_encode( (void )from; } -#endif
drivers/staging/media/atomisp/pci/isp/kernels/s3a/s3a_1.0/ia_css_s3a.host.c +0 -5
@@ -227,10 +227,6 @@ ia_css_s3a_hmem_decode(struct ia_css_3a_statistics *host_stats, const struct ia_css_bh_table *hmem_buf) { -#if defined(HAS_NO_HMEM ) - (void )host_stats; - (void )hmem_buf; -#else struct ia_css_3a_rgby_output *out_ptr;int i;
@@ -291,7 +287,6 @@ ia_css_s3a_hmem_decode( out_ptr[0 ].g -= diff; out_ptr[0 ].b -= diff; out_ptr[0 ].y -= diff; -#endif }void
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +0 -4
@@ -805,11 +805,7 @@ ia_css_binary_3a_grid_info(const struct ia_css_binary *binary, s3a_info->deci_factor_log2 = binary->deci_factor_log2; s3a_info->elem_bit_depth =SH_CSS_BAYER_BITS ; s3a_info->use_dmem = binary->info->sp.s3a.s3atbl_use_dmem; -#if defined(HAS_NO_HMEM ) - s3a_info->has_histogram =1 ; -#else s3a_info->has_histogram =0 ; -#endif IA_CSS_LEAVE_ERR_PRIVATE (err);return err; }
drivers/staging/media/atomisp/pci/sh_css_params.c +0 -10
@@ -16,12 +16,10 @@#include "gdc_device.h" /* gdc_lut_store(), ... */ #include "isp.h" /* ISP_VEC_ELEMBITS */ #include "vamem.h" -#if !defined(HAS_NO_HMEM )#ifndef __INLINE_HMEM__#define __INLINE_HMEM__#endif #include "hmem.h" -#endif /* !defined(HAS_NO_HMEM) */ #define IA_CSS_INCLUDE_PARAMETERS #define IA_CSS_INCLUDE_ACC_PARAMETERS
@@ -1489,10 +1487,8 @@ ia_css_translate_3a_statistics(ia_css_s3a_vmem_decode (host_stats, isp_stats->vmem_stats_hi, isp_stats->vmem_stats_lo); } -#if !defined(HAS_NO_HMEM )IA_CSS_LOG ("3A: HMEM" );ia_css_s3a_hmem_decode (host_stats, isp_stats->hmem_stats); -#endif IA_CSS_LEAVE ("void" ); }
@@ -2157,9 +2153,7 @@ ia_css_isp_3a_statistics_allocate(const struct ia_css_3a_grid_info *grid) me->vmem_size =ISP_S3ATBL_HI_LO_STRIDE_BYTES * grid->aligned_height; } -#if !defined(HAS_NO_HMEM ) me->hmem_size =sizeof_hmem (HMEM0_ID ); -#endif /* All subsections need to be aligned to the system bus width */ me->dmem_size =CEIL_MUL (me->dmem_size,HIVE_ISP_DDR_WORD_BYTES );
@@ -4148,12 +4142,8 @@ ia_css_3a_statistics_allocate(const struct ia_css_3a_grid_info *grid) me->data =kvmalloc (grid_size *sizeof (*me->data),GFP_KERNEL );if (!me->data) goto err; -#if !defined(HAS_NO_HMEM )/* No weighted histogram, no structure, treat the histogram data as a byte dump in a byte array */ me->rgby_data =kvmalloc (sizeof_hmem (HMEM0_ID ),GFP_KERNEL ); -#else - me->rgby_data =NULL ; -#endif IA_CSS_LEAVE ("return=%p" , me);return me;
Signature · 1 line
2.33.1
PATCH v2 8/12 media: atomisp: get rid of USE_WINDOWS_BINNING_FACTOR tests
In reply to Mauro Carvalho ChehabThis is meant to select a platform-dependent factor between Linux and Windows. It makes no sense to keep it on Kernel.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../media/atomisp/pci/ia_css_stream_public.h | 10 ++++------ .../media/atomisp/pci/sh_css_param_shading.c | 16 ---------------- 2 files changed, 4 insertions(+), 22 deletions(-)
drivers/staging/media/atomisp/pci/ia_css_stream_public.h +4 -6
@@ -102,12 +102,10 @@ struct ia_css_stream_config { isys_config[IA_CSS_STREAM_MAX_ISYS_STREAM_PER_CH ];struct ia_css_stream_input_config input_config; -/* Currently, Android and Windows platforms interpret the binning_factor parameter -* differently. In Android, the binning factor is expressed in the form -* 2^N * 2^N, whereas in Windows platform, the binning factor is N*N -* To use the Windows method of specification, the caller has to define -* macro USE_WINDOWS_BINNING_FACTOR. This is for backward compatibility only -* and will be deprecated. In the future,all platforms will use the N*N method +/* +* Currently, Linux and Windows platforms interpret the binning_factor +* parameter differently. In Linux, the binning factor is expressed +* in the form 2^N * 2^N */ /* ISP2401 */ unsigned int sensor_binning_factor;/** Binning factor used by sensor
