allow run with minimal kernel config
Subsystems (2)
v2 cover allow run with minimal kernel config
Willy, Thomas
This is v2 to allow run with minimal kernel config, see v1 [1].
It mainly applied the suggestions from Thomas. It is based on our previous v5 sysret helper series [2] and Thomas' chmod_net removal patchset [3].
Now, a test report on arm/vexpress-a9 without procfs, shmem, tmpfs, net and memfd_create looks like:
LOG: testing report for arm/vexpress-a9:
14 chmod_net [SKIPPED]
15 chmod_self [SKIPPED]
17 chown_self [SKIPPED]
41 link_cross [SKIPPED]
0 -fstackprotector not supported [SKIPPED]
139 test(s) passed, 5 skipped, 0 failed.
See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.log
LOG: testing summary:
arch/board | result
------------|------------
arm/vexpress-a9 | 139 test(s) passed, 5 skipped, 0 failed. See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.log
Changes from v1 --> v2:
* selftests/nolibc: stat_fault: silence NULL argument warning with glibc selftests/nolibc: gettid: restore for glibc and musl selftests/nolibc: add _LARGEFILE64_SOURCE for musl selftests/nolibc: add a new rmdir() test case selftests/nolibc: fix up failures when CONFIG_PROC_FS=n
The same as v1, only a few of commit message changes.
* selftests/nolibc: fix up int_fast16/32_t test cases for musl
Applied the method suggested by Thomas, two new macros are added to get SINT_MAX_OF_TYPE(type) and SINT_MIN_OF_TYPE(type).
* selftests/nolibc: fix up kernel parameters support
After discuss with Thomas and with more tests, both of argv[1] and NOLIBC_TEST environment variable should be verified to support such kernel parameters:
NOLIBC_TEST=syscall
noapic NOLIBC_TEST=syscall
noapic
* selftests/nolibc: stat_timestamps: remove procfs dependency
Add '/init' and '/' for !procfs, don't skip it.
* selftests/nolibc: link_cross: use /proc/self/cmdline
Use /proc/self/cmdline instead of /proc/self/net, the ramfs based /tmp/file doesn't work as expected (not really crossdev).
* tools/nolibc: add rmdir() support
Now, rebased on __sysret() from sysret helper patchset [2].
* selftests/nolibc: prepare /tmp for tmpfs or ramfs
Removed the hugetlbfs prepare part, not really required.
Don't remove /tmp and reserve it to use ramfs as tmpfs.
* selftests/nolibc: add common get_tmpfile() selftests/nolibc: rename chroot_exe to chroot_tmpfile
Some cleanups.
* selftests/nolibc: add chmod_tmpfile test
To avoid conflict with Thomas' chmod_net removal patch [3], a new chmod_tmpfile is added (in v1, there is a rename patch from chmod_net to chmod_good)
Still to avoid conflict, these two are removed in this series:
- selftests/nolibc: rename proc variable to has_proc
- selftests/nolibc: rename euid0 variable to is_root
* selftests/nolibc: vfprintf: remove MEMFD_CREATE dependency
Many checks are removed, only reserve the direct tmpfs access version.
Best regards,
Zhangjin
---
[1]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://lore.kernel.org/lkml/[email protected]/
[3]: https://lore.kernel.org/lkml/[email protected]/
Zhangjin Wu (15):
selftests/nolibc: stat_fault: silence NULL argument warning with glibc selftests/nolibc: gettid: restore for glibc and musl selftests/nolibc: add _LARGEFILE64_SOURCE for musl selftests/nolibc: fix up int_fast16/32_t test cases for musl selftests/nolibc: fix up kernel parameters support selftests/nolibc: stat_timestamps: remove procfs dependency selftests/nolibc: link_cross: use /proc/self/cmdline tools/nolibc: add rmdir() support
selftests/nolibc: add a new rmdir() test case selftests/nolibc: fix up failures when CONFIG_PROC_FS=n selftests/nolibc: prepare /tmp for tmpfs or ramfs selftests/nolibc: add common get_tmpfile() selftests/nolibc: rename chroot_exe to chroot_tmpfile selftests/nolibc: add chmod_tmpfile test
selftests/nolibc: vfprintf: remove MEMFD_CREATE dependency
tools/include/nolibc/sys.h | 22 ++++ tools/testing/selftests/nolibc/nolibc-test.c | 102 +++++++++++++++---- 2 files changed, 106 insertions(+), 18 deletions(-)
Signature · 1 line
2.25.1
PATCH v2 1/15 selftests/nolibc: stat_fault: silence NULL argument warning with glibc
Use another invalid address (void *)1 instead of NULL to silence this compile warning with glibc:
$ make libc-test
CC libc-test
nolibc-test.c: In function ‘run_syscall’:
nolibc-test.c:622:49: warning: null argument where non-null required (argument 1) [-Wnonnull]
622 | CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break;
| ^~~~
nolibc-test.c:304:79: note: in definition of macro ‘EXPECT_SYSER2’
304 | do { if (!cond) pad_spc(llen, 64, "[SKIPPED]\n"); else ret += expect_syserr2(expr, expret, experr1, experr2, llen); } while (0)
| ^~~~
nolibc-test.c:622:33: note: in expansion of macro ‘EXPECT_SYSER’
622 | CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break;--- tools/testing/selftests/nolibc/nolibc-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/nolibc/nolibc-test.c +1 -1
@@ -734,7 +734,7 @@ int run_syscall(int min, int max)CASE_TEST (select_stdout);EXPECT_SYSNE (1 , ({fd_set fds;FD_ZERO (&fds);FD_SET (1 , &fds);select (2 ,NULL , &fds,NULL ,NULL ); }),-1 );break ;CASE_TEST (select_fault);EXPECT_SYSER (1 ,select (1 , (void *)1 ,NULL ,NULL ,0 ),-1 ,EFAULT );break ;CASE_TEST (stat_blah);EXPECT_SYSER (1 ,stat ("/proc/self/blah" , &stat_buf),-1 ,ENOENT );break ; -CASE_TEST (stat_fault);EXPECT_SYSER (1 ,stat (NULL , &stat_buf),-1 ,EFAULT );break ; +CASE_TEST (stat_fault);EXPECT_SYSER (1 ,stat ((void *)1 , &stat_buf),-1 ,EFAULT );break ;CASE_TEST (stat_timestamps);EXPECT_SYSZR (1 ,test_stat_timestamps ());break ;CASE_TEST (symlink_root);EXPECT_SYSER (1 ,symlink ("/" ,"/" ),-1 ,EEXIST );break ;CASE_TEST (unlink_root);EXPECT_SYSER (1 ,unlink ("/" ),-1 ,EISDIR );break ;
Signature · 1 line
2.25.1
PATCH v2 2/15 selftests/nolibc: gettid: restore for glibc and musl
In reply to Zhangjin WuAs the gettid manpage [1] shows, glibc 2.30 has gettid support, so, let's enable the test for glibc >= 2.30.
