Skip to contentSkip to conversation

Add reset support to EN7581 clk driver

PATCH Superseded Lorenzo Bianconi 2 participants 8 messages May 17, 2024 – May 20, 2024

Subsystems (4)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add reset support to EN7581 clk driver

Introduce reset-controller support to the Airoha EN7581 clock module.

Changes since v1:
- squash patch 1/5 and 2/5
- introduce reset line mapping in order to take into account possible holes in reset definitions
- fix error path in en7523_clk_probe()

Lorenzo Bianconi (4):
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
arm64: dts: airoha: Add reset-controller support to EN7581 clock node
clk: en7523: Add reset-controller support for EN7581 SoC
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC

 .../bindings/clock/airoha,en7523-scu.yaml     |  21 ++
 arch/arm64/boot/dts/airoha/en7581.dtsi        |   2 +
 drivers/clk/clk-en7523.c                      | 230 ++++++++++++++----
 .../dt-bindings/reset/airoha,en7581-reset.h   |  66 +++++
 4 files changed, 278 insertions(+), 41 deletions(-)
 create mode 100644 include/dt-bindings/reset/airoha,en7581-reset.h
Signature · 1 line
2.45.0
#1 lore raw

PATCH v2 1/4 dt-bindings: clock: airoha: Add reset support to EN7581 clock binding

Introduce reset capability to EN7581 device-tree clock binding documentation.

---
 .../bindings/clock/airoha,en7523-scu.yaml     | 21 ++++++
 .../dt-bindings/reset/airoha,en7581-reset.h   | 66 +++++++++++++++++++
 2 files changed, 87 insertions(+)
 create mode 100644 include/dt-bindings/reset/airoha,en7581-reset.h
Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml +21 -0
index 3f4266637733..22eee1ae90d5 100644
@@ -43,6 +43,10 @@ properties:
       clocks.
     const: 1
 
+  '#reset-cells':
+    description: ID of the controller reset line
+    const: 1
+
 required:
   - compatible
   - reg
@@ -60,6 +64,8 @@ allOf:
             - description: scu base address
             - description: misc scu base address
 
+        '#reset-cells': false
+
   - if:
       properties:
         compatible:
@@ -83,3 +89,18 @@ examples:
             <0x1fb00000 0x1000>;
       #clock-cells = <1>;
     };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      scuclk: clock-controller@1fa20000 {
+        compatible = "airoha,en7581-scu";
+        reg = <0x0 0x1fa20000 0x0 0x400>,
+              <0x0 0x1fb00000 0x0 0x1000>,
+              <0x0 0x1fbe3400 0x0 0xfc>;
+              #clock-cells = <1>;
+              #reset-cells = <1>;
+      };
+    };
include/dt-bindings/reset/airoha,en7581-reset.h new file +66 -0

66 lines not on this page · raw message

Signature · 1 line
2.45.0
maintainer Reviewed-by on v2 1/4
#2 lore raw

Re: [PATCH v2 1/4] dt-bindings: clock: airoha: Add reset support to EN7581 clock binding

Il 17/05/24 14:28, Lorenzo Bianconi ha scritto:

Quoted 6 lines

Introduce reset capability to EN7581 device-tree clock binding documentation.

#3 lore raw

PATCH v2 2/4 arm64: dts: airoha: Add reset-controller support to EN7581 clock node

In reply to Lorenzo Bianconi

Introduce reset capability to scuclk clock-controller device-tree node for EN7581 SoC.

---
 arch/arm64/boot/dts/airoha/en7581.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/airoha/en7581.dtsi +2 -0
index 95a9ec534cdf..ca9fb0888ff9 100644
@@ -3,6 +3,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,en7581-reset.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -158,6 +159,7 @@ scuclk: clock-controller@1fa20000 {
 			      <0x0 0x1fb00000 0x0 0x1000>,
 			      <0x0 0x1fbe3400 0x0 0xfc>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		snfi: spi@1fa10000 {
Signature · 1 line
2.45.0
#5 lore raw

PATCH v2 3/4 clk: en7523: Add reset-controller support for EN7581 SoC

In reply to Lorenzo Bianconi

Introduce reset API support to EN7581 clock driver.

