staging: rtl8192e: Remove unused constants and variables from r8192E_hw.h
cover staging: rtl8192e: Remove unused constants and variables from r8192E_hw.h
Remove unused constants and variables from r8192E_hw.h Fix checkpatch issues as CamelCase and missing spaces. Remove dead code.
Tested with rtl8192e
Transferred this patch over wlan connection of rtl8192e
Philipp Hortmann (10):
staging: rtl8192e: Rename TxBBGainTab.., CCKTxBBGainTab.. and
RT_CID_81..
staging: rtl8192e: Rename sCrcLng
staging: rtl8192e: Remove unused variable rxSNRdB
staging: rtl8192e: Remove unused constants from enum rt_customer_id
staging: rtl8192e: Rename BaseBand_Config_PHY_REG and
BaseBand_Config_AGC_TAB
staging: rtl8192e: Remove unused constants at beginning of r8192E_hw.h
staging: rtl8192e: Remove unused constants in _RTL8192Pci_HW
staging: rtl8192e: Remove used constants MSR_LINK_SH.. and
MSR_LINK_N.. staging: rtl8192e: Rename _RTL8192Pci_HW, MXDMA2_NoLimit and TPPoll
staging: rtl8192e: Rename TPPoll_CQ, AcmHwCtrl and AcmHw_BeqEn
.../rtl8192e/rtl8192e/r8190P_rtl8256.c | 2 +- .../staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c | 2 +- .../staging/rtl8192e/rtl8192e/r8192E_dev.c | 43 ++-- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 204 +----------------- .../staging/rtl8192e/rtl8192e/r8192E_phy.c | 16 +- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 4 +- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 31 +-- drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 30 +-- drivers/staging/rtl8192e/rtl8192e/rtl_dm.h | 6 +- 9 files changed, 60 insertions(+), 278 deletions(-)
Signature · 1 line
2.39.1
PATCH 1/10 staging: rtl8192e: Rename TxBBGainTab.., CCKTxBBGainTab.. and RT_CID_81..
Rename constant TxBBGainTableLength to TX_BB_GAIN_TABLE_LEN, CCKTxBBGainTableLength to CCK_TX_BB_GAIN_TABLE_LEN and RT_CID_819x_Netcore to RT_CID_819X_NETCORE to avoid CamelCase which is not accepted by checkpatch. Added spaces before and after "-" to fix checkpatch message.
Signed-off-by Philipp Hortmann <[email protected]>
--- .../rtl8192e/rtl8192e/r8190P_rtl8256.c | 2 +- .../staging/rtl8192e/rtl8192e/r8192E_dev.c | 6 ++-- .../staging/rtl8192e/rtl8192e/r8192E_phy.c | 8 ++--- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 6 ++-- drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 30 +++++++++---------- drivers/staging/rtl8192e/rtl8192e/rtl_dm.h | 6 ++-- 6 files changed, 29 insertions(+), 29 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8190P_rtl8256.c +1 -1
@@ -151,7 +151,7 @@ void rtl92e_set_cck_tx_power(struct net_device *dev, u8 powerlevel) TxAGC = powerlevel;if (priv->dynamic_tx_low_pwr) { -if (priv->customer_id == RT_CID_819x_Netcore) +if (priv->customer_id ==RT_CID_819X_NETCORE ) TxAGC =0x22 ;else TxAGC += priv->cck_pwr_enl;
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +3 -3
@@ -460,7 +460,7 @@ static void _rtl92e_read_eeprom_info(struct net_device *dev) priv->customer_id = RT_CID_819x_RUNTOP;break ;case EEPROM_CID_NetCore: - priv->customer_id = RT_CID_819x_Netcore; + priv->customer_id =RT_CID_819X_NETCORE ;break ;case EEPROM_CID_TOSHIBA : priv->customer_id =RT_CID_TOSHIBA ;
@@ -741,7 +741,7 @@ bool rtl92e_start_adapter(struct net_device *dev) bMaskDWord);rtl92e_get_bb_reg (dev, rOFDM0_XCTxIQImbalance, bMaskDWord); -for (i =0 ; i < TxBBGainTableLength; i++) { +for (i =0 ; i <TX_BB_GAIN_TABLE_LEN ; i++) {if (tmpRegA == dm_tx_bb_gain[i]) { priv->rfa_txpowertrackingindex = i; priv->rfa_txpowertrackingindex_real = i;
@@ -754,7 +754,7 @@ bool rtl92e_start_adapter(struct net_device *dev) TempCCk =rtl92e_get_bb_reg (dev, rCCK0_TxFilter1, bMaskByte2); -for (i =0 ; i < CCKTxBBGainTableLength; i++) { +for (i =0 ; i <CCK_TX_BB_GAIN_TABLE_LEN ; i++) {if (TempCCk == dm_cck_tx_bb_gain[i][0 ]) { priv->cck_present_attn_20m_def = i;break ;
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c +4 -4
@@ -991,9 +991,9 @@ static void _rtl92e_cck_tx_power_track_bw_switch_tssi(struct net_device *dev) priv->cck_present_attn_diff;if (priv->cck_present_attn > - (CCKTxBBGainTableLength-1 )) + (CCK_TX_BB_GAIN_TABLE_LEN -1 )) priv->cck_present_attn = - CCKTxBBGainTableLength-1 ; +CCK_TX_BB_GAIN_TABLE_LEN -1 ;if (priv->cck_present_attn <0 ) priv->cck_present_attn =0 ;
