Skip to contentSkip to conversation

add support for PLCA RS

PATCH Superseded Piergiorgio Beruto 1 participant 3 messages Dec 10, 2022

Subsystems (3)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover add support for PLCA RS

This patch adds support for the IEEE802.3cg-2019 Clause 148 PLCA Reconciliation Sublayer. It adds get/set configuration and get status functions. Additionally, shows PLCA capabilities and status when invoked without arguments.

Piergiorgio Beruto (2):
update UAPI header copies
add support for IEEE 802.3cg-2019 Clause 148 - PLCA RS

 Makefile.am                  |   1 +
 ethtool.c                    |  21 +++
 netlink/extapi.h             |   6 +
 netlink/plca.c               | 295 +++++++++++++++++++++++++++++++++++
 netlink/settings.c           |  89 ++++++++++-
 uapi/linux/ethtool.h         |   3 +
 uapi/linux/ethtool_netlink.h |  39 +++++
 7 files changed, 452 insertions(+), 2 deletions(-)
 create mode 100644 netlink/plca.c
Signature · 1 line
2.37.4
#1 lore raw

PATCH v3 1/2 update UAPI header copies

Update to kernel commit 9f6c9504c56e.

---
 uapi/linux/ethtool.h         |  3 +++
 uapi/linux/ethtool_netlink.h | 39 ++++++++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+)
uapi/linux/ethtool.h +3 -0
index d1748702bddc..78bf6fad9e02 100644
@@ -1739,6 +1739,9 @@ enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT	 = 96,
 	ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT	 = 97,
 	ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT	 = 98,
+	ETHTOOL_LINK_MODE_10baseT1S_Full_BIT		 = 99,
+	ETHTOOL_LINK_MODE_10baseT1S_Half_BIT		 = 100,
+	ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT	 = 101,
 
 	/* must be last entry */
 	__ETHTOOL_LINK_MODE_MASK_NBITS
uapi/linux/ethtool_netlink.h +39 -0
index d581c43d592d..7e116fbe911f 100644
@@ -51,6 +51,10 @@ enum {
 	ETHTOOL_MSG_MODULE_SET,
 	ETHTOOL_MSG_PSE_GET,
 	ETHTOOL_MSG_PSE_SET,
+	ETHTOOL_MSG_RSS_GET,
+	ETHTOOL_MSG_PLCA_GET_CFG,
+	ETHTOOL_MSG_PLCA_SET_CFG,
+	ETHTOOL_MSG_PLCA_GET_STATUS,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_USER_CNT,
@@ -97,6 +101,10 @@ enum {
 	ETHTOOL_MSG_MODULE_GET_REPLY,
 	ETHTOOL_MSG_MODULE_NTF,
 	ETHTOOL_MSG_PSE_GET_REPLY,
+	ETHTOOL_MSG_RSS_GET_REPLY,
+	ETHTOOL_MSG_PLCA_GET_CFG_REPLY,
+	ETHTOOL_MSG_PLCA_GET_STATUS_REPLY,
+	ETHTOOL_MSG_PLCA_NTF,
 
 	/* add new constants above here */
 	__ETHTOOL_MSG_KERNEL_CNT,
@@ -880,6 +888,37 @@ enum {
 	ETHTOOL_A_PSE_MAX = (__ETHTOOL_A_PSE_CNT - 1)
 };
 
+enum {
+	ETHTOOL_A_RSS_UNSPEC,
+	ETHTOOL_A_RSS_HEADER,
+	ETHTOOL_A_RSS_CONTEXT,		/* u32 */
+	ETHTOOL_A_RSS_HFUNC,		/* u32 */
+	ETHTOOL_A_RSS_INDIR,		/* binary */
+	ETHTOOL_A_RSS_HKEY,		/* binary */
+
+	__ETHTOOL_A_RSS_CNT,
+	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),
+};
+
+/* PLCA */
+
+enum {
+	ETHTOOL_A_PLCA_UNSPEC,
+	ETHTOOL_A_PLCA_HEADER,			/* nest - _A_HEADER_* */
+	ETHTOOL_A_PLCA_VERSION,			/* u16 */
+	ETHTOOL_A_PLCA_ENABLED,			/* u32 */
+	ETHTOOL_A_PLCA_STATUS,			/* u32 */
+	ETHTOOL_A_PLCA_NODE_CNT,		/* u32 */
+	ETHTOOL_A_PLCA_NODE_ID,			/* u32 */
+	ETHTOOL_A_PLCA_TO_TMR,			/* u32 */
+	ETHTOOL_A_PLCA_BURST_CNT,		/* u32 */
+	ETHTOOL_A_PLCA_BURST_TMR,		/* u32 */
+
+	/* add new constants above here */
+	__ETHTOOL_A_PLCA_CNT,
+	ETHTOOL_A_PLCA_MAX = (__ETHTOOL_A_PLCA_CNT - 1)
+};
+
 /* generic netlink info */
 #define ETHTOOL_GENL_NAME "ethtool"
 #define ETHTOOL_GENL_VERSION 1
Signature · 1 line
2.37.4
#2 lore raw