gettid works on musl too.
[1]: https://man7.org/linux/man-pages/man2/gettid.2.html
--- tools/testing/selftests/nolibc/nolibc-test.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
tools/testing/selftests/nolibc/nolibc-test.c +7 -3
@@ -659,6 +659,7 @@ int run_syscall(int min, int max)int tmp;int ret =0 ;void *p1, *p2; +int has_gettid =1 ;/* <proc> indicates whether or not /proc is mounted */ proc =stat ("/proc" , &stat_buf) ==0 ;
@@ -666,6 +667,11 @@ int run_syscall(int min, int max)/* this will be used to skip certain tests that can't be run unprivileged */ euid0 =geteuid () ==0 ; +/* from 2.30, glibc provides gettid() */ +#if defined(__GLIBC_MINOR__) && defined(__GLIBC__) + has_gettid = __GLIBC__ >2 || (__GLIBC__ ==2 && __GLIBC_MINOR__ >=30 ); +#endif +for (test = min; test >=0 && test <= max; test++) {int llen =0 ;/* line length */
@@ -675,9 +681,7 @@ int run_syscall(int min, int max)switch (test + __LINE__ +1 ) {CASE_TEST (getpid);EXPECT_SYSNE (1 ,getpid (),-1 );break ;CASE_TEST (getppid);EXPECT_SYSNE (1 ,getppid (),-1 );break ; -#ifdef NOLIBC -CASE_TEST (gettid);EXPECT_SYSNE (1 ,gettid (),-1 );break ; -#endif +CASE_TEST (gettid);EXPECT_SYSNE (has_gettid,gettid (),-1 );break ;CASE_TEST (getpgid_self);EXPECT_SYSNE (1 ,getpgid (0 ),-1 );break ;CASE_TEST (getpgid_bad);EXPECT_SYSER (1 ,getpgid (-1 ),-1 ,ESRCH );break ;CASE_TEST (kill_0);EXPECT_SYSZR (1 ,kill (getpid (),0 ));break ;
Signature · 1 line
2.25.1
PATCH v2 3/15 selftests/nolibc: add _LARGEFILE64_SOURCE for musl
In reply to Zhangjin Wu_GNU_SOURCE Implies _LARGEFILE64_SOURCE in glibc, but in musl, the default configuration doesn't enable _LARGEFILE64_SOURCE.
From include/dirent.h of musl, getdents64 is provided as getdents when _LARGEFILE64_SOURCE is defined.
#if defined(_LARGEFILE64_SOURCE)
...
#define getdents64 getdents
#endifLet's define _LARGEFILE64_SOURCE to fix up this compile error:
tools/testing/selftests/nolibc/nolibc-test.c: In function ‘test_getdents64’:
tools/testing/selftests/nolibc/nolibc-test.c:453:8: warning: implicit declaration of function ‘getdents64’; did you mean ‘getdents’? [-Wimplicit-function-declaration]
453 | ret = getdents64(fd, (void *)buffer, sizeof(buffer));
| ^~~~~~~~~~
| getdents
/usr/bin/ld: /tmp/ccKILm5u.o: in function `test_getdents64':
nolibc-test.c:(.text+0xe3e): undefined reference to `getdents64'
collect2: error: ld returned 1 exit status
--- tools/testing/selftests/nolibc/nolibc-test.c | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/nolibc/nolibc-test.c +1 -0
@@ -1,6 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ #define _GNU_SOURCE +#define _LARGEFILE64_SOURCE/* libc-specific include files * The program may be built in 3 ways:
Signature · 1 line
2.25.1
PATCH v2 4/15 selftests/nolibc: fix up int_fast16/32_t test cases for musl
In reply to Zhangjin Wumusl limits the fast signed int in 32bit, but glibc and nolibc don't, to let such test cases work on musl, let's provide the type based SINT_MAX_OF_TYPE(type) and SINT_MIN_OF_TYPE(type).
