Add IO page table replacement support
Subsystems (5)
PATCH v4 1/5 vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
In reply to Nicolin ChenA driver that doesn't implement ops->dma_unmap shouldn't be allowed to do vfio_pin/unpin_pages(), though it can use vfio_dma_rw() to access an iova range. Deny !ops->dma_unmap cases in vfio_pin/unpin_pages().
--- drivers/vfio/vfio_main.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/vfio/vfio_main.c +4 -0
@@ -1522,6 +1522,8 @@ int vfio_pin_pages(struct vfio_device *device, dma_addr_t iova,/* group->container cannot change while a vfio device is open */ if (!pages || !npage ||WARN_ON (!vfio_assert_device_open (device)))return -EINVAL ; +if (!device->ops->dma_unmap) +return -EINVAL ;if (vfio_device_has_container (device))return vfio_device_container_pin_pages (device, iova, npage, prot, pages);
@@ -1559,6 +1561,8 @@ void vfio_unpin_pages(struct vfio_device *device, dma_addr_t iova, int npage) {if (WARN_ON (!vfio_assert_device_open (device)))return ; +if (WARN_ON (!device->ops->dma_unmap)) +return ;if (vfio_device_has_container (device)) {vfio_device_container_unpin_pages (device, iova, npage);
Signature · 1 line
2.39.2
v4 cover Add IO page table replacement support
Changelog
v4:
* Rebased on top of Jason's series adding replace() and hwpt_alloc()
https://lore.kernel.org/linux-iommu/[email protected]/
* Rebased on top of cdev series v6
https://lore.kernel.org/kvm/[email protected]/
* Dropped the patch that's moved to cdev series.
* Added unmap function pointer sanity before calling it.
* Added "Reviewed-by" from Kevin and Yi.
* Added back the VFIO change updating the ATTACH uAPI.
v3:
https://lore.kernel.org/linux-iommu/[email protected]/
* Rebased on top of Jason's iommufd_hwpt branch:
https://lore.kernel.org/linux-iommu/[email protected]/
* Dropped patches from this series accordingly. There were a couple of VFIO patches that will be submitted after the VFIO cdev series. Also, renamed the series to be "emulated".
* Moved dma_unmap sanity patch to the first in the series.
* Moved dma_unmap sanity to cover both VFIO and IOMMUFD pathways.
* Added Kevin's "Reviewed-by" to two of the patches.
* Fixed a NULL pointer bug in vfio_iommufd_emulated_bind().
* Moved unmap() call to the common place in iommufd_access_set_ioas().
v2:
https://lore.kernel.org/linux-iommu/[email protected]/
* Rebased on top of vfio_device cdev v2 series.
* Update the kdoc and commit message of iommu_group_replace_domain().
* Dropped revert-to-core-domain part in iommu_group_replace_domain().
* Dropped !ops->dma_unmap check in vfio_iommufd_emulated_attach_ioas().
* Added missing rc value in vfio_iommufd_emulated_attach_ioas() from the iommufd_access_set_ioas() call.
* Added a new patch in vfio_main to deny vfio_pin/unpin_pages() calls if vdev->ops->dma_unmap is not implemented.
* Added a __iommmufd_device_detach helper and let the replace routine do a partial detach().
* Added restriction on auto_domains to use the replace feature.
* Added the patch "iommufd/device: Make hwpt_list list_add/del symmetric" from the has_group removal series.
v1:
https://lore.kernel.org/linux-iommu/[email protected]/
Hi all,
The existing IOMMU APIs provide a pair of functions: iommu_attach_group() for callers to attach a device from the default_domain (NULL if not being supported) to a given iommu domain, and iommu_detach_group() for callers to detach a device from a given domain to the default_domain. Internally, the detach_dev op is deprecated for the newer drivers with default_domain. This means that those drivers likely can switch an attaching domain to another one, without stagging the device at a blocking or default domain, for use cases such as:
1) vPASID mode, when a guest wants to replace a single pasid (PASID=0) table with a larger table (PASID=N)
2) Nesting mode, when switching the attaching device from an S2 domain to an S1 domain, or when switching between relevant S1 domains.
This series is rebased on top of Jason Gunthorpe's series that introduces iommu_group_replace_domain API and IOMMUFD infrastructure for the IOMMUFD "physical" devices. The IOMMUFD "emulated" deivces will need some extra steps to replace the access->ioas object and its iopt pointer.
