x86: address MISRA C:2012 Rule 5.3
v2 cover x86: address MISRA C:2012 Rule 5.3
This series addresses shadowing issues to resolve violations of Rule 5.3, whose headline states:
"An identifier declared in an inner scope shall not hide an identifier declared in an outer scope". To do this, suitable renames are made.
The thread of the first submission is here [1]
---
Changes in v2:
- Addressed numerous review comments
- Dropped patch 2/6 [2], as that has already been committed
[1] https://lists.xenproject.org/archives/html/xen-devel/2023-08/msg00538.html
[2] https://lists.xenproject.org/archives/html/xen-devel/2023-08/msg00539.html
Nicola Vetrini (5):
x86: address MISRA C:2012 Rule 5.3
xen/delay: address MISRA C:2012 Rule 5.3.
x86/include: address MISRA C:2012 Rule 5.3.
x86/xstate: address MISRA C:2012 Rule 5.3
x86: refactor macros in 'xen-mca.h'
xen/arch/x86/e820.c | 36 +++++++++---------- xen/arch/x86/guest/hyperv/hyperv.c | 4 +-- xen/arch/x86/guest/hypervisor.c | 2 +- xen/arch/x86/guest/xen/xen.c | 4 +-- xen/arch/x86/include/asm/e820.h | 3 +- xen/arch/x86/include/asm/guest/hypervisor.h | 2 +- xen/arch/x86/include/asm/mpspec.h | 1 - xen/arch/x86/include/asm/pv/shim.h | 2 +- xen/arch/x86/pv/shim.c | 10 +++--- xen/arch/x86/setup.c | 8 ++--- xen/arch/x86/x86_64/mmconf-fam10h.c | 2 +- xen/arch/x86/xstate.c | 30 ++++++++-------- xen/drivers/passthrough/amd/iommu_acpi.c | 2 +- xen/include/public/arch-x86/xen-mca.h | 38 ++++++++++----------- xen/include/xen/delay.h | 9 +++-- 15 files changed, 78 insertions(+), 75 deletions(-)
Signature · 1 line
2.34.1
PATCH v2 1/5 x86: address MISRA C:2012 Rule 5.3
Address some occurrences of shadowing between the global variable 'e820' in 'xen/arch/x86/e820.c' and function parameter names (such as that of 'e820_add_range').
The parameter is removed in those functions whose call chain ultimately supplies the global variable as a parameter, which is already visible from their definitions in 'e820.c'.
---
Changes in v2:
- Reworked the patch to remove the parameter e820 where possible and consequential changes to the involved functions.
--- xen/arch/x86/e820.c | 36 ++++++++++----------- xen/arch/x86/guest/hyperv/hyperv.c | 4 +-- xen/arch/x86/guest/hypervisor.c | 2 +- xen/arch/x86/guest/xen/xen.c | 4 +-- xen/arch/x86/include/asm/e820.h | 3 +- xen/arch/x86/include/asm/guest/hypervisor.h | 2 +- xen/arch/x86/include/asm/pv/shim.h | 2 +- xen/arch/x86/pv/shim.c | 10 +++--- xen/arch/x86/setup.c | 8 ++--- xen/arch/x86/x86_64/mmconf-fam10h.c | 2 +- xen/drivers/passthrough/amd/iommu_acpi.c | 2 +- 11 files changed, 37 insertions(+), 38 deletions(-)
xen/arch/x86/e820.c +18 -18
@@ -543,27 +543,27 @@ static void __init machine_specific_memory_setup(struct e820map *raw)clip_to_limit (top_of_ram,"MTRRs do not cover all of memory." ); } -/* This function relies on the passed in e820->map[] being sorted. */ -int __init e820_add_range ( -struct e820map *e820,uint64_t s,uint64_t e,uint32_t type) +/* This function relies on the global e820->map[] being sorted. */ +int __init e820_add_range (uint64_t s,uint64_t e,uint32_t type) {unsigned int i; +struct e820entry *ei = e820.map; -for ( i =0 ; i < e820->nr_map; ++i ) +for ( i =0 ; i < e820.nr_map; ++i ) { -uint64_t rs = e820->map[i].addr; -uint64_t re = rs + e820->map[i].size; +uint64_t rs = ei[i].addr; +uint64_t re = rs + ei[i].size; -if ( rs == e && e820->map[i].type == type ) +if ( rs == e && ei[i].type == type ) { - e820->map[i].addr = s; + ei[i].addr = s;return 1 ; } -if ( re == s && e820->map[i].type == type && - (i +1 == e820->nr_map || e820->map[i +1 ].addr >= e) ) +if ( re == s && ei[i].type == type && + (i +1 == e820.nr_map || ei[i +1 ].addr >= e) ) { - e820->map[i].size += e - s; + ei[i].size += e - s;return 1 ; }
