xilinx: video: add skeleton drivers for zynqmp DP
Subsystems (3)
cover xilinx: video: add skeleton drivers for zynqmp DP
Hi,
add skeleton drivers for display port and display port DMA. The purpose of having sketon drivers is to use the whole power domain infrastructure is used. Without driver power domain driver is not asking for enabling power for these devices. That's why having simple driver is necessary because OS doesn't need to have a way to ask for enabling power for these devices.
Thanks,
Michal
Michal Simek (2):
video: Add skeleton driver for ZynqMP Display port driver
dma: xilinx: Add Display Port DMA driver
drivers/dma/Kconfig | 7 ++++ drivers/dma/Makefile | 1 + drivers/dma/xilinx_dpdma.c | 43 +++++++++++++++++++++++ drivers/video/Kconfig | 8 +++++ drivers/video/Makefile | 1 + drivers/video/zynqmp_dpsub.c | 66 ++++++++++++++++++++++++++++++++++++ 6 files changed, 126 insertions(+) create mode 100644 drivers/dma/xilinx_dpdma.c create mode 100644 drivers/video/zynqmp_dpsub.c
Signature · 1 line
2.35.1
PATCH 1/2 video: Add skeleton driver for ZynqMP Display port driver
The reason for this driver is to use call power management driver to enable it in PMUFW. There is missing functionality now but should be added in near future.
---
drivers/video/Kconfig | 8 +++++ drivers/video/Makefile | 1 + drivers/video/zynqmp_dpsub.c | 66 ++++++++++++++++++++++++++++++++++++ 3 files changed, 75 insertions(+) create mode 100644 drivers/video/zynqmp_dpsub.c
drivers/video/Kconfig +8 -0
@@ -680,6 +680,14 @@ config VIDEO_SEPS525 Enable support for the Syncoam PM-OLED display driver (RGB 160x128). Currently driver is supporting only SPI interface. +config VIDEO_ZYNQMP_DPSUB + bool "Enable video support for ZynqMP Display Port" + depends on DM_VIDEO && ZYNQMP_POWER_DOMAIN + help + Enable support for Xilinx ZynqMP Display Port. Currently this file + is used as placeholder for driver. The main reason is to record + compatible string and calling power domain driver. + source "drivers/video/nexell/Kconfig" config VIDEO
drivers/video/Makefile +1 -0
@@ -74,6 +74,7 @@ obj-$(CONFIG_VIDEO_TEGRA20) += tegra.o obj-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o obj-$(CONFIG_VIDEO_VESA) += vesa.o obj-$(CONFIG_VIDEO_SEPS525) += seps525.o +obj-$(CONFIG_VIDEO_ZYNQMP_DPSUB) += zynqmp_dpsub.o obj-y += bridge/ obj-y += sunxi/
drivers/video/zynqmp_dpsub.c new file +66 -0
66 lines not on this page · raw message
Signature · 1 line
2.35.1
PATCH 2/2 dma: xilinx: Add Display Port DMA driver
In reply to Michal SimekDisplay Port (DP) has own dma driver that's why add this skeleton driver only for handling power domain setting and send configuration object to PMUFW to enable it.
---
drivers/dma/Kconfig | 7 +++++++ drivers/dma/Makefile | 1 + drivers/dma/xilinx_dpdma.c | 43 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 51 insertions(+) create mode 100644 drivers/dma/xilinx_dpdma.c
drivers/dma/Kconfig +7 -0
@@ -68,6 +68,13 @@ config APBH_DMA help Enable APBH DMA driver. +config XILINX_DPDMA + bool "Enable ZynqMP Display Port DMA driver" + depends on DMA && ZYNQMP_POWER_DOMAIN + help + Enable support for Xilinx ZynqMP Display DMA driver. Currently + this file is used as placeholder for driver. The main reason is + to record compatible string and calling power domain driver. if APBH_DMA config APBH_DMA_BURST
drivers/dma/Makefile +1 -0
@@ -13,5 +13,6 @@ obj-$(CONFIG_SANDBOX_DMA) += sandbox-dma-test.o obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o obj-$(CONFIG_TI_EDMA3) += ti-edma3.o obj-$(CONFIG_DMA_LPC32XX) += lpc32xx_dma.o +obj-$(CONFIG_XILINX_DPDMA) += xilinx_dpdma.o obj-y += ti/
drivers/dma/xilinx_dpdma.c new file +43 -0
43 lines not on this page · raw message
Signature · 1 line
2.35.1
Michal Simek
Appliedst 23. 2. 2022 v 15:52 odesílatel Michal Simek <[email protected]> napsal:
Quoted 27 lines
Hi,
add skeleton drivers for display port and display port DMA. The purpose of having sketon drivers is to use the whole power domain infrastructure is used. Without driver power domain driver is not asking for enabling power for these devices. That's why having simple driver is necessary because OS doesn't need to have a way to ask for enabling power for these devices.
Thanks,
MichalMichal Simek (2):
video: Add skeleton driver for ZynqMP Display port driver
dma: xilinx: Add Display Port DMA driverdrivers/dma/Kconfig | 7 ++++ drivers/dma/Makefile | 1 + drivers/dma/xilinx_dpdma.c | 43 +++++++++++++++++++++++ drivers/video/Kconfig | 8 +++++ drivers/video/Makefile | 1 + drivers/video/zynqmp_dpsub.c | 66 ++++++++++++++++++++++++++++++++++++ 6 files changed, 126 insertions(+) create mode 100644 drivers/dma/xilinx_dpdma.c create mode 100644 drivers/video/zynqmp_dpsub.c
Quoted 3 lines
--
2.35.1
applied.
M
Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs