PPC440 devices misc clean up
v2 cover PPC440 devices misc clean up
These are some small misc clean ups to PPC440 related device models which is all I have ready for now.
v2:
- Added R-b tags from Philippe
- Addressed review comments
- Added new patch to rename parent field of PPC460EXPCIEState to parent_obj
Patches needing review: 6 7 10-13
BALATON Zoltan (14):
ppc440: Change ppc460ex_pcie_init() parameter type
ppc440: Add cpu link property to PCIe controller model
ppc440: Add a macro to shorten PCIe controller DCR registration
ppc440: Rename parent field of PPC460EXPCIEState to match code style
ppc440: Rename local variable in dcr_read_pcie()
ppc440: Stop using system io region for PCIe buses ppc/sam460ex: Remove address_space_mem local variable
ppc440: Add busnum property to PCIe controller model
ppc440: Remove ppc460ex_pcie_init legacy init function
ppc4xx_pci: Rename QOM type name define
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc440_pcix: Rename QOM type define abd move it to common header
ppc440_pcix: Don't use iomem for regs
ppc440_pcix: Stop using system io region for PCI bus
hw/ppc/ppc440.h | 1 - hw/ppc/ppc440_bamboo.c | 3 +- hw/ppc/ppc440_pcix.c | 28 +++--- hw/ppc/ppc440_uc.c | 192 +++++++++++++++++----------------------- hw/ppc/ppc4xx_pci.c | 10 +-- hw/ppc/sam460ex.c | 33 ++++--- include/hw/ppc/ppc4xx.h | 5 +- 7 files changed, 129 insertions(+), 143 deletions(-)
Signature · 1 line
2.30.9
PATCH v2 1/14 ppc440: Change ppc460ex_pcie_init() parameter type
Change parameter of ppc460ex_pcie_init() from env to cpu to allow further refactoring.
--- hw/ppc/ppc440.h | 2 +- hw/ppc/ppc440_uc.c | 7 ++++--- hw/ppc/sam460ex.c | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-)
hw/ppc/ppc440.h +1 -1
@@ -18,6 +18,6 @@ void ppc4xx_cpr_init(CPUPPCState *env);void ppc4xx_sdr_init (CPUPPCState *env);void ppc4xx_ahb_init (CPUPPCState *env);void ppc4xx_dma_init (CPUPPCState *env,int dcr_base); -void ppc460ex_pcie_init (CPUPPCState *env); +void ppc460ex_pcie_init (PowerPCCPU *cpu);#endif /* PPC440_H */
hw/ppc/ppc440_uc.c +4 -3
@@ -17,6 +17,7 @@#include "hw/qdev-properties.h" #include "hw/pci/pci.h" #include "sysemu/reset.h" +#include "cpu.h" #include "ppc440.h" /*****************************************************************************/
@@ -1108,17 +1109,17 @@ static void ppc460ex_pcie_register_dcrs(PPC460EXPCIEState *s, CPUPPCState *env) &dcr_read_pcie, &dcr_write_pcie); } -void ppc460ex_pcie_init (CPUPPCState *env) +void ppc460ex_pcie_init (PowerPCCPU *cpu) {DeviceState *dev; dev =qdev_new (TYPE_PPC460EX_PCIE_HOST );qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE0_BASE );sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); -ppc460ex_pcie_register_dcrs (PPC460EX_PCIE_HOST (dev), env); +ppc460ex_pcie_register_dcrs (PPC460EX_PCIE_HOST (dev), &cpu->env); dev =qdev_new (TYPE_PPC460EX_PCIE_HOST );qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE1_BASE );sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); -ppc460ex_pcie_register_dcrs (PPC460EX_PCIE_HOST (dev), env); +ppc460ex_pcie_register_dcrs (PPC460EX_PCIE_HOST (dev), &cpu->env); }
hw/ppc/sam460ex.c +1 -1
@@ -422,7 +422,7 @@ static void sam460ex_init(MachineState *machine)usb_create_simple (usb_bus_find (-1 ),"usb-mouse" );/* PCI bus */ -ppc460ex_pcie_init (env); +ppc460ex_pcie_init (cpu);/* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */ dev =sysbus_create_simple ("ppc440-pcix-host" ,0xc0ec00000 ,qdev_get_gpio_in (uic[1 ],0 ));
Signature · 1 line
2.30.9
PATCH v2 6/14 ppc440: Stop using system io region for PCIe buses
In reply to BALATON ZoltanAdd separate memory regions for the mem and io spaces of the PCIe bus to avoid different buses using the same system io region.
--- hw/ppc/ppc440_uc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
hw/ppc/ppc440_uc.c +6 -3
@@ -776,6 +776,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, PPC460EX_PCIE_HOST)struct PPC460EXPCIEState {PCIExpressHost parent_obj; +MemoryRegion busmem;MemoryRegion iomem;qemu_irq irq[4 ];int32_t dcrn_base;
@@ -1056,15 +1057,17 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)error_setg (errp,"invalid PCIe DCRN base" );return ; } +snprintf (buf,sizeof (buf),"pcie%d-mem" , id); +memory_region_init (&s->busmem,OBJECT (s), buf,UINT64_MAX );snprintf (buf,sizeof (buf),"pcie%d-io" , id); -memory_region_init (&s->iomem,OBJECT (s), buf,UINT64_MAX ); +memory_region_init (&s->iomem,OBJECT (s), buf,64 * KiB);for (i =0 ; i <4 ; i++) {sysbus_init_irq (SYS_BUS_DEVICE (dev), &s->irq[i]); }snprintf (buf,sizeof (buf),"pcie.%d" , id); pci->bus =pci_register_root_bus (DEVICE (s), buf, ppc460ex_set_irq, - pci_swizzle_map_irq_fn, s, &s->iomem, -get_system_io (),0 ,4 ,TYPE_PCIE_BUS ); + pci_swizzle_map_irq_fn, s, &s->busmem, + &s->iomem,0 ,4 ,TYPE_PCIE_BUS );ppc460ex_pcie_register_dcrs (s); }
Signature · 1 line
2.30.9
PATCH v2 11/14 ppc4xx_pci: Add define for ppc4xx-host-bridge type name
In reply to BALATON ZoltanAdd a QOM type name define for ppc4xx-host-bridge in the common header and replace direct use of the string name with the constant.