@@ -1016,9 +1016,9 @@ static void _rtl92e_cck_tx_power_track_bw_switch_tssi(struct net_device *dev) priv->cck_present_attn_diff;if (priv->cck_present_attn > - (CCKTxBBGainTableLength -1 )) + (CCK_TX_BB_GAIN_TABLE_LEN -1 )) priv->cck_present_attn = - CCKTxBBGainTableLength-1 ; +CCK_TX_BB_GAIN_TABLE_LEN -1 ;if (priv->cck_present_attn <0 ) priv->cck_present_attn =0 ;
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +3 -3
@@ -90,8 +90,8 @@#define PHY_RSSI_SLID_WIN_MAX 100 -#define TxBBGainTableLength 37 -#define CCKTxBBGainTableLength 23 +#define TX_BB_GAIN_TABLE_LEN 37 +#define CCK_TX_BB_GAIN_TABLE_LEN 23#define CHANNEL_PLAN_LEN 10#define sCrcLng 4
@@ -154,7 +154,7 @@ enum rt_customer_id { RT_CID_819x_RUNTOP =7 , RT_CID_819x_Senao =8 ,RT_CID_TOSHIBA =9 , - RT_CID_819x_Netcore =10 , +RT_CID_819X_NETCORE =10 , RT_CID_Nettronix =11 ,RT_CID_DLINK =12 , RT_CID_PRONET = 13,
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c +15 -15
@@ -46,7 +46,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = {0x5e4332 }; -const u32 dm_tx_bb_gain[TxBBGainTableLength] = { +const u32 dm_tx_bb_gain[TX_BB_GAIN_TABLE_LEN ] = {0x7f8001fe ,/* 12 dB */ 0x788001e2 ,/* 11 dB */ 0x71c001c7 ,
@@ -86,7 +86,7 @@ const u32 dm_tx_bb_gain[TxBBGainTableLength] = { 0x10000040, /* -24 dB */ }; -const u8 dm_cck_tx_bb_gain[CCKTxBBGainTableLength][8 ] = { +const u8 dm_cck_tx_bb_gain[CCK_TX_BB_GAIN_TABLE_LEN ][8 ] = { {0x36 ,0x35 ,0x2e ,0x25 ,0x1c ,0x12 ,0x09 ,0x04 }, {0x33 ,0x32 ,0x2b ,0x23 ,0x1a ,0x11 ,0x08 ,0x04 }, {0x30 ,0x2f ,0x29 ,0x21 ,0x19 ,0x10 ,0x08 ,0x03 },
@@ -112,7 +112,7 @@ const u8 dm_cck_tx_bb_gain[CCKTxBBGainTableLength][8] = { {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01} }; -const u8 dm_cck_tx_bb_gain_ch14[CCKTxBBGainTableLength][8 ] = { +const u8 dm_cck_tx_bb_gain_ch14[CCK_TX_BB_GAIN_TABLE_LEN ][8 ] = { {0x36 ,0x35 ,0x2e ,0x1b ,0x00 ,0x00 ,0x00 ,0x00 }, {0x33 ,0x32 ,0x2b ,0x19 ,0x00 ,0x00 ,0x00 ,0x00 }, {0x30 ,0x2f ,0x29 ,0x18 ,0x00 ,0x00 ,0x00 ,0x00 },
@@ -290,7 +290,7 @@ void rtl92e_init_adaptive_rate(struct net_device *dev) pra->low_rssi_thresh_for_ra20M = RateAdaptiveTH_Low_20M; pra->low_rssi_thresh_for_ra40M = RateAdaptiveTH_Low_40M; -if (priv->customer_id == RT_CID_819x_Netcore) +if (priv->customer_id ==RT_CID_819X_NETCORE ) pra->ping_rssi_enable =1 ;else pra->ping_rssi_enable =0 ;
@@ -568,8 +568,8 @@ static void _rtl92e_dm_tx_update_tssi_strong_signal(struct net_device *dev,struct r8192_priv *p =rtllib_priv (dev);if (RF_Type ==RF_2T4R ) { -if ((p->rfa_txpowertrackingindex < TxBBGainTableLength -1 ) && - (p->rfc_txpowertrackingindex < TxBBGainTableLength -1 )) { +if ((p->rfa_txpowertrackingindex <TX_BB_GAIN_TABLE_LEN -1 ) && + (p->rfc_txpowertrackingindex <TX_BB_GAIN_TABLE_LEN -1 )) { p->rfa_txpowertrackingindex++; p->rfa_txpowertrackingindex_real++; rtl92e_set_bb_reg(dev, rOFDM0_XATxIQImbalance,
@@ -583,13 +583,13 @@ static void _rtl92e_dm_tx_update_tssi_strong_signal(struct net_device *dev, }else {rtl92e_set_bb_reg (dev, rOFDM0_XATxIQImbalance, bMaskDWord, - dm_tx_bb_gain[TxBBGainTableLength -1 ]); + dm_tx_bb_gain[TX_BB_GAIN_TABLE_LEN -1 ]);rtl92e_set_bb_reg (dev, rOFDM0_XCTxIQImbalance, bMaskDWord, - dm_tx_bb_gain[TxBBGainTableLength -1 ]); + dm_tx_bb_gain[TX_BB_GAIN_TABLE_LEN -1 ]); } }else { -if (p->rfa_txpowertrackingindex < (TxBBGainTableLength -1 )) { +if (p->rfa_txpowertrackingindex < (TX_BB_GAIN_TABLE_LEN -1 )) { p->rfa_txpowertrackingindex++; p->rfa_txpowertrackingindex_real++; rtl92e_set_bb_reg(dev, rOFDM0_XATxIQImbalance,
@@ -598,7 +598,7 @@ static void _rtl92e_dm_tx_update_tssi_strong_signal(struct net_device *dev, }else {rtl92e_set_bb_reg (dev, rOFDM0_XATxIQImbalance, bMaskDWord, - dm_tx_bb_gain[TxBBGainTableLength -1 ]); + dm_tx_bb_gain[TX_BB_GAIN_TABLE_LEN -1 ]); } } }