drivers/staging/media/atomisp/pci/sh_css_param_shading.c +0 -16
@@ -271,15 +271,6 @@ prepare_shading_table(const struct ia_css_shading_table *in_table, bds_denominator - binary->info->sp.pipeline.top_cropping; -#if !defined(USE_WINDOWS_BINNING_FACTOR ) -/* @deprecated{This part of the code will be replaced by the code -* in the #else section below to make the calculation same across -* all platforms. -* Android and Windows platforms interpret the binning_factor parameter -* differently. In Android, the binning factor is expressed in the form -* 2^N * 2^N, whereas in Windows platform, the binning factor is N*N} -*/ -/* We take into account the binning done by the sensor. We do this by cropping the non-binned part of the shading table and then increasing the size of a grid cell with this same binning factor. */
@@ -291,13 +282,6 @@ prepare_shading_table(const struct ia_css_shading_table *in_table, left_padding <<= sensor_binning; right_padding <<= sensor_binning; top_padding <<= sensor_binning; -#else - input_width *= sensor_binning; - input_height *= sensor_binning; - left_padding *= sensor_binning; - right_padding *= sensor_binning; - top_padding *= sensor_binning; -#endif /*USE_WINDOWS_BINNING_FACTOR*/ /* during simulation, the used resolution can exceed the sensor resolution, so we clip it. */
Signature · 1 line
2.33.1
PATCH v2 9/12 media: atomisp: get rid of #ifdef HAS_BL
In reply to Mauro Carvalho ChehabThis does nothing but declare extern to a non-existing var.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
drivers/staging/media/atomisp/pci/sh_css_firmware.h | 3 --- 1 file changed, 3 deletions(-)
drivers/staging/media/atomisp/pci/sh_css_firmware.h +0 -3
@@ -29,9 +29,6 @@ struct sh_css_fw_bi_file_h { };extern struct ia_css_fw_info sh_css_sp_fw; -#if defined(HAS_BL ) -extern struct ia_css_fw_info sh_css_bl_fw; -#endif /* HAS_BL */ extern struct ia_css_blob_descr *sh_css_blob_info;extern unsigned int sh_css_num_binaries;
Signature · 1 line
2.33.1
PATCH v2 10/12 media: atomisp: get rid of sctbl_legacy_*
In reply to Mauro Carvalho ChehabThose seem to be used only on certain ISP2401 firmwares that aren't supported by the driver. So, get rid of them.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../atomisp/pci/runtime/binary/interface/ia_css_binary.h | 2 -- .../staging/media/atomisp/pci/runtime/binary/src/binary.c | 6 ------ drivers/staging/media/atomisp/pci/sh_css_param_shading.c | 8 ++++---- 3 files changed, 4 insertions(+), 12 deletions(-)
drivers/staging/media/atomisp/pci/runtime/binary/interface/ia_css_binary.h +0 -2
@@ -130,8 +130,6 @@ struct ia_css_binary {int sctbl_width_per_color;int sctbl_aligned_width_per_color;int sctbl_height; -int sctbl_legacy_width_per_color; -int sctbl_legacy_height;struct ia_css_sdis_info dis;struct ia_css_resolution dvs_envelope;bool online;
drivers/staging/media/atomisp/pci/runtime/binary/src/binary.c +0 -6
