Skip to contentSkip to conversation

Add efitextmode command

PATCH Superseded Glenn Washburn 3 participants 10 messages May 12, 2022 – May 13, 2022

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover Add efitextmode command

This patch add the efitextmode command which is used for showing all available text output modes and setting a specific mode. Its basically the equivalent of the EFI Shell's "mode" command and its output looks similar. The main difference is that its shows the mode number in the listing and takes a mode number when setting the mode. As a convenience it can take arguments "min" or "max" to set to the minimum or maximum mode.

Glenn

Glenn Washburn (2):
efi: Add efitextmode command for getting/setting the text mode
resolution
docs: Add documentation for the efitextmode command

 docs/grub.texi                       |  23 ++++++
 grub-core/Makefile.core.def          |   6 ++
 grub-core/commands/efi/efitextmode.c | 118 +++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 grub-core/commands/efi/efitextmode.c
Signature · 1 line
2.34.1
#1 lore raw

PATCH 1/2 efi: Add efitextmode command for getting/setting the text mode resolution

This command is meant to behave similarly to the 'mode' command of the EFI Shell application. One difference is that to set the mode the mode number is given, not the rows and columns of the desired mode. Also supported are the arguments "min" and "max", which set the mode to the minimum and maximum mode respectively as calculated by the columns * rows of that mode.

---
 grub-core/Makefile.core.def          |   6 ++
 grub-core/commands/efi/efitextmode.c | 118 +++++++++++++++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 grub-core/commands/efi/efitextmode.c
grub-core/Makefile.core.def +6 -0
index 726f51be7..b22e48f0f 100644
@@ -813,6 +813,12 @@ module = {
   enable = efi;
 };
 
+module = {
+  name = efitextmode;
+  efi = commands/efi/efitextmode.c;
+  enable = efi;
+};
+
 module = {
   name = blocklist;
   common = commands/blocklist.c;
grub-core/commands/efi/efitextmode.c new file +118 -0

118 lines not on this page · raw message

Signature · 1 line
2.34.1
#5 lore raw

PATCH 2/2 docs: Add documentation for the efitextmode command

In reply to Glenn Washburn
---
 docs/grub.texi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
docs/grub.texi +23 -0
index 3b5522b0a..50ef28edd 100644
@@ -4202,6 +4202,7 @@ you forget a command, you can run the command @command{help}
 * distrust::                    Remove a pubkey from trusted keys
 * drivemap::                    Map a drive to another
 * echo::                        Display a line of text
+* efitextmode::                 Set/Get text output mode resolution
 * eval::                        Evaluate agruments as GRUB commands
 * export::                      Export an environment variable
 * false::                       Do nothing, unsuccessfully
@@ -4638,6 +4639,28 @@ character will print that character.
 @end deffn
 
 
+@node efitextmode
+@subsection efitextmode
+
+@deffn Command efitextmode [min | max | mode_num]
+When used with no arguments displays all available text output modes. The
+set mode determines the columns and rows of the text display when in
+text mode. An asterisk, @samp{*}, will be at the end of the line of the
+currently set mode.
+
+Otherwise the command only takes a single parameter, which can be
+@samp{min}, @samp{max}, or a mode number given by the listing when run
+with no arguments. These arguments set the mode to the minimum, maximum,
+and particular mode respectively.
+
+By default GRUB will start in whatever mode the EFI firmware defaults to.
+There are firmwares known to setup the default mode such that output
+behaves strangely. Setting the mode can fix this.
+
+Note: This command is only available on EFI platforms.
+@end deffn
+
+
 @node eval
 @subsection eval
 
Signature · 1 line
2.34.1
#6 lore raw

Re: [PATCH 2/2] docs: Add documentation for the efitextmode command

Dear Glenn,

Thank you for the patch. Two small nits.

Am 12.05.22 um 05:07 schrieb Glenn Washburn:

Quoted 1 line

*Add documentation for …* could be abbreviated to *Document …* in the git commit message summary.