---
 drivers/clk/clk-en7523.c | 189 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 187 insertions(+), 2 deletions(-)
drivers/clk/clk-en7523.c +187 -2
index 381605be333f..20edfb2c43c7 100644
@@ -6,7 +6,11 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/reset-controller.h>
 #include <dt-bindings/clock/en7523-clk.h>
+#include <dt-bindings/reset/airoha,en7581-reset.h>
+
+#define RST_NR_PER_BANK			32
 
 #define REG_PCI_CONTROL			0x88
 #define   REG_PCI_CONTROL_PERSTOUT	BIT(29)
@@ -65,8 +69,20 @@ struct en_clk_gate {
 	struct clk_hw hw;
 };
 
+struct en_rst_data {
+	const u16 *bank_ofs;
+	const u16 *idx_map;
+	void __iomem *base;
+	struct reset_controller_dev rcdev;
+};
+
 struct en_clk_soc_data {
 	const struct clk_ops pcie_ops;
+	struct {
+		const u16 *bank_ofs;
+		const u16 *idx_map;
+		u16 idx_map_nr;
+	} reset;
 	int (*hw_init)(struct platform_device *pdev, void __iomem *base,
 		       void __iomem *np_base);
 };
@@ -169,6 +185,69 @@ static const struct en_clk_desc en7523_base_clks[] = {
 	}
 };
 
+static const u16 en7581_rst_ofs[] = {
+	REG_RESET_CONTROL2,
+	REG_RESET_CONTROL1,
+};
+
+static const u16 en7581_rst_map[] = {
+	/* RST_CTRL2 */
+	[EN7581_XPON_PHY_RST]		= 0,
+	[EN7581_CPU_TIMER2_RST]		= 2,
+	[EN7581_HSUART_RST]		= 3,
+	[EN7581_UART4_RST]		= 4,
+	[EN7581_UART5_RST]		= 5,
+	[EN7581_I2C2_RST]		= 6,
+	[EN7581_XSI_MAC_RST]		= 7,
+	[EN7581_XSI_PHY_RST]		= 8,
+	[EN7581_NPU_RST]		= 9,
+	[EN7581_I2S_RST]		= 10,
+	[EN7581_TRNG_RST]		= 11,
+	[EN7581_TRNG_MSTART_RST]	= 12,
+	[EN7581_DUAL_HSI0_RST]		= 13,
+	[EN7581_DUAL_HSI1_RST]		= 14,
+	[EN7581_HSI_RST]		= 15,
+	[EN7581_DUAL_HSI0_MAC_RST]	= 16,
+	[EN7581_DUAL_HSI1_MAC_RST]	= 17,
+	[EN7581_HSI_MAC_RST]		= 18,
+	[EN7581_WDMA_RST]		= 19,
+	[EN7581_WOE0_RST]		= 20,
+	[EN7581_WOE1_RST]		= 21,
+	[EN7581_HSDMA_RST]		= 22,
+	[EN7581_TDMA_RST]		= 24,
+	[EN7581_EMMC_RST]		= 25,
+	[EN7581_SOE_RST]		= 26,
+	[EN7581_PCIE2_RST]		= 27,
+	[EN7581_XFP_MAC_RST]		= 28,
+	[EN7581_USB_HOST_P1_RST]	= 29,
+	[EN7581_USB_HOST_P1_U3_PHY_RST]	= 30,
+	/* RST_CTRL1 */
+	[EN7581_PCM1_ZSI_ISI_RST]	= RST_NR_PER_BANK + 0,
+	[EN7581_FE_PDMA_RST]		= RST_NR_PER_BANK + 1,
+	[EN7581_FE_QDMA_RST]		= RST_NR_PER_BANK + 2,
+	[EN7581_PCM_SPIWP_RST]		= RST_NR_PER_BANK + 4,
+	[EN7581_CRYPTO_RST]		= RST_NR_PER_BANK + 6,
+	[EN7581_TIMER_RST]		= RST_NR_PER_BANK + 8,
+	[EN7581_PCM1_RST]		= RST_NR_PER_BANK + 11,
+	[EN7581_UART_RST]		= RST_NR_PER_BANK + 12,
+	[EN7581_GPIO_RST]		= RST_NR_PER_BANK + 13,
+	[EN7581_GDMA_RST]		= RST_NR_PER_BANK + 14,
+	[EN7581_I2C_MASTER_RST]		= RST_NR_PER_BANK + 16,
+	[EN7581_PCM2_ZSI_ISI_RST]	= RST_NR_PER_BANK + 17,
+	[EN7581_SFC_RST]		= RST_NR_PER_BANK + 18,
+	[EN7581_UART2_RST]		= RST_NR_PER_BANK + 19,
+	[EN7581_GDMP_RST]		= RST_NR_PER_BANK + 20,
+	[EN7581_FE_RST]			= RST_NR_PER_BANK + 21,
+	[EN7581_USB_HOST_P0_RST]	= RST_NR_PER_BANK + 22,
+	[EN7581_GSW_RST]		= RST_NR_PER_BANK + 23,
+	[EN7581_SFC2_PCM_RST]		= RST_NR_PER_BANK + 25,
+	[EN7581_PCIE0_RST]		= RST_NR_PER_BANK + 26,
+	[EN7581_PCIE1_RST]		= RST_NR_PER_BANK + 27,
+	[EN7581_CPU_TIMER_RST]		= RST_NR_PER_BANK + 28,
+	[EN7581_PCIE_HB_RST]		= RST_NR_PER_BANK + 29,
+	[EN7581_XPON_MAC_RST]		= RST_NR_PER_BANK + 31,
+};
+
 static unsigned int en7523_get_base_rate(void __iomem *base, unsigned int i)
 {
 	const struct en_clk_desc *desc = &en7523_base_clks[i];
@@ -424,6 +503,96 @@ static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 	clk_data->num = EN7523_NUM_CLOCKS;
 }
 
