xen/pt: fix syntax error that causes FTBFS in some configurations
v3 cover xen/pt: fix FTBFS and reserve PCI slot 2 for the Intel IGD
In reply to a message not in the archiveThis is a series of two patches:
The first fixes FTBFS when --enable-xen and --disable-xen-pci-passthrough configure options are set with when building for the linux target os.
The second fixes a regression that was introduced many years ago with the upgrade from the Qemu traditional device model that is still available from xenbits.xen.org and based on very old Qemu version 0.10.2.
The regression is that the Qemu traditional device model reserves slot 2 for the Intel IGD on the PCI bus when the Intel IGD is passed through to a Xen HVM domain, but the current Qemu upsream device model does not and in fact results in a different slot assigned to the Intel IGD.
This behavior does not conform to the requirement that the Intel IGD must be assigned to slot 2, as noted in docs/igd-assign.txt in the Qemu source
code: "IGD must be given address 02.0 on the PCI root bus in the VM."
I have used the second patch of the series for the past two years with no problems. Without the patch, the reliability of PCI passthrough of the Intel IGD to a Xen HVM guest is very poor, and in some cases the guest fails to start without the patch.
v2: Remove From: <email address> tag at top of message
v3: No change to this cover letter since v2
Chuck Zmudzinski (2):
xen/pt: fix syntax error that causes FTBFS in some configurations xen/pt: reserve PCI slot 2 for Intel igd-passthru
hw/i386/pc_piix.c | 3 +++ hw/xen/meson.build | 2 +- hw/xen/xen_pt.c | 25 +++++++++++++++++++++++++ hw/xen/xen_pt.h | 16 ++++++++++++++++ hw/xen/xen_pt_stub.c | 4 ++++ 5 files changed, 49 insertions(+), 1 deletion(-)
Signature · 1 line
2.37.2
PATCH v3 1/2 xen/pt: fix syntax error that causes FTBFS in some configurations
When Qemu is built with --enable-xen and --disable-xen-pci-passthrough and the target os is linux, the build fails with:
meson.build:3477:2: ERROR: File xen_pt_stub.c does not exist.
---
v2: Remove From: <email address> tag at top of commit message
v3: No change to this patch since v2
hw/xen/meson.build | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/xen/meson.build +1 -1
@@ -18,7 +18,7 @@ if have_xen_pci_passthrough 'xen_pt_msi.c', )) else - xen_specific_ss.add('xen_pt_stub.c') + xen_specific_ss.add(files('xen_pt_stub.c')) endif specific_ss.add_all(when: ['CONFIG_XEN', xen], if_true: xen_specific_ss)
Signature · 1 line
2.37.2
PATCH v3 2/2 xen/pt: reserve PCI slot 2 for Intel igd-passthru
In reply to Chuck ZmudzinskiIntel specifies that the Intel IGD must occupy slot 2 on the PCI bus, as noted in docs/igd-assign.txt in the Qemu source code.
Currently, when the xl toolstack is used to configure a Xen HVM guest with Intel IGD passthrough to the guest with the Qemu upstream device model, a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy a different slot. This problem often prevents the guest from booting.
The only available workaround is not good: Configure Xen HVM guests to use the old and no longer maintained Qemu traditional device model available from xenbits.xen.org which does reserve slot 2 for the Intel IGD.
To implement this feature in the Qemu upstream device model for Xen HVM guests, introduce the following new class, functions, types, and macros:
* XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE
* XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS
* typedef XenPTQdevRealize function pointer
* XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2
* xen_igd_reserve_slot and xen_igd_clear_slot functions
The new xen_igd_reserve_slot function uses the existing slot_reserved_mask member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using the xl toolstack with the gfx_passthru option enabled, which sets the igd-passthru=on option to Qemu for the Xen HVM machine type.
The new xen_igd_reserve_slot function also needs to be implemented in hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, in which case it does nothing.
The new xen_igd_clear_slot function overrides qdev->realize of the parent PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was created in hw/i386/pc_piix.c for the case when igd-passthru=on.
---
Notes that might be helpful to reviewers of patched code in hw/xen:
The new functions and types are based on recommendations from Qemu docs:
https://qemu.readthedocs.io/en/latest/devel/qom.html
Notes that might be helpful to reviewers of patched code in hw/i386:
The small patch to hw/i386/pc_piix.c is protected by CONFIG_XEN so it does not affect builds that do not have CONFIG_XEN defined.
xen_igd_gfx_pt_enabled() in the patched hw/i386/pc_piix.c file is an existing function that is only true when Qemu is built with xen-pci-passthrough enabled and the administrator has configured the Xen HVM guest with Qemu's igd-passthru=on option.
v2: Remove From: <email address> tag at top of commit message
v3: Changed the test for the Intel IGD in xen_igd_clear_slot:
if (is_igd_vga_passthrough(&s->real_device) &&
(s->real_device.vendor_id == PCI_VENDOR_ID_INTEL)) {
is changed to
if (xen_igd_gfx_pt_enabled() && (s->hostaddr.slot == 2)
&& (s->hostaddr.function == 0)) {
I hoped that I could use the test in v2, since it matches the other tests for the Intel IGD in Qemu and Xen, but those tests do not work because the necessary data structures are not set with their values yet. So instead use the test that the administrator has enabled gfx_passthru and the device address on the host is 02.0. This test does detect the Intel IGD correctly.