--- hw/ppc/ppc440_pcix.c | 3 ++- hw/ppc/ppc4xx_pci.c | 4 ++-- include/hw/ppc/ppc4xx.h | 1 + 3 files changed, 5 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +2 -1
@@ -495,7 +495,8 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp) ppc440_pcix_map_irq, &s->irq, &s->busmem, get_system_io(), PCI_DEVFN(0, 0), 1, TYPE_PCI_BUS); - s->dev =pci_create_simple (h->bus,PCI_DEVFN (0 ,0 ),"ppc4xx-host-bridge" ); + s->dev =pci_create_simple (h->bus,PCI_DEVFN (0 ,0 ), + TYPE_PPC4xx_HOST_BRIDGE);memory_region_init (&s->bm,OBJECT (s),"bm-ppc440-pcix" ,UINT64_MAX );memory_region_add_subregion (&s->bm,0x0 , &s->busmem);
hw/ppc/ppc4xx_pci.c +2 -2
@@ -333,7 +333,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, Error **errp) TYPE_PCI_BUS); h->bus = b; -pci_create_simple (b,0 ,"ppc4xx-host-bridge" ); +pci_create_simple (b,0 , TYPE_PPC4xx_HOST_BRIDGE);/* XXX split into 2 memory regions, one for config space, one for regs */ memory_region_init (&s->container,OBJECT (s),"pci-container" ,PCI_ALL_SIZE );
@@ -367,7 +367,7 @@ static void ppc4xx_host_bridge_class_init(ObjectClass *klass, void *data) }static const TypeInfo ppc4xx_host_bridge_info = { - .name ="ppc4xx-host-bridge" , + .name = TYPE_PPC4xx_HOST_BRIDGE, .parent =TYPE_PCI_DEVICE , .instance_size =sizeof (PCIDevice), .class_init = ppc4xx_host_bridge_class_init,
include/hw/ppc/ppc4xx.h +1 -0
@@ -29,6 +29,7 @@#include "exec/memory.h" #include "hw/sysbus.h" +#define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"#define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"
Signature · 1 line
2.30.9
PATCH v2 10/14 ppc4xx_pci: Rename QOM type name define
In reply to BALATON ZoltanRename the TYPE_PPC4xx_PCI_HOST_BRIDGE define and its string value to match each other and other similar types and to avoid confusion with "ppc4xx-host-bridge" type defined in same file.
--- hw/ppc/ppc440_bamboo.c | 3 +-- hw/ppc/ppc4xx_pci.c | 6 +++--- include/hw/ppc/ppc4xx.h | 2 +- 3 files changed, 5 insertions(+), 6 deletions(-)
hw/ppc/ppc440_bamboo.c +1 -2
@@ -205,8 +205,7 @@ static void bamboo_init(MachineState *machine)ppc4xx_sdram_ddr_enable (PPC4xx_SDRAM_DDR (dev));/* PCI */ - dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE, - PPC440EP_PCI_CONFIG, + dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST, PPC440EP_PCI_CONFIG, qdev_get_gpio_in(uicdev, pci_irq_nrs[0]), qdev_get_gpio_in(uicdev, pci_irq_nrs[1]), qdev_get_gpio_in(uicdev, pci_irq_nrs[2]),
hw/ppc/ppc4xx_pci.c +3 -3
@@ -46,7 +46,7 @@ struct PCITargetMap {uint32_t la; }; -OBJECT_DECLARE_SIMPLE_TYPE(PPC4xxPCIState, PPC4xx_PCI_HOST_BRIDGE) +OBJECT_DECLARE_SIMPLE_TYPE(PPC4xxPCIState, PPC4xx_PCI_HOST)#define PPC4xx_PCI_NR_PMMS 3#define PPC4xx_PCI_NR_PTMS 2
@@ -321,7 +321,7 @@ static void ppc4xx_pcihost_realize(DeviceState *dev, Error **errp)int i; h =PCI_HOST_BRIDGE (dev); - s =PPC4xx_PCI_HOST_BRIDGE (dev); + s =PPC4xx_PCI_HOST (dev);for (i =0 ; i <ARRAY_SIZE (s->irq); i++) {sysbus_init_irq (sbd, &s->irq[i]);
@@ -386,7 +386,7 @@ static void ppc4xx_pcihost_class_init(ObjectClass *klass, void *data) }static const TypeInfo ppc4xx_pcihost_info = { - .name = TYPE_PPC4xx_PCI_HOST_BRIDGE, + .name = TYPE_PPC4xx_PCI_HOST, .parent =TYPE_PCI_HOST_BRIDGE , .instance_size =sizeof (PPC4xxPCIState), .class_init = ppc4xx_pcihost_class_init,
include/hw/ppc/ppc4xx.h +1 -1
@@ -29,7 +29,7 @@#include "exec/memory.h" #include "hw/sysbus.h" -#define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost" +#define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host"#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"/*
Signature · 1 line
2.30.9
PATCH v2 14/14 ppc440_pcix: Stop using system io region for PCI bus
In reply to BALATON ZoltanReduce the iomem region to 64K and use it for the PCI io space and map it directly from the board without an intermediate alias that is not really needed.
