Skip to contentSkip to conversation

Updates to mlxbf-pmc

PATCH In review Shravan Kumar Ramani 2 participants 7 messages Apr 17, 2024 – Apr 18, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Updates to mlxbf-pmc

This submission contains 3 patches relating to mlxbf-pmc.

Patch 1 adds documentation for the sysfs files created by the driver. Patches 2 and 3 add specific functionality to the driver for supporting 64-bit ocunters, cycle count and clock_measure performance block.

Shravan Kumar Ramani (3):
Documentation/ABI: Add document for Mellanox PMC driver platform/mellanox: mlxbf-pmc: Add support for 64-bit counters and
cycle count
platform/mellanox: mlxbf-pmc: Add support for clock_measure
performance block

 .../ABI/testing/sysfs-platform-mellanox-pmc   |  49 +++++
 drivers/platform/mellanox/mlxbf-pmc.c         | 180 +++++++++++++++++-
 2 files changed, 225 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-platform-mellanox-pmc
Signature · 1 line
2.30.1
#1 lore raw

PATCH 1/3 Documentation/ABI: Add document for Mellanox PMC driver

The sysfs interface is created for programming and monitoring the performance counters in various HW blocks of Mellanox BlueField-1, BlueField-2 and BlueField-3.

---
 .../ABI/testing/sysfs-platform-mellanox-pmc   | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-platform-mellanox-pmc
Documentation/ABI/testing/sysfs-platform-mellanox-pmc new file +49 -0
new file mode 100644
index 000000000000..47094024dbeb
@@ -0,0 +1,49 @@
+HID           Driver         Description
+MLNXBFD0      mlxbf-pmc      Performance counters (BlueField-1)
+MLNXBFD1      mlxbf-pmc      Performance counters (BlueField-2)
+MLNXBFD2      mlxbf-pmc      Performance counters (BlueField-3)
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event_list
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		List of events supported by the counters in the specific block.
+		It is used to extract the event number or ID associated with
+		each event.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event<N>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Event monitored by corresponding counter. This is used to
+		program or read back the event that should be or is currently
+		being monitored by counter<N>.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/counter<N>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Counter value of the event being monitored. This is used to
+		read the counter value of the event which was programmed using
+		event<N>. This is also used to clear or reset the counter value.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/enable
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Start or stop counters. This is used to start the counters
+		for monitoring the programmed events and also to stop the
+		counters after the desired duration.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/<reg>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Value of register. This is used to read or reset the registers
+		where various performance statistics are counted for each block.
+
Signature · 1 line
2.30.1
#6 lore raw

PATCH 3/3 platform/mellanox: mlxbf-pmc: Add support for clock_measure performance block

In reply to Shravan Kumar Ramani

The HW clock_measure counter info is passed to the driver from ACPI. Create a new sub-directory for clock_measure events and provide read access to the user. Writes are blocked since the fields are RO.

---
 drivers/platform/mellanox/mlxbf-pmc.c | 46 ++++++++++++++++++++++++---
 1 file changed, 42 insertions(+), 4 deletions(-)
drivers/platform/mellanox/mlxbf-pmc.c +42 -4
index 635ecc3b3845..1212a96fb3eb 100644
@@ -865,6 +865,37 @@ static const struct mlxbf_pmc_events mlxbf_pmc_llt_miss_events[] = {
 	{75, "HISTOGRAM_HISTOGRAM_BIN9"},
 };
 