You can also find this series on Github:
https://github.com/nicolinc/iommufd/commits/iommu_group_replace_domain-v4
Thank you
Nicolin Chen
Nicolin Chen (5):
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages() iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_SET_IOAS coverage
iommufd: Add replace support in iommufd_access_set_ioas() iommufd/selftest: Add coverage for access->ioas replacement
vfio: Support IO page table replacement
drivers/iommu/iommufd/device.c | 17 +++++++++-- drivers/iommu/iommufd/iommufd_private.h | 1 + drivers/iommu/iommufd/iommufd_test.h | 4 +++ drivers/iommu/iommufd/selftest.c | 26 +++++++++++++---- drivers/vfio/iommufd.c | 6 ++-- drivers/vfio/vfio_main.c | 4 +++ include/uapi/linux/vfio.h | 6 ++++ tools/testing/selftests/iommu/iommufd.c | 29 +++++++++++++++++-- tools/testing/selftests/iommu/iommufd_utils.h | 22 ++++++++++++-- 9 files changed, 101 insertions(+), 14 deletions(-)
Signature · 1 line
2.39.2
PATCH v4 3/5 iommufd: Add replace support in iommufd_access_set_ioas()
Support an access->ioas replacement in iommufd_access_set_ioas(), which sets the access->ioas to NULL provisionally so that any further incoming iommufd_access_pin_pages() callback can be blocked.
Then, call access->ops->unmap() to clean up the entire iopt. To allow an iommufd_access_unpin_pages() callback to happen via this unmap() call, add an ioas_unpin pointer so the unpin routine won't be affected by the "access->ioas = NULL" trick above.
--- drivers/iommu/iommufd/device.c | 17 +++++++++++++++-- drivers/iommu/iommufd/iommufd_private.h | 1 + 2 files changed, 16 insertions(+), 2 deletions(-)
drivers/iommu/iommufd/device.c +15 -2
@@ -727,11 +727,24 @@ int iommufd_access_set_ioas(struct iommufd_access *access, u32 ioas_id)iommufd_ref_to_users (obj); } +/* +* Set ioas to NULL to block any further iommufd_access_pin_pages(). +* iommufd_access_unpin_pages() can continue using access->ioas_unpin. +*/ + access->ioas =NULL ; + +if (access->ops->unmap) { +mutex_unlock (&access->ioas_lock); + access->ops->unmap (access->data,0 ,ULONG_MAX ); +mutex_lock (&access->ioas_lock); + } +if (cur_ioas) {iopt_remove_access (&cur_ioas->iopt, access);refcount_dec (&cur_ioas->obj.users); } + access->ioas_unpin = new_ioas; access->ioas = new_ioas;mutex_unlock (&access->ioas_lock);
@@ -805,11 +818,11 @@ void iommufd_access_unpin_pages(struct iommufd_access *access,return ;mutex_lock (&access->ioas_lock); -if (!access->ioas) { +if (!access->ioas_unpin) {mutex_unlock (&access->ioas_lock);return ; } - iopt = &access->ioas->iopt; + iopt = &access->ioas_unpin->iopt;down_read (&iopt->iova_rwsem);iopt_for_each_contig_area (&iter, area, iopt, iova, last_iova)
drivers/iommu/iommufd/iommufd_private.h +1 -0
@@ -312,6 +312,7 @@ struct iommufd_access {struct iommufd_object obj;struct iommufd_ctx *ictx;struct iommufd_ioas *ioas; +struct iommufd_ioas *ioas_unpin;struct mutex ioas_lock;const struct iommufd_access_ops *ops;void *data;
Signature · 1 line
2.39.2
PATCH v4 2/5 iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_SET_IOAS coverage
In reply to Nicolin ChenAdd a new IOMMU_TEST_OP_ACCESS_SET_IOAS to allow setting access->ioas individually, corresponding to the iommufd_access_set_ioas() helper.