--- tools/testing/selftests/nolibc/nolibc-test.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
tools/testing/selftests/nolibc/nolibc-test.c +8 -4
@@ -41,6 +41,10 @@#endif #endif +/* for the type of int_fast16_t and int_fast32_t, musl differs from glibc and nolibc */ +#define SINT_MAX_OF_TYPE (type) (((type)1 << (sizeof(type) * 8 - 2)) - (type)1 + ((type)1 << (sizeof(type) * 8 - 2))) +#define SINT_MIN_OF_TYPE (type) (-SINT_MAX_OF_TYPE(type) - 1) +/* will be used by nolibc by getenv() */ char **environ;
@@ -819,11 +823,11 @@ int run_stdlib(int min, int max)CASE_TEST (limit_int_fast8_max);EXPECT_EQ (1 ,INT_FAST8_MAX , (int_fast8_t )0x7f );break ;CASE_TEST (limit_int_fast8_min);EXPECT_EQ (1 ,INT_FAST8_MIN , (int_fast8_t )0x80 );break ;CASE_TEST (limit_uint_fast8_max);EXPECT_EQ (1 ,UINT_FAST8_MAX , (uint_fast8_t )0xff );break ; -CASE_TEST (limit_int_fast16_min);EXPECT_EQ (1 ,INT_FAST16_MIN , (int_fast16_t )INTPTR_MIN );break ; -CASE_TEST (limit_int_fast16_max);EXPECT_EQ (1 ,INT_FAST16_MAX , (int_fast16_t )INTPTR_MAX );break ; +CASE_TEST (limit_int_fast16_min);EXPECT_EQ (1 ,INT_FAST16_MIN , (int_fast16_t )SINT_MIN_OF_TYPE (int_fast16_t));break ; +CASE_TEST (limit_int_fast16_max);EXPECT_EQ (1 ,INT_FAST16_MAX , (int_fast16_t )SINT_MAX_OF_TYPE (int_fast16_t));break ;CASE_TEST (limit_uint_fast16_max);EXPECT_EQ (1 ,UINT_FAST16_MAX , (uint_fast16_t )UINTPTR_MAX );break ; -CASE_TEST (limit_int_fast32_min);EXPECT_EQ (1 ,INT_FAST32_MIN , (int_fast32_t )INTPTR_MIN );break ; -CASE_TEST (limit_int_fast32_max);EXPECT_EQ (1 ,INT_FAST32_MAX , (int_fast32_t )INTPTR_MAX );break ; +CASE_TEST (limit_int_fast32_min);EXPECT_EQ (1 ,INT_FAST32_MIN , (int_fast32_t )SINT_MIN_OF_TYPE (int_fast32_t));break ; +CASE_TEST (limit_int_fast32_max);EXPECT_EQ (1 ,INT_FAST32_MAX , (int_fast32_t )SINT_MAX_OF_TYPE (int_fast32_t));break ;CASE_TEST (limit_uint_fast32_max);EXPECT_EQ (1 ,UINT_FAST32_MAX , (uint_fast32_t )UINTPTR_MAX );break ;CASE_TEST (limit_int_fast64_min);EXPECT_EQ (1 ,INT_FAST64_MIN , (int_fast64_t )INT64_MIN );break ;CASE_TEST (limit_int_fast64_max);EXPECT_EQ (1 ,INT_FAST64_MAX , (int_fast64_t )INT64_MAX );break ;
Signature · 1 line
2.25.1
PATCH v2 5/15 selftests/nolibc: fix up kernel parameters support
In reply to Zhangjin Wukernel parameters allow pass two types of strings, one type is like 'noapic', another type is like 'panic=5', the first type is passed as arguments of the init program, the second type is passed as environment variables of the init program.
when users pass kernel parameters like this:
noapic NOLIBC_TEST=syscall
our nolibc-test program will use the test setting from argv[1] and ignore the one from NOLIBC_TEST environment variable, and at last, it will print the following line and ignore the whole test setting.
Ignoring unknown test name 'noapic'
reversing the parsing order does solve the above issue:
test = getenv("NOLIBC_TEST");
if (test)
test = argv[1];but it still doesn't work with such kernel parameters (without NOLIBC_TEST environment variable):
noapic FOO=bar
To support all of the potential kernel parameters, let's verify the test setting from both of argv[1] and NOLIBC_TEST environment variable.
--- tools/testing/selftests/nolibc/nolibc-test.c | 33 ++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-)
tools/testing/selftests/nolibc/nolibc-test.c +31 -2
@@ -1063,6 +1063,35 @@ static const struct test test_names[] = { { 0 } }; +int is_setting_valid (char *test) +{ +int idx, len, test_len, valid =0 ; +char delimiter; + +if (!test) +return valid; + + test_len =strlen (test); + +for (idx =0 ; test_names[idx].name; idx++) { + len =strlen (test_names[idx].name); +if (test_len < len) +continue ; + +if (strncmp (test, test_names[idx].name, len) !=0 ) +continue ; + + delimiter = test[len]; +if (delimiter !=':' && delimiter !=',' && delimiter !='\0' ) +continue ; + + valid =1 ; +break ; + } + +return valid; +} +int main (int argc,char **argv,char **envp) {int min =0 ;
@@ -1088,10 +1117,10 @@ int main(int argc, char **argv, char **envp)* syscall:5-15[:.*],stdlib:8-10 */ test = argv[1 ]; -if (!test) +if (!is_setting_valid (test)) test =getenv ("NOLIBC_TEST" ); -if (test) { +if (is_setting_valid (test)) {char *comma, *colon, *dash, *value; do {
Signature · 1 line
2.25.1
PATCH v2 6/15 selftests/nolibc: stat_timestamps: remove procfs dependency
In reply to Zhangjin Wu'/proc/self/' is a good path which doesn't have stale time info but it is only available for CONFIG_PROC_FS=y.