--- hw/ppc/ppc440_pcix.c | 9 ++++++--- hw/ppc/sam460ex.c | 6 +----- 2 files changed, 7 insertions(+), 8 deletions(-)
hw/ppc/ppc440_pcix.c +6 -3
@@ -23,6 +23,7 @@#include "qemu/error-report.h" #include "qemu/log.h" #include "qemu/module.h" +#include "qemu/units.h" #include "hw/irq.h" #include "hw/ppc/ppc.h" #include "hw/ppc/ppc4xx.h"
@@ -490,10 +491,11 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp) s =PPC440_PCIX_HOST (dev);sysbus_init_irq (sbd, &s->irq); -memory_region_init (&s->busmem,OBJECT (dev),"pci bus memory" ,UINT64_MAX ); +memory_region_init (&s->busmem,OBJECT (dev),"pci-mem" ,UINT64_MAX ); +memory_region_init (&s->iomem,OBJECT (dev),"pci-io" ,64 * KiB); h->bus =pci_register_root_bus (dev,NULL , ppc440_pcix_set_irq, - ppc440_pcix_map_irq, &s->irq, &s->busmem, -get_system_io (),PCI_DEVFN (0 ,0 ),1 ,TYPE_PCI_BUS ); + ppc440_pcix_map_irq, &s->irq, &s->busmem, &s->iomem, +PCI_DEVFN (0 ,0 ),1 ,TYPE_PCI_BUS ); s->dev =pci_create_simple (h->bus,PCI_DEVFN (0 ,0 ), TYPE_PPC4xx_HOST_BRIDGE);
@@ -514,6 +516,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)memory_region_add_subregion (&s->container,PCIC0_CFGDATA , &h->data_mem);memory_region_add_subregion (&s->container,PPC440_REG_BASE , &s->regs);sysbus_init_mmio (sbd, &s->container); +sysbus_init_mmio (sbd, &s->iomem); }static void ppc440_pcix_class_init (ObjectClass *klass,void *data)
hw/ppc/sam460ex.c +1 -5
@@ -269,7 +269,6 @@ static void main_cpu_reset(void *opaque)static void sam460ex_init (MachineState *machine) { -MemoryRegion *isa =g_new (MemoryRegion,1 );MemoryRegion *l2cache_ram =g_new (MemoryRegion,1 );DeviceState *uic[4 ];int i;
@@ -441,12 +440,9 @@ static void sam460ex_init(MachineState *machine)/* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */ dev =sysbus_create_simple (TYPE_PPC440_PCIX_HOST ,0xc0ec00000 ,qdev_get_gpio_in (uic[1 ],0 )); +sysbus_mmio_map (SYS_BUS_DEVICE (dev),1 ,0xc08000000 ); pci_bus =PCI_BUS (qdev_get_child_bus (dev,"pci.0" )); -memory_region_init_alias (isa,NULL ,"isa_mmio" ,get_system_io (), -0 ,0x10000 ); -memory_region_add_subregion (get_system_memory (),0xc08000000 , isa); -/* PCI devices */ pci_create_simple (pci_bus,PCI_DEVFN (6 ,0 ),"sm501" );/* SoC has a single SATA port but we don't emulate that yet
Signature · 1 line
2.30.9
PATCH v2 5/14 ppc440: Rename local variable in dcr_read_pcie()
In reply to BALATON ZoltanRename local variable storing state struct in dcr_read_pcie() for brevity and consistency with other functions.
--- hw/ppc/ppc440_uc.c | 50 +++++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 25 deletions(-)
hw/ppc/ppc440_uc.c +25 -25
@@ -828,78 +828,78 @@ enum {static uint32_t dcr_read_pcie (void *opaque,int dcrn) { -PPC460EXPCIEState *state = opaque; +PPC460EXPCIEState *s = opaque;uint32_t ret =0 ; -switch (dcrn - state->dcrn_base) { +switch (dcrn - s->dcrn_base) {case PEGPL_CFGBAH : - ret = state->cfg_base >>32 ; + ret = s->cfg_base >>32 ;break ;case PEGPL_CFGBAL : - ret = state->cfg_base; + ret = s->cfg_base;break ;case PEGPL_CFGMSK : - ret = state->cfg_mask; + ret = s->cfg_mask;break ;case PEGPL_MSGBAH : - ret = state->msg_base >>32 ; + ret = s->msg_base >>32 ;break ;case PEGPL_MSGBAL : - ret = state->msg_base; + ret = s->msg_base;break ;case PEGPL_MSGMSK : - ret = state->msg_mask; + ret = s->msg_mask;break ;case PEGPL_OMR1BAH : - ret = state->omr1_base >>32 ; + ret = s->omr1_base >>32 ;break ;case PEGPL_OMR1BAL : - ret = state->omr1_base; + ret = s->omr1_base;break ;case PEGPL_OMR1MSKH : - ret = state->omr1_mask >>32 ; + ret = s->omr1_mask >>32 ;break ;case PEGPL_OMR1MSKL : - ret = state->omr1_mask; + ret = s->omr1_mask;break ;case PEGPL_OMR2BAH : - ret = state->omr2_base >>32 ; + ret = s->omr2_base >>32 ;break ;case PEGPL_OMR2BAL : - ret = state->omr2_base; + ret = s->omr2_base;break ;case PEGPL_OMR2MSKH : - ret = state->omr2_mask >>32 ; + ret = s->omr2_mask >>32 ;break ;case PEGPL_OMR2MSKL : - ret = state->omr3_mask; + ret = s->omr3_mask;break ;case PEGPL_OMR3BAH : - ret = state->omr3_base >>32 ; + ret = s->omr3_base >>32 ;break ;case PEGPL_OMR3BAL : - ret = state->omr3_base; + ret = s->omr3_base;break ;case PEGPL_OMR3MSKH : - ret = state->omr3_mask >>32 ; + ret = s->omr3_mask >>32 ;break ;case PEGPL_OMR3MSKL : - ret = state->omr3_mask; + ret = s->omr3_mask;break ;case PEGPL_REGBAH : - ret = state->reg_base >>32 ; + ret = s->reg_base >>32 ;break ;case PEGPL_REGBAL : - ret = state->reg_base; + ret = s->reg_base;break ;case PEGPL_REGMSK : - ret = state->reg_mask; + ret = s->reg_mask;break ;case PEGPL_SPECIAL : - ret = state->special; + ret = s->special;break ;case PEGPL_CFG : - ret = state->cfg; + ret = s->cfg;break ; }
Signature · 1 line
2.30.9
PATCH v2 4/14 ppc440: Rename parent field of PPC460EXPCIEState to match code style
In reply to BALATON ZoltanQOM prefers to call the parent field parent_obj, change PPC460EXPCIEState ro match that convention.
--- hw/ppc/ppc440_uc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/ppc/ppc440_uc.c +1 -1
@@ -774,7 +774,7 @@ void ppc4xx_dma_init(CPUPPCState *env, int dcr_base) OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, PPC460EX_PCIE_HOST)struct PPC460EXPCIEState { -PCIExpressHost host; +PCIExpressHost parent_obj;MemoryRegion iomem;qemu_irq irq[4 ];
Signature · 1 line
2.30.9
PATCH v2 13/14 ppc440_pcix: Don't use iomem for regs
In reply to BALATON ZoltanThe iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.