@@ -574,20 +574,20 @@ int __init e820_add_range(return 0 ; } -if ( e820->nr_map >=ARRAY_SIZE (e820->map) ) +if ( e820.nr_map >=ARRAY_SIZE (e820.map) ) {printk (XENLOG_WARNING "E820: overflow while adding region" " %" PRIx64"-%" PRIx64"\n" , s, e);return 0 ; } -memmove (e820->map + i +1 , e820->map + i, - (e820->nr_map - i) *sizeof (*e820->map)); +memmove (ei + i +1 , ei + i, + (e820.nr_map - i) *sizeof (*e820.map)); - e820->nr_map++; - e820->map[i].addr = s; - e820->map[i].size = e - s; - e820->map[i].type = type; + e820.nr_map++; + ei[i].addr = s; + ei[i].size = e - s; + ei[i].type = type;return 1 ; }
xen/arch/x86/guest/hyperv/hyperv.c +2 -2
@@ -187,11 +187,11 @@ static int cf_check ap_setup(void)return setup_vp_assist (); } -static void __init cf_check e820_fixup(struct e820map *e820) +static void __init cf_check e820_fixup(void) {uint64_t s =HV_HCALL_MFN <<PAGE_SHIFT ; -if ( !e820_add_range (e820, s, s +PAGE_SIZE ,E820_RESERVED ) ) +if ( !e820_add_range (s, s +PAGE_SIZE ,E820_RESERVED ) )panic ("Unable to reserve Hyper-V hypercall range\n" ); }
xen/arch/x86/guest/hypervisor.c +1 -1
@@ -63,7 +63,7 @@ void hypervisor_resume(void)void __init hypervisor_e820_fixup (struct e820map *e820) {if ( ops.e820_fixup ) - ops.e820_fixup (e820); + ops.e820_fixup (); } int hypervisor_flush_tlb(const cpumask_t *mask, const void *va,
xen/arch/x86/guest/xen/xen.c +2 -2
@@ -306,10 +306,10 @@ static void cf_check resume(void)pv_console_init (); } -static void __init cf_check e820_fixup(struct e820map *e820) +static void __init cf_check e820_fixup() {if ( pv_shim ) -pv_shim_fixup_e820 (e820); +pv_shim_fixup_e820 (); } static int cf_check flush_tlb(
xen/arch/x86/include/asm/e820.h +1 -2
@@ -29,8 +29,7 @@ extern int reserve_e820_ram(struct e820map *e820, uint64_t s, uint64_t e);extern int e820_change_range_type (struct e820map *e820,uint64_t s,uint64_t e,uint32_t orig_type,uint32_t new_type); -extern int e820_add_range ( -struct e820map *,uint64_t s,uint64_t e,uint32_t type); +extern int e820_add_range (uint64_t s,uint64_t e,uint32_t type);extern unsigned long init_e820 (const char *str,struct e820map *raw);extern void print_e820_memory_map (const struct e820entry *map,unsigned int entries);
xen/arch/x86/include/asm/guest/hypervisor.h +1 -1
@@ -22,7 +22,7 @@ struct hypervisor_ops {/* Resume from suspension */ void (*resume)(void );/* Fix up e820 map */ -void (*e820_fixup)(struct e820map *e820); +void (*e820_fixup)(void );/* L0 assisted TLB flush */ int (*flush_tlb)(const cpumask_t *mask,const void *va,unsigned int flags); };
xen/arch/x86/include/asm/pv/shim.h +1 -1
@@ -85,7 +85,7 @@ static inline uint64_t pv_shim_mem(uint64_t avail)ASSERT_UNREACHABLE ();return 0 ; } -static inline void pv_shim_fixup_e820 (struct e820map *e820) +static inline void pv_shim_fixup_e820 (void ) {ASSERT_UNREACHABLE (); }
xen/arch/x86/pv/shim.c +5 -5
@@ -98,17 +98,17 @@ uint64_t pv_shim_mem(uint64_t avail)return shim_nrpages; } -static void __init mark_pfn_as_ram (struct e820map *e820,uint64_t pfn) +static void __init mark_pfn_as_ram (uint64_t pfn) { -if ( !e820_add_range (e820, pfn <<PAGE_SHIFT , +if ( !e820_add_range (pfn <<PAGE_SHIFT , (pfn <<PAGE_SHIFT ) +PAGE_SIZE ,E820_RAM ) && - !e820_change_range_type (e820, pfn <<PAGE_SHIFT , + !e820_change_range_type (&e820, pfn <<PAGE_SHIFT , (pfn <<PAGE_SHIFT ) +PAGE_SIZE ,E820_RESERVED ,E820_RAM ) )panic ("Unable to add/change memory type of pfn %#lx to RAM\n" , pfn); } -void __init pv_shim_fixup_e820 (struct e820map *e820) +void __init pv_shim_fixup_e820 (void ) {uint64_t pfn =0 ;unsigned int i =0 ;
@@ -120,7 +120,7 @@ void __init pv_shim_fixup_e820(struct e820map *e820) rc =xen_hypercall_hvm_get_param (p, &pfn); \ if ( rc ) \ panic("Unable to get " #p "\n"); \ - mark_pfn_as_ram(e820, pfn); \ + mark_pfn_as_ram(pfn); \ ASSERT(i < ARRAY_SIZE(reserved_pages)); \ reserved_pages[i++].mfn = pfn; \ })
xen/arch/x86/setup.c +4 -4
@@ -686,7 +686,7 @@ static void __init parse_video_info(void)#endif } -static void __init kexec_reserve_area (struct e820map *e820) +static void __init kexec_reserve_area (void ) {#ifdef CONFIG_KEXEC unsigned long kdump_start = kexec_crash_area.start;