For CONFIG_PROC_FS=n, Let's try '/init' for initramfs and '/' for the others.
--- tools/testing/selftests/nolibc/nolibc-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/nolibc/nolibc-test.c +1 -1
@@ -582,7 +582,7 @@ static int test_stat_timestamps(void)if (sizeof (st.st_atim.tv_sec) !=sizeof (st.st_atime))return 1 ; -if (stat ("/proc/self/" , &st)) +if (stat ("/proc/self/" , &st) &&stat ("/init" , &st) &&stat ("/" , &st))return 1 ;if (st.st_atim.tv_sec != st.st_atime || st.st_atim.tv_nsec >1000000000 )
Signature · 1 line
2.25.1
PATCH v2 7/15 selftests/nolibc: link_cross: use /proc/self/cmdline
In reply to Zhangjin WuFor CONFIG_NET=n, there would be no /proc/self/net, so, use /proc/self/cmdline instead.
--- tools/testing/selftests/nolibc/nolibc-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/nolibc/nolibc-test.c +1 -1
@@ -724,7 +724,7 @@ int run_syscall(int min, int max)CASE_TEST (link_root1);EXPECT_SYSER (1 ,link ("/" ,"/" ),-1 ,EEXIST );break ;CASE_TEST (link_blah);EXPECT_SYSER (1 ,link ("/proc/self/blah" ,"/blah" ),-1 ,ENOENT );break ;CASE_TEST (link_dir);EXPECT_SYSER (euid0,link ("/" ,"/blah" ),-1 ,EPERM );break ; -CASE_TEST (link_cross);EXPECT_SYSER (proc,link ("/proc/self/net" ,"/blah" ),-1 ,EXDEV );break ; +CASE_TEST (link_cross);EXPECT_SYSER (proc,link ("/proc/self/cmdline" ,"/blah" ),-1 ,EXDEV );break ;CASE_TEST (lseek_m1);EXPECT_SYSER (1 ,lseek (-1 ,0 ,SEEK_SET ),-1 ,EBADF );break ;CASE_TEST (lseek_0);EXPECT_SYSER (1 ,lseek (0 ,0 ,SEEK_SET ),-1 ,ESPIPE );break ;CASE_TEST (mkdir_root);EXPECT_SYSER (1 ,mkdir ("/" ,0755 ),-1 ,EEXIST );break ;
Signature · 1 line
2.25.1
PATCH v2 8/15 tools/nolibc: add rmdir() support
In reply to Zhangjin Wua reverse operation of mkdir() is meaningful, add rmdir() here.
required by nolibc-test to remove /proc while CONFIG_PROC_FS is not enabled.
--- tools/include/nolibc/sys.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
tools/include/nolibc/sys.h +22 -0
@@ -610,6 +610,28 @@ int mkdir(const char *path, mode_t mode)return __sysret (sys_mkdir (path, mode)); } +/* +* int rmdir(const char *path); +*/ + +static __attribute__((unused)) +int sys_rmdir (const char *path) +{ +#ifdef __NR_rmdir +return my_syscall1 (__NR_rmdir, path); +#elif defined(__NR_unlinkat) +return my_syscall3 (__NR_unlinkat,AT_FDCWD , path,AT_REMOVEDIR ); +#else +return -ENOSYS ; +#endif +} + +static __attribute__((unused)) +int rmdir (const char *path) +{ +return __sysret (sys_rmdir (path)); +} +/* * int mknod(const char *path, mode_t mode, dev_t dev);
Signature · 1 line
2.25.1
PATCH v2 9/15 selftests/nolibc: add a new rmdir() test case
In reply to Zhangjin WuA new rmdir_blah test case is added to remove a non-existing /blah, which expects failure with ENOENT errno.
--- tools/testing/selftests/nolibc/nolibc-test.c | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/nolibc/nolibc-test.c +1 -0
@@ -738,6 +738,7 @@ int run_syscall(int min, int max)CASE_TEST (poll_fault);EXPECT_SYSER (1 ,poll ((void *)1 ,1 ,0 ),-1 ,EFAULT );break ;CASE_TEST (prctl);EXPECT_SYSER (1 ,prctl (PR_SET_NAME , (unsigned long )NULL ,0 ,0 ,0 ),-1 ,EFAULT );break ;CASE_TEST (read_badf);EXPECT_SYSER (1 ,read (-1 , &tmp,1 ),-1 ,EBADF );break ; +CASE_TEST (rmdir_blah);EXPECT_SYSER (1 ,rmdir ("/blah" ),-1 ,ENOENT );break ;CASE_TEST (sched_yield);EXPECT_SYSZR (1 ,sched_yield ());break ;CASE_TEST (select_null);EXPECT_SYSZR (1 , ({struct timeval tv = {0 };select (0 ,NULL ,NULL ,NULL , &tv); }));break ;CASE_TEST (select_stdout);EXPECT_SYSNE (1 , ({fd_set fds;FD_ZERO (&fds);FD_SET (1 , &fds);select (2 ,NULL , &fds,NULL ,NULL ); }),-1 );break ;
Signature · 1 line
2.25.1
PATCH v2 10/15 selftests/nolibc: fix up failures when CONFIG_PROC_FS=n
In reply to Zhangjin WuFor CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc directory has been created in the prepare() stage whenever /proc is there or not.
so, the checking of /proc in the run_syscall() stage will be always true and at last it will fail all of the procfs dependent test cases, which deviates from the 'cond' check design of the EXPECT_xx macros, without procfs, these test cases should be skipped instead of failed.