--- hw/ppc/ppc440_pcix.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
hw/ppc/ppc440_pcix.c +4 -3
@@ -63,6 +63,7 @@ struct PPC440PCIXState {MemoryRegion container;MemoryRegion iomem;MemoryRegion busmem; +MemoryRegion regs; };#define PPC440_REG_BASE 0x80000
@@ -507,11 +508,11 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp) h, "pci-conf-idx", 4);memory_region_init_io (&h->data_mem,OBJECT (s), &pci_host_data_le_ops, h,"pci-conf-data" ,4 ); -memory_region_init_io (&s->iomem,OBJECT (s), &pci_reg_ops, s, -"pci.reg" ,PPC440_REG_SIZE ); +memory_region_init_io (&s->regs,OBJECT (s), &pci_reg_ops, s,"pci-reg" , +PPC440_REG_SIZE );memory_region_add_subregion (&s->container,PCIC0_CFGADDR , &h->conf_mem);memory_region_add_subregion (&s->container,PCIC0_CFGDATA , &h->data_mem); -memory_region_add_subregion (&s->container,PPC440_REG_BASE , &s->iomem); +memory_region_add_subregion (&s->container,PPC440_REG_BASE , &s->regs);sysbus_init_mmio (sbd, &s->container); }
Signature · 1 line
2.30.9
PATCH v2 2/14 ppc440: Add cpu link property to PCIe controller model
In reply to BALATON ZoltanThe PCIe controller model uses PPC DCRs but cannot be modeled with TYPE_PPC4xx_DCR_DEVICE as it derives from TYPE_PCIE_HOST_BRIDGE. Add a cpu link property to it similar to other DCR devices to allow registering DCRs from the device model.
--- hw/ppc/ppc440_uc.c | 114 ++++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 52 deletions(-)
hw/ppc/ppc440_uc.c +62 -52
@@ -779,6 +779,7 @@ struct PPC460EXPCIEState {MemoryRegion iomem;qemu_irq irq[4 ];int32_t dcrn_base; +PowerPCCPU *cpu;uint64_t cfg_base;uint32_t cfg_mask;
@@ -1001,6 +1002,58 @@ static void ppc460ex_set_irq(void *opaque, int irq_num, int level)qemu_set_irq (s->irq[irq_num], level); } +static void ppc460ex_pcie_register_dcrs (PPC460EXPCIEState *s) +{ +CPUPPCState *env = &s->cpu->env; + +ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGBAH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGBAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGMSK , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGBAH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGBAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGMSK , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1BAH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1BAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1MSKH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1MSKL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2BAH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2BAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2MSKH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2MSKL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3BAH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3BAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3MSKH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3MSKL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_REGBAH , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_REGBAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_REGMSK , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_SPECIAL , s, + &dcr_read_pcie, &dcr_write_pcie); +ppc_dcr_register (env, s->dcrn_base +PEGPL_CFG , s, + &dcr_read_pcie, &dcr_write_pcie); +} +static void ppc460ex_pcie_realize (DeviceState *dev,Error **errp) {PPC460EXPCIEState *s =PPC460EX_PCIE_HOST (dev);
@@ -1008,6 +1061,10 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp)int i, id;char buf[16 ]; +if (!s->cpu) { +error_setg (errp,"cpu link property must be set" ); +return ; + }switch (s->dcrn_base) {case DCRN_PCIE0_BASE : id =0 ;
@@ -1028,10 +1085,13 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp) pci->bus =pci_register_root_bus (DEVICE (s), buf, ppc460ex_set_irq, pci_swizzle_map_irq_fn, s, &s->iomem,get_system_io (),0 ,4 ,TYPE_PCIE_BUS ); +ppc460ex_pcie_register_dcrs (s); }static Property ppc460ex_pcie_props[] = {DEFINE_PROP_INT32 ("dcrn-base" , PPC460EXPCIEState, dcrn_base,-1 ), +DEFINE_PROP_LINK ("cpu" , PPC460EXPCIEState, cpu,TYPE_POWERPC_CPU , + PowerPCCPU *),DEFINE_PROP_END_OF_LIST (), };
@@ -1059,67 +1119,17 @@ static void ppc460ex_pcie_register(void)type_init (ppc460ex_pcie_register) -static void ppc460ex_pcie_register_dcrs(PPC460EXPCIEState *s, CPUPPCState *env) -{ -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGBAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGBAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGMSK , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGBAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGBAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGMSK , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1BAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1BAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1MSKH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1MSKL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2BAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2BAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2MSKH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2MSKL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3BAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3BAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3MSKH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3MSKL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_REGBAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_REGBAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_REGMSK , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_SPECIAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFG , s, - &dcr_read_pcie, &dcr_write_pcie); -} - void ppc460ex_pcie_init(PowerPCCPU *cpu) {DeviceState *dev; dev =qdev_new (TYPE_PPC460EX_PCIE_HOST );qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE0_BASE ); +object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort);sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); -ppc460ex_pcie_register_dcrs (PPC460EX_PCIE_HOST (dev), &cpu->env); dev =qdev_new (TYPE_PPC460EX_PCIE_HOST );qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE1_BASE ); +object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort);sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); -ppc460ex_pcie_register_dcrs (PPC460EX_PCIE_HOST (dev), &cpu->env); }
Signature · 1 line
2.30.9
PATCH v2 3/14 ppc440: Add a macro to shorten PCIe controller DCR registration
In reply to BALATON ZoltanIt is shorter and more readable to wrap the complex call to ppc_dcr_register() in a macro than to repeat it several times.
