Fixes to mlx5 IPsec implementation

---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +1 -1

index 5fd609d1120e..1547d8cda133 100644
@@ -712,7 +712,7 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x,
 	kfree(sa_entry->work);
 err_xfrm:
 	kfree(sa_entry);
-	NL_SET_ERR_MSG_MOD(extack, "Device failed to offload this policy");
+	NL_SET_ERR_MSG_WEAK_MOD(extack, "Device failed to offload this state");
 	return err;
 }

Signature · 1 line

2.40.0

Leon Romanovsky

author

2023-04-20 08:03 UTC #5 lore raw

PATCH 3/5 net/mlx5e: Compare all fields in IPv6 address

From: Leon Romanovsky <[email protected]>

Fix size argument in memcmp to compare whole IPv6 address.

Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")

Reviewed-by Raed Salem <[email protected]>

Reviewed-by Emeel Hakim <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1

index f7f7c09d2b32..4e9887171508 100644
@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
 }
 #else
 static inline void mlx5e_ipsec_init(struct mlx5e_priv *priv)

Signature · 1 line

2.40.0

Leon Romanovsky

author

2023-04-20 08:03 UTC #12 lore raw

PATCH 4/5 net/mlx5e: Properly release work data structure

From: Leon Romanovsky <[email protected]>

There are some flows in which work structure is not allocated at all and it is needed to be checked prior release of data structure.

 general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN
 KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
 CPU: 6 PID: 3486 Comm: kworker/6:0 Not tainted 6.3.0-rc5_for_upstream_debug_2023_04_06_11_01 #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: events xfrm_state_gc_task
 RIP: 0010:mlx5e_xfrm_free_state+0x177/0x260 [mlx5_core]
 Code: c1 ea 03 80 3c 02 00 0f 85 f5 00 00 00 4c 8b a5 08 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 50 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b7 00 00 00 49 8b 7c 24 50 e8 85 7c 09 e0 4c 89
 RSP: 0018:ffff888137a8fc50 EFLAGS: 00010206
 RAX: dffffc0000000000 RBX: ffff888180398000 RCX: 0000000000000000
 RDX: 000000000000000a RSI: ffffffffa1878227 RDI: 0000000000000050
 RBP: ffff88812a0c8000 R08: ffff888137a8fb60 R09: 0000000000000000
 R10: fffffbfff09aba0c R11: 0000000000000001 R12: 0000000000000000
 R13: ffff88812a0c8108 R14: ffffffff84c63480 R15: ffff8881acb63118
 FS:  0000000000000000(0000) GS:ffff88881eb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f667e8bc000 CR3: 0000000004693006 CR4: 0000000000370ea0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:

  ___xfrm_state_destroy+0x3c8/0x5e0
  xfrm_state_gc_task+0xf6/0x140
  ? ___xfrm_state_destroy+0x5e0/0x5e0
  process_one_work+0x7c2/0x1340
  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
  ? pwq_dec_nr_in_flight+0x230/0x230
  ? spin_bug+0x1d0/0x1d0
  worker_thread+0x59d/0xec0
  ? __kthread_parkme+0xd9/0x1d0
  ? process_one_work+0x1340/0x1340
  kthread+0x28f/0x330
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30

 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core vfio_pci vfio_pci_core vfio_iommu_type1 vfio cuse overlay zram zsmalloc fuse [last unloaded: mlx5_core]
 ---[ end trace 0000000000000000 ]---

Fixes 4562116f8a56 ("net/mlx5e: Generalize IPsec work structs")

---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +4 -2

index 1547d8cda133..59b9927ac90f 100644
@@ -708,7 +708,8 @@ static int mlx5e_xfrm_add_state(struct xfrm_state *x,
 release_dwork:
 	kfree(sa_entry->dwork);
 release_work:
-	kfree(sa_entry->work->data);
+	if (sa_entry->work)
+		kfree(sa_entry->work->data);
 	kfree(sa_entry->work);
 err_xfrm:
 	kfree(sa_entry);

