ixgbe: make link update thread periodic

index aa843bd5c4a5..712062306491 100644
@@ -4154,8 +4154,8 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 			break;
 		case ixgbe_mac_X550EM_x:
 		case ixgbe_mac_X550EM_a:
-			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
-					IXGBE_ESDP_SDP0;
+			sfp_cage_full = !(IXGBE_READ_REG(hw, IXGBE_ESDP) &
+					  IXGBE_ESDP_SDP0);
 			break;
 		default:
 			/* sanity check - No SFP+ devices here */

354 lines not on this page · raw message

index 81b15ad28212..f1694ef76b14 100644
@@ -4131,48 +4131,89 @@ ixgbevf_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	return ret_val;
 }
 
-static void *
-ixgbe_dev_setup_link_thread_handler(void *param)
+static void
+ixgbe_link_service(struct rte_eth_dev *dev)
 {
-	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	struct ixgbe_interrupt *intr =
 		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
-	u32 speed, start, ticks, service_ms;
+	bool link_up, autoneg = false, have_int = false;
+	u32 speed;
 	s32 err;
-	bool link_up, autoneg = false;
 
-	pthread_detach(pthread_self());
+	/* Test if we have a LSC interrupt for this platform, if not we need to
+	 * manually check the link register since IXGBE_FLAG_NEED_LINK_CONFIG
+	 * will never be set in the interrupt handler
+	 */
+#ifndef RTE_EXEC_ENV_FREEBSD
+	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+	struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
+	if (rte_intr_allow_others(intr_handle)) {
+		/* check if LSC interrupt is enabled */
+		if (dev->data->dev_conf.intr_conf.lsc)
+			have_int = true;
+	}
+#endif /* #ifdef RTE_EXEC_ENV_FREEBSD */
 
-	while (1) {
-		service_ms = 100;
-		if (intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG) {
-			speed = hw->phy.autoneg_advertised;
+	/* Skip if we still need to setup an SFP, or if no link config requested
+	 */
+	if ((intr->flags & IXGBE_FLAG_NEED_SFP_SETUP) ||
+	    (!(intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG) && have_int))
+		return;
+
+	if (!have_int && !(intr->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) {
+		err = ixgbe_check_link(hw, &speed, &link_up, 0);
+		if (!err && !link_up) {
+			intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+			PMD_DRV_LOG(DEBUG, "Link down, no LSC, set NEED_LINK_CONFIG\n");
+		} else {
+			return;
+		}
+	}
+
+	speed = hw->phy.autoneg_advertised;
+	if (!speed)
+		ixgbe_get_link_capabilities(hw, &speed, &autoneg);
 
-			if (!speed)
-				ixgbe_get_link_capabilities(hw, &speed, &autoneg);
+	err = ixgbe_setup_link(hw, speed, true);
+	if (err) {
+		PMD_DRV_LOG(ERR, "ixgbe_setup_link failed %d\n", err);
+		return;
+	}
 
-			err = ixgbe_setup_link(hw, speed, true);
+	intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+}
 
-			if (err == IXGBE_SUCCESS)
-				err = ixgbe_check_link(hw, &speed, &link_up, 0);
+static void *
+ixgbe_dev_setup_link_thread_handler(void *param)
+{
+	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	u32 speed, start, ticks, service_ms;
+	s32 err;
+	bool link_up  = false;
 
-			/* Run the service thread handler more frequently when link is
-			 * down to reduce link up latency (every 200ms vs 1s)
-			 *
-			 * Use a number of smaller sleeps to decrease exit latency when
-			 * ixgbe_dev_stop() wants this thread to join
-			 */
-			if (err == IXGBE_SUCCESS && link_up) {
-				service_ms = 2000;
-				intr->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
-			}
+	pthread_detach(pthread_self());
 