@@ -722,13 +722,13 @@ static void _rtl92e_dm_tx_power_tracking_callback_tssi(struct net_device *dev) priv->cck_present_attn_40m_def + priv->cck_present_attn_diff; -if (priv->cck_present_attn > (CCKTxBBGainTableLength-1 )) - priv->cck_present_attn = CCKTxBBGainTableLength-1 ; +if (priv->cck_present_attn > (CCK_TX_BB_GAIN_TABLE_LEN -1 )) + priv->cck_present_attn =CCK_TX_BB_GAIN_TABLE_LEN -1 ;if (priv->cck_present_attn <0 ) priv->cck_present_attn =0 ;if (priv->cck_present_attn >-1 && - priv->cck_present_attn < CCKTxBBGainTableLength) { + priv->cck_present_attn <CCK_TX_BB_GAIN_TABLE_LEN ) {if (priv->rtllib->current_network.channel ==14 && !priv->bcck_in_ch14) { priv->bcck_in_ch14 = true;
@@ -1148,7 +1148,7 @@ static void _rtl92e_dm_dig_init(struct net_device *dev) dm_digtable.rssi_val =50 ; dm_digtable.backoff_val =DM_DIG_BACKOFF ; dm_digtable.rx_gain_range_max =DM_DIG_MAX ; -if (priv->customer_id == RT_CID_819x_Netcore) +if (priv->customer_id ==RT_CID_819X_NETCORE ) dm_digtable.rx_gain_range_min = DM_DIG_MIN_Netcore;else dm_digtable.rx_gain_range_min =DM_DIG_MIN ;
@@ -1734,7 +1734,7 @@ static void _rtl92e_dm_init_rx_path_selection(struct net_device *dev) DM_RxPathSelTable.Enable =1 ; DM_RxPathSelTable.SS_TH_low = RxPathSelection_SS_TH_low; DM_RxPathSelTable.diff_TH = RxPathSelection_diff_TH; -if (priv->customer_id == RT_CID_819x_Netcore) +if (priv->customer_id ==RT_CID_819X_NETCORE ) DM_RxPathSelTable.cck_method = CCK_Rx_Version_2;else DM_RxPathSelTable.cck_method = CCK_Rx_Version_1;
drivers/staging/rtl8192e/rtl8192e/rtl_dm.h +3 -3
@@ -162,9 +162,9 @@ extern struct dig_t dm_digtable;extern struct drx_path_sel DM_RxPathSelTable;/* Pre-calculated gain tables */ -extern const u32 dm_tx_bb_gain[TxBBGainTableLength]; -extern const u8 dm_cck_tx_bb_gain[CCKTxBBGainTableLength][8 ]; -extern const u8 dm_cck_tx_bb_gain_ch14[CCKTxBBGainTableLength][8 ]; +extern const u32 dm_tx_bb_gain[TX_BB_GAIN_TABLE_LEN ]; +extern const u8 dm_cck_tx_bb_gain[CCK_TX_BB_GAIN_TABLE_LEN ][8 ]; +extern const u8 dm_cck_tx_bb_gain_ch14[CCK_TX_BB_GAIN_TABLE_LEN ][8 ];/* Maps table index to iq amplify gain (dB, 12 to -24dB) */ #define dm_tx_bb_gain_idx_to_amplify (idx) (-idx + 12)
Signature · 1 line
2.39.1
PATCH 2/10 staging: rtl8192e: Rename sCrcLng
In reply to Philipp HortmannRename constant sCrcLng to S_CRC_LEN to avoid CamelCase which is not accepted by checkpatch. Use S_CRC_LEN instead of fix value with comment to improve readability.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 2 +- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 2 +- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +1 -1
@@ -1827,7 +1827,7 @@ bool rtl92e_get_rx_stats(struct net_device *dev, struct rtllib_rx_stats *stats, stats->RxIs40MHzPacket = pDrvInfo->BW;_rtl92e_translate_rx_signal_stats (dev, skb, stats, pdesc, pDrvInfo); -skb_trim (skb, skb->len -4 /*sCrcLng*/ ); +skb_trim (skb, skb->len -S_CRC_LEN ); stats->packetlength = stats->Length-4 ;
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -1
@@ -1906,7 +1906,7 @@ static void _rtl92e_rx_normal(struct net_device *dev)skb_put (skb, pdesc->Length);skb_reserve (skb, stats.RxDrvInfoSize + stats.RxBufShift); -skb_trim (skb, skb->len -4 /*sCrcLng*/ ); +skb_trim (skb, skb->len -S_CRC_LEN ); rtllib_hdr = (struct rtllib_hdr_1addr *)skb->data;if (!is_multicast_ether_addr (rtllib_hdr->addr1)) {/* unicast packet */
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +1 -1
@@ -94,7 +94,7 @@#define CCK_TX_BB_GAIN_TABLE_LEN 23#define CHANNEL_PLAN_LEN 10 -#define sCrcLng 4 +#define S_CRC_LEN 4#define NIC_SEND_HANG_THRESHOLD_NORMAL 4#define NIC_SEND_HANG_THRESHOLD_POWERSAVE 8
Signature · 1 line
2.39.1
PATCH 3/10 staging: rtl8192e: Remove unused variable rxSNRdB
In reply to Philipp HortmannrxSNRdB is initialized and set but never read. Remove dead code. Local variable rx_snrX is then of no use. Remove rx_snrX as well. Local variable tmp_rxsnr is then of no use. Remove tmp_rxsnr as well.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 9 ++------- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 - 2 files changed, 2 insertions(+), 8 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +2 -7
@@ -1297,9 +1297,9 @@ static void _rtl92e_query_rxphystatus(struct phy_sts_ofdm_819xpci *pofdm_buf;struct phy_sts_cck_819xpci *pcck_buf;u8 *prxpkt; -u8 i, max_spatial_stream, tmp_rxsnr, tmp_rxevm; +u8 i, max_spatial_stream, tmp_rxevm;s8 rx_pwr[4 ], rx_pwr_all =0 ; -s8 rx_snrX, rx_evmX; +s8 rx_evmX;u8 evm, pwdb_all;u32 RSSI , total_rssi =0 ;u8 is_cck_rate =0 ;