Quoted 26 lines
---
  docs/grub.texi | 23 +++++++++++++++++++++++
  1 file changed, 23 insertions(+)
docs/grub.texi +7 -0
index 3b5522b0a..50ef28edd 100644
@@ -4202,6 +4202,7 @@ you forget a command, you can run the command @command{help}
 * distrust::                    Remove a pubkey from trusted keys
 * drivemap::                    Map a drive to another
 * echo::                        Display a line of text
+* efitextmode::                 Set/Get text output mode resolution
 * eval::                        Evaluate agruments as GRUB commands
 * export::                      Export an environment variable
 * false::                       Do nothing, unsuccessfully
@@ -4638,6 +4639,28 @@ character will print that character.
  @end deffn
 
 
+@node efitextmode
+@subsection efitextmode
+
+@deffn Command efitextmode [min | max | mode_num]
+When used with no arguments displays all available text output modes. The
+set mode determines the columns and rows of the text display when in

docs/grub.texi character will print that character. · line 4657

Quoted 10 lines
docs/grub.texi +10 -0
+text mode. An asterisk, @samp{*}, will be at the end of the line of the
+currently set mode.
+
+Otherwise the command only takes a single parameter, which can be
+@samp{min}, @samp{max}, or a mode number given by the listing when run
+with no arguments. These arguments set the mode to the minimum, maximum,
+and particular mode respectively.
+
+By default GRUB will start in whatever mode the EFI firmware defaults to.
+There are firmwares known to setup the default mode such that output

The verb *set up* is spelled with a space.

docs/grub.texi character will print that character. · line 4658

Quoted 1 line
docs/grub.texi +1 -0
+behaves strangely. Setting the mode can fix this.

Should your device be mentioned in the documentation, and one of the strangeness be described?

docs/grub.texi character will print that character. · line 4665

Quoted 7 lines
docs/grub.texi +5 -0
+
+Note: This command is only available on EFI platforms.
+@end deffn
+
+
  @node eval
  @subsection eval

Kind regards,

Paul

#2 lore raw

Re: [PATCH 1/2] efi: Add efitextmode command for getting/setting the text mode resolution

In reply to Glenn Washburn

Dear Glenn,

Thank you for the patch.

Am 12.05.22 um 05:07 schrieb Glenn Washburn:

Quoted 5 lines

This command is meant to behave similarly to the 'mode' command of the EFI Shell application. One difference is that to set the mode the mode number is given, not the rows and columns of the desired mode. Also supported are the arguments "min" and "max", which set the mode to the minimum and maximum mode respectively as calculated by the columns * rows of that mode.

Did you test this also with QEMU and OVMF?

Kind regards,

Paul

Quoted 148 lines
---
  grub-core/Makefile.core.def          |   6 ++
  grub-core/commands/efi/efitextmode.c | 118 +++++++++++++++++++++++++++
  2 files changed, 124 insertions(+)

create mode 100644 grub-core/commands/efi/efitextmode.c

grub-core/Makefile.core.def +6 -0
index 726f51be7..b22e48f0f 100644
@@ -813,6 +813,12 @@ module = {
    enable = efi;
  };
 
