Skip to contentSkip to conversation

PPC440 devices misc clean up

PATCH Superseded BALATON Zoltan 2 participants 33 messages Jul 3, 2023 – Jul 4, 2023

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#24 lore raw

PATCH 11/13 ppc440_pcix: Rename QOM type define abd move it to common header

In reply to BALATON Zoltan

Rename TYPE_PPC440_PCIX_HOST_BRIDGE to better match its string value, move it to common header and use it also in sam460ex to replace hard coded type name.

---
 hw/ppc/ppc440_pcix.c    | 9 ++++-----
 hw/ppc/sam460ex.c       | 2 +-
 include/hw/ppc/ppc4xx.h | 1 +
 3 files changed, 6 insertions(+), 6 deletions(-)
hw/ppc/ppc440_pcix.c +4 -5
index dfec25ac83..adfecf1e76 100644
@@ -44,8 +44,7 @@ struct PLBInMap {
     MemoryRegion mr;
 };
 
-#define TYPE_PPC440_PCIX_HOST_BRIDGE "ppc440-pcix-host"
-OBJECT_DECLARE_SIMPLE_TYPE(PPC440PCIXState, PPC440_PCIX_HOST_BRIDGE)
+OBJECT_DECLARE_SIMPLE_TYPE(PPC440PCIXState, PPC440_PCIX_HOST)
 
 #define PPC440_PCIX_NR_POMS 3
 #define PPC440_PCIX_NR_PIMS 3
@@ -397,7 +396,7 @@ static const MemoryRegionOps pci_reg_ops = {
 
 static void ppc440_pcix_reset(DeviceState *dev)
 {
-    struct PPC440PCIXState *s = PPC440_PCIX_HOST_BRIDGE(dev);
+    struct PPC440PCIXState *s = PPC440_PCIX_HOST(dev);
     int i;
 
     for (i = 0; i < PPC440_PCIX_NR_POMS; i++) {
@@ -487,7 +486,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
     PCIHostState *h;
 
     h = PCI_HOST_BRIDGE(dev);
-    s = PPC440_PCIX_HOST_BRIDGE(dev);
+    s = PPC440_PCIX_HOST(dev);
 
     sysbus_init_irq(sbd, &s->irq);
     memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
@@ -525,7 +524,7 @@ static void ppc440_pcix_class_init(ObjectClass *klass, void *data)
 }
 
 static const TypeInfo ppc440_pcix_info = {
-    .name          = TYPE_PPC440_PCIX_HOST_BRIDGE,
+    .name          = TYPE_PPC440_PCIX_HOST,
     .parent        = TYPE_PCI_HOST_BRIDGE,
     .instance_size = sizeof(PPC440PCIXState),
     .class_init    = ppc440_pcix_class_init,
hw/ppc/sam460ex.c +1 -1
index d446cfc37b..8d0e551d14 100644
@@ -439,7 +439,7 @@ static void sam460ex_init(MachineState *machine)
 
     /* PCI bus */
     /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
-    dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000,
+    dev = sysbus_create_simple(TYPE_PPC440_PCIX_HOST, 0xc0ec00000,
                                qdev_get_gpio_in(uic[1], 0));
     pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0"));
 
include/hw/ppc/ppc4xx.h +1 -0
index 766d575e86..ea7740239b 100644
@@ -31,6 +31,7 @@
 
 #define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"
 #define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"
+#define TYPE_PPC440_PCIX_HOST "ppc440-pcix-host"
 #define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 
 /*
Signature · 1 line
2.30.9
#31 lore raw

PATCH 13/13 ppc440_pcix: Stop using system io region for PCI bus

In reply to BALATON Zoltan

Use the iomem region for the PCI io space and map it directly from the board without an intermediate alias that is not really needed.

---
 hw/ppc/ppc440_pcix.c | 8 +++++---
 hw/ppc/sam460ex.c    | 6 +-----
 2 files changed, 6 insertions(+), 8 deletions(-)
hw/ppc/ppc440_pcix.c +5 -3
index ee2dc44f67..cca8a72c72 100644
@@ -490,10 +490,11 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
     s = PPC440_PCIX_HOST(dev);
 
     sysbus_init_irq(sbd, &s->irq);
-    memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
+    memory_region_init(&s->busmem, OBJECT(dev), "pci-mem", UINT64_MAX);
+    memory_region_init(&s->iomem, OBJECT(dev), "pci-io", 0x10000);
     h->bus = pci_register_root_bus(dev, NULL, ppc440_pcix_set_irq,
-                         ppc440_pcix_map_irq, &s->irq, &s->busmem,
-                         get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
+                         ppc440_pcix_map_irq, &s->irq, &s->busmem, &s->iomem,
+                         PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
 
     s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0),
                                TYPE_PPC4xx_HOST_BRIDGE);
@@ -514,6 +515,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
     memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
     sysbus_init_mmio(sbd, &s->container);
+    sysbus_init_mmio(sbd, &s->iomem);
 }
 
 static void ppc440_pcix_class_init(ObjectClass *klass, void *data)
hw/ppc/sam460ex.c +1 -5
index 8d0e551d14..1e615b8d35 100644
@@ -269,7 +269,6 @@ static void main_cpu_reset(void *opaque)
 
 static void sam460ex_init(MachineState *machine)
 {
-    MemoryRegion *isa = g_new(MemoryRegion, 1);
     MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
     DeviceState *uic[4];
     int i;
@@ -441,12 +440,9 @@ static void sam460ex_init(MachineState *machine)
     /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
     dev = sysbus_create_simple(TYPE_PPC440_PCIX_HOST, 0xc0ec00000,
                                qdev_get_gpio_in(uic[1], 0));
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, 0xc08000000);
     pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0"));
 
-    memory_region_init_alias(isa, NULL, "isa_mmio", get_system_io(),
-                             0, 0x10000);
-    memory_region_add_subregion(get_system_memory(), 0xc08000000, isa);
-
     /* PCI devices */
     pci_create_simple(pci_bus, PCI_DEVFN(6, 0), "sm501");
     /* SoC has a single SATA port but we don't emulate that yet
Signature · 1 line
2.30.9
#5 lore raw

PATCH 3/13 ppc440: Add a macro to shorten PCIe controller DCR registration

In reply to BALATON Zoltan

It is more readable to wrap the complex call to ppc_dcr_register in a macro when needed repeatedly.

---
 hw/ppc/ppc440_uc.c | 76 +++++++++++++++++-----------------------------
 1 file changed, 28 insertions(+), 48 deletions(-)
hw/ppc/ppc440_uc.c +28 -48
index b26c0cee1b..db83a0dec8 100644
@@ -1002,56 +1002,36 @@ static void ppc460ex_set_irq(void *opaque, int irq_num, int level)
        qemu_set_irq(s->irq[irq_num], level);
 }
 
+#define PPC440_PCIE_DCR(s, dcrn) \
+    ppc_dcr_register(&(s)->cpu->env, (s)->dcrn_base + (dcrn), s, \
+                     &dcr_read_pcie, &dcr_write_pcie)
+
+
 static void ppc460ex_pcie_register_dcrs(PPC460EXPCIEState *s)
 {
-    CPUPPCState *env = &s->cpu->env;
-
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGBAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGBAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGMSK, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGBAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGBAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGMSK, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1BAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1BAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1MSKH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1MSKL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2BAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2BAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2MSKH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2MSKL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3BAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3BAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3MSKH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3MSKL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGBAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGBAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGMSK, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_SPECIAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFG, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
+    PPC440_PCIE_DCR(s, PEGPL_CFGBAH);
+    PPC440_PCIE_DCR(s, PEGPL_CFGBAL);
+    PPC440_PCIE_DCR(s, PEGPL_CFGMSK);
+    PPC440_PCIE_DCR(s, PEGPL_MSGBAH);
+    PPC440_PCIE_DCR(s, PEGPL_MSGBAL);
+    PPC440_PCIE_DCR(s, PEGPL_MSGMSK);
+    PPC440_PCIE_DCR(s, PEGPL_OMR1BAH);
+    PPC440_PCIE_DCR(s, PEGPL_OMR1BAL);
+    PPC440_PCIE_DCR(s, PEGPL_OMR1MSKH);
+    PPC440_PCIE_DCR(s, PEGPL_OMR1MSKL);
+    PPC440_PCIE_DCR(s, PEGPL_OMR2BAH);
+    PPC440_PCIE_DCR(s, PEGPL_OMR2BAL);
+    PPC440_PCIE_DCR(s, PEGPL_OMR2MSKH);
+    PPC440_PCIE_DCR(s, PEGPL_OMR2MSKL);
+    PPC440_PCIE_DCR(s, PEGPL_OMR3BAH);
+    PPC440_PCIE_DCR(s, PEGPL_OMR3BAL);
+    PPC440_PCIE_DCR(s, PEGPL_OMR3MSKH);
+    PPC440_PCIE_DCR(s, PEGPL_OMR3MSKL);
+    PPC440_PCIE_DCR(s, PEGPL_REGBAH);
+    PPC440_PCIE_DCR(s, PEGPL_REGBAL);
+    PPC440_PCIE_DCR(s, PEGPL_REGMSK);
+    PPC440_PCIE_DCR(s, PEGPL_SPECIAL);
+    PPC440_PCIE_DCR(s, PEGPL_CFG);
 }
 
 static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
Signature · 1 line
2.30.9
#19 lore raw

PATCH 9/13 ppc4xx_pci: Rename QOM type name define

In reply to BALATON Zoltan

Rename the TYPE_PPC4xx_PCI_HOST_BRIDGE define and its string value to match each other and other similar types and to avoid confusion with "ppc4xx-host-bridge" type defined in same file.