--- hw/ppc/ppc440_uc.c | 76 +++++++++++++++++----------------------------- 1 file changed, 28 insertions(+), 48 deletions(-)
hw/ppc/ppc440_uc.c +28 -48
@@ -1002,56 +1002,36 @@ static void ppc460ex_set_irq(void *opaque, int irq_num, int level)qemu_set_irq (s->irq[irq_num], level); } +#define PPC440_PCIE_DCR (s, dcrn) \ + ppc_dcr_register(&(s)->cpu->env, (s)->dcrn_base + (dcrn), (s), \ + &dcr_read_pcie, &dcr_write_pcie) + +static void ppc460ex_pcie_register_dcrs (PPC460EXPCIEState *s) { -CPUPPCState *env = &s->cpu->env; - -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGBAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGBAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFGMSK , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGBAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGBAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_MSGMSK , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1BAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1BAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1MSKH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR1MSKL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2BAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2BAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2MSKH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR2MSKL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3BAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3BAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3MSKH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_OMR3MSKL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_REGBAH , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_REGBAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_REGMSK , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_SPECIAL , s, - &dcr_read_pcie, &dcr_write_pcie); -ppc_dcr_register (env, s->dcrn_base +PEGPL_CFG , s, - &dcr_read_pcie, &dcr_write_pcie); +PPC440_PCIE_DCR (s,PEGPL_CFGBAH ); +PPC440_PCIE_DCR (s,PEGPL_CFGBAL ); +PPC440_PCIE_DCR (s,PEGPL_CFGMSK ); +PPC440_PCIE_DCR (s,PEGPL_MSGBAH ); +PPC440_PCIE_DCR (s,PEGPL_MSGBAL ); +PPC440_PCIE_DCR (s,PEGPL_MSGMSK ); +PPC440_PCIE_DCR (s,PEGPL_OMR1BAH ); +PPC440_PCIE_DCR (s,PEGPL_OMR1BAL ); +PPC440_PCIE_DCR (s,PEGPL_OMR1MSKH ); +PPC440_PCIE_DCR (s,PEGPL_OMR1MSKL ); +PPC440_PCIE_DCR (s,PEGPL_OMR2BAH ); +PPC440_PCIE_DCR (s,PEGPL_OMR2BAL ); +PPC440_PCIE_DCR (s,PEGPL_OMR2MSKH ); +PPC440_PCIE_DCR (s,PEGPL_OMR2MSKL ); +PPC440_PCIE_DCR (s,PEGPL_OMR3BAH ); +PPC440_PCIE_DCR (s,PEGPL_OMR3BAL ); +PPC440_PCIE_DCR (s,PEGPL_OMR3MSKH ); +PPC440_PCIE_DCR (s,PEGPL_OMR3MSKL ); +PPC440_PCIE_DCR (s,PEGPL_REGBAH ); +PPC440_PCIE_DCR (s,PEGPL_REGBAL ); +PPC440_PCIE_DCR (s,PEGPL_REGMSK ); +PPC440_PCIE_DCR (s,PEGPL_SPECIAL ); +PPC440_PCIE_DCR (s,PEGPL_CFG ); }static void ppc460ex_pcie_realize (DeviceState *dev,Error **errp)
Signature · 1 line
2.30.9
PATCH v2 8/14 ppc440: Add busnum property to PCIe controller model
In reply to BALATON ZoltanInstead of guessing controller number from dcrn_base add a property so the device does not need knowledge about where it is used.
--- hw/ppc/ppc440_uc.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-)
hw/ppc/ppc440_uc.c +11 -14
@@ -779,6 +779,7 @@ struct PPC460EXPCIEState {MemoryRegion busmem;MemoryRegion iomem;qemu_irq irq[4 ]; +int32_t num;int32_t dcrn_base;PowerPCCPU *cpu;
@@ -1039,32 +1040,25 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp) {PPC460EXPCIEState *s =PPC460EX_PCIE_HOST (dev);PCIHostState *pci =PCI_HOST_BRIDGE (dev); -int i, id; -char buf[16 ]; +int i; +char buf[20 ];if (!s->cpu) {error_setg (errp,"cpu link property must be set" );return ; } -switch (s->dcrn_base) { -case DCRN_PCIE0_BASE : - id =0 ; -break ; -case DCRN_PCIE1_BASE : - id =1 ; -break ; -default : -error_setg (errp,"invalid PCIe DCRN base" ); +if (s->num <0 || s->dcrn_base <0 ) { +error_setg (errp,"busnum and dcrn-base properties must be set" );return ; } -snprintf (buf,sizeof (buf),"pcie%d-mem" , id); +snprintf (buf,sizeof (buf),"pcie%d-mem" , s->num);memory_region_init (&s->busmem,OBJECT (s), buf,UINT64_MAX ); -snprintf (buf,sizeof (buf),"pcie%d-io" , id); +snprintf (buf,sizeof (buf),"pcie%d-io" , s->num);memory_region_init (&s->iomem,OBJECT (s), buf,64 * KiB);for (i =0 ; i <4 ; i++) {sysbus_init_irq (SYS_BUS_DEVICE (dev), &s->irq[i]); } -snprintf (buf,sizeof (buf),"pcie.%d" , id); +snprintf (buf,sizeof (buf),"pcie.%d" , s->num); pci->bus =pci_register_root_bus (DEVICE (s), buf, ppc460ex_set_irq, pci_swizzle_map_irq_fn, s, &s->busmem, &s->iomem,0 ,4 ,TYPE_PCIE_BUS );
@@ -1072,6 +1066,7 @@ static void ppc460ex_pcie_realize(DeviceState *dev, Error **errp) }static Property ppc460ex_pcie_props[] = { +DEFINE_PROP_INT32 ("busnum" , PPC460EXPCIEState, num,-1 ),DEFINE_PROP_INT32 ("dcrn-base" , PPC460EXPCIEState, dcrn_base,-1 ),DEFINE_PROP_LINK ("cpu" , PPC460EXPCIEState, cpu,TYPE_POWERPC_CPU , PowerPCCPU *),
@@ -1107,11 +1102,13 @@ void ppc460ex_pcie_init(PowerPCCPU *cpu)DeviceState *dev; dev =qdev_new (TYPE_PPC460EX_PCIE_HOST ); +qdev_prop_set_int32 (dev,"busnum" ,0 );qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE0_BASE );object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort);sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); dev =qdev_new (TYPE_PPC460EX_PCIE_HOST ); +qdev_prop_set_int32 (dev,"busnum" ,1 );qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE1_BASE );object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort);sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal);
Signature · 1 line
2.30.9
PATCH v2 12/14 ppc440_pcix: Rename QOM type define abd move it to common header
In reply to BALATON ZoltanRename TYPE_PPC440_PCIX_HOST_BRIDGE to better match its string value, move it to common header and use it also in sam460ex to replace hard coded type name.