+static const struct mlxbf_pmc_events mlxbf_pmc_clock_events[] = {
+	{ 0x0, "FMON_CLK_LAST_COUNT_PLL_D1_INST0" },
+	{ 0x4, "REFERENCE_WINDOW_WIDTH_PLL_D1_INST0" },
+	{ 0x8, "FMON_CLK_LAST_COUNT_PLL_D1_INST1" },
+	{ 0xc, "REFERENCE_WINDOW_WIDTH_PLL_D1_INST1" },
+	{ 0x10, "FMON_CLK_LAST_COUNT_PLL_G1" },
+	{ 0x14, "REFERENCE_WINDOW_WIDTH_PLL_G1" },
+	{ 0x18, "FMON_CLK_LAST_COUNT_PLL_W1" },
+	{ 0x1c, "REFERENCE_WINDOW_WIDTH_PLL_W1" },
+	{ 0x20, "FMON_CLK_LAST_COUNT_PLL_T1" },
+	{ 0x24, "REFERENCE_WINDOW_WIDTH_PLL_T1" },
+	{ 0x28, "FMON_CLK_LAST_COUNT_PLL_A0" },
+	{ 0x2c, "REFERENCE_WINDOW_WIDTH_PLL_A0" },
+	{ 0x30, "FMON_CLK_LAST_COUNT_PLL_C0" },
+	{ 0x34, "REFERENCE_WINDOW_WIDTH_PLL_C0" },
+	{ 0x38, "FMON_CLK_LAST_COUNT_PLL_N1" },
+	{ 0x3c, "REFERENCE_WINDOW_WIDTH_PLL_N1" },
+	{ 0x40, "FMON_CLK_LAST_COUNT_PLL_I1" },
+	{ 0x44, "REFERENCE_WINDOW_WIDTH_PLL_I1" },
+	{ 0x48, "FMON_CLK_LAST_COUNT_PLL_R1" },
+	{ 0x4c, "REFERENCE_WINDOW_WIDTH_PLL_R1" },
+	{ 0x50, "FMON_CLK_LAST_COUNT_PLL_P1" },
+	{ 0x54, "REFERENCE_WINDOW_WIDTH_PLL_P1" },
+	{ 0x58, "FMON_CLK_LAST_COUNT_REF_100_INST0" },
+	{ 0x5c, "REFERENCE_WINDOW_WIDTH_REF_100_INST0" },
+	{ 0x60, "FMON_CLK_LAST_COUNT_REF_100_INST1" },
+	{ 0x64, "REFERENCE_WINDOW_WIDTH_REF_100_INST1" },
+	{ 0x68, "FMON_CLK_LAST_COUNT_REF_156" },
+	{ 0x6c, "REFERENCE_WINDOW_WIDTH_REF_156" },
+};
+
 static struct mlxbf_pmc_context *pmc;
 
 /* UUID used to probe ATF service. */
@@ -1038,6 +1069,9 @@ static const struct mlxbf_pmc_events *mlxbf_pmc_event_list(const char *blk, size
 	} else if (strstr(blk, "llt")) {
 		events = mlxbf_pmc_llt_events;
 		size = ARRAY_SIZE(mlxbf_pmc_llt_events);
+	} else if (strstr(blk, "clock_measure")) {
+		events = mlxbf_pmc_clock_events;
+		size = ARRAY_SIZE(mlxbf_pmc_clock_events);
 	} else {
 		events = NULL;
 		size = 0;
@@ -1472,14 +1506,15 @@ static int mlxbf_pmc_read_event(unsigned int blk_num, u32 cnt_num, bool is_l3, u
 /* Method to read a register */
 static int mlxbf_pmc_read_reg(unsigned int blk_num, u32 offset, u64 *result)
 {
-	u32 ecc_out;
+	u32 reg;
 
-	if (strstr(pmc->block_name[blk_num], "ecc")) {
+	if ((strstr(pmc->block_name[blk_num], "ecc")) ||
+	    (strstr(pmc->block_name[blk_num], "clock_measure"))) {
 		if (mlxbf_pmc_readl(pmc->block[blk_num].mmio_base + offset,
-				    &ecc_out))
+				    &reg))
 			return -EFAULT;
 