---
 hw/ppc/ppc440_bamboo.c  | 3 +--
 hw/ppc/ppc4xx_pci.c     | 6 +++---
 include/hw/ppc/ppc4xx.h | 2 +-
 3 files changed, 5 insertions(+), 6 deletions(-)
hw/ppc/ppc440_bamboo.c +1 -2
index f061b8cf3b..45f409c838 100644
@@ -205,8 +205,7 @@ static void bamboo_init(MachineState *machine)
     ppc4xx_sdram_ddr_enable(PPC4xx_SDRAM_DDR(dev));
 
     /* PCI */
-    dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE,
-                                PPC440EP_PCI_CONFIG,
+    dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST, PPC440EP_PCI_CONFIG,
                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[0]),
                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[1]),
                                 qdev_get_gpio_in(uicdev, pci_irq_nrs[2]),
hw/ppc/ppc4xx_pci.c +3 -3
index 1d4a50fa7c..fbdf8266d8 100644
@@ -46,7 +46,7 @@ struct PCITargetMap {
     uint32_t la;
 };
 
-OBJECT_DECLARE_SIMPLE_TYPE(PPC4xxPCIState, PPC4xx_PCI_HOST_BRIDGE)
+OBJECT_DECLARE_SIMPLE_TYPE(PPC4xxPCIState, PPC4xx_PCI_HOST)
 
 #define PPC4xx_PCI_NR_PMMS 3
 #define PPC4xx_PCI_NR_PTMS 2
@@ -321,7 +321,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, Error **errp)
     int i;
 
     h = PCI_HOST_BRIDGE(dev);
-    s = PPC4xx_PCI_HOST_BRIDGE(dev);
+    s = PPC4xx_PCI_HOST(dev);
 
     for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
         sysbus_init_irq(sbd, &s->irq[i]);
@@ -386,7 +386,7 @@ static void ppc4xx_pcihost_class_init(ObjectClass *klass, void *data)
 }
 
 static const TypeInfo ppc4xx_pcihost_info = {
-    .name          = TYPE_PPC4xx_PCI_HOST_BRIDGE,
+    .name          = TYPE_PPC4xx_PCI_HOST,
     .parent        = TYPE_PCI_HOST_BRIDGE,
     .instance_size = sizeof(PPC4xxPCIState),
     .class_init    = ppc4xx_pcihost_class_init,
include/hw/ppc/ppc4xx.h +1 -1
index 39ca602442..e053b9751b 100644
@@ -29,7 +29,7 @@
 #include "exec/memory.h"
 #include "hw/sysbus.h"
 
-#define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost"
+#define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"
 #define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 
 /*
Signature · 1 line
2.30.9
#11 lore raw

PATCH 5/13 ppc440: Stop using system io region for PCIe buses

In reply to BALATON Zoltan

Add separate memory regions for the mem and io spaces of the PCIe bus to avoid different buses using the same system io region.

---
 hw/ppc/ppc440_uc.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
hw/ppc/ppc440_uc.c +6 -3
index 38ee27f437..0c5d999878 100644
@@ -776,6 +776,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, PPC460EX_PCIE_HOST)
 struct PPC460EXPCIEState {
     PCIExpressHost host;
 
+    MemoryRegion busmem;
     MemoryRegion iomem;
     qemu_irq irq[4];
     int32_t dcrn_base;
@@ -1056,15 +1057,17 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
         error_setg(errp, "invalid PCIe DCRN base");
         return;
     }
+    snprintf(buf, sizeof(buf), "pcie%d-mem", id);
+    memory_region_init(&s->busmem, OBJECT(s), buf, UINT64_MAX);
     snprintf(buf, sizeof(buf), "pcie%d-io", id);
-    memory_region_init(&s->iomem, OBJECT(s), buf, UINT64_MAX);
+    memory_region_init(&s->iomem, OBJECT(s), buf, 0x10000);
     for (i = 0; i < 4; i++) {
         sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]);
     }
     snprintf(buf, sizeof(buf), "pcie.%d", id);
     pci->bus = pci_register_root_bus(DEVICE(s), buf, ppc460ex_set_irq,
-                                pci_swizzle_map_irq_fn, s, &s->iomem,
-                                get_system_io(), 0, 4, TYPE_PCIE_BUS);
+                                pci_swizzle_map_irq_fn, s, &s->busmem,
+                                &s->iomem, 0, 4, TYPE_PCIE_BUS);
     ppc460ex_pcie_register_dcrs(s);
 }
 
Signature · 1 line
2.30.9
#9 lore raw

PATCH 4/13 ppc440: Rename local variable in dcr_read_pcie()

In reply to BALATON Zoltan

Rename local variable storing state struct in dcr_read_pcie() for brevity and consistency with other functions.

---
 hw/ppc/ppc440_uc.c | 50 +++++++++++++++++++++++-----------------------
 1 file changed, 25 insertions(+), 25 deletions(-)
hw/ppc/ppc440_uc.c +25 -25
index db83a0dec8..38ee27f437 100644
@@ -828,78 +828,78 @@ enum {
 
 static uint32_t dcr_read_pcie(void *opaque, int dcrn)
 {
-    PPC460EXPCIEState *state = opaque;
+    PPC460EXPCIEState *s = opaque;
     uint32_t ret = 0;
 
-    switch (dcrn - state->dcrn_base) {
+    switch (dcrn - s->dcrn_base) {
     case PEGPL_CFGBAH:
-        ret = state->cfg_base >> 32;
+        ret = s->cfg_base >> 32;
         break;
     case PEGPL_CFGBAL:
-        ret = state->cfg_base;
+        ret = s->cfg_base;
         break;
     case PEGPL_CFGMSK:
-        ret = state->cfg_mask;
+        ret = s->cfg_mask;
         break;
     case PEGPL_MSGBAH:
-        ret = state->msg_base >> 32;
+        ret = s->msg_base >> 32;
         break;
     case PEGPL_MSGBAL:
-        ret = state->msg_base;
+        ret = s->msg_base;
         break;
     case PEGPL_MSGMSK:
-        ret = state->msg_mask;
+        ret = s->msg_mask;
         break;
     case PEGPL_OMR1BAH:
-        ret = state->omr1_base >> 32;
+        ret = s->omr1_base >> 32;
         break;
     case PEGPL_OMR1BAL:
-        ret = state->omr1_base;
+        ret = s->omr1_base;
         break;
     case PEGPL_OMR1MSKH:
-        ret = state->omr1_mask >> 32;
+        ret = s->omr1_mask >> 32;
         break;
     case PEGPL_OMR1MSKL:
-        ret = state->omr1_mask;
+        ret = s->omr1_mask;
         break;
     case PEGPL_OMR2BAH:
-        ret = state->omr2_base >> 32;
+        ret = s->omr2_base >> 32;
         break;
     case PEGPL_OMR2BAL:
-        ret = state->omr2_base;
+        ret = s->omr2_base;
         break;
     case PEGPL_OMR2MSKH:
-        ret = state->omr2_mask >> 32;
+        ret = s->omr2_mask >> 32;
         break;
     case PEGPL_OMR2MSKL:
-        ret = state->omr3_mask;
+        ret = s->omr3_mask;
         break;
     case PEGPL_OMR3BAH:
-        ret = state->omr3_base >> 32;
+        ret = s->omr3_base >> 32;
         break;
     case PEGPL_OMR3BAL:
-        ret = state->omr3_base;
+        ret = s->omr3_base;
         break;
     case PEGPL_OMR3MSKH:
-        ret = state->omr3_mask >> 32;
+        ret = s->omr3_mask >> 32;
         break;
     case PEGPL_OMR3MSKL:
-        ret = state->omr3_mask;
+        ret = s->omr3_mask;
         break;
     case PEGPL_REGBAH:
-        ret = state->reg_base >> 32;
+        ret = s->reg_base >> 32;
         break;
     case PEGPL_REGBAL:
-        ret = state->reg_base;
+        ret = s->reg_base;
         break;
     case PEGPL_REGMSK:
-        ret = state->reg_mask;
+        ret = s->reg_mask;
         break;
     case PEGPL_SPECIAL:
-        ret = state->special;
+        ret = s->special;
         break;
     case PEGPL_CFG:
-        ret = state->cfg;
+        ret = s->cfg;
         break;
     }
 
Signature · 1 line
2.30.9
#26 lore raw

PATCH 12/13 ppc440_pcix: Don't use iomem for regs

In reply to BALATON Zoltan

The iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.

---
 hw/ppc/ppc440_pcix.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +4 -3
index adfecf1e76..ee2dc44f67 100644
@@ -484,6 +484,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
     PPC440PCIXState *s;
     PCIHostState *h;
+    MemoryRegion *regs = g_new(MemoryRegion, 1);
 
     h = PCI_HOST_BRIDGE(dev);
     s = PPC440_PCIX_HOST(dev);
@@ -507,11 +508,11 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
                           h, "pci-conf-idx", 4);
     memory_region_init_io(&h->data_mem, OBJECT(s), &pci_host_data_le_ops,
                           h, "pci-conf-data", 4);
-    memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
-                          "pci.reg", PPC440_REG_SIZE);
+    memory_region_init_io(regs, OBJECT(s), &pci_reg_ops, s, "pci-reg",
+                          PPC440_REG_SIZE);
     memory_region_add_subregion(&s->container, PCIC0_CFGADDR, &h->conf_mem);
     memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
-    memory_region_add_subregion(&s->container, PPC440_REG_BASE, &s->iomem);
+    memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
     sysbus_init_mmio(sbd, &s->container);
 }
 
Signature · 1 line
2.30.9
#3 lore raw

PATCH 2/13 ppc440: Add cpu link property to PCIe controller model

In reply to BALATON Zoltan

The PCIe controller model uses PPC DCRs but cannot be modeled with TYPE_PPC4xx_DCR_DEVICE as it derives from TYPE_PCIE_HOST_BRIDGE. Add a cpu link property to it similar to other DCR devices to allow registering DCRs from the device model.