+static int en7523_reset_update(struct reset_controller_dev *rcdev,
+			       unsigned long id, bool assert)
+{
+	struct en_rst_data *rst_data;
+	void __iomem *addr;
+	u32 val;
+
+	rst_data = container_of(rcdev, struct en_rst_data, rcdev);
+	addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
+
+	val = readl(addr);
+	if (assert)
+		val |= BIT(id % RST_NR_PER_BANK);
+	else
+		val &= ~BIT(id % RST_NR_PER_BANK);
+	writel(val, addr);
+
+	return 0;
+}
+
+static int en7523_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return en7523_reset_update(rcdev, id, true);
+}
+
+static int en7523_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return en7523_reset_update(rcdev, id, false);
+}
+
+static int en7523_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct en_rst_data *rst_data;
+	void __iomem *addr;
+
+	rst_data = container_of(rcdev, struct en_rst_data, rcdev);
+	addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
+
+	return !!(readl(addr) & BIT(id % RST_NR_PER_BANK));
+}
+
+static int en7523_reset_xlate(struct reset_controller_dev *rcdev,
+			      const struct of_phandle_args *reset_spec)
+{
+	struct en_rst_data *rst_data;
+
+	rst_data = container_of(rcdev, struct en_rst_data, rcdev);
+	if (reset_spec->args[0] >= rcdev->nr_resets)
+		return -EINVAL;
+
+	return rst_data->idx_map[reset_spec->args[0]];
+}
+
+static const struct reset_control_ops en7523_reset_ops = {
+	.assert = en7523_reset_assert,
+	.deassert = en7523_reset_deassert,
+	.status = en7523_reset_status,
+};
+
+static int en7523_reset_register(struct device *dev, void __iomem *base,
+				 const struct en_clk_soc_data *soc_data)
+{
+	struct en_rst_data *rst_data;
+
+	/* no reset lines available */
+	if (!soc_data->reset.idx_map_nr)
+		return 0;
+
+	rst_data = devm_kzalloc(dev, sizeof(*rst_data), GFP_KERNEL);
+	if (!rst_data)
+		return -ENOMEM;
+
+	rst_data->bank_ofs = soc_data->reset.bank_ofs;
+	rst_data->idx_map = soc_data->reset.idx_map;
+	rst_data->base = base;
+
+	rst_data->rcdev.nr_resets = soc_data->reset.idx_map_nr;
+	rst_data->rcdev.of_xlate = en7523_reset_xlate;
+	rst_data->rcdev.ops = &en7523_reset_ops;
+	rst_data->rcdev.of_node = dev->of_node;
+	rst_data->rcdev.of_reset_n_cells = 1;
+	rst_data->rcdev.owner = THIS_MODULE;
+	rst_data->rcdev.dev = dev;
+
+	return devm_reset_controller_register(dev, &rst_data->rcdev);
+}
+
 static int en7523_clk_probe(struct platform_device *pdev)
 {
 	struct device_node *node = pdev->dev.of_node;
@@ -456,12 +625,23 @@ static int en7523_clk_probe(struct platform_device *pdev)
 	en7523_register_clocks(&pdev->dev, clk_data, base, np_base);
 
 	r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-	if (r)
+	if (r) {
 		dev_err(&pdev->dev,
 			"could not register clock provider: %s: %d\n",
 			pdev->name, r);
+		return r;
+	}
+
+	r = en7523_reset_register(&pdev->dev, np_base, soc_data);
+	if (r) {
+		dev_err(&pdev->dev,
+			"could not register reset controller: %s: %d\n",
+			pdev->name, r);
+		of_clk_del_provider(node);
+		return r;
+	}
 