To solve this issue, one method is checking /proc/self instead of /proc, another method is removing the /proc directory completely for CONFIG_PROC_FS=n, we apply the second method to avoid misleading the users.
--- tools/testing/selftests/nolibc/nolibc-test.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
tools/testing/selftests/nolibc/nolibc-test.c +5 -2
@@ -1047,8 +1047,11 @@ int prepare(void)/* try to mount /proc if not mounted. Silently fail otherwise */ if (stat ("/proc/." , &stat_buf) ==0 ||mkdir ("/proc" ,0755 ) ==0 ) { -if (stat ("/proc/self" , &stat_buf) !=0 ) -mount ("/proc" ,"/proc" ,"proc" ,0 ,0 ); +if (stat ("/proc/self" , &stat_buf) !=0 ) { +/* If not mountable, remove /proc completely to avoid misuse */ +if (mount ("none" ,"/proc" ,"proc" ,0 ,0 ) !=0 ) +rmdir ("/proc" ); + } }return 0 ;
Signature · 1 line
2.25.1
PATCH v2 11/15 selftests/nolibc: prepare /tmp for tmpfs or ramfs
In reply to Zhangjin WuLet's create a /tmp directory and mount tmpfs there, if tmpfs is not mountable, use ramfs as tmpfs.
tmpfs will be used instead of procfs for some tests.
--- tools/testing/selftests/nolibc/nolibc-test.c | 4 ++++ 1 file changed, 4 insertions(+)
tools/testing/selftests/nolibc/nolibc-test.c +4 -0
@@ -1054,6 +1054,10 @@ int prepare(void) } } +/* try to mount /tmp if not mounted, if not mountable, use ramfs as tmpfs */ +if (stat ("/tmp/." , &stat_buf) ==0 ||mkdir ("/tmp" ,0755 ) ==0 ) +mount ("none" ,"/tmp" ,"tmpfs" ,0 ,0 ); +return 0 ; }
Signature · 1 line
2.25.1
PATCH v2 12/15 selftests/nolibc: add common get_tmpfile()
In reply to Zhangjin Wuallow create and get a temporary file from tmpfs.
--- tools/testing/selftests/nolibc/nolibc-test.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
tools/testing/selftests/nolibc/nolibc-test.c +17 -0
@@ -54,6 +54,23 @@ struct test {int (*func)(int min,int max);/* handler */ }; +static const char *get_tmpfile (const char *tmpfile) +{ +struct stat stat_buf; +int fd; + +if (stat (tmpfile, &stat_buf) ==0 ) +return tmpfile; + + fd =open (tmpfile,O_CREAT ,0600 ); +if (fd !=-1 ) { +close (fd); +return tmpfile; + } + +return NULL ; +} +#ifndef _NOLIBC_STDLIB_Hchar *itoa (int i) {
Signature · 1 line
2.25.1
PATCH v2 13/15 selftests/nolibc: rename chroot_exe to chroot_tmpfile
In reply to Zhangjin WuFor CONFIG_PROC_FS=n, let's use tmpfs and create a tmp file for chroot_exe test.
Since chroot_exe is mainly testing the not directory case (ENOTDIR), so, rename it to chroot_tmpfile may be better.
--- tools/testing/selftests/nolibc/nolibc-test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/testing/selftests/nolibc/nolibc-test.c +3 -1
@@ -682,6 +682,8 @@ int run_syscall(int min, int max)int ret =0 ;void *p1, *p2;int has_gettid =1 ; +const char *tmpfile =get_tmpfile ("/tmp/dummy" ); +int has_tmpfile = tmpfile !=NULL ;/* <proc> indicates whether or not /proc is mounted */ proc =stat ("/proc" , &stat_buf) ==0 ;
@@ -720,7 +722,7 @@ int run_syscall(int min, int max)CASE_TEST (chown_self);EXPECT_SYSER (proc,chown ("/proc/self" ,0 ,0 ),-1 ,EPERM );break ;CASE_TEST (chroot_root);EXPECT_SYSZR (euid0,chroot ("/" ));break ;CASE_TEST (chroot_blah);EXPECT_SYSER (1 ,chroot ("/proc/self/blah" ),-1 ,ENOENT );break ; -CASE_TEST (chroot_exe);EXPECT_SYSER (proc,chroot ("/proc/self/exe" ),-1 ,ENOTDIR );break ; +CASE_TEST (chroot_tmpfile);EXPECT_SYSER (has_tmpfile,chroot (tmpfile),-1 ,ENOTDIR );break ;CASE_TEST (close_m1);EXPECT_SYSER (1 ,close (-1 ),-1 ,EBADF );break ;CASE_TEST (close_dup);EXPECT_SYSZR (1 ,close (dup (0 )));break ;CASE_TEST (dup_0); tmp =dup (0 );EXPECT_SYSNE (1 , tmp,-1 );close (tmp);break ;
Signature · 1 line
2.25.1
PATCH v2 14/15 selftests/nolibc: add chmod_tmpfile test
In reply to Zhangjin Wuallow test chmod with tmpfs even when procfs is not there.