@@ -752,7 +753,8 @@ static void mlx5e_xfrm_free_state(struct xfrm_state *x)
 	mlx5e_accel_ipsec_fs_del_rule(sa_entry);
 	mlx5_ipsec_free_sa_ctx(sa_entry);
 	kfree(sa_entry->dwork);
-	kfree(sa_entry->work->data);
+	if (sa_entry->work)
+		kfree(sa_entry->work->data);
 	kfree(sa_entry->work);
 sa_entry_free:
 	kfree(sa_entry);

Signature · 1 line

2.40.0

Leon Romanovsky

author

2023-04-20 08:03 UTC #1 lore raw

PATCH 1/5 net/mlx5e: Fix FW error while setting IPsec policy block action

From: Leon Romanovsky <[email protected]>

When trying to set IPsec policy block action the following error is generated:

mlx5_cmd_out_err:803:(pid 3426): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,

	status bad parameter(0x3), syndrome (0x8708c3), err(-22)

This error means that drop action is not allowed when modify action is set, so update the code to skip modify header for XFRM_POLICY_BLOCK action.

Fixes 6721239672fe ("net/mlx5e: Skip IPsec encryption for TX path without matching policy")

---
 .../mellanox/mlx5/core/en_accel/ipsec_fs.c       | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +8 -8

index 5a8fcd30fcb1..dbe87bf89c0d 100644
@@ -1252,16 +1252,16 @@ static int tx_add_policy(struct mlx5e_ipsec_pol_entry *pol_entry)
 	setup_fte_no_frags(spec);
 	setup_fte_upper_proto_match(spec, &attrs->upspec);
 
-	if (attrs->reqid) {
+	switch (attrs->action) {
+	case XFRM_POLICY_ALLOW:
+		flow_act.action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
+		if (!attrs->reqid)
+			break;
+
 		err = setup_modify_header(mdev, attrs->reqid,
 					  XFRM_DEV_OFFLOAD_OUT, &flow_act);
 		if (err)
 			goto err_mod_header;
-	}
-
-	switch (attrs->action) {
-	case XFRM_POLICY_ALLOW:
-		flow_act.action |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 		break;
 	case XFRM_POLICY_BLOCK:
 		flow_act.action |= MLX5_FLOW_CONTEXT_ACTION_DROP |

@@ -1273,7 +1273,7 @@ static int tx_add_policy(struct mlx5e_ipsec_pol_entry *pol_entry)
 	default:
 		WARN_ON(true);
 		err = -EINVAL;
-		goto err_action;
+		goto err_mod_header;
 	}
 
 	flow_act.flags |= FLOW_ACT_NO_APPEND;

@@ -1293,7 +1293,7 @@ static int tx_add_policy(struct mlx5e_ipsec_pol_entry *pol_entry)
 	return 0;
 
 err_action:
-	if (attrs->reqid)
+	if (flow_act.modify_hdr)
 		mlx5_modify_header_dealloc(mdev, flow_act.modify_hdr);
 err_mod_header:
 	kvfree(spec);

Signature · 1 line

2.40.0

Leon Romanovsky

author

2023-04-20 08:03 UTC #14 lore raw

PATCH 5/5 net/mlx5e: Refactor duplicated code in mlx5e_ipsec_init_macs

From: Leon Romanovsky <[email protected]>

ARP discovery code has same logic for RX and TX flows, but with different source and destination fields. Instead of duplicating same code in mlx5e_ipsec_init_macs, let's refactor.