@@ -700,7 +700,7 @@ static void __init kexec_reserve_area(struct e820map *e820) is_reserved = true; -if ( !reserve_e820_ram (e820, kdump_start, kdump_start + kdump_size) ) +if ( !reserve_e820_ram (&boot_e820, kdump_start, kdump_start + kdump_size) ) {printk ("Kdump: DISABLED (failed to reserve %luMB (%lukB) at %#lx)" "\n" , kdump_size >>20 , kdump_size >>10 , kdump_start);
@@ -1308,7 +1308,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)if ( e820.map[i].type ==E820_RAM ) nr_pages += e820.map[i].size >>PAGE_SHIFT ;set_kexec_crash_area_size ((u64 )nr_pages <<PAGE_SHIFT ); -kexec_reserve_area (&boot_e820); +kexec_reserve_area (); initial_images = mod; nr_initial_images = mbi->mods_count;
@@ -1495,7 +1495,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)reserve_e820_ram (&boot_e820,__pa (_stext),__pa (__2M_rwdata_end));/* Late kexec reservation (dynamic start address). */ -kexec_reserve_area (&boot_e820); +kexec_reserve_area ();setup_max_pdx (raw_max_page);if ( highmem_start )
xen/arch/x86/x86_64/mmconf-fam10h.c +1 -1
@@ -135,7 +135,7 @@ static void __init get_fam10h_pci_mmconf_base(void)return ; out: -if (e820_add_range (&e820, start, start +SIZE ,E820_RESERVED )) +if (e820_add_range (start, start +SIZE ,E820_RESERVED )) fam10h_pci_mmconf_base = start; }
xen/drivers/passthrough/amd/iommu_acpi.c +1 -1
@@ -418,7 +418,7 @@ static int __init parse_ivmd_block(const struct acpi_ivrs_memory *ivmd_block)if ( type ==RAM_TYPE_UNKNOWN ) { -if (e820_add_range (&e820, addr, addr +PAGE_SIZE , +if (e820_add_range (addr, addr +PAGE_SIZE ,E820_RESERVED ) )continue ; AMD_IOMMU_ERROR("IVMD: page at %lx couldn't be reserved\n",
Signature · 1 line
2.34.1
Quoted 59 lines · Nicola Vetrini
xen/arch/x86/e820.c +14
-15@@ -543,27 +543,27 @@ static void __init machine_specific_memory_setup(struct e820map *raw)clip_to_limit (top_of_ram,"MTRRs do not cover all of memory." ); } -/* This function relies on the passed in e820->map[] being sorted. */ -int __init e820_add_range ( -struct e820map *e820,uint64_t s,uint64_t e,uint32_t type) +/* This function relies on the global e820->map[] being sorted. */ +int __init e820_add_range (uint64_t s,uint64_t e,uint32_t type) {unsigned int i; +struct e820entry *ei = e820.map; -for ( i =0 ; i < e820->nr_map; ++i ) +for ( i =0 ; i < e820.nr_map; ++i ) { -uint64_t rs = e820->map[i].addr; -uint64_t re = rs + e820->map[i].size; +uint64_t rs = ei[i].addr; +uint64_t re = rs + ei[i].size; -if ( rs == e && e820->map[i].type == type ) +if ( rs == e && ei[i].type == type ) { - e820->map[i].addr = s; + ei[i].addr = s;return 1 ; } -if ( re == s && e820->map[i].type == type && - (i +1 == e820->nr_map || e820->map[i +1 ].addr >= e) ) +if ( re == s && ei[i].type == type && + (i +1 == e820.nr_map || ei[i +1 ].addr >= e) ) { - e820->map[i].size += e - s; + ei[i].size += e - s;return 1 ; }@@ -574,20 +574,20 @@ int __init e820_add_range(return 0 ; } -if ( e820->nr_map >=ARRAY_SIZE (e820->map) ) +if ( e820.nr_map >=ARRAY_SIZE (e820.map) ) {printk (XENLOG_WARNING "E820: overflow while adding region" " %" PRIx64"-%" PRIx64"\n" , s, e);return 0 ; } -memmove (e820->map + i +1 , e820->map + i, - (e820->nr_map - i) *sizeof (*e820->map)); +memmove (ei + i +1 , ei + i, + (e820.nr_map - i) *sizeof (*e820.map)); - e820->nr_map++;
xen/arch/x86/e820.c int __init e820_add_range( · line 593
Quoted 10 lines
xen/arch/x86/e820.c +4
-3- e820->map[i].addr = s; - e820->map[i].size = e - s; - e820->map[i].type = type; + e820.nr_map++; + ei[i].addr = s; + ei[i].size = e - s; + ei[i].type = type;return 1 ; }
To be honest this isn't quite what I was hoping for; the many ei[i]. are (imo) quite a bit harder to read than ei-> would have been (hence my earlier suggestion to also update that pointer in the for() loop header). Then again I see there is one use of ei[i + 1], which would likely look less neat as ei[1].addr when everywhere else we have ei->. So I guess up to you whether you adjust further; I'll ack either form.
