perf/x86/amd: Miscellaneous fixes
Subsystems (2)
cover perf/x86/amd: Miscellaneous fixes
Contains fixes w.r.t usage of LBR Freeze, Erratum 1452 and a bug in the CPU offline path where PMU-related registers are reset.
Sandipan Das (3):
perf/x86/amd/lbr: Use freeze based on availability perf/x86/amd/lbr: Discard erroneous branch entries perf/x86/amd/core: Avoid register reset when CPU is dead
arch/x86/events/amd/core.c | 5 ++--- arch/x86/events/amd/lbr.c | 22 ++++++++++++++-------- arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/kernel/cpu/scattered.c | 1 + 4 files changed, 18 insertions(+), 12 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/3 perf/x86/amd/lbr: Use freeze based on availability
Currently, it is assumed that LBR Freeze is supported on all processors which have CPUID leaf 0x80000022[EAX] bit 1 set. This is incorrect as the feature availability is additionally dependent on CPUID leaf 0x80000022[EAX] bit 2 being set which may not be set for all Zen 4 processors. Define a new feature bit for LBR and PMC freeze and set the freeze enable bit (FLBRI) in DebugCtl (MSR 0x1d9) conditionally.
It should still be possible to use LBR without freeze for profile-guided optimization of user programs by using an user-only branch filter during profiling. When the user-only filter is enabled, branches are no longer recorded after the transition to CPL 0 upon PMI arrival. When branch entries are read in the PMI handler, the branch stack does not change.
E.g.
$ perf record -j any,u -e ex_ret_brn_tkn ./workload
--- arch/x86/events/amd/core.c | 4 ++-- arch/x86/events/amd/lbr.c | 16 ++++++++++------ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/kernel/cpu/scattered.c | 1 + 4 files changed, 14 insertions(+), 9 deletions(-)
arch/x86/events/amd/core.c +2 -2
@@ -905,8 +905,8 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)if (!status) goto done; -/* Read branch records before unfreezing */ -if (status &GLOBAL_STATUS_LBRS_FROZEN ) { +/* Read branch records */ +if (x86_pmu.lbr_nr) {amd_pmu_lbr_read (); status &= ~GLOBAL_STATUS_LBRS_FROZEN ; }
arch/x86/events/amd/lbr.c +10 -6
@@ -400,10 +400,12 @@ void amd_pmu_lbr_enable_all(void)wrmsrl (MSR_AMD64_LBR_SELECT , lbr_select); } -rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); -rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg); +if (cpu_feature_enabled (X86_FEATURE_AMD_LBR_PMC_FREEZE )) { +rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); +wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl |DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + } -wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl |DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); +rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg);wrmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg |DBG_EXTN_CFG_LBRV2EN ); }
@@ -416,10 +418,12 @@ void amd_pmu_lbr_disable_all(void)return ;rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg); -rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); -wrmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg & ~DBG_EXTN_CFG_LBRV2EN ); -wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl & ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + +if (cpu_feature_enabled (X86_FEATURE_AMD_LBR_PMC_FREEZE )) { +rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); +wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl & ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + } }__init int amd_pmu_lbr_init (void )
arch/x86/include/asm/cpufeatures.h +1 -1