---
 .../mellanox/mlx5/core/en_accel/ipsec.c       | 45 +++++++++----------
 1 file changed, 21 insertions(+), 24 deletions(-)

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +21 ~~-24~~

index 59b9927ac90f..55b38544422f 100644
@@ -252,6 +252,8 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,
 	struct net_device *netdev;
 	struct neighbour *n;
 	u8 addr[ETH_ALEN];
+	const void *pkey;
+	u8 *dst, *src;
 
 	if (attrs->mode != XFRM_MODE_TUNNEL ||
 	    attrs->type != XFRM_DEV_OFFLOAD_PACKET)

@@ -262,36 +264,31 @@ static void mlx5e_ipsec_init_macs(struct mlx5e_ipsec_sa_entry *sa_entry,
 	mlx5_query_mac_address(mdev, addr);
 	switch (attrs->dir) {
 	case XFRM_DEV_OFFLOAD_IN:
-		ether_addr_copy(attrs->dmac, addr);
-		n = neigh_lookup(&arp_tbl, &attrs->saddr.a4, netdev);
-		if (!n) {
-			n = neigh_create(&arp_tbl, &attrs->saddr.a4, netdev);
-			if (IS_ERR(n))
-				return;
-			neigh_event_send(n, NULL);
-			attrs->drop = true;
-			break;
-		}
-		neigh_ha_snapshot(addr, n, netdev);
-		ether_addr_copy(attrs->smac, addr);
+		src = attrs->dmac;
+		dst = attrs->smac;
+		pkey = &attrs->saddr.a4;
 		break;
 	case XFRM_DEV_OFFLOAD_OUT:
-		ether_addr_copy(attrs->smac, addr);
-		n = neigh_lookup(&arp_tbl, &attrs->daddr.a4, netdev);
-		if (!n) {
-			n = neigh_create(&arp_tbl, &attrs->daddr.a4, netdev);
-			if (IS_ERR(n))
-				return;
-			neigh_event_send(n, NULL);
-			attrs->drop = true;
-			break;
-		}
-		neigh_ha_snapshot(addr, n, netdev);
-		ether_addr_copy(attrs->dmac, addr);
+		src = attrs->smac;
+		dst = attrs->dmac;
+		pkey = &attrs->daddr.a4;
 		break;
 	default:
 		return;
 	}
+
+	ether_addr_copy(src, addr);
+	n = neigh_lookup(&arp_tbl, pkey, netdev);
+	if (!n) {
+		n = neigh_create(&arp_tbl, pkey, netdev);
+		if (IS_ERR(n))
+			return;
+		neigh_event_send(n, NULL);
+		attrs->drop = true;
+	} else {
+		neigh_ha_snapshot(addr, n, netdev);
+		ether_addr_copy(dst, addr);
+	}
 	neigh_release(n);
 }

Signature · 1 line

2.40.0

Simon Horman

2023-04-20 11:18 UTC #6 lore raw

Re: [PATCH net-next 3/5] net/mlx5e: Compare all fields in IPv6 address

Quoted 17 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>
Fix size argument in memcmp to compare whole IPv6 address.
Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by Raed Salem <[email protected]>
Reviewed-by Emeel Hakim <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
index f7f7c09d2b32..4e9887171508 100644

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h static inline bool addr6_all_zero(__be32 *addr6) · line 290

Quoted 5 lines

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1

@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));

1. Perhaps array_size() is appropriate here?
2. It's a shame that ipv6_addr_any() or some other common helper can't be used.

Quoted 6 lines

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
 }
 #else
 static inline void mlx5e_ipsec_init(struct mlx5e_priv *priv)
Signature · 1 line
2.40.0

Simon Horman

Reviewed-by on v1 5/5

2023-04-20 11:24 UTC #15 lore raw

Re: [PATCH net-next 5/5] net/mlx5e: Refactor duplicated code in mlx5e_ipsec_init_macs

Quoted 7 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>
ARP discovery code has same logic for RX and TX flows, but with different source and destination fields. Instead of duplicating same code in mlx5e_ipsec_init_macs, let's refactor.
Signed-off-by Leon Romanovsky <[email protected]>

Simon Horman

Reviewed-by on v1 1/5

2023-04-20 11:25 UTC #2 lore raw

Re: [PATCH net-next 1/5] net/mlx5e: Fix FW error while setting IPsec policy block action