xen/arch/x86/guest/hypervisor.c void hypervisor_resume(void) · line 63
Quoted 4 lines
xen/arch/x86/guest/hypervisor.c +0
-0@@ -63,7 +63,7 @@ void hypervisor_resume(void)void __init hypervisor_e820_fixup (struct e820map *e820)
What about this one? The function parameter ...
xen/arch/x86/guest/hypervisor.c void hypervisor_resume(void) · line 67
Quoted 5 lines
xen/arch/x86/guest/hypervisor.c +1
-1{if ( ops.e820_fixup ) - ops.e820_fixup (e820); + ops.e820_fixup (); }
... isn't used anymore, and the sole call site passes &e820.
xen/arch/x86/include/asm/e820.h extern int reserve_e820_ram(struct e820map *e820, uint64_t s, uint64_t e); · line 31
Quoted 6 lines
xen/arch/x86/include/asm/e820.h +0
-0@@ -29,8 +29,7 @@ extern int reserve_e820_ram(struct e820map *e820, uint64_t s, uint64_t e);extern int e820_change_range_type (struct e820map *e820,uint64_t s,uint64_t e,uint32_t orig_type,uint32_t new_type);
And what about this one? None of the other subjects in the series suggest this is then taken care of in a separate patch (as per the earlier discussion it indeed doesn't want dealing with right here).
Quoted 30 lines
xen/arch/x86/setup.c +3
-3@@ -686,7 +686,7 @@ static void __init parse_video_info(void)#endif } -static void __init kexec_reserve_area (struct e820map *e820) +static void __init kexec_reserve_area (void ) {#ifdef CONFIG_KEXEC unsigned long kdump_start = kexec_crash_area.start;@@ -700,7 +700,7 @@ static void __init kexec_reserve_area(struct e820map *e820) is_reserved = true; -if ( !reserve_e820_ram (e820, kdump_start, kdump_start + kdump_size) ) +if ( !reserve_e820_ram (&boot_e820, kdump_start, kdump_start + kdump_size) ) {printk ("Kdump: DISABLED (failed to reserve %luMB (%lukB) at %#lx)" "\n" , kdump_size >>20 , kdump_size >>10 , kdump_start);@@ -1308,7 +1308,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)if ( e820.map[i].type ==E820_RAM ) nr_pages += e820.map[i].size >>PAGE_SHIFT ;set_kexec_crash_area_size ((u64 )nr_pages <<PAGE_SHIFT ); -kexec_reserve_area (&boot_e820); +kexec_reserve_area (); initial_images = mod; nr_initial_images = mbi->mods_count;
xen/arch/x86/setup.c void __init noreturn __start_xen(unsigned long mbi_p) · line 1501
Quoted 8 lines
xen/arch/x86/setup.c +1
-1@@ -1495,7 +1495,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)reserve_e820_ram (&boot_e820,__pa (_stext),__pa (__2M_rwdata_end));/* Late kexec reservation (dynamic start address). */ -kexec_reserve_area (&boot_e820); +kexec_reserve_area ();setup_max_pdx (raw_max_page);if ( highmem_start )
Seeing all the knock-on effects for the add_range() change, I think this separate adjustment would better have been an independent patch.
Jan
Quoted 70 lines · Jan Beulich
Quoted 69 lines · Nicola Vetrini
xen/arch/x86/e820.c +11
-11@@ -543,27 +543,27 @@ static void __init machine_specific_memory_setup(struct e820map *raw) clip_to_limit(top_of_ram, "MTRRs do not cover all of memory."); } -/* This function relies on the passed in e820->map[] being sorted. */ -int __init e820_add_range( - struct e820map *e820, uint64_t s, uint64_t e, uint32_t type) +/* This function relies on the global e820->map[] being sorted. */ +int __init e820_add_range(uint64_t s, uint64_t e, uint32_t type) {unsigned int i; +struct e820entry *ei = e820.map; -for ( i =0 ; i < e820->nr_map; ++i ) +for ( i =0 ; i < e820.nr_map; ++i ) { -uint64_t rs = e820->map[i].addr; -uint64_t re = rs + e820->map[i].size; +uint64_t rs = ei[i].addr; +uint64_t re = rs + ei[i].size; -if ( rs == e && e820->map[i].type == type ) +if ( rs == e && ei[i].type == type ) { - e820->map[i].addr = s; + ei[i].addr = s;return 1 ; } -if ( re == s && e820->map[i].type == type && - (i +1 == e820->nr_map || e820->map[i +1 ].addr >= e) ) +if ( re == s && ei[i].type == type && + (i +1 == e820.nr_map || ei[i +1 ].addr >= e) ) { - e820->map[i].size += e - s; + ei[i].size += e - s;return 1 ;}xen/arch/x86/e820.c +7
-7@@ -574,20 +574,20 @@ int __init e820_add_range(return 0 ; } -if ( e820->nr_map >=ARRAY_SIZE (e820->map) ) +if ( e820.nr_map >=ARRAY_SIZE (e820.map) ) {printk (XENLOG_WARNING "E820: overflow while adding region" " %" PRIx64"-%" PRIx64"\n" , s, e);return 0 ; } -memmove (e820->map + i +1 , e820->map + i, - (e820->nr_map - i) *sizeof (*e820->map)); +memmove (ei + i +1 , ei + i, + (e820.nr_map - i) *sizeof (*e820.map)); - e820->nr_map++; - e820->map[i].addr = s; - e820->map[i].size = e - s; - e820->map[i].type = type; + e820.nr_map++; + ei[i].addr = s; + ei[i].size = e - s; + ei[i].type = type;
Quoted 10 lines
xen/arch/x86/e820.c int __init e820_add_range( · line 593
Quoted 2 lines
xen/arch/x86/e820.c +0
-0return 1 ; }To be honest this isn't quite what I was hoping for; the many ei[i]. are (imo) quite a bit harder to read than ei-> would have been (hence my earlier suggestion to also update that pointer in the
for()loop header). Then again I see there is one use of ei[i + 1], which would likely look less neat as ei[1].addr when everywhere else we have ei->. So I guess up to you whether you adjust further; I'll ack either form.