-		*result = ecc_out;
+		*result = reg;
 		return 0;
 	}
 
@@ -1493,6 +1528,9 @@ static int mlxbf_pmc_read_reg(unsigned int blk_num, u32 offset, u64 *result)
 /* Method to write to a register */
 static int mlxbf_pmc_write_reg(unsigned int blk_num, u32 offset, u64 data)
 {
+	if (strstr(pmc->block_name[blk_num], "clock_measure"))
+		return -EINVAL;
+
 	if (strstr(pmc->block_name[blk_num], "ecc")) {
 		return mlxbf_pmc_write(pmc->block[blk_num].mmio_base + offset,
 				       MLXBF_PMC_WRITE_REG_32, data);
Signature · 1 line
2.30.1
#3 lore raw

PATCH 2/3 platform/mellanox: mlxbf-pmc: Add support for 64-bit counters and cycle count

In reply to Shravan Kumar Ramani

Add support for programming any counter to monitor the cycle count. Since counting of cycles using 32-bit ocunters would result in frequent wraparounds, add the ability to combine 2 adjacent 32-bit counters to form 1 64-bit counter.
Both these features are supported by BlueField-3 PMC hardware, hence the required bit-fields are exposed by the driver via sysfs to allow the user to configure as needed.

---
 drivers/platform/mellanox/mlxbf-pmc.c | 134 ++++++++++++++++++++++++++
 1 file changed, 134 insertions(+)
drivers/platform/mellanox/mlxbf-pmc.c +134 -0
index 4ed9c7fd2b62..635ecc3b3845 100644
@@ -88,6 +88,8 @@
 #define MLXBF_PMC_CRSPACE_PERFMON_CTL(n) (n * MLXBF_PMC_CRSPACE_PERFMON_REG0_SZ)
 #define MLXBF_PMC_CRSPACE_PERFMON_EN BIT(30)
 #define MLXBF_PMC_CRSPACE_PERFMON_CLR BIT(28)
+#define MLXBF_PMC_CRSPACE_PERFMON_UOC GENMASK(15, 0)
+#define MLXBF_PMC_CRSPACE_PERFMON_COUNT_CLOCK(n) (MLXBF_PMC_CRSPACE_PERFMON_CTL(n) + 0x4)
 #define MLXBF_PMC_CRSPACE_PERFMON_VAL0(n) (MLXBF_PMC_CRSPACE_PERFMON_CTL(n) + 0xc)
 
 /**
@@ -114,6 +116,8 @@ struct mlxbf_pmc_attribute {
  * @attr_event: Attributes for "event" sysfs files
  * @attr_event_list: Attributes for "event_list" sysfs files
  * @attr_enable: Attributes for "enable" sysfs files
+ * @attr_use_odd_counter: Attributes for "use_odd_counter" sysfs files
+ * @attr_count_clock: Attributes for "count_clock" sysfs files
  * @block_attr: All attributes needed for the block
  * @block_attr_grp: Attribute group for the block
  */
@@ -126,6 +130,8 @@ struct mlxbf_pmc_block_info {
 	struct mlxbf_pmc_attribute *attr_event;
 	struct mlxbf_pmc_attribute attr_event_list;
 	struct mlxbf_pmc_attribute attr_enable;
+	struct mlxbf_pmc_attribute attr_use_odd_counter;
+	struct mlxbf_pmc_attribute attr_count_clock;
 	struct attribute *block_attr[MLXBF_PMC_MAX_ATTRS];
 	struct attribute_group block_attr_grp;
 };
@@ -1763,6 +1769,103 @@ static ssize_t mlxbf_pmc_enable_store(struct device *dev,
 	return count;
 }
 