Quoted 5 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>
When trying to set IPsec policy block action the following error is generated:

Quoted 8 lines

mlx5_cmd_out_err:803:(pid 3426): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed,
	status bad parameter(0x3), syndrome (0x8708c3), err(-22)
This error means that drop action is not allowed when modify action is set, so update the code to skip modify header for XFRM_POLICY_BLOCK action.
Fixes 6721239672fe ("net/mlx5e: Skip IPsec encryption for TX path without matching policy")
Signed-off-by Leon Romanovsky <[email protected]>

Simon Horman

Reviewed-by on v1 4/5

2023-04-20 11:25 UTC #13 lore raw

Re: [PATCH net-next 4/5] net/mlx5e: Properly release work data structure

Quoted 42 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>

There are some flows in which work structure is not allocated at all and it is needed to be checked prior release of data structure.

 general protection fault, probably for non-canonical address 0xdffffc000000000a: 0000 [#1] SMP KASAN
 KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057]
 CPU: 6 PID: 3486 Comm: kworker/6:0 Not tainted 6.3.0-rc5_for_upstream_debug_2023_04_06_11_01 #1
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 Workqueue: events xfrm_state_gc_task
 RIP: 0010:mlx5e_xfrm_free_state+0x177/0x260 [mlx5_core]
 Code: c1 ea 03 80 3c 02 00 0f 85 f5 00 00 00 4c 8b a5 08 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 50 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b7 00 00 00 49 8b 7c 24 50 e8 85 7c 09 e0 4c 89
 RSP: 0018:ffff888137a8fc50 EFLAGS: 00010206
 RAX: dffffc0000000000 RBX: ffff888180398000 RCX: 0000000000000000
 RDX: 000000000000000a RSI: ffffffffa1878227 RDI: 0000000000000050
 RBP: ffff88812a0c8000 R08: ffff888137a8fb60 R09: 0000000000000000
 R10: fffffbfff09aba0c R11: 0000000000000001 R12: 0000000000000000
 R13: ffff88812a0c8108 R14: ffffffff84c63480 R15: ffff8881acb63118
 FS:  0000000000000000(0000) GS:ffff88881eb00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f667e8bc000 CR3: 0000000004693006 CR4: 0000000000370ea0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:

  ___xfrm_state_destroy+0x3c8/0x5e0
  xfrm_state_gc_task+0xf6/0x140
  ? ___xfrm_state_destroy+0x5e0/0x5e0
  process_one_work+0x7c2/0x1340
  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
  ? pwq_dec_nr_in_flight+0x230/0x230
  ? spin_bug+0x1d0/0x1d0
  worker_thread+0x59d/0xec0
  ? __kthread_parkme+0xd9/0x1d0
  ? process_one_work+0x1340/0x1340
  kthread+0x28f/0x330
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30

 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm ib_uverbs ib_core vfio_pci vfio_pci_core vfio_iommu_type1 vfio cuse overlay zram zsmalloc fuse [last unloaded: mlx5_core]
 ---[ end trace 0000000000000000 ]---

Quoted 2 lines

Fixes 4562116f8a56 ("net/mlx5e: Generalize IPsec work structs")
Signed-off-by Leon Romanovsky <[email protected]>

Simon Horman

Reviewed-by on v1 2/5

2023-04-20 11:25 UTC #4 lore raw

Re: [PATCH net-next 2/5] net/mlx5e: Don't overwrite extack message returned from IPsec SA validator

Quoted 9 lines · Leon Romanovsky

From: Leon Romanovsky <[email protected]>
Addition of new err_xfrm label caused to error messages be overwritten. Fix it by using proper NL_SET_ERR_MSG_WEAK_MOD macro together with change in a default message.
Fixes aa8bd0c9518c ("net/mlx5e: Support IPsec acquire default SA")
Reviewed-by Raed Salem <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>