-	return r;
+	return 0;
 }
 
 static const struct en_clk_soc_data en7523_data = {
@@ -480,6 +660,11 @@ static const struct en_clk_soc_data en7581_data = {
 		.unprepare = en7581_pci_unprepare,
 		.disable = en7581_pci_disable,
 	},
+	.reset = {
+		.bank_ofs = en7581_rst_ofs,
+		.idx_map = en7581_rst_map,
+		.idx_map_nr = ARRAY_SIZE(en7581_rst_map),
+	},
 	.hw_init = en7581_clk_hw_init,
 };
 
Signature · 1 line
2.45.0
#7 lore raw

PATCH v2 4/4 clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC

In reply to Lorenzo Bianconi

Get rid of prepare and unpreare callbacks for PCIe clock since they can be modeled as a reset line cosumed by the PCIe driver (pcie-mediatek-gen3)

---
 drivers/clk/clk-en7523.c | 41 ++--------------------------------------
 1 file changed, 2 insertions(+), 39 deletions(-)
drivers/clk/clk-en7523.c +2 -39
index 20edfb2c43c7..781aaae68d68 100644
@@ -359,9 +359,8 @@ static struct clk_hw *en7523_register_pcie_clk(struct device *dev,
 	cg->base = np_base;
 	cg->hw.init = &init;
 
-	if (init.ops->disable)
-		init.ops->disable(&cg->hw);
-	init.ops->unprepare(&cg->hw);
+	if (init.ops->unprepare)
+		init.ops->unprepare(&cg->hw);
 
 	if (clk_hw_register(dev, &cg->hw))
 		return NULL;
@@ -379,23 +378,6 @@ static int en7581_pci_is_enabled(struct clk_hw *hw)
 	return (val & mask) == mask;
 }
 
-static int en7581_pci_prepare(struct clk_hw *hw)
-{
-	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
-	void __iomem *np_base = cg->base;
-	u32 val, mask;
-
-	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
-	       REG_RESET_CONTROL_PCIEHB;
-	val = readl(np_base + REG_RESET_CONTROL1);
-	writel(val & ~mask, np_base + REG_RESET_CONTROL1);
-	val = readl(np_base + REG_RESET_CONTROL2);
-	writel(val & ~REG_RESET2_CONTROL_PCIE2, np_base + REG_RESET_CONTROL2);
-	usleep_range(5000, 10000);
-
-	return 0;
-}
-
 static int en7581_pci_enable(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
@@ -412,23 +394,6 @@ static int en7581_pci_enable(struct clk_hw *hw)
 	return 0;
 }
 
-static void en7581_pci_unprepare(struct clk_hw *hw)
-{
-	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
-	void __iomem *np_base = cg->base;
-	u32 val, mask;
-
-	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2 |
-	       REG_RESET_CONTROL_PCIEHB;
-	val = readl(np_base + REG_RESET_CONTROL1);
-	writel(val | mask, np_base + REG_RESET_CONTROL1);
-	mask = REG_RESET_CONTROL_PCIE1 | REG_RESET_CONTROL_PCIE2;
-	writel(val | mask, np_base + REG_RESET_CONTROL1);
-	val = readl(np_base + REG_RESET_CONTROL2);
-	writel(val | REG_RESET_CONTROL_PCIE2, np_base + REG_RESET_CONTROL2);
-	msleep(100);
-}
-
 static void en7581_pci_disable(struct clk_hw *hw)
 {
 	struct en_clk_gate *cg = container_of(hw, struct en_clk_gate, hw);
@@ -655,9 +620,7 @@ static const struct en_clk_soc_data en7523_data = {
 static const struct en_clk_soc_data en7581_data = {
 	.pcie_ops = {
 		.is_enabled = en7581_pci_is_enabled,
-		.prepare = en7581_pci_prepare,
 		.enable = en7581_pci_enable,
-		.unprepare = en7581_pci_unprepare,
 		.disable = en7581_pci_disable,
 	},
 	.reset = {
Signature · 1 line
2.45.0