--- drivers/iommu/iommufd/iommufd_test.h | 4 +++ drivers/iommu/iommufd/selftest.c | 26 +++++++++++++++---- tools/testing/selftests/iommu/iommufd_utils.h | 22 ++++++++++++++-- 3 files changed, 45 insertions(+), 7 deletions(-)
drivers/iommu/iommufd/iommufd_test.h +4 -0
@@ -18,6 +18,7 @@ enum {IOMMU_TEST_OP_ACCESS_RW ,IOMMU_TEST_OP_SET_TEMP_MEMORY_LIMIT ,IOMMU_TEST_OP_MOCK_DOMAIN_REPLACE , + IOMMU_TEST_OP_ACCESS_SET_IOAS, }; enum {
@@ -91,6 +92,9 @@ struct iommu_test_cmd {struct {__u32 limit; } memory_limit; +struct { +__u32 ioas_id; + } access_set_ioas; };__u32 last; };
drivers/iommu/iommufd/selftest.c +21 -5
@@ -732,7 +732,7 @@ static struct selftest_access *iommufd_test_alloc_access(void) }static int iommufd_test_create_access (struct iommufd_ucmd *ucmd, -unsigned int ioas_id,unsigned int flags) +unsigned int flags) {struct iommu_test_cmd *cmd = ucmd->cmd;struct selftest_access *staccess;
@@ -764,9 +764,6 @@ static int iommufd_test_create_access(struct iommufd_ucmd *ucmd, rc =PTR_ERR (access); goto out_put_fdno; } - rc =iommufd_access_set_ioas (access, ioas_id); -if (rc) - goto out_destroy; cmd->create_access.out_access_fd = fdno; rc =iommufd_ucmd_respond (ucmd,sizeof (*cmd));if (rc)
@@ -785,6 +782,22 @@ static int iommufd_test_create_access(struct iommufd_ucmd *ucmd,return rc; } +static int iommufd_test_access_set_ioas (struct iommufd_ucmd *ucmd, +unsigned int access_id, +unsigned int ioas_id) +{ +struct selftest_access *staccess; +int rc; + + staccess =iommufd_access_get (access_id); +if (IS_ERR (staccess)) +return PTR_ERR (staccess); + + rc =iommufd_access_set_ioas (staccess->access, ioas_id); +fput (staccess->file); +return rc; +} +/* Check that the pages in a page array match the pages in the user VA */ static int iommufd_test_check_pages (void __user *uptr,struct page **pages,size_t npages)
@@ -998,8 +1011,11 @@ int iommufd_test(struct iommufd_ucmd *ucmd) ucmd,u64_to_user_ptr (cmd->check_refs.uptr), cmd->check_refs.length, cmd->check_refs.refs);case IOMMU_TEST_OP_CREATE_ACCESS : -return iommufd_test_create_access (ucmd, cmd->id, +return iommufd_test_create_access (ucmd, cmd->create_access.flags); +case IOMMU_TEST_OP_ACCESS_SET_IOAS : +return iommufd_test_access_set_ioas ( + ucmd, cmd->id, cmd->access_set_ioas.ioas_id);case IOMMU_TEST_OP_ACCESS_PAGES : return iommufd_test_access_pages( ucmd, cmd->id, cmd->access_pages.iova,
tools/testing/selftests/iommu/iommufd_utils.h +20 -2
@@ -117,13 +117,31 @@ static int _test_cmd_hwpt_alloc(int fd, __u32 device_id, __u32 pt_id,#define test_cmd_hwpt_alloc (device_id, pt_id, hwpt_id) \ ASSERT_EQ(0, _test_cmd_hwpt_alloc(self->fd, device_id, pt_id, hwpt_id)) +static int _test_cmd_access_set_ioas (int fd,__u32 access_id, +unsigned int ioas_id) +{ +struct iommu_test_cmd cmd = { + .size =sizeof (cmd), + .op =IOMMU_TEST_OP_ACCESS_SET_IOAS , + .id = access_id, + .access_set_ioas = { .ioas_id = ioas_id }, + }; +int ret; + + ret =ioctl (fd,IOMMU_TEST_CMD , &cmd); +if (ret) +return ret; +return 0 ; +} +#define test_cmd_access_set_ioas (access_id, ioas_id) \ + ASSERT_EQ(0, _test_cmd_access_set_ioas(self->fd, access_id, ioas_id)) +static int _test_cmd_create_access (int fd,unsigned int ioas_id,__u32 *access_id,unsigned int flags) {struct iommu_test_cmd cmd = { .size =sizeof (cmd), .op =IOMMU_TEST_OP_CREATE_ACCESS , - .id = ioas_id, .create_access = { .flags = flags }, };int ret;
@@ -132,7 +150,7 @@ static int _test_cmd_create_access(int fd, unsigned int ioas_id,if (ret)return ret; *access_id = cmd.create_access.out_access_fd; -return 0 ; +return _test_cmd_access_set_ioas (fd, *access_id, ioas_id); }#define test_cmd_create_access (ioas_id, access_id, flags) \ ASSERT_EQ(0, _test_cmd_create_access(self->fd, ioas_id, access_id, \
Signature · 1 line
2.39.2
PATCH v4 5/5 vfio: Support IO page table replacement
In reply to Nicolin ChenNow both the physical path and the emulated path should support an IO page table replacement.