Leon Romanovsky

author

2023-04-20 11:52 UTC #7 lore raw

Re: [PATCH net-next 3/5] net/mlx5e: Compare all fields in IPv6 address

In reply to Simon Horman

Quoted 21 lines · Simon Horman

Quoted 20 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Fix size argument in memcmp to compare whole IPv6 address.
Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by Raed Salem <[email protected]>
Reviewed-by Emeel Hakim <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
index f7f7c09d2b32..4e9887171508 100644
@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 

Quoted 4 lines

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h static inline bool addr6_all_zero(__be32 *addr6) · line 290
Quoted 2 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
1. Perhaps array_size() is appropriate here?

It is overkill here, sizeof(zaddr6) is constant and can't overflow.

238 /**

  239  * array_size() - Calculate size of 2-dimensional array.
  240  * @a: dimension one
  241  * @b: dimension two
  242  *
  243  * Calculates size of 2-dimensional array: @a * @b.
  244  *
  245  * Returns: number of bytes needed to represent the array or SIZE_MAX on
  246  * overflow.
  247  */

248 #define array_size(a, b) size_mul(a, b)

Quoted 2 lines

2. It's a shame that ipv6_addr_any() or some other common helper can't be used.

I didn't use ipv6_addr_any() as it required from me to cast "__be32 *addr6" to be "struct in6_addr *" just to replace one line memcmp to another one line function.

Do you want me to post this code instead?

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +2 -1

index 55b38544422f..a7c8e38658a0 100644
@@ -945,7 +945,8 @@ static int mlx5e_xfrm_validate_policy(struct mlx5_core_dev *mdev,
 	}
 
 	if (!x->xfrm_vec[0].reqid && sel->proto == IPPROTO_IP &&
-	    addr6_all_zero(sel->saddr.a6) && addr6_all_zero(sel->daddr.a6)) {
+	    ipv6_addr_any((struct in6_addr *)sel->saddr.a6) &&
+	    ipv6_addr_any((struct in6_addr *)sel->daddr.a6)) {
 		NL_SET_ERR_MSG_MOD(extack, "Unsupported policy with reqid 0 without at least one of upper protocol or ip addr(s) different than 0");
 		return -EINVAL;
 	}

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -6

index 4e9887171508..097001ce5dc1 100644
@@ -283,12 +283,6 @@ mlx5e_ipsec_pol2dev(struct mlx5e_ipsec_pol_entry *pol_entry)
 	return pol_entry->ipsec->mdev;
 }
 
-static inline bool addr6_all_zero(__be32 *addr6)
-{
-	static const __be32 zaddr6[4] = {};
-
-	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
-}
 #else
 static inline void mlx5e_ipsec_init(struct mlx5e_priv *priv)
 {

drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c +4 -3

index dbe87bf89c0d..e48113923c12 100644
@@ -721,7 +721,8 @@ static void setup_fte_addr4(struct mlx5_flow_spec *spec, __be32 *saddr,
 static void setup_fte_addr6(struct mlx5_flow_spec *spec, __be32 *saddr,
 			    __be32 *daddr)
 {
-	if (addr6_all_zero(saddr) && addr6_all_zero(daddr))
+	if (ipv6_addr_any((struct in6_addr *)saddr) &&
+	    ipv6_addr_any((struct in6_addr *)daddr))
 		return;
 
 	spec->match_criteria_enable |= MLX5_MATCH_OUTER_HEADERS;

@@ -729,14 +730,14 @@ static void setup_fte_addr6(struct mlx5_flow_spec *spec, __be32 *saddr,
 	MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, outer_headers.ip_version);
 	MLX5_SET(fte_match_param, spec->match_value, outer_headers.ip_version, 6);
 