@@ -1339,18 +1339,12 @@ ia_css_binary_fill_info(const struct ia_css_binary_xinfo *xinfo, binary->sctbl_width_per_color =_ISP2401_SCTBL_WIDTH_PER_COLOR (isp_internal_width, s3a_log_deci); binary->sctbl_aligned_width_per_color =SH_CSS_MAX_SCTBL_ALIGNED_WIDTH_PER_COLOR ; binary->sctbl_height =_ISP2401_SCTBL_HEIGHT (isp_internal_height, s3a_log_deci); - binary->sctbl_legacy_width_per_color =_ISP_SCTBL_LEGACY_WIDTH_PER_COLOR (sc_3a_dis_padded_width, s3a_log_deci); - binary->sctbl_legacy_height =_ISP_SCTBL_LEGACY_HEIGHT (sc_3a_dis_height, s3a_log_deci); } }else { binary->sctbl_width_per_color =0 ; binary->sctbl_aligned_width_per_color =0 ; binary->sctbl_height =0 ; -if (IS_ISP2401 ) { - binary->sctbl_legacy_width_per_color =0 ; - binary->sctbl_legacy_height =0 ; - } } ia_css_sdis_init_info(&binary->dis, sc_3a_dis_width,
drivers/staging/media/atomisp/pci/sh_css_param_shading.c +4 -4
@@ -242,8 +242,8 @@ prepare_shading_table(const struct ia_css_shading_table *in_table,if (!in_table) {sh_css_params_shading_id_table_generate (target_table, - binary->sctbl_legacy_width_per_color, - binary->sctbl_legacy_height); + binary->sctbl_width_per_color, + binary->sctbl_height);return ; }
@@ -290,8 +290,8 @@ prepare_shading_table(const struct ia_css_shading_table *in_table,/* This prepare_shading_table() function is called only in legacy API (not in new API). Then, the legacy shading table width and height should be used. */ - table_width = binary->sctbl_legacy_width_per_color; - table_height = binary->sctbl_legacy_height; + table_width = binary->sctbl_width_per_color; + table_height = binary->sctbl_height; result =ia_css_shading_table_alloc (table_width, table_height);if (!result) {
Signature · 1 line
2.33.1
PATCH v2 11/12 media: atomisp: sh_css_param_shading: fix comments coding style
In reply to Mauro Carvalho ChehabThe comments are not following Kernel coding style.
Also, there are two missing comments that are found at the Intel Aero device driver code. Add them.
No functional changes.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
.../media/atomisp/pci/sh_css_param_shading.c | 58 ++++++++++++------- 1 file changed, 37 insertions(+), 21 deletions(-)
drivers/staging/media/atomisp/pci/sh_css_param_shading.c +37 -21
@@ -118,8 +118,10 @@ crop_and_interpolate(unsigned int cropped_width,int ty, src_y0, src_y1;unsigned int sy0, sy1, dy0, dy1, divy; -/* calculate target point and make sure it falls within -the table */ +/* +* calculate target point and make sure it falls within +* the table +*/ ty = out_start_row + i * out_cell_size;/* calculate closest source points in shading table and
@@ -166,19 +168,24 @@ crop_and_interpolate(unsigned int cropped_width, src_x1 =clamp (src_x1,0 , (int )table_width -1 ); tx =min (clamp (tx,0 , (int )sensor_width -1 ), (int )table_cell_w); -/* calculate closest source points for distance -computation */ +/* +* calculate closest source points for distance +* computation +*/ sx0 =min (src_x0 * in_cell_size, sensor_width -1 ); sx1 =min (src_x1 * in_cell_size, sensor_width -1 ); -/* calculate distances between source and target -pixels */ +/* +* calculate distances between source and target +* pixels +*/ dx0 = tx - sx0; dx1 = sx1 - tx; divx = sx1 - sx0;/* if we're at the edge, we just use the closest -point still in the grid. We make up for the divider -in this case by setting the distance to -out_cell_size, since it's actually 0. */ +* point still in the grid. We make up for the divider +* in this case by setting the distance to +* out_cell_size, since it's actually 0. +*/ if (divx ==0 ) { dx0 =1 ; divx =1 ;