---
 hw/ppc/ppc440_uc.c | 114 ++++++++++++++++++++++++---------------------
 1 file changed, 62 insertions(+), 52 deletions(-)
hw/ppc/ppc440_uc.c +62 -52
index 8eb985d714..b26c0cee1b 100644
@@ -779,6 +779,7 @@ struct PPC460EXPCIEState {
     MemoryRegion iomem;
     qemu_irq irq[4];
     int32_t dcrn_base;
+    PowerPCCPU *cpu;
 
     uint64_t cfg_base;
     uint32_t cfg_mask;
@@ -1001,6 +1002,58 @@ static void ppc460ex_set_irq(void *opaque, int irq_num, int level)
        qemu_set_irq(s->irq[irq_num], level);
 }
 
+static void ppc460ex_pcie_register_dcrs(PPC460EXPCIEState *s)
+{
+    CPUPPCState *env = &s->cpu->env;
+
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGBAH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGBAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGMSK, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGBAH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGBAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGMSK, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1BAH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1BAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1MSKH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1MSKL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2BAH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2BAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2MSKH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2MSKL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3BAH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3BAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3MSKH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3MSKL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGBAH, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGBAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGMSK, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_SPECIAL, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFG, s,
+                     &dcr_read_pcie, &dcr_write_pcie);
+}
+
 static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
 {
     PPC460EXPCIEState *s = PPC460EX_PCIE_HOST(dev);
@@ -1008,6 +1061,10 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
     int i, id;
     char buf[16];
 
+    if (!s->cpu) {
+        error_setg(errp, "cpu link property must be set");
+        return;
+    }
     switch (s->dcrn_base) {
     case DCRN_PCIE0_BASE:
         id = 0;
@@ -1028,10 +1085,13 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
     pci->bus = pci_register_root_bus(DEVICE(s), buf, ppc460ex_set_irq,
                                 pci_swizzle_map_irq_fn, s, &s->iomem,
                                 get_system_io(), 0, 4, TYPE_PCIE_BUS);
+    ppc460ex_pcie_register_dcrs(s);
 }
 
 static Property ppc460ex_pcie_props[] = {
     DEFINE_PROP_INT32("dcrn-base", PPC460EXPCIEState, dcrn_base, -1),
+    DEFINE_PROP_LINK("cpu", PPC460EXPCIEState, cpu, TYPE_POWERPC_CPU,
+                     PowerPCCPU *),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -1059,67 +1119,17 @@ static void ppc460ex_pcie_register(void)
 
 type_init(ppc460ex_pcie_register)
 
-static void ppc460ex_pcie_register_dcrs(PPC460EXPCIEState *s, CPUPPCState *env)
-{
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGBAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGBAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFGMSK, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGBAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGBAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_MSGMSK, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1BAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1BAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1MSKH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR1MSKL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2BAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2BAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2MSKH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR2MSKL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3BAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3BAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3MSKH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_OMR3MSKL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGBAH, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGBAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_REGMSK, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_SPECIAL, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-    ppc_dcr_register(env, s->dcrn_base + PEGPL_CFG, s,
-                     &dcr_read_pcie, &dcr_write_pcie);
-}
-
 void ppc460ex_pcie_init(PowerPCCPU *cpu)
 {
     DeviceState *dev;
 
     dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
     qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE0_BASE);
+    object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-    ppc460ex_pcie_register_dcrs(PPC460EX_PCIE_HOST(dev), &cpu->env);
 
     dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
     qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE1_BASE);
+    object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-    ppc460ex_pcie_register_dcrs(PPC460EX_PCIE_HOST(dev), &cpu->env);
 }
Signature · 1 line
2.30.9
#17 lore raw

PATCH 8/13 ppc440: Remove ppc460ex_pcie_init legacy init function

In reply to BALATON Zoltan

After previous changes we can now remove the legacy init function and move the device creation to board code.

---
 hw/ppc/ppc440.h         |  1 -
 hw/ppc/ppc440_uc.c      | 21 ---------------------
 hw/ppc/sam460ex.c       | 17 ++++++++++++++++-
 include/hw/ppc/ppc4xx.h |  1 +
 4 files changed, 17 insertions(+), 23 deletions(-)
hw/ppc/ppc440.h +0 -1
index ae42bcf0c8..909373fb38 100644
@@ -18,6 +18,5 @@ void ppc4xx_cpr_init(CPUPPCState *env);
 void ppc4xx_sdr_init(CPUPPCState *env);
 void ppc4xx_ahb_init(CPUPPCState *env);
 void ppc4xx_dma_init(CPUPPCState *env, int dcr_base);
-void ppc460ex_pcie_init(PowerPCCPU *cpu);
 
 #endif /* PPC440_H */
hw/ppc/ppc440_uc.c +0 -21
index 61782a5c1e..545f36edce 100644
@@ -770,7 +770,6 @@ void ppc4xx_dma_init(CPUPPCState *env, int dcr_base)
  */
 #include "hw/pci/pcie_host.h"
 
-#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, PPC460EX_PCIE_HOST)
 
 struct PPC460EXPCIEState {
@@ -799,9 +798,6 @@ struct PPC460EXPCIEState {
     uint32_t cfg;
 };
 
-#define DCRN_PCIE0_BASE 0x100
-#define DCRN_PCIE1_BASE 0x120
-
 enum {
     PEGPL_CFGBAH = 0x0,
     PEGPL_CFGBAL,
@@ -1096,20 +1092,3 @@ static void ppc460ex_pcie_register(void)
 }
 
 type_init(ppc460ex_pcie_register)
-
-void ppc460ex_pcie_init(PowerPCCPU *cpu)
-{
-    DeviceState *dev;
-
-    dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
-    qdev_prop_set_int32(dev, "busnum", 0);
-    qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE0_BASE);
-    object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
-    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-
-    dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
-    qdev_prop_set_int32(dev, "busnum", 1);
-    qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE1_BASE);
-    object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
-    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-}
hw/ppc/sam460ex.c +16 -1
index f098226974..d446cfc37b 100644
@@ -45,6 +45,9 @@
 /* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \
      if=updater/updater-460 of=u-boot-sam460-20100605.bin */
 
+#define PCIE0_DCRN_BASE 0x100
+#define PCIE1_DCRN_BASE 0x120
+
 /* from Sam460 U-Boot include/configs/Sam460ex.h */
 #define FLASH_BASE             0xfff00000
 #define FLASH_BASE_H           0x4
@@ -421,8 +424,20 @@ static void sam460ex_init(MachineState *machine)
     usb_create_simple(usb_bus_find(-1), "usb-kbd");
     usb_create_simple(usb_bus_find(-1), "usb-mouse");
 
+    /* PCIe buses */
+    dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
+    qdev_prop_set_int32(dev, "busnum", 0);
+    qdev_prop_set_int32(dev, "dcrn-base", PCIE0_DCRN_BASE);
+    object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+
+    dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
+    qdev_prop_set_int32(dev, "busnum", 1);
+    qdev_prop_set_int32(dev, "dcrn-base", PCIE1_DCRN_BASE);
+    object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+
     /* PCI bus */
-    ppc460ex_pcie_init(cpu);
     /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
     dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000,
                                qdev_get_gpio_in(uic[1], 0));
include/hw/ppc/ppc4xx.h +1 -0
index f8c86e09ec..39ca602442 100644
@@ -30,6 +30,7 @@
 #include "hw/sysbus.h"
 
 #define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost"
+#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 
 /*
  * Generic DCR device
Signature · 1 line
2.30.9
#15 lore raw

PATCH 7/13 ppc440: Add busnum property to PCIe controller model

In reply to BALATON Zoltan

Instead of guessing controller number from dcrn_base add a property so the device does not need knowledge about where it is used.