@@ -1419,11 +1419,6 @@ static void _rtl92e_query_rxphystatus( rx_pwr[i] = ((pofdm_buf->trsw_gain_X[i] &0x3F ) *2 ) -110 ; - tmp_rxsnr = pofdm_buf->rxsnr_X[i]; - rx_snrX = (s8)(tmp_rxsnr); - rx_snrX /=2 ; - priv->stats.rxSNRdB[i] = (long )rx_snrX; -RSSI =rtl92e_rx_db_to_percent (rx_pwr[i]);if (priv->brfpath_rxenable[i]) total_rssi +=RSSI ;
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
@@ -197,7 +197,6 @@ struct rt_stats {long recv_signal_power;u8 rx_rssi_percentage[4 ];u8 rx_evm_percentage[2 ]; -long rxSNRdB[4 ];u32 slide_beacon_pwdb[100 ];u32 slide_beacon_total;u32 CurrentShowTxate;
Signature · 1 line
2.39.1
PATCH 4/10 staging: rtl8192e: Remove unused constants from enum rt_customer_id
In reply to Philipp HortmannRemove unused constants from enum rt_customer_id. A part of the constants would need to be renamed because of CamelCase.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 22 -------------------- 1 file changed, 22 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -22
@@ -145,35 +145,13 @@ enum rt_rf_type_819xu {enum rt_customer_id {RT_CID_DEFAULT =0 , -RT_CID_8187_ALPHA0 =1 , -RT_CID_8187_SERCOMM_PS =2 , -RT_CID_8187_HW_LED =3 , -RT_CID_8187_NETGEAR =4 , -RT_CID_WHQL =5 , RT_CID_819x_CAMEO =6 , RT_CID_819x_RUNTOP =7 , - RT_CID_819x_Senao =8 ,RT_CID_TOSHIBA =9 ,RT_CID_819X_NETCORE =10 , RT_CID_Nettronix =11 ,RT_CID_DLINK =12 ,RT_CID_PRONET =13 , -RT_CID_COREGA =14 , - RT_CID_819x_ALPHA =15 , - RT_CID_819x_Sitecom =16 , -RT_CID_CCX =17 , - RT_CID_819x_Lenovo =18 , - RT_CID_819x_QMI =19 , - RT_CID_819x_Edimax_Belkin =20 , - RT_CID_819x_Sercomm_Belkin =21 , - RT_CID_819x_CAMEO1 =22 , - RT_CID_819x_MSI =23 , - RT_CID_819x_Acer =24 , - RT_CID_819x_HP =27 , - RT_CID_819x_CLEVO =28 , - RT_CID_819x_Arcadyan_Belkin =29 , - RT_CID_819x_SAMSUNG =30 , - RT_CID_819x_WNC_COREGA =31 , };enum reset_type {
Signature · 1 line
2.39.1
PATCH 5/10 staging: rtl8192e: Rename BaseBand_Config_PHY_REG and BaseBand_Config_AGC_TAB
In reply to Philipp HortmannRename constants BaseBand_Config_PHY_REG to BB_CONFIG_PHY_REG and BaseBand_Config_AGC_TAB to BB_CONFIG_AGC_TAB to avoid CamelCase which is not accepted by checkpatch.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 4 ++-- drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h +2 -2
@@ -8,8 +8,8 @@#define R8180_HW enum baseband_config { - BaseBand_Config_PHY_REG =0 , - BaseBand_Config_AGC_TAB =1 , +BB_CONFIG_PHY_REG =0 , +BB_CONFIG_AGC_TAB =1 , };#define RTL8187_REQT_READ 0xc0
drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c +4 -4
@@ -342,13 +342,13 @@ static void _rtl92e_phy_config_bb(struct net_device *dev, u8 ConfigType) Rtl819XPHY_REGArray_Table = Rtl819XPHY_REG_1T2RArray; } -if (ConfigType == BaseBand_Config_PHY_REG) { +if (ConfigType ==BB_CONFIG_PHY_REG ) {for (i =0 ; i < PHY_REGArrayLen; i +=2 ) {rtl92e_set_bb_reg (dev, Rtl819XPHY_REGArray_Table[i], bMaskDWord, Rtl819XPHY_REGArray_Table[i+1 ]); } - }else if (ConfigType == BaseBand_Config_AGC_TAB) { + }else if (ConfigType ==BB_CONFIG_AGC_TAB ) {for (i =0 ; i < AGCTAB_ArrayLen; i +=2 ) { rtl92e_set_bb_reg(dev, Rtl819XAGCTAB_Array_Table[i], bMaskDWord,
@@ -526,12 +526,12 @@ static bool _rtl92e_bb_config_para_file(struct net_device *dev)return rtStatus; }rtl92e_set_bb_reg (dev, rFPGA0_RFMOD, bCCKEn|bOFDMEn,0x0 ); -_rtl92e_phy_config_bb (dev, BaseBand_Config_PHY_REG); +_rtl92e_phy_config_bb (dev,BB_CONFIG_PHY_REG ); dwRegValue =rtl92e_readl (dev,CPU_GEN );rtl92e_writel (dev,CPU_GEN , (dwRegValue|CPU_GEN_BB_RST )); -_rtl92e_phy_config_bb (dev, BaseBand_Config_AGC_TAB); +_rtl92e_phy_config_bb (dev,BB_CONFIG_AGC_TAB );if (priv->ic_cut >VERSION_8190_BD ) {if (priv->rf_type ==RF_2T4R )
Signature · 1 line
2.39.1
PATCH 6/10 staging: rtl8192e: Remove unused constants at beginning of r8192E_hw.h
In reply to Philipp HortmannRemove unused constants at beginning of r8192E_hw.h. A part of the constants would need to be renamed because of CamelCase on others spaces are missing before and after "<<".