@@ -271,20 +278,26 @@ prepare_shading_table(const struct ia_css_shading_table *in_table, bds_denominator - binary->info->sp.pipeline.top_cropping; -/* We take into account the binning done by the sensor. We do this -by cropping the non-binned part of the shading table and then -increasing the size of a grid cell with this same binning factor. */ +/* +* We take into account the binning done by the sensor. We do this +* by cropping the non-binned part of the shading table and then +* increasing the size of a grid cell with this same binning factor. +*/ input_width <<= sensor_binning; input_height <<= sensor_binning; -/* We also scale the padding by the same binning factor. This will -make it much easier later on to calculate the padding of the -shading table. */ +/* +* We also scale the padding by the same binning factor. This will +* make it much easier later on to calculate the padding of the +* shading table. +*/ left_padding <<= sensor_binning; right_padding <<= sensor_binning; top_padding <<= sensor_binning; -/* during simulation, the used resolution can exceed the sensor -resolution, so we clip it. */ +/* +* during simulation, the used resolution can exceed the sensor +* resolution, so we clip it. +*/ input_width =min (input_width, in_table->sensor_width); input_height =min (input_height, in_table->sensor_height);
@@ -302,8 +315,10 @@ prepare_shading_table(const struct ia_css_shading_table *in_table, result->sensor_height = in_table->sensor_height; result->fraction_bits = in_table->fraction_bits; -/* now we crop the original shading table and then interpolate to the -requested resolution and decimation factor. */ +/* +* now we crop the original shading table and then interpolate to the +* requested resolution and decimation factor. +*/ for (i =0 ; i <IA_CSS_SC_NUM_COLORS ; i++) { crop_and_interpolate(input_width, input_height, left_padding, right_padding, top_padding,
@@ -360,9 +375,10 @@ ia_css_shading_table_free(struct ia_css_shading_table *table)if (!table)return ; -/* We only output logging when the table is not NULL, otherwise +/* +* We only output logging when the table is not NULL, otherwise * logs will give the impression that a table was freed. -* */ +*/ IA_CSS_ENTER ("" );for (i =0 ; i <IA_CSS_SC_NUM_COLORS ; i++) {
Signature · 1 line
2.33.1
PATCH v2 12/12 media: atomisp: sh_css_sp: better support the current firmware
In reply to Mauro Carvalho ChehabAs we're using Intel Aero firmware, make the code closer to the driver for such device.
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH v2 00/12] at: https://lore.kernel.org/all/[email protected]/
drivers/staging/media/atomisp/pci/sh_css_sp.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
drivers/staging/media/atomisp/pci/sh_css_sp.c +8 -9
@@ -1001,6 +1001,7 @@ sh_css_sp_init_stage(struct ia_css_binary *binary,/* Make sure binary name is smaller than allowed string size */ assert (strlen (binary_name) <SH_CSS_MAX_BINARY_NAME -1 );strscpy (sh_css_isp_stage.binary_name, binary_name,SH_CSS_MAX_BINARY_NAME ); + sh_css_isp_stage.binary_name[SH_CSS_MAX_BINARY_NAME -1 ] =0 ; sh_css_isp_stage.mem_initializers = *isp_mem_if;/*
@@ -1032,16 +1033,14 @@ sh_css_sp_init_stage(struct ia_css_binary *binary,return err;#ifdef ISP2401 -if (stage ==0 ) { - pipe =find_pipe_by_num (sh_css_sp_group.pipe[thread_id].pipe_num); -if (!pipe) -return -EINVAL ; + pipe =find_pipe_by_num (sh_css_sp_group.pipe[thread_id].pipe_num); +if (!pipe) +return -EINVAL ; -if (args->in_frame) -ia_css_get_crop_offsets (pipe, &args->in_frame->info); -else -ia_css_get_crop_offsets (pipe, &binary->in_frame_info); - } +if (args->in_frame) +ia_css_get_crop_offsets (pipe, &args->in_frame->info); +else if (&binary->in_frame_info) +ia_css_get_crop_offsets (pipe, &binary->in_frame_info);#else (void )pipe;/*avoid build warning*/ #endif
Signature · 1 line
2.33.1