Call iommufd_device_replace() when vdev->iommufd_attached is true.
Also update the VFIO_DEVICE_ATTACH_IOMMUFD_PT kdoc in the uAPI header.
--- drivers/vfio/iommufd.c | 6 +++--- include/uapi/linux/vfio.h | 6 ++++++ 2 files changed, 9 insertions(+), 3 deletions(-)
drivers/vfio/iommufd.c +3 -3
@@ -145,9 +145,9 @@ int vfio_iommufd_physical_attach_ioas(struct vfio_device *vdev, u32 *pt_id)return -EINVAL ;if (vdev->iommufd_attached) -return -EBUSY ; - - rc =iommufd_device_attach (vdev->iommufd_device, pt_id); + rc =iommufd_device_replace (vdev->iommufd_device, pt_id); +else + rc =iommufd_device_attach (vdev->iommufd_device, pt_id);if (rc)return rc; vdev->iommufd_attached = true;
include/uapi/linux/vfio.h +6 -0
@@ -243,6 +243,12 @@ struct vfio_device_bind_iommufd {* * Undo by VFIO_DEVICE_DETACH_IOMMUFD_PT or device fd close. * +* If a vfio device is currently attached to a valid hw_pagetable, without doing +* a VFIO_DEVICE_DETACH_IOMMUFD_PT, a second VFIO_DEVICE_ATTACH_IOMMUFD_PT ioctl +* passing in another hw_pagetable (hwpt) id is allowed. This action, also known +* as a hw_pagetable replacement, will replace the device's currently attached +* hw_pagetable with a new hw_pagetable corresponding to the given pt_id. +* * @argsz: user filled size of this data. * @flags: must be 0. * @pt_id: Input the target id which can represent an ioas or a hwpt
Signature · 1 line
2.39.2
PATCH v4 4/5 iommufd/selftest: Add coverage for access->ioas replacement
In reply to Nicolin ChenAdd replace coverage as a part of user_copy test case. It basically repeats the copy test after replacing the old ioas with a new one.
--- tools/testing/selftests/iommu/iommufd.c | 29 +++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-)
tools/testing/selftests/iommu/iommufd.c +27 -2
@@ -1252,7 +1252,13 @@ TEST_F(iommufd_mock_domain, user_copy) .dst_iova = MOCK_APERTURE_START, .length = BUFFER_SIZE, }; -unsigned int ioas_id; +struct iommu_ioas_unmap unmap_cmd = { + .size =sizeof (unmap_cmd), + .ioas_id = self->ioas_id, + .iova =MOCK_APERTURE_START , + .length =BUFFER_SIZE , + }; +unsigned int new_ioas_id, ioas_id;/* Pin the pages in an IOAS with no domains then copy to an IOAS with domains */ test_ioctl_ioas_alloc (&ioas_id);
@@ -1270,11 +1276,30 @@ TEST_F(iommufd_mock_domain, user_copy)ASSERT_EQ (0 ,ioctl (self->fd,IOMMU_IOAS_COPY , ©_cmd));check_mock_iova (buffer,MOCK_APERTURE_START ,BUFFER_SIZE ); +/* Now replace the ioas with a new one */ +test_ioctl_ioas_alloc (&new_ioas_id); +test_ioctl_ioas_map_id (new_ioas_id, buffer,BUFFER_SIZE , + ©_cmd.src_iova); +test_cmd_access_set_ioas (access_cmd.id, new_ioas_id); + +/* Destroy the old ioas and cleanup copied mapping */ +ASSERT_EQ (0 ,ioctl (self->fd,IOMMU_IOAS_UNMAP , &unmap_cmd)); +test_ioctl_destroy (ioas_id); + +/* Then run the same test again with the new ioas */ + access_cmd.access_pages.iova = copy_cmd.src_iova; +ASSERT_EQ (0 , +ioctl (self->fd,_IOMMU_TEST_CMD (IOMMU_TEST_OP_ACCESS_PAGES ), + &access_cmd)); + copy_cmd.src_ioas_id = new_ioas_id; +ASSERT_EQ (0 ,ioctl (self->fd,IOMMU_IOAS_COPY , ©_cmd)); +check_mock_iova (buffer,MOCK_APERTURE_START ,BUFFER_SIZE ); +test_cmd_destroy_access_pages ( access_cmd.id, access_cmd.access_pages.out_access_pages_id);test_cmd_destroy_access (access_cmd.id); -test_ioctl_destroy (ioas_id); +test_ioctl_destroy (new_ioas_id); }TEST_F (iommufd_mock_domain, replace)