+module = {
+  name = efitextmode;
+  efi = commands/efi/efitextmode.c;
+  enable = efi;
+};
+
  module = {
    name = blocklist;
    common = commands/blocklist.c;
grub-core/commands/efi/efitextmode.c new file +118 -0
new file mode 100644
index 000000000..fb72aa6f3
@@ -0,0 +1,118 @@
+/* efitextmode.c - command to get/set text mode resolution */
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2003,2005,2006,2007,2009  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <grub/dl.h>
+#include <grub/misc.h>
+#include <grub/mm.h>
+#include <grub/command.h>
+#include <grub/i18n.h>
+#include <grub/efi/efi.h>
+#include <grub/efi/api.h>
+
+GRUB_MOD_LICENSE ("GPLv3+");
+
+static grub_err_t
+grub_cmd_efitextmode (grub_command_t cmd __attribute__ ((unused)),
+		      int argc, char **args)
+{
+  grub_efi_simple_text_output_interface_t *o;
+  unsigned long mode;
+  const char *p = NULL;
+  grub_efi_status_t status;
+  grub_efi_uintn_t columns, rows;
+  grub_efi_int32_t i;
+
+  if (argc > 1)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("at most one argument expected"));
+
+  o = grub_efi_system_table->con_out;
+
+  if (argc == 1)
+    {
+      if (grub_strcmp (args[0], "min") == 0)
+	mode = 0;
+      else if (grub_strcmp (args[0], "max") == 0)
+	mode = o->mode->max_mode - 1;
+      else
+	{
+	  mode = grub_strtoul (args[0], &p, 0);
+
+	  if (grub_errno != GRUB_ERR_NONE)
+	    return grub_errno;
+
+	  if (*args[0] == '\0' || *p != '\0')
+	    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+			       N_("non-numeric or invalid mode `%s'"),
+			       args[0]);
+	}
+
+      if (mode < (unsigned long) o->mode->max_mode)
+	{
+	  if (mode != (unsigned long) o->mode->mode)
+	    {
+	      status = efi_call_2 (o->set_mode, o, (grub_efi_int32_t) mode);
+	      if (status == GRUB_EFI_SUCCESS)
+		;
+	      else if (status == GRUB_EFI_DEVICE_ERROR)
+		return grub_error (GRUB_ERR_BAD_DEVICE,
+				   N_("device error: could not set requested"
+				      " mode"));
+	      else if (status == GRUB_EFI_UNSUPPORTED)
+		return grub_error (GRUB_ERR_OUT_OF_RANGE,
+				   N_("invalid mode: number not valid"));
+	      else
+		return grub_error (GRUB_ERR_BAD_OS,
+				   N_("unexpected EFI error number: `%u'"),
+				   (unsigned) status);
+	    }
+	}
+      else
+	return grub_error (GRUB_ERR_BAD_ARGUMENT,
+			   N_("invalid mode: `%lu' is greater than maximum"
+			      " mode `%lu'"),
+			   mode, (unsigned long) o->mode->max_mode);
+    }
+
+  if (argc == 0)
+    {
+      grub_printf_ (N_("Available modes for console output device.\n"));
+
+      for (i=0; i < o->mode->max_mode; i++)
+	if (GRUB_EFI_SUCCESS == efi_call_4 (o->query_mode, o, i,
+					    &columns, &rows))
+	  grub_printf_ (N_(" [%lu]  Col %5u Row %5u %c\n"),
+			(unsigned long) i, (unsigned) columns, (unsigned) rows,
+			(i == o->mode->mode) ? '*' : ' ');
+    }
+
+  return GRUB_ERR_NONE;
+}
+
+static grub_command_t cmd;
+
+GRUB_MOD_INIT(cmp)
+{
+  cmd = grub_register_command ("efitextmode", grub_cmd_efitextmode,
+			       N_("[min|max|mode_num]"), N_("Get or set EFI text mode."));
+}
+
+GRUB_MOD_FINI(cmp)
+{
+  grub_unregister_command (cmd);
+}
#3 lore raw

Re: [PATCH 1/2] efi: Add efitextmode command for getting/setting the text mode resolution

Hi Paul,

Quoted 5 lines · On Thu, 12 May 2022 08:10:56 +0200 Paul Menzel <[email protected]> wrote:

Dear Glenn,

Thank you for the patch.

Quoted 8 lines

Am 12.05.22 um 05:07 schrieb Glenn Washburn:

Quoted 5 lines

This command is meant to behave similarly to the 'mode' command of the EFI Shell application. One difference is that to set the mode the mode number is given, not the rows and columns of the desired mode. Also supported are the arguments "min" and "max", which set the mode to the minimum and maximum mode respectively as calculated by the columns * rows of that mode.

Did you test this also with QEMU and OVMF?

Yes, although with QEMU with -nographic and the output going through serial, though not using GRUB's serial terminal. So its still using the efi console. Is there a reason you're asking? Something not working as expected?