-	if (!addr6_all_zero(saddr)) {
+	if (!ipv6_addr_any((struct in6_addr *)saddr)) {
 		memcpy(MLX5_ADDR_OF(fte_match_param, spec->match_value,
 				    outer_headers.src_ipv4_src_ipv6.ipv6_layout.ipv6), saddr, 16);
 		memset(MLX5_ADDR_OF(fte_match_param, spec->match_criteria,
 				    outer_headers.src_ipv4_src_ipv6.ipv6_layout.ipv6), 0xff, 16);
 	}
 
-	if (!addr6_all_zero(daddr)) {
+	if (!ipv6_addr_any((struct in6_addr *)daddr)) {
 		memcpy(MLX5_ADDR_OF(fte_match_param, spec->match_value,
 				    outer_headers.dst_ipv4_dst_ipv6.ipv6_layout.ipv6), daddr, 16);
 		memset(MLX5_ADDR_OF(fte_match_param, spec->match_criteria,

Thanks

Quoted 7 lines

Quoted 7 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
 }
 #else
 static inline void mlx5e_ipsec_init(struct mlx5e_priv *priv)
Signature · 1 line
2.40.0

Simon Horman

Reviewed-by

2023-04-20 12:05 UTC #8 lore raw

Re: [PATCH net-next 3/5] net/mlx5e: Compare all fields in IPv6 address

Quoted 22 lines · Leon Romanovsky

Quoted 21 lines · Simon Horman
Quoted 20 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Fix size argument in memcmp to compare whole IPv6 address.
Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by Raed Salem <[email protected]>
Reviewed-by Emeel Hakim <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
index f7f7c09d2b32..4e9887171508 100644
@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 

Quoted 6 lines

Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h static inline bool addr6_all_zero(__be32 *addr6) · line 290
Quoted 2 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
1. Perhaps array_size() is appropriate here?
It is overkill here, sizeof(zaddr6) is constant and can't overflow.

Maybe, but the original code had a bug because using sizeof() directly is error prone.

Quoted 13 lines

238 /**

  239  * array_size() - Calculate size of 2-dimensional array.
  240  * @a: dimension one
  241  * @b: dimension two
  242  *
  243  * Calculates size of 2-dimensional array: @a * @b.
  244  *
  245  * Returns: number of bytes needed to represent the array or SIZE_MAX on
  246  * overflow.
  247  */

248 #define array_size(a, b) size_mul(a, b)

Quoted 8 lines

Quoted 2 lines
2. It's a shame that ipv6_addr_any() or some other common helper can't be used.
I didn't use ipv6_addr_any() as it required from me to cast "__be32 *addr6" to be "struct in6_addr *" just to replace one line memcmp to another one line function.
Do you want me to post this code instead?

No :)

I don't have a strong desire for churn.
Just for correct code.

As your patch is correct, it is fine by me in the current form.

Simon Horman

2023-04-20 14:36 UTC #9 lore raw

Re: [PATCH net-next 3/5] net/mlx5e: Compare all fields in IPv6 address

Quoted 28 lines · Simon Horman

Quoted 27 lines · Leon Romanovsky
Quoted 25 lines · Simon Horman
Quoted 17 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Fix size argument in memcmp to compare whole IPv6 address.
Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by Raed Salem <[email protected]>
Reviewed-by Emeel Hakim <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
index f7f7c09d2b32..4e9887171508 100644
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h static inline bool addr6_all_zero(__be32 *addr6) · line 290
Quoted 5 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1
@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
1. Perhaps array_size() is appropriate here?

Quoted 4 lines

Quoted 1 line
It is overkill here, sizeof(zaddr6) is constant and can't overflow.
Maybe, but the original code had a bug because using sizeof() directly is error prone.

Sorry, just to clarify.
I now realise that ARRAY_SIZE() is what I meant to suggest earlier.