--- hw/ppc/ppc440_pcix.c | 9 ++++----- hw/ppc/sam460ex.c | 2 +- include/hw/ppc/ppc4xx.h | 1 + 3 files changed, 6 insertions(+), 6 deletions(-)
hw/ppc/ppc440_pcix.c +4 -5
@@ -44,8 +44,7 @@ struct PLBInMap {MemoryRegion mr; }; -#define TYPE_PPC440_PCIX_HOST_BRIDGE "ppc440-pcix-host" -OBJECT_DECLARE_SIMPLE_TYPE(PPC440PCIXState, PPC440_PCIX_HOST_BRIDGE) +OBJECT_DECLARE_SIMPLE_TYPE(PPC440PCIXState, PPC440_PCIX_HOST)#define PPC440_PCIX_NR_POMS 3#define PPC440_PCIX_NR_PIMS 3
@@ -397,7 +396,7 @@ static const MemoryRegionOps pci_reg_ops = {static void ppc440_pcix_reset (DeviceState *dev) { -struct PPC440PCIXState *s =PPC440_PCIX_HOST_BRIDGE (dev); +struct PPC440PCIXState *s =PPC440_PCIX_HOST (dev);int i;for (i =0 ; i <PPC440_PCIX_NR_POMS ; i++) {
@@ -487,7 +486,7 @@ static void ppc440_pcix_realize(DeviceState *dev, Error **errp)PCIHostState *h; h =PCI_HOST_BRIDGE (dev); - s =PPC440_PCIX_HOST_BRIDGE (dev); + s =PPC440_PCIX_HOST (dev);sysbus_init_irq (sbd, &s->irq);memory_region_init (&s->busmem,OBJECT (dev),"pci bus memory" ,UINT64_MAX );
@@ -525,7 +524,7 @@ static void ppc440_pcix_class_init(ObjectClass *klass, void *data) }static const TypeInfo ppc440_pcix_info = { - .name =TYPE_PPC440_PCIX_HOST_BRIDGE , + .name =TYPE_PPC440_PCIX_HOST , .parent =TYPE_PCI_HOST_BRIDGE , .instance_size =sizeof (PPC440PCIXState), .class_init = ppc440_pcix_class_init,
hw/ppc/sam460ex.c +1 -1
@@ -439,7 +439,7 @@ static void sam460ex_init(MachineState *machine)/* PCI bus */ /* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */ - dev =sysbus_create_simple ("ppc440-pcix-host" ,0xc0ec00000 , + dev =sysbus_create_simple (TYPE_PPC440_PCIX_HOST ,0xc0ec00000 ,qdev_get_gpio_in (uic[1 ],0 )); pci_bus =PCI_BUS (qdev_get_child_bus (dev,"pci.0" ));
include/hw/ppc/ppc4xx.h +1 -0
@@ -31,6 +31,7 @@#define TYPE_PPC4xx_HOST_BRIDGE "ppc4xx-host-bridge"#define TYPE_PPC4xx_PCI_HOST "ppc4xx-pci-host" +#define TYPE_PPC440_PCIX_HOST "ppc440-pcix-host"#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"/*
Signature · 1 line
2.30.9
PATCH v2 9/14 ppc440: Remove ppc460ex_pcie_init legacy init function
In reply to BALATON ZoltanAfter previous changes we can now remove the legacy init function and move the device creation to board code.
--- hw/ppc/ppc440.h | 1 - hw/ppc/ppc440_uc.c | 21 --------------------- hw/ppc/sam460ex.c | 17 ++++++++++++++++- include/hw/ppc/ppc4xx.h | 1 + 4 files changed, 17 insertions(+), 23 deletions(-)
hw/ppc/ppc440.h +0 -1
@@ -18,6 +18,5 @@ void ppc4xx_cpr_init(CPUPPCState *env);void ppc4xx_sdr_init (CPUPPCState *env);void ppc4xx_ahb_init (CPUPPCState *env);void ppc4xx_dma_init (CPUPPCState *env,int dcr_base); -void ppc460ex_pcie_init (PowerPCCPU *cpu);#endif /* PPC440_H */
hw/ppc/ppc440_uc.c +0 -21
@@ -770,7 +770,6 @@ void ppc4xx_dma_init(CPUPPCState *env, int dcr_base)*/ #include "hw/pci/pcie_host.h" -#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host" OBJECT_DECLARE_SIMPLE_TYPE(PPC460EXPCIEState, PPC460EX_PCIE_HOST)struct PPC460EXPCIEState {
@@ -799,9 +798,6 @@ struct PPC460EXPCIEState {uint32_t cfg; }; -#define DCRN_PCIE0_BASE 0x100 -#define DCRN_PCIE1_BASE 0x120 -enum {PEGPL_CFGBAH =0x0 ,PEGPL_CFGBAL ,
@@ -1096,20 +1092,3 @@ static void ppc460ex_pcie_register(void) }type_init (ppc460ex_pcie_register) - -void ppc460ex_pcie_init(PowerPCCPU *cpu) -{ -DeviceState *dev; - - dev =qdev_new (TYPE_PPC460EX_PCIE_HOST ); -qdev_prop_set_int32 (dev,"busnum" ,0 ); -qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE0_BASE ); -object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort); -sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); - - dev =qdev_new (TYPE_PPC460EX_PCIE_HOST ); -qdev_prop_set_int32 (dev,"busnum" ,1 ); -qdev_prop_set_int32 (dev,"dcrn-base" ,DCRN_PCIE1_BASE ); -object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort); -sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); -}
hw/ppc/sam460ex.c +16 -1
@@ -45,6 +45,9 @@/* dd bs=1 skip=$(($(stat -c '%s' updater/updater-460) - 0x80000)) \ if=updater/updater-460 of=u-boot-sam460-20100605.bin */ +#define PCIE0_DCRN_BASE 0x100 +#define PCIE1_DCRN_BASE 0x120 +/* from Sam460 U-Boot include/configs/Sam460ex.h */ #define FLASH_BASE 0xfff00000#define FLASH_BASE_H 0x4
@@ -421,8 +424,20 @@ static void sam460ex_init(MachineState *machine)usb_create_simple (usb_bus_find (-1 ),"usb-kbd" );usb_create_simple (usb_bus_find (-1 ),"usb-mouse" ); +/* PCIe buses */ + dev =qdev_new (TYPE_PPC460EX_PCIE_HOST ); +qdev_prop_set_int32 (dev,"busnum" ,0 ); +qdev_prop_set_int32 (dev,"dcrn-base" ,PCIE0_DCRN_BASE ); +object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort); +sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); + + dev =qdev_new (TYPE_PPC460EX_PCIE_HOST ); +qdev_prop_set_int32 (dev,"busnum" ,1 ); +qdev_prop_set_int32 (dev,"dcrn-base" ,PCIE1_DCRN_BASE ); +object_property_set_link (OBJECT (dev),"cpu" ,OBJECT (cpu), &error_abort); +sysbus_realize_and_unref (SYS_BUS_DEVICE (dev), &error_fatal); +/* PCI bus */ -ppc460ex_pcie_init (cpu);/* All PCI irqs are connected to the same UIC pin (cf. UBoot source) */ dev =sysbus_create_simple ("ppc440-pcix-host" ,0xc0ec00000 ,qdev_get_gpio_in (uic[1 ],0 ));
include/hw/ppc/ppc4xx.h +1 -0
@@ -30,6 +30,7 @@#include "hw/sysbus.h" #define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost" +#define TYPE_PPC460EX_PCIE_HOST "ppc460ex-pcie-host"/* * Generic DCR device
Signature · 1 line
2.30.9
PATCH v2 7/14 ppc/sam460ex: Remove address_space_mem local variable
In reply to BALATON ZoltanSome places already use get_system_memory() directly so replace the remaining uses and drop the local variable.