--- tools/testing/selftests/nolibc/nolibc-test.c | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/nolibc/nolibc-test.c +1 -0
@@ -719,6 +719,7 @@ int run_syscall(int min, int max)CASE_TEST (chdir_blah);EXPECT_SYSER (1 ,chdir ("/blah" ),-1 ,ENOENT );break ;CASE_TEST (chmod_net);EXPECT_SYSZR (proc,chmod ("/proc/self/net" ,0555 ));break ;CASE_TEST (chmod_self);EXPECT_SYSER (proc,chmod ("/proc/self" ,0555 ),-1 ,EPERM );break ; +CASE_TEST (chmod_tmpfile);EXPECT_SYSZR (has_tmpfile,chmod (tmpfile,0555 ));break ;CASE_TEST (chown_self);EXPECT_SYSER (proc,chown ("/proc/self" ,0 ,0 ),-1 ,EPERM );break ;CASE_TEST (chroot_root);EXPECT_SYSZR (euid0,chroot ("/" ));break ;CASE_TEST (chroot_blah);EXPECT_SYSER (1 ,chroot ("/proc/self/blah" ),-1 ,ENOENT );break ;
Signature · 1 line
2.25.1
PATCH v2 15/15 selftests/nolibc: vfprintf: remove MEMFD_CREATE dependency
In reply to Zhangjin WuThe vfprintf test case require to open a temporary file to write, the old memfd_create() method is perfect but has strong dependency on MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig):
config MEMFD_CREATE def_bool TMPFS || HUGETLBFS
And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable memfd, otherwise, The kernel warning will be output to the test result like this:
Running test 'vfprintf'
0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init'
"" = "" [OK]
To avoid such warning and also to remove the MEMFD_CREATE dependency, let's open a file from tmpfs directly.
The /tmp directory is used to detect the existing of tmpfs, if not there, skip instead of fail.
And further, for pid == 1, the initramfs is loaded as ramfs, which can be used as tmpfs, so, it is able to further remove TMPFS dependency too.
--- tools/testing/selftests/nolibc/nolibc-test.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/nolibc/nolibc-test.c +3 -3
@@ -888,10 +888,10 @@ static int expect_vfprintf(int llen, size_t c, const char *expected, const charFILE *memfile;va_list args; - fd =memfd_create ("vfprintf" ,0 ); + fd =open ("/tmp" ,O_TMPFILE |O_EXCL |O_RDWR ,0600 );if (fd ==-1 ) { -pad_spc (llen,64 ,"[FAIL]\n" ); -return 1 ; +pad_spc (llen,64 ,"[SKIPPED]\n" ); +return 0 ; } memfile =fdopen (fd,"w+" );
Signature · 1 line
2.25.1
Re: [PATCH v2 11/15] selftests/nolibc: prepare /tmp for tmpfs or ramfs
In reply to Zhangjin WuQuoted 15 lines · Zhangjin Wu
Let's create a /tmp directory and mount tmpfs there, if tmpfs is not mountable, use ramfs as tmpfs.
tmpfs will be used instead of procfs for some tests.
Signed-off-by Zhangjin Wu <[email protected]>--- tools/testing/selftests/nolibc/nolibc-test.c | 4 ++++ 1 file changed, 4 insertions(+)tools/testing/selftests/nolibc/nolibc-test.c +0
-0
tools/testing/selftests/nolibc/nolibc-test.c int prepare(void) · line 1060
Quoted 7 lines
tools/testing/selftests/nolibc/nolibc-test.c +4
-0@@ -1054,6 +1054,10 @@ int prepare(void) } } +/* try to mount /tmp if not mounted, if not mountable, use ramfs as tmpfs */ +if (stat ("/tmp/." , &stat_buf) ==0 ||mkdir ("/tmp" ,0755 ) ==0 ) +mount ("none" ,"/tmp" ,"tmpfs" ,0 ,0 ); +
mkdir()mount()
without any error checking should do the same and be easier to read.