Sorry for the extra noise.
hw/i386/pc_piix.c | 3 +++ hw/xen/xen_pt.c | 25 +++++++++++++++++++++++++ hw/xen/xen_pt.h | 16 ++++++++++++++++ hw/xen/xen_pt_stub.c | 4 ++++ 4 files changed, 48 insertions(+)
hw/i386/pc_piix.c +3 -0
@@ -402,6 +402,9 @@ static void pc_xen_hvm_init(MachineState *machine) }pc_xen_hvm_init_pci (machine); +if (xen_igd_gfx_pt_enabled ()) { +xen_igd_reserve_slot (pcms->bus); + }pci_create_simple (pcms->bus,-1 ,"xen-platform" ); }#endif
hw/xen/xen_pt.c +25 -0
@@ -950,11 +950,35 @@ static void xen_pci_passthrough_instance_init(Object *obj)PCI_DEVICE (obj)->cap_present |=QEMU_PCI_CAP_EXPRESS ; } +void xen_igd_reserve_slot (PCIBus *pci_bus) +{ +XEN_PT_LOG (0 ,"Reserving PCI slot 2 for IGD\n" ); + pci_bus->slot_reserved_mask |=XEN_PCI_IGD_SLOT_MASK ; +} + +static void xen_igd_clear_slot (DeviceState *qdev,Error **errp) +{ +PCIDevice *pci_dev = (PCIDevice *)qdev; +XenPCIPassthroughState *s =XEN_PT_DEVICE (pci_dev); +XenPTDeviceClass *xptc =XEN_PT_DEVICE_GET_CLASS (s); +PCIBus *pci_bus =pci_get_bus (pci_dev); + +if (xen_igd_gfx_pt_enabled () && (s->hostaddr.slot ==2 ) + && (s->hostaddr.function ==0 )) { + pci_bus->slot_reserved_mask &= ~XEN_PCI_IGD_SLOT_MASK ; +XEN_PT_LOG (pci_dev,"Intel IGD found, using slot 2\n" ); + } + xptc->pci_qdev_realize (qdev, errp); +} +static void xen_pci_passthrough_class_init (ObjectClass *klass,void *data) {DeviceClass *dc =DEVICE_CLASS (klass);PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +XenPTDeviceClass *xptc =XEN_PT_DEVICE_CLASS (klass); + xptc->pci_qdev_realize = dc->realize; + dc->realize = xen_igd_clear_slot; k->realize = xen_pt_realize; k->exit = xen_pt_unregister_device; k->config_read = xen_pt_pci_read_config;
@@ -977,6 +1001,7 @@ static const TypeInfo xen_pci_passthrough_info = { .instance_size = sizeof(XenPCIPassthroughState), .instance_finalize = xen_pci_passthrough_finalize, .class_init = xen_pci_passthrough_class_init, + .class_size = sizeof(XenPTDeviceClass), .instance_init = xen_pci_passthrough_instance_init, .interfaces = (InterfaceInfo []) { {INTERFACE_CONVENTIONAL_PCI_DEVICE },
hw/xen/xen_pt.h +16 -0
@@ -3,6 +3,7 @@#include "hw/xen/xen_common.h" #include "hw/pci/pci.h" +#include "hw/pci/pci_bus.h" #include "xen-host-pci-device.h" #include "qom/object.h"
@@ -41,7 +42,20 @@ typedef struct XenPTReg XenPTReg;#define TYPE_XEN_PT_DEVICE "xen-pci-passthrough" OBJECT_DECLARE_SIMPLE_TYPE(XenPCIPassthroughState, XEN_PT_DEVICE) +#define XEN_PT_DEVICE_CLASS (klass) \ + OBJECT_CLASS_CHECK(XenPTDeviceClass, klass, TYPE_XEN_PT_DEVICE) +#define XEN_PT_DEVICE_GET_CLASS (obj) \ + OBJECT_GET_CLASS(XenPTDeviceClass, obj, TYPE_XEN_PT_DEVICE) + +typedef void (*XenPTQdevRealize )(DeviceState *qdev,Error **errp); + +typedef struct XenPTDeviceClass { +PCIDeviceClass parent_class; +XenPTQdevRealize pci_qdev_realize; +}XenPTDeviceClass ; +uint32_t igd_read_opregion (XenPCIPassthroughState *s); +void xen_igd_reserve_slot (PCIBus *pci_bus);void igd_write_opregion (XenPCIPassthroughState *s,uint32_t val);void xen_igd_passthrough_isa_bridge_create (XenPCIPassthroughState *s,XenHostPCIDevice *dev);
@@ -76,6 +90,8 @@ typedef int (*xen_pt_conf_byte_read)#define XEN_PCI_INTEL_OPREGION 0xfc +#define XEN_PCI_IGD_SLOT_MASK 0x4UL/* Intel IGD slot_reserved_mask */ + typedef enum { XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */ XEN_PT_GRP_TYPE_EMU, /* emul reg group */
hw/xen/xen_pt_stub.c +4 -0
@@ -20,3 +20,7 @@ void xen_igd_gfx_pt_set(bool value, Error **errp)error_setg (errp,"Xen PCI passthrough support not built in" ); } } + +void xen_igd_reserve_slot (PCIBus *pci_bus) +{ +}
Signature · 1 line
2.37.2