@@ -97,7 +97,7 @@#define X86_FEATURE_SYSENTER32 ( 3*32+15)/* "" sysenter in IA32 userspace */ #define X86_FEATURE_REP_GOOD ( 3*32+16)/* REP microcode works well */ #define X86_FEATURE_AMD_LBR_V2 ( 3*32+17)/* AMD Last Branch Record Extension Version 2 */ -/* FREE, was #define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) "" LFENCE synchronizes RDTSC */ +#define X86_FEATURE_AMD_LBR_PMC_FREEZE ( 3*32+18)/* "" AMD LBR and PMC Freeze */ #define X86_FEATURE_ACC_POWER ( 3*32+19)/* AMD Accumulated Power Mechanism */ #define X86_FEATURE_NOPL ( 3*32+20)/* The NOPL (0F 1F) instructions */ #define X86_FEATURE_ALWAYS ( 3*32+21)/* "" Always-present feature */
arch/x86/kernel/cpu/scattered.c +1 -0
@@ -49,6 +49,7 @@ static const struct cpuid_bit cpuid_bits[] = { { X86_FEATURE_BMEC, CPUID_EBX, 3, 0x80000020, 0 }, { X86_FEATURE_PERFMON_V2, CPUID_EAX, 0, 0x80000022, 0 }, { X86_FEATURE_AMD_LBR_V2, CPUID_EAX, 1, 0x80000022, 0 }, + { X86_FEATURE_AMD_LBR_PMC_FREEZE, CPUID_EAX, 2, 0x80000022, 0 }, { 0, 0, 0, 0, 0 } };
Signature · 1 line
2.34.1
PATCH 2/3 perf/x86/amd/lbr: Discard erroneous branch entries
In reply to Sandipan DasThe Revision Guide for AMD Family 19h Model 10-1Fh processors, found at the link below, declares Erratum 1452 which states that non-branch entries may erroneously be recorded in the Last Branch Record (LBR) stack with the valid and spec bits set. Such entries can be recognized by inspecting bit 61 of the corresponding LastBranchStackToIp register. This bit is currently reserved but if found to be set, the associated branch entry should be discarded.
--- arch/x86/events/amd/lbr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/x86/events/amd/lbr.c +4 -2
@@ -173,9 +173,11 @@ void amd_pmu_lbr_read(void)/* * Check if a branch has been logged; if valid = 0, spec = 0 -* then no branch was recorded +* then no branch was recorded; if reserved = 1 then an +* erroneous branch was recorded (see erratum 1452) */ -if (!entry.to.split.valid && !entry.to.split.spec) +if ((!entry.to.split.valid && !entry.to.split.spec) || + entry.to.split.reserved)continue ;perf_clear_branch_entry_bitfields (br + out);
Signature · 1 line
2.34.1
PATCH 3/3 perf/x86/amd/core: Avoid register reset when CPU is dead
In reply to Sandipan DasWhen bringing a CPU online, some of the PMC and LBR related registers are reset. The same is done when a CPU is taken offline although that is unnecessary. This currently happens in the "cpu_dead" callback which is also incorrect as the callback runs on a control CPU instead of the one that is being taken offline. This also affects hibernation and suspend to RAM on some platforms as reported in the link below.
--- arch/x86/events/amd/core.c | 1 - 1 file changed, 1 deletion(-)
arch/x86/events/amd/core.c +0 -1
@@ -604,7 +604,6 @@ static void amd_pmu_cpu_dead(int cpu)kfree (cpuhw->lbr_sel); cpuhw->lbr_sel =NULL ; -amd_pmu_cpu_reset (cpu);if (!x86_pmu.amd_nb_constraints)return ;
Signature · 1 line
2.34.1
Re: [PATCH 1/3] perf/x86/amd/lbr: Use freeze based on availability
In reply to Sandipan DasQuoted 7 lines · Sandipan Das
Currently, it is assumed that LBR Freeze is supported on all processors which have CPUID leaf 0x80000022[EAX] bit 1 set. This is incorrect as the feature availability is additionally dependent on CPUID leaf 0x80000022[EAX] bit 2 being set which may not be set for all Zen 4 processors. Define a new feature bit for LBR and PMC freeze and set the freeze enable bit (FLBRI) in DebugCtl (MSR
0x1d9) conditionally.
Is this new feature bit visible to users?
I think it is useful to know whether or not LBR freeze is supported. Imagine I want to do kernel FDO, then the user-only LBR trick to freeze LBR does not work and I need actual LBR freeze support.
Thanks.
Quoted 99 lines
It should still be possible to use LBR without freeze for profile-guided optimization of user programs by using an user-only branch filter during profiling. When the user-only filter is enabled, branches are no longer recorded after the transition to CPL 0 upon PMI arrival. When branch entries are read in the PMI handler, the branch stack does not change.
E.g.