---
 hw/ppc/ppc440_uc.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)
hw/ppc/ppc440_uc.c +11 -14
index 0c5d999878..61782a5c1e 100644
@@ -779,6 +779,7 @@ struct PPC460EXPCIEState {
     MemoryRegion busmem;
     MemoryRegion iomem;
     qemu_irq irq[4];
+    int32_t num;
     int32_t dcrn_base;
     PowerPCCPU *cpu;
 
@@ -1039,32 +1040,25 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
 {
     PPC460EXPCIEState *s = PPC460EX_PCIE_HOST(dev);
     PCIHostState *pci = PCI_HOST_BRIDGE(dev);
-    int i, id;
-    char buf[16];
+    int i;
+    char buf[20];
 
     if (!s->cpu) {
         error_setg(errp, "cpu link property must be set");
         return;
     }
-    switch (s->dcrn_base) {
-    case DCRN_PCIE0_BASE:
-        id = 0;
-        break;
-    case DCRN_PCIE1_BASE:
-        id = 1;
-        break;
-    default:
-        error_setg(errp, "invalid PCIe DCRN base");
+    if (s->num < 0 || s->dcrn_base < 0) {
+        error_setg(errp, "busnum and dcrn-base properties must be set");
         return;
     }
-    snprintf(buf, sizeof(buf), "pcie%d-mem", id);
+    snprintf(buf, sizeof(buf), "pcie%d-mem", s->num);
     memory_region_init(&s->busmem, OBJECT(s), buf, UINT64_MAX);
-    snprintf(buf, sizeof(buf), "pcie%d-io", id);
+    snprintf(buf, sizeof(buf), "pcie%d-io", s->num);
     memory_region_init(&s->iomem, OBJECT(s), buf, 0x10000);
     for (i = 0; i < 4; i++) {
         sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]);
     }
-    snprintf(buf, sizeof(buf), "pcie.%d", id);
+    snprintf(buf, sizeof(buf), "pcie.%d", s->num);
     pci->bus = pci_register_root_bus(DEVICE(s), buf, ppc460ex_set_irq,
                                 pci_swizzle_map_irq_fn, s, &s->busmem,
                                 &s->iomem, 0, 4, TYPE_PCIE_BUS);
@@ -1072,6 +1066,7 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
 }
 
 static Property ppc460ex_pcie_props[] = {
+    DEFINE_PROP_INT32("busnum", PPC460EXPCIEState, num, -1),
     DEFINE_PROP_INT32("dcrn-base", PPC460EXPCIEState, dcrn_base, -1),
     DEFINE_PROP_LINK("cpu", PPC460EXPCIEState, cpu, TYPE_POWERPC_CPU,
                      PowerPCCPU *),
@@ -1107,11 +1102,13 @@ void ppc460ex_pcie_init(PowerPCCPU *cpu)
     DeviceState *dev;
 
     dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
+    qdev_prop_set_int32(dev, "busnum", 0);
     qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE0_BASE);
     object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
+    qdev_prop_set_int32(dev, "busnum", 1);
     qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE1_BASE);
     object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
Signature · 1 line
2.30.9
#14 lore raw

PATCH 6/13 sam460ex: Remove address_space_mem local variable

In reply to BALATON Zoltan

Some places already use get_system_memory() directly so replace the remaining uses and drop the local variable.

---
 hw/ppc/sam460ex.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
hw/ppc/sam460ex.c +4 -4
index aaa8d2f4a5..f098226974 100644
@@ -266,7 +266,6 @@ static void main_cpu_reset(void *opaque)
 
 static void sam460ex_init(MachineState *machine)
 {
-    MemoryRegion *address_space_mem = get_system_memory();
     MemoryRegion *isa = g_new(MemoryRegion, 1);
     MemoryRegion *l2cache_ram = g_new(MemoryRegion, 1);
     DeviceState *uic[4];
@@ -406,7 +405,8 @@ static void sam460ex_init(MachineState *machine)
     /* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */
     memory_region_init_ram(l2cache_ram, NULL, "ppc440.l2cache_ram", 256 * KiB,
                            &error_abort);
-    memory_region_add_subregion(address_space_mem, 0x400000000LL, l2cache_ram);
+    memory_region_add_subregion(get_system_memory(), 0x400000000LL,
+                                l2cache_ram);
 
     /* USB */
     sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400,
@@ -444,13 +444,13 @@ static void sam460ex_init(MachineState *machine)
     /* SoC has 4 UARTs
      * but board has only one wired and two are present in fdt */
     if (serial_hd(0) != NULL) {
-        serial_mm_init(address_space_mem, 0x4ef600300, 0,
+        serial_mm_init(get_system_memory(), 0x4ef600300, 0,
                        qdev_get_gpio_in(uic[1], 1),
                        PPC_SERIAL_MM_BAUDBASE, serial_hd(0),
                        DEVICE_BIG_ENDIAN);
     }
     if (serial_hd(1) != NULL) {
-        serial_mm_init(address_space_mem, 0x4ef600400, 0,
+        serial_mm_init(get_system_memory(), 0x4ef600400, 0,
                        qdev_get_gpio_in(uic[0], 1),
                        PPC_SERIAL_MM_BAUDBASE, serial_hd(1),
                        DEVICE_BIG_ENDIAN);
Signature · 1 line
2.30.9
#21 lore raw

PATCH 10/13 ppc4xx_pci: Add define for ppc4xx-host-bridge type name

In reply to BALATON Zoltan

Add a QOM type name define for ppc4xx-host-bridge in the common header and replace direct use of the string name with the constant.

---
 hw/ppc/ppc440_pcix.c    | 3 ++-
 hw/ppc/ppc4xx_pci.c     | 4 ++--
 include/hw/ppc/ppc4xx.h | 1 +
 3 files changed, 5 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +2 -1
index f10f93c533..dfec25ac83 100644
@@ -495,7 +495,8 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
                          ppc440_pcix_map_irq, &s->irq, &s->busmem,
                          get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
 
-    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0), "ppc4xx-host-bridge");
+    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0),
+                               TYPE_PPC4xx_HOST_BRIDGE);
 
     memory_region_init(&s->bm, OBJECT(s), "bm-ppc440-pcix", UINT64_MAX);
     memory_region_add_subregion(&s->bm, 0x0, &s->busmem);
hw/ppc/ppc4xx_pci.c +2 -2
index fbdf8266d8..6652119008 100644
@@ -333,7 +333,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, Error **errp)
                               TYPE_PCI_BUS);
     h->bus = b;
 
-    pci_create_simple(b, 0, "ppc4xx-host-bridge");
+    pci_create_simple(b, 0, TYPE_PPC4xx_HOST_BRIDGE);
 
     /* XXX split into 2 memory regions, one for config space, one for regs */
     memory_region_init(&s->container, OBJECT(s), "pci-container", PCI_ALL_SIZE);
@@ -367,7 +367,7 @@ static void ppc4xx_host_bridge_class_init(ObjectClass *klass, void *data)
 }
 
 static const TypeInfo ppc4xx_host_bridge_info = {
-    .name          = "ppc4xx-host-bridge",
+    .name          = TYPE_PPC4xx_HOST_BRIDGE,
     .parent        = TYPE_PCI_DEVICE,
     .instance_size = sizeof(PCIDevice),
     .class_init    = ppc4xx_host_bridge_class_init,
include/hw/ppc/ppc4xx.h +1 -0
index e053b9751b..766d575e86 100644
@@ -29,6 +29,7 @@
 #include "exec/memory.h"
 #include "hw/sysbus.h"
 
+#define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"
 #define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"
 #define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 
Signature · 1 line
2.30.9
#0 lore raw

cover PPC440 devices misc clean up

These are some small misc clean ups to PPC440 related device models which is all I have ready for now.

BALATON Zoltan (13):
ppc440: Change ppc460ex_pcie_init() parameter type
ppc440: Add cpu link property to PCIe controller model
ppc440: Add a macro to shorten PCIe controller DCR registration
ppc440: Rename local variable in dcr_read_pcie()
ppc440: Stop using system io region for PCIe buses
sam460ex: Remove address_space_mem local variable
ppc440: Add busnum property to PCIe controller model
ppc440: Remove ppc460ex_pcie_init legacy init function
ppc4xx_pci: Rename QOM type name define
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc440_pcix: Rename QOM type define abd move it to common header
ppc440_pcix: Don't use iomem for regs
ppc440_pcix: Stop using system io region for PCI bus

 hw/ppc/ppc440.h         |   1 -
 hw/ppc/ppc440_bamboo.c  |   3 +-
 hw/ppc/ppc440_pcix.c    |  27 +++---
 hw/ppc/ppc440_uc.c      | 190 +++++++++++++++++-----------------------
 hw/ppc/ppc4xx_pci.c     |  10 +--
 hw/ppc/sam460ex.c       |  33 ++++---
 include/hw/ppc/ppc4xx.h |   5 +-
 7 files changed, 127 insertions(+), 142 deletions(-)
Signature · 1 line
2.30.9
#1 lore raw

PATCH 1/13 ppc440: Change ppc460ex_pcie_init() parameter type

Change parameter of ppc460ex_pcie_init() from env to cpu to allow further refactoring.