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 38 +------------------ 1 file changed, 1 insertion(+), 37 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h +1 -37
@@ -12,63 +12,27 @@ enum baseband_config { BB_CONFIG_AGC_TAB = 1, }; -#define RTL8187_REQT_READ 0xc0 -#define RTL8187_REQT_WRITE 0x40 -#define RTL8187_REQ_GET_REGS 0x05 -#define RTL8187_REQ_SET_REGS 0x05 - -#define MAX_TX_URB 5 -#define MAX_RX_URB 16 -#define RX_URB_SIZE 9100 - -#define BB_ANTATTEN_CHAN14 0x0c -#define BB_ANTENNA_B 0x40 - -#define BB_HOST_BANG (1<<30) -#define BB_HOST_BANG_EN (1<<2) -#define BB_HOST_BANG_CLK (1<<1) -#define BB_HOST_BANG_RW (1<<3) -#define BB_HOST_BANG_DATA 1 -#define RTL8190_EEPROM_ID 0x8129#define EEPROM_VID 0x02#define EEPROM_DID 0x04#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C -#define EEPROM_TxPowerDiff 0x1F - - -#define EEPROM_PwDiff 0x21 -#define EEPROM_CrystalCap 0x22 - - - -#define EEPROM_TxPwIndex_CCK_V1 0x29 -#define EEPROM_TxPwIndex_OFDM_24G_V1 0x2C -#define EEPROM_TxPwIndex_Ver 0x27 - -#define EEPROM_Default_TxPowerDiff 0x0#define EEPROM_Default_ThermalMeter 0x77#define EEPROM_Default_AntTxPowerDiff 0x0#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 -#define EEPROM_Default_PwDiff 0x4 -#define EEPROM_Default_CrystalCap 0x5#define EEPROM_Default_TxPower 0x1010#define EEPROM_ICVersion_ChannelPlan 0x7C#define EEPROM_Customer_ID 0x7B#define EEPROM_RFInd_PowerDiff 0x28 +#define EEPROM_ThermalMeter 0x29#define EEPROM_TxPwDiff_CrystalCap 0x2A#define EEPROM_TxPwIndex_CCK 0x2C#define EEPROM_TxPwIndex_OFDM_24G 0x3A -#define EEPROM_Default_TxPowerLevel 0x10 -#define EEPROM_IC_VER 0x7d -#define EEPROM_CRC 0x7e#define EEPROM_CID_DEFAULT 0x0#define EEPROM_CID_CAMEO 0x1#define EEPROM_CID_RUNTOP 0x2 -#define EEPROM_CID_Senao 0x3#define EEPROM_CID_TOSHIBA 0x4#define EEPROM_CID_NetCore 0x5#define EEPROM_CID_Nettronix 0x6
Signature · 1 line
2.39.1
PATCH 7/10 staging: rtl8192e: Remove unused constants in _RTL8192Pci_HW
In reply to Philipp HortmannRemove unused constants in and after _RTL8192Pci_HW of r8192E_hw.h. A part of the constants would need to be renamed because of CamelCase on others spaces are missing before and after "<<".
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 148 +----------------- 1 file changed, 1 insertion(+), 147 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h +1 -147
@@ -41,72 +41,39 @@ enum baseband_config {#define EEPROM_CID_WHQL 0xFEenum _RTL8192Pci_HW {MAC0 =0x000 , -MAC1 =0x001 , -MAC2 =0x002 , -MAC3 =0x003 ,MAC4 =0x004 , -MAC5 =0x005 ,PCIF =0x009 , -#define MXDMA2_16bytes 0x000 -#define MXDMA2_32bytes 0x001 -#define MXDMA2_64bytes 0x010 -#define MXDMA2_128bytes 0x011 -#define MXDMA2_256bytes 0x100 -#define MXDMA2_512bytes 0x101 -#define MXDMA2_1024bytes 0x110 #define MXDMA2_NoLimit 0x7 -#define MULRW_SHIFT 3 #define MXDMA2_RX_SHIFT 4 #define MXDMA2_TX_SHIFT 0PMR =0x00c ,EPROM_CMD =0x00e , -#define EPROM_CMD_RESERVED_MASK BIT5 + #define EPROM_CMD_9356SEL BIT4 #define EPROM_CMD_OPERATING_MODE_SHIFT 6 -#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6)) -#define EPROM_CMD_CONFIG 0x3 #define EPROM_CMD_NORMAL 0 -#define EPROM_CMD_LOAD 1 #define EPROM_CMD_PROGRAM 2 #define EPROM_CS_BIT 3 #define EPROM_CK_BIT 2 #define EPROM_W_BIT 1 #define EPROM_R_BIT 0 -AFR =0x010 , -#define AFR_CardBEn (1<<0) -#define AFR_CLKRUN_SEL (1<<1) -#define AFR_FuncRegEn (1<<2) -ANAPAR =0x17 ,#define BB_GLOBAL_RESET_BIT 0x1 BB_GLOBAL_RESET = 0x020,BSSIDR =0x02E ,CMDR =0x037 , -#define CR_RST 0x10 #define CR_RE 0x08 #define CR_TE 0x04 -#define CR_MulRW 0x01SIFS =0x03E , -TCR =0x040 ,RCR =0x044 , -#define RCR_FILTER_MASK (BIT0 | BIT1 | BIT2 | BIT3 | BIT5 | BIT12 | \ - BIT18 | BIT19 | BIT20 | BIT21 | BIT22 | BIT23)#define RCR_ONLYERLPKT BIT31 -#define RCR_ENCS2 BIT30 -#define RCR_ENCS1 BIT29 -#define RCR_ENMBID BIT27 -#define RCR_ACKTXBW (BIT24|BIT25) #define RCR_CBSSID BIT23 -#define RCR_APWRMGT BIT22 #define RCR_ADD3 BIT21 #define RCR_AMF BIT20 -#define RCR_ACF BIT19 #define RCR_ADF BIT18 -#define RCR_RXFTH BIT13 #define RCR_AICV BIT12 -#define RCR_ACRC32 BIT5 #define RCR_AB BIT3 #define RCR_AM BIT2 #define RCR_APM BIT1