Quoted 6 lines
tools/testing/selftests/nolibc/nolibc-test.c +0
-0return 0 ; }Signature · 1 line
2.25.1
Re: [PATCH v2 13/15] selftests/nolibc: rename chroot_exe to chroot_tmpfile
In reply to Zhangjin WuQuoted 25 lines · Zhangjin Wu
For
CONFIG_PROC_FS=n, let's use tmpfs and create a tmp file forchroot_exetest.Since
chroot_exeis mainly testing the not directory case (ENOTDIR), so, rename it tochroot_tmpfilemay be better.Signed-off-by Zhangjin Wu <[email protected]>--- tools/testing/selftests/nolibc/nolibc-test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)tools/testing/selftests/nolibc/nolibc-test.c +2
-0@@ -682,6 +682,8 @@ int run_syscall(int min, int max)int ret =0 ;void *p1, *p2;int has_gettid =1 ; +const char *tmpfile =get_tmpfile ("/tmp/dummy" ); +int has_tmpfile = tmpfile !=NULL ;/* <proc> indicates whether or not /proc is mounted */ proc =stat ("/proc" , &stat_buf) ==0 ;
tools/testing/selftests/nolibc/nolibc-test.c int run_syscall(int min, int max) · line 725
Quoted 5 lines
tools/testing/selftests/nolibc/nolibc-test.c +1
-1@@ -720,7 +722,7 @@ int run_syscall(int min, int max)CASE_TEST (chown_self);EXPECT_SYSER (proc,chown ("/proc/self" ,0 ,0 ),-1 ,EPERM );break ;CASE_TEST (chroot_root);EXPECT_SYSZR (euid0,chroot ("/" ));break ;CASE_TEST (chroot_blah);EXPECT_SYSER (1 ,chroot ("/proc/self/blah" ),-1 ,ENOENT );break ; -CASE_TEST (chroot_exe);EXPECT_SYSER (proc,chroot ("/proc/self/exe" ),-1 ,ENOTDIR );break ; +CASE_TEST (chroot_tmpfile);EXPECT_SYSER (has_tmpfile,chroot (tmpfile),-1 ,ENOTDIR );break ;
get_tempfile() looks really weird.
Given that the nolibc implementation of chroot() is the most trivial imaginable in my opinion we can keep the current "chroot_exe" that is using procfs.
Quoted 6 lines
tools/testing/selftests/nolibc/nolibc-test.c +0
-0CASE_TEST (close_m1);EXPECT_SYSER (1 ,close (-1 ),-1 ,EBADF );break ;CASE_TEST (close_dup);EXPECT_SYSZR (1 ,close (dup (0 )));break ;CASE_TEST (dup_0); tmp =dup (0 );EXPECT_SYSNE (1 , tmp,-1 );close (tmp);break ;Signature · 1 line
2.25.1
Quoted 8 lines · Zhangjin Wu
Willy, Thomas
This is v2 to allow run with minimal kernel config, see v1 [1].
It mainly applied the suggestions from Thomas. It is based on our previous v5 sysret helper series [2] and Thomas'
chmod_netremoval patchset [3].
Quoted 6 lines
Now, a test report on arm/vexpress-a9 without procfs, shmem, tmpfs, net and
memfd_createlooks like:LOG: testing report for arm/vexpress-a9:
14
chmod_net[SKIPPED]
Shouldn't this be gone?
Quoted 14 lines
15 chmod_self [SKIPPED] 17 chown_self [SKIPPED] 41 link_cross [SKIPPED] 0 -fstackprotector not supported [SKIPPED]139 test(s) passed, 5 skipped, 0 failed.
See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.logLOG: testing summary:
arch/board| result
------------|------------
arm/vexpress-a9 | 139 test(s) passed, 5 skipped, 0 failed. See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.log
Quoted 5 lines
[..]
tools/include/nolibc/sys.h | 22 ++++ tools/testing/selftests/nolibc/nolibc-test.c | 102 +++++++++++++++---- 2 files changed, 106 insertions(+), 18 deletions(-)
A few nitpicks left, mentioned on the patches themselves.
In general: for the full series.
Re: [PATCH v2 11/15] selftests/nolibc: prepare /tmp for tmpfs or ramfs
In reply to Thomas WeißschuhHi, Thomas
Quoted 27 lines · Zhangjin Wu
Quoted 15 lines
Let's create a /tmp directory and mount tmpfs there, if tmpfs is not mountable, use ramfs as tmpfs.
tmpfs will be used instead of procfs for some tests.
Signed-off-by Zhangjin Wu <[email protected]>--- tools/testing/selftests/nolibc/nolibc-test.c | 4 ++++ 1 file changed, 4 insertions(+)tools/testing/selftests/nolibc/nolibc-test.c +0
-0tools/testing/selftests/nolibc/nolibc-test.c int prepare(void) · line 1060
Quoted 7 lines
tools/testing/selftests/nolibc/nolibc-test.c +4
-0@@ -1054,6 +1054,10 @@ int prepare(void) } } +/* try to mount /tmp if not mounted, if not mountable, use ramfs as tmpfs */ +if (stat ("/tmp/." , &stat_buf) ==0 ||mkdir ("/tmp" ,0755 ) ==0 ) +mount ("none" ,"/tmp" ,"tmpfs" ,0 ,0 ); +
mkdir()mount()
Quoted 2 lines
without any error checking should do the same and be easier to read.
Yeah, will apply it, it saves a call for us.
Perhaps the other codes in prepare() can be cleaned up with the same method in the future too.