---
 hw/ppc/ppc440.h    | 2 +-
 hw/ppc/ppc440_uc.c | 7 ++++---
 hw/ppc/sam460ex.c  | 2 +-
 3 files changed, 6 insertions(+), 5 deletions(-)
hw/ppc/ppc440.h +1 -1
index 7c24db8504..ae42bcf0c8 100644
@@ -18,6 +18,6 @@ void ppc4xx_cpr_init(CPUPPCState *env);
 void ppc4xx_sdr_init(CPUPPCState *env);
 void ppc4xx_ahb_init(CPUPPCState *env);
 void ppc4xx_dma_init(CPUPPCState *env, int dcr_base);
-void ppc460ex_pcie_init(CPUPPCState *env);
+void ppc460ex_pcie_init(PowerPCCPU *cpu);
 
 #endif /* PPC440_H */
hw/ppc/ppc440_uc.c +4 -3
index 651263926e..8eb985d714 100644
@@ -17,6 +17,7 @@
 #include "hw/qdev-properties.h"
 #include "hw/pci/pci.h"
 #include "sysemu/reset.h"
+#include "cpu.h"
 #include "ppc440.h"
 
 /*****************************************************************************/
@@ -1108,17 +1109,17 @@ static void ppc460ex_pcie_register_dcrs(PPC460EXPCIEState *s, CPUPPCState *env)
                      &dcr_read_pcie, &dcr_write_pcie);
 }
 
-void ppc460ex_pcie_init(CPUPPCState *env)
+void ppc460ex_pcie_init(PowerPCCPU *cpu)
 {
     DeviceState *dev;
 
     dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
     qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE0_BASE);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-    ppc460ex_pcie_register_dcrs(PPC460EX_PCIE_HOST(dev), env);
+    ppc460ex_pcie_register_dcrs(PPC460EX_PCIE_HOST(dev), &cpu->env);
 
     dev = qdev_new(TYPE_PPC460EX_PCIE_HOST);
     qdev_prop_set_int32(dev, "dcrn-base", DCRN_PCIE1_BASE);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-    ppc460ex_pcie_register_dcrs(PPC460EX_PCIE_HOST(dev), env);
+    ppc460ex_pcie_register_dcrs(PPC460EX_PCIE_HOST(dev), &cpu->env);
 }
hw/ppc/sam460ex.c +1 -1
index cf065aae0e..aaa8d2f4a5 100644
@@ -422,7 +422,7 @@ static void sam460ex_init(MachineState *machine)
     usb_create_simple(usb_bus_find(-1), "usb-mouse");
 
     /* PCI bus */
-    ppc460ex_pcie_init(env);
+    ppc460ex_pcie_init(cpu);
     /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
     dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000,
                                qdev_get_gpio_in(uic[1], 0));
Signature · 1 line
2.30.9
Reviewed-by on v1 2/13
#4 lore raw

Re: [PATCH 02/13] ppc440: Add cpu link property to PCIe controller model

In reply to BALATON Zoltan
Quoted 9 lines · BALATON Zoltan

The PCIe controller model uses PPC DCRs but cannot be modeled with TYPE_PPC4xx_DCR_DEVICE as it derives from TYPE_PCIE_HOST_BRIDGE. Add a cpu link property to it similar to other DCR devices to allow registering DCRs from the device model.

---
  hw/ppc/ppc440_uc.c | 114 ++++++++++++++++++++++++---------------------
  1 file changed, 62 insertions(+), 52 deletions(-)
Reviewed-by on v1 1/13
#2 lore raw

Re: [PATCH 01/13] ppc440: Change ppc460ex_pcie_init() parameter type

In reply to BALATON Zoltan
Quoted 9 lines · BALATON Zoltan

Change parameter of ppc460ex_pcie_init() from env to cpu to allow further refactoring.

---
  hw/ppc/ppc440.h    | 2 +-
  hw/ppc/ppc440_uc.c | 7 ++++---
  hw/ppc/sam460ex.c  | 2 +-
  3 files changed, 6 insertions(+), 5 deletions(-)

FWIW I'd rather move ppc460ex_pcie_register_dcrs() in this patch. Regardless:

Reviewed-by on v1 3/13
#6 lore raw

Re: [PATCH 03/13] ppc440: Add a macro to shorten PCIe controller DCR registration

In reply to BALATON Zoltan

hw/ppc/ppc440_uc.c static void ppc460ex_set_irq(void *opaque, int irq_num, int level) · line 1006

Quoted 11 lines · BALATON Zoltan

It is more readable to wrap the complex call to ppc_dcr_register in a macro when needed repeatedly.

---
  hw/ppc/ppc440_uc.c | 76 +++++++++++++++++-----------------------------
  1 file changed, 28 insertions(+), 48 deletions(-)
hw/ppc/ppc440_uc.c +2 -0
+#define PPC440_PCIE_DCR(s, dcrn) \
+    ppc_dcr_register(&(s)->cpu->env, (s)->dcrn_base + (dcrn), s, \

'(s), \'

hw/ppc/ppc440_uc.c static void ppc460ex_set_irq(void *opaque, int irq_num, int level) · line 1009

Quoted 3 lines
hw/ppc/ppc440_uc.c +3 -0
+                     &dcr_read_pcie, &dcr_write_pcie)
+
+
Reviewed-by on v1 4/13
#10 lore raw

Re: [PATCH 04/13] ppc440: Rename local variable in dcr_read_pcie()

In reply to BALATON Zoltan
Quoted 7 lines · BALATON Zoltan

Rename local variable storing state struct in dcr_read_pcie() for brevity and consistency with other functions.

---
  hw/ppc/ppc440_uc.c | 50 +++++++++++++++++++++++-----------------------
  1 file changed, 25 insertions(+), 25 deletions(-)
Reviewed-by on v1 5/13
#12 lore raw

Re: [PATCH 05/13] ppc440: Stop using system io region for PCIe buses

In reply to BALATON Zoltan
Quoted 2 lines · BALATON Zoltan

Add separate memory regions for the mem and io spaces of the PCIe bus to avoid different buses using the same system io region.

"Reduce the I/O space to 64K."

Quoted 18 lines
---
  hw/ppc/ppc440_uc.c | 9 ++++++---
  1 file changed, 6 insertions(+), 3 deletions(-)
hw/ppc/ppc440_uc.c +1 -0
index 38ee27f437..0c5d999878 100644
@@ -776,6 +776,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, PPC460EX_PCIE_HOST)
  struct PPC460EXPCIEState {
      PCIExpressHost host;
 
+    MemoryRegion busmem;
      MemoryRegion iomem;
      qemu_irq irq[4];
      int32_t dcrn_base;

hw/ppc/ppc440_uc.c static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp) · line 1063

Quoted 8 lines
hw/ppc/ppc440_uc.c +3 -1
@@ -1056,15 +1057,17 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)
          error_setg(errp, "invalid PCIe DCRN base");
          return;
      }
+    snprintf(buf, sizeof(buf), "pcie%d-mem", id);
+    memory_region_init(&s->busmem, OBJECT(s), buf, UINT64_MAX);
      snprintf(buf, sizeof(buf), "pcie%d-io", id);
-    memory_region_init(&s->iomem, OBJECT(s), buf, UINT64_MAX);
+    memory_region_init(&s->iomem, OBJECT(s), buf, 0x10000);

64 * KiB

hw/ppc/ppc440_uc.c static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp) · line 1073

Quoted 12 lines
hw/ppc/ppc440_uc.c +2 -2
      for (i = 0; i < 4; i++) {
          sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]);
      }
      snprintf(buf, sizeof(buf), "pcie.%d", id);
      pci->bus = pci_register_root_bus(DEVICE(s), buf, ppc460ex_set_irq,
-                                pci_swizzle_map_irq_fn, s, &s->iomem,
-                                get_system_io(), 0, 4, TYPE_PCIE_BUS);
+                                pci_swizzle_map_irq_fn, s, &s->busmem,
+                                &s->iomem, 0, 4, TYPE_PCIE_BUS);
      ppc460ex_pcie_register_dcrs(s);
  }
 

With the changes addressed:

Reviewed-by on v1 7/13
#16 lore raw

Re: [PATCH 07/13] ppc440: Add busnum property to PCIe controller model

In reply to BALATON Zoltan
Quoted 7 lines · BALATON Zoltan

Instead of guessing controller number from dcrn_base add a property so the device does not need knowledge about where it is used.

---
  hw/ppc/ppc440_uc.c | 25 +++++++++++--------------
  1 file changed, 11 insertions(+), 14 deletions(-)
Reviewed-by on v1 8/13
#18 lore raw

Re: [PATCH 08/13] ppc440: Remove ppc460ex_pcie_init legacy init function

In reply to BALATON Zoltan
Quoted 10 lines · BALATON Zoltan

After previous changes we can now remove the legacy init function and move the device creation to board code.

---
  hw/ppc/ppc440.h         |  1 -
  hw/ppc/ppc440_uc.c      | 21 ---------------------
  hw/ppc/sam460ex.c       | 17 ++++++++++++++++-
  include/hw/ppc/ppc4xx.h |  1 +
  4 files changed, 17 insertions(+), 23 deletions(-)
#20 lore raw

Re: [PATCH 09/13] ppc4xx_pci: Rename QOM type name define

In reply to BALATON Zoltan
Quoted 61 lines · BALATON Zoltan

Rename the TYPE_PPC4xx_PCI_HOST_BRIDGE define and its string value to match each other and other similar types and to avoid confusion with "ppc4xx-host-bridge" type defined in same file.