@@ -115,8 +82,6 @@ enum _RTL8192Pci_HW {#define RCR_FIFO_OFFSET 13SLOT_TIME =0x049 ,ACK_TIMEOUT =0x04c , -PIFS_TIME =0x04d , -USTIME =0x04e ,EDCAPARA_BE =0x050 ,EDCAPARA_BK =0x054 , EDCAPARA_VO = 0x058,
@@ -125,53 +90,25 @@ enum _RTL8192Pci_HW {#define AC_PARAM_ECW_MAX_OFFSET 12#define AC_PARAM_ECW_MIN_OFFSET 8#define AC_PARAM_AIFS_OFFSET 0 - RFPC = 0x05F, - CWRR = 0x060, BCN_TCFG = 0x062,#define BCN_TCFG_CW_SHIFT 8#define BCN_TCFG_IFS 0BCN_INTERVAL =0x070 ,ATIMWND =0x072 ,BCN_DRV_EARLY_INT =0x074 , -#define BCN_DRV_EARLY_INT_SWBCN_SHIFT 8 -#define BCN_DRV_EARLY_INT_TIME_SHIFT 0BCN_DMATIME =0x076 ,BCN_ERR_THRESH =0x078 ,RWCAM =0x0A0 , -#define CAM_CM_SecCAMPolling BIT31 -#define CAM_CM_SecCAMClr BIT30 -#define CAM_CM_SecCAMWE BIT16 -#define CAM_VALID BIT15 -#define CAM_NOTVALID 0x0000 -#define CAM_USEDK BIT5 - -#define CAM_NONE 0x0 -#define CAM_WEP40 0x01 -#define CAM_TKIP 0x02 -#define CAM_AES 0x04 -#define CAM_WEP104 0x05 - #define TOTAL_CAM_ENTRY 32 - -#define CAM_CONFIG_USEDK true -#define CAM_CONFIG_NO_USEDK false -#define CAM_WRITE BIT16 -#define CAM_READ 0x00000000 -#define CAM_POLLINIG BIT31 -#define SCR_UseDK 0x01WCAMI =0x0A4 , - RCAMO = 0x0A8,SECR =0x0B0 , #define SCR_TxUseDK BIT0 #define SCR_RxUseDK BIT1 #define SCR_TxEncEnable BIT2 #define SCR_RxDecEnable BIT3 -#define SCR_SKByA2 BIT4 #define SCR_NoSKMC BIT5SWREGULATOR =0x0BD ,INTA_MASK =0x0f4 , -#define IMR8190_DISABLED 0x0 -#define IMR_ATIMEND BIT28 #define IMR_TBDOK BIT27 #define IMR_TBDER BIT26 #define IMR_TXFOVW BIT15
@@ -192,29 +129,9 @@ enum _RTL8192Pci_HW {#define IMR_ROK BIT0 ISR = 0x0f8, TPPoll = 0x0fd, -#define TPPoll_BKQ BIT0 -#define TPPoll_BEQ BIT1 -#define TPPoll_VIQ BIT2 -#define TPPoll_VOQ BIT3 -#define TPPoll_BQ BIT4#define TPPoll_CQ BIT5 -#define TPPoll_MQ BIT6 -#define TPPoll_HQ BIT7 -#define TPPoll_HCCAQ BIT8 -#define TPPoll_StopBK BIT9 -#define TPPoll_StopBE BIT10 -#define TPPoll_StopVI BIT11 -#define TPPoll_StopVO BIT12 -#define TPPoll_StopMgt BIT13 -#define TPPoll_StopHigh BIT14 -#define TPPoll_StopHCCA BIT15 -#define TPPoll_SHIFT 8 - PSR = 0x0ff, -#define PSR_GEN 0x0 -#define PSR_CPU 0x1 CPU_GEN = 0x100, - BB_RESET = 0x101,#define CPU_CCK_LOOPBACK 0x00030000#define CPU_GEN_SYSTEM_RESET 0x00000001#define CPU_GEN_FIRMWARE_RESET 0x00000008
@@ -225,31 +142,13 @@ enum _RTL8192Pci_HW {#define CPU_GEN_PWR_STB_CPU 0x00000004#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 -#define CPU_GEN_GPIO_UART 0x00007000 - - LED1Cfg = 0x154, - LED0Cfg = 0x155, - - AcmAvg = 0x170, AcmHwCtrl = 0x171, -#define AcmHw_HwEn BIT0#define AcmHw_BeqEn BIT1#define AcmHw_ViqEn BIT2#define AcmHw_VoqEn BIT3 -#define AcmHw_BeqStatus BIT4 -#define AcmHw_ViqStatus BIT5 -#define AcmHw_VoqStatus BIT6 - AcmFwCtrl = 0x172, -#define AcmFw_BeqStatus BIT0 -#define AcmFw_ViqStatus BIT1 -#define AcmFw_VoqStatus BIT2 - VOAdmTime =0x174 , - VIAdmTime =0x178 , - BEAdmTime =0x17C ,RQPN1 =0x180 ,RQPN2 =0x184 ,RQPN3 =0x188 , -QPRR =0x1E0 ,QPNR =0x1F0 ,BQDA =0x200 , HQDA = 0x204,
@@ -260,40 +159,13 @@ enum _RTL8192Pci_HW {VIQDA =0x218 ,BEQDA =0x21C ,BKQDA =0x220 , -RCQDA =0x224 ,RDQDA =0x228 , -MAR0 =0x240 , -MAR4 =0x244 , - -CCX_PERIOD =0x250 , -CLM_RESULT =0x251 , -NHM_PERIOD =0x252 , - -NHM_THRESHOLD0 =0x253 , -NHM_THRESHOLD1 =0x254 , -NHM_THRESHOLD2 =0x255 , -NHM_THRESHOLD3 =0x256 , -NHM_THRESHOLD4 =0x257 , -NHM_THRESHOLD5 =0x258 , -NHM_THRESHOLD6 =0x259 , - -MCTRL =0x25A , - -NHM_RPI_COUNTER0 =0x264 , -NHM_RPI_COUNTER1 =0x265 , -NHM_RPI_COUNTER2 =0x266 , -NHM_RPI_COUNTER3 =0x267 , -NHM_RPI_COUNTER4 =0x268 , -NHM_RPI_COUNTER5 =0x269 , -NHM_RPI_COUNTER6 =0x26A , -NHM_RPI_COUNTER7 =0x26B ,WFCRC0 =0x2f0 ,WFCRC1 =0x2f4 ,WFCRC2 =0x2f8 ,BW_OPMODE =0x300 , -#define BW_OPMODE_11J BIT0 #define BW_OPMODE_5G BIT1 #define BW_OPMODE_20MHZ BIT2 IC_VERRSION = 0x301,