$ perf record -j any,u -e ex_ret_brn_tkn ./workloadFixes ca5b7c0d9621 ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")Signed-off-by Sandipan Das <[email protected]>--- arch/x86/events/amd/core.c | 4 ++-- arch/x86/events/amd/lbr.c | 16 ++++++++++------ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/kernel/cpu/scattered.c | 1 + 4 files changed, 14 insertions(+), 9 deletions(-)arch/x86/events/amd/core.c +2
-2@@ -905,8 +905,8 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)if (!status) goto done; -/* Read branch records before unfreezing */ -if (status &GLOBAL_STATUS_LBRS_FROZEN ) { +/* Read branch records */ +if (x86_pmu.lbr_nr) {amd_pmu_lbr_read (); status &= ~GLOBAL_STATUS_LBRS_FROZEN ; }arch/x86/events/amd/lbr.c +10
-6@@ -400,10 +400,12 @@ void amd_pmu_lbr_enable_all(void)wrmsrl (MSR_AMD64_LBR_SELECT , lbr_select); } -rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); -rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg); +if (cpu_feature_enabled (X86_FEATURE_AMD_LBR_PMC_FREEZE )) { +rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); +wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl |DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + } -wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl |DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); +rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg);wrmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg |DBG_EXTN_CFG_LBRV2EN ); }@@ -416,10 +418,12 @@ void amd_pmu_lbr_disable_all(void)return ;rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg); -rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); -wrmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg & ~DBG_EXTN_CFG_LBRV2EN ); -wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl & ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + +if (cpu_feature_enabled (X86_FEATURE_AMD_LBR_PMC_FREEZE )) { +rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); +wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl & ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + } }__init int amd_pmu_lbr_init (void )arch/x86/include/asm/cpufeatures.h +1
-1@@ -97,7 +97,7 @@#define X86_FEATURE_SYSENTER32 ( 3*32+15)/* "" sysenter in IA32 userspace */ #define X86_FEATURE_REP_GOOD ( 3*32+16)/* REP microcode works well */ #define X86_FEATURE_AMD_LBR_V2 ( 3*32+17)/* AMD Last Branch Record Extension Version 2 */ -/* FREE, was #define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) "" LFENCE synchronizes RDTSC */ +#define X86_FEATURE_AMD_LBR_PMC_FREEZE ( 3*32+18)/* "" AMD LBR and PMC Freeze */ #define X86_FEATURE_ACC_POWER ( 3*32+19)/* AMD Accumulated Power Mechanism */ #define X86_FEATURE_NOPL ( 3*32+20)/* The NOPL (0F 1F) instructions */ #define X86_FEATURE_ALWAYS ( 3*32+21)/* "" Always-present feature */ arch/x86/kernel/cpu/scattered.c +1
-1@@ -49,6 +49,7 @@ static const struct cpuid_bit cpuid_bits[] = { { X86_FEATURE_BMEC, CPUID_EBX, 3, 0x80000020, 0 }, { X86_FEATURE_PERFMON_V2, CPUID_EAX, 0, 0x80000022, 0 }, { X86_FEATURE_AMD_LBR_V2, CPUID_EAX, 1, 0x80000022, 0 }, + { X86_FEATURE_AMD_LBR_PMC_FREEZE, CPUID_EAX, 2, 0x80000022, 0 }, { 0, 0, 0, 0, 0 } }; --2.34.1
Re: [PATCH 1/3] perf/x86/amd/lbr: Use freeze based on availability
Quoted 10 lines · Stephane Eranian
Quoted 7 lines · Sandipan Das
Currently, it is assumed that LBR Freeze is supported on all processors which have CPUID leaf 0x80000022[EAX] bit 1 set. This is incorrect as the feature availability is additionally dependent on CPUID leaf 0x80000022[EAX] bit 2 being set which may not be set for all Zen 4 processors. Define a new feature bit for LBR and PMC freeze and set the freeze enable bit (FLBRI) in DebugCtl (MSR
0x1d9) conditionally.
Quoted 7 lines
Is this new feature bit visible to users?
I think it is useful to know whether or not LBR freeze is supported. Imagine I want to do kernel FDO, then the user-only LBR trick to freeze LBR does not work and I need actual LBR freeze support.Thanks.