---
  hw/ppc/ppc440_bamboo.c  | 3 +--
  hw/ppc/ppc4xx_pci.c     | 6 +++---
  include/hw/ppc/ppc4xx.h | 2 +-
  3 files changed, 5 insertions(+), 6 deletions(-)
hw/ppc/ppc440_bamboo.c +1 -2
index f061b8cf3b..45f409c838 100644
@@ -205,8 +205,7 @@ static void bamboo_init(MachineState *machine)
      ppc4xx_sdram_ddr_enable(PPC4xx_SDRAM_DDR(dev));
 
      /* PCI */
-    dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE,
-                                PPC440EP_PCI_CONFIG,
+    dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST, PPC440EP_PCI_CONFIG,
                                  qdev_get_gpio_in(uicdev, pci_irq_nrs[0]),
                                  qdev_get_gpio_in(uicdev, pci_irq_nrs[1]),
                                  qdev_get_gpio_in(uicdev, pci_irq_nrs[2]),
hw/ppc/ppc4xx_pci.c +3 -3
index 1d4a50fa7c..fbdf8266d8 100644
@@ -46,7 +46,7 @@ struct PCITargetMap {
      uint32_t la;
  };
 
-OBJECT_DECLARE_SIMPLE_TYPE(PPC4xxPCIState, PPC4xx_PCI_HOST_BRIDGE)
+OBJECT_DECLARE_SIMPLE_TYPE(PPC4xxPCIState, PPC4xx_PCI_HOST)
 
  #define PPC4xx_PCI_NR_PMMS 3
  #define PPC4xx_PCI_NR_PTMS 2
@@ -321,7 +321,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, Error **errp)
      int i;
 
      h = PCI_HOST_BRIDGE(dev);
-    s = PPC4xx_PCI_HOST_BRIDGE(dev);
+    s = PPC4xx_PCI_HOST(dev);
 
      for (i = 0; i < ARRAY_SIZE(s->irq); i++) {
          sysbus_init_irq(sbd, &s->irq[i]);
@@ -386,7 +386,7 @@ static void ppc4xx_pcihost_class_init(ObjectClass *klass, void *data)
  }
 
  static const TypeInfo ppc4xx_pcihost_info = {
-    .name          = TYPE_PPC4xx_PCI_HOST_BRIDGE,
+    .name          = TYPE_PPC4xx_PCI_HOST,
      .parent        = TYPE_PCI_HOST_BRIDGE,
      .instance_size = sizeof(PPC4xxPCIState),
      .class_init    = ppc4xx_pcihost_class_init,
include/hw/ppc/ppc4xx.h +0 -0
index 39ca602442..e053b9751b 100644

include/hw/ppc/ppc4xx.h line 32

Quoted 5 lines
include/hw/ppc/ppc4xx.h +1 -1
@@ -29,7 +29,7 @@
  #include "exec/memory.h"
  #include "hw/sysbus.h"
 
-#define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost"
+#define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"

This is the host bridge however... Maybe we want to rename:

#define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pci-hostbridge"

#22 lore raw

Re: [PATCH 10/13] ppc4xx_pci: Add define for ppc4xx-host-bridge type name

In reply to BALATON Zoltan
Quoted 51 lines · BALATON Zoltan

Add a QOM type name define for ppc4xx-host-bridge in the common header and replace direct use of the string name with the constant.

---
  hw/ppc/ppc440_pcix.c    | 3 ++-
  hw/ppc/ppc4xx_pci.c     | 4 ++--
  include/hw/ppc/ppc4xx.h | 1 +
  3 files changed, 5 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +2 -1
index f10f93c533..dfec25ac83 100644
@@ -495,7 +495,8 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
                           ppc440_pcix_map_irq, &s->irq, &s->busmem,
                           get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
 
-    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0), "ppc4xx-host-bridge");
+    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0),
+                               TYPE_PPC4xx_HOST_BRIDGE);
 
      memory_region_init(&s->bm, OBJECT(s), "bm-ppc440-pcix", UINT64_MAX);
      memory_region_add_subregion(&s->bm, 0x0, &s->busmem);
hw/ppc/ppc4xx_pci.c +2 -2
index fbdf8266d8..6652119008 100644
@@ -333,7 +333,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, Error **errp)
                                TYPE_PCI_BUS);
      h->bus = b;
 
-    pci_create_simple(b, 0, "ppc4xx-host-bridge");
+    pci_create_simple(b, 0, TYPE_PPC4xx_HOST_BRIDGE);
 
      /* XXX split into 2 memory regions, one for config space, one for regs */
      memory_region_init(&s->container, OBJECT(s), "pci-container", PCI_ALL_SIZE);
@@ -367,7 +367,7 @@ static void ppc4xx_host_bridge_class_init(ObjectClass *klass, void *data)
  }
 
  static const TypeInfo ppc4xx_host_bridge_info = {
-    .name          = "ppc4xx-host-bridge",
+    .name          = TYPE_PPC4xx_HOST_BRIDGE,
      .parent        = TYPE_PCI_DEVICE,
      .instance_size = sizeof(PCIDevice),
      .class_init    = ppc4xx_host_bridge_class_init,
include/hw/ppc/ppc4xx.h +0 -0
index e053b9751b..766d575e86 100644

include/hw/ppc/ppc4xx.h line 32

Quoted 4 lines
include/hw/ppc/ppc4xx.h +1 -0
@@ -29,6 +29,7 @@
  #include "exec/memory.h"
  #include "hw/sysbus.h"
 
+#define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"

This is the function #0 of the host bridge, maybe:

#define TYPE_PPC4xx_HOST_BRIDGE_FN0 "ppc4xx-pci-host-bridge-fn0"

Quoted 3 lines
include/hw/ppc/ppc4xx.h +0 -0
  #define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"
  #define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 
#25 lore raw

Re: [PATCH 11/13] ppc440_pcix: Rename QOM type define abd move it to common header

In reply to BALATON Zoltan
Quoted 70 lines · BALATON Zoltan

Rename TYPE_PPC440_PCIX_HOST_BRIDGE to better match its string value, move it to common header and use it also in sam460ex to replace hard coded type name.

---
  hw/ppc/ppc440_pcix.c    | 9 ++++-----
  hw/ppc/sam460ex.c       | 2 +-
  include/hw/ppc/ppc4xx.h | 1 +
  3 files changed, 6 insertions(+), 6 deletions(-)
hw/ppc/ppc440_pcix.c +4 -5
index dfec25ac83..adfecf1e76 100644
@@ -44,8 +44,7 @@ struct PLBInMap {
      MemoryRegion mr;
  };
 
-#define TYPE_PPC440_PCIX_HOST_BRIDGE "ppc440-pcix-host"
-OBJECT_DECLARE_SIMPLE_TYPE(PPC440PCIXState, PPC440_PCIX_HOST_BRIDGE)
+OBJECT_DECLARE_SIMPLE_TYPE(PPC440PCIXState, PPC440_PCIX_HOST)
 
  #define PPC440_PCIX_NR_POMS 3
  #define PPC440_PCIX_NR_PIMS 3
@@ -397,7 +396,7 @@ static const MemoryRegionOps pci_reg_ops = {
 
  static void ppc440_pcix_reset(DeviceState *dev)
  {
-    struct PPC440PCIXState *s = PPC440_PCIX_HOST_BRIDGE(dev);
+    struct PPC440PCIXState *s = PPC440_PCIX_HOST(dev);
      int i;
 
      for (i = 0; i < PPC440_PCIX_NR_POMS; i++) {
@@ -487,7 +486,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
      PCIHostState *h;
 
      h = PCI_HOST_BRIDGE(dev);
-    s = PPC440_PCIX_HOST_BRIDGE(dev);
+    s = PPC440_PCIX_HOST(dev);
 
      sysbus_init_irq(sbd, &s->irq);
      memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
@@ -525,7 +524,7 @@ static void ppc440_pcix_class_init(ObjectClass *klass, void *data)
  }
 
  static const TypeInfo ppc440_pcix_info = {
-    .name          = TYPE_PPC440_PCIX_HOST_BRIDGE,
+    .name          = TYPE_PPC440_PCIX_HOST,
      .parent        = TYPE_PCI_HOST_BRIDGE,
      .instance_size = sizeof(PPC440PCIXState),
      .class_init    = ppc440_pcix_class_init,
hw/ppc/sam460ex.c +1 -1
index d446cfc37b..8d0e551d14 100644
@@ -439,7 +439,7 @@ static void sam460ex_init(MachineState *machine)
 
      /* PCI bus */
      /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */
-    dev = sysbus_create_simple("ppc440-pcix-host", 0xc0ec00000,
+    dev = sysbus_create_simple(TYPE_PPC440_PCIX_HOST, 0xc0ec00000,
                                 qdev_get_gpio_in(uic[1], 0));
      pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0"));
 
include/hw/ppc/ppc4xx.h +0 -0
index 766d575e86..ea7740239b 100644

include/hw/ppc/ppc4xx.h line 35

Quoted 5 lines
include/hw/ppc/ppc4xx.h +1 -0
@@ -31,6 +31,7 @@
 
  #define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"
  #define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"
+#define TYPE_PPC440_PCIX_HOST "ppc440-pcix-host"
  #define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"

Again, this is a host bridge, why not name it HOST_BRIDGE?

#27 lore raw

Re: [PATCH 12/13] ppc440_pcix: Don't use iomem for regs

In reply to BALATON Zoltan
Quoted 14 lines · BALATON Zoltan

The iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.

---
  hw/ppc/ppc440_pcix.c | 7 ++++---
  1 file changed, 4 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +0 -0
index adfecf1e76..ee2dc44f67 100644

hw/ppc/ppc440_pcix.c static void ppc440_pcix_realize(DeviceState *dev, Error **errp) · line 487

Quoted 4 lines
hw/ppc/ppc440_pcix.c +1 -0
@@ -484,6 +484,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
      SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
      PPC440PCIXState *s;
      PCIHostState *h;
+    MemoryRegion *regs = g_new(MemoryRegion, 1);

Why not hold it within PPC440PCIXState?