Glenn

Quoted 155 lines

Kind regards,

Paul

Quoted 148 lines
---
  grub-core/Makefile.core.def          |   6 ++
  grub-core/commands/efi/efitextmode.c | 118 +++++++++++++++++++++++++++
  2 files changed, 124 insertions(+)

create mode 100644 grub-core/commands/efi/efitextmode.c

grub-core/Makefile.core.def +6 -0
index 726f51be7..b22e48f0f 100644
@@ -813,6 +813,12 @@ module = {
    enable = efi;
  };
 
+module = {
+  name = efitextmode;
+  efi = commands/efi/efitextmode.c;
+  enable = efi;
+};
+
  module = {
    name = blocklist;
    common = commands/blocklist.c;
grub-core/commands/efi/efitextmode.c new file +118 -0
new file mode 100644
index 000000000..fb72aa6f3
@@ -0,0 +1,118 @@
+/* efitextmode.c - command to get/set text mode resolution */
+/*
+ *  GRUB  --  GRand Unified Bootloader
+ *  Copyright (C) 2003,2005,2006,2007,2009  Free Software Foundation, Inc.
+ *
+ *  GRUB is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 3 of the License, or
+ *  (at your option) any later version.
+ *
+ *  GRUB is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with GRUB.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <grub/dl.h>
+#include <grub/misc.h>
+#include <grub/mm.h>
+#include <grub/command.h>
+#include <grub/i18n.h>
+#include <grub/efi/efi.h>
+#include <grub/efi/api.h>
+
+GRUB_MOD_LICENSE ("GPLv3+");
+
+static grub_err_t
+grub_cmd_efitextmode (grub_command_t cmd __attribute__ ((unused)),
+		      int argc, char **args)
+{
+  grub_efi_simple_text_output_interface_t *o;
+  unsigned long mode;
+  const char *p = NULL;
+  grub_efi_status_t status;
+  grub_efi_uintn_t columns, rows;
+  grub_efi_int32_t i;
+
+  if (argc > 1)
+    return grub_error (GRUB_ERR_BAD_ARGUMENT, N_("at most one argument expected"));
+
+  o = grub_efi_system_table->con_out;
+
+  if (argc == 1)
+    {
+      if (grub_strcmp (args[0], "min") == 0)
+	mode = 0;
+      else if (grub_strcmp (args[0], "max") == 0)
+	mode = o->mode->max_mode - 1;
+      else
+	{
+	  mode = grub_strtoul (args[0], &p, 0);
+
+	  if (grub_errno != GRUB_ERR_NONE)
+	    return grub_errno;
+
+	  if (*args[0] == '\0' || *p != '\0')
+	    return grub_error (GRUB_ERR_BAD_ARGUMENT,
+			       N_("non-numeric or invalid mode `%s'"),
+			       args[0]);
+	}
+
+      if (mode < (unsigned long) o->mode->max_mode)
+	{
+	  if (mode != (unsigned long) o->mode->mode)
+	    {
+	      status = efi_call_2 (o->set_mode, o, (grub_efi_int32_t) mode);
+	      if (status == GRUB_EFI_SUCCESS)
+		;
+	      else if (status == GRUB_EFI_DEVICE_ERROR)
+		return grub_error (GRUB_ERR_BAD_DEVICE,
+				   N_("device error: could not set requested"
+				      " mode"));
+	      else if (status == GRUB_EFI_UNSUPPORTED)
+		return grub_error (GRUB_ERR_OUT_OF_RANGE,
+				   N_("invalid mode: number not valid"));
+	      else
+		return grub_error (GRUB_ERR_BAD_OS,
+				   N_("unexpected EFI error number: `%u'"),
+				   (unsigned) status);
+	    }
+	}
+      else
+	return grub_error (GRUB_ERR_BAD_ARGUMENT,
+			   N_("invalid mode: `%lu' is greater than maximum"
+			      " mode `%lu'"),
+			   mode, (unsigned long) o->mode->max_mode);
+    }
+
+  if (argc == 0)
+    {
+      grub_printf_ (N_("Available modes for console output device.\n"));
+
+      for (i=0; i < o->mode->max_mode; i++)
+	if (GRUB_EFI_SUCCESS == efi_call_4 (o->query_mode, o, i,
+					    &columns, &rows))
+	  grub_printf_ (N_(" [%lu]  Col %5u Row %5u %c\n"),
+			(unsigned long) i, (unsigned) columns, (unsigned) rows,
+			(i == o->mode->mode) ? '*' : ' ');
+    }
+
+  return GRUB_ERR_NONE;
+}
+
+static grub_command_t cmd;
+
+GRUB_MOD_INIT(cmp)
+{
+  cmd = grub_register_command ("efitextmode", grub_cmd_efitextmode,
+			       N_("[min|max|mode_num]"), N_("Get or set EFI text mode."));
+}
+
+GRUB_MOD_FINI(cmp)
+{
+  grub_unregister_command (cmd);
+}
#4 lore raw