-			if (!ixgbe_dev_link_update(dev, 0)) {
-				ixgbe_dev_link_status_print(dev);
-				rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
-			}
+	while (1) {
+		ixgbe_link_service(dev);
+
+		if (!ixgbe_dev_link_update(dev, 0)) {
+			ixgbe_dev_link_status_print(dev);
+			rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL);
 		}
+		/* Run the service thread handler more frequently when link is
+		 * down to reduce link up latency (every 200ms vs 1s)
+		 *
+		 * Use a number of smaller sleeps to decrease exit latency when
+		 * ixgbe_dev_stop() wants this thread to join
+		 */
+
+		err = ixgbe_check_link(hw, &speed, &link_up, 0);
+		if (err == IXGBE_SUCCESS && link_up)
+			service_ms = 2000;
+		else
+			service_ms = 100;
 
 		/* Call msec_delay in a loop with several smaller sleeps to
 		 * provide periodic thread cancellation points

index 69e0e82a5b1a..4f17fabf4073 100644
@@ -29,6 +29,7 @@
 #define IXGBE_FLAG_PHY_INTERRUPT    (uint32_t)(1 << 2)
 #define IXGBE_FLAG_MACSEC           (uint32_t)(1 << 3)
 #define IXGBE_FLAG_NEED_LINK_CONFIG (uint32_t)(1 << 4)
+#define IXGBE_FLAG_NEED_SFP_SETUP   ((uint32_t)(1 << 5))
 
 /*
  * Defines that were not part of ixgbe_type.h as they are not used by the

index f1694ef76b14..e1d66fecd8d5 100644
@@ -135,6 +135,8 @@ static const char * const ixgbevf_valid_arguments[] = {
 	NULL
 };
 
+static s32 eth_ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+					    bool *link_up, bool link_up_wait_to_complete);
 static int eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params);
 static int eth_ixgbe_dev_uninit(struct rte_eth_dev *eth_dev);
 static int ixgbe_fdir_filter_init(struct rte_eth_dev *eth_dev);

@@ -764,6 +766,33 @@ static const struct rte_ixgbe_xstats_name_off rte_ixgbevf_stats_strings[] = {
 #define IXGBEVF_NB_XSTATS (sizeof(rte_ixgbevf_stats_strings) /	\
 		sizeof(rte_ixgbevf_stats_strings[0]))
 
+/**
+ * This function is the same as ixgbe_need_crosstalk_fix() in base/ixgbe_common.c
+ *
+ * ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
+ * @hw: pointer to hardware structure
+ *
+ * Contains the logic to identify if we need to verify link for the
+ * crosstalk fix
+ **/
+static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
+{
+	/* Does FW say we need the fix */
+	if (!hw->need_crosstalk_fix)
+		return false;
+
+	/* Only consider SFP+ PHYs i.e. media type fiber */
+	switch (ixgbe_get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+	case ixgbe_media_type_fiber_qsfp:
+		break;
+	default:
+	return false;
+}
+
+return true;
+}
+
 /*
  * This function is the same as ixgbe_is_sfp() in base/ixgbe.h.
  */

@@ -1051,6 +1080,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 		IXGBE_DEV_PRIVATE_TO_FILTER_INFO(eth_dev->data->dev_private);
 	struct ixgbe_bw_conf *bw_conf =
 		IXGBE_DEV_PRIVATE_TO_BW_CONF(eth_dev->data->dev_private);
+	struct ixgbe_mac_info *mac = &hw->mac;
 	uint32_t ctrl_ext;
 	uint16_t csum;
 	int diag, i, ret;

@@ -1123,6 +1153,18 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
 	/* pick up the PCI bus settings for reporting later */
 	ixgbe_get_bus_info(hw);
 
+	/* override mac_link_check to check for sfp cage full/empty */
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+	case ixgbe_mac_82599EB:
+		mac->ops.check_link = eth_ixgbe_check_mac_link_generic;
+		break;
+	default:
+		break;
+	}
+
+
 	/* Unlock any pending hardware semaphore */
 	ixgbe_swfw_lock_reset(hw);
 

@@ -2386,6 +2428,8 @@ ixgbe_dev_configure(struct rte_eth_dev *dev)
 	struct ixgbe_interrupt *intr =
 		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
 	struct ixgbe_adapter *adapter = dev->data->dev_private;
+	struct ixgbe_hw *hw =
+		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	int ret;
 
 	PMD_INIT_FUNC_TRACE();

@@ -2404,6 +2448,10 @@ ixgbe_dev_configure(struct rte_eth_dev *dev)
 	/* set flag to update link status after init */
 	intr->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
 
+	/* set flag to setup SFP after init */
+	if (ixgbe_is_sfp(hw))
+		intr->flags |= IXGBE_FLAG_NEED_SFP_SETUP;
+
 	/*
 	 * Initialize to TRUE. If any of Rx queues doesn't meet the bulk
 	 * allocation or vector Rx preconditions we will reset it.