I'll leave it as is.
Quoted 7 lines
xen/arch/x86/guest/hypervisor.c void hypervisor_resume(void) · line 63
Quoted 4 lines
xen/arch/x86/guest/hypervisor.c +0
-0@@ -63,7 +63,7 @@ void hypervisor_resume(void)void __init hypervisor_e820_fixup (struct e820map *e820)What about this one? The function parameter ...
Quoted 8 lines
xen/arch/x86/guest/hypervisor.c void hypervisor_resume(void) · line 67
Quoted 5 lines
xen/arch/x86/guest/hypervisor.c +1
-1{if ( ops.e820_fixup ) - ops.e820_fixup (e820); + ops.e820_fixup (); }... isn't used anymore, and the sole call site passes &e820.
It remained there by accident.
Quoted 12 lines
xen/arch/x86/include/asm/e820.h extern int reserve_e820_ram(struct e820map *e820, · line 32
Quoted 7 lines
xen/arch/x86/include/asm/e820.h +0
-0@@ -29,8 +29,7 @@ extern int reserve_e820_ram(struct e820map *e820, uint64_t s, uint64_t e);extern int e820_change_range_type (struct e820map *e820,uint64_t s,uint64_t e,uint32_t orig_type,uint32_t new_type);And what about this one? None of the other subjects in the series suggest this is then taken care of in a separate patch (as per the earlier discussion it indeed doesn't want dealing with right here).
I'll mention this detail. While I work on other rules I'll think of a good way to rename.
Quoted 44 lines
Quoted 44 lines
xen/arch/x86/setup.c +2
-2@@ -686,7 +686,7 @@ static void __init parse_video_info(void)#endif } -static void __init kexec_reserve_area (struct e820map *e820) +static void __init kexec_reserve_area (void ) {#ifdef CONFIG_KEXEC unsigned long kdump_start = kexec_crash_area.start;@@ -700,7 +700,7 @@ static void __init kexec_reserve_area(struct e820map *e820) is_reserved = true; -if ( !reserve_e820_ram (e820, kdump_start, kdump_start + kdump_size) ) +if ( !reserve_e820_ram (&boot_e820, kdump_start, kdump_start + kdump_size) ){
printk("Kdump: DISABLED (failed to reserve %luMB (%lukB) at
%#lx)""\n", kdump_size >> 20, kdump_size >> 10,
kdump_start);xen/arch/x86/setup.c +1
-1@@ -1308,7 +1308,7 @@ void __init noreturn __start_xen(unsigned long mbi_p)if ( e820.map[i].type ==E820_RAM ) nr_pages += e820.map[i].size >>PAGE_SHIFT ;set_kexec_crash_area_size ((u64 )nr_pages <<PAGE_SHIFT ); -kexec_reserve_area (&boot_e820); +kexec_reserve_area (); initial_images = mod;nr_initial_images = mbi->mods_count;xen/arch/x86/setup.c +1
-1@@ -1495,7 +1495,7 @@ void __init noreturn __start_xen(unsigned long mbi_p) reserve_e820_ram(&boot_e820, __pa(_stext),__pa (__2M_rwdata_end ));/* Late kexec reservation (dynamic start address). */ -kexec_reserve_area (&boot_e820); +kexec_reserve_area ();
Quoted 7 lines
Quoted 2 lines
setup_max_pdx(raw_max_page);
if (highmem_start)Seeing all the knock-on effects for the
add_range()change, I think this separate adjustment would better have been an independent patch.Jan
I can submit it standalone and put together x86/vmsi and delay
Signature · 2 lines
Nicola Vetrini, BSc Software Engineer, BUGSENG srl (https://bugseng.com)
PATCH v2 2/5 xen/delay: address MISRA C:2012 Rule 5.3.
In reply to Nicola VetriniThe variable 'msec' declared in the macro shadows the local variable in 'ehci_dbgp_bios_handoff', but to prevent any future clashes with other functions the macro is converted to a static inline function.