+/* Show function for "use_odd_counter" sysfs files - only for crspace */
+static ssize_t mlxbf_pmc_use_odd_counter_show(struct device *dev,
+					      struct device_attribute *attr, char *buf)
+{
+	struct mlxbf_pmc_attribute *attr_use_odd_counter = container_of(
+		attr, struct mlxbf_pmc_attribute, dev_attr);
+	unsigned int blk_num;
+	u32 value, reg;
+
+	blk_num = attr_use_odd_counter->nr;
+
+	if (mlxbf_pmc_readl(pmc->block[blk_num].mmio_base +
+			MLXBF_PMC_CRSPACE_PERFMON_CTL(pmc->block[blk_num].counters),
+			&reg))
+		return -EINVAL;
+
+	value = FIELD_GET(MLXBF_PMC_CRSPACE_PERFMON_UOC, reg);
+
+	return sysfs_emit(buf, "%u\n", value);
+}
+
+/* Store function for "use_odd_counter" sysfs files - only for crspace */
+static ssize_t mlxbf_pmc_use_odd_counter_store(struct device *dev,
+					       struct device_attribute *attr,
+					       const char *buf, size_t count)
+{
+	struct mlxbf_pmc_attribute *attr_use_odd_counter = container_of(
+		attr, struct mlxbf_pmc_attribute, dev_attr);
+	unsigned int blk_num;
+	u32 uoc, reg;
+	int err;
+
+	blk_num = attr_use_odd_counter->nr;
+
+	err = kstrtouint(buf, 0, &uoc);
+	if (err < 0)
+		return err;
+
+	err = mlxbf_pmc_readl(pmc->block[blk_num].mmio_base +
+		MLXBF_PMC_CRSPACE_PERFMON_CTL(pmc->block[blk_num].counters),
+		&reg);
+	if (err)
+		return -EINVAL;
+
+	reg &= ~MLXBF_PMC_CRSPACE_PERFMON_UOC;
+	reg |= FIELD_PREP(MLXBF_PMC_CRSPACE_PERFMON_UOC, uoc);
+
+	mlxbf_pmc_write(pmc->block[blk_num].mmio_base +
+		MLXBF_PMC_CRSPACE_PERFMON_CTL(pmc->block[blk_num].counters),
+		MLXBF_PMC_WRITE_REG_32, reg);
+
+	return count;
+}
+
+/* Show function for "count_clock" sysfs files - only for crspace */
+static ssize_t mlxbf_pmc_count_clock_show(struct device *dev,
+					  struct device_attribute *attr, char *buf)
+{
+	struct mlxbf_pmc_attribute *attr_count_clock = container_of(
+		attr, struct mlxbf_pmc_attribute, dev_attr);
+	unsigned int blk_num;
+	u32 reg;
+
+	blk_num = attr_count_clock->nr;
+
+	if (mlxbf_pmc_readl(pmc->block[blk_num].mmio_base +
+			MLXBF_PMC_CRSPACE_PERFMON_COUNT_CLOCK(pmc->block[blk_num].counters),
+			&reg))
+		return -EINVAL;
+
+	return sysfs_emit(buf, "%u\n", reg);
+}
+
+/* Store function for "count_clock" sysfs files - only for crspace */
+static ssize_t mlxbf_pmc_count_clock_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t count)
+{
+	struct mlxbf_pmc_attribute *attr_count_clock = container_of(
+		attr, struct mlxbf_pmc_attribute, dev_attr);
+	unsigned int blk_num;
+	u32 reg;
+	int err;
+
+	blk_num = attr_count_clock->nr;
+
+	err = kstrtouint(buf, 0, &reg);
+	if (err < 0)
+		return err;
+
+	mlxbf_pmc_write(pmc->block[blk_num].mmio_base +
+		MLXBF_PMC_CRSPACE_PERFMON_COUNT_CLOCK(pmc->block[blk_num].counters),
+		MLXBF_PMC_WRITE_REG_32, reg);
+
+	return count;
+}
+
 /* Populate attributes for blocks with counters to monitor performance */
 static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_num)
 {
@@ -1799,6 +1902,37 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
 		attr = NULL;
 	}
 