Thanks,
Zhangjin
Quoted 6 lines
Quoted 6 lines
tools/testing/selftests/nolibc/nolibc-test.c +0
-0return 0 ; }Signature · 1 line
2.25.1
Re: [PATCH v2 13/15] selftests/nolibc: rename chroot_exe to chroot_tmpfile
In reply to Thomas WeißschuhHi, Thomas
Quoted 23 lines · Zhangjin Wu
Quoted 22 lines
For
CONFIG_PROC_FS=n, let's use tmpfs and create a tmp file forchroot_exetest.Since
chroot_exeis mainly testing the not directory case (ENOTDIR), so, rename it tochroot_tmpfilemay be better.Signed-off-by Zhangjin Wu <[email protected]>--- tools/testing/selftests/nolibc/nolibc-test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)tools/testing/selftests/nolibc/nolibc-test.c +2
-0@@ -682,6 +682,8 @@ int run_syscall(int min, int max)int ret =0 ;void *p1, *p2;int has_gettid =1 ; +const char *tmpfile =get_tmpfile ("/tmp/dummy" ); +int has_tmpfile = tmpfile !=NULL ;
Quoted 10 lines
tools/testing/selftests/nolibc/nolibc-test.c int run_syscall(int min, int max) · line 725
Quoted 8 lines
tools/testing/selftests/nolibc/nolibc-test.c +1
-1/* <proc> indicates whether or not /proc is mounted */ proc =stat ("/proc" , &stat_buf) ==0 ;@@ -720,7 +722,7 @@ int run_syscall(int min, int max)CASE_TEST (chown_self);EXPECT_SYSER (proc,chown ("/proc/self" ,0 ,0 ),-1 ,EPERM );break ;CASE_TEST (chroot_root);EXPECT_SYSZR (euid0,chroot ("/" ));break ;CASE_TEST (chroot_blah);EXPECT_SYSER (1 ,chroot ("/proc/self/blah" ),-1 ,ENOENT );break ; -CASE_TEST (chroot_exe);EXPECT_SYSER (proc,chroot ("/proc/self/exe" ),-1 ,ENOTDIR );break ; +CASE_TEST (chroot_tmpfile);EXPECT_SYSER (has_tmpfile,chroot (tmpfile),-1 ,ENOTDIR );break ;
get_tempfile()looks really weird.
Yes, it is, it has been used in another patch, but now, only has one user, let's remove it.
Quoted 4 lines
Given that the nolibc implementation of
chroot()is the most trivial imaginable in my opinion we can keep the current "chroot_exe" that is using procfs.
Just did some new tests, what about this one?
- CASE_TEST(chroot_exe); EXPECT_SYSER(proc, chroot("/proc/self/exe"), -1, ENOTDIR); break;
+ CASE_TEST(chroot_exe); EXPECT_SYSER2(1, chroot(proc ? "/proc/self/exe" : "/init"), -1, ENOENT, ENOTDIR); break;"/init" added for !procfs, and ENOENT added for !/init ;-)
And for the chmod_tmpfile, it is changed to chmod_tmpdir like this:
CASE_TEST(chmod_tmpdir); mkdir("/tmp/blah", 0755); EXPECT_SYSZR(1, chmod("/tmp/blah", 0555)); rmdir("/tmp/blah"); break;Not sure if it is possible to use a syscall to return the file path from the fd without /proc/self/fd/<N>, if so, we could use the open(, O_TMPFILE...) method to get a random tmpfile, just like the mktemp command does, will run strace on it ;-)
Thanks,
Zhangjin
Quoted 6 lines
Quoted 6 lines
tools/testing/selftests/nolibc/nolibc-test.c +0
-0CASE_TEST (close_m1);EXPECT_SYSER (1 ,close (-1 ),-1 ,EBADF );break ;CASE_TEST (close_dup);EXPECT_SYSZR (1 ,close (dup (0 )));break ;CASE_TEST (dup_0); tmp =dup (0 );EXPECT_SYSNE (1 , tmp,-1 );close (tmp);break ;Signature · 1 line
2.25.1
Hi, Thomas
Quoted 9 lines · Zhangjin Wu
Quoted 8 lines
Willy, Thomas
This is v2 to allow run with minimal kernel config, see v1 [1].
It mainly applied the suggestions from Thomas. It is based on our previous v5 sysret helper series [2] and Thomas'
chmod_netremoval patchset [3].
Quoted 9 lines
Quoted 6 lines
Now, a test report on arm/vexpress-a9 without procfs, shmem, tmpfs, net and
memfd_createlooks like:LOG: testing report for arm/vexpress-a9:
14
chmod_net[SKIPPED]Shouldn't this be gone?
Yes, if apply your chmod_net removal patches before this series:
LOG: testing report for arm/vexpress-a9:
14 chmod_self [SKIPPED]
16 chown_self [SKIPPED]
40 link_cross [SKIPPED]
0 -fstackprotector not supported [SKIPPED]
139 test(s) passed, 4 skipped, 0 failed.
See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.log
LOG: testing summary:
arch/board | result
------------|------------
arm/vexpress-a9 | 139 test(s) passed, 4 skipped, 0 failed. See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.log
This test also applied the new proposed chroot_exe and chmod_tmpfile from https://lore.kernel.org/lkml/[email protected]/
Quoted 20 lines
Quoted 14 lines
15 chmod_self [SKIPPED] 17 chown_self [SKIPPED] 41 link_cross [SKIPPED] 0 -fstackprotector not supported [SKIPPED]139 test(s) passed, 5 skipped, 0 failed.
See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.logLOG: testing summary:
arch/board| result
------------|------------
arm/vexpress-a9 | 139 test(s) passed, 5 skipped, 0 failed. See all results in /labs/linux-lab/logging/nolibc/arm-vexpress-a9-nolibc-test.logQuoted 5 lines
[..]
tools/include/nolibc/sys.h | 22 ++++ tools/testing/selftests/nolibc/nolibc-test.c | 102 +++++++++++++++---- 2 files changed, 106 insertions(+), 18 deletions(-)
Quoted 6 lines
A few nitpicks left, mentioned on the patches themselves.
In general: for the full series.
Reviewed-by Thomas Weißschuh <[email protected]>
Thanks Thomas, will send v3 later.
Best regards,
Zhangjin