@@ -304,7 +176,6 @@ enum _RTL8192Pci_HW {#define MSR_LINK_SHIFT 0#define MSR_LINK_ADHOC 1#define MSR_LINK_MASTER 3 -#define MSR_LINK_ENEDCA (1<<4)#define MSR_NOLINK 0x00#define MSR_ADHOC 0x01
@@ -316,12 +187,7 @@ enum _RTL8192Pci_HW {#define RETRY_LIMIT_LONG_SHIFT 0 TSFR = 0x308, RRSR = 0x310, -#define RRSR_RSC_OFFSET 21#define RRSR_SHORT_OFFSET 23 -#define RRSR_RSC_DUPLICATE 0x600000 -#define RRSR_RSC_UPSUBCHNL 0x400000 -#define RRSR_RSC_LOWSUBCHNL 0x200000 -#define RRSR_SHORT 0x800000#define RRSR_1M BIT0#define RRSR_2M BIT1#define RRSR_5_5M BIT2
@@ -334,14 +200,6 @@ enum _RTL8192Pci_HW {#define RRSR_36M BIT9#define RRSR_48M BIT10#define RRSR_54M BIT11 -#define RRSR_MCS0 BIT12 -#define RRSR_MCS1 BIT13 -#define RRSR_MCS2 BIT14 -#define RRSR_MCS3 BIT15 -#define RRSR_MCS4 BIT16 -#define RRSR_MCS5 BIT17 -#define RRSR_MCS6 BIT18 -#define RRSR_MCS7 BIT19#define BRSR_AckShortPmb BIT23UFWP =0x318 , RATR0 = 0x320,
@@ -393,10 +251,6 @@ enum _RTL8192Pci_HW { ;#define GPI 0x108 -#define GPO 0x109 -#define GPE 0x10a - -#define HWSET_MAX_SIZE_92S 128#define ANAPAR_FOR_8192PciE 0x17
Signature · 1 line
2.39.1
PATCH 8/10 staging: rtl8192e: Remove used constants MSR_LINK_SH.. and MSR_LINK_N..
In reply to Philipp HortmannRemove used constants MSR_LINK_SHIFT = 0 and MSR_LINK_NONE = 0. Use rules a << 0 = a, 0 << 0 = 0 and msr | 0 = msr to remove dead code.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 12 +++--------- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 2 -- 2 files changed, 3 insertions(+), 11 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +3 -9
@@ -54,22 +54,16 @@ static void _rtl92e_update_msr(struct net_device *dev)switch (priv->rtllib->iw_mode) {case IW_MODE_INFRA :if (priv->rtllib->state ==RTLLIB_LINKED ) - msr |= (MSR_LINK_MANAGED <<MSR_LINK_SHIFT ); -else - msr |= (MSR_LINK_NONE <<MSR_LINK_SHIFT ); + msr |=MSR_LINK_MANAGED ; LedAction =LED_CTL_LINK ;break ;case IW_MODE_ADHOC :if (priv->rtllib->state ==RTLLIB_LINKED ) - msr |= (MSR_LINK_ADHOC <<MSR_LINK_SHIFT ); -else - msr |= (MSR_LINK_NONE <<MSR_LINK_SHIFT ); + msr |=MSR_LINK_ADHOC ;break ;case IW_MODE_MASTER :if (priv->rtllib->state ==RTLLIB_LINKED ) - msr |= (MSR_LINK_MASTER <<MSR_LINK_SHIFT ); -else - msr |= (MSR_LINK_NONE <<MSR_LINK_SHIFT ); + msr |=MSR_LINK_MASTER ;break ;default :break ;
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h +0 -2
@@ -172,8 +172,6 @@ enum _RTL8192Pci_HW { MSR = 0x303,#define MSR_LINK_MASK ((1<<0)|(1<<1))#define MSR_LINK_MANAGED 2 -#define MSR_LINK_NONE 0 -#define MSR_LINK_SHIFT 0#define MSR_LINK_ADHOC 1#define MSR_LINK_MASTER 3
Signature · 1 line
2.39.1
PATCH 9/10 staging: rtl8192e: Rename _RTL8192Pci_HW, MXDMA2_NoLimit and TPPoll
In reply to Philipp HortmannRename enum _RTL8192Pci_HW to _RTL8192PCI_HW and variable MXDMA2_NoLimit to MXDMA2_NO_LIMIT and TPPoll to TP_POLL to avoid CamelCase which is not accepted by checkpatch.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c | 2 +- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 4 ++-- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 6 +++--- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c +1 -1
@@ -76,7 +76,7 @@ bool rtl92e_send_cmd_pkt(struct net_device *dev, u32 type, const void *data, }while (frag_offset < len); -rtl92e_writeb (dev, TPPoll, TPPoll_CQ); +rtl92e_writeb (dev,TP_POLL , TPPoll_CQ); Failed:return rt_status; }
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +2 -2