Agreed. Will make it a visible flag in /proc/cpuinfo.
- Sandipan
Quoted 99 lines
Quoted 99 lines
It should still be possible to use LBR without freeze for profile-guided optimization of user programs by using an user-only branch filter during profiling. When the user-only filter is enabled, branches are no longer recorded after the transition to CPL 0 upon PMI arrival. When branch entries are read in the PMI handler, the branch stack does not change.
E.g.
$ perf record -j any,u -e ex_ret_brn_tkn ./workloadFixes ca5b7c0d9621 ("perf/x86/amd/lbr: Add LbrExtV2 branch record support")Signed-off-by Sandipan Das <[email protected]>--- arch/x86/events/amd/core.c | 4 ++-- arch/x86/events/amd/lbr.c | 16 ++++++++++------ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/kernel/cpu/scattered.c | 1 + 4 files changed, 14 insertions(+), 9 deletions(-)arch/x86/events/amd/core.c +2
-2@@ -905,8 +905,8 @@ static int amd_pmu_v2_handle_irq(struct pt_regs *regs)if (!status) goto done; -/* Read branch records before unfreezing */ -if (status &GLOBAL_STATUS_LBRS_FROZEN ) { +/* Read branch records */ +if (x86_pmu.lbr_nr) {amd_pmu_lbr_read (); status &= ~GLOBAL_STATUS_LBRS_FROZEN ; }arch/x86/events/amd/lbr.c +10
-6@@ -400,10 +400,12 @@ void amd_pmu_lbr_enable_all(void)wrmsrl (MSR_AMD64_LBR_SELECT , lbr_select); } -rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); -rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg); +if (cpu_feature_enabled (X86_FEATURE_AMD_LBR_PMC_FREEZE )) { +rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); +wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl |DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + } -wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl |DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); +rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg);wrmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg |DBG_EXTN_CFG_LBRV2EN ); }@@ -416,10 +418,12 @@ void amd_pmu_lbr_disable_all(void)return ;rdmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg); -rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); -wrmsrl (MSR_AMD_DBG_EXTN_CFG , dbg_extn_cfg & ~DBG_EXTN_CFG_LBRV2EN ); -wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl & ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + +if (cpu_feature_enabled (X86_FEATURE_AMD_LBR_PMC_FREEZE )) { +rdmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl); +wrmsrl (MSR_IA32_DEBUGCTLMSR , dbg_ctl & ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ); + } }__init int amd_pmu_lbr_init (void )arch/x86/include/asm/cpufeatures.h +1
-1@@ -97,7 +97,7 @@#define X86_FEATURE_SYSENTER32 ( 3*32+15)/* "" sysenter in IA32 userspace */ #define X86_FEATURE_REP_GOOD ( 3*32+16)/* REP microcode works well */ #define X86_FEATURE_AMD_LBR_V2 ( 3*32+17)/* AMD Last Branch Record Extension Version 2 */ -/* FREE, was #define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) "" LFENCE synchronizes RDTSC */ +#define X86_FEATURE_AMD_LBR_PMC_FREEZE ( 3*32+18)/* "" AMD LBR and PMC Freeze */ #define X86_FEATURE_ACC_POWER ( 3*32+19)/* AMD Accumulated Power Mechanism */ #define X86_FEATURE_NOPL ( 3*32+20)/* The NOPL (0F 1F) instructions */ #define X86_FEATURE_ALWAYS ( 3*32+21)/* "" Always-present feature */ arch/x86/kernel/cpu/scattered.c +1
-1@@ -49,6 +49,7 @@ static const struct cpuid_bit cpuid_bits[] = { { X86_FEATURE_BMEC, CPUID_EBX, 3, 0x80000020, 0 }, { X86_FEATURE_PERFMON_V2, CPUID_EAX, 0, 0x80000022, 0 }, { X86_FEATURE_AMD_LBR_V2, CPUID_EAX, 1, 0x80000022, 0 }, + { X86_FEATURE_AMD_LBR_PMC_FREEZE, CPUID_EAX, 2, 0x80000022, 0 }, { 0, 0, 0, 0, 0 } }; --2.34.1