Re: [PATCH 1/2] efi: Add efitextmode command for getting/setting the text mode resolution

Dear Glenn,

Am 12.05.22 um 20:29 schrieb Glenn Washburn:

Quoted 9 lines · On Thu, 12 May 2022 08:10:56 +0200 Paul Menzel wrote:
Quoted 8 lines

Am 12.05.22 um 05:07 schrieb Glenn Washburn:

Quoted 5 lines

This command is meant to behave similarly to the 'mode' command of the EFI Shell application. One difference is that to set the mode the mode number is given, not the rows and columns of the desired mode. Also supported are the arguments "min" and "max", which set the mode to the minimum and maximum mode respectively as calculated by the columns * rows of that mode.

Quoted 6 lines
Quoted 1 line

Did you test this also with QEMU and OVMF?

Yes, although with QEMU with -nographic and the output going through serial, though not using GRUB's serial terminal. So its still using the efi console. Is there a reason you're asking? Something not working as expected?

No, I haven’t tested the patch. I just wanted to know, how the patch was tested besides the HP device.

[…]

Kind regards,

Paul

#7 lore raw

Re: [PATCH 2/2] docs: Add documentation for the efitextmode command

In reply to Paul Menzel
Quoted 50 lines · On Thu, 12 May 2022 08:08:32 +0200 Paul Menzel <[email protected]> wrote:

Dear Glenn,

Thank you for the patch. Two small nits.

Am 12.05.22 um 05:07 schrieb Glenn Washburn:

Quoted 1 line

*Add documentation for …* could be abbreviated to *Document …* in the git commit message summary.

Quoted 26 lines
---
  docs/grub.texi | 23 +++++++++++++++++++++++
  1 file changed, 23 insertions(+)
docs/grub.texi +7 -0
index 3b5522b0a..50ef28edd 100644
@@ -4202,6 +4202,7 @@ you forget a command, you can run the command @command{help}
 * distrust::                    Remove a pubkey from trusted keys
 * drivemap::                    Map a drive to another
 * echo::                        Display a line of text
+* efitextmode::                 Set/Get text output mode resolution
 * eval::                        Evaluate agruments as GRUB commands
 * export::                      Export an environment variable
 * false::                       Do nothing, unsuccessfully
@@ -4638,6 +4639,28 @@ character will print that character.
  @end deffn
 
 
+@node efitextmode
+@subsection efitextmode
+
+@deffn Command efitextmode [min | max | mode_num]
+When used with no arguments displays all available text output modes. The
+set mode determines the columns and rows of the text display when in

docs/grub.texi character will print that character. · line 4657

Quoted 10 lines
docs/grub.texi +10 -0
+text mode. An asterisk, @samp{*}, will be at the end of the line of the
+currently set mode.
+
+Otherwise the command only takes a single parameter, which can be
+@samp{min}, @samp{max}, or a mode number given by the listing when run
+with no arguments. These arguments set the mode to the minimum, maximum,
+and particular mode respectively.
+
+By default GRUB will start in whatever mode the EFI firmware defaults to.
+There are firmwares known to setup the default mode such that output

The verb *set up* is spelled with a space.

Quoted 4 lines

docs/grub.texi character will print that character. · line 4658

Quoted 1 line
docs/grub.texi +1 -0
+behaves strangely. Setting the mode can fix this.

Should your device be mentioned in the documentation, and one of the strangeness be described?