Signature · 1 line
2.39.2
RE: [PATCH v4 3/5] iommufd: Add replace support in iommufd_access_set_ioas()
In reply to Nicolin ChenQuoted 7 lines
From: Nicolin Chen <[email protected]>
Sent: Wednesday, March 8, 2023 10:26 PMSupport an
access->ioasreplacement iniommufd_access_set_ioas(), which sets theaccess->ioasto NULL provisionally so that any further incomingiommufd_access_pin_pages()callback can be blocked.
Quoted 7 lines
Then, call
access->ops->unmap()to clean up the entire iopt. To allow aniommufd_access_unpin_pages()callback to happen via thisunmap()call, add anioas_unpinpointer so the unpin routine won't be affected by the "access->ioas= NULL" trick above.Suggested-by Jason Gunthorpe <[email protected]>Signed-off-by Nicolin Chen <[email protected]>
Tian, Kevin
maintainerRE: [PATCH v4 5/5] vfio: Support IO page table replacement
In reply to Nicolin ChenQuoted 9 lines
From: Nicolin Chen <[email protected]>
Sent: Wednesday, March 8, 2023 10:26 PMNow both the physical path and the emulated path should support an IO page
table replacement.Call
iommufd_device_replace()whenvdev->iommufd_attachedis true.
why is replace enabled only in physical path in this patch?
Re: [PATCH v4 1/5] vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
In reply to Nicolin ChenQuoted 11 lines · Nicolin Chen
A driver that doesn't implement
ops->dma_unmapshouldn't be allowed to do vfio_pin/unpin_pages(), though it can usevfio_dma_rw()to access an iova range. Deny !ops->dma_unmap cases in vfio_pin/unpin_pages().Suggested-by Kevin Tian <[email protected]>Reviewed-by Kevin Tian <[email protected]>Reviewed-by Yi Liu <[email protected]>Signed-off-by Nicolin Chen <[email protected]>--- drivers/vfio/vfio_main.c | 4 ++++ 1 file changed, 4 insertions(+)
Jason
Jason Gunthorpe
maintainerRe: [PATCH v4 2/5] iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_SET_IOAS coverage
In reply to Nicolin ChenQuoted 10 lines · Nicolin Chen
Add a new
IOMMU_TEST_OP_ACCESS_SET_IOASto allow settingaccess->ioasindividually, corresponding to theiommufd_access_set_ioas()helper.Reviewed-by Kevin Tian <[email protected]>Signed-off-by Nicolin Chen <[email protected]>--- drivers/iommu/iommufd/iommufd_test.h | 4 +++ drivers/iommu/iommufd/selftest.c | 26 +++++++++++++++---- tools/testing/selftests/iommu/iommufd_utils.h | 22 ++++++++++++++-- 3 files changed, 45 insertions(+), 7 deletions(-)
I'd prefer we keep it so that the IOAS can be setup with an argument, this will greatly help syzkaller
Lets have it so a 0 ioas will avoid the setup so the second call can happen
Jason
Re: [PATCH v4 5/5] vfio: Support IO page table replacement
In reply to Tian, KevinQuoted 6 lines · Kevin
External email: Use caution opening links or attachments
Quoted 3 lines
From: Nicolin Chen <[email protected]>
Sent: Wednesday, March 8, 2023 10:26 PM
Quoted 8 lines
Quoted 6 lines
Now both the physical path and the emulated path should support an IO page
table replacement.Call
iommufd_device_replace()whenvdev->iommufd_attachedis true.why is replace enabled only in physical path in this patch?