No functional change.
---
Changes in v2:
- Switched to a static inline function, as suggested by Julien
--- xen/include/xen/delay.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
xen/include/xen/delay.h +7 -2
@@ -4,7 +4,12 @@/* Copyright (C) 1993 Linus Torvalds */ #include <asm/delay.h> -#define mdelay (n) (\ - {unsigned long msec=(n); while (msec--) udelay(1000);}) + +static inline void mdelay (unsigned long n) +{ +unsigned long msec=n; +while ( msec-- ) +udelay (1000 ); +}#endif /* defined(_LINUX_DELAY_H) */
Signature · 1 line
2.34.1
Re: [XEN PATCH v2 2/5] xen/delay: address MISRA C:2012 Rule 5.3.
Quoted 5 lines · Nicola Vetrini
xen/include/xen/delay.h +0
-0@@ -4,7 +4,12 @@/* Copyright (C) 1993 Linus Torvalds */
xen/include/xen/delay.h line 13
Quoted 10 lines
xen/include/xen/delay.h +7
-2#include <asm/delay.h> -#define mdelay (n) (\ - {unsigned long msec=(n); while (msec--) udelay(1000);}) + +static inline void mdelay (unsigned long n) +{ +unsigned long msec=n; +while ( msec-- ) +udelay (1000 ); +}
Nit: Style (blanks around = and blank line between declaration and statement). If need be I guess this again can be taken care of while committing. With the adjustments
Jan
Re: [XEN PATCH v2 2/5] xen/delay: address MISRA C:2012 Rule 5.3.
Quoted 20 lines · Jan Beulich
Quoted 5 lines · Nicola Vetrini
xen/include/xen/delay.h +0
-0@@ -4,7 +4,12 @@/* Copyright (C) 1993 Linus Torvalds */ xen/include/xen/delay.h line 13
Quoted 10 lines
xen/include/xen/delay.h +7
-2#include <asm/delay.h> -#define mdelay (n) (\ - {unsigned long msec=(n); while (msec--) udelay(1000);}) + +static inline void mdelay (unsigned long n) +{ +unsigned long msec=n; +while ( msec-- ) +udelay (1000 ); +}Nit: Style (blanks around = and blank line between declaration and statement). If need be I guess this again can be taken care of while committing. With the adjustments
Quoted 1 line
Acked-by Jan Beulich <[email protected]>
Actually - why have a local variable here at all? Just name the function parameter "msec".
Jan
PATCH v2 3/5 x86/include: address MISRA C:2012 Rule 5.3.
In reply to Nicola VetriniVariable 'mpc_default_type' in 'xen/arch/x86/include/asm/mpspec.h' has no uses and causes shadowing with function parameter names in 'mpparse.c'. Therefore, it is removed.
No functional changes.
---
Changes in v2:
- Removed the variable.
--- xen/arch/x86/include/asm/mpspec.h | 1 - 1 file changed, 1 deletion(-)
xen/arch/x86/include/asm/mpspec.h +0 -1
@@ -15,7 +15,6 @@ extern void get_smp_config (void);extern unsigned char apic_version [MAX_APICS ];extern int mp_irq_entries;extern struct mpc_config_intsrc mp_irqs [MAX_IRQ_SOURCES ]; -extern int mpc_default_type;extern unsigned long mp_lapic_addr;extern bool pic_mode;
Signature · 1 line
2.34.1
Re: [XEN PATCH v2 3/5] x86/include: address MISRA C:2012 Rule 5.3.
Quoted 3 lines · Nicola Vetrini
Variable '
mpc_default_type' in 'xen/arch/x86/include/asm/mpspec.h' has no uses and causes shadowing with function parameter names in 'mpparse.c'. Therefore, it is removed.
Personally I'd again wish this could be expressed more precisely than just "variable". What you're removing is a declaration which has no definition. So aiui shadowing is only one of the concerns Misra would have here; the lack of a definition would be another.
Quoted 3 lines
No functional changes.
Signed-off-by Nicola Vetrini <[email protected]>
PATCH v2 4/5 x86/xstate: address MISRA C:2012 Rule 5.3
In reply to Nicola VetriniRename the local variables s/xsave/xstate/ to avoid clashing with function 'xsave' defined in 'xen/arch/x86/include/asm/xstate.h'.
No functional changes.
---
Changes in v2:
- s/xsave_area/xstate/, since that is the newest common name, also used in other parts of the modified file.