PATCH v3 2/2 add support for IEEE 802.3cg-2019 Clause 148 - PLCA RS

In reply to Piergiorgio Beruto

This patch adds support for the Physical Layer Collision Avoidance Reconciliation Sublayer which was introduced in the IEEE 802.3 standard by the 802.3cg working group in 2019.

The ethtool interface has been extended as follows:
- show if the device supports PLCA when ethtool is invoked without FLAGS
- additionally show what PLCA version is supported
- show the current PLCA status
- add FLAGS for getting and setting the PLCA configuration

---
 Makefile.am        |   1 +
 ethtool.c          |  21 ++++
 netlink/extapi.h   |   6 +
 netlink/plca.c     | 295 +++++++++++++++++++++++++++++++++++++++++++++
 netlink/settings.c |  89 +++++++++++++-
 5 files changed, 410 insertions(+), 2 deletions(-)
 create mode 100644 netlink/plca.c
Makefile.am +1 -0
index fcc912edd7e4..b184b8ceb28a 100644
@@ -41,6 +41,7 @@ ethtool_SOURCES += \
 		  netlink/desc-ethtool.c netlink/desc-genlctrl.c \
 		  netlink/module-eeprom.c netlink/module.c \
 		  netlink/desc-rtnl.c netlink/cable_test.c netlink/tunnels.c \
+		  netlink/plca.c \
 		  uapi/linux/ethtool_netlink.h \
 		  uapi/linux/netlink.h uapi/linux/genetlink.h \
 		  uapi/linux/rtnetlink.h uapi/linux/if_link.h
ethtool.c +21 -0
index 3207e49137c4..d23406f54a37 100644
@@ -6075,6 +6075,27 @@ static const struct option args[] = {
 		.help	= "Set transceiver module settings",
 		.xhelp	= "		[ power-mode-policy high|auto ]\n"
 	},
+	{
+		.opts	= "--get-plca-cfg",
+		.nlfunc	= nl_plca_get_cfg,
+		.help	= "Get PLCA configuration",
+	},
+	{
+		.opts	= "--set-plca-cfg",
+		.nlfunc	= nl_plca_set_cfg,
+		.help	= "Set PLCA configuration",
+		.xhelp  = "             [ enable on|off ]\n"
+			  "             [ node-id N ]\n"
+			  "             [ node-cnt N ]\n"
+			  "             [ to-tmr N ]\n"
+			  "             [ burst-cnt N ]\n"
+			  "             [ burst-tmr N ]\n"
+	},
+	{
+		.opts	= "--get-plca-status",
+		.nlfunc	= nl_plca_get_status,
+		.help	= "Get PLCA status information",
+	},
 	{
 		.opts	= "-h|--help",
 		.no_dev	= true,
netlink/extapi.h +6 -0
index 1bb580a889a8..0add156e644a 100644
@@ -47,6 +47,9 @@ int nl_gmodule(struct cmd_context *ctx);
 int nl_smodule(struct cmd_context *ctx);
 int nl_monitor(struct cmd_context *ctx);
 int nl_getmodule(struct cmd_context *ctx);
+int nl_plca_get_cfg(struct cmd_context *ctx);
+int nl_plca_set_cfg(struct cmd_context *ctx);
+int nl_plca_get_status(struct cmd_context *ctx);
 
 void nl_monitor_usage(void);
 
@@ -114,6 +117,9 @@ nl_get_eeprom_page(struct cmd_context *ctx __maybe_unused,
 #define nl_getmodule		NULL
 #define nl_gmodule		NULL
 #define nl_smodule		NULL
+#define nl_get_plca_cfg		NULL
+#define nl_set_plca_cfg		NULL
+#define nl_get_plca_status	NULL
 
 #endif /* ETHTOOL_ENABLE_NETLINK */
 
netlink/plca.c new file +295 -0

295 lines not on this page · raw message

netlink/settings.c +87 -2

125 lines not on this page · raw message

Signature · 1 line
2.37.4