@@ -2423,13 +2471,24 @@ ixgbe_dev_phy_intr_setup(struct rte_eth_dev *dev)
 		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
 	uint32_t gpie;
 
-	/* only set up it on X550EM_X */
+	/* only set up it on X550EM_X (external PHY interrupt)
+	 * or on X550EM_a_* for SFP_PRSNT# de-assertion (SFP removal)
+	 */
 	if (hw->mac.type == ixgbe_mac_X550EM_x) {
 		gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
 		gpie |= IXGBE_SDP0_GPIEN_X550EM_x;
 		IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
 		if (hw->phy.type == ixgbe_phy_x550em_ext_t)
 			intr->mask |= IXGBE_EICR_GPI_SDP0_X550EM_x;
+	} else if (hw->mac.type == ixgbe_mac_X550EM_a) {
+		gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+		gpie |= IXGBE_SDP0_GPIEN_X550EM_a;
+		IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+		intr->mask |= IXGBE_EICR_GPI_SDP0_X550EM_a;
+	} else {
+		PMD_DRV_LOG(DEBUG,
+			    "No PHY/SFP interrupt for MAC %d, PHY %d\n",
+			    hw->mac.type, hw->phy.type);
 	}
 }
 

@@ -2692,9 +2751,9 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
 		}
 	}
 
-	if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) {
+	if (ixgbe_is_sfp(hw)) {
 		err = hw->mac.ops.setup_sfp(hw);
-		intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+		intr->flags |= IXGBE_FLAG_NEED_SFP_SETUP;
 		err = rte_ctrl_thread_create(&ad->link_thread_tid,
 					     "ixgbe-service-tid",
 					     NULL,

@@ -4131,6 +4190,181 @@ ixgbevf_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	return ret_val;
 }
 