--- xen/arch/x86/xstate.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
xen/arch/x86/xstate.c +15 -15
@@ -174,10 +174,10 @@ static void setup_xstate_comp(uint16_t *comp_offsets,*/ void expand_xsave_states (const struct vcpu *v,void *dest,unsigned int size) { -const struct xsave_struct *xsave = v->arch.xsave_area; +const struct xsave_struct *xstate = v->arch.xsave_area;const void *src;uint16_t comp_offsets[sizeof (xfeature_mask)*8 ]; -u64 xstate_bv = xsave->xsave_hdr.xstate_bv; +u64 xstate_bv = xstate->xsave_hdr.xstate_bv;u64 valid;/* Check there is state to serialise (i.e. at least an XSAVE_HDR) */
@@ -185,19 +185,19 @@ void expand_xsave_states(const struct vcpu *v, void *dest, unsigned int size)/* Check there is the correct room to decompress into. */ BUG_ON (size !=xstate_ctxt_size (v->arch.xcr0_accum)); -if ( !(xsave->xsave_hdr.xcomp_bv &XSTATE_COMPACTION_ENABLED ) ) +if ( !(xstate->xsave_hdr.xcomp_bv &XSTATE_COMPACTION_ENABLED ) ) { -memcpy (dest, xsave, size); +memcpy (dest, xstate, size);return ; } -ASSERT (xsave_area_compressed (xsave)); -setup_xstate_comp (comp_offsets, xsave->xsave_hdr.xcomp_bv); +ASSERT (xsave_area_compressed (xstate)); +setup_xstate_comp (comp_offsets, xstate->xsave_hdr.xcomp_bv);/* * Copy legacy XSAVE area and XSAVE hdr area. */ -memcpy (dest, xsave,XSTATE_AREA_MIN_SIZE ); +memcpy (dest, xstate,XSTATE_AREA_MIN_SIZE );memset (dest +XSTATE_AREA_MIN_SIZE ,0 , size -XSTATE_AREA_MIN_SIZE ); ((struct xsave_struct *)dest)->xsave_hdr.xcomp_bv =0 ;
@@ -206,7 +206,7 @@ void expand_xsave_states(const struct vcpu *v, void *dest, unsigned int size)* Copy each region from the possibly compacted offset to the * non-compacted offset. */ - src = xsave; + src = xstate; valid = xstate_bv & ~XSTATE_FP_SSE ;while ( valid ) {
@@ -239,7 +239,7 @@ void expand_xsave_states(const struct vcpu *v, void *dest, unsigned int size)*/ void compress_xsave_states (struct vcpu *v,const void *src,unsigned int size) { -struct xsave_struct *xsave = v->arch.xsave_area; +struct xsave_struct *xstate = v->arch.xsave_area;void *dest;uint16_t comp_offsets[sizeof (xfeature_mask)*8 ];u64 xstate_bv, valid;
@@ -252,7 +252,7 @@ void compress_xsave_states(struct vcpu *v, const void *src, unsigned int size)if ( !(v->arch.xcr0_accum &XSTATE_XSAVES_ONLY ) ) { -memcpy (xsave, src, size); +memcpy (xstate, src, size);return ; }
@@ -260,19 +260,19 @@ void compress_xsave_states(struct vcpu *v, const void *src, unsigned int size)* Copy legacy XSAVE area, to avoid complications with CPUID * leaves 0 and 1 in the loop below. */ -memcpy (xsave, src,FXSAVE_SIZE ); +memcpy (xstate, src,FXSAVE_SIZE );/* Set XSTATE_BV and XCOMP_BV. */ - xsave->xsave_hdr.xstate_bv = xstate_bv; - xsave->xsave_hdr.xcomp_bv = v->arch.xcr0_accum |XSTATE_COMPACTION_ENABLED ; + xstate->xsave_hdr.xstate_bv = xstate_bv; + xstate->xsave_hdr.xcomp_bv = v->arch.xcr0_accum |XSTATE_COMPACTION_ENABLED ; -setup_xstate_comp (comp_offsets, xsave->xsave_hdr.xcomp_bv); +setup_xstate_comp (comp_offsets, xstate->xsave_hdr.xcomp_bv);/* * Copy each region from the non-compacted offset to the * possibly compacted offset. */ - dest = xsave; + dest = xstate; valid = xstate_bv & ~XSTATE_FP_SSE ;while ( valid ) {
Signature · 1 line
2.34.1
Re: [XEN PATCH v2 4/5] x86/xstate: address MISRA C:2012 Rule 5.3
Quoted 2 lines · Nicola Vetrini
Rename the local variables s/xsave/xstate/ to avoid clashing with function 'xsave' defined in '
xen/arch/x86/include/asm/xstate.h'.
s/defined/declared/ (in some areas of Misra the distinction looks to be quite relevant, so being precise everywhere is helpful even if only to not leave uncertainty)
Quoted 3 lines
No functional changes.
Signed-off-by Nicola Vetrini <[email protected]>
PATCH v2 5/5 x86: refactor macros in 'xen-mca.h'
In reply to Nicola VetriniThe macros defined 'xen/include/public/arch-x86/xen-mca.h' are revised to address the following concerns:
- needless underscore prefixes for parameter names;
- the variable 'i' in function 'mce_action' that is shadowed by the local variable in the macro.
Therefore, the refactoring aims to resolve present shadowing issues, which violate MISRA C:2012 Rule 5.3, and lessen the probability of future ones with some renames.
No functional change.
---
Changes in v2:
- Added missing parentheses.
- Clarified commit message.