--- hw/ppc/sam460ex.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
hw/ppc/sam460ex.c +4 -4
@@ -266,7 +266,6 @@ static void main_cpu_reset(void *opaque)static void sam460ex_init (MachineState *machine) { -MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *isa =g_new (MemoryRegion,1 );MemoryRegion *l2cache_ram =g_new (MemoryRegion,1 );DeviceState *uic[4 ];
@@ -406,7 +405,8 @@ static void sam460ex_init(MachineState *machine)/* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */ memory_region_init_ram (l2cache_ram,NULL ,"ppc440.l2cache_ram" ,256 * KiB, &error_abort); -memory_region_add_subregion (address_space_mem,0x400000000LL , l2cache_ram); +memory_region_add_subregion (get_system_memory (),0x400000000LL , + l2cache_ram);/* USB */ sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400,
@@ -444,13 +444,13 @@ static void sam460ex_init(MachineState *machine)/* SoC has 4 UARTs * but board has only one wired and two are present in fdt */ if (serial_hd (0 ) !=NULL ) { -serial_mm_init (address_space_mem,0x4ef600300 ,0 , +serial_mm_init (get_system_memory (),0x4ef600300 ,0 ,qdev_get_gpio_in (uic[1 ],1 ),PPC_SERIAL_MM_BAUDBASE ,serial_hd (0 ),DEVICE_BIG_ENDIAN ); }if (serial_hd (1 ) !=NULL ) { -serial_mm_init (address_space_mem,0x4ef600400 ,0 , +serial_mm_init (get_system_memory (),0x4ef600400 ,0 ,qdev_get_gpio_in (uic[0 ],1 ),PPC_SERIAL_MM_BAUDBASE ,serial_hd (1 ),DEVICE_BIG_ENDIAN );
Signature · 1 line
2.30.9
Quoted 2 lines · BALATON Zoltan
These are some small misc clean ups to PPC440 related device models which is all I have ready for now.
Sorry, typo in email addresses in cc. Should I send it again or you can pick up from the list?
Regards,
BALATON Zoltan
Quoted 33 lines
v2:
- Added R-b tags from Philippe
- Addressed review comments
- Added new patch to rename parent field of PPC460EXPCIEState toparent_objPatches needing review: 6 7 10-13
BALATON Zoltan (14):
ppc440: Changeppc460ex_pcie_init()parameter type
ppc440: Add cpu link property to PCIe controller model
ppc440: Add a macro to shorten PCIe controller DCR registration
ppc440: Rename parent field of PPC460EXPCIEState to match code style
ppc440: Rename local variable indcr_read_pcie()
ppc440: Stop using system io region for PCIe buses ppc/sam460ex: Removeaddress_space_memlocal variable
ppc440: Add busnum property to PCIe controller model
ppc440: Removeppc460ex_pcie_initlegacy init function
ppc4xx_pci: Rename QOM type name define
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc440_pcix: Rename QOM type define abd move it to common header
ppc440_pcix: Don't use iomem for regs
ppc440_pcix: Stop using system io region for PCI bushw/ppc/ppc440.h | 1 - hw/ppc/ppc440_bamboo.c | 3 +- hw/ppc/ppc440_pcix.c | 28 +++--- hw/ppc/ppc440_uc.c | 192 +++++++++++++++++----------------------- hw/ppc/ppc4xx_pci.c | 10 +-- hw/ppc/sam460ex.c | 33 ++++--- include/hw/ppc/ppc4xx.h | 5 +- 7 files changed, 129 insertions(+), 143 deletions(-)
Re: [PATCH v2 13/14] ppc440_pcix: Don't use iomem for regs
In reply to BALATON ZoltanQuoted 8 lines · BALATON Zoltan
The iomem memory region is better used for the PCI IO space but currently used for registers. Stop using it for that to allow this to be cleaned up in the next patch.
Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/ppc440_pcix.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
Re: [PATCH v2 06/14] ppc440: Stop using system io region for PCIe buses
In reply to BALATON ZoltanQuoted 7 lines · BALATON Zoltan
Add separate memory regions for the mem and io spaces of the PCIe bus to avoid different buses using the same system io region.
Signed-off-by BALATON Zoltan <[email protected]>--- hw/ppc/ppc440_uc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
Re: [PATCH v2 07/14] ppc/sam460ex: Remove address_space_mem local variable
In reply to BALATON ZoltanQuoted 5 lines · BALATON Zoltan
Some places already use
get_system_memory()directly so replace the remaining uses and drop the local variable.Signed-off-by BALATON Zoltan <[email protected]>---
Quoted 41 lines
hw/ppc/sam460ex.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)hw/ppc/sam460ex.c +4
-4@@ -266,7 +266,6 @@ static void main_cpu_reset(void *opaque)static void sam460ex_init (MachineState *machine) { -MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *isa =g_new (MemoryRegion,1 );MemoryRegion *l2cache_ram =g_new (MemoryRegion,1 );DeviceState *uic[4 ];@@ -406,7 +405,8 @@ static void sam460ex_init(MachineState *machine)/* FIXME: remove this after fixing l2sram mapping in ppc440_uc.c? */ memory_region_init_ram (l2cache_ram,NULL ,"ppc440.l2cache_ram" ,256 * KiB, &error_abort); -memory_region_add_subregion (address_space_mem,0x400000000LL , l2cache_ram); +memory_region_add_subregion (get_system_memory (),0x400000000LL , + l2cache_ram);/* USB */ sysbus_create_simple(TYPE_PPC4xx_EHCI, 0x4bffd0400,@@ -444,13 +444,13 @@ static void sam460ex_init(MachineState *machine)/* SoC has 4 UARTs * but board has only one wired and two are present in fdt */ if (serial_hd (0 ) !=NULL ) { -serial_mm_init (address_space_mem,0x4ef600300 ,0 , +serial_mm_init (get_system_memory (),0x4ef600300 ,0 ,qdev_get_gpio_in (uic[1 ],1 ),PPC_SERIAL_MM_BAUDBASE ,serial_hd (0 ),DEVICE_BIG_ENDIAN ); }if (serial_hd (1 ) !=NULL ) { -serial_mm_init (address_space_mem,0x4ef600400 ,0 , +serial_mm_init (get_system_memory (),0x4ef600400 ,0 ,qdev_get_gpio_in (uic[0 ],1 ),PPC_SERIAL_MM_BAUDBASE ,serial_hd (1 ),DEVICE_BIG_ENDIAN );
Zoltan,
Patches 1-9 are queued. Don't need to re-send those.