+/**
+ * ixgbe_check_sfp_cage - Find present status of SFP module
+ * @hw: pointer to hardware structure
+ *
+ * Find if a SFP module is present and if this device supports SFPs
+ **/
+enum ixgbe_sfp_cage_status ixgbe_check_sfp_cage(struct ixgbe_hw *hw)
+{
+	enum ixgbe_sfp_cage_status sfp_cage_status;
+
+	/* If we're not a fiber/fiber_qsfp, no cage to check */
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+	case ixgbe_media_type_fiber_qsfp:
+		break;
+	default:
+		return IXGBE_SFP_CAGE_NOCAGE;
+	}
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+		sfp_cage_status = !!(IXGBE_READ_REG(hw, IXGBE_ESDP) &
+			     IXGBE_ESDP_SDP2);
+		break;
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		/* SDP0 is the active low signal PRSNT#, so invert this */
+		sfp_cage_status = !(IXGBE_READ_REG(hw, IXGBE_ESDP) &
+				  IXGBE_ESDP_SDP0);
+		break;
+	default:
+		/* Don't know how to check this device type yet */
+		sfp_cage_status = IXGBE_SFP_CAGE_UNKNOWN;
+		DEBUGOUT("IXGBE_SFP_CAGE_UNKNOWN, unknown mac type %d\n",
+			 hw->mac.type);
+		break;
+	}
+
+	DEBUGOUT("sfp status %d for mac type %d\n", sfp_cage_status, hw->mac.type);
+	return sfp_cage_status;
+}
+
+static s32
+ixgbe_sfp_id_and_setup(struct rte_eth_dev *dev)
+{
+	struct ixgbe_hw *hw =
+		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	enum ixgbe_sfp_cage_status sfp_cage_status;
+	s32 err;
+
+	/* Can't ID or setup SFP if it's not plugged in */
+	sfp_cage_status = ixgbe_check_sfp_cage(hw);
+	if (sfp_cage_status == IXGBE_SFP_CAGE_EMPTY ||
+	    sfp_cage_status == IXGBE_SFP_CAGE_NOCAGE)
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+
+	/* Something's in the cage, ID it */
+	hw->phy.ops.identify_sfp(hw);
+
+	/* Unknown module type, give up */
+	if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
+		PMD_DRV_LOG(ERR, "unknown SFP type, giving up");
+		return IXGBE_ERR_SFP_NOT_SUPPORTED;
+	}
+
+	/* This should be a redundant check, since we looked at the
+	 * PRSNT# signal from the cage above, but just in case this is
+	 * an SFP that's slow to respond to I2C pokes correctly, try it
+	 * again later
+	 */
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) {
+		PMD_DRV_LOG(ERR, "IDed SFP as absent but cage PRSNT# active!?");
+		return IXGBE_ERR_SFP_NOT_PRESENT;
+	}
+
+	/* SFP is present and identified, try to set it up */
+	err = hw->mac.ops.setup_sfp(hw);
+	if (err)
+		PMD_DRV_LOG(ERR, "setup_sfp() failed %d", err);
+
+	return err;
+}
+
+static void
+ixgbe_sfp_service(struct rte_eth_dev *dev)
+{
+	struct ixgbe_hw *hw =
+		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_interrupt *intr =
+		IXGBE_DEV_PRIVATE_TO_INTR(dev->data->dev_private);
+	enum ixgbe_sfp_cage_status sfp_cage_status;
+	s32 err;
+	u8 sff_id;
+	bool have_int = false;
+
+	/* If there's no module cage, then there's nothing to service */
+	sfp_cage_status = ixgbe_check_sfp_cage(hw);
+	if (sfp_cage_status == IXGBE_SFP_CAGE_NOCAGE) {
+		PMD_DRV_LOG(DEBUG, "No SFP to service\n");
+		return;
+	}
+
+	/* Even for platforms where ixgbe_check_sfp_cage() gives a clear
+	 * status result, if there's no interrupts, or no interrupt for the SFP
+	 * cage present pin, even if other interrupts exist, then we still need
+	 * to poll here to set the flag.
+	 */
+#ifndef RTE_EXEC_ENV_FREEBSD
+	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+	struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
+	if (rte_intr_allow_others(intr_handle)) {
+		/* check if lsc interrupt is enabled */
+		if (dev->data->dev_conf.intr_conf.lsc)
+			have_int = true;
+	}
+#endif /* #ifdef RTE_EXEC_ENV_FREEBSD */
+
+	if (!have_int && sfp_cage_status == IXGBE_SFP_CAGE_EMPTY) {
+		intr->flags |= IXGBE_FLAG_NEED_SFP_SETUP;
+		PMD_DRV_LOG(DEBUG, "No SFP, no LSC, set NEED_SFP_SETUP\n");
+	}
+
+	/* For platforms that don't have a way to read the PRESENT# signal from
+	 * the SFP cage, fallback to doing an I2C read and seeing if it's ACKed
+	 * to determine if a module is present
+	 */
+	if (sfp_cage_status == IXGBE_SFP_CAGE_UNKNOWN) {
+		PMD_DRV_LOG(DEBUG,
+			    "SFP present unknown (int? %d), try I2C read\n",
+			    have_int);
+
+		/* Rather than calling identify_sfp, which will read a lot of I2C
+		 * registers (and in a slow processor intensive fashion due to
+		 * bit-banging, just read the SFF ID register, which is at a
+		 * common address across SFP/SFP+/QSFP modules and see if
+		 * there's a NACK.  This works since we only expect a NACK if no
+		 * module is present
+		 */
+		err = ixgbe_read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER, &sff_id);
+		if (err != IXGBE_SUCCESS) {
+			PMD_DRV_LOG(DEBUG, "Received I2C NAK from SFP, set NEED_SFP_SETUP flag\n");
+			intr->flags |= IXGBE_FLAG_NEED_SFP_SETUP;
+			sfp_cage_status = IXGBE_SFP_CAGE_EMPTY;
+		} else {
+			PMD_DRV_LOG(DEBUG, "SFP ID read ACKed");
+			sfp_cage_status = IXGBE_SFP_CAGE_FULL;
+		}
+	}
+
+	if (sfp_cage_status == IXGBE_SFP_CAGE_EMPTY) {
+		PMD_DRV_LOG(DEBUG, "SFP absent, cage_status %d\n", sfp_cage_status);
+		return;
+	}
+
+	/* No setup requested?	Nothing to do */
+	if (!(intr->flags & IXGBE_FLAG_NEED_SFP_SETUP))
+		return;
+
+	err = ixgbe_sfp_id_and_setup(dev);
+	if (err) {
+		PMD_DRV_LOG(DEBUG, "failed to ID & setup SFP %d", err);
+		return;
+	}
+
+	/* Setup is done, clear the flag, but make sure link config runs for new SFP */
+	intr->flags &= ~IXGBE_FLAG_NEED_SFP_SETUP;
+	intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+
+	/*
+	 * Since this is a new SFP, clear the old advertised speed mask so we don't
+	 * end up using an old slower rate
+	 */
+	hw->phy.autoneg_advertised = 0;
+}
+
 static void
 ixgbe_link_service(struct rte_eth_dev *dev)
 {