--- xen/include/public/arch-x86/xen-mca.h | 38 +++++++++++++-------------- 1 file changed, 19 insertions(+), 19 deletions(-)
xen/include/public/arch-x86/xen-mca.h +19 -19
@@ -280,39 +280,39 @@ DEFINE_XEN_GUEST_HANDLE(xen_mc_logical_cpu_t);/* Prototype: * uint32_t x86_mcinfo_nentries(struct mc_info *mi); */ -#define x86_mcinfo_nentries (_mi) \ - (_mi)->mi_nentries +#define x86_mcinfo_nentries (mi) \ + (mi)->mi_nentries/* Prototype: * struct mcinfo_common *x86_mcinfo_first(struct mc_info *mi); */ -#define x86_mcinfo_first (_mi) \ - ((struct mcinfo_common *)(_mi)->mi_data) +#define x86_mcinfo_first (mi) \ + ((struct mcinfo_common *)(mi)->mi_data)/* Prototype: * struct mcinfo_common *x86_mcinfo_next(struct mcinfo_common *mic); */ -#define x86_mcinfo_next (_mic) \ - ((struct mcinfo_common *)((uint8_t *)(_mic) + (_mic)->size)) +#define x86_mcinfo_next (mic) \ + ((struct mcinfo_common *)((uint8_t *)(mic) + (mic)->size))/* Prototype: -* void x86_mcinfo_lookup(void *ret, struct mc_info *mi, uint16_t type); +* void x86_mcinfo_lookup(void *ret, struct mc_info *mi, uint16_t mc_type); */ -#define x86_mcinfo_lookup (_ret, _mi, _type) \ +#define x86_mcinfo_lookup (ret, mi, mc_type) \ do { \ - uint32_t found, i; \ - struct mcinfo_common *_mic; \ + uint32_t found_, i_; \ + struct mcinfo_common *mic_; \ \ - found = 0; \ - (_ret) = NULL; \ - if (_mi == NULL) break; \ - _mic = x86_mcinfo_first(_mi); \ - for (i = 0; i < x86_mcinfo_nentries(_mi); i++) { \ - if (_mic->type == (_type)) { \ - found = 1; \ + found_ = 0; \ + (ret) = NULL; \ + if ((mi) == NULL) break; \ + mic_ = x86_mcinfo_first(mi); \ + for (i_ = 0; i_ < x86_mcinfo_nentries(mi); i_++) { \ + if (mic_->type == (mc_type)) { \ + found_ = 1; \ break; \ } \ - _mic = x86_mcinfo_next(_mic); \ + mic_ = x86_mcinfo_next(mic_); \ } \ - (_ret) = found ? _mic : NULL; \ + (ret) = found_ ? mic_ : NULL; \ } while (0)
Signature · 1 line
2.34.1
Re: [XEN PATCH v2 5/5] x86: refactor macros in 'xen-mca.h'
Quoted 10 lines · Nicola Vetrini
The macros defined '
xen/include/public/arch-x86/xen-mca.h' are revised to address the following concerns:
- needless underscore prefixes for parameter names;
- the variable 'i' in function 'mce_action' that is shadowed by the local variable in the macro.Therefore, the refactoring aims to resolve present shadowing issues, which violate MISRA C:2012 Rule 5.3, and lessen the probability of future ones with some renames.
Quoted 8 lines
No functional change.
Signed-off-by Nicola Vetrini <[email protected]>---
Changes in v2:
- Added missing parentheses.
- Clarified commit message.
---
Missing a
from the other version, since nothing changed code-wise.
Signature · 2 lines
Nicola Vetrini, BSc Software Engineer, BUGSENG srl (https://bugseng.com)
Re: [XEN PATCH v2 5/5] x86: refactor macros in 'xen-mca.h'
Quoted 11 lines · Nicola Vetrini
Quoted 10 lines · Nicola Vetrini
The macros defined '
xen/include/public/arch-x86/xen-mca.h' are revised to address the following concerns:
- needless underscore prefixes for parameter names;
- the variable 'i' in function 'mce_action' that is shadowed by the local variable in the macro.Therefore, the refactoring aims to resolve present shadowing issues, which violate MISRA C:2012 Rule 5.3, and lessen the probability of future ones with some renames.
Quoted 6 lines
Quoted 6 lines
No functional change.
Signed-off-by Nicola Vetrini <[email protected]>---
Changes in v2:
- Added missing parentheses.
This ...
Quoted 6 lines
Quoted 2 lines
- Clarified commit message.
---Missing a
Reviewed-by Stefano Stabellini <[email protected]>from the other version, since nothing changed code-wise.
... isn't exactly "nothing", but well.
Jan
Re: [XEN PATCH v2 5/5] x86: refactor macros in 'xen-mca.h'
In reply to Nicola VetriniQuoted 6 lines · Nicola Vetrini
The macros defined '
xen/include/public/arch-x86/xen-mca.h' are revised to address the following concerns:
- needless underscore prefixes for parameter names;
- the variable 'i' in function 'mce_action' that is shadowed by the local variable in the macro.
Quoted 7 lines
Therefore, the refactoring aims to resolve present shadowing issues, which violate MISRA C:2012 Rule 5.3, and lessen the probability of future ones with some renames.
No functional change.
Signed-off-by Nicola Vetrini <[email protected]>