Thanks,
Daniel
Quoted 35 lines · BALATON Zoltan
These are some small misc clean ups to PPC440 related device models which is all I have ready for now.
v2:
- Added R-b tags from Philippe
- Addressed review comments
- Added new patch to rename parent field of PPC460EXPCIEState toparent_objPatches needing review: 6 7 10-13
BALATON Zoltan (14):
ppc440: Changeppc460ex_pcie_init()parameter type
ppc440: Add cpu link property to PCIe controller model
ppc440: Add a macro to shorten PCIe controller DCR registration
ppc440: Rename parent field of PPC460EXPCIEState to match code style
ppc440: Rename local variable indcr_read_pcie()
ppc440: Stop using system io region for PCIe buses ppc/sam460ex: Removeaddress_space_memlocal variable
ppc440: Add busnum property to PCIe controller model
ppc440: Removeppc460ex_pcie_initlegacy init function
ppc4xx_pci: Rename QOM type name define
ppc4xx_pci: Add define for ppc4xx-host-bridge type name
ppc440_pcix: Rename QOM type define abd move it to common header
ppc440_pcix: Don't use iomem for regs
ppc440_pcix: Stop using system io region for PCI bushw/ppc/ppc440.h | 1 - hw/ppc/ppc440_bamboo.c | 3 +- hw/ppc/ppc440_pcix.c | 28 +++--- hw/ppc/ppc440_uc.c | 192 +++++++++++++++++----------------------- hw/ppc/ppc4xx_pci.c | 10 +-- hw/ppc/sam460ex.c | 33 ++++--- include/hw/ppc/ppc4xx.h | 5 +- 7 files changed, 129 insertions(+), 143 deletions(-)
Quoted 3 lines · Daniel Henrique Barboza
Zoltan,
Patches 1-9 are queued. Don't need to re-send those.
Thanks, the last two patches are also reviewed and they don't depend on the ones before so you could queue those too.
The only outstanding patches are those 3 that rename the type defines to match their string values. We could come up with better names but those suggested by Philippe are too long IMO so at least the patches in this series clean up the current mess and we could rename these later. I'd rather not change the string values too much as those are what QOM actually uses to ideintify the types but we're free to change the defines. Currently we have:
#define TYPE_PPC4xx_PCI_HOST_BRIDGE "ppc4xx-pcihost"
and then a "ppc4xx-host-bridge" type without a define which is another type which is quite confusing. I may have partly created this mess back when I first tried to add sam460ex and did not know much about this but at least I'd like to improve it a little and resolve some of it now.
Regards,
BALATON Zoltan
Quoted 6 lines · BALATON Zoltan
Quoted 3 lines · Daniel Henrique Barboza
Zoltan,
Patches 1-9 are queued. Don't need to re-send those.
Thanks, the last two patches are also reviewed and they don't depend on the ones before so you could queue those too.
Just queued patch 13.
Patch 14 doesn't apply in ppc-next even after applying patch 13:
$ git am -s -m \[PATCH\ v2\ 14_14\]\ ppc440_pcix\:\ Stop\ using\ system\ io\ region\ for\ PCI\ bus\ -\ BALATON\ Zoltan\ \<[email protected]\>\ -\ 2023-07-05\ 1712.eml Applying: ppc440_pcix: Stop using system io region for PCI bus error: patch failed: hw/ppc/ppc440_pcix.c:490 error: hw/ppc/ppc440_pcix.c: patch does not apply error: patch failed: hw/ppc/sam460ex.c:441 error: hw/ppc/sam460ex.c: patch does not apply Patch failed at 0001 ppc440_pcix: Stop using system io region for PCI bus hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
I suspect we need some of the previous (10, 11, 12) to apply it cleanly.
Thanks,
Daniel
Quoted 7 lines
The only outstanding patches are those 3 that rename the type defines to match their string values. We could come up with better names but those suggested by Philippe are too long IMO so at least the patches in this series clean up the current mess and we could rename these later. I'd rather not change the string values too much as those are what QOM actually uses to ideintify the types but we're free to change the defines. Currently we have:
#defineTYPE_PPC4xx_PCI_HOST_BRIDGE"ppc4xx-pcihost"
and then a "ppc4xx-host-bridge" type without a define which is another type which is quite confusing. I may have partly created this mess back when I first tried to add sam460ex and did not know much about this but at least I'd like to improve it a little and resolve some of it now.Regards,
BALATON Zoltan
Quoted 24 lines · Daniel Henrique Barboza
Quoted 6 lines · BALATON Zoltan
Quoted 3 lines · Daniel Henrique Barboza
Zoltan,
Patches 1-9 are queued. Don't need to re-send those.
Thanks, the last two patches are also reviewed and they don't depend on the ones before so you could queue those too.
Just queued patch 13.
Patch 14 doesn't apply in ppc-next even after applying patch 13:
$ git am -s -m \[PATCH\ v2\ 14_14\]\ ppc440_pcix\:\ Stop\ using\ system\ io\ region\ for\ PCI\ bus\ -\ BALATON\ Zoltan\ \<[email protected]\>\ -\ 2023-07-05\ 1712.eml Applying: ppc440_pcix: Stop using system io region for PCI bus error: patch failed: hw/ppc/ppc440_pcix.c:490 error: hw/ppc/ppc440_pcix.c: patch does not apply error: patch failed: hw/ppc/sam460ex.c:441 error: hw/ppc/sam460ex.c: patch does not apply Patch failed at 0001 ppc440_pcix: Stop using system io region for PCI bus hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort".
Quoted 1 line
I suspect we need some of the previous (10, 11, 12) to apply it cleanly.
There was only one place in context that differs. All I did was an interactive rebase with moving it to the front and it did not have any conflict. I've resent a v3 series with that so you can take the first patch from that (or the rest of that if we can reach a decision on naming). The first attempt had wrong dates so I've resent the series. Sorry about that.
Regards,
BALATON Zoltan