@@ -629,8 +629,8 @@ bool rtl92e_start_adapter(struct net_device *dev)_rtl92e_hwconfig (dev);rtl92e_writeb (dev,CMDR ,CR_RE |CR_TE ); -rtl92e_writeb (dev,PCIF , ((MXDMA2_NoLimit<<MXDMA2_RX_SHIFT ) | - (MXDMA2_NoLimit<<MXDMA2_TX_SHIFT ))); +rtl92e_writeb (dev,PCIF , ((MXDMA2_NO_LIMIT <<MXDMA2_RX_SHIFT ) | + (MXDMA2_NO_LIMIT <<MXDMA2_TX_SHIFT )));rtl92e_writel (dev,MAC0 , ((u32 *)dev->dev_addr)[0 ]);rtl92e_writew (dev,MAC4 , ((u16 *)(dev->dev_addr +4 ))[0 ]);rtl92e_writel (dev,RCR , priv->receive_config);
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h +3 -3
@@ -39,11 +39,11 @@ enum baseband_config {#define EEPROM_CID_Pronet 0x7#define EEPROM_CID_DLINK 0x8#define EEPROM_CID_WHQL 0xFE -enum _RTL8192Pci_HW { +enum _RTL8192PCI_HW {MAC0 =0x000 ,MAC4 =0x004 ,PCIF =0x009 , -#define MXDMA2_NoLimit 0x7 +#define MXDMA2_NO_LIMIT 0x7 #define MXDMA2_RX_SHIFT 4 #define MXDMA2_TX_SHIFT 0
@@ -128,7 +128,7 @@ enum _RTL8192Pci_HW {#define IMR_VODOK BIT1#define IMR_ROK BIT0 ISR = 0x0f8, - TPPoll = 0x0fd, + TP_POLL = 0x0fd,#define TPPoll_CQ BIT5PSR =0x0ff , CPU_GEN = 0x100,
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -1
@@ -1646,7 +1646,7 @@ static short _rtl92e_tx(struct net_device *dev, struct sk_buff *skb)spin_unlock_irqrestore (&priv->irq_th_lock, flags);netif_trans_update (dev); -rtl92e_writew (dev, TPPoll,0x01 << tcb_desc->queue_index); +rtl92e_writew (dev,TP_POLL ,0x01 << tcb_desc->queue_index);return 0 ; }
Signature · 1 line
2.39.1
PATCH 10/10 staging: rtl8192e: Rename TPPoll_CQ, AcmHwCtrl and AcmHw_BeqEn
In reply to Philipp HortmannRename variable TPPoll_CQ to TP_POLL_CQ and AcmHwCtrl to ACM_HW_CTRL and AcmHw_BeqEn to ACM_HW_BEQ_EN to avoid CamelCase which is not accepted by checkpatch.
Signed-off-by Philipp Hortmann <[email protected]>
--- drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c | 2 +- drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 10 +++++----- drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8192e/rtl8192e/r8192E_cmdpkt.c +1 -1
@@ -76,7 +76,7 @@ bool rtl92e_send_cmd_pkt(struct net_device *dev, u32 type, const void *data, }while (frag_offset < len); -rtl92e_writeb (dev,TP_POLL , TPPoll_CQ); +rtl92e_writeb (dev,TP_POLL ,TP_POLL_CQ ); Failed:return rt_status; }
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c +5 -5
@@ -216,12 +216,12 @@ void rtl92e_set_reg(struct net_device *dev, u8 variable, u8 *val)union aci_aifsn *pAciAifsn = (union aci_aifsn *)& (qos_parameters->aifs[0 ]);u8 acm = pAciAifsn->f.acm; -u8 AcmCtrl =rtl92e_readb (dev, AcmHwCtrl); +u8 AcmCtrl =rtl92e_readb (dev,ACM_HW_CTRL );if (acm) {switch (eACI) {case AC0_BE : - AcmCtrl |= AcmHw_BeqEn; + AcmCtrl |=ACM_HW_BEQ_EN ;break ;case AC2_VI :
@@ -235,7 +235,7 @@ void rtl92e_set_reg(struct net_device *dev, u8 variable, u8 *val) }else {switch (eACI) {case AC0_BE : - AcmCtrl &= (~AcmHw_BeqEn); + AcmCtrl &= (~ACM_HW_BEQ_EN );break ;case AC2_VI :
@@ -243,14 +243,14 @@ void rtl92e_set_reg(struct net_device *dev, u8 variable, u8 *val)break ;case AC3_VO : - AcmCtrl &= (~AcmHw_BeqEn); + AcmCtrl &= (~ACM_HW_BEQ_EN );break ;default :break ; } } -rtl92e_writeb (dev, AcmHwCtrl, AcmCtrl); +rtl92e_writeb (dev,ACM_HW_CTRL , AcmCtrl);break ; }
drivers/staging/rtl8192e/rtl8192e/r8192E_hw.h +3 -3
@@ -129,7 +129,7 @@ enum _RTL8192PCI_HW {#define IMR_ROK BIT0 ISR = 0x0f8, TP_POLL = 0x0fd, -#define TPPoll_CQ BIT5 +#define TP_POLL_CQ BIT5 PSR = 0x0ff, CPU_GEN = 0x100,#define CPU_CCK_LOOPBACK 0x00030000
@@ -142,8 +142,8 @@ enum _RTL8192PCI_HW {#define CPU_GEN_PWR_STB_CPU 0x00000004#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 - AcmHwCtrl = 0x171, -#define AcmHw_BeqEn BIT1 + ACM_HW_CTRL = 0x171, +#define ACM_HW_BEQ_EN BIT1#define AcmHw_ViqEn BIT2#define AcmHw_VoqEn BIT3 RQPN1 = 0x180,
Signature · 1 line
2.39.1