The emulated pathway does not call iommufd_device_attach() but iommufd_access_set_ioas() in the other patch, which internally takes care of the replacement for the access pointer.
Thanks
Nic
Re: [PATCH v4 2/5] iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_SET_IOAS coverage
In reply to Jason GunthorpeQuoted 12 lines · Jason Gunthorpe
Quoted 10 lines · Nicolin Chen
Add a new
IOMMU_TEST_OP_ACCESS_SET_IOASto allow settingaccess->ioasindividually, corresponding to theiommufd_access_set_ioas()helper.Reviewed-by Kevin Tian <[email protected]>Signed-off-by Nicolin Chen <[email protected]>--- drivers/iommu/iommufd/iommufd_test.h | 4 +++ drivers/iommu/iommufd/selftest.c | 26 +++++++++++++++---- tools/testing/selftests/iommu/iommufd_utils.h | 22 ++++++++++++++-- 3 files changed, 45 insertions(+), 7 deletions(-)
Quoted 5 lines
I'd prefer we keep it so that the IOAS can be setup with an argument, this will greatly help syzkaller
Lets have it so a 0 ioas will avoid the setup so the second call can happen
I assume that you mean the iommufd_access_set_ioas() call and the "unsigned int ioas_id" input of iommufd_test_create_access?
Thanks
Nic
Tian, Kevin
maintainerRE: [PATCH v4 5/5] vfio: Support IO page table replacement
In reply to Nicolin ChenQuoted 14 lines
From: Nicolin Chen <[email protected]>
Sent: Saturday, March 11, 2023 7:38 AMQuoted 10 lines · Kevin
External email: Use caution opening links or attachments
Quoted 7 lines
From: Nicolin Chen <[email protected]>
Sent: Wednesday, March 8, 2023 10:26 PMNow both the physical path and the emulated path should support an IO page
table replacement.
Quoted 9 lines
Quoted 4 lines
Quoted 2 lines
Call
iommufd_device_replace()whenvdev->iommufd_attachedis true.why is replace enabled only in physical path in this patch?
The emulated pathway does not call
iommufd_device_attach()butiommufd_access_set_ioas()in the other patch, which internally takes care of the replacement for the access pointer.
I thought there is a similar check as in physical path which should be removed:
if (vdev->iommufd_attached)
- return -EBUSY;
but looks it's not the case for the emulated path.
Re: [PATCH v4 2/5] iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_SET_IOAS coverage
In reply to Nicolin ChenQuoted 13 lines · Nicolin Chen
Quoted 12 lines · Jason Gunthorpe
Quoted 10 lines · Nicolin Chen
Add a new
IOMMU_TEST_OP_ACCESS_SET_IOASto allow settingaccess->ioasindividually, corresponding to theiommufd_access_set_ioas()helper.Reviewed-by Kevin Tian <[email protected]>Signed-off-by Nicolin Chen <[email protected]>--- drivers/iommu/iommufd/iommufd_test.h | 4 +++ drivers/iommu/iommufd/selftest.c | 26 +++++++++++++++---- tools/testing/selftests/iommu/iommufd_utils.h | 22 ++++++++++++++-- 3 files changed, 45 insertions(+), 7 deletions(-)
Quoted 8 lines
Quoted 5 lines
I'd prefer we keep it so that the IOAS can be setup with an argument, this will greatly help syzkaller
Lets have it so a 0 ioas will avoid the setup so the second call can happen
I assume that you mean the
iommufd_access_set_ioas()call and the "unsigned intioas_id" input ofiommufd_test_create_access?
I changed it to keep the id in iommufd_test_create_access(). Instead, I renamed the IOMMU_TEST_OP_ACCESS_SET_IOAS ioctl to IOMMU_TEST_OP_ACCESS_REPLACE_IOAS. So an access can be created by the original ioctl, and then be replaced using the new one.
Thanks
Nic