Quoted 17 lines
hw/ppc/ppc440_pcix.c +3 -3
      h = PCI_HOST_BRIDGE(dev);
      s = PPC440_PCIX_HOST(dev);
@@ -507,11 +508,11 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
                            h, "pci-conf-idx", 4);
      memory_region_init_io(&h->data_mem, OBJECT(s), &pci_host_data_le_ops,
                            h, "pci-conf-data", 4);
-    memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
-                          "pci.reg", PPC440_REG_SIZE);
+    memory_region_init_io(regs, OBJECT(s), &pci_reg_ops, s, "pci-reg",
+                          PPC440_REG_SIZE);
      memory_region_add_subregion(&s->container, PCIC0_CFGADDR, &h->conf_mem);
      memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
-    memory_region_add_subregion(&s->container, PPC440_REG_BASE, &s->iomem);
+    memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
      sysbus_init_mmio(sbd, &s->container);
  }
 
Reviewed-by on v1 13/13
#32 lore raw

Re: [PATCH 13/13] ppc440_pcix: Stop using system io region for PCI bus

In reply to BALATON Zoltan
Quoted 2 lines · BALATON Zoltan

Use the iomem region for the PCI io space and map it directly from the board without an intermediate alias that is not really needed.

"Reduce the I/O region to 64K."

Quoted 11 lines
---
  hw/ppc/ppc440_pcix.c | 8 +++++---
  hw/ppc/sam460ex.c    | 6 +-----
  2 files changed, 6 insertions(+), 8 deletions(-)
hw/ppc/ppc440_pcix.c +0 -0
index ee2dc44f67..cca8a72c72 100644

hw/ppc/ppc440_pcix.c static void ppc440_pcix_realize(DeviceState *dev, Error **errp) · line 494

Quoted 6 lines
hw/ppc/ppc440_pcix.c +2 -1
@@ -490,10 +490,11 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
      s = PPC440_PCIX_HOST(dev);
 
      sysbus_init_irq(sbd, &s->irq);
-    memory_region_init(&s->busmem, OBJECT(dev), "pci bus memory", UINT64_MAX);
+    memory_region_init(&s->busmem, OBJECT(dev), "pci-mem", UINT64_MAX);
+    memory_region_init(&s->iomem, OBJECT(dev), "pci-io", 0x10000);

64 * KiB

Quoted 9 lines
hw/ppc/ppc440_pcix.c +2 -2
      h->bus = pci_register_root_bus(dev, NULL, ppc440_pcix_set_irq,
-                         ppc440_pcix_map_irq, &s->irq, &s->busmem,
-                         get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
+                         ppc440_pcix_map_irq, &s->irq, &s->busmem, &s->iomem,
+                         PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS);
 
      s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0),
                                 TYPE_PPC4xx_HOST_BRIDGE);

hw/ppc/ppc440_pcix.c static void ppc440_pcix_realize(DeviceState *dev, Error **errp) · line 519

Quoted 5 lines
hw/ppc/ppc440_pcix.c +1 -0
@@ -514,6 +515,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)
      memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
      memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
      sysbus_init_mmio(sbd, &s->container);
+    sysbus_init_mmio(sbd, &s->iomem);
  }

With the changes requested:

#7 lore raw

Re: [PATCH 03/13] ppc440: Add a macro to shorten PCIe controller DCR registration

In reply to Philippe Mathieu-Daudé
Quoted 10 lines · Philippe Mathieu-Daudé
Quoted 7 lines · BALATON Zoltan

It is more readable to wrap the complex call to ppc_dcr_register in a macro when needed repeatedly.

---
  hw/ppc/ppc440_uc.c | 76 +++++++++++++++++-----------------------------
  1 file changed, 28 insertions(+), 48 deletions(-)
Quoted 4 lines

hw/ppc/ppc440_uc.c static void ppc460ex_set_irq(void *opaque, int irq_num, int level) · line 1006

Quoted 2 lines
hw/ppc/ppc440_uc.c +2 -0
+#define PPC440_PCIE_DCR(s, dcrn) \
+    ppc_dcr_register(&(s)->cpu->env, (s)->dcrn_base + (dcrn), s, \

'(s), \'

The parenthesis here would be superfluous as it stands alone in a function parameter between commas so no matter what you substitue here should not have an unwanted side effect (unless it has a comma but that's an error anyway) so maybe this is not needed.

Quoted 5 lines

hw/ppc/ppc440_uc.c static void ppc460ex_set_irq(void *opaque, int irq_num, int level) · line 1009

Quoted 3 lines
hw/ppc/ppc440_uc.c +3 -0
+                     &dcr_read_pcie, &dcr_write_pcie)
+
+

Thanks for the quick review, I'll post a v2 in a few days to wait a bit if anobody else has any other request.

Regards,
BALATON Zoltan

#23 lore raw

Re: [PATCH 10/13] ppc4xx_pci: Add define for ppc4xx-host-bridge type name

In reply to Philippe Mathieu-Daudé
Quoted 61 lines · Philippe Mathieu-Daudé
Quoted 54 lines · BALATON Zoltan

Add a QOM type name define for ppc4xx-host-bridge in the common header and replace direct use of the string name with the constant.

---
  hw/ppc/ppc440_pcix.c    | 3 ++-
  hw/ppc/ppc4xx_pci.c     | 4 ++--
  include/hw/ppc/ppc4xx.h | 1 +
  3 files changed, 5 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +2 -0
index f10f93c533..dfec25ac83 100644
@@ -495,7 +495,8 @@ static void ppc440_pcix_realize(DeviceState *dev, Error 
 **errp)
                           ppc440_pcix_map_irq, &s->irq, &s->busmem,
                           get_system_io(), PCI_DEVFN(0, 0), 1, 
 TYPE_PCI_BUS);
  -    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0), 
 "ppc4xx-host-bridge");
+    s->dev = pci_create_simple(h->bus, PCI_DEVFN(0, 0),
+                               TYPE_PPC4xx_HOST_BRIDGE);
        memory_region_init(&s->bm, OBJECT(s), "bm-ppc440-pcix", 
UINT64_MAX);
      memory_region_add_subregion(&s->bm, 0x0, &s->busmem);
hw/ppc/ppc4xx_pci.c +1 -0
index fbdf8266d8..6652119008 100644
@@ -333,7 +333,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, 
 Error **errp)
                                TYPE_PCI_BUS);
      h->bus = b;
  -    pci_create_simple(b, 0, "ppc4xx-host-bridge");
+    pci_create_simple(b, 0, TYPE_PPC4xx_HOST_BRIDGE);
        /* XXX split into 2 memory regions, one for config space, one for 

regs */

      memory_region_init(&s->container, OBJECT(s), "pci-container", 

PCI_ALL_SIZE);

hw/ppc/ppc4xx_pci.c +1 -1
@@ -367,7 +367,7 @@ static void ppc4xx_host_bridge_class_init(ObjectClass 
 *klass, void *data)
  }
    static const TypeInfo ppc4xx_host_bridge_info = {
-    .name          = "ppc4xx-host-bridge",
+    .name          = TYPE_PPC4xx_HOST_BRIDGE,
      .parent        = TYPE_PCI_DEVICE,
      .instance_size = sizeof(PCIDevice),
      .class_init    = ppc4xx_host_bridge_class_init,
include/hw/ppc/ppc4xx.h +0 -0
index e053b9751b..766d575e86 100644

include/hw/ppc/ppc4xx.h line 31

Quoted 3 lines
include/hw/ppc/ppc4xx.h +0 -0
@@ -29,6 +29,7 @@
  #include "exec/memory.h"
  #include "hw/sysbus.h"
  +#define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"

This is the function #0 of the host bridge, maybe:

Quoted 1 line

#define TYPE_PPC4xx_HOST_BRIDGE_FN0 "ppc4xx-pci-host-bridge-fn0"

That's way too long so I'd drop bridge from all of these and maybe name this ppc4xx-pci-host-fn0 or ppc4xx-pci-host-func (there are no other functions of the bridge so this shows this is the PCI side of it). I'd still go for shorted defines and not changing the string types too much. Would that be acceptable?

Regards,
BALATON Zoltan

Quoted 6 lines
Quoted 3 lines
include/hw/ppc/ppc4xx.h +0 -0
  #define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"
  #define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
 
#28 lore raw

Re: [PATCH 12/13] ppc440_pcix: Don't use iomem for regs

In reply to Philippe Mathieu-Daudé
Quoted 10 lines · Philippe Mathieu-Daudé
Quoted 9 lines · BALATON Zoltan

The iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.

---
  hw/ppc/ppc440_pcix.c | 7 ++++---
  1 file changed, 4 insertions(+), 3 deletions(-)
Quoted 12 lines

hw/ppc/ppc440_pcix.c static void ppc440_pcix_realize(DeviceState *dev, Error · line 488

Quoted 10 lines
hw/ppc/ppc440_pcix.c +1 -0
index adfecf1e76..ee2dc44f67 100644
@@ -484,6 +484,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error 
 **errp)
      SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
      PPC440PCIXState *s;
      PCIHostState *h;
+    MemoryRegion *regs = g_new(MemoryRegion, 1);

Why not hold it within PPC440PCIXState?

Because it's never needed after this function.

Regards,
BALATON Zoltan

Quoted 24 lines
Quoted 21 lines
hw/ppc/ppc440_pcix.c +2 -3
      h = PCI_HOST_BRIDGE(dev);
      s = PPC440_PCIX_HOST(dev);
@@ -507,11 +508,11 @@ static void ppc440_pcix_realize(DeviceState *dev, 
 Error **errp)
                            h, "pci-conf-idx", 4);
      memory_region_init_io(&h->data_mem, OBJECT(s), &pci_host_data_le_ops,
                            h, "pci-conf-data", 4);
-    memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
-                          "pci.reg", PPC440_REG_SIZE);
+    memory_region_init_io(regs, OBJECT(s), &pci_reg_ops, s, "pci-reg",
+                          PPC440_REG_SIZE);
      memory_region_add_subregion(&s->container, PCIC0_CFGADDR, 
 &h->conf_mem);
      memory_region_add_subregion(&s->container, PCIC0_CFGDATA, 
 &h->data_mem);
-    memory_region_add_subregion(&s->container, PPC440_REG_BASE, 

&s->iomem);

+    memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
      sysbus_init_mmio(sbd, &s->container);

}

#13 lore raw

Re: [PATCH 05/13] ppc440: Stop using system io region for PCIe buses

In reply to Philippe Mathieu-Daudé
Quoted 5 lines · Philippe Mathieu-Daudé
Quoted 2 lines · BALATON Zoltan

Add separate memory regions for the mem and io spaces of the PCIe bus to avoid different buses using the same system io region.