@@ -4189,13 +4423,13 @@ ixgbe_dev_setup_link_thread_handler(void *param)
 {
 	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	u32 speed, start, ticks, service_ms;
+	uint64_t start, ticks, service_ms;
+	uint32_t speed;
 	s32 err;
 	bool link_up  = false;
 
-	pthread_detach(pthread_self());
-
 	while (1) {
+		ixgbe_sfp_service(dev);
 		ixgbe_link_service(dev);
 
 		if (!ixgbe_dev_link_update(dev, 0)) {

@@ -4227,6 +4461,25 @@ ixgbe_dev_setup_link_thread_handler(void *param)
 	return NULL;
 }
 
+static s32
+eth_ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				 bool *link_up, bool link_up_wait_to_complete)
+{
+	if (ixgbe_need_crosstalk_fix(hw)) {
+		enum ixgbe_sfp_cage_status sfp_cage_status;
+
+		sfp_cage_status = ixgbe_check_sfp_cage(hw);
+		if (sfp_cage_status != IXGBE_SFP_CAGE_FULL) {
+			*link_up = false;
+			*speed = IXGBE_LINK_SPEED_UNKNOWN;
+			return IXGBE_SUCCESS;
+		}
+	}
+
+	return ixgbe_check_mac_link_generic(hw, speed, link_up, link_up_wait_to_complete);
+}
+
+
 /*
  * In freebsd environment, nic_uio drivers do not support interrupts,
  * rte_intr_callback_register() will fail to register interrupts.

@@ -4513,8 +4766,6 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
 	eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
 	PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
 
-	intr->flags = 0;
-
 	/* set flag for async link update */
 	if (eicr & IXGBE_EICR_LSC)
 		intr->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;

@@ -4530,6 +4781,11 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
 	    (eicr & IXGBE_EICR_GPI_SDP0_X550EM_x))
 		intr->flags |= IXGBE_FLAG_PHY_INTERRUPT;
 
+	/* Check for loss of SFP */
+	if (hw->mac.type ==  ixgbe_mac_X550EM_a &&
+	    (eicr & IXGBE_EICR_GPI_SDP0_X550EM_a))
+		intr->flags |= IXGBE_FLAG_NEED_SFP_SETUP;
+
 	return 0;
 }
 

index 4f17fabf4073..89582bc5b3a9 100644
@@ -517,6 +517,14 @@ struct ixgbe_vf_representor {
 	struct rte_eth_dev *pf_ethdev;
 };
 
+enum ixgbe_sfp_cage_status {
+	IXGBE_SFP_CAGE_EMPTY = 0,
+	IXGBE_SFP_CAGE_FULL,
+	IXGBE_SFP_CAGE_UNKNOWN = -1,
+	IXGBE_SFP_CAGE_NOCAGE = -2,
+};
+enum ixgbe_sfp_cage_status ixgbe_check_sfp_cage(struct ixgbe_hw *hw);
+
 int ixgbe_vf_representor_init(struct rte_eth_dev *ethdev, void *init_params);
 int ixgbe_vf_representor_uninit(struct rte_eth_dev *ethdev);