+	if (pmc->block[blk_num].type == MLXBF_PMC_TYPE_CRSPACE) {
+		/*
+		 * Couple adjacent odd and even 32-bit counters to form 64-bit counters
+		 * using "use_odd_counter" sysfs which has one bit per even counter.
+		 */
+		attr = &pmc->block[blk_num].attr_use_odd_counter;
+		attr->dev_attr.attr.mode = 0644;
+		attr->dev_attr.show = mlxbf_pmc_use_odd_counter_show;
+		attr->dev_attr.store = mlxbf_pmc_use_odd_counter_store;
+		attr->nr = blk_num;
+		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							  "use_odd_counter");
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
+		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
+		attr = NULL;
+
+		/* Program crspace counters to count clock cycles using "count_clock" sysfs */
+		attr = &pmc->block[blk_num].attr_count_clock;
+		attr->dev_attr.attr.mode = 0644;
+		attr->dev_attr.show = mlxbf_pmc_count_clock_show;
+		attr->dev_attr.store = mlxbf_pmc_count_clock_store;
+		attr->nr = blk_num;
+		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							  "count_clock");
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
+		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
+		attr = NULL;
+	}
+
 	pmc->block[blk_num].attr_counter = devm_kcalloc(
 		dev, pmc->block[blk_num].counters,
 		sizeof(struct mlxbf_pmc_attribute), GFP_KERNEL);
Signature · 1 line
2.30.1
maintainer
#2 lore raw

Re: [PATCH v1 1/3] Documentation/ABI: Add document for Mellanox PMC driver

In reply to Shravan Kumar Ramani
Quoted 7 lines · Shravan Kumar Ramani

The sysfs interface is created for programming and monitoring the performance counters in various HW blocks of Mellanox BlueField-1, BlueField-2 and BlueField-3.

---

This documents the existing sysfs files? Which is good, thank you!

However, there's still no PATCH 4/ which would document the new interface added by this series, namely use_odd_counter and count_clock, am I correct?

Signature · 1 line
 i.
Quoted 60 lines
 .../ABI/testing/sysfs-platform-mellanox-pmc   | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-platform-mellanox-pmc
Documentation/ABI/testing/sysfs-platform-mellanox-pmc new file +49 -0
new file mode 100644
index 000000000000..47094024dbeb
@@ -0,0 +1,49 @@
+HID           Driver         Description
+MLNXBFD0      mlxbf-pmc      Performance counters (BlueField-1)
+MLNXBFD1      mlxbf-pmc      Performance counters (BlueField-2)
+MLNXBFD2      mlxbf-pmc      Performance counters (BlueField-3)
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event_list
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		List of events supported by the counters in the specific block.
+		It is used to extract the event number or ID associated with
+		each event.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/event<N>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Event monitored by corresponding counter. This is used to
+		program or read back the event that should be or is currently
+		being monitored by counter<N>.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/counter<N>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Counter value of the event being monitored. This is used to
+		read the counter value of the event which was programmed using
+		event<N>. This is also used to clear or reset the counter value.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/enable
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Start or stop counters. This is used to start the counters
+		for monitoring the programmed events and also to stop the
+		counters after the desired duration.
+
+What:		/sys/bus/platform/devices/<HID>/hwmon/hwmonX/<block>/<reg>
+Date:		Dec 2020
+KernelVersion:	5.10
+Contact:	"Shravan Kumar Ramani <[email protected]>"
+Description:
+		Value of register. This is used to read or reset the registers
+		where various performance statistics are counted for each block.
+
maintainer
#4 lore raw

Re: [PATCH v1 2/3] platform/mellanox: mlxbf-pmc: Add support for 64-bit counters and cycle count

In reply to Shravan Kumar Ramani
Quoted 37 lines · Shravan Kumar Ramani

Add support for programming any counter to monitor the cycle count. Since counting of cycles using 32-bit ocunters would result in frequent wraparounds, add the ability to combine 2 adjacent 32-bit counters to form 1 64-bit counter.
Both these features are supported by BlueField-3 PMC hardware, hence the required bit-fields are exposed by the driver via sysfs to allow the user to configure as needed.