"Reduce the I/O space to 64K."

Unlike the other similar patch this does not reduce the IO space size because get_system_io() was that size already. I've changed the size below to use KiB.

Regards,
BALATON Zoltan

Quoted 49 lines
Quoted 18 lines
---
  hw/ppc/ppc440_uc.c | 9 ++++++---
  1 file changed, 6 insertions(+), 3 deletions(-)
hw/ppc/ppc440_uc.c +0 -0
index 38ee27f437..0c5d999878 100644
@@ -776,6 +776,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, 
 PPC460EX_PCIE_HOST)
  struct PPC460EXPCIEState {
      PCIExpressHost host;
  +    MemoryRegion busmem;
      MemoryRegion iomem;
      qemu_irq irq[4];
      int32_t dcrn_base;

hw/ppc/ppc440_uc.c static void ppc460ex_pcie_realize(DeviceState *dev, · line 1064

Quoted 9 lines
hw/ppc/ppc440_uc.c +3 -1
@@ -1056,15 +1057,17 @@ static void ppc460ex_pcie_realize(DeviceState *dev, 
 Error **errp)
          error_setg(errp, "invalid PCIe DCRN base");
          return;
      }
+    snprintf(buf, sizeof(buf), "pcie%d-mem", id);
+    memory_region_init(&s->busmem, OBJECT(s), buf, UINT64_MAX);
      snprintf(buf, sizeof(buf), "pcie%d-io", id);
-    memory_region_init(&s->iomem, OBJECT(s), buf, UINT64_MAX);
+    memory_region_init(&s->iomem, OBJECT(s), buf, 0x10000);

64 * KiB

hw/ppc/ppc440_uc.c static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp) · line 1072

Quoted 12 lines
hw/ppc/ppc440_uc.c +2 -2
      for (i = 0; i < 4; i++) {
          sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq[i]);
      }
      snprintf(buf, sizeof(buf), "pcie.%d", id);
      pci->bus = pci_register_root_bus(DEVICE(s), buf, ppc460ex_set_irq,
-                                pci_swizzle_map_irq_fn, s, &s->iomem,
-                                get_system_io(), 0, 4, TYPE_PCIE_BUS);
+                                pci_swizzle_map_irq_fn, s, &s->busmem,
+                                &s->iomem, 0, 4, TYPE_PCIE_BUS);
      ppc460ex_pcie_register_dcrs(s);
  }

With the changes addressed:

#8 lore raw

Re: [PATCH 03/13] ppc440: Add a macro to shorten PCIe controller DCR registration

In reply to BALATON Zoltan
Quoted 11 lines · BALATON Zoltan
Quoted 10 lines · Philippe Mathieu-Daudé
Quoted 7 lines · BALATON Zoltan

It is more readable to wrap the complex call to ppc_dcr_register in a macro when needed repeatedly.

---
  hw/ppc/ppc440_uc.c | 76 +++++++++++++++++-----------------------------

  1 file changed, 28 insertions(+), 48 deletions(-)
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

+#define PPC440_PCIE_DCR(s, dcrn) \
+    ppc_dcr_register(&(s)->cpu->env, (s)->dcrn_base + (dcrn), s, \

'(s), \'

The parenthesis here would be superfluous as it stands alone in a function parameter between commas so no matter what you substitue here should not have an unwanted side effect (unless it has a comma but that's an error anyway) so maybe this is not needed.

Well I noticed because you used it for the 2 other cases, so I'm just trying to be consistent here. Besides, not using parenthesis for macro arguments is a bad practice. Problems happen when others copy code.

Quoted 11 lines
Quoted 6 lines

hw/ppc/ppc440_uc.c static void ppc460ex_set_irq(void *opaque, int irq_num, int level) · line 1009

Quoted 4 lines

+                     &dcr_read_pcie, &dcr_write_pcie)

hw/ppc/ppc440_uc.c +2 -0
+
+

Thanks for the quick review, I'll post a v2 in a few days to wait a bit if anobody else has any other request.

Regards,
BALATON Zoltan

#29 lore raw

Re: [PATCH 12/13] ppc440_pcix: Don't use iomem for regs

In reply to BALATON Zoltan
Quoted 24 lines · BALATON Zoltan
Quoted 10 lines · Philippe Mathieu-Daudé
Quoted 9 lines · BALATON Zoltan

The iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.

---
  hw/ppc/ppc440_pcix.c | 7 ++++---

  1 file changed, 4 insertions(+), 3 deletions(-)
Quoted 12 lines

hw/ppc/ppc440_pcix.c static void ppc440_pcix_realize(DeviceState *dev, · line 488

Quoted 10 lines
hw/ppc/ppc440_pcix.c +1 -0
index adfecf1e76..ee2dc44f67 100644
@@ -484,6 +484,7 @@ static void ppc440_pcix_realize(DeviceState *dev, 
 Error **errp)
       SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
       PPC440PCIXState *s;
       PCIHostState *h;
+    MemoryRegion *regs = g_new(MemoryRegion, 1);

Why not hold it within PPC440PCIXState?

Quoted 1 line

Because it's never needed after this function.

But we can't free() it because it has to stay valid as long as PPC440PCIXState is in use. So it seems to belong there.

Quoted 26 lines

Regards,
BALATON Zoltan

Quoted 22 lines
Quoted 19 lines
hw/ppc/ppc440_pcix.c +3 -3
       h = PCI_HOST_BRIDGE(dev);
       s = PPC440_PCIX_HOST(dev);
@@ -507,11 +508,11 @@ static void ppc440_pcix_realize(DeviceState 
 *dev, Error **errp)
                             h, "pci-conf-idx", 4);
       memory_region_init_io(&h->data_mem, OBJECT(s), &pci_host_data_le_ops,
                             h, "pci-conf-data", 4);
-    memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
-                          "pci.reg", PPC440_REG_SIZE);
+    memory_region_init_io(regs, OBJECT(s), &pci_reg_ops, s, "pci-reg",
+                          PPC440_REG_SIZE);
       memory_region_add_subregion(&s->container, PCIC0_CFGADDR, &h->conf_mem);
       memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
-    memory_region_add_subregion(&s->container, PPC440_REG_BASE, 
 &s->iomem);
+    memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
       sysbus_init_mmio(sbd, &s->container);

  }

#30 lore raw

Re: [PATCH 12/13] ppc440_pcix: Don't use iomem for regs

Quoted 25 lines · Philippe Mathieu-Daudé
Quoted 24 lines · BALATON Zoltan
Quoted 22 lines · Philippe Mathieu-Daudé
Quoted 14 lines · BALATON Zoltan

The iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.

---
  hw/ppc/ppc440_pcix.c | 7 ++++---

  1 file changed, 4 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +0 -0
index adfecf1e76..ee2dc44f67 100644

hw/ppc/ppc440_pcix.c static void ppc440_pcix_realize(DeviceState *dev, · line 488

Quoted 5 lines
hw/ppc/ppc440_pcix.c +1 -0
@@ -484,6 +484,7 @@ static void ppc440_pcix_realize(DeviceState *dev, 
 Error **errp)
       SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
       PPC440PCIXState *s;
       PCIHostState *h;
+    MemoryRegion *regs = g_new(MemoryRegion, 1);

Why not hold it within PPC440PCIXState?

Quoted 4 lines
Quoted 1 line

Because it's never needed after this function.

But we can't free() it because it has to stay valid as long as PPC440PCIXState is in use. So it seems to belong there.

OK, moved it to PPC440PCIXState.

Regards,
BALATON Zoltan

Quoted 25 lines
Quoted 22 lines
Quoted 22 lines
Quoted 19 lines
hw/ppc/ppc440_pcix.c +3 -3
       h = PCI_HOST_BRIDGE(dev);
       s = PPC440_PCIX_HOST(dev);
@@ -507,11 +508,11 @@ static void ppc440_pcix_realize(DeviceState *dev, 
 Error **errp)
                             h, "pci-conf-idx", 4);
       memory_region_init_io(&h->data_mem, OBJECT(s), &pci_host_data_le_ops,
                             h, "pci-conf-data", 4);
-    memory_region_init_io(&s->iomem, OBJECT(s), &pci_reg_ops, s,
-                          "pci.reg", PPC440_REG_SIZE);
+    memory_region_init_io(regs, OBJECT(s), &pci_reg_ops, s, "pci-reg",
+                          PPC440_REG_SIZE);
       memory_region_add_subregion(&s->container, PCIC0_CFGADDR, &h->conf_mem);
       memory_region_add_subregion(&s->container, PCIC0_CFGDATA, &h->data_mem);
-    memory_region_add_subregion(&s->container, PPC440_REG_BASE, 
 &s->iomem);
+    memory_region_add_subregion(&s->container, PPC440_REG_BASE, regs);
       sysbus_init_mmio(sbd, &s->container);

  }