I deliberately was vague here because I don't think the specifics matter. The point I wanted to get across is that if your text mode EFI console is behaving strangely (define it how ever you want), that a mode switch may fix things. This is not to presume that other strangeness can't be fixed by doing a mode switch. Perhaps I could add after "strangely", ", for example your cursor in the grub shell never reaches the bottom of the screen or when typing input characters from previous command output are overwritten". I don't think my device need be mentioned.

Glenn

Quoted 12 lines

docs/grub.texi character will print that character. · line 4665

Quoted 7 lines
docs/grub.texi +5 -0
+
+Note: This command is only available on EFI platforms.
+@end deffn
+
+
  @node eval
  @subsection eval

Kind regards,

Paul

Reviewed-by Tested-by on the v1 series
#9 lore raw
In reply to Glenn Washburn
Quoted 7 lines · Glenn Washburn

This patch add the efitextmode command which is used for showing all available text output modes and setting a specific mode. Its basically the equivalent of the EFI Shell's "mode" command and its output looks similar. The main difference is that its shows the mode number in the listing and takes a mode number when setting the mode. As a convenience it can take arguments "min" or "max" to set to the minimum or maximum mode.

Quoted 6 lines

Glenn

Glenn Washburn (2):
efi: Add efitextmode command for getting/setting the text mode
resolution
docs: Add documentation for the efitextmode command

Looks sane to me, works fine on OVMF.

take care,
Gerd

#8 lore raw

Re: [PATCH 2/2] docs: Add documentation for the efitextmode command

In reply to Glenn Washburn

Dear Glenn,

Am 13.05.22 um 00:46 schrieb Glenn Washburn:

Quoted 1 line · On Thu, 12 May 2022 08:08:32 +0200 Paul Menzel wrote:

[…]

Quoted 50 lines
Quoted 45 lines

Am 12.05.22 um 05:07 schrieb Glenn Washburn:

Quoted 1 line

*Add documentation for …* could be abbreviated to *Document …* in the git commit message summary.

Quoted 26 lines
---
   docs/grub.texi | 23 +++++++++++++++++++++++
   1 file changed, 23 insertions(+)
docs/grub.texi +7 -0
index 3b5522b0a..50ef28edd 100644
@@ -4202,6 +4202,7 @@ you forget a command, you can run the command @command{help}
  * distrust::                    Remove a pubkey from trusted keys
  * drivemap::                    Map a drive to another
  * echo::                        Display a line of text
+* efitextmode::                 Set/Get text output mode resolution
  * eval::                        Evaluate agruments as GRUB commands
  * export::                      Export an environment variable
  * false::                       Do nothing, unsuccessfully
@@ -4638,6 +4639,28 @@ character will print that character.
   @end deffn
 
 
+@node efitextmode
+@subsection efitextmode
+
+@deffn Command efitextmode [min | max | mode_num]
+When used with no arguments displays all available text output modes. The
+set mode determines the columns and rows of the text display when in

docs/grub.texi character will print that character. · line 4657

Quoted 10 lines
docs/grub.texi +10 -0
+text mode. An asterisk, @samp{*}, will be at the end of the line of the
+currently set mode.
+
+Otherwise the command only takes a single parameter, which can be
+@samp{min}, @samp{max}, or a mode number given by the listing when run
+with no arguments. These arguments set the mode to the minimum, maximum,
+and particular mode respectively.
+
+By default GRUB will start in whatever mode the EFI firmware defaults to.
+There are firmwares known to setup the default mode such that output

The verb *set up* is spelled with a space.

Quoted 4 lines

docs/grub.texi character will print that character. · line 4658

Quoted 1 line
docs/grub.texi +1 -0
+behaves strangely. Setting the mode can fix this.

Should your device be mentioned in the documentation, and one of the strangeness be described?

Quoted 9 lines

I deliberately was vague here because I don't think the specifics matter. The point I wanted to get across is that if your text mode EFI console is behaving strangely (define it how ever you want), that a mode switch may fix things. This is not to presume that other strangeness can't be fixed by doing a mode switch. Perhaps I could add after "strangely", ", for example your cursor in the grub shell never reaches the bottom of the screen or when typing input characters from previous command output are overwritten". I don't think my device need be mentioned.

Yes, I like your suggestion.

[…]

Kind regards,

Paul