---

drivers/platform/mellanox/mlxbf-pmc.c +20 -0
@@ -1799,6 +1902,37 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
 		attr = NULL;
 	}
 
+	if (pmc->block[blk_num].type == MLXBF_PMC_TYPE_CRSPACE) {
+		/*
+		 * Couple adjacent odd and even 32-bit counters to form 64-bit counters
+		 * using "use_odd_counter" sysfs which has one bit per even counter.
+		 */
+		attr = &pmc->block[blk_num].attr_use_odd_counter;
+		attr->dev_attr.attr.mode = 0644;
+		attr->dev_attr.show = mlxbf_pmc_use_odd_counter_show;
+		attr->dev_attr.store = mlxbf_pmc_use_odd_counter_store;
+		attr->nr = blk_num;
+		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							  "use_odd_counter");
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
+		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
+		attr = NULL;
+
+		/* Program crspace counters to count clock cycles using "count_clock" sysfs */
+		attr = &pmc->block[blk_num].attr_count_clock;
+		attr->dev_attr.attr.mode = 0644;

drivers/platform/mellanox/mlxbf-pmc.c static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_ · line 1934

Quoted 10 lines
drivers/platform/mellanox/mlxbf-pmc.c +10 -0
+		attr->dev_attr.show = mlxbf_pmc_count_clock_show;
+		attr->dev_attr.store = mlxbf_pmc_count_clock_store;
+		attr->nr = blk_num;
+		attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+							  "count_clock");
+		if (!attr->dev_attr.attr.name)
+			return -ENOMEM;
+		pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
+		attr = NULL;
+	}

Hi,

What was the reason why this driver could not use .dev_groups to setup sysfs (filtering can be done with .is_visible)?

Signature · 1 line
 i.
#5 lore raw

Re: [PATCH v1 2/3] platform/mellanox: mlxbf-pmc: Add support for 64-bit counters and cycle count

Quoted 52 lines · Shravan Kumar Ramani
Quoted 40 lines

Add support for programming any counter to monitor the cycle count. Since counting of cycles using 32-bit ocunters would result in frequent wraparounds, add the ability to combine 2 adjacent 32-bit counters to form 1 64-bit counter.
Both these features are supported by BlueField-3 PMC hardware, hence the required bit-fields are exposed by the driver via sysfs to allow the user to configure as needed.

---

drivers/platform/mellanox/mlxbf-pmc.c +0 -0
@@ -1799,6 +1902,37 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
                 attr = NULL;
         }


+     if (pmc->block[blk_num].type == MLXBF_PMC_TYPE_CRSPACE) {
+             /*
+              * Couple adjacent odd and even 32-bit counters to form 64-bit counters +              * using "use_odd_counter" sysfs which has one bit per even counter. +              */
+             attr = &pmc->block[blk_num].attr_use_odd_counter;
+             attr->dev_attr.attr.mode = 0644;
+             attr->dev_attr.show = mlxbf_pmc_use_odd_counter_show;
+             attr->dev_attr.store = mlxbf_pmc_use_odd_counter_store;
+             attr->nr = blk_num;
+             attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL,
+                                                       "use_odd_counter");
+             if (!attr->dev_attr.attr.name)
+                     return -ENOMEM;
+             pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr;
+             attr = NULL;
+
+             /* Program crspace counters to count clock cycles using "count_clock" sysfs */ +             attr = &pmc->block[blk_num].attr_count_clock;
+             attr->dev_attr.attr.mode = 0644;
+             attr->dev_attr.show = mlxbf_pmc_count_clock_show;
+             attr->dev_attr.store = mlxbf_pmc_count_clock_store;

Quoted 8 lines

+             attr->nr = blk_num;
+             attr->dev_attr.attr.name = devm_kasprintf(dev, GFP_KERNEL, +                                                       "count_clock"); +             if (!attr->dev_attr.attr.name)
+                     return -ENOMEM;
+             pmc->block[blk_num].block_attr[++i] = &attr->dev_attr.attr; +             attr = NULL;
+     }

Hi,

Quoted 3 lines

What was the reason why this driver could not use .dev_groups to setup sysfs (filtering can be done with .is_visible)?

The current approach was suggested during the initial submission of the driver and the same has been followed since. Do you mean to add a is_visible routine for each of the sysfs types like count_clock, use_odd_counter, etc and check the conditions for their inclusion in this routine?

Thanks,
Shravan