Quoted 30 lines

Quoted 12 lines
238 /**
  239  * array_size() - Calculate size of 2-dimensional array.
  240  * @a: dimension one
  241  * @b: dimension two
  242  *
  243  * Calculates size of 2-dimensional array: @a * @b.
  244  *
  245  * Returns: number of bytes needed to represent the array or SIZE_MAX on
  246  * overflow.
  247  */
248 #define array_size(a, b) size_mul(a, b)
Quoted 8 lines
Quoted 2 lines
2. It's a shame that ipv6_addr_any() or some other common helper can't be used.
I didn't use ipv6_addr_any() as it required from me to cast "__be32 *addr6" to be "struct in6_addr *" just to replace one line memcmp to another one line function.
Do you want me to post this code instead?
No :)
I don't have a strong desire for churn.
Just for correct code.
As your patch is correct, it is fine by me in the current form.
Reviewed-by Simon Horman <[email protected]>

Leon Romanovsky

author

2023-04-20 17:13 UTC #10 lore raw

Re: [PATCH net-next 3/5] net/mlx5e: Compare all fields in IPv6 address

Quoted 29 lines · Simon Horman

Quoted 28 lines · Simon Horman
Quoted 27 lines · Leon Romanovsky
Quoted 25 lines · Simon Horman
Quoted 17 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Fix size argument in memcmp to compare whole IPv6 address.
Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by Raed Salem <[email protected]>
Reviewed-by Emeel Hakim <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
index f7f7c09d2b32..4e9887171508 100644
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h static inline bool addr6_all_zero(__be32 *addr6) · line 290
Quoted 5 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1
@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
1. Perhaps array_size() is appropriate here?

Quoted 7 lines

Quoted 4 lines
Quoted 1 line
It is overkill here, sizeof(zaddr6) is constant and can't overflow.
Maybe, but the original code had a bug because using sizeof() directly is error prone.
Sorry, just to clarify.
I now realise that ARRAY_SIZE() is what I meant to suggest earlier.

ARRAY_SIZE(zaddr6) will give us 4, so we will need to multiple in sizeof(__be32) to get the right result (16 bytes).

sizeof(zaddr6) == ARRAY_SIZE(zaddr6) * sizeof(__be32)

Thanks

Simon Horman

2023-04-21 09:05 UTC #11 lore raw

Re: [PATCH net-next 3/5] net/mlx5e: Compare all fields in IPv6 address

Quoted 35 lines · Leon Romanovsky

Quoted 34 lines · Simon Horman
Quoted 32 lines · Simon Horman
Quoted 22 lines · Leon Romanovsky
Quoted 21 lines · Simon Horman
Quoted 20 lines · Leon Romanovsky
From: Leon Romanovsky <[email protected]>
Fix size argument in memcmp to compare whole IPv6 address.
Fixes b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Reviewed-by Raed Salem <[email protected]>
Reviewed-by Emeel Hakim <[email protected]>
Signed-off-by Leon Romanovsky <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +0 -0
index f7f7c09d2b32..4e9887171508 100644
@@ -287,7 +287,7 @@ static inline bool addr6_all_zero(__be32 *addr6)
 {
 	static const __be32 zaddr6[4] = {};
 
Quoted 6 lines
Quoted 4 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h static inline bool addr6_all_zero(__be32 *addr6) · line 290
Quoted 2 lines
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.h +1 -1
-	return !memcmp(addr6, zaddr6, sizeof(*zaddr6));
+	return !memcmp(addr6, zaddr6, sizeof(zaddr6));
1. Perhaps array_size() is appropriate here?
It is overkill here, sizeof(zaddr6) is constant and can't overflow.
Maybe, but the original code had a bug because using sizeof() directly is error prone.

Quoted 7 lines

Quoted 2 lines
Sorry, just to clarify.
I now realise that ARRAY_SIZE() is what I meant to suggest earlier.
ARRAY_SIZE(zaddr6) will give us 4, so we will need to multiple in sizeof(__be32) to get the right result (16 bytes).
sizeof(zaddr6) == ARRAY_SIZE(zaddr6) * sizeof(__be32)

Let's retire this thread.

[email protected]

CI Applied

2023-04-21 